Maharashtra Animal And Fishery Sciences University Tender

Credestal @ 1200Lx450Lx650HT Providing & Fixing of LOW HEIGHT CREDESTAL @ 1200L X 450D X 650H :- To be made out of Laminate 1 mm thick Finish ( 2 Openable Shutter & 3 Drawer Pedestal in between )Drawers as per drawing made in 18 mm Medium Density Fiber board and the drawer channel ,lock ,S.S. Handle of approved like Hettich /Hafle/ Godrej make and propertly fixed in position etc complete as per drawing.

Providing & Arrangement of High Back Chair - TILT ECHANISM WITH MULTILOCKING, HIGH DENSITY CUSHION ON SEAT COMPOSITE LEATHER WITH METALLIC SILVER FINISH BASE AND ARMS WITH P.U.CASTORS GASLIFT FOR HEIGHT ADJUSTMENT. Seat & Back Assembly : The seat and back shall be made of PU foam of density 45 ± 2 Kg/m3 upholstered with changeable fabric upholstery covers (as per requirement). Back Size: 480 mm. (W) X 550 mm (H) Approx. Seat Size: 480 mm (W) X 550 mm. (D) Approx. b. Base : Five prong made of black color reinforced PU plastic with Nylon wheels and pneumatic up & down with one point locking mechanism. c. Handle armrest : The armrest shall be gas-assisted injection molded from black polypropylene. d. Revolving & tilt : Chair should have a full 360o revolving mechanism with 17 deg. maximum tilt only and tilt tension adjustment facility e. Height of chair : Maximum and minimum height is approx. is 930mm and 830 mm respectively f. Powder coating : Other visible metal parts and seat base support metal parts should be powder coated with dry film thickness more than 50 microns, Salt Spray test to withstand more than 1000 hours, Pencil scratch hardness more than 2H, Adhesion as per DIN 53152 Standards. The powder coating shall be of good quality (7 process) to ensure good adhesion of life of the coating g. Colour of seat upholster : The colour of seat fabric are mentioned in the purchase order h. Fabric : Composite leather with silver finish shall have quality of user friendly for maintain cleanliness by simple vacuuming

Providing & Arrangement of Mid Back, Normal Syncro Mechanism , Fixed Armrest , Gas lift for Seat height adjustment, Standard 5-prong/Nylon Base with Leather Upholstery Seat & Back Assembly : The seat and back shall be made of PU foam of density 45 ± 2 Kg/m3 upholstered with changeable fabric upholstery covers (as per requirement). Back Size: 480 mm. (W) X 550 mm (H) Approx. Seat Size: 480 mm (W) X 550 mm. (D) Approx. b. Base : Five prong made of black color reinforced PU plastic with Nylon wheels and pneumatic up & down with one point locking mechanism. c. Handle armrest : The armrest shall be gas-assisted injection molded from black polypropylene. d. Revolving & tilt : Chair should have a full 360o revolving mechanism with 17 deg. maximum tilt only and tilt tension adjustment facility e. Height of chair : Maximum and minimum height is approx. is 930mm and 830 mm respectively f. Powder coating : Other visible metal parts and seat base support metal parts should be powder coated with dry film thickness more than 50 microns, Salt Spray test to withstand more than 1000 hours, Pencil scratch hardness more than 2H, Adhesion as per DIN 53152 Standards. The powder coating shall be of good quality (7 process) to ensure good adhesion of life of the coating g. Colour of seat upholster : The color of seat fabric are mentioned in the purchase order h. Fabric : Composite leather with silver finish shall have quality of user friendly for maintain cleanliness by simple vacuuming

Public Seating Chair. - 3 Seater Providing and Fixing 3 seater Public seating chair made of complete metal with Legs in Crome finish and seates in silver powder coating finish. Seat width: Each Chair is 52 cms. Seat Bent Line: 90cm Colour: Silver+Black with Chrome Arm Length: 37cm, Width: 31cm, Hight: 4cm. Leg Length: 54cm, Height: 22cm without SS base Height. Beam: 1.7mm Thickness with Durable Screw Tube. Total Out to Out Width: 180 cms, Height: 80 cms, Depth: 64 cms. Weight: 30-35 Kgs. or Depend on your Choice, Perforated Powder Coated Metal Chairs. Chair-seat : High quality cold rolled sheet is perforated, pressed and welded to form the shape. The surface is then cleaned with acid to remove rust and electrostatically coated with epoxy power and then cured under heat to allow it to form a “skin.” Thickness- 1.2 mm Decorative Edge : High quality metal is bent to from the shape. The surface is then polished and chrome plated. Arm / Leg : High quality mild steel sheet is pressed and welded to form the shape. The surface is then polished and chrome plated. Thickness – 1.2mm Cross bar : High quality cold rolled sheet is pressed and welded to form the shape and the surface is then cleaned with acid to remove rust and powder coated. Thickness – 2mm Customization : Seat : Choice of single seater to four seater. Color : Choice of colors ; Chrome, ilver Grey, Blue, Cherry and black. Dimensions :Width : 690 mm Height : 790mmLength : 610mm per seat approx.

Single Bed @ 2025 LX 1000 DX 650H Providing and fixing Single Bed of Size 2025 Lx1000 Dx650 H with mattress of approved make such as Sleepwell /Kurlon /Durofix of thickness 100 mm with composite fome having density 40 thickness 80 mm and soft foam of density 32 and wraped in culting cloth and pillow with cover and bed sheet. Under structure: The legs are made of Square tube of size 25 x 25mm made out100 mm made up of MS with a thickness of 2.00 mm. The legs should have corner brackets welded to it at two levels. The corner brackets are made of 2mm thick CRCA having a L shaped structure to join the side panels and headboard to the leg. Three nos. of Horizontal stiffeners are provided at equal intervals. The stiffeners are made of Square tube of size 25 x 25mm made out of M.Steel with a thickness of 2.00mm. The middle Horizontal Stiffener has a leg attached to it to transfer the load to the ground and add to the strength and stability of the complete structure. This leg is also made of Square tube of size 25 x 25mm made out of MS with a thickness of 2.00 mm. All Metal components to undergo 7 tank treatment process and should be powder coated to the thickness of minimum 50 Microns DFT.edge Banding. The overall width of the side panel is 150mm. The side panels have 18mm thick Medium Density Fiberboard Baton running for required length to add rigidity to the structure. Head Board :- The head board is made up of 18mm thick Medium Density Fiber board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The head board size to be considered as 1000 x 650mm. and etc .complete Foot Board :- The foot board is made up of 18mm thick Medium Density Fiber board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The head board size to be considered as 1000 x 450mm. Bed Base: - The Bed Base is made up of 12mm thick Medium Density Fiber board with both side White laminate. and etc .complete Side Panel: The side panels are made up of 18mm thick Medium Density Fiber board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC

Sofa Set 3+1+1 Providing & fixing Sofa Set 3+1+1 Brown and Cream leather DIMENSION Length: 182.5 (cms) Breadth (cms): 100 (cms)Height (cms): 100 (cms) Weight (Kilograms): 66 (Kilogram) Seating Capacity: Five Seat The base and Frame of sofa made from 18 mm plywood and the coushioning of 40 density foam of thickness 75mm and soft foam of 25mm on it for seat and for back 50 mm 32 density foam and 25mm soft foam with hand rest and seating back Pillows and then finishing with brown and cream leather should be placed with proper adhesives etc complete

Tea Table - 900mm X 750mm X 450mm for m.s. ante chamber Providing And Fixing Of Tea Table 900mm X 750mm X 450mm With 12mm Thick Colour Eitched Tempered Glass With Bevelled Drawing Made Out Of 18mm Thick Waterproofing Ply. The Outer Laces To Be Finished With High Quality 4 Mm Thick Veneer with melamine polish or 1.0mm Thick Fore Mica etc. complete

Conference Table @ 2400 x 1200 x 750 mm Ht. Providing & Fixing of Main Table @ 2400Lx1200 Dx750HT - made up of 18+18mm Thick Medium Density Fiber board top with Laminate 1 mm thick finish and waterfall edge profile. AluminiumAnodizied finishbeeding of 4mm thich is running all over the table top edge. Gable ends is Aerofoiled Shape with front edges in Laminate finish and rest in Laminated Medium Density Fiber board with batton structure. Gable ends should be hollow from inside for the provision of passing electrical and Data wiring. , MODESTY PANEL:- to be made of 18 mm thick Laminated Medium Density Fiber board with PVC edge band Access Flap:- For Wire manager 1 Nos. and etc.complete .

Providing and Fixing Vertical Blinds of approved Make and shade of 100mm regular fabric with powder coated aluminium channel with telting PVC chain & bottom weight plate with all necessary fixtures and fitting etc. complete. (Sample to be final by Engineer In-charge prior execution of work)

Full Height Steel Storage @ 900Lx450Dx2000HT Providing and fixing Openable Steel Storage of 900Lx450Dx2000 ht., with 4 adjustable shelves, Complete body & shutter made in 0.8 mm thick & Top in 2 mm thick CRCA, 4 Shutter to be mounted with the help of sot closing cup hinges, approved like Hettich /Hafle/ Godrej make etc and 4 adjustable levelers, enitre With rod type 2 way lock of like Hettich /Hafle make etc, door External handle, 50 mm skirting panel, Knock down design.etc complete.

Providing & Arrangement of Mid Back, ECO S - type chair having chromium plated base S shape with heavy duty metal tube of thickness 10 mm x 25 mm the chair seating The seat and back shall be made of PU foam of density 45 ± 2 Kg/m3 upholstered with changeable fabric upholstery covers (as per requirement). Back Size: 480 mm. (W) X 550 mm (H) Approx. Seat Size: 480 mm (W) X 550 mm. (D) Approx. The armrest shall be gas-assisted injection moulded from black polypropylene. Colour of seat upholster : The colour of seat fabric are mentioned in the purchase order h. Fabric : Composite leather with silver finish shall have quality of user friendly for maintain cleanliness by simple vacuuming and etc complete

Free Standing Table @ 1200 Lx 600 Dx750 HT Providing and fixing Table of Size 1200 x 600 x 750 mm. Top: made from 25 mm Laminated Medium Density Fiber board. All edges are covered by 2 mm. Thk. PVC edge bands glued by hot melt glue applied by auto edge banding machine. Legs : C Shape made from CRCA Sheet with Powder Coat finish. Modesty panel : Made from 18mm both side Laminated Medium Density Fiber board.All edges are covered by 0.8mm PVC edge bands glued by hot melt glue applied by auto edge banding machine. KEYBOARD TRAY ( WITHOUT MOUSE TRAY ) :- Metal Powder Coated - Black Color, CPU TROLLEY :- Metal Powder Coated - Black Color, 3 DRAWER PEDESTAL UNIT having overall size 392L x 450D x 680Ht. mm. with central lock and key. Drawers and body are complete metal with powder coat finish, facia in 18 mm Laminated Medium Density Fiber board and etc complete,