Maharashtra State Bureau Of Textbook Production And Curriculum Research Tender
Search from over 12139+ business opportunities that have been announced from the biggest Mahatenders, e tender Maharashtra, Maharashtra government tenders, and the Online Tender Notices posted on Maharashtra e tenders till date. Find opportunities that have come in from the multiple corporations, Maharashtra government departments, State PSUs, and Private companies from the state.
Maharashtra State Bureau Of Textbook Production And Curriculum Research Tender
Eprocure
Opening Date11 Oct 2018
Closing Date16 Nov 2018
Tender Amount₹ 5,51,85,238
Costs
EMD
0Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
CONSTRUCTION OF NEW WAREHOUSE BUILDING with ancillary works AT MSBTs Existing Campus at plot No. P-41, Shiroli M I D C, Kolhapur. (MAHARASHTRA)
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2018_BTPCR_359861_1Bid Award Id
ViewTender No
Kolhapur/01/2018-19Tender Authority
Maharashtra State Bureau Of Textbook Production And Curriculum Research ViewPurchaser Address
-Website
http://http://ebalbharati.in/index.html
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Excavation for foundation in hard rock (Blasting Prohibited) by chiselling wedging, line drilling etc. including trimming and levelling the bed, removing the excavated material upto a distance of 50 meters beyond the building area including stacking/Disposal as directed dewatering and back filling with available earth / murum ramming, watering completed (lift upto 1.5 m)
363.38085
-
-
Filling in plinth and floors with approved excavated materials in 15 cm to 20 cm layers including watering and compaction complete.
156.52200000000002
-
-
Filling in plinth and floors with contractor’s soil, sand or murum in 15 cm to 20 cm layers including watering and compaction etc complete as directed by Engineer
234.783
-
-
Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete.
235.0002
-
-
Removing excavated materials(Hard rock) and depositing where directed (Lead upto 5km)
363.38085
-
-
Removing excavated materials(Hard murrum) and depositing where directed (Lead upto 5Km)
1907.7308249999996
-
-
Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed designs and drawing including fixing in position without connecting plates, braces etc. and one coat of anticorrosive paint and over it two coat of oil paintings of approved quality and shade complete.
2
-
-
Providing and laying in situ, cement concrete in M-10 of trap/granite/quartzite/gneiss metal for foundation and bedding including bailing out water, formwork, compacting and curing complete.
255.28348125000002
-
-
Providing and laying in situ cement concrete M-25 of trap/granite/quartzite/gneiss metal for R.C.C. work in foundations like raft, strip, foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, formwork, compaction, curing and roughening the surface if special finish is to be provided ( Excluding reinforcement & structural steel ) complete.
214.20000000000002
-
-
Providing and casting in situ cement concrete M-30 of trap/granite/quartzite/gneiss metal for R.C.C. columns as per detailed designs and drawings or as directed including centering, formwork, compacting and roughening if special finish is to be provided and curing complete. (Excluding reinforcement)
158.124
-
-
Providing & casting in situ cement concrete M-30 of trap/granite/quartzite/gneiss metal for R.C.C. beams and lintels as per detailed desings and drawings or as directed including centering form work, compaction and roughening the surface if special finish is to be provided and curing complete. ( Excluding reinforcement)
117.876
-
-
Providing and casting in situ cement concrete M 30 of trap/granite/quartzite/gneiss metal for R.C.C. slabs and landings canopy, waist slab with steps as per detailed designs and drawings including centering, formwork, compacting and roughening the surface if special finish is to be provided and curing , with Vaccum dewatering process complete. (Excluding reinforcement).
477.59999999999997
-
-
Providing and casting in situ cement concrete M-30 of trap/granite/quartzite/gneiss metal for R.C.C. chajja as per detailed designs and drawings including centering, formwork, compacting and roughening the surface if special finish is to be provided and curing , complete. (Excluding reinforcement).
15
-
-
Providing and casting in situ cement concretem M-25 of trap/granite/quartzite/gneiss metal for R.C.C. pardi 75 mm thick, fins including centering, formwork, compacting and roughening them if special finish is to be provided and curing complete. ( Excluding reinforcement).
108.4
-
-
Providing and casting in situ cement concrete M-20 of trap/granite/quartzite/gneiss metal for R.C.C. coping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including centering, formwork, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement).
17
-
-
Providing and fixing in position TMT-FE-500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams, columns, canopies, staircase, newels, chajjas, lintels, pardis, copings, fins, arches etc. as per detailed desings, drawings and schedules including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.
152.74
-
-
Providing second class Burnt Brick masonry with conventional / I.S. type bricks in cement mortar 1:6 in plinth as backing in composite masonry including bailing out water, striking joints, racking out joints and watering Complete.
33.0435
-
-
Providing Autoclaved Areated Convrete Block masonary of ecolite or equivalent make confirming IS 2185 (Part III) 1984 in extra fine jointing morter of fixoblock of ultratech or equivalent in super structure including striking joints, racking out joints & scaffolding complete.
240.3345
-
-
Providing second class Burnt Brick masonry with conventional / I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of 2 bars of 6 mm diameter / 2 hoop iron strips 25 mm x 1.6 mm at every third course, properly bend and bonded at ends scaffolding, racking out joints and watering complete.
25
-
-
Providing uncoursed rubble masonry of trap/granite/ quartzite/gneiss stones in cement mortar 1:6 in foundation and plinth of inner walls/in plinth of external walls including bailing out water, striking joints on un exposed faces and watering complete.
94.089
-
-
Providing and laying damproof course 50 mm thick in (1:2:4) cement concrete layer and bitumen / using cement with waterproofing compound curing, formwork etc.complete.
25
-
-
Providing and fixing 20 to 25mm thk rough shahabad box type waterproofing to vertical outside faces of reinforced cement concrete for basement or underground floor including filling the gap of 25mm between rough shahabad and RCC walls with cement grout mixed with conceal, setcrete (RMW), algaeproof or other alike water proofing liquids, raking of joints upto 35mm depth, filling the joints with 6mm size crushed metal, hand grouting with cement slurry, curing & cleaning, with 7years guarantee on court fee stamp of Rs.100/- with ponding test etc complete (excluding cement concrete 1:3:6 base concrete)
28
-
-
Providing and laying jointless Polydee-LM, a highly flexible elastometric coating for RCC / cementitious surface for terrace waterproofing on B.B. Coba / R.C.C, after application of TP-42 Primer on perfectly clean surface (free from loose dust and foreign matter) application of 1st coat of Polydee-LM @ 700 gms/sqm and applying 2nd coat of Polydee-LM @ 700 gms/sqm
and finishing the same with sprinkling the AG-10 granules on the wet coating. (After finishing covering the treatment with 25mm cement plaster for protection with fibrillated 6mm Plyplast fibre @ 125 gms/sqm to be paid in separate item.) covering 7 years guarantee on Court Fee Stamp Paper of Rs. 100/- etc. complete.
2490
-
-
Providing water proof bedding for flooring of Bath and WC 25 mm thick in C.M. 1:3 including using 1 Kg of water proof compound per bag of cement including levelling curing etc. complete.
40.99679999999999
-
-
Providing and applying water proofing treatment using acrylicpolymer modified cement based water proofing coating withfibre glass mesh mixing at the rate of powder to liquid (2:1) byweight covering 9 to 10 sqm /kg with two coat using Dr. Fixit or alike of chemicals for masonary and concrete surface by brush covering 7 years guarantee on stamp papers etc. complete.
1910.09648
-
-
Providing and applying gypsum plaster (with gypsum material of Gypsum India/ Mega Sign or equivalent make) with finishing with gypsum material with required thickness to newly brick/concrete surface in all position including preparing and finishing the surface, scaffolding etc. complete.
3727.5
-
-
Providing sand faced plaster externally in cement mortar using approved screened sand in all positions including base coat of 15 mm thick in C.M. 1:4 using waterproofing compound at 1 Kg. per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment of 6 to 8 mm thick in C.M. 1:4 finishing the surface by taking out grains and curing for fourteen days, scaffolding, spray plaster etc. complete.
1265.25
-
-
Providing internal cement plaster 12mm thick in single coat incement mortar 1:4 without neeru finish to concrete or bricksurfaces, in all positions including scaffolding and curing etc.complete.
50
-
-
Providing and applying Texture plaster with finishing with Purlina/ Rustic texture material (with texture material of Asian/ Renava/ Nitco/ Temtex or equivalant company make) in 3 to 4 milimeter thickness on previously finished plastered surface including plaster Groove 6mm thick or Tape Grooves 35 to 45 mm thickness or as required in all postion including preparing the surface scaffolding etc. complete. ( Excluding texture Paint and Texture Paint Finishing)
4265.25
-
-
Providing and laying polished machine cut Kotah Stone slabs 20 mm to 25 mm thick for treads and risers of steps and midlanding of staircases with rounded nosing for the treads on a bed of 1:4 cement mortar including cement float, filling joints with neat cement slurry, curing, polishing and cleaning complete.
88
-
-
Providing and laying Antiskid Ceramic tiles of approved quality of size 30 cm x 30 cm and confirming to IS 15622-2006 (Group-B IIA) for antiskid flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. complete.
35.4568
-
-
Providing and laying ceramic tiles of approved quality 30cm x 30cm x 5mm for dado and skirting in required position with ready made adhesive mortor of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colur cement slurry cleaning curing complete.
131.68
-
-
Providng and laying in situ cement concrete M25 with tremix treatment for 200 mm thickness for flooring with groove cutting of 4 mm wide and 20 mm deep with neessary refilling with bitumen etc. complete.
512.316
-
-
Providng and laying in situ cement concrete M20with tremix treatment for 100 mm thickness for flooring with groove cutting of 4 mm wide and 20 mm deep with neessary refilling with bitumen etc. complete.
1250
-
-
Providing and laying vitrified matt finish decorative type tiles of size 590mm to 605mm x 590mm to 605mm of 8 to 10mm thickness and confirming IS.15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc. complete. Note: (Water absorption should not be more than 0.05%) a) Flooring
423.79689999999994
-
-
Providing and laying vitrified matt finish decorative type tiles of size 590mm to 605mm x 590mm to 605mm of 8 to 10mm thickness and confirming IS.15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc. complete. Note: (Water absorption should not be more than 0.05%) b) Skirting
22.188000000000002
-
-
Providing and fixing green marble of 18 to 20 mm thick for door frame/dado/window boxing etc. on C.M. 1:6 including filling joints with polymer base filler nosing the sharp edges wherever necessary, curing, etc. complete.
127.039
-
-
Providing and fixing heavy duty inter locking concrete Gray Paving blocks of 60mm thickness of having a strength of 300 kg/Sq.cm. of approved auqlity and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc. complete.
300
-
-
Providing and laying 6 mm thick mastic asphalt wearing course on top of deck slab excluding prime coat with paving grade bitumen meeting the requirements given in table 500-29, prepared by using mastic cooker and laid to required level and slope after cleaning the surface including providing antiskid surface with bitumen precoated fine grained hard stone chipping of 4.75 mm nominal size at the rate of 0.005 cum per 10 Sqm and at an approximate spacing of 10 cm center to center in both directions, pressed into surface when the temperature of surfaces not less than 100 deg C, protruding 1mm to 4mm over mastic surface as per clause 515 etc. complete
2524
-
-
Providing and applying two coats of water proof cement paint of approved manufacture and of approved colour to the plastered surfaces including scaffolding if necessary cleaning and preparing the surfaces, watering for two days complete.
1444.14
-
-
Providing and applying two coats of textured synthetic paint of approved shade and quality and one coat of primer before applying textured paint including scaffolding if necessary preparing surface by thoroughly cleaning oil, grease, dirt and other materials as required, etc. complete.
4265.25
-
-
Providing and applying washable oil-bound distemper of approved colour and shade to old & new surfaces in two coats including scaffolding, preparing the surfaces (including the primer coat.) complete.
3529.1
-
-
Providing and applying Plastic emulsion paint of approved quality colour and shade to old & new surfaces in two coats including scaffolding, preparing the surfaces ( including the primer coat.) complete.
2079.1587
-
-
Providing and applying putty to old plastered surfaces in twocoats to receive approved paint in all positions including allmaterials,labour scaffolding and curing etc. complete.including necessary sockets/union nut etc. complete.
1579.1587
-
-
Providing and applying priming coat over new wood and woodbased surfaces, including preparing the surface by thoroughlycleaning oil, grease, dirt and other foreign matter, sandpapering and knotting, scaffolding etc. complete.
105.84
-
-
Providing and applying primer coat for internal wall surface and celling including scaffoldin to receive oil bound distempertreatment etc. complete.hooks as per drawing supported on M.S. angle 50 x 50 x 6 mm
1579.1587
-
-
Providing and fixing frame with / without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete
0.45
-
-
Providing and fixing solid core flush door shutter commercial in single leaf 32mm thick without ventilator commercial type of exterior grade as per detailed drawings with wrought iron hold fast, iron oxidised fixtures and fastenings and handles on both sides and finishing with oil painting 3 coats complete.
40.32
-
-
Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9mm with lock plate of 3.15 mm thickness reinforced with 35x35x5mm angle section fitted with sliding bolts and handles for both sides, deep M.S. channel section of depth and thickness not less than 65 mm and 3.15 mm respectively with hold fast arrangements, M.S. Bracket plate 300 x 300 x 3.15 mm minimum size and shape with square bar suspension shaft of minimum 32mm diametre, hood cover of M.S. sheet not less than 0.9 mm thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade cast iron or mild steel and one coat of red lead primer etc. complete. (I.S. 6248 - 1979)
24
-
-
Providing and fixing in position anodised (as per I.S. 1868/1982) aluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 Kg/Rmt. and window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 Kg/Rmt. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 Kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 Kg/Rmt. Inter locking section 40 x 18 x 1.25 mm at weight 0.469 Kg/Rmt. And handle section 52 x 18 x 1.13 mm at weight 0.488 Kg/Rmt and top section 40 x 18 x 1.25 mm at weight 0.417 Kg/Rmt. as per detailed drawing and as directed by Engineer- In-Charge with all necessary aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass with all required screws and nuts etc. complete.
497.75399999999996
-
-
Providing and fixing fiber glass reinforced polyster door shutter 35 mm thick as per IS 14856 (2000) (Reaffirmed 2006) without ventilator including chromium plated fixtures and fastening with chromium plated handles on both sides, etc complete. Spec. No.: As directed by engineer-in-charge.
18.900000000000002
-
-
Providing and fixing in position, Single shuttered aluminium extruded powder coated openable door of Specified size with aluminium door frame of powder coated section 101.60 x 44.75mm , 3.18 mm thick and shutter comprising of powder coated section having bottom and lock rail of size 150 mm x 44.5 mm , 2.90 mm thick top rails 47.62 x 44.45 mm , 3.18 mm thick , vertical style 47.62 x 44.45 mm, 3.00 mm thick and for shutter plain glass panes 5 mm thick for top panels and 12mm thick both side laminated phenol bonded particle board panels for bottom panels etc. , I.S.I. mark , heavy duty, Hydraulic floor spring of 150 kg capacity , having heavy duty concealed lock, necessary beading, glazing clips , PVC gaskets, 250mm length tower bolts, 150mm diam. pad handle, etc. as per detailed design and drawing or as directed by engineer in charge including all materials , labours, and equipment etc Spec. No.: As directed by Engineer in charge.
85
-
-
Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete. Spec. No.: As directed by Engineer in charge.
10
-
-
Providing and fixing frame work of galvenised irom for suspended false ceiling which includes galvenises iron perimetre channels of size 27 mm & 0.5 mm thick having one flange of 20 mm and another of 30 mm along with perimeter of the ceiling, fixing in brick wall/partition with the help of rawal plugs and screws, suspending galvenised iron intermediade channels of size 45 mm and 0.9 mm thick with two flanges of 15 mm each from the soffit at 1200 mm centres with steel galvenised iron hanger of width 25 mm x 0.5 mm fasteners, ceiling section of 0.5 mm thickness having curved wedge of 51.5 mm and two flanges of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with the help of connecting clips and in direction perpendicular to the intermediate channel at 450 mm centres, 12.5 mm dry walls screws at 230 mm centres; fixing screws mechanically either with screw driver or drilling machine with suitable attatchment etc, complete.
Spec. No.: As directed by Engineer in charge.
325
-
-
Providing and fixing false ceiling of plain asbestos cement sheets 4 mm thick with teak wood beadings 45 x 12 mm with frame work of teak wood battens of size 70 x 60 mm at 1.00 M center to center including scaffolding, if necessary, all iron work and painting (visible surfaces) to A.C. sheet and beading in two coats etc. complete. (excluding T.W. runner to be paid separately).
325
-
-
Providing & Fixing Table type A of size (2.200+1500)x0.75x0.75 m with following specifications, Table made up of 19 and 12mm commercial Ply (Century/Kitply) Confirming IS 303,12mm Toughened glass with Bevelled edges on the top,with approved Laminate (Steamed beach- Century) finished ,Zinc plated M.S. Telephonic drawer channel,Storage with sliding shutters, C.P. Brass Handle and best quality drawer lock fixtures and fastenings etc.complete.as per Architects Drawing and instructions of Engineer In Charge.
3
-
-
Providing & Fixing Table of Type B of size 2.00x0.75x0.75 m with following specifications, Table made up of 19 and 12mm comercial ply (Century/Kitply) Confirming IS 303 with approved Laminate (steamed Beach-Century) finished,Zinc coated M.S. Telescopic drawer channel, 4" C.P. Brass Handle and Drawer lock of best quality etc.complete as per Architects Drawing and instructions of Engineer In Charge.
5
-
-
1500 L X 1500 x 1200 HT -Workstation : Partition Ht 1200mm TABLE TOP : 25 MM thk. Preaminated PB board with 2mm PVC Edge band to all Exposed Area.UNDERSTRUCTURE : Powder coated , one magnetic board, main spine 50mm thk, return partition will be 50 mm thk & 1200 mm in Ht. , fixed pedestal 2D& 1f w/o kbt & Cpu Provision to pull cable of elecatical and data n to fix Electrical switch above table top, socket below and Data voice at skirting level.
4
-
-
Providing and supplying stainless steel finish perforated benches (Three seater) sample approved by and as directed by Engineer in charge / Interior Designer.
5
-
-
Providing & supplying Revolving chair at site of work including, fixing etc.complete. Sample approved by and as directed by Engineer in charge / Interior Designer
12
-
-
Providing & supplying Meeting room /staff chairs/Cabin / cubical visitors chairs (Medium Back) gas lift & tilting chair at site of work including, fixing etc.complete. Sample approved by and as directed by Engineer in charge / Interior Designer
32
-
-
Providing and fixing Venetian blinds for windows of Vista Levoler make of required size as per instructions of site in charge
85
-
-
Providing and fixing mild steel grill work for windows, ventilators etc. 20 Kg./Sq.M. as per drawing including fixtures, necessary welding & painting with one coats of anticorrosive paint & two coats of oil painting complete.
729.5039999999999
-
-
Providing and erecting Y type barbed wire fencing with sevenrows of wire with 2.45 mm dia G.I. pipe ( Rezan/concentiDeleted ire 0.75 mm dia ) with hot dip and G.I. coatedhooks as per drawing supported on M.S. angle 50 x 50 x 6 mm
425.21
-
-
Providing and fixing concertina coil fencing with required dia 450 mm (having 15 nos.round per 3 m length) upto 3 m height of wall with existing angle iron 'Y' shaped placed 2m apart and with 8 horizontal R.B.T studs tied with G.I. staples and G.I. clips to retain horizontal incl. necessary bolts or G.I barbed wire tied to angles iron all complete as shown/directed with reinforced barbed tape (R.B.T.) /spring core (2.5 mm th) wire of high tensile strength of 165 kg/sqmm with tape (0.52 mm th) and weight 43.478 gm/metre.
425.21
-
-
Providing and fixing mild steel grill gate as per the detailed drawing including hinges, locking arrangements and painting in three coats of oil paint of approved colour and shade etc. complete.(Weight of gate 35 Kg/smt.) Spec.No.: As directed by Engineer- in-charge.
40
-
-
Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating the bottom surface and sides for excavation clorophyriphoas/lendene at the rate of 5 liters of emulsion concentrates of 0.5 percent of Aldrin per square meter of surface area covering 10 years guarantee.
358.84200000000004
-
-
Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) treatment by treating the backfill in immediate contact with foundation at the rate of 7.5 liters of emulsion concentrates of 0.5 percent of Clorophyriphas/ Hephoclore per square meter of vertical surface area covering 10 years guarantee.
525
-
-
Conveying materials obtained from road cutting including all lifts, laying in layers of 20 cm. to 30 cm. breaking clods, dressing to the required lines, curves, grades and section, for a lead of over 300 to 500 m. inclusive from the site of excavation to the site of deposition as directed.
375
-
-
Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting with Intelligent Compactor with compaction analyzer and V-Sat attachment. to the required density. Grading I
75
-
-
Compacting the hard murum / kankar (upto 200mm loose) with power roller including artifical watering complete.
500
-
-
Providing and fixing H.D.P container Sintex or equivalent make one piece moulded water tank made out of high density polythyler and built corrugation including of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow of all tanks capacity above 1000 to 20,000 litres Spec. No.: As directed by engineer-in-charge.
10000
-
-
Providing & fixing on walls / ceiling / floors 15 mm dia heavy grade having embossed as ISI Mark galvanised iron pipes weight of 1.48 kg/metre with necessary fittings & remaking good the demolished portion and with primer oil paint and 2 coats etc. complete.
Spec. No.: Bd. V. 5 Page No. 551
100
-
-
Providing & fixing on walls / ceiling / floors 20 mm dia heavy grade having embossed as ISI Mark galvanised iron pipes weight of 3.01 kg/metre with necessary fittings & remaking good the demolished portion and with primer oil paint and 2 coats etc. complete.
42
-
-
Providing & fixing on walls / ceiling / floors 25 mm dia heavy grade having embossed as ISI Mark galvanised iron pipes weight of 3.01 kg/metre with necessary fittings & remaking good the demolished portion and with primer oil paint and 2 coats etc. complete.
Spec. No.: Bd. V. 5 Page No. 551
35
-
-
Providing and fixing 1st class white glazed earthenware Orissa Type W.C. Pan of Hindustan / Perryware / Neycer / Cera or equivalant make 575 mm including P or S trap cast iron soil and vent pipe upto the outside face of the wall (1:5:1 0) cement concrete bedding 15 mm thick, 10 liter P.V.C. low level flushing cistern with all necessary pipe connection etc. complete. Spec. No.: As directed by Engineer in charge.
2
-
-
Providing and fixing European type wall-hung white water closet of Hindustan / Perryware / Neycer / Cera or equivalant make with push valve concealed type with cover plate 32mm size of JAQUAR MAKE SERIES FLV-1095 including soil pipe ,vent pipe up to outside face of wall ,100mm dia. G.I. plug bend inlet pipe all fittings, cutting& making good walls, floors etc. complete. Spec. No.: As directed by Engineer Incharge
10
-
-
Providing and fixing colour glazed earthenware lipped flat back/corner type Urinal of Hindustan / Perryware / Neycer / Cera or equivalant make with PVC 5 liters flushing system of 5 liters with fittings, inlet pipe with stop tap, brackets for fixing the cistern, 32 mm diameter P.V.C. flush pipe with fitting including lead soil pipe, lead trap & soil pipe connection up to the outside face of wall. Spec. No.: Bd.V.26 Page No. 564
4
-
-
Providing and fixing white glazed earthenware Wash Hand Basin of Hindustan / Perryware / Neycer / Cera or equivalant make of size 63cm. x 45 cm. including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap bottletrap and necessary pipe connections including P.V.C. waste pipe and trap up to the outside face of the wall. Spec. No.: Bd.V.30 Page No. 614
10
-
-
Providing and fixing Oval Type Under Counter Wash Hand Basin of 400 mm x 560 mm size and of special colour shade having Telephonic Black / Colour Granite of 18 mm thick fixed on Black Kadappa Framework, including Chromium Plated Coupling Bottle-Trap using Cera Company or equivalent Oval Type Wash basin Model No 3448 as per detailed drawing or as directed by Engineer-In- Charge etc. Complete Spec. No.: As directed by Engineer Incharge
2
-
-
Providing and fixing stainless steel sink of size 600 x 510 x 200 mm of Nirali or equivalent make incluidng coupling, outlet pipe, elbow and other necessary fitting, finishing etc. complete. Spec. No.: As directed by Engineer in charge
1
-
-
Providing and fixing 15 cm rigid PVC Nahani trap including PVC grating ,bend, connecting piece of UPVC pipe up to the outside face of wall ,making the good damaged surface and testing etc. complete ( Prior approval of sample and brand by Ex. Engr. is necessary before use) Spec. No.: Specfications Bd V 32 Page No. 615
10
-
-
Providing and fixing 15mm diameter screw down bib/ stop tap of brass including necessary socket union nut complete. Spec. No.: Bd.V.8 Page No. 601
4
-
-
Providing and fixing 110 MM dia stabiliser pipe / U.P.V.C. SWR soil vent/waste pipe of Prince / Sudhakar / Kishan / Supreme or equivalent make (conforring to 15 spal) and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. com-plete. Spec. No.: As directed by Engineer in charge.
200
-
-
Providing and fixing 15cm x 10cm salt glazed stoneware gully trap in cement concrete 1:4:8 outside the building including cast iron grating in the sink, connecting glazed stoneware pipe, brick masonry chamber with cast iron lid and cast iron grating for the gully trap. Spec. No.: Bd.V.38, Page No. 623
10
-
-
Providing & constructing Brick Masonry Inspection Chamber . 60cm x 45cm x 90cm. size including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and airtight .with RCC cover with frame fixed in cement concrete etc. complete. Spec. No.: Bd.V.43, Page No. 626
15
-
-
Providing and fixing C.P. Angular stop cock with wall flange jaquar make continental (CAT.NO. CON-059) including necessary sockets/union nut etc. complete. Spec. No.: As directed by Engineer in charge
12
-
-
Providing and fixing C.P. pillar cock long neck with aerator jaquar make continental (CAT.NO. CON -021) including necessary sockets/union nut etc. complete. Spec. No.: As directed by Engineer in charge
12
-
-
Providing and fixing C.P. BIB cock with wall flange jaquar make continental (CAT.NO. CON- 047) including necessary sockets/ union nut etc. complete Spec. No.: As directed by Engineer in charge
10
-
-
Providing and fixing C.P. sink cock with raised J shaped swinging casted spout jaquar make continental (CAT.NO. CON -359) including necessary sockets/ union nut etc. complete. Spec. No.: As directed by Engineer in charge
1
-
-
Providing and fixing C.P. wall mixer with provision for overheadshower with 115mm long bend pipe and wall flange jaquar orequivalent ?make continental (CAT.NO. CON-273 UPR)including necessary sockets/union nut etc. complete.
4
-
-
Providing and fixing C.P.Two way BIB cock jaquar make orequivalent continental (CAT.NO. CON-041) including necessarysockets/union nut etc. complete.including necessary sockets/union nut etc. complete.
2
-
-
Providing and fixing 10 cm PVC nahani trap with grating etc. comlpete.
12
-
-
ELECTRICAL INSTALLATION WORK
-
-
-
LIGHTING / POWER DISTRIBUTION BOARDS
-
-
-
Supply, installation, Testing & Commissioning of Distribution Board as per following Description.
-
-
-
Ready made, Lockable, M.C.B. Incommer, Horizontal series type Metal Distribution boards. The distibution board should be wall/ recess mounting, dust and vermin proof, IP 54, following complete with suitably rated PVC insulated copper busbars with interconnections and neutral bar assembly, earthing terminals.
-
-
-
Note :The DBs supplied at site during civil construction activity should be supplied with proper protection to avoid any physical damage or ingress of water /cement during construction.
-
-
-
Note : Consider 30 ma ELCB in all power and lighting distribution boards and 100 ma ELCB in all UPS distribution boards.
-
-
-
A circuit identification card in clear plastic cover shall be provided for each distribution board.
-
-
-
All distribution boxed shall be as per IEC 61439 and made by approved/licenses MCB/DP manufacturer. The bus bar shall be such that circuit could be isolated easily. Neutral bus bars shall be provided with the same number of terminals, as there are single ways on the board, in addition to the terminals for incoming mains. An earth bar of similar size at the neutral bar shall also be provided.
-
-
-
Equivalent to Legrand Make
-
-
-
For New Building
Supply, Installation, Testing and commissioning of TPN DB as per specifications and relevant IS/IEC standard. (LDB-1/2/3)
1
-
-
Incoming : 63 A FP MCB (10 kA rating )
1
-
-
Outgoing: 3 Nos. 25 A DP ELCB- 30 mA
3
-
-
2 Nos 40 A FP MCB ( 10 kA rating )
2
-
-
6 Nos 6/10/16/20/25/32 A SP MCB ( 10 kA rating )
6
-
-
Supply, Installation, Testing and commissioning of TPN DB as per specifications and relevant IS/IEC standard. (LDB-2/3)
2
-
-
Incoming : 40 A FP MCB (10 kA rating )
2
-
-
Outgoing: 3 Nos. 25 A DP ELCB- 30 mA
6
-
-
6 Nos 6/10/16/20/25/32 A SP MCB ( 10 kA rating )
12
-
-
For Existing Building Main Lighting Distribution Board (MLDB) Supplying & erecting triple pole and neutral distribution board (TPNDB) with door surface/ flush mounted suitable for 3 Pole MCCB as Incommer & outgoing SP MCB (24 Poles) or TP MCB of 8 ways (24 Poles) ,on iron/ G.I. frame. (Vertical Busbar type) as per specification No. SWSWR/MCBDB1
1
-
-
Incoming : 415V, 160A, 25kA MCCB
1
-
-
Outgoing: 6A, 10kA TP MCB - 8 nos. (6+2)
12
-
-
For Existing Building
Supply, Installation, Testing and commissioning of SPN DB as per specifications and relevant IS/IEC standard. (Ground Floor LDB-1 to LDB-12)
12
-
-
Incoming : 16A DP MCB ( 10 kA rating )
12
-
-
Outgoing: 1 Nos. 16 A DP ELCB- 30 mA
12
-
-
8 Nos 6/10/16 A SP MCB ( 10 kA rating )
96
-
-
For Existing Building
Supply, Installation, Testing and commissioning of 12 Way SPN DB as per specifications and relevant IS/IEC standard. (LDB-2/3)
6
-
-
Incoming : 40 A FP MCB (10 kA rating )
6
-
-
Outgoing: 4 Nos. 25 A DP MCB (10 kA rating )
24
-
-
CABLES AND END TERMINATIONS
-
-
-
Supply & Installation of cables on Tray/Wall/pipe
-
-
-
Supply, installation ,testing & commissioning the following cable on wall/floor/ceiling/structure member or on cable trays or down through PVC pipes, using MS spacers and GI saddles, cable clamp etc. complete in all respect.
-
-
-
Cable, conforming to IS: 1554/Part 1/1998, XLPE, Aluminium stranded conductor, armoured, 1100 V class
-
-
-
4C X 6sqmm, Cu, PVC, Armoured with continuous 5.48 sq mm (12 SWG) G.I. earth wire complete erected with glands & lugs,(LDB3)
1946.3999999999999
-
-
4C X 10sqmm, Cu, PVC, Armoured with continuous 5.48 sq mm (12 SWG) G.I. earth wire complete erected with glands & lugs, ( Lift & LDB2)
972
-
-
3.5C X70sqmm, Al, PVC, Armoured with continuous 8.35 sq mm (10 SWG) G.I. earth wire complete erected with glands & lugs, (LDB1- GF)
504
-
-
LIGHT FIXTURES
-
-
-
Supply,Installation, assembling, connection, testing & commissioning of fixtures complete with suitable rating tubes/ lamps/ high power factor improving capacitor/ HF Electronic Ballast/ Starter and all other necessary accessories to complete the installations.
-
-
-
Note : All light fixture will have Super low loss Electronics ballast with PF0.90 & +/- 10% THD harmonics within permissible limits specified as per IS,
-
-
-
Supply, installation, Testing & Commissioning of 80W LED highbay light including all necessary accessories required to complite the job.(Philips make GreenBay 80W BY400V LED70S CW SK PSU or Equivalent)
68
-
-
Supply, installation, Testing & Commissioning of 40W LED 6000K IP 65 Protectiontube including all necessary accessories required to complite the job.(Havells make ENDURA MAGNUM 40W - IP65 (with Toggles) LHEKAWN7UZ6J040
106
-
-
Supply, installation, Testing & Commissioning of 2x18W T8 LED IP 65 Protection Tube tube including all necessary accessories required to complite the job.(Havells make Magnum Retro -LHFKAWN2TC6J018
42
-
-
Supplying & erecting T8 LED 20W tube light fitting (4 feet) withpolycarbonate housing, heat sink, integrated HF electronic driver complete (including lamp).(Office, Cabin & Toilet) Havells make ENDURA LINEAR NEO- LHEWEBP5IN1W020
-
-
-
Supplying and erecting decorative oval bulk head edge-lit 10W LED luminaire comprising of high brightness LED Supplying and erecting decorative oval bulk head edge-lit 10W LED Fitting on provided PVC block / wooden board. (Lift Duct)
24
-
-
Making suitable size recess in any type of false ceiling for erection of flush type down lighter and finishing the background to match the original surface upto 20W. (Cabin)
24
-
-
Supplying and erecting CRCA /die-cast aluminium powder coated housing LED Panel light (slim edge-lit) square /round shape suitable for 19 to 24 W with provision for plane front frame with translucent cover fixed to the housing complete. (Cabin)
24
-
-
Supplying and erecting approved type LED street light fitting above 40 to 48W, having PF 0.95, class IP 65 or above. Housing of pressure die cast aluminium alloy and heat sink extruded aluminium as per specification no. FG-ODF/FLS2
60
-
-
FANS & AC
-
-
-
Supply,Installation, testing & commissioning of 225mm Dia Exhaust fan.
20
-
-
Supply,Installation, testing & commissioning of 1200mm Dia ceiling fan.
30
-
-
Supply,Installation, testing & commissioning of 300 mm Dia Cabin fan.
6
-
-
Supplying and erecting split type room Air conditioning 'unit 2 TR 5 star capacity 250V, 50 cycles, A.C. Supply 'having 1 No of air handling unit hi-wall mounting type 'complete with Refrigerants R410 A /R32 and COPPER 'CONDENSOR at position as per specification no. APAC/SAC
2
-
-
Supplying and erecting split type room Airconditioning unit 1 TR5 starcapacity 250V, 50 cycles, A.C. supply having '1 No of air handling unit hi-wall / floor mountingtype 'complete with Refrigerent R410 A/R32 and COPPER 'CONDENSOR at position as per specification no.APAC/SAC
3
-
-
LIGHTING WIRING
-
-
-
Supply, installation, connection, testing & commissioning of following outlet points as per Specification & IS. The unit rate for the point shall consist of the circuit wiring from LDB to outlet point through MCB as required & including the outlet points with connector & sockets. A point shall include in addition to phase & neutral wire, earth continuity wire from LDB to the final termination at outlet points. All the wiring, outlet points shall be done in a surface / concealed manner with ISI approved rigid GI conduit of minimum 20/25/32 mm. dia. using 650 V FRLS copper conductor wire. Supply and installation of Modular switches with suitable plate, Battens/Holders, Ceiling rose, PVC back box with brass chromium / cadmium plated machine screws etc. shall be part of job.
-
-
-
Cost of MCB shall not be considered in point rate.
-
-
-
Wire Size:
-
-
-
3C x 2.5 mm2 Cu FRLS flexible cable
-
-
-
Average Circuit Length: (Contractor has to verify average circuit length from the tender drawing. If any deviation in it then he has to define circuit length in tender bid.)
-
-
-
From DB to Primary Point: 35 MTR
-
-
-
From DB Primary Point to Secondary Light Point: 10 MTR
-
-
-
From switch board to Primary Point: 10 MTR
-
-
-
From Switch board Primary Point to Secondary Light Point: 7 MTR
-
-
-
Primary Light Point Controlled From Switchboard
24
-
-
Secondary Light Point Controlled From Switchboard
68
-
-
Primary Light Point Controlled From DB
-
-
-
Secondary Light Point Controlled From DB
-
-
-
Wiring, Submain, Swiches & Acessories
-
-
-
Point wiring for light/fan/bell in 20 mm rigid PVC conduit with 1.5 sq.mm (2+1E) FRLSH grade Copper wire with flush type switch and required accessoriesas per specification No: WG-PW/SW
-
-
-
Supplying & erecting mains with2x2.5 sq.mm F.R.L.S.H copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW + Earth Wire 1.5 sqmm FRLSH
168
-
-
Supplying & erecting mains with 2x4 sq.mm F.R.L.S.H copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW + Earth Wire 2.5 sqmm FRLSH
470
-
-
Supplying and erecting rigidPVC conduit 20 mm dia. With PVC accessories on wall / ceiling as per specification No:WG-MA/CON, para no. 1.1.1
520
-
-
Supplying and erecting rigidPVC conduit 25 mm dia. With PVC accessories on wall / ceiling as per specification No:WG-MA/CON, para no. 1.1.2
1250
-
-
Point wiring in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire, flush type switch,earthing and required accessories as per specification No: WG-PW/SW (For Office & Cabin)
35
-
-
Point wiring for independent plug in PVC trunking (casingcapping) with 1.5 sq.mm FRLSH grade copper wire, flush type switch,earthing and required accessories as per specification No: WG-PW/SW
10
-
-
Supplying and erecting modular type 3 pin 6 / 16A multi socket with safety shutter ISI mark approved make duly erected on provided plate and box with wiring connections complete.
54
-
-
Supplying and erecting modular type 3 pin 6 A socket with safety shutter ISI mark approved make duly erected on provided plate and box with wiring connections complete.
34
-
-
Supplying and erecting modulartype switch16 / 20 A with indicator, ISI mark, approved make duly erected on provided plate and box with wiring connections complete.
34
-
-
Supplying and erecting modulartype switch 6A / 10A ISI mark approved make duly erected on provided plate and box with wiring connections complete.
54
-
-
Supplying and erecting modular type telephone socket one gangwith safety shutter ISI mark approved make duly erected on provided plate and box with wiring connections complete
22
-
-
Supplying and erecting modular typebuzzer 220 / 250V ISI mark approved make duly erected on provided plate and box with wiring connections complete.
5
-
-
Supplying and erecting modular type bell-push 6A / 10A ISI mark approved make duly erected on provided plate and box with wiring connections complete.
5
-
-
Supplying and erecting 20 A starter (modular range) 2 module for AC unit on provided box complete & duly concealed with necessary material and connected. (for AC)
5
-
-
Supplying and erecting PVC Surface modular switch box with double mounting plate for 2 module duly erected in an approved manner.
14
-
-
Supplying and erectingPVC Surfacemodular switch boxwith double mounting plate for 3 moduleduly erected in an approved manner.
20
-
-
Supplying and erectingPVC Surfacemodular switch boxwith double mounting plate for 4 moduleduly erected in an approved manner.
3
-
-
Supplying and erectingPVC Surfacemodular switch boxwith double mounting plate for 6 moduleduly erected in an approved manner.
3
-
-
Supplying and erectingPVC Surfacemodular switch boxwith double mounting plate for 8 module duly erected in an approved manner.
3
-
-
Supplying and erecting ISI mark Ceiling rose / Batten holder bakelite base 6A.erected on Filled polypropylene ISI marked (IS:14772-2000) board or polished double wooden block/ ISI mark PVC junction box.
385
-
-
Supplying and erecting split type room Airconditioning
unit 1.5 TR5 star capacity 250V, 50 cycles, A.C. supply
having 1 No of air handling unit hiwall / floor mountingtype
complete with Refrigerent R410 A/R32 and COPPER
CONDENSOR at position as per specification no.APAC/
SAC
5
-
-
Wiring for plug on board with Modular Switch socket with copper wiring and earthing as per specification No:WG-PW/SW
1) For point wiring above 6 meters of length, add 10 % of overall rate of point wiring for every additional 1 meter length or part thereof.
2) Point wiring starts from Main board/Intermediate switch board and suitable circuit mains are to be provided from D.B. to first board and between boards.
3) For point wiring in stair case with 2 way control point increase overall rate by 50 % of light point wiring.
4) For wiring on stone wall add Rs 15.00 per point wiring.
5) For covering at wall entries acrylic sheet of appropriate size shall be provided. (Refer Item No. 6-1-9)
6) For concealed type wiring multistrand wires shall be used preferably.
7) Earth Wire of minimum 1.5 sq mm Shall be terminated in each point.
8) For point wiring in FRLSH wire add 2% Over Point wiring with FRLS Wire overall rate.
-
-
-
DISMENTLING WORK
-
-
-
Dismantling the existing light, fan, bell, clock, independent plugpoint, wiring including circuit mains of all types along with accessories etc.complete as per specification No:WG-DM/PW
120
-
-
Dismantling the existing Telephone / Lan / Wan / TV cables and wires of all sizes along with casing-capping / conduit complete as per specification No:WG-DM/PW
120
-
-
Dismantling the existing Aluminium/copper mains, submains wiring upto 10 sq.mm. along with accessories etc.Complete as per specification No:WG-DM/PW
65
-
-
Dismantling of existing fluorescent fittings of any type & size.
50
-
-
Dismantlingthe existing ceiling fan /exhaust fan / cabin fan /bracket fan complete with accessories, G.I. down rod, frame etc. and making the site clear.
30
-
-
Dismantling the existing cables of all types & size above 10 sq mm upto 50 sq.mm.
150
-
-
Dismantling the existing cables of all types & size above 50 sq.mm.
250
-
-
FIRE DETECTION & ALARM SYSTEM
-
-
-
Addressable Photo Electric Smoke Detector (Built in Isolator) with base. This shall be with all required accessories to commission. (for below False Ceiling and True Ceiling). Detectors shall have Vds/UL/FM Certification.Refer Technical Specification.
35
-
-
Addressable Manual Break Glass Call Point (MCP) unit with necessary fixing arrangements with key complete as required. Shall have Vds/UL/FM Certification. Refer Technical Specification.
7
-
-
Stand alone Loop Power based strobe cum sounder, adjustable sound pressure by 5 levels up to sound pressure level of 90 db, light intensity approx. 2 cd , it should be programmable from the panel. Shall have Vds/UL/FM Certification. Refer Technical Specification.
7
-
-
Control Module to control external device.(weather Proof) with relay facility suitable to provide 2A power supply continuously at 24VDC.
2
-
-
Monitor Module with built in isolator for making non addressable devices as addressable. Shall have Vds/UL/FM Certification. Refer Technical Specification.
2
-
-
Supply, Installation, Laying, Testing & Commissioning of XLPE FRLS armoured cables on cable trays, through pendants, on structural supports or clamping on wall / ceiling, include unloading, shifting upto site. The scope includes clamping of cables by ready made G.I. spacers, saddles or clamps fabricated out of M.S / AL. strip 2 mm thick, supply of all clamping materials and hardware etc., providing cable tags made out of aluminium strip and 75x20 mm in size with cable number and size punched on it. Cable tags shall be tied to cables at every 30 meter interval and at both the ends.
-
-
-
Make - POLYCAB / Avocab/HAVELLS/ ELITE
-
-
-
Stranded Copper conductor, XLPE FRLS insulated, Shielded, Armoured Cable 650 V as per IS 1554, with GI saddle spacers every 300 mm with Single compression Cable Glands, ABS Junction Boxes( wherever required ), terminals, Ferruling complete. Color Code of Cable - Outer Sheath shall be RED
-
-
-
2C x 1.5 Sqmm CU XLPE FRLS
1000
-
-
2C x 2.5 Sqmm CU XLPE FRLS
50
-
-
4C x 1.5 Sqmm CU XLPE FRLS
10
-
-
CCTV System
-
-
-
Supply, Installation, Testing , commissioning of IP based CCTV System with its all accessaries including fixing materials and complete wiring require to operate the system successfully. This BOQ shall be read in conjunction with Technical Specification.
-
-
-
Indoor Fix Dome camera shall have image sensor of 1/3 MOS with 2-3MP resolution and shall operate in 0.03 lux illumination in colour mode and 0 lux in IR mode, varifocal 2.8-10mm, H264 Compression, PoE, Min. Covering distance: 20 mtr., ONVIF interface
3
-
-
Supply, Installation, Laying, Testing & Commissioning of CAT 6, XLPE FRLS insulated, Armoured for protection with GI saddle spacers every 0.3 mtr with Single compression Cable Glands, ABS Junction Boxes( wherever required ), terminals, Ferruling complete. Including termination at Both Ends
600
-
-
FIRE HYDRANT SYSTEM
-
-
-
Above ground piping [ Hydrants ]
Supplying, installing and testing & commissioning, above ground GI pipe of heavy class ERW of following sizes conforming to IS:1239/IS 3589 along with necessary fittings like bend, tees, elbows, flanges,and painting
-
-
-
65 mm. dia
10
-
-
80 mm. dia.
9
-
-
150 mm. dia.
13
-
-
Underground Piping [ Hydrants ]
Supplying, fabrication, installation, testing and commissioning of C class G.I. pipes with necessary fittings like bend, fees, elbows, flanges, as per IS:1239 / IS 3589 - with anticorrosive wrapping coating
-
-
-
80 mm. dia
10
-
-
100 mm. dia.
10
-
-
150 mm. dia
10
-
-
Supplying, installing and commissioning CI flanged 50 mm dia."Y" type Strainer with SS mesh, suitable flanges, nuts, bolts, gaskets etc. complete.
1
-
-
Supplying and fixing cast iron double flanged 65 mm dia. Non return Valve conforming to IS 9338 with ISI mark which shall have test pressure of PN1.0 as per IS 5312 complete in CI pressure pipeline with necessary bolts, nuts, Carbon Asbestos Fibre(CAF) gasket etc duly painted with Bitumen paint including cost and conveyance of all materials, labour, incidental charges, taxes, duties, levies etc., complete as directed and approved by Engineer In Charge for the finished item of work.
1
-
-
Supplying and installing cast iron butterfly valve with matching flanges of following sizes conforming to IS-13095, ISI mark, Cast iron wafer type,slim seal with replaceble seat with SS-410 shaft, Hand lever operated. (Suitable to system pressure)
-
-
-
150 mm. dia.
1
-
-
80 mm. dia.
3
-
-
65 mm dia.
1
-
-
Hydrant Valve (Single outlet)
Supply, install, testing and commissioning of gun metal hydrant valve ,oblique type ,conforming to IS 5290 ,ISI Mark ,with G.M. blanks cap and M.S. or G.I. chain in an approved manner as per the given drawings ,specifications and instruction of Engineer in charge .Complete in all respect.
3
-
-
First aid Hose Reel Drum
Supplying and installing wall mounting swinging Hose reel drum fitted with 19 mm dia. 30m high pressure polypropylene (Polyhose) long fitted with necessary accessories complete as per specification No. FFFFA/ HV
3
-
-
Hydrant Hose
Supplying fire fighting RRL hose pipe conforming to IS:636 (Type A) and 15 metre in length, fitted with male and female instantaneous S.S. coupling confirming to IS:903, ISI mark.
6
-
-
Branch Pipe Nozzle
Supplying S.S. Branch pipe of 63mm. Dia. fitted with 20mm. Dia detachable hexagonal nozzle conforming to IS:903 ISI marked.
3
-
-
M. S. Box / Cabinets
Supplying and erecting M.S./CRCA cabinet for housing Floor Hydrant valve, hose pipe, hose reel and branch pipe (size 1000 mm x 736mm x 736 mm.) made from 16 SWG sheet and angle iron 25 mm. x 25 mm. x 4 mm. having front doors with viewing glass (8"x6") and locking arrangement with necessary fixing material such as rubber bidding etc. duly painted in post box red colour.
3
-
-
Supply and erection of of Air Cushion Tanks. (material IS 2062/2002) with air release valve, drain valve, gate valve, provision for pressure switches , pressure guages, etc inside the pump house including making inlet outlet connection with GI pipe of required length from discharge header to air cushion tank, fixing properly and securing the same to the base etc. complete in all respect having painting including two coats of approved paint over a coat of primer. The tank should be fabricated out of 8 mm thick M.S. sheet shall be cylindrical shape with 450 mm dia and 1.5 m height.The tank shall be installed on suitable legs .The legs shall be provided with M.S. plate of size 75mm x 75mm x 5mm at the bottom .The legs shall be properly fixed in suitable location .Flange connection shall be provided for connection with discharge header .The tank shall be tested at 25 kg/sq.cm.
1
-
-
Supplying & laying (including xcavation) 25 cm Dia half round RCC Hume pipe of standard thickness at required depth up to 90 cms. below road / ground surface, for enclosing provided cable & necessary back filling with light ramming to make the road/ground surface as it was (Except bitumen carpet).
30
-
-
Fire Booster Pump Supplying, installing, testing and commissioning of fire service single-stage pump of discharge capacity of 450 LPM at 35 Mt. head , Monoblock type, running at 2900 RPM with CI body S.S. impellor Pump shall be capable of furnishing not less than 150 % of rated capacity at a head of not less than 65 % of rated load. shut off head not to exceed 120 % of rated.
1
-
-
Control Panel for Booster pump (900 LPM).
Fabricating & Supply, installing, testing and commissioning of Booster pump panel with IP 65 enclosure .
Feeder for Booster pump
1 Nos.32A TPN MPCB
1 no. Star delta starter with over load relay, single phase preventor and indicating lamps with ON / OFF push buttons.
-1 No. Auto manual selector switch
1
-
-
Supply and Laying of copper armoured cable for booster pump panel to pump
-
-
-
a) 2core x 1.5 sqmm
25
-
-
a) 4core x 4 sqmm
25
-
-
SPRINKLER SYSTEM
-
-
-
Above ground Piping
-
-
-
Supplying, installing and testing & commissioning above ground GI Pipe of Heavy class ERW of following sizes conforming to IS 1239 & IS 3589 with one coat of red oxide primer & two coats of post office fire red enamel paint, etc. as per specifications. along with necessary fittings & MS angle iron supports painted with black enamel paint ,pipes to be duly tested to 1.5 times of working pressure ,in an approved manner as per given drawings ,specifications and instruction of the engineer in charge.
-
-
-
150 mm. dia.
11
-
-
100 mm. dia.
65
-
-
80 mm. dia.
25
-
-
65 mm dia.
21
-
-
50 mm dia.
76
-
-
40 mm dia.
31.5
-
-
32 mm dia.
39
-
-
25 mm dia.
466
-
-
Underground Piping [Sprinkler]
-
-
-
GI Heavy Duty C'class pipe 150 mm dia.as per IS 1239 & IS 3589 ,duly tested to 1.5 times of working pressure along with all necessary fittings, such as bends, elbows, flanges, tees, unions, couplings, expander / reducers etc including anticorrosive wrapping & coating as per IS 10221 with .,adhesive coat after one coat of red oxide primer ,in an approved manner as per given drawings, specifications and instruction of engineer in charge.
10
-
-
Providing and fixing installation control valve (Alarm Valve) with turbine type automatic alarm gong with quarter mile hooter, also with control valve drain and test drive as per manufacturer's speicifcations. (Size 150mm dia).
1
-
-
Supply installaling testing and commissioning of gun metal crome finished Ball valves with fittings of screwed end type. For Drain. 32 MM size.
3
-
-
Dial type pressure guage of 100 mm dia with necessary nipple & other fittings , mounting arrangements , also with a 15 mm ball valve.
1
-
-
Supplying and installing butterfly valve with matching flanges of following sizes conforming to IS-13095, ISI mark, Cast iron wafer type,slim seal with replaceble seat with SS-410 shaft, Hand lever operated.
-
-
-
150 mm. dia.
1
-
-
100 mm. dia.
3
-
-
80 mm. dia.
1
-
-
Supplying and erecting 15 mm (½") dia. NBCM Body chrome finished quartzoid bulb sprinkler having 68º C fixed temperature rating with deflector disc of conventional construction as per specification No. FFSPR
162
-
-
Providing, fixing ,testing & commissioning of approved make stainless steel flow switch having pair of NO/NC contacts for fire alarm signal operating on 24 VDC with all accessories as required for fixing on sprinkler line. ( wiring from switches to panels not included )
-
-
-
150 mm dia
1
-
-
100 mm dia.
3
-
-
Providing & fixing Test Connection Assembly along with fittings, such as bends, elbows, valves, flanges, unions, couplings etc.
-
-
-
50 mm dia.
3
-
-
Supply and erection of of Air Cushion Tanks. (material IS 2062/2002) with air release valve, drain valve, gate valve, provision for pressure switches , pressure guages, etc inside the pump house including making inlet outlet connection with GI pipe of required length from discharge header to air cushion tank, fixing properly and securing the same to the base etc. complete in all respect having painting including two coats of approved paint over a coat of primer. The tank should be fabricated out of 8 mm thick M.S. sheet shall be cylindrical shape with 450 mm dia and 1.5 m height.The tank shall be installed on suitable legs .The legs shall be provided with M.S. plate of size 75mm x 75mm x 5mm at the bottom .The legs shall be properly fixed in suitable location .Flange connection shall be provided for connection with discharge header .The tank shall be tested at 25 kg/sq.cm.
1
-
-
Supply of 4.5 kg of CO2 type fire extinguisher = confirming to IS2190 & IS 15683
12
-
-
Supply of 9 LTR Water type fire extinguisher = confirming to IS940
8
-
-
Providing floor mounting stand for keeping 4 Nos. of FIRE buckets 1500mm in length, 900mm in height frame made out of 30x30x4 mm angle iron with cross supports for legs, welded with 4 hooks and duly painted with one coat of red lead and two coats of silver paint.
3
-
-
LIFT
-
-
-
For Lift (Goods Lift 2speed -1768 Kg. capacity) Supplying, erecting and commissioning 2000Kg. Goods cum Passenger lift of Ground plus two upper floors having rated Speed 0.5M/S Duplex Full Collective System without attendant
having M.S. Collapsible Doors, car having MS girds bracing of adequate size, side panels of CRCA, SS Sheet of 18 gauge hairline finish chequered plate flooring with safety tacker 5, floor indicator in car and car position indicator at all landings with electronic microprocessor Control unit, full collective system, over load warning alarm, VVVF drive with suitable -
Accessories as per specification of LIFT ( Make : Escon / Similar Superior)
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements