Maharashtra State Bureau Of Textbook Production And Curriculum Research Tender

Providing to contraction joints polysuphide sealent (Pouring grade) confirming to BS : 5212 ­ 1989 into sawed groove widened at top for sealent reservoir of specified size and shape as per detailed drawing including fixing Polyethylene foam backer rod of required diameter (appraox. 25% larger than the initial 3 mm.to 4 mm. joint) overlaid with bond breaking tape as per detailed drawing. Item includes cleaning the joints with water jet / air compressor & allowing joint to become thoroughly dry before sealent is applied and applying primer.(A) Contraction & longitudinal joints (15 mm. deep x 8 mm.wide) (S.S.R. 2017-18 Page No.44 Item No.195)

Supplying hard murum/ kankar at the road site, including conveying and stacking complete. (S.S.R. 2017-18 Page No. 23 Item No.106)

Spreading hard murum for side width etc. complete (S.S.R. 2017-18 Page No. 23 Item No.107)

Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge (S.S.R. 2017-18 Page No.79 Item No.295)

Royalty for Material (As per Royalty Statement)

Test For Aggregate (Water Absorption, Specific Gravity, Impact/Crushing Value)

Test For Aggregate (Sieve Analysis)

Test For Murum (Liquid limit & plastic Limit.)

Test For Murum (Sieve Analysis (Gradation))

Test For M-30 Concrete (Compressive Strength of C.C. Cube (Set of 3 cubes))

Test For M-30 Concrete (Concrete Mix Design)