Maharashtra Animal And Fishery Sciences University Tender

Executive Table @ 2100 Lx1800 Dx750 HT including Low Height Credestal @ 900Lx450Dx650HT Providing & Fixing of Table @2100Lx1800Dx750HT TOP & GABLE END to be made of Membrane finish with soft water fall edges & curved panel & Decorated Anodized section MODESTY PANEL to be made of 18 mm thick Medium Density Fiber board with both side decorative laminate 1mm thick of approved quality with PVC edge band. INCLUDING CREDESTAL @ 900L X 450D X 650H :To be made out of Membrane Finish ( 2 Openable Shutter & 3 Drawer Pedestal in between )

Providing and Fixing Full Height Storage with shelf . The Full Height Storage side panels and doors are made up of 18mm thick Medium Density Fiber board with both side decorative laminate 1mm thick of approved quality. All exposed edges are sealed with 2mm thick PVC edge Banding. The shelves are made of 18mm thick Medium Density Fiber board with decorative laminate on both sides. The top is made of 36mm prelam particle board with decorative laminate on both sides. (18mm Medium Density Fiber board and 18mm batons on all sides to achieve 36mm overall thickness). The exposed edges of the top are sealed with 2mm thick PVC edge Banding. One drawer of size 400(W) x 150(H) x 450 (D) made of 18mm thick Medium Density Fiber board has been considered. The drawer will have a multipurpose lock of EBCO premium make. The Full Height Storage handles are Satin SS finish of 160mm pitch. The Full Height Storage has a multipurpose lock of EBCO make. Auto closing hinges are provided to front shutter in 3 nos. on each side .All hinges considered are Hettich make. Necessary good quality hardwares have been considered as required. (Size:- 1200X450X1800 )

Conference Table @ 6100 (L) X 2250(W) X 750 (HT) Providing & Fixing of Conference Table round curve in shape . The total outer length of table including curve will be 13.49mtr, depth of each table is 0.75mtr .There will be a gap of 5.35X0.75mtr between two table. Conference Table made up of 18+18mm Thick Medium Density Fiber board with both side decorative laminate 1mm thick of approved quality top with PVC Membrane finish and waterfall edge profile. Aluminium Anodizied finish beeding of 4mm thick is running all over the table top edge. Gable ends is Aerofoiled Shape with front edges in PVC Membrane finish and rest in Medium Density Fiber board with both side decorative laminate 1mm thick of approved quality with battom structure. Gable ends should be hollow from inside for the provision of passing electrical and Data wiring. , MODESTY PANEL:- to be made of 18 mm thick Medium Density Fiber board with both side decorative laminate 1mm thick of approved quality with PVC edge bandAccess Flap:- For Wire manager 2 Nos. and etc.complete

Providing and fixing in position Low Height Storage having top made up of 25mm thick Medium Density Fiber board with both side decorative laminate 1mm thick of approved quality with PVC edge banding and other structure made up of 18mm & 9mm thick Medium Density Fiber board with both side decorative laminate 1mm thick of approved quality top with PVC edge banding including all fixtures and fasteners, etc complete as per aproved shade and colour. Size:- 900(W) X 450(D) X 2100(H)

Providing and fixing in position Cafeteria Table having top made up of 25 mm thick Medium Density Fiber board with both side decorative laminate 1mm thick of approved quality PVC foiled and under structure made of M.S. Frame of pipe 50x 50 x1.6 & 40x40x1.6 duly powder coated, including all fixtures and fastners, etc complete as per approved shade and colour. Size:- 1200 (W)X 900 (D) X 750 (H)

Providing and fixing in position Cafeteria Chair having structure made up of Re - Engineered PP Compound, Its Specially Designed for high impact and vertical Load as per approved shade and colour

Providing and fixing in position Visitor Chair having 25mm Dia Pipe frame leg Duly powder coated base, P.P. Fixed Arms and Seat and back cushioned with PU foam 32D non filler and cotton cloth upholstery, including all fixtures and fasteners, etc complete as per aproved shade and colour.

SProviding and fixing in position Mid Back Chair having Single Lock Synchrotilt mechanism,Nylon base, Nylon adjustable Arms PU pad and Fabric + Mesh upholstery, incluiding all fixtures and fasteners, etc complete as per aproved shade and colour.Providing & Arrangemnt of Mid Back, ECO CTS Mechanism , Fixed Armrest , Gaslift for Seat height adjustment, Standard 5-prong P/Nylon Base with Fabric Upholstery including all fixtures and fasteners, etc complete as per approved shade and colour.

Providing & Arrangement of High Back Chair - TILT ECHANISM WITH MULTILOCKING, HIGH DENSITY CUSHION ON SEAT COMPOSITE LEATHER WITH METALLIC SILVER FINISH BASE AND ARMS WITH P.U.CASTORS GASLIFT FOR HEIGHT ADJUSTMENT. Seat & Back Assembly : The seat and back shall be made of PU foam of density 45 ± 2 Kg/m3 upholstered with changeable fabric upholstery covers (as per requirement). Back Size: 480 mm. (W) X 550 mm (H) Approx. Seat Size: 480 mm (W) X 550 mm. (D) Approx. b. Base : Five prong made of black color reinforced PU plastic with Nylon wheels and pneumatic up & down with one point locking mechanism. c. Handle armrest : The armrest shall be gas-assisted injection molded from black polypropylene. d. Revolving & tilt : Chair should have a full 360 o revolving mechanism with 17 deg. maximum tilt only and tilt tension adjustment facility e. Height of chair : Maximum and minimum height is approx. is 930mm and 830 mm respectively f. Powder coating : Other visible metal parts and seat base support metal parts should be powder coated with dry film thickness more than 50 microns, Salt Spray test to withstand more than 1000 hours, Pencil scratch hardness more than 2H, Adhesion as per DIN 53152 Standards. The powder coating shall be of good quality (7 process) to ensure good adhesion of life of the coating g. Colour of seat upholster : The colour of seat fabric are mentioned in the purchase order h. Fabric : Composite leather with silver finish shall have quality of user friendly for maintain cleanliness by simple vacuuming

Providing and fixing in position High Back Chair with Head rest having Multilock Synchrotilt mechanism, Diecast alluminium base, chrome adjustable Arms PU pad and Fabric + Mesh upholstery, incluiding all fixtures and fasteners, etc complete as per aproved shade and colour. Providing & Arrangemnt of High Back, Synchronized Mechanism with Multiple Locking, Adjustable Armrest, Gaslift for Seat height adjustment, Standard 5-prong P/Nylon Base with Leatherite Upholstery and etc.complete

Public Seating Chair. - 3 Seater Providing and Fixing 3 seater Public seating chair made of complete metal with Legs in Crome finish and seates in silver powder coating finish. Seat width: Each Chair is 52 cms. Seat Bent Line: 90cm Colour: Silver +Black with Chrome Arm Length: 37cm, Width: 31cm, Hight: 4cm. Leg Length: 54cm, Height: 22cm without SS base Height. Beam: 1.7mm Thickness with Durable Screw Tube. Total Out to Out Width: 180 cms, Height: 80 cms, Depth: 64 cms. Weight: 30-35 Kgs. or Depend on your Choice, Perforated Powder Coated Metal Chairs. Chair-seat : High quality cold rolled sheet is perforated, pressed and welded to form the shape. The surface is then cleaned with acid to remove rust and electrostatically coated with epoxy power and then cured under heat to allow it to form a “skin.” Thickness- 1.2 mm Decorative Edge : High quality metal is bent to from the shape. The surface is then polished and chrome plated. Arm / Leg : High quality mild steel sheet is pressed and welded to form the shape. The surface is then polished and chrome plated. Thickness – 1.2mm Cross bar : High quality cold rolled sheet is pressed and welded to form the shape and the surface is then cleaned with acid to remove rust and powder coated. Thickness – 2mm Customization : Seat : Choice of single seater to four seater. Color : Choice of colors ; Chrome, ilver Grey, Blue, Cherry and black. Dimensions :Width : 690 mm Height : 790mmLength : 610mm per seat approx.

Laboratory Stool: Providing and supplying Top S.S with higer grade., Finishing chrome plating, Colur: off white, Brand S. S. including all fixtures and fasteners, etc complete. ( Size: 19 x 19 x 22) ”

Wooden stool: Providing and supplying Wooden stool height 3 ft and 1.1ft Dia , including all fixtures and fasteners, etc complete as per approved shade and colour. including all fixtures and fasteners’ etc. complete.