Maharashtra Engineering Research Institute Tender

Providing and Fitting Wardrobe cum Dressing Table of Size Width -750mm, Length - 1500mm, Height - 2400mm. The Wardrobe Should be made of Commercial Plywood, 1mm Laminate (Shade,Texture, Colour should be Pre-approved) on All External/Visible Sides & 0.8mm Inner Laminate for non-Directly Visible Sides. Block Board Plywood 25mm: Front Doors/Shutters; Plywood: 25mm- All Vertical Main Supports; 18mm - For Drawer Sides, Bottom & Side Panels, Shelves, Drawers all Sides; 12mm - Back Panel. Work Should be carried out as per Detailed Drawings provided. 5mm Mirror Glass of approved grade, All Drawers with telescopic drawer units of approved make & size; All required Handles, Hinges, locks, Hardware, should be as per required standards, etc. complete

Removal, Alteration, Repairing and Refitting work of Front Door of Room with New Laminates on Both Side with approved make & Model, size; All new Handles, Aldrops, Latches, Hinges, Chains, locks, Hardware, should be as per required standards & Preapproved Model, etc. complete

Providing and fitting work of 8mm Plywood & Laminates on Both side of Front Door Ventilator of all Rooms with New Laminates on Both Side with approved make & Model, size; Materials, Hardwares, should be as per required standards & Preapproved Model, etc. complete

Providing and fixing 450mm x 900mm size superior type Belgium mirror with 16mm dia. nickel plated towel rod etc. complete

Providing and fitting 12mm Toughened Glass of size 3.5ft x 7 ft with Diamond Polish on all Sides, with Permanent Glass Frosting of Size 3.5ft x 3.5 ft on Bottom Side of the Glass, Aluminium Glazing Profile, Wall Support Sockets, Support Clamps, D Brackets, 19mm SS Pipe to Complete width of the Bathroom for Support at Top Level with Grove of 1" x 2" for Water Flow as per Site. All Materials, Hardwares, should be as per required standards & Preapproved make & Model, Lead, etc. complete

Providing and fitting Fixed BackRest on Ground Floor Rooms of Size 10.50ft x 1.50 ft or as per Site. With 12mm Commercial Plywood Back Panel & Fully Covered, Fully Upholstered with Covering Material of Leatherite, Cushioning Fabric, with Density of BackRest Cushion/Foam 28Kg/Cu.m. & thickness of 50mm(2inch minimum) with 6mm Commercial Plywood Support for Fixing . All Materials, Hardwares, should be as per required standards & Preapproved make & Model, Lead, etc. complete

Providing and fitting Fixed BackRest on First Floor Rooms of Size 16ft x 1.50 ft or as per Site. With 12mm Commercial Plywood Back Panel & Fully Covered, Fully Upholstered with Covering Material of Leatherite, Cushioning Fabric, with Density of BackRest Cushion/Foam 28Kg/Cu.m. & thickness of 50mm (2inch minimum) with 6mm Commercial Plywood Support for Fixing. All Materials, Hardwares, should be as per required standards & Preapproved make & Model, Lead, etc. complete

Providing and Fitting Rust Proof Heavy Duty Stainless Steel Ceiling Clothes Hanger/Dryer (Rise & Dry Type) of Size 5 ft x 2.5 ft with UV Protected Nylon Rope with Pulley Mechanism with Fixing Locations at walls upto bottom location of 1800mm(6ft) , 1/2inch Round Pipe/Rod of Thickness Minimum 1mm, Design, Make, Finish, Specifications Should be Preapproved, etc. complete.

Providing and Placing Nilkamal make Club Chair Season (Rust Brown / Pine Beige) of Pre-approved Colour & Design by Nilkamal Chairs. Colour Should be confirmed from Engineer-Incharge & Architect, Specification provided & Preapproved, etc. complete. aggregates and eight coarse aggregates) using

Providing and Placing 3 Seater Sofa with 1 Side Coffee Table of Size Length -1900mm, Depth -750mm, Height- 800mm Frame in 18/19mm Commercial Plywood for All Supports, 12mm Commercial Plywood for Covering /Panelling work with all required Hardware. Frame should be fully covered in Upholstered Fabric & Foam. Seat & Backrest Fixed to Frame. BACKREST: ( Covering Material - Leatherite/Fabric; Foam Density- 30kg/Cu.m; Sofa Height Without Back Cushion -500mm; Cushion Thickness -100mm; Sofa Height with BackCushion -800mm) ; SEAT CUSION (Covering Material - Leatherite/ Fabric; Foam Density- 30Kg/Cu.m, No Spring at Seat/Base/Seating, Seat Cushion Width - 510mm, Seat Cushion Thickness-125mm); ARM ( Covering Material - Leatherite/ Fabric; Foam Density- 30Kg/Cu.m, Arm Width -100mm, Arm Height-550mm); SOFA LEG ( Sofa Leg Height - 100mm, Sofa Leg Material - Heavy Duty Stainless Steel) ; & 1 Side Coffee Table of 600mm x 600mm, Height of 450mm Base made in 25mm Commercial Plywood & 4 Legs of 50x50mm each of Matching Laminate as of Bed. Colour & Fabric Materials, Specifications Should be Preapproved & confirmed from Engineer-Incharge & Architect, with All leads, Lifts, Material, Hardwares, etc. complete.

Providing and Placing 1 Seater Sofa of Size Length -800mm, Depth -750mm, Height- 800mm. Frame in 18/19mm Commercial Plywood for All Supports, 12mm Commercial Plywood for Covering /Panelling work with all required Hardware. Frame should be fully covered in Upholstered Fabric & Foam. Seat & Backrest Fixed to Frame. BACKREST: ( Covering Material - Leatherite/Fabric; Foam Density- 30kg/Cu.m; Sofa Height Without Back Cushion -500mm; Cushion Thickness -100mm; Sofa Height with BackCushion -800mm) ; SEAT CUSION (Covering Material - Leatherite/ Fabric; Foam Density- 30Kg/Cu.m, No Spring at Seat/Base/Seating, Seat Cushion Width - 510mm, Seat Cushion Thickness-125mm); ARM ( Covering Material - Leatherite/ Fabric; Foam Density- 30Kg/Cu.m, Arm Width -100mm, Arm Height-550mm); SOFA LEG ( Sofa Leg Height - 100mm, Sofa Leg Material - Heavy Duty Stainless Steel) ; Colour & Fabric Materials, Specifications Should be Preapproved & confirmed from Engineer-Incharge & Architect, with All leads, Lifts, Material, Hardwares, etc. complete.