Maharashtra Airport Development Company Limited Tender
... More
Search from over 12139+ business opportunities that have been announced from the biggest Mahatenders, e tender Maharashtra, Maharashtra government tenders, and the Online Tender Notices posted on Maharashtra e tenders till date. Find opportunities that have come in from the multiple corporations, Maharashtra government departments, State PSUs, and Private companies from the state.
Maharashtra Airport Development Company Limited - MADC Tender
Civil And Construction
Building Construction
Eprocure
Opening Date9 Feb 2024
Closing Date27 Feb 2024
Tender Amount₹ 50,07,92,942
Costs
EMD
0Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MADC_1001535_1Bid Award Id
ViewTender No
MADC/Shirdi Airport/2024/Cargo/Tender Authority
Maharashtra Airport Development Company Limited ViewPurchaser Address
-Website
http://mahatenders.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Excavation for foundation in Soft rock and old cement or lime masonry foundations including removing the excavated material with in the site premises, as directed by engineer in charge ,beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth /murum, ramming, watering including shoring and strutting etc. complete (lift upto 1.5m) By Mechanical Means
7540
-
-
... More
Excavation for foundation in Soft rock and old cement or lime masonry foundations including removing the excavated material with in the site premises, as directed by engineer in charge , beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth/murum, ramming ,watering including shoring and strutting etc. complete. (Lift from 1.5m To 3.0 m.) By Mechanical Means
1810
-
-
... More
Excavation for foundation in Hard rock by chiselling, wedging, line drilling, etc. including trimming and levelling the bed, removing the excavated material with in the site premises, as directed by engineer in charge , beyond the building area stacking as directed, dewatering and back filling with available earth/ murum watering, ramming etc. complete. (Lift upto 1.5 m). By Mechanical Means
917
-
-
... More
Excavation for foundation in Hard-rock by controlled blasting including trimming and leveling the bed by chiselling where necessary and removing the excavated material and stacking it in measurable heaps within a distance of 50 metres. from the building area including dewatering and back filling with available earth soil /murum watering, ramming etc. complete. (Lift upto 1.5m) By Mechanical Means
258
-
-
... More
Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating the top surface of plinth filling at the rate of 5 litres of emulsion concentrate at 1.0 percent of clorophyrifos per square metre of surface area covering ten years guarantee on bond paper.
2057
-
-
... More
Removing grass, gazer grass and disposing off out of building premises including making clean the ground by shovel and phavaras etc. complete.
14424
-
-
... More
Filling in plinth and floors with approved excavated material in 15cm. to 20cm. layers including watering and compacting etc. complete.
4376
-
-
... More
Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete.
7261
-
-
... More
Providing and supplying heavy duty chemical epoxy adhesive with pre-defined ratio (3:1) ETA, ICC, CSTB, COLA, BZS Shock approved, Seismic C1/C2 approved to use in cracked/un-cracked concrete, tested for service temperature of -40deg C to +70deg C and LEED certified injection adhesive for rebar fixing in wet/dry conditions for diameter up to 40mm. The system should be made of two components, first consisting of resin and hardener in a soft foil pack. The chemical should have service life of more than 75 years and is to be tested for water tightness. Drilling hole with double flute type drill bits/hollow drill bits to the required depth by rotary hammer drill, cleaning with brush and jet of clean air, filling resin and hardener using serrated nozzle to eliminate mixing error with standard battery dispenser along with piston plug and extension hose to ensure no air bubbles in the hole and then fixing the re-bar, conducting occasional site inspection, executing work by trained personnel and occasional supervision from the manufacturer’s representative in India. The system should be used for anchoring in natural stone as per manufacturer recommendation with proper bond strength to be mentioned. To determine installation depth of rebar in rock/natural stone surface, Pull out tests at site shall be conducted as per manufacturer guidelines and installation depth shall be determined based on consultant’s recommendation on free & fixed length. The installation and the setting instructions should be strictly followed as per the manufacturers recommendations and as directed by Engineer in charge.
2818
-
-
... More
(SH: - 2.0 - CONCRETE WORK)
-
-
-
... More
Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic microprocessor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)
789
-
-
... More
Providing and laying damp proof course 50 mm thick in M20 cement concrete layer and bitumen / using cement with waterproofing compound curing, formwork etc. complete.
189
-
-
... More
Providing and applying Bitumen VG30/VG40 layer at 2 kg. per square meter over the terrace, structural slab including cleaning the surface for waterproofing as directed complete
189
-
-
... More
(SH: - 3.0 - R.C.C. WORK)
-
-
-
... More
Providing and laying Cast in situ/Ready Mix Cement concrete M-30 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. columns as per detailed designs and drawing or as directed including steel centering formwork, cover blocks laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete. (excluding reinforcement and structural steel). with fully automatic microprocessor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)
2059
-
-
... More
Providing and laying Cast in situ/Ready Mix Cement concrete M-30 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (excluding reinforcement and structural steel) with fully automatic microprocessor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)
777
-
-
... More
Providing and laying Cast in situ/Ready Mix Cement concrete M-30 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork,cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel) with fully automatic microprocessor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)
663
-
-
... More
Providing and laying Cast in situ/Ready Mix Cement concrete M-30 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(excluding reinforcement and structural steel) with fully automatic microprocessor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)
445
-
-
... More
Providing and laying Cast in situ/Ready Mix Cement concrete M-25 of trap/ granite / quartzite/ gneiss metal for R.C.C. waist slabs and steps of staircase as per detailed designs and drawings including steel centering, ply wood/steel formwork, steel props laying/pumping, compaction finishing uneven and honey combed surface with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(excluding reinforcement and structural steel) with fully automatic microprocessor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)
16
-
-
... More
Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams, columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.
550
-
-
... More
Providing and fixing during laying in RCC Slab rectangular 2 mm thick M.S. sheet fan hook box of size 180x100 mm with required depth with holes or notches as required, bottom and top sides of 1.6 mm M.S. sheet fixed with 3.5 mm dia. round headed screws together with 12 mm dia. M.S. bar bent to shape with hooked ends for fan hook and painting to exposed surface
28
-
-
... More
Providing ,hoisting and fixing upto plinth level precast cement concrete string or lacing courses, copings, bed plates, anchor blocks, plain window sills, shelves, louvers, steps, stair cases, slabs,brackets etc. including hoisting and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand conforming to IS383), cost of required centering, shuttering and finishing smooth with 6mm thick cement plaster 1:3 (1 Cement : 3 fine sand) on exposed surfaces complete as per direction of Engineer-in-charge.but excluding the cost of reinforcement with design mix cement concrete of M-25 grade conforming to IS 456 or IS 10262.
10
-
-
... More
(SH: - 4.0 - MASONRY WORK)
-
-
-
... More
Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete.
196
-
-
... More
Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of 2 bars of 6 mm diameter / 2 hoop iron strips 25 mm X 1.6 mm placed at every third course, properly bent and bonded at ends scaffolding, racking out joints and watering etc. complete.
330
-
-
... More
Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete
1427
-
-
... More
(SH: - 5.0 - STEEL WORK)
-
-
-
... More
Providing structural steel work in trusses, other similar trussed purlins and members with all bracing, gusset plates etc. as per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting fixing in position, Making riveted/ bolted/ welded connection and one coat of anticorrosive paint and over it 2 coats of oil painting approved quality and shade etc. complete.
131.47
-
-
... More
Providing and fixing mild steel grill work for windows, ventilators etc. 20 kg/sqm as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete.Window grill W
118
-
-
... More
Providing structral steel work in hollow sections of various thicknes and sizes in square.rectangular and round shape from 25mm to 450mm sections as per IS 4923 YST 210 grade produced from iron core and blastr furnace route etc as per detailed design and drawing or as directed cutting, fabricating, hoisting, erecting, fixing in position, making riveted/bolted/ welded connections and painting complete.
16.78
-
-
... More
Providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc. including welding grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts, etc. of the required size on the top of the floor of the side of waiste slab with suitable arrangement as per approval of engineer in charge (for payment purpose, only the weight of the stainless steel members shall be considered excluding fixing accessories such as nut bolts, fasteners etc.). 50mm dia. pipe, 1.5mm thickness and weight 1.92 kg / r. metre
2542
-
-
... More
Providing and fixing concentina coil fencing with punchded tape concentina coil 600mm dia 10m openable length (total length 90m), having 50 rounds per 6m length ,upto 3m height of wall with existing angle iron Y shaped place 2.4m or 3m apart with and with 9 horizontal RBT reinforced ,stud tied with GI staples and GI clips to retain horizontal ,including necessary bolt or GI barbed wire tied to angle iron,all comple as per direction of Engineer in charrge with reinforced barbed tape,(RBT)/spring core(2.5mm thick) wire of tensile strength of 165 kg/sqmm with tape,(0.52mm thick) and weight 43.478gm/metre (cost of Ms angle CC block shall be paid seperately)
3818
-
-
... More
Providing and fixing Ductile iron manhole covers /storm water graitng and grating with frame of various size weight and types and load bearing capacity as per EN-124 equivalent NECO with prior approval of concerned superintending Engineer.
858
-
-
... More
(SH: - 6.0 - FINISHING WORK)
-
-
-
... More
Providing internal cement plaster 6 mm thick in a single coat using Ready to use wall plaster in cement mortar 1:3 to concrete surface in all positions including scaffolding and curing. Providing groove at joint of B.B.Masonry and concrete members complete. With Prior Approval of Concerned S.E.
2258
-
-
... More
Providing internal cement plaster 12 mm thick in a single coat using Ready to use wall plaster to concrete or brick surface in all positions including scaffolding and curing complete. Providing groove at joint of B.B. Masonry and concrete members complete. b) cement ratio 1:4 With Prior Approval of Concerned S.E.
21444
-
-
... More
Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete.
24827
-
-
... More
Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete.
1515
-
-
... More
Providing and applying plastic emulsion paint of approved quality, colour and shade to new surface in three coats including scaffolding, preparing the surface. (excluding primer coat) etc. complete.
15152
-
-
... More
Providing and applying interior wall finish luster of approved make on internal wall surface as detailed below scarpping the surface by emery paoer and wipe clean wall primer with brush with meneral turpentine with brush 80to 10% and oil 10% to 15 % with roller and allowing to dry for a period of 6 to 8 hours.Wall putty to with appropraite proportion of water to allowing to dry for a period of 4 to 6 hours .Scrapping witjh emery paper of 180 and wipe clean.Applying wall primer with brush with menral turpentine 80 to 10% and oil 10% to 15% with roller scrapping emery paper 320 and wipe clean,interior wall finish luster 1st coat with brush/rubber/spray with mineral turpentine 7% to 9% with brush and oil with roller 19 to 21% after 8 hours of activity .Applying 2 ns coat of wall finish luster with mineral turpentine 7 to % with brush and oil with roller 19 to 21% after allowing dry for the period of 6 to 8 hours activity.
9380
-
-
... More
(SH: - 7.0 - ROOFING WORK)
-
-
-
... More
Supply and fixing of SELF SUPPORTED” SECRET FIX STANDING ROOFING SYSTEM IN 0.9mm THICK AA 3004 ALUMINIUM ALLOY. The general roofconstruction shall comprise from bottom to top: (1) First Layer - Trapezoidal Galvalume 0.50mm thick profile sheet of 1050 mm width effective cover width and 28-35 mm height ribs with pan at 200-250 mm centre-to-centre. The feed material is manufactured out of nominal 0.50 mm Total Coated Thickness (TCT), Hi- strength steel with min. 550 MPa yield strength. Metallic hot dip coated with Aluminium-Zinc alloy (55% Aluminium, 45% Zinc) as per AS 1397 - AZ150 (Min. 150 gms/sq.mt total on both sides) Fixed to the purlins with self-drilling screws SS 304 at 500mm spacing with all required system accessories such as Aluminium clips, flashings, eaves, gables, etc., as per shop drawings, specifications and as directed by the Engineerin-Charge. (2) Second Layer – Aluminium Halters with thermal barrier pads to be fixed to the sub purlins with SS 304 screws only. (3) Third Layer - One layer of Rockwool insulation of 100mm thickness each minimum 60 kg/m³ density with thermal conductivity of K=0.038 W/mk at 20 degrees Celsius when tested to ASTM C518. (4) Fourth Layer - Vapour Control Layer shall be a single layer of double-sided aluminium foil having thickness of 200 microns (5) Fifth Layer - Top layer – Kingspan KingZip SF 65/400 Aluminium Straight profile sheeting manufactured from aluminium self-supported standing seam roof system from aluminium alloy AA 3004 H44 (AlMn1Mg1) as specified in BS EN 1396: 2007 material thickness of 0.9mm with PVDF2 finish (standard colours) on the exposed surface. The profiled roof panel should have 3Nos of Mini ribs for extra strength Accessories, Fasteners. The material properties shall be as follows: Ultimate tensile strength: minimum 200 N/mm2, 0.2% Proof Stress: min 185 N/mm2, Modulus of elasticity: 70,000 N/mm2. Sheets are to be laid to meet the requirements of the building geometry and fixed on Aluminium Halters. Halters to be fixed to the purlins with SS 304 screws. The roofing system provider shall be certified with a British Board of Agreement and should have all Factory Mutual (FM-4471),UL Certification (UL-90)& Thomas Bell Wright International Testing certificate. The Roofing system provider should have at least three new roll forming machines less than 5 years old. New roll former will ensure that roll formed panels shall be of consistent quality and extra roll former will avoid any delay in mobilizing roll former at appropriate time . All installation is to be carried out by approved trained roofing installer. Appropriate accessories for Verge, Eave Ridge shall be used to ensure the weather & water tightness at these point.
760
-
-
... More
Providing and fixing ridge/ valley capping/flashing in required width (minimum 500 mm) with plain galvalume colour coated sheet made out of 0.50mm TCT, minimum 550 MPa cold rolled steel with hot dip metallic coating of Aluminium Zinc alloy (Galvalume) 150 gms/sqm total of both sides, AZ 150 as per ASTM A 792 or AS1397, with polyester colour coating same as of roofing sheet including cost and conveyance of all materials, scaffolding, lead, lift, labour charges, etc. complete at all levels as directed by Engineer-in-Charge.
34
-
-
... More
(SH: - 8.0 - FLOORING WORKS)
-
-
-
... More
Providing and laying 150mm thick Vaccum dewatered reinforced concrete flooring in M-30 design mix with 20mm and down graded coarse aggregate in required level,machine mixing with plasticizer and 12 mm cut length secondary reinforcement of approved quality, Elkem micro silica with a dossage of 3.5 kg per bag of cement ,fixing the reinforcement bars as per design, fixing the m.s. channel form work in perfect level, laying the concrete, compacting with surface vibrator, maintaining the water/cement ratio with controlled Vaccum dewatering system, broadcasting/spreading floor hardener granules of approved make as per manufactures specification . Broad casting/ spreading shall be done evenly and in two phases and directions as directed by the manufacturer, power trowelling, finishing the surface smooth icluding cutting the grooves 6mm wide x 40mm deep with groove cutting machine, filling the grooves with fine sand 20mm at bottom and top portion of 20mm with approved quality neoprene mastic including watering, curing, cleaning etc.complete as directed by Engineer-in-Charge(Steel reinforcement steel shall be measured and paid under respective item).Rate shall include cost and conveyance of all materials,labour, providing & laying,500 micron thick polythene sheet on the existing PCC etc. complete as directed by the Engineer-in-Charge.All works covered by this specification shall be carried by an experienced agency having sufficient experience in Vaccum dewatering concrete system.Only skilled and experienced persons shall be employed for purpose.
1419
-
-
... More
Providing and laying vitrified matt fininsh tiles having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement morar including neat cement float, filling joints, curing and cleaning etc. complete.
114
-
-
... More
Providing and laying vitrified mirror / glossy finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete
464
-
-
... More
Providing and laying cement concrete flooring 50mm thick with M20 cement concrete laid to proper level and slope in alternate bays including compaction, filling joints, marking lines to give the appearance of tiles of 30cm x 30cm or other size laid diagonally/ square etc. finishing smooth (with extra cement) in any colour as directed and curing etc. complete. With Crushed Sand.
492
-
-
... More
Providing and laying in position flooring of telephone black / Amba White / Cat bary brown / Ruby red / Ocean Brown granite stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete.
243
-
-
... More
Providing and laying light weight (Density 12KN/m3)cement concrete of approved design mix properly mixed and consolidated with hand rammers, adding admixtures in reccomended proportion including cost and conveyance of all materials, labour, curing, lead lift , etc. complete for sunken floor filling as directed by Engineer-in-Charge at all levels.
18
-
-
... More
Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
26
-
-
... More
Providing and applying 2 mm thick epoxy flooring by prepare the surface by eitching, grinding, wire brushing to remove all dust, lose particles, dry slurry of any etc and apply two part component epoxy primer of approved make and allow it become tack free followed by providing and laying high build three part component epoxy floor topping system Fosroc’s Niotoflor SL 2000 or equivalent in 2 mm thickness including all materials, labour, leading, laying,coving, capping and skirting as per manufacture’s recommendation etc complete as directed by the Engineer-in-Charge
382
-
-
... More
(SH: - 9.0 - CLADDING & PARTITION WORK)
-
-
-
... More
Supply,fixing and installation of 4mm thick Aluminium Composite Panel(ACP) of approved colour for external cladding incombination of solid and metallic colours, including all necessary Frame work, support and complete weather sealing as per architectural drawing. The Aluminium Composite Panel (ACP) should be made out of thermoplastic core of low-density polyethylene LDPE (100%virginmix), sandwiched between two aluminium sheets of ALLOY GRADE-5000 series, each not less than 0.50mm thick, total thickness of aluminium composite panels not tobe less than 4mm,the exposed surface there of shall have Stovel acquered finishing coat not less than (26+-2) micron (containing minimum 70% kynar 500based PVDF) of colour and shade asper architectural design. The inside surface (facing the building exterior surface) shall have polyster based powder coating not less than 25 Micron with protective peel-off foil on the exterior face (peel off film will innocase leave any adhesive markover the composite panel surface after itispeeled off). The supporting frame work shall be made out of 50mm X 25mm X 3mmthick Aluminium section to be spaced horizontally and vertically for fixing of panel of size 900mmX1200mm and fixed tothe building structure asper design through 50mmX50mmX5mm MS angle clamps prefixed to masonry or slab, columns with Hilti make an chorfastener screws. The fixing of panel to be done with the help of VHB tapes and screws and all these aling of joints tobe done with weather sealent Silicon as directed by Engineer-in-charge. (Prior permission of S.E.is necessary before inclusion of this item in estimate)
2696
-
-
... More
Providing & Fixing in position, Acoustical Panelling made from 12mm wp Ply wood & 1.5mm laminate on, 50 x 50 mm Sal-wood frame of 600 x 600mm centre to centre having wooden supports from wall of required length, in front of 1000 Gsm synthetic wool 50 mm thick with chicken mesh on wall side, including cost of required Cut-Outs, decorative mouldings / finishing-items / paint & Scaffolding, as per Architectural & Acoustical Design & Instructions & Complete in all aspects.including all materials labour,finishing etc complete.
107
-
-
... More
Supplying and laying of standard quality GFRG panel of approved thicknesswith modular cavities purchased from GFRG panel manufacturingplant in the country, cut to required wall sizes and floor/ roof slabsizes in correct length and height, including cutting of necessary opening as per the cutting drawing prepared byarchitects /design engineers for the construction of GFRG buildingand loaded in stillages for transportation to the construction site.Cost of panel includes security deposits, hire charges of stillages &jaws, cost of transportation in trucks/ lorries without any damagesupto 300kms including all leads and lifts from GFRG manufacturingplant to construction site and unloading at site using suitable forklift/ crane. (Payment shall be made on the basis of area of one sideof panel without reduction of opening ).For transportation above 300kms, additional charges to be paid.The rate shall include the cost and conveyance of all materials,labour charges,lead,lift etc complete as directed by the Engineer in charges .
411
-
-
... More
Supply and installation of cubicles of width and depth as per Athena Lite- SS Series Cubicles- Std Sizes (W x D x H): 900 mm x 1550 mm x 2105 mm, (Height is including 100 mm gap from bottom, Door Width- 600 mm specifications/ site drawings). Cubicle height to be 2105 mm. Made from solid grade compact high pressure laminate as per IS:2046 and EN-438 manufactured under high specific pressure 5 MPa and temperature 120°C, All doors will be of single colour and made of 12 mm thick Merino HPL compact panel. The doors will have chamfered edges. Each door will be supported by 3 stainless steel made hinges affixed to the pilasters. Size of panels to be as per drawing.
HARDWARE & ACCESSORIES are H shaped (Top) head frame structure made of extruded Aluminium grade 6063 T5-50 micron epoxy powder coated for surface protection, Size to be 125x70x5T. Corner joinery section, Size to be 40x16.5x1.8T. UChannel Wall joinery section,Size to be 22x16x1.6T. Door stopper section, Size to be 21x12.5x1.6T. Spring loaded Butt Hinges made from Stainless steel grade 304. Surface finish to be matt type. Covers to be lacor coated.etc complete.
43
-
-
... More
Providing and fixing 75mm thick pre-fabricated walls of suitable heights using AEROCON sandwich panel made up of two fiber reinforced cement sheets, facing on either sides of a light concrete core.(The lightweight concrete core consists of a mixture of Portland cement, binders, siliceous and micaceous material aggregate that is suitably aerated.) The rate includes openings for doors and windows, necessary strengthening and supports using GI Floor channels, along with joints finished with appropriate joint compound and fiber tape.etc complete all as per direction of Engineer in charge
795
-
-
... More
(SH: - 10.0 - JOINERY WORKS)
-
-
-
... More
Providing and fixing in position (as per I.S. 1868 / 1982) Aluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 kg/Rmt. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 kg/Rmt.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. and handle and top section 40 x 18 x 1.25 mm at weight o.417 kg/Rmt. As per detailed drawings and as directed by Engineerincharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With powder coating without box.
62
-
-
... More
Providing and fixing in position, Single shuttered aluminium extruded powder coated openable door of overall size 0.90 m x 2.40 m with aluminium door frame of powder coated section 101.60 x 44.75mm , 3.18 mm thick and shutter comprising of powder coated section having bottom and lock rail of size 150 mm x 44.5 mm x 3.00 mm thick top rails 47.62 x 44.45 mm x 3.00 mm thick , vertical style 47.62 x 44.45 mm, 3.00 mm thick and for shutter plain glass panes 5 mm thick for top panels and 12mm thick both side laminated phenol bonded particle board panels for bottom panels etc. , I.S.I. mark , heavy duty, Hydraulic floor spring of 150 kg capacity , having heavy duty concealed lock, necessary beading, glazing clips, PVC gaskets, 250mm length tower bolts, 150mm diam. pad handle, etc. as per detailed design and drawing or as directed by engineer in charge including all materials , labours, and equipment etc.Complete.
22
-
-
... More
Providing & fixing factory-made Single leaf 2 hour fire rated door as per IS 3614 Part 2 & BS 476 Part 20 & 22, tested to UL 10 C and conforming to NFPA 80 , tested at NTL /CBRI/ARAI of Plain Steel finish type with a.) Frame of size 143x58 mm and thickness of 1.6 mm thick skin pass galvanized iron sheet (Conform to IS 277 ) formed to single or double rebate profile b.) Shutter of 46 mm thickness and constructed from 1.2 mm thick skin pas galvanized iron sheet (Conform to IS 277) infill Rockwool / Mineral wool/ Honey comb craft paper c.) Vision glass of 5mm thick clear/wired glass Circular or Rectangular d.) Finish : Primed with zinc phosphate stoving primer and finished with Polyurethane aliphatic grade or epoxy paint as required of thickness 60 micron e.) Accessories : Min 8 Anchor fastener of HILTI make, min 3 SS Ball Bearing Butt Hinges, Mortise sash lock with lever handle, Mortise dead bolt , Mortise latch , Door closer and Flush bolts complete.
45
-
-
... More
Providing and fixing in posistion aluminium fixed window fully glazed of any size as per detailed drawing and as directed by enginer in charge with all necessary aluminium sections including fixtures and fastening with 5mm thick clear float glass etc complete ) powder coated
76
-
-
... More
Solid Core Flush door Single leaf
Providing and fixing factory made solid core flush door in single leaf 35 mm thick, decorative types, of exterior grade, as per detailed drawings, conforming to I.S.:2202 - 1962 (Revised) with approved face veneers on both faces with/without glazing and venetians in the positions shown on the drawings or as directed, all necessary beads, moulding and lipping, holdfasts, mat finish stainless steel fixtures fastenings , finishing with french-polish/ waxing complete. (without door frame).(Sample to be got approved from Ex.Engineer before use) Commercial Hard Wood shutter
36
-
-
... More
Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9 mm with lock plate of 3.15 mm thickness reinforced with 35 x 35 x 5 mm angle section fitted with sliding bolts and handles for both sides, deep M.S. channel section of depth and thickness not less than 65 mm and 3.15 mm respectively with hold fast arrangements, M.S. Bracket plate 300 x 300 x 3.15 mm minimum size and shape with square bar, suspension shaft of minimum 32 mm diameter, hood cover of M.S. sheet not less than 0.9 mm thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade cast iron or mild steel and one coat of red lead primer etc. complete. (I.S. 62481979) (With mechanical gear)
243
-
-
... More
Providing and fixing in position anodised extruded aluminum partitions,partly glazed and partly laminated having frame made out of extruded aluminium tubular section of size 40mm x 60mm with 12mm thick three layered flat pressed teak wood particle board bonded with BWP type exterior grade phenol formaldehyde synthetic resin confirming to IS 128231990,laminated on both side ,novateaker equivalent and 5mm thick selected quality plain /float glass panels fixed with aluminium glass clips 12mmx12mm and rubber cushioning beading to glass partition as per approved drawing as per complete
46
-
-
... More
Providing and fixing in position anodised extruded aluminum partitions,having frame made out of extruded aluminium tubular section of size 65mm x 40mm with 12mm thick three layered flat pressed teak wood particle board bonded with BWP type exterior grade phenol formaldehyde synthetic resin confirming to IS 128231990,laminated on both side ,novateaker equivalent and 5mm thick selected quality plain /float glass panels fixed with aluminium glass clips 12mmx12mm(conical) as per approved drawing as per complete
65
-
-
... More
Providing and fixing frame with /without ventilater of size as specified with country cut teak wood for doors and windows including chambering , rouding ,rebating iron hold fast of size 300x40x5mm with oil paint etc complete.
0.03
-
-
... More
Providing and fixing fully finished pre hung door of jacdoor or equivalent of size 80mm x2100mm made up of both side HP laminate jacwood standard white /teak/sapeli/straight walnut/EV wench/American walnut vertical pattern flush door with matching PVC wrapped WPC jamb with front side archtrave back side tackers.Door of 35mm thick 4 side edges PVC lipping/lock hole boring (using mortice lock ) /hinge rebate cutting 4 nos /extruded saur land core filling from Germany.Jamb with 100mm size.This reta includes cost of door with accessories like jacwood latch with lever handles without keys of SS finish,4 inch hinges of SS finish and 6 inch 202 grade SS finish tower bot etc comple etc complete all as per directions of Engineer in charge.
7
-
-
... More
Providing and fixing anodised aluminium grill ( anodised transparent or dyed to required shade according to IS : 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P brass/stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge.(Only weight of grill to be measured for payment ).
643
-
-
... More
(SH: 11-0 FALSE CEILING WORKS)
-
-
-
... More
Providing and fixing in position Gypsum board false ceiling with 12.5 mm thick Gypsum boards, screwed/fixed to the under structure of suspended G.I. Grid constructed and suspended from the main ceiling consisting of ceiling sections of size 25 x 50 mm maximum center to center distance of 600 milimetre perimeter channel and intermediate channels at maximum center to center distance 1200 milimetre galvanized grid should be fixed to reinforced cement concrete slab. The gypsum board should be fixed to galvanized iron grid with necessary screws. The boards should be taped and filled from underside to give smooth, seamless ceiling. The rate should include necessary additional ceiling sections and intermediate channels. Additional intermediate channels should be fixed to strap hangers for additional support to prevent strapping at every 1200 milimetre item to be completed in all respect including necessary sleeves for ducts finishing of joints cut outs, painting including labour, material, lifts etc. all complete.
39
-
-
... More
Providing and Fixing of GI Lay in Plain metal ceiling consisting of 600x600mm Lay in tiles of pre coated galvanized steel in 0.5 mm thickness in Global white color tile to be laid on grid systems with 15mm wide T - section flanges color white having rotary stitching on the Main Runner, 1200 mm and 600 mm Cross Tees.Providing and Fixing of GI Lay in Plain metal ceiling consisting of 600x600mm Lay in tiles of pre coated galvanized steel in 0.5 mm thickness in Global white color tile to be laid on grid systems with 15mm wide T - section flanges color white having rotary stitching on the Main Runner, 1200 mm and 600 mm Cross Tees.products approved as per GRIHA and BS 476 etc. complete.
95
-
-
... More
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with:
12.5 mm thick tapered edge gypsum moisture resistant board
50
-
-
... More
(SH: 12-0 MISCELLANEOUS WORKS)
-
-
-
... More
Providing and fixing bituminous pad 25mm thick for expansion joint in retaining wall /compound wall etc complete.
54
-
-
... More
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-Charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-Charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-Charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixedwith water proofing compound conforming to IS : 2645 and approved by Engineer-in-Charge. d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-Charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-Charge including cost and conveyance of all materials, curing, labour charges, etc. complete at all levels. With average thickness of 120 mm and minimum thickness at khurra as 65 mm. (The above work shall be carriedout by an agency having sufficient experience in water proofing application and should ensure a warranty of 10 years. Only skilled and experienced persons shall be employed for this purpose.)
1038
-
-
... More
Providing and laying concrete pipes of I.S.NP. class of 300mm diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete.
12
-
-
... More
Providing and fixing galvanised iron profile sheets/Deck sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.80 mm- total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 250 mpa steel grade, as directed by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of approved size and make, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required etc. complete as directed by Engineer In Charge.Above work shall be carried out by specialised agency having sufficient experience in executing similar work.
620
-
-
... More
Providing & Applying polymer modified, flexible cementatious negative side waterproofing coating with elastic waterproofing polymers on interior wall plaster surface in three coats @14.35 kg /10 sqm. one coat of self priming of cementatious waterproofing polymer(dilution with water in the ratio of 1:1) and two coats of cementatious waterproofing polymer (dilution with water in the ratio of 3:1 ) after scrapping and properly cleaning the surface to remove pre-existing paint film & loose particles till plaster is visible, complete in all respect as per the direction of Engineer-in-Charge.
843
-
-
... More
APRON, TAXIWAY
SH: -13.0 EARTH WORK
-
-
-
... More
Clearing and grubbing road land including uprooting rank vegetation,grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness.
34802
-
-
... More
Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts and all leads . and spreading for embankment or stacking as directed.
33037
-
-
... More
Providing earth work in embankment with approved materials obtained from departmental land upto lead of 50m. including all lifts, laying in layers of 20cm. to 30cm. thickness breaking clods, dressing to the required lines, curves, grades & section, watering and compaction with vibratory roller to achieve not less than 97 % of standard proctor density etc. complete (Material obtained from departmental Land)
6254
-
-
... More
Providing earth work in embankment with approved materials obtained from other sources including all leads , lifts, laying in layers of 20cm. to 30cm. thickness breaking clods, dressing to the required lines, curves, grades & section, watering and compaction with vibratory roller with V-Sat attachment to achieve not less than 97 % of standard proctor density etc. complete ( Material obtained from Other sources)
40472
-
-
... More
Providing, laying and spreading soil on a prepared sub grade, pulverizing, mixing the spread soil in place with rotavator with 3 per cent slaked lime with minimum content of 70 per cent of CaO, grading with motor grader and compacting with the road roller at OMC to achieve atleast 98 per cent of the max dry density to form a layer of sub base including all leads complete.
17542
-
-
... More
Extra for additional lead upto 10km over initial lead of 50m for transporting embankment fill, subgrade/ earth to site including loading, unloading by mechanical means and as per the direction of Engineer-in-Charge.
1103
-
-
... More
Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material for all leads and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means
3350
-
-
... More
Excavation for foundation in earth, soils of all types, sand,gravel and soft murum, including removing the excavated material for all leads and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5m to 3.0m) By Mechanical Means
430
-
-
... More
Excavation for foundation in Soft rock and old cement or lime masonry foundations including removing the excavated material for all leads and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth /murum, ramming, watering including shoring and strutting etc. complete (lift upto 1.5m) By Mechanical Means
178
-
-
... More
Excavation for foundation in Soft rock and old cement or lime masonry foundations including removing the excavated material for all leads and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth/murum,ramming, watering including shoring and strutting etc. complete. (Lift from 1.5m To 3.0 m.) By Mechanical Means
24
-
-
... More
Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc for all leads complete..
247
-
-
... More
Excavation for foundation in laterite rock (soft or hard) including trimming and levelling the bed for the foundation, removing the excavated material for all leads, stacking as directed, dewatering and back filling with available murum, watering, ramming etc. complete. (Lift upto 1.5 m.) By Mechanical Means
50
-
-
... More
Excavation for foundation in Hard rock by chiselling, wedging, line drilling, etc. including trimming and levelling the bed, removing the excavated material for all leads, stacking as directed, dewatering and back filling with available earth/ murum watering, ramming etc. complete. (Lift upto 1.5 m). By Mechanical Means
50
-
-
... More
SH: - 14.0 -PAVEMENT WORK
-
-
-
... More
Construction of granular sub-base by providing close graded Material,mixing in a mechanical mix plant at OMC, carriage of mixed Materialto work site, spreading in uniform layers with motor grader / Paver onprepared surface and compacting with vibratory roller to achieve thedesired density, for all leads complete as per clause 401 -- Plant Mix Method and Grading - II Material
5915
-
-
... More
Wet Mix Macadam -- Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density for all leads complete. Laying By Grader/Paver.
6413
-
-
... More
Prime coat - Providing and applying primer coat with bitumen emulsion on prepared surface of granular Base including cleaning of road surface and spraying, primer at the rate of 0.60 kg/sqm using mechanical means - for all leads complete
14478
-
-
... More
Providing and applying tack coat on the prepared surface heating by flames in Boiler and spraying bitumen set footed in bitumen boller on B.T. surface 2.5 kg/10 sqm.(VG-30 bulk bitumen rates are considered to arrive at rates) for all leads complete
29329
-
-
... More
DENSE BITUMINOUS MACADAM: Proving and laying dense bituminous macadam using crushed aggregates of Grading 1, premixed with bituminous binder of specified grade of Bitumen @ 4.50 per cent by weight of total mix and filler, transported to site with VTS , laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired density for 76-100 mm compacted thickness .USING Batch mix type hot mix plant with SCADA, Sensor Paver, Vibratory roller with Stone Dust filler for all leads complete.(VG-30 bulk bitumen rates are considered to arrive at rates)
1077
-
-
... More
BITUMINOUS CONCRETE:- Providing and laying bituminous concrete using crushed aggregates of grading 1, premixed with bituminous binder @ 5.20 per cent by weight of total mix and filler, transported to site with VTS , laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired compaction for 50 mm compacted thickness with specified grade of Bitumen,Excluding prime / tack coat. For Bitumen of specified grade -- USING Batch mix type hot mix plant with SCADA, Sensor Paver Vibratory roller with Stone Dust filler for all leads complete. (VG-30 bulk bitumen rates are considered to arrive at rates)
191
-
-
... More
Providing and Laying of hot mix Dense Asphaltic Concrete (DAC) using Crushed stone aggregate of quality , size and grading as specified and 2% cement by weight of aggregates as filler of quality as specified and Polimer Modified Bitumen (PMB 40 supplied in bulk) in proportions as per job mix formula and laid to specified levels, grade and camber as per specification, drawings and as directed by the Engineer -in-charge including compacting with 8-10 tonne, preferably vibratory road roller of adequate capacity to achieve the specified value of compaction, strength and surface accuracy for all leads complete ( PMB with typical asphalt content 135 kg / cum of total mix supplied in Bulk produced by Govt. Refineries and 2% Cement by weight of Aggregates as filler material).
621
-
-
... More
Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate ( natural sand/ VSI grade finely washed crushed sand) conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, , cement content not to be less than
150 kg/ cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant/ Weigh batch mixer, transported to site with all leads and lifts, laid with a paver with electronic sensor /by suitable means as approved by Engineer-in-charge , compacting with vibratory roller, finishing, curing and including preparation of subgrade surface if required etc. complete.
1924
-
-
... More
Providing and laying in-situ M40 Grade unreinforced plain cement concrete pavement over a prepared sub base with 43 grade cement .coarse and fine aggregate ( natural sand/ VSI grade finely washedcrushed sand) conforming to IS 383, using fine and coarse aggregates combined gradation as per Table 600-3 of MORTH Specification 2013,mixed in a batching and mixing plant/ non tilting mixer and Weighbatcher as per approved mix design, admixtures, transporting to site,spreading, laying with approved make paver,compacted and finished in a continuous operation, finishing to lines and grades as directed by Engineer-in-charge and curing by curing compound /by providingcement vata in cement Mortar 1:8 @0.6m X 0.6m centre to centre,admeasuring 80 mm at bottom and 40 mm at top with depth of75mm and maintaining the same throughout curing period by any other method approved by Engineer-in-charge for all leads complete
5334
-
-
... More
Providing and fixing in position TMT FE 500, 32 mm dia dowel bars precoated with anticorrosive epoxy paint of required Dia. 60 cms. Long and at 30.00 cm. C/C and wherever directed including handling, straightening, necessary cutting supported by TMT FE 500, chairs with
proper alignment by using properly designed assembly of Bulkheads lubricating half length with bituminous paint as directed etc.for all leads complete
8715
-
-
... More
Providing and fixing in position TMT FE 500, tie bars precoated with anticorrosive epoxy paint of 12 mm dia. 70 cms.long and at 30.00 cm. C/C and wherever directed including handling, straightening wrapping with paper of approved quality for half length, necessary cutting, handling, straightening , supported by assembly of TMT FE 500, chairs with proper alignment etc.for all leads complete
4528
-
-
... More
Cutting transverse contraction joints 3 to 4 mm wide and depth 60mm. .in concrete slab using concrete cutting machine with diamond studded saw within 48 hours of casting of bay / slab etc. complete including subsequent widening of the groove 8 to 10 mm. wide at top having depth of 15 mm. as directed by Engineer incharge.
3312
-
-
... More
Providing to contraction joints polysuphide sealent (Pouring grade) confirming to BS : 5212 - 1989 into sawed groove widened at top for sealent reservoir of specified size and shape as per detailed drawing including fixing Polyethylene foam backer rod of required diameter (appraox. 25% larger than the initial 3 mm.to 4 mm. joint) overlaid with bond breaking tape as per detailed drawing. Item includes cleaning the joints with water jet / air compressor and allowing joint to become thoroughly dry before sealent is applied and applying primer.
(A) Contraction and longitudinal joints (15 mm. deep x 8 mm.wide)
6623
-
-
... More
Providing and laying 125 micron Low Density Polyethylene (LDPE) sheet confirming to IS 3395 : 1997 below concrete pavement including all materials and labour , all leads complete.
15240
-
-
... More
SH: -15.0 -ROAD APPURTENANCES
-
-
-
... More
Painting runway/taxi track/apron marking with adequate nos of coats to give uniform finish with road marking paint of superior make as approved by the Engineer-in-charge, i/c cleaning the surface of ail dirt, scales, oil, grease and other foreign mater;al etc. and lining out complete.
New work (Two or more coats)
5686
-
-
... More
SH :-16.0 CONCRETE WORK
-
-
-
... More
Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/ granite/quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, Steel centering, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc for all leads complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)
188
-
-
... More
SH :17.0 RCC WORK
-
-
-
... More
Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering, formwork ,cover blocks, laying/pumping, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc for all leads complete With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc. All work upto plinth level.
813
-
-
... More
Providing ,hoisting and fixing upto floor five level precast cement concrete string or lacing courses, copings, bed plates, anchor blocks, plain window sills, shelves, louvers, steps, stair cases, slabs,brackets etc. including hoisting and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand), cost of required centering, shuttering and finishing smooth with 6mm thick cement plaster 1:3 (1 Cement : 3 fine sand) on exposed surfaces complete but excluding the cost of reinforcement with design mix cement concrete of M-25 grade conforming to IS 456 or IS 10262.
204
-
-
... More
Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required for all leads complete. Thermo-Mechanically Treated bars
127
-
-
... More
SH : 18.0 MASONRY / FINISHING WORK
-
-
-
... More
Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete.
171
-
-
... More
SH : 19.0 MISCELLENEOUS
-
-
-
... More
Supplying, laying, jointing and hydrostatically testing ISI marked HDPE pipes of 140mm dia 10 kg/cm2 conforming to as per IS 4984,1985 PE-100 including all fittings and specials such as tees, elbows, bends, reducers, end caps, saddles, plugs, coupling, MTA , all types of pipe supports etc. including cost of all jointing materials, bolts, nuts, rubber washers, ferrule, pipe supports, hire of tools, cost for conveyance of water for testing, etc. complete so as to withstand the internal design pressure of 10 kg/cm2 -for external works
100
-
-
... More
Supplying, laying, jointing and hydrostatically testing ISI marked HDPE pipes of 50mm dia 10 kg/cm2 conforming to as per IS 4984,1985 PE-100 including all fittings and specials such as tees, elbows, bends, reducers, end caps, saddles, plugs, coupling, MTA , all types of pipe supports etc. including cost of all jointing materials, bolts, nuts, rubber washers, ferrule, pipe supports, hire of tools, cost for conveyance of water for testing, etc. complete so as to withstand the internal design pressure of 10 kg/cm2 -for external works
200
-
-
... More
Supply and installation of Foundation Bolt set along with anchor plate and M30x850mm bolts (12 nos M30x850mm bolts and Anchor Plate with PCD of 650mm) all complete as per directions of Engineer in Charge
3
-
-
... More
Providing and fixing factory made Hydraulically pressed Mechanically vibrated and compacted precast inter locking cement concrete paving blocks 100MM thick in M-50 grade of approved size and shape for City streets and roads with high volume/ heavy traffice as specified and as per IS 15658:2006 including cost of all materials, manufacturing, curing, transportation of blocks to work site including loading, unloading and stacking as directed, laying paving blocks in position over prepared bed of natural sand / crushed sand of 50 mm thickness including necessary excavation in all stratas, spreading blindge of fine sand over the prepared bed, compacting blocks by plate vibrator
5061
-
-
... More
Footpaths and Separators -- Construction of footpath/separator by providing a 150 mm compacted granular sub base as per clause 401 and 25 mm thick cement concrete grade M15, over laid with pre-cast concrete tiles in cement mortar 1:3 including provision of all drainage arrangements but excluding kerb channel.
1103
-
-
... More
(SH : 20.0 SANITARY INSTALLATIONS)
-
-
-
... More
Providing and fixing white european type wall- hungpan of size 350mm x 355mm x 570mm concealed flush tank with floor-mounting frame installing kit and drain pipe connection set for wallhung WC with approved makes quare control plates including soil pipe, vent pipe upto the outside face of wall,100mm diaC.I. plug bend inlet pipe all fittings, cutting & making good walls, floors etc. complete.
16
-
-
... More
Providing and fixing white glazed urinal with Pressmaticauto closing valve having flow rate upto 4.0Litr/ Minute of Jaquar/ Cera/ Hindware/ Perryware or equivalent make with P.V.C. waste pipe with fitting arrangement etc. complete as directed by Engineer in charge. (Make shall conform to manufacturer's Green product and shall got approved from the Engineer In Charge.)
16
-
-
... More
Providing and fixing Oval Type Under Counter Wash Hand Basin of 420x590x195mm size with pillar cock, C.P.Angular stop cock, long thread of approved make continental including SS bottle trap of necessary pipe connection upto the outside face of the wall, having Telephonic Black/Colour Granite of 180mm thick fixed on Black Kadappa Frame work, etc. Complete as directed by Engineer in charge.
29
-
-
... More
Providing and fixing C.P. BIB cock with wall flange of approved make including necessary sockets/ union nut etc. complete as directed by Engineer in charge.
18
-
-
... More
C.P.Soap dish hooker jaquar make continental (Cat. No. AKB 35731 )
4
-
-
... More
C.P.Toilet rack 24"with lower hanger jaquar make continental (Cat. No. ACN 1181N )
20
-
-
... More
C.P.Handshower (health faucet) 1m.PVC tube with wall hook jaquar make (Cat. No. ALD 563 )
17
-
-
... More
C.P.Toilet paper holder jaquar make continental (Cat. No. AQ 7751 )
22
-
-
... More
C.P.Angular stop cock with wall flange aqua make queen's collection (quarter turn fitting) (Cat. No. QQT 7053 )
60
-
-
... More
Providing and fixing liquid soap dispenser with metallic bottle etc. complete, testing and commissioning to the satisfaction of Engineer in Charge as per direction of Engineer-in-charge at all levels.
12
-
-
... More
Providing and fixing wall mounted tissue dispenser etc. complete, testing and commissioning to the satisfaction of Engineer in Charge as per direction of Engineer in charge at all levels.
25
-
-
... More
Providing and fixing floor mounted water cooler with hot,cold and normal water provision with water purification system etc complete with all accessories of approved quality and make including cost and conveyance of all materials labour charges ,lead, lift, cutting and making good the walls ,floors,slabs etc complete as directed by the engineer in charge at all levels
1
-
-
... More
Supplying and fixing approved quality white vitreous chinaurinal division plate including cost and conveyance of all material, labour charge, lead, lift,
etc . complete as directed by the Engineer-in-Charge.
11
-
-
... More
Providing and fixing floor trap 110 mm dia (gratings exposed)with cockroach trap (multi trap), S304 grade exposed floor grating with multitrap including cost and conveyance of all materials,labour charges, sundries etc completebras directed by the directed by the Engineer in Charge at all levels
44
-
-
... More
Providing and fixing floor trap with cockroach trap (multi trap), concealed, SS304 grade floor grating with cup including cost and conveyance of all materials, labour charges,sundries etc complete as directed by the directed by the Engineer-in-Charge at all levels
44
-
-
... More
Providing and fixing Cleanout with Spigot, with SS 304 Square Frame &
Round Frame with Flat Round Cover with Rubber Seal & SS Screw including cost and conveyance of allmaterials, labourbrcharges, sundries etc complete as directed by the Engineer in charge at all levels.75mm dia
8
-
-
... More
Providing and fixing Cleanout with Spigot, with SS 304 Square Frame & RoundFrame with Flat Round Cover with Rubber Seal & SS Screw including cost and conveyance of allmaterials, labourbrcharges, sundries etc complete as directed by the Engineer in charge at all levels.110mm dia
16
-
-
... More
Providing and fixing wall mixer with overhead shower,shower arm,hand shower with wall bracket having flow rate up to 12 liters/minutes of Jaquar/Cera/Hindware /Perryware or equivalent make including all necessary pipes,fittings etc.complete as directed by Engineer In Charge.( Make shall conform to manufacturer's Green product and shall got approved from the Engineer In Charge.)
2
-
-
... More
Providing and fixing 450mm x 550mm size superior type Belgium mirror with 16mm dia. nickel plated towel rod etc. complete.
32
-
-
... More
(SH: - 21.0 -WATER SUPPLY)
-
-
-
... More
Providing and fixing on walls/ ceiling/ floor 15 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete
23
-
-
... More
Providing and fixing on walls/ceiling/floor 20mm dia. CPVC pipe with necessary fittings,remaking good the demolished portion etc.complete. Including removing existing pipeline if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.
35
-
-
... More
Providing and fixing on walls/ceiling/floor 25mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.
42
-
-
... More
Providing and fixing on walls/ceiling/floor 32mmdia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipeline if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.
43
-
-
... More
Providing and fixing on walls/ceiling/floor 40mmdia. CPVC pipe with necessary fittings, remaking good the demolished portion etc.complete. Including removing existing pipeline if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.
34
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall 40 mm nominal outer dia pipes
155
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer- in-Charge. External work50 mm nominal outer dia pipes
426
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermalstability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing thepipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solventcement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed onwall-65 mm dia pipes
24
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermalstability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing thepipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solventcement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed onwall-100 mm dia pipes
252
-
-
... More
Providing and laying intrenches 40mm dia. CPVC pipe including necessary excavation, fittings. Refilling trenches etc.complete. Including removing existing pipeline if necessary and conveying and stacking the same in PWD chowky or as directed etc.complete.
650
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.-50 mm dia Pipes
558
-
-
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end)- 65 mm dia
4
-
-
... More
Supplying and erecting 50 mm dia gun metal gate valve complete with PN16 pressure rating, as per specification no. FF-VL/GV
8
-
-
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) - 40 mm dia
3
-
-
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end)- 32 mm dia
9
-
-
... More
Supplying and erecting 25 mm dia gun metal gate valve complete with PN16 pressure rating, as per specification no. FF-VL/GV
10
-
-
... More
Supplying and erecting 20 mm dia gun metal gate valve complete with PN16 pressure rating, as per specification no. FF-VL/GV
4
-
-
... More
Providing and fixing H.D.P container one piece moulded water tank made out of low density polythyler and built corrugation including of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow of all tanks capacity above 1000 to 20,000 litres
7000
-
-
... More
(SH: - 22.0- SANITARY WORKS)
-
-
-
... More
Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes,fittings & specials with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. 50 mm pipe 6 kgf/cm2
74
-
-
... More
Providing and fixing 75mm dia stabiliser pipe/ P.V.C. soilvent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions,slottedvent, clamps etc. complete
150
-
-
... More
Providing and fixing 100mm dia stabiliser pipe/ P.V.C. soilvent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions,slottedvent, clamps etc. complete
413
-
-
... More
Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of Joints complete as per direction of engineer in charge.110 mm dia 6Kgf/cm2
167
-
-
... More
Providing and fixing PVC pipes includings jointing of pipes with one step pvc solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer in Charge. 150 mm dia 6 Kgf/cm2
80
-
-
... More
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand) with R.C.C. top with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size,) inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) finished with a floating coat of neat cement complete as per standard design:Inside size 60 x 60 cm and 100 cm deep including C.I. cover 500 mm with frame (medium duty) : With bricks.Class designation 75
13
-
-
... More
Providing and fixing 15cmx10cm salt glazed stone ware gully trap in cement concrete1:4:8 outside the building including cast iron grating in the sink, connecting glazed stoneware pipe, brick masonry chamber with cast iron lid and cast iron grating for the gully trap.
3
-
-
... More
(SH: - 23.0 - PUMPS, FILTERS AND ASSOCIATED ACCESSORIES)
-
-
-
... More
: Supplying and fixing of horizontal centrifugal pump, with CI construction, CI impeller, mechanical seal,<br>complete with motor, base plate, foundation bolts, nuts ,pressure guage and all accessories. and<br>working with 415V, 3ph and 50 Hz frequency 1.50 Hp including cost and conveyance<br>of all materials, labour charges etc complete as directed by the Engineer in charge at all levels Capacity: 4m3/hr Head: 45m
4
-
-
... More
: Supplying and fixing of horizontal centrifugal pump, with CI construction, CI impeller, mechanical seal,<br>complete with motor, base plate, foundation bolts, nuts ,pressure guage and all accessories. and<br>working with 415V, 3ph and 50 Hz frequency 6Hp including cost and conveyance<br>of all materials, labour charges etc complete as directed by the Engineer in charge at all levels Capacity: 15m3/hr Head: 60m
4
-
-
... More
: Supplying and fixing of horizontal centrifugal pump, with CI construction, CI impeller, mechanical seal,<br>complete with motor, base plate, foundation bolts, nuts ,pressure guage and all accessories. and<br>working with 415V, 3ph and 50 Hz frequency 1Hp including cost and conveyance<br>of all materials, labour charges etc complete as directed by the Engineer in charge at all levels Capacity: 13m3/hr Head: 15m
4
-
-
... More
Supplying and fixing of vertical centrifugal pump, with CI construction, CI impeller, mechanical seal,<br>complete with motor, base plate, foundation bolts, nuts ,pressure guage and all accessories. and<br>working with 415V, 3ph and 50 Hz frequency 15Hp including cost and conveyance<br>of all materials, labour charges etc complete as directed by the Engineer in charge at all levels Capacity: 10m3/hr Head: 200m
2
-
-
... More
Supplying and fixing of vertical centrifugal pump, with CI construction, CI impeller, mechanical seal,<br>complete with motor, base plate, foundation bolts, nuts ,pressure guage and all accessories. and<br>working with 415V, 3ph and 50 Hz frequency 45Hp including cost and conveyance<br>of all materials, labour charges etc complete as directed by the Engineer in charge at all levels Capacity: 45m3/hr Head: 160m
2
-
-
... More
Supplying and erecting non return valve 40 mm dia in position made of gun metal complete.
8
-
-
... More
Supplying and erecting non return valve 50 mm dia in position made of gun metal complete.
4
-
-
... More
Supplying and erecting non return valve 100 mm dia in position made of gun metal complete.
4
-
-
... More
Supplying and erecting air release valve 100 mm dia
2
-
-
... More
Supplying and erecting air release valve 150 mm dia
2
-
-
... More
Supplying and fixing of the Butterfly Valve Dia 110 mm of UPVC valves including all necessary fittings, cost and conveyance of all materials, labour charges etc as directed by the Engineer in charge at all levels.
2
-
-
... More
Supplying and fixing of the Butterfly Valve Dia 160 mm of UPVC valves including all necessary fittings, cost and conveyance of all materials, labour charges etc as directed by the Engineer in charge at all levels.
2
-
-
... More
od233070/2022_2023 : Supplying and fixing of CI single flanged wall casting pipe with puddle, 0.6m length including cost and conveyance of all materials,labour charges,making good the walls etc complete as directed by the Engineer in Charge. 65mm
2
-
-
... More
od261769/2022_2023 : Supplying and fixing of CI single flanged wall casting pipe with puddle, 0.6m length including cost and conveyance of all materials,labour charges,making good the walls etc complete as directed by the Engineer in Charge. 80mm
4
-
-
... More
od233071/2022_2023 : Supplying and fixing of CI single flanged wall casting pipe with puddle, 0.6m length including cost and conveyance of all materials,labour charges,making good the walls etc complete as directed by the Engineer in Charge. 150mm
2
-
-
... More
Providing and fixing enclosed type water meter (bulk type) conforming to IS: 2373 and tested by Municipal Board complete with bolts, nuts, rubber insertions etc. ( The tail pieces if required will be paid separately):100mm dia nominal bore
1
-
-
... More
Providing and fixing enclosed type water meter (bulk type) conforming to IS: 2373 and tested by Municipal Board complete with bolts, nuts, rubber insertions etc. ( The tail pieces if required will be paid separately):150mm dia nominal bore
1
-
-
... More
Supplying & erecting Water level controller 230/415 V, A.C. , Four way under
ground & Over head tank operation only.
7
-
-
... More
HT EQUIPMENTS
-
-
-
... More
RMU: Design, Fabrication, Supply, Installation Testing and Commissioning of 11KV electrically Operated 21kA for 3 sec, 630A SF6 Insulated, Ring Main Unit outdoor type (IP-54) with 2 motorized Load Break Switch as incomer and 2 numbers VCB (fully rated earth switch) with fully encapsulated vacuum interrupter panel, 630 Amp continuously rated Cu/AL busbar complete with all accessories, protective relays, indicators, battery and battery charger, Manometer for indicating SF6 gas pressure with green zone marked on the scale, provision for padlocking for open, close, earth and test position etc. The RMU must be one side extensible type and compatible for SCADA system .The rate quoted shall be inclusive of hoisting to its location, assembling of units, lining up, bolting the units and checking all control wiring complete in all respects.
1
-
-
... More
Design, Fabrication, Supply, Installation Testing and Commissioning of 11KV electrically Operated 21kA for 3 sec, 630A SF6 Insulated, Ring Main Unit outdoor type (IP-54) with 4 Nos motorized Load Break Switch as incomer and 1 number VCB (fully rated earth switch) with fully encapsulated vacuum interrupter panel, 630 Amp continuously rated Cu/AL busbar complete with all accessories, protective relays, indicators, battery and battery charger, Manometer for indicating SF6 gas pressure with green zone marked on the scale, provision for padlocking for open, close, earth and test position etc. The RMU must be one side extensible type and compatible for SCADA system .The rate quoted shall be inclusive of hoisting to its location, assembling of units, lining up, bolting the units and checking all control wiring complete in all respects.
1
-
-
... More
TRANSFORMER: Supplying, installation, testing and commissioning 3 phase, 11/0.433 kV, 50 Hz., 400 kVA, indoor type, vacuum cast coil (VCC) dry type cast resin transformer, Copper wound , Dyn11 vector group, delta/star connection with additional neutral brought out on load side, for indoor use continuous duty, average temp rise of winding ( at principal tap) 115oC at ambient temp max 50o C & min -5oC at full load rating, with tapping (with off circuit tap links type tap changer) for off load +5 to - 5% @ 2.5% in +2/-2 steps, HV variation, class of insulation H/H, method of cooling AN, no load loss at rated voltage & frequency (+15% IS Tol) 1.15 kW, full load loss at rated current 3.60 kW, with 98.83 % efficiency at full load & 98.99 % at 1/2 full load, with 75 kV peak full wave lightning impulse withstand voltage with complete enclosure having IP 21 degree of protection, cable box arrangement at HV side & bus duct at LV side ,with rating & diagram plate, base channel, earthing terminals & WTI scanner with 3 PT-100 sensors, etc. standard accessories complete with test certificate (as per IS:11171 & IS 2026 ) with necessary permissions of Electrical Inspector, as per specification no SS- TR.
1
-
-
... More
PART - B- HV CABLES AND CABLING
-
-
-
... More
Supply of following sizes of XLPE insulated PVC sheathed, earthed,Aluminium conductor armoured power cable of 11 kV grade conforming to IS 7098 amended upto date.: 3C X 300 sq.mm, 11kV. Earthed Cable
4911
-
-
... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 kV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.:Above 120 sq. mm and upto 400 sq. mm
4800
-
-
... More
Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 11 kV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc as required.: Above 120 sq. mm and upto 400 sq. mm
464
-
-
... More
Laying of one number XLPE power cable of 11 kV grade of following size in the existing RCC/ HUME/ METAL pipe as required.:Above 120 sq. mm and upto 400 sq. mm
20
-
-
... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size in the existing masonry open duct as required.: Above 120 sq. mm and upto 400 sq. mm
20
-
-
... More
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 11 kV grade of following size on cable tray as required.: Above 120 sq. mm and upto 400 sq. mm
20
-
-
... More
Providing and erecting Heat shrinkable indoor termination kit for 11 kV ( E ) XLPE HT cable 3x240 to 300 sq. mm. with necessary material as per specification no. CB-JT/HT
4
-
-
... More
Providing and erecting Heat shrinkable out door termination kit for 11 kV ( E ) XLPE HT cable 3x240 to 300 sq. mm. with necessary material as per specification no. CB-JT/HT
2
-
-
... More
Providing and erecting Heat shrinkable straight through joint kit for 11 kV ( E ) XLPE HT cable 3x240 to 400 sq. mm. with necessary material as per specification no. CBJT/HT
11
-
-
... More
Supplying & erecting cast iron cable indicator plate buried along with route of cable for PVC / XLPE armoured cable as per specification no. CB-CIP
178
-
-
... More
PART C- UPS
-
-
-
... More
Supply, Installation, Testing and Commissioning of 10kVA, three phase input, three phase output, true on-line UPS system with 15 minutes back up at .9 pf, including all accessories, SMF batteries VRLA type with powder coated CRCA cabinet including all accessories such as cabling etc. as required complete having following specification. The UPS system consist of one number of UPS unit and one set of battery bank mounted in battery racks. Fully digital controlled based on DSP Power factor corrected from end 0.95 Pure sine wave output. Full time output voltage & frequency regulation Auto regulation of battery end voltage Intelligent interface with LED/LCD display Static bypass switch / manual bypass switch Auto temperature compensation.
2
-
-
... More
Supply, Installation, Testing and Commissioning of 5 kVA, Single phase input, single Phase output,true on-line UPS System with 15 minutes back up,including all accessories, SMF batteries VRLA type with powder coated CRCA cabinet including all accessories and cabling etc as required complete having following specification .The UPS system consist of one numbers of UPS unit and one set of battery bank ,Fully digital controlled based on DSP, Power factor corrected from end 0.9 , Pure sine wave output. Fulltime output voltage & frequency regulation Auto regulation of battery end voltage Intelligent interface with LED/LCD display Static bypass switch / manual by pass switch Auto temperature compensation,etc.
2
-
-
... More
Supply, Installation, Testing and Commissioning of 2 kVA, Single phase input, single Phase output,true on-line UPS System with 15 minutes back up,including all accessories, SMF batteries VRLA type with powder coated CRCA cabinet including all accessories and cabling etc as required complete having following specification .The UPS system consist of one numbers of UPS unit and one set of battery bank ,Fully digital controlled based on DSP, Power factor corrected from end 0.9 , Pure sine wave output. Fulltime output voltage & frequency regulation Auto regulation of battery end voltage Intelligent interface with LED/LCD display Static bypass switch / manual by pass switch Auto temperature compensation,etc.
2
-
-
... More
PART D- Deisel Generator
-
-
-
... More
Supply, Installation, Testing and Commissioning of outdoor type 400 KVA Prime rated D.G Set with acoustic enclosure and Control panel, protection and digital metering, controls and interlocks, CTs and transducers for all metering and protection and suitable FP MCCB etc. ,including antivibration mountings, exhaust silencer conforming to latest environment protection regulations for emission - CPCB IV+ and noise levels complete with , water/ coolant cooled, (radiator type) four stroke, electric start conforming to BS: 5514 400 KVA prime rating, brushless, self-excited, self-regulated and suitable for continuous operation at 1500RPM, generating 415 V+/-5% Volts at 0.8 p.f (lag), 50Hz,3 phase, 4 wire system generally conforming to BS: 2613 & IS: 4722.Both Engine and Alternator shall be mounted on common channel iron base frame, and with standard accessories such as lead acid batteries and engine driven battery charger along with leads, battery stand, necessary control wiring with control cables, first fill of lubricating oil, and earthing as per standards Fuel tank , fuel piping from fuel tank to Engine, Residential silencer, suitable size Cable termination box with extended Alternator terminal with bus bars etc as required and as per specifications. The work should be as per Electrical Inspectorate/ Central Pollution control board standards.
1
-
-
... More
PART E- LT PANEL BOARD AND ACCESSORIES
-
-
-
... More
MSB: Supply, Installation, Testing & Commissioning of fully type tested 415V, 50Hz, design verified LT switch board conforming to IEC 61439 Part 1&2 fabricated from ASTA/ASEFA/DECRA/KEMA/LOVAG/UL/CPRI/ERDA certified vendors and shall be authorised panel fabricators of approved makes of OEM's. The enclosure shall be CRCA sheet of thickness as per the type tested design of OEM which shall be free standing with floor mounting base with suitable mounting brackets with following switchgears, metering instruments and accessories etc. complete as required as per drawing & specifications as required to complete installation. The size of the enclosure shall be as per the design of verified panel. The IP rating shall be 42 or better and form of construction shall be form 4b. Fire suppression flooded system to the panel in complete as per requirement. The short circuit rating shall be suitable to with stand the SC rating of incomer breaker. The enclosure shall be powder coated after 7 tank process. The control wiring for voltage circuit shall be with 1.5 sq.mm and for current circuits with 2.5 sq.mm HFFR wire. Protections for control devices shall be with approriatly rated HRC fuses. The panel shall be suitable for TOP/BOTTOM Cable ENTRY. The Incomer should suitable for cable of size mentioned in the SLD. Incomer - 1 & 2 : 630A, Four pole, 50 kA, Electrical Draw Out type ACB with microprocessor based adjustable over current and earth fault relesae , RS 485 communication facility, - 2Nos
Instruments: 4A, HRC -as per SLD, Digital Power Analyser with RS 485 Comunication Facility-as per SLD. Power Quality Meter (PQM) needs to comply to Active energy accuracy of Class 0.2S as per IEC 62053-22. Relevant type test documents tested in third party labs to be produced. Power Quality Meter (PQM) needs to comply to Voltage, Current, Active Power, Power Factor, Frequency as per IEC 61557-12,RYB indication lamp, LED type - as per SLD, 630/5A 15VA class 1 resin cast CT -as per SLD, AMF- as per SLD, Low set earth fault relay -as per SLD , Surge Protection Device(TYPE 1)-as per SLD, Digital Multifunction Meter for three phase 4 wire operation with RS 485 Communication Facility - as per SLD , ON/OFF/TRIP indication lamp, LED type - as per SLD.Busbar : 630A TPN busbar chamber with Aluminium busbar Out goings: 4A, HRC -as per SLD, Digital Multifunction Meter for three phase 4 wire operation with RS 485 Communication Facility - as per SLD, 250 A FP Module Case Circuit Breaker Thermal Magnetic Based - 3Nos, 160 A FP Module Case Circuit Breaker microprocessor Based - 2Nos, 100 A FP Module Case Circuit Breaker Thermal Magnetic Based - 2Nos, 200A MCCB ISOLATOR - 1Nos, 250/5A 15VA class 1 resin cast CT -as per SLD, 160/5A 15VA class 1 resin cast CT -as per SLD, 100/5A 15VA class 1 resin cast CT -as per SLD, The panel shall be with top/bottom entry to receive incoming & outgoing cable/bus duct, scada compability for operation and monitoring of all circuit breakers, all necessary interconnection & accessories as per particular specification & single line diagram.
1
-
-
... More
HVAC SB:
Supply, Installation, Testing & Commissioning of fully type tested 415V, 50Hz, design verified LT switch board conforming to IEC 61439 Part 1&2 fabricated from ASTA/ASEFA/DECRA/KEMA/LOVAG/UL/CPRI/ERDA certified vendors and shall be authorised panel fabricators of approved makes of OEM's. The enclosure shall be CRCA sheet of thickness as per the type tested design of OEM which shall be free standing with floor mounting base with suitable mounting brackets with following switchgears, metering instruments and accessories etc. complete as required as per drawing & specifications as required to complete installation. The size of the enclosure shall be as per the design of verified panel. The IP rating shall be 42 or better and form of construction shall be form 4b. Provision for installing fire suppression flooded system to the panel in complete as per requirement. The short circuit rating shall be suitable to with stand the SC rating of incomer breaker. The enclosure shall be powder coated after 7 tank process. The control wiring for voltage circuit shall be with 1.5 sq.mm and for current circuits with 2.5 sq.mm HFFR wire. Protections for control devices shall be
with approriatly rated HRC fuses. The panel shall be suitable for TOP/BOTTOM Cable ENTRY. The Incomer should suitable for cable of size mentioned in the SLD. Incomer : 250A FP Module Case Circuit Breaker Thermal Magnetic Based - 1
Instruments : 4A, HRC -as per SLD, RYB indication lamp, LED type - as per SLD, 250/5A 15VA class 1 resin cast CT -as per SLD, Surge Protection Device(TYPE 1)-as per SLD, Digital Multifunction Meter for three phase 4 wire operation with RS 485 Communication Facility - as per SLD
Busbar :250A TPN busbar chamber with Aluminium busbar Out goings:100 A FP Module Case Circuit Breaker Thermal Magnetic Based - 6Nos, 63A FP Module Case Circuit Breaker Thermal Magnetic Based - 4Nos, The panel shall be with top/bottom entry to receive incoming & outgoing cable/bus duct, scada compability for operation and monitoring of all circuit breakers, all necessary interconnection & accessories as per particular specification & single line diagram.
1
-
-
... More
Supply, Installation, Testing & Commissioning of fully type tested 415V, 50Hz, design verified LT switch board conforming to IEC 61439 Part 1&2 fabricated from ASTA/ASEFA/DECRA/KEMA/LOVAG/UL/CPRI/ERDA certified vendors and shall be authorised panel fabricators of approved makes of OEM's. The enclosure shall be CRCA sheet of thickness as per the type tested design of OEM which shall be free standing with floor mounting base with suitable mounting brackets with following switchgears, metering instruments and accessories etc. complete as required as per drawing & specifications as required to complete installation. The size of the enclosure shall be as per the design of verified panel. The IP rating shall be 42 or better and form of construction shall be form 4b. Provision for installing fire suppression flooded system to the panel in complete as per requirement. The short circuit rating shall be suitable to with stand the SC rating of incomer breaker. The enclosure shall be powder coated after 7 tank process. The control wiring for voltage circuit shall be with 1.5 sq.mm and for current circuits with 2.5 sq.mm HFFR wire. Protections for control devices shall be
with approriatly rated HRC fuses. The panel shall be suitable for TOP/BOTTOM Cable ENTRY. The Incomer should suitable for cable of size mentioned in the SLD. Incomer : 125A FP Module Case Circuit Breaker Thermal Magnetic Based - 1
Instruments :4A, HRC -as per SLD,RYB indication lamp, LED type - as per SLD, 125/5A 15VA class 1 resin cast CT -as per SLD, Surge Protection Device(TYPE 1)-as per SLD, Digital Multifunction Meter for three phase 4 wire operation with RS 485 Communication Facility - as per SLD
Busbar:125A TPN busbar chamber with Aluminium busbar Out goings:100 A FP Module Case Circuit Breaker Thermal Magnetic Based - 6Nos
The panel shall be with top/bottom entry to receive incoming & outgoing cable/bus duct, scada compability for operation and monitoring of all circuit breakers, all necessary interconnection & accessories as per particular specification & single line diagram.
1
-
-
... More
Auxillary panel
Supply, Installation, Testing & Commissioning of fully type tested 415V, 50Hz, design verified LT switch board conforming to IEC 61439 Part 1&2 fabricated from ASTA/ASEFA/DECRA/KEMA/LOVAG/UL/CPRI/ERDA certified vendors and shall be authorised panel fabricators of approved makes of OEM's. The enclosure shall be CRCA sheet of thickness as per the type tested design of OEM which shall be free standing with floor mounting base with suitable mounting brackets with following switchgears, metering instruments and accessories etc. complete as required as per drawing & specifications as required to complete installation. The size of the enclosure shall be as per the design of verified panel. The IP rating shall be 42 or better and form of construction shall be form 4b Provision for installing fire suppression flooded system to the panel in complete as per requirement. The short circuit rating shall be suitable to with stand the SC rating of incomer breaker. The enclosure shall be powder coated after 7 tank process. The control wiring for voltage circuit shall be with 1.5 sq.mm and for current circuits with 2.5 sq.mm HFFR wire. Protections for control devices shall be with approriatly rated HRC fuses. The panel shall be suitable for TOP/BOTTOM Cable ENTRY. The Incomer should suitable for cable of size mentioned in the SLD. Incomer :100A FP Module Case Circuit Breaker Thermal Magnetic Based - 1
Instruments : 4A, HRC -as per SLD, RYB indication lamp, LED type - as per SLD, 100/5A 15VA class 1 resin cast CT -as per SLD, Digital Multifunction Meter for three phase 4 wire operation with RS 485 Communication Facility - as per SLD
Busbar :100A TPN busbar chamber with Aluminium busbar Out goings:63A TP+NL Module Case Circuit Breaker Thermal Magnetic Based - 2Nos, 40A TP+NL Module Case Circuit Breaker Thermal Magnetic Based - 4Nos, 25A TP+NL Module Case Circuit Breaker Thermal Magnetic Based - 5Nos, 40A DP Module Case Circuit Breaker Thermal Magnetic Based - 2Nos
The panel shall be with top/bottom entry to receive incoming & outgoing cable/bus duct, scada compability for operation and monitoring of all circuit breakers, all necessary interconnection & accessories as per particular specification & single line diagram.
1
-
-
... More
FIRE PANEL:
Supply, Installation, Testing & Commissioning of fully type tested 415V, 50Hz, design verified LT switch board conforming fabricated from ASTA/ASEFA/DECRA/KEMA/LOVAG/UL/CPRI/ERDA certified vendors and shall be authariszed panel fabricators of approved makes of OEM's. The enclosure shall be CRCA sheet of thickness as per the type tested design of OEM which shall be free standing with floor mounting base with suitable mounting brackets with following switchgears, metering instruments and accessories etc. complete as required as per drawing & specifications. as required to complete installation. The size of the enclosure shall be as per the design of verified panel.The IP rating shall be 42 or better and form of construction shall be form 4b .The short circuit rating shall be suitable to with stand the SC rating of incomer breaker. The enclosure shall be powder coated after 7 tank process. The control wiring for voltage circuit shall be with 1.5 sq.mm and for current circuits with 2.5 sq.mm HFFR wire. Protections for control devices shall be with approriatly rated HRC fuses. The panel shall be suitable for TOP/BOTTOM Cable ENTRY.
Instruments:RYB Indicating lamps LED type -As per SLD, 4A HRC-As per SLD, (0-500)V Class 1 with 90 deg defl. Scale-As per SLD, (0-400A Class 1 with 90 deg defl. Scale -As per SLD, Voltmeter selector switch -As per SLD, Ammeter selector switch -As per SLD, 400/5 A 15 VA Class 1 CTs -As per SLD, ON/OFF INDICATION LAMP -As per SLD, Digital multifunction meter with RS 485 facility to read V,A.Hz,PF,Kwh- As per SLD
Incomer: 200A FP MCCB ISOLATOR -1, 200A TPN busbar chamber with Aluminium busbar
Out goings: 125A TP MCCB ISOLATOR - 1, 63A TP MCCB ISOLATOR - 1, 32A TP MCCB ISOLATOR - 1, 25A DP MCB-1Nos, 3 phase FASD starter with on/off push button,single phasing preventer and auxillary & power contactors, for 55 kW motor -1 Nos. , 3 phase FASD starter with on/off push button, single phasing preventer and auxillary & power contactors, for 11.2 kW motor -1 Nos. , 3 phase DOL starter with on/off push button, single phasing preventer and auxillary & power contactors, for 7.5 kW motor -1 Nos. Diesel Engine Control - 1 No. Each Diesel engine control consisting of: 25A DP C curve control MCB, 25A On/off control switch - 1 No. , Auto / manual selector switch, 3 attempt starting device, push button etc., All required timers, relays, fuses and accessories for automatic operation of diesel engine. Indication lamp for high water temperature, engine fail to start, engine On indication, high/low lube oil pressure.
Necessary control wiring for start / stop solenoid, line / oil pressure switch, temperature switch, pressure switch to fire pump panel, diesel engine control panel to fire pump panel etc.
Battery Charger suitable for 12 V / 24 V DC with boost and trickle selector switch, 0 -15 V / 0 - 30 V DC volt meter, 0 - 20 A DC Ammeter - 02 No. 6 panel annunciation window for fault indication with hooter, accept & reset push button, separate hooter for Diesel /electrical pump on running condition - 1 No
The system shall include all accessories to control the operation of main electric pump, diesel pump, jockey pump as per the operating sequence for the fire fighting system indicated in the technical specification . The battery charger and all its components should be housed inside the main fire pump panel. The panel shall be painted with approved colour. The Scope of works also includes LT power & control cabling including the GI ladder type cable tray & necessary MS supports.etc complete in all respects as per technical specification.
The panel shall be Top/ Bottom Entry/Exit and suitable for termination of cable system as per SLD and technical specification.
1
-
-
... More
125kVAR STATIC VAR GENERATOR:
Design,Supply, Installation, Testing & Commissioning of Static VAR Generator (SVG) 125 kVAr, 480VAC, 3Ph. , 50Hz, LT switch board conforming from certified vendors and shall be authorised panel fabricators of approved makes of OEM's. The enclosure shall be CRCA sheet of thickness as per the type tested design of OEM which shall be free standing with floor mounting base with suitable mounting brackets with following switchgears, metering instruments and accessories etc. complete as required The SVG Panel contains the following components:Incomer MCCB-200 A 3P,Control fuse with suitable rating,Contactor 150A AC3 duty,Input Hall device 150A,Single Advanced 32 Bit DSP Controller With 7” Touch Screen Display with Harmonic Reduction facility,IGBT Module-300A 3-level T-type NPC modules,DC Capacitor minimum 5600uF, 450V DC,Cooling Fans,LCL filter Inductor with Toroidal powder iron core Inductor with specially design High frequency saturation protection with lower losses,LCL filter 3-ph Capacitor etc.The panel shall be Top Entry/Exit and suitable for termination of cable/Bus system as per SLD and technical specification
Note:the requirement mentioned above is minimum contractor shall do the complete design in cordination with OEM and supply the panel as required.
1
-
-
... More
PUMP PANEL- TERMINAL
Supply, Installation, Testing & Commissioning of fully type tested 415V, 50Hz, design verified LT switch board conforming to IEC 61439 Part 1&2 fabricated from ASTA/ASEFA/DECRA/KEMA/LOVAG/UL/CPRI/ERDA certified vendors and shall be authariszed panel fabricators of approved makes of OEM's. The enclosure shall be CRCA sheet of thickness as per the type tested design of OEM which shall be free standing with floor mounting base with suitable mounting brackets with following switchgears, metering instruments and accessories etc. complete as required as per drawing & specifications. as required to complete installation. The size of the enclosure shall be as per the design of verified panel.The IP rating shall be 42 or better and form of construction shall be form 4b. The short circuit rating shall be suitable to with stand the SC rating of incomer breaker. The enclosure shall be powder coated after 7 tank process. The control wiring for voltage circuit shall be with 1.5 sq.mm and for current circuits with 2.5 sq.mm HFFR wire. Protections for control devices shall be with approriatly rated HRC fuses. The panel shall be suitable for TOP/BOTTOM Cable ENTRY.
Instruments: RYB Indicating lamps LED type -As per SLD, 4A HRC - AS PER SLD, ON/OFF INDICATION LAMP -As per SLD, Digital multifunction meter with RS 485 facility to read V,A.Hz,PF,Kwh- As per SLD, 250/5 A 15 VA Class 1 CTs -As per SLD
Incomer: 250A FP Moulded Case Circuit Breaker Thermal magnetic -1No, 250A TPN busbar chamber with Aluminium busbar
Out goings: 200 A TP+ NL MCCB -3Nos, 100 A TP+ NL MCCB -3Nos, 3 phase star delta starter with on/off push button,thermal overload relay, short circuit protection, single phasing preventer and auxillary & power contactors, for 45 HPmotor -2 Nos. , 3 phase star delta starter with on/off push button,thermal overload relay, short circuit protection, single phasing preventer and auxillary & power contactors, for 15 HPmotor -2 Nos. , The panel shall be Top/ Bottom Entry/Exit and suitable for termination of cable system as per SLD and technical specification.
1
-
-
... More
PUMP PANEL- 1 CARGO: Supply, Installation, Testing & Commissioning of fully type tested 415V, 50Hz, design verified LT switch board conforming to IEC 61439 Part 1&2 fabricated from ASTA/ASEFA/DECRA/KEMA/LOVAG/UL/CPRI/ERDA certified vendors and shall be authariszed panel fabricators of approved makes of OEM's. The enclosure shall be CRCA sheet of thickness as per the type tested design of OEM which shall be free standing with floor mounting base with suitable mounting brackets with following switchgears, metering instruments and accessories etc. complete as required as per drawing & specifications. as required to complete installation. The size of the enclosure shall be as per the design of verified panel.The IP rating shall be 42 or better and form of construction shall be form 4b. The short circuit rating shall be suitable to with stand the SC rating of incomer breaker. The enclosure shall be powder coated after 7 tank process. The control wiring for voltage circuit shall be with 1.5 sq.mm and for current circuits with 2.5 sq.mm HFFR wire. Protections for control devices shall be with approriatly rated HRC fuses. The panel shall be suitable for TOP/BOTTOM Cable ENTRY.
Instruments: RYB Indicating lamps LED type -As per SLD, 4A HRC - AS PER SLD, ON/OFF INDICATION LAMP -As per SLD, Digital multifunction meter with RS 485 facility to read V,A.Hz,PF,Kwh- As per SLD, 40/5 A 15 VA Class 1 CTs -As per SLD, Incomer: 40A FP Moulded Case Circuit Breaker Thermal magnetic (Ics =100%Icu= 25kA) -1Nos, 40A TPN busbar chamber with Aluminium busbar
Out goings: 10 A TP MPCB -4Nos, 4 A TP MPCB -2Nos, 2.5A TP MPCB -4Nos, 25A SP MCB - 1 NO, 3 phase star delta starter with on/off push button,thermal overload relay, short circuit protection, single phasing preventer and auxillary & power contactors, for 6 HPmotor -2 Nos. , 3 phase DOL starter with on/off push button,thermal overload relay, short circuit protection, single phasing preventer and auxillary & power contactors, for 1.5HPmotor - 2 Nos. , 3 phase DOL starter with on/off push button,thermal overload relay, short circuit protection, single phasing preventer and auxillary & power contactors, for 1HPmotor - 4 Nos. , The panel shall be Top/ Bottom Entry/Exit and suitable for termination of cable system as per SLD and technical specification
1
-
-
... More
PART F- LT CABLING
Supply of 1.1 kV grade XLPE insulated, PVC sheathed, FRLS, armoured Aluminium / Copper conductor cable conforming to IS 7098 (Part 1) amended upto date.
-
-
-
... More
3.5C 400 Sq.mm Al
1370
-
-
... More
3.5C 240 Sq. mm Al
72
-
-
... More
3.5C 70 Sq. mm Al
28
-
-
... More
4C 35 Sq.mm Al
182
-
-
... More
4C 16 Sq.mm Al
171
-
-
... More
4C 10 Sq.mm Al
1452
-
-
... More
4C 4 Sq.mm Cu
117
-
-
... More
4C 6 Sq.mm Cu
65
-
-
... More
4C 2.5 Sq.mm Cu
260
-
-
... More
3C 95 Sq.mm Al
55
-
-
... More
3C 50 Sq.mm Al
220
-
-
... More
3C 16 Sq.mm Al
260
-
-
... More
3C 10 Sq.mm Al
468
-
-
... More
3C 4 Sq.mm Cu
260
-
-
... More
3C 6 Sq.mm Cu
260
-
-
... More
3C 2.5 Sq.mm Cu
1300
-
-
... More
3C 1.5 Sq.mm Cu
390
-
-
... More
2C 4 Sqmm Cu
650
-
-
... More
2C 2.5 Sqmm Cu
165
-
-
... More
2C 1.5 Sqmm Cu
165
-
-
... More
12C 2.5 Sqmm Cu
165
-
-
... More
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
-
-
-
... More
3.5C 400 Sq.mm Al
8
-
-
... More
3.5C 240 Sq. mm Al
4
-
-
... More
3.5C 185 Sq. mm Al
2
-
-
... More
3.5C 70 Sq. mm Al
4
-
-
... More
4C 35 Sq.mm Al
14
-
-
... More
4C 16 Sq.mm Al
8
-
-
... More
4C 10 Sq.mm Al
22
-
-
... More
4C 4 Sq.mm Cu
12
-
-
... More
4C 6 Sq.mm Cu
6
-
-
... More
4C 2.5 Sq.mm Cu
50
-
-
... More
3C 95 Sq.mm Al
2
-
-
... More
3C 50 Sq.mm Al
4
-
-
... More
3C 16 Sq.mm Al
8
-
-
... More
3C 10 Sq.mm Al
8
-
-
... More
3C 4 Sq.mm Cu
16
-
-
... More
3C 6 Sq.mm Cu
8
-
-
... More
3C 2.5 Sq.mm Cu
30
-
-
... More
3C 1.5 Sq.mm Cu
30
-
-
... More
2C 4 Sqmm Cu
30
-
-
... More
2C 2.5 Sqmm Cu
30
-
-
... More
2C 1.5 Sqmm Cu
30
-
-
... More
12C 2.5 Sqmm Cu
30
-
-
... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.
-
-
-
... More
Upto 35 sq. mm
685
-
-
... More
Above 35 sq. mm and upto 95 sq. mm
165
-
-
... More
Above 185 sq. mm and upto 400 sq. mm
920
-
-
... More
Laying of one number additional PVC insulated and PVC sheathed/ XLPE power cable of 1.1 kV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc as required.
-
-
-
... More
Upto 35 sq. mm
210
-
-
... More
Above 35 sq. mm and upto 95 sq. mm
63
-
-
... More
Above 185 sq. mm and upto 400 sq. mm
365
-
-
... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size in the existing RCC/ HUME/ METAL pipe as required.
-
-
-
... More
Upto 35 sq. mm
137
-
-
... More
Above 35 sq. mm and upto 95 sq. mm
15
-
-
... More
Above 185 sq. mm and upto 400 sq. mm
15
-
-
... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size in the existing masonry open duct as required.
-
-
-
... More
Upto 35 sq. mm
145
-
-
... More
Above 35 sq. mm and upto 95 sq. mm
15
-
-
... More
Above 185 sq. mm and upto 400 sq. mm
15
-
-
... More
Laying and fixing of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 kV grade of following size on wall surface as required.
-
-
-
... More
Upto 35 sq. mm (clamped with 1mm thick saddle)
3566
-
-
... More
Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp)
15
-
-
... More
Above 185 sq. mm and upto 400 sq. mm (clamped with 40x3mm MS flat clamp)
177
-
-
... More
Laying and fixing of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 kV grade of following size on cable tray as required.
-
-
-
... More
Upto 35 sq. mm (clamped with 1mm thick saddle)
1587
-
-
... More
Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp)
30
-
-
... More
Above 185 sq. mm and upto 400 sq. mm (clamped with 40x3mm MS flat clamp)
225
-
-
... More
Supplying and erecting ISI mark GI pipe 40 mm. dia. „B‟ class at position with accessories complete. Specification no. CW-PLB/GP.
150
-
-
... More
Supplying and erecting ISI mark GI pipe 50 mm dia.„B‟ class at position with accessories complete. Specification no. CW-PLB/GP.
200
-
-
... More
Supplying and erecting ISI mark GI pipe 100 mm dia. „B‟ class at position with accessories complete. Specification no. CW-PLB/GP.
100
-
-
... More
Providing & erecting Hot dipped galvanized ladder type cable tray manufactured from 16 swg (1.6 mm thick) GI sheet of 150 mm width & 100 mm height comprising all required standard accessories.
50
-
-
... More
Providing & erecting Hot dipped galvanized ladder type cable tray manufactured from 16 swg (1.6 mm thick) GI sheet of 200 mm width & 100 mm height comprising all required standard accessories.
50
-
-
... More
Providing & erecting Hot dipped galvanized ladder type cable tray manufactured from 16 swg (1.6 mm thick) GI sheet of 300 mm width & 100 mm height comprising all required standard accessories.
75
-
-
... More
Providing & erecting Hot dipped galvanized ladder type cable tray manufactured from 16 swg (1.6 mm thick) GI sheet of 400 mm width & 100 mm height comprising all required standard accessories.
50
-
-
... More
Providing & erecting Hot dipped galvanized ladder type cable tray manufactured from 16 swg (1.6 mm thick) GI sheet of 500 mm width & 100 mm height comprising all required standard accessories.
270
-
-
... More
Providing & erecting hot dipped galvanised cover suitable for perforated type Cable tray manufactured from 18 SWG (1.2 mm thick) GI sheet of 150 mm width & 20 mm height complete with necessary hardware.
540
-
-
... More
Providing & erecting hot dipped galvanised cover suitable for perforated type Cable tray manufactured from 18 SWG (1.2 mm thick) GI sheet of 200 mm width & 20 mm height complete with necessary hardware.
100
-
-
... More
Providing & erecting hot dipped galvanised cover suitable for perforated type Cable tray manufactured from 18 SWG (1.2 mm thick) GI sheet of 300 mm width & 20 mm height complete with necessary hardware.
100
-
-
... More
Providing & erecting hot dipped galvanised cover suitable for perforated type Cable tray manufactured from 18 SWG (1.2 mm thick) GI sheet of 400 mm width & 20 mm height complete with necessary hardware.
50
-
-
... More
Providing & erecting hot dipped galvanised cover suitable for perforated type Cable tray manufactured from 18 SWG (1.2 mm thick) GI sheet of 500 mm width & 20 mm height complete with necessary hardware.
25
-
-
... More
Supply, fabricating and installing MS items such as Tees/ angles/ channels etc. on floor/ ceiling/ wall including necessary civil work such as grouting, finishing etc. and painting with two coats of primer and two coats of synthetic enamel paint as required
262
-
-
... More
Supplying SMC chequered plates of size 4ft x 2ft, hot press moulded from advanced composites of plastics namely sheet moulding compound of thickness 5 mm with nsulation level suitable for 33 kV and fixing it to substation floor with SR-998 adhesive along with 5 mm thick E.P. foam complete.
15
-
-
... More
PART G- WIRING AND ACCESSORIES
-
-
-
... More
Supplying & erecting HMS PVC conduit 20 mm. dia. With necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC.
1500
-
-
... More
Supplying & laying HMS PVC conduit 20 mm dia. With necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC.
1500
-
-
... More
Supplying & erecting HMS PVC conduit 25 mm. dia. With necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC.
1000
-
-
... More
Supplying & laying HMS PVC conduit 25 mm dia with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC.
1000
-
-
... More
Supplying & erecting HMS PVC conduit 32 mm dia. With necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC.
500
-
-
... More
Supplying & laying HMS PVC conduit 32 mm dia. With necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC.
500
-
-
... More
Supplying & erecting rigid steel conduit 16 SWG 20 mm dia. with necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC.
300
-
-
... More
Supplying & laying rigid steel conduit 16 SWG - 20 mm. dia. with necessary accessories in RCC work/false ceiling/false flooring as per specification No: WG-MA/CC.
300
-
-
... More
Supplying & erecting rigid steel conduit 16 SWG 25 mm dia. with necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC.
200
-
-
... More
Supplying & laying rigid steel conduit 16 SWG 25 mm. dia. with necessary accessories in RCC work/false ceiling/false flooring as per specification No: WG-MA/CC.
200
-
-
... More
Supplying & erecting rigid steel conduit 16 SWG 32 mm dia. with necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC.
100
-
-
... More
Supplying & laying rigid steel conduit 16 SWG 32 mm. dia. with necessary accessories in RCC work/false ceiling/false flooring as per specification No: WG-MA/CC.
100
-
-
... More
Supplying and erecting 20mm dia. corrugated flexible polypropylene conduit
100
-
-
... More
Supplying and erecting 25 mm dia. corrugated flexible polypropylene conduit
100
-
-
... More
Supplying & erecting mains with 2x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WGMA/ BW
1500
-
-
... More
Supplying & erecting mains with 3x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WGMA/ BW
8000
-
-
... More
Supplying & erecting mains with 3x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WGMA/ BW
2000
-
-
... More
Supplying & erecting mains with 3x4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WGMA/ BW
2000
-
-
... More
Supplying & erecting mains with 3x6 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WGMA/ BW
1500
-
-
... More
Supplying and erecting PVC Surface modular switch box with double mounting plate for 1 module complete duly erected.
10
-
-
... More
Supplying and erecting PVC Surface modular switch box with double mounting plate for 2 modules duly erected.
10
-
-
... More
Supplying and erecting PVC Surface modular switch box with double mounting plate for 3 modules duly erected.
10
-
-
... More
Supplying and erecting PVC Surface modular switch box with double mounting plate for 4 modules duly erected.
20
-
-
... More
Supplying and erecting PVC Surface modular switch box with double mounting plate for 6 modules duly erected.
10
-
-
... More
Supplying and erecting PVC Surface modular switch box with double mounting for 8 modules complete duly connected.
10
-
-
... More
Supplying and erecting PVC Surface modular switch box with double mounting plate for 12 modules duly erected.
5
-
-
... More
Supplying and erecting PVC Surface modular switch box with double mounting plate for 16 / 18 module duly erected.
5
-
-
... More
Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 1 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background..
20
-
-
... More
Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 2 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.
20
-
-
... More
Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 3 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.
25
-
-
... More
Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 4 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.
40
-
-
... More
Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 6 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.
40
-
-
... More
Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 8 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.
10
-
-
... More
Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 12 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.
5
-
-
... More
Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 16 / 18 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.
5
-
-
... More
Supplying and erecting ISI mark modular type blanking plate one module, duly erected on provided plate & box.
50
-
-
... More
Supplying and erecting ISI mark modular type blanking plate two module, duly erected on provided plate & box.
10
-
-
... More
Supplying and erecting ISI mark modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete.
24
-
-
... More
Supplying and erecting ISI mark modular type switch 16A duly erected on provided plate and box with wiring connections complete.
56
-
-
... More
Supplying and erecting ISI mark modular type bell-push with indicator 2 modules 6A / 10A, duly erected on provided plate and box with wiring connections complete.
1
-
-
... More
Supplying and erecting ISI mark modular type Two way switch 6A / 10A (2 Module), duly erected on provided plate and box with wiring connections complete.
5
-
-
... More
Supplying and erecting ISI mark modular type switch 16 / 20 A with indicator, duly erected on provided plate and box with wiring connections complete.
5
-
-
... More
Supplying and erecting ISI mark modular type switch one way 16 / 20 A, duly erected on provided plate and box with wiring connections complete with neon indicator.
5
-
-
... More
Supplying and erecting ISI mark modular type D.P. switch 32A with indicator, duly erected on provided plate and box with wiring connections complete.
5
-
-
... More
Supplying and erecting ISI mark modular type 3 pin 6A multi sockets with safety shutter, duly erected on provided plate and box with wiring connections complete.
24
-
-
... More
Supplying and erecting ISI mark modular type 3 pin 6 / 16A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete.
56
-
-
... More
Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required. 160 mm dia (OD-160 mm & ID-135 mm nominal)
650
-
-
... More
Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc as required. 300 mm dia
60
-
-
... More
PART H-MCBs AND MCB DISTRIBUTION BOARDS
-
-
-
... More
Supplying & erecting triple pole and neutral distribution board (TPNDB) with door surface/ flush mounted suitable for 3 pole MCCB as incomer & outgoing SP MCB (24 poles) or TP MCB of 8 ways (24 poles) , on iron/ GI frame. (vertical busbar type) as per specification no. SW-SWR/MCBDB1
2
-
-
... More
Supplying and erecting single pole and neutral distribution board (SPNDB),with 2 ways for incoming and 10 ways (10 poles) for outgoing SP MCBs, with door, 1.2mm thickness surface / flush mounted, IP 43 Protection on iron /GI frame as per specification no. SW-SWR/MCBDB
2
-
-
... More
Supplying & erecting triple pole and neutral distribution board (TPNDB), SPMCB of 8 ways / phase (24 poles), with door, 1.2mm thickness surface/ flush mounted, IP 43 Protection on iron/GI frame (horizontal busbar type) as per specification no. SW-SWR/MCBDB
4
-
-
... More
Supplying & erecting triple pole and neutral distribution board (TPNDB),SPMCB of 6 ways / phase (18 poles), with door, 1.2mm thickness surface/ flush mounted, IP 43 Protection on iron/GI frame (horizontal busbar type) as per specification no. SW-SWR/MCBDB
6
-
-
... More
Supplying & erecting triple pole and neutral distribution board (TPNDB), SP/TP MCBs total 8 ways /24 poles, with door, 1.2mm thickness surface/flush mounted, IP 43 Protection on iron/GI frame (vertical busbar type) as per specification no. SW-SWR/MCBDB
2
-
-
... More
Supplying & erecting triple pole and neutral distribution board (TPNDB), SP/TP MCBs total 6 ways /18poles, with door, 1.2mm thickness surface/flush mounted, IP 43 Protection on iron/GI frame (vertical busbar type) as per specification no. SW-SWR/MCBDB
3
-
-
... More
Supplying, erecting & commissioning 2 pole RCCB 16/25A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB
2
-
-
... More
Supplying, erecting & commissioning 4 pole RCCB 16/25A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB
8
-
-
... More
Supplying, erecting & commissioning 4 pole RCCB 40A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB
7
-
-
... More
Supplying, erecting & marking SPMCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB
186
-
-
... More
Supplying, erecting & marking DPMCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB
2
-
-
... More
Supplying, erecting & marking TPMCB 6A to 32A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB
24
-
-
... More
Supplying, erecting & marking TPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB
8
-
-
... More
Supplying, erecting & marking FPMCB 6A to 32A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB
6
-
-
... More
Supplying, erecting & marking FPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB
5
-
-
... More
Supplying, erecting and marking four pole isolators only switch version of miniature circuit breakers of 40A in provided distribution board.
2
-
-
... More
Supplying, erecting and marking four pole isolators only switch version of miniature circuit breakers of 63A in provided distribution board.
4
-
-
... More
Supplying, erecting and marking double pole isolator only switch version of miniature circuit breaker of 40A with required wiring connections and lugs etc.in provided distribution board.
14
-
-
... More
Supplying & erecting CRCA sheet metal one way enclosures of 1.2mm thickness suitable for DP MCB /TP MCB/FP MCB/RCCB/RCBO complete erected on angle iron/GI frame.
20
-
-
... More
Providing & erecting 4 Pole MCCB 100A, 415V, with short circuit rating 25 kA (Ics=100% of Icu ),adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides, in provided enclosure on iron /GI frame as per specification no. SW-SWR/MCCB
2
-
-
... More
Supplying & erecting CRCA sheet metal enclosures of 1.2mm thickness with 30 A, 3 pin plug & earth socket and 30A, 3 pin plug top with 30A triple pole MCB having rated short - circuit breaking capacity (Icn) 10kA complete erected on angle iron / GI frame.
2
-
-
... More
Supplying and erecting blanking plate of suitable size on MCB DB complete.
44
-
-
... More
Supply and fixing of cable entry adapter box for SPN DBs including all accessories as required complete
2
-
-
... More
Supply and fixing of cable entry adapter box for Horizontal 8Way TPN DBs including all accessories as required complete
4
-
-
... More
Supply and fixing of cable entry adapter box for Horizontal 6Way TPN DBs including all accessories as required complete
6
-
-
... More
Supply of cable entry adapter box for Vertical, TPN DBs including all accessories as required complete
5
-
-
... More
Supply of cable entry adapter box for Vertical, TPN DBs with MCCB as incomer including all accessories as required complete
2
-
-
... More
Supply and fixing of pre galvanised three compartment raceways of 38MM X 300MM.IP20-IK 08,pregalvanised sheet with thickness 1.6MM and consist of cover and body,cover fitted onto the body with screws including accessories like couplers, clamp etc required for fixing the raceways as per EN 60-670 AND EN 50085-2-2.
100
-
-
... More
Supply of height adjustable 300X300X60-75MM junction box with base and cover plate for direct acess to cables at the inter section of raceways.
100
-
-
... More
PART- I- LIGHT FIXTURES AND FANS
-
-
-
... More
Supply of LED Battern in 20 W +/- 2 W, 2200 lm, 4ft aluminum housing fitted with polycarbonate diffuser to provides smooth light distribution. The luminaire shall have a rated system lifetime of 50,000 burning hours at L70. The luminaire must have a CRI 80, CCT-6500K, system efficacy 110 lm/W, THD10%, driver efficacy85%, surge protection 2.5 KV, LM 79 and LM80, power factor0.95,IP40 protection, Driver: constant current output driver, operating range 140 – 270V AC supply voltages.
14
-
-
... More
Supply of LED Battern in 40 W +/- 2 W, 4400 lm, 4ft aluminum housing fitted with polycarbonate diffuser to provides smooth light distribution. The luminaire shall have a rated system lifetime of 50,000 burning hours at L70. The luminaire must have a CRI 80, CCT-6500K, system efficacy 110 lm/W, THD10%, driver efficacy85%, surge protection 2.5 KV, LM 79 and LM80, power factor0.95,IP40 protection, Driver: constant current output driver, operating range 140 – 270V AC supply voltages.
26
-
-
... More
Supply of LED Battern in 10 W +/- 2 W, 1100 lm, 4ft aluminum housing fitted with polycarbonate diffuser to provides smooth light distribution. The luminaire shall have a rated system lifetime of 50,000 burning hours at L70. The luminaire must have a CRI 80, CCT-6500K, system efficacy 110 lm/W, THD10%, driver efficacy85%, surge protection 2.5 KV, LM 79 and LM80, power factor0.95,IP40 protection, Driver: constant current output driver, operating range 140 – 270V AC supply voltages.
6
-
-
... More
Supply of recessed mounted 2X2 LED panel ,made of CRCA housing with high efficiency PS Diffuser. LED Used shall be SMD type and fixture should have minimum efficacy at System level =120 lumens/watt with Minimum system Lumens 3600 & Max System wattage of 36 +/- 2 W, Life of fixture : 50000 burning Hrs. @ L70B50 Lumen maintenance,CCT-4000K/5700K/6500K, (SDCM=5), CRI Ra =80, THD10%, PF 0.95, LM 79 and LM80 an operating Voltage Range of 140 - 270 VAC.Minimum Internal Surge Protection 4.0KV & IP20/IK02 protection.
11
-
-
... More
Supply of Recessed LED downlighter made up of pressure die cast aluminum housing with high efficiency PS diffuser, LED Used shall be SMD type and fixture should have minimum efficacy at System level =110 lumens/watt with Minimum system Lumens 1000 & max wattage 9W +/- 2W, Life of fixture : 50000 burning Hrs. @ L70B50 Lumen maintenance, CCT of 6500K (SDCM=5), CRI Ra =80, PF 0.9, LM 79 and LM80, an Operating working temp range - 0°C Ta 45°C & operating Voltage Range of 130-320 V AC. Minimum Internal Surge Protection 2.5KV.
18
-
-
... More
Supply of Clean room 2X2 LED panel ,made of CRCA housing with high efficiency PS Diffuser. LED Used shall be SMD type and fixture should have minimum efficacy at System level =120 lumens/watt with Minimum system Lumens 3600 & Max System wattage of 36 +/- 2 W, Life of fixture : 50000 burning Hrs. @ L70B50 Lumen maintenance,CCT-4000K/5700K/6500K, (SDCM=5), CRI Ra =80, THD10%, PF 0.95, LM 79 and LM80 an operating Voltage Range of 140 - 270 VAC.Minimum Internal Surge Protection 4.0KV & IP20/IK02 protection.
4
-
-
... More
Supply of 18W +/- 2W Recessed LED downlighter made up of pressure die cast aluminum housing with high efficiency PS diffuser, LED Used shall be SMD type and fixture should have minimum efficacy at System level =110 lumens/watt with Minimum system Lumens 2000 & max wattage 18W, Life of fixture : 50000 burning Hrs. @ L70B50 Lumen maintenance, CCT of 6500K (SDCM=5), CRI Ra =80, PF 0.9, an Operating working temp range - 0°C Ta 45°C & operating Voltage Range of 130-320 V AC. Minimum Internal Surge Protection 2.5KV, LM 79 and LM80.
50
-
-
... More
Supply of LED Highbay luminaire with a housing of High Pressure Die casted Aluminium and polycarbonate front cover. The luminaire should have a color consistency SDCM 5, CRI 70 and CCT of 5700K. The luminaire shall be compliant with IP65 classification and impact protection of IK08 to ensure durablility. Luminaire must be 15000 lumens, system efficacy of atleast 155 lumen/watt and maximum system wattage of 40 +/- 5 W.The lumainaire shall have both Wide beam(90°) options available to provide flexbility in applications.The luminaire shall be designed so as to ensure lumen depreciation of up to 70% over 50k burning hours @ design ambient temp 45 deg C. The luminaire shall be designed for operations under diverse environment from -10 deg C to 50 deg C.The electronic driver used shall have a power factor 0.95, efficiency 90% and THD 10% with a minimum inbuilt surge protection of 6kV, ripple10% and suitable for an operationg voltage range of 120-270V AC, LM 79 and LM80.
14
-
-
... More
Supply of LED Highbay luminaire with a housing of High Pressure Die casted Aluminium and polycarbonate front cover. The luminaire should have a color consistency SDCM 5, CRI 70 and CCT of 5700K. The luminaire shall be compliant with IP65 classification and impact protection of IK08 to ensure durablility. Luminaire must be 15000 lumens, system efficacy of atleast 155 lumen/watt and maximum system wattage of 80 +/- 5 W.The lumainaire shall have both Wide beam(90°) options available to provide flexbility in applications.The luminaire shall be designed so as to ensure lumen depreciation of up to 70% over 50k burning hours @ design ambient temp 45 deg C. The luminaire shall be designed for operations under diverse environment from -10 deg C to 50 deg C.The electronic driver used shall have a power factor 0.95, efficiency 90% and THD 10% with a minimum inbuilt surge protection of 6kV, ripple10% and suitable for an operationg voltage range of 120-270V AC, LM 79 and LM80.
27
-
-
... More
Supplying and erecting integrated LED street light fitting 35 to 55W IP65 & IK08 class having single piece pressure die-cast aluminium housing, having system lumens output of Min. 4400 Lumens, min. efficacy of 110 lumen/W, CRI70, CCT upto 6500K,THD10%, p.f. 0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete with 3 Years warranty as per specification No FG-ODF/FLS2.
11
-
-
... More
Supplying and erecting street light Wall bracket made from 40 mm. dia 'B‘ class G.I. pipe 1.2 m in total length complete as per specification no. FG-BKT/WB
11
-
-
... More
Supply of LED Floodlight luminaire with a housing of High Pressure Die casted Aluminium and polycarbonate front cover. The luminaire should have a color consistency SDCM 5, CRI 70 and CCT of 5700K. The luminaire shall be compliant with IP65 classification and impact protection of IK08 to ensure durablility. Luminaire must be having a system lumen output of 10000 lumens with a system efficacy of atleast 155 lumen/watt and maximum system wattage of 100 +/- 5W.The lumainaire shall be of Wide beam(90°) available to provide flexbility in applications.The luminaire shall be designed so as to ensure lumen depreciation of up to 70% over 50k burning hours @ design ambient temp 45 deg C. The luminaire shall be designed for operations under diverse environment from -10 deg C to 50 deg C.The electronic driver used shall have a power factor 0.95, efficiency 90% and THD 10% with a minimum inbuilt surge protection of 6kV, ripple10% and suitable for an operationg voltage range of 120-270V AC. LM 79 and LM80
6
-
-
... More
Supplying and erecting exhaust fan medium duty 230 V A.C. 50 cycles 225 mm. 1400 RPM with condenser complete erected in position with necessary materials. Fan motor with moisture proof treatment and E‘ class insulation
14
-
-
... More
Supply & Installation of 1200 mm sweep. 5 star rated, Brushless Direct Current (BLDC) motor type ceiling fan, with double ball bearing, Aluminium pressure die cast body with Aluminium blades, canopies, hanging shackle, upto 1 m length down rod (as per site condition)and with remote control suitable for 240V 50 HZ, AC supply confirms to IS 374 amended up to date as required complete.. The fan shall have speed of 380 RPM with minimum air delivery of 220 cubic meters/minute
11
-
-
... More
Supplying and erecting fresh air cum exhaust fan of light duty 250 V A.C. 50 cycles 225mm. 1400 RPM rust proof body & blades, wire mesh, duly erected in an approved manner.
3
-
-
... More
ITC LIGHT FITTINGS AND FANS: Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.
46
-
-
... More
Installation, testing and commissioning of LED down lighter fittings on false ceiling with all mounting accessories as required complete including interconnections using 3 runs of 1.5 sqmm FRLS PVC insulated stranded copper conductor as required.
68
-
-
... More
Installation, testing and commissioning of LED fittings with chain and copper wiring - of all types LEDs complete with all accessories,driver etc. on false ceiling including supplying and fixing of GI chain and hook arrangement, upto 2*2m length, and wiring using 3 runs of 1.5 sqmm FRLS PVC insulated stranded copper conductor cable as required.
15
-
-
... More
Supplying and fixing extra conduit down rod of G.I. pipe 11 - 15 mm dia, heavy gauge including painting etc. as
required for hanging industrial battens.
11
-
-
... More
Installation, testing and commissioning of High bay/LED/ FLOOD type fittings on wall/Column/truss/false ceiling using suitable MS clamps, nuts, bolts/ 20mm heavy duty GI chain/ pipe (upto 50cm)etc including connections with 3C 1.5 Sq.mm PVC insulated flexible copper conductor cable as required.
47
-
-
... More
PART -J-EARTHING AND SAFETY EQUIPMENTS
-
-
-
... More
Providing earthing with copper earth plate size 60 x 60 x 0.315 cm with funnel with a wire mesh for watering and brick masonry block C.l. cover with minimum 25 kg Carbon based environment friendly back fill Ground Enhancing compound complete with all materials, testing & recording the results as per specification no ESE -LA
30
-
-
... More
Supply, Installation, Testing and commissioning of maintenance free earthing comprising of Electrode of 17.2 mm diameter Low Carbon Steel with 250 micron molecular copper bonded earthing rod of Length 3m along with 25 kg Carbon based environment friendly back fill ground enhancing compound required to fill up the excavated earth with required quantity complete. Specification no. EA-MOBI
13
-
-
... More
Supplying and erecting copper strip of required size used for earthing on wall and/or any other purpose with necessary copper clamps fixed on wall painted with bituminous paint in an approved manner with joints required. As per specification no. EA-EP.
1598
-
-
... More
Supplying and erecting Annealed bare copper wire of high purity of different sizes used for earthing on wall with necessary copper clamps fixed on wall/cable/conduit with screws in an approved manner.
761
-
-
... More
Providing printed instruction chart for treating persons suffering from electric shock, printed in English & Marathi and duly laminated complete.
3
-
-
... More
Providing pair of duly tested rubber hand gloves as per IS :47705 suitable for working upto 22 kV supply complete.
3
-
-
... More
Providing Floor mounting stand for keeping 4 Nos. of FIRE buckets 1500mm in length, 900mm in height frame made out of 30x30x4 mm angle iron with cross supports for legs, welded with 4 hooks and duly painted with one coat of red lead and two coats of silver paint complete.
3
-
-
... More
Providing Round bottom fire bucket of 9 Litres capacity as per IS : 2546 made out of 24 gauge G.I. sheet with extra handle at bottom duly painted white inside and red outside with FIRE Mark, on provided stand/ wall hook complete.
3
-
-
... More
Supplying standard first aid box with necessary antiseptic cream, medicine for use on wounds due burn, crepe bandage, gauge bandage, medicated ready to use bandage (Band-Aid) adhesive tape for medicinal use, scissors, anti-septic solution, etc. (All above contents shall be of standard makes)
3
-
-
... More
Supplying and fixing PVC synthetic elastomer electrically insulating mat with class A insulation conforming to IS: 15652 – 2006 & CPRI tested having 2 mm thickness upto 3.3 kV
2
-
-
... More
Supplying and fixing PVC synthetic elastomer electrically insulating mat with class B insulation conforming to IS: 15652 – 2006 & CPRI tested having 2.5 mm thickness upto 11 kV
2
-
-
... More
Supply and fixing of single line diagram, schematic diagrams etc. of A0 size on suitable including lamination etc. as required complete on wall.
2
-
-
... More
Supply and fixing single line diagram, schematic diagrams etc. of A1 size including lamination etc. as required complete on wall.
2
-
-
... More
Providing and fixing H.T. danger notice plate of 250 mm X 200 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as per the I.E. specifications.
2
-
-
... More
Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as per the I.E. specifications.
2
-
-
... More
PART- K-LIGHTNING PROTECTION
-
-
-
... More
Supply and fixing of 8 mm Aluminum Round Conductor as horizontal air terminal for Sheet roof with the required mounting clamps , cross connectors , expansion piece and other<br>accessories required as per IEC 62305-3
380
-
-
... More
Supply and fixing of 8 mm Aluminum Round Conductor as down conductor with the required mounting clamps , cross connectors , expansion piece and other accessories required as per IEC 62305-3 <br>
140
-
-
... More
Providing and fixing of test joint suitable for hot dipped galvanized steel tape 32mm x 6mm and 8mm dia solid round aluminium conductor conforming to the<br>requirements according to (IS/IEC 62305) with all accessories complete as required.
9
-
-
... More
Providing and laying G.l. tape 32 mm X 6 mm from earth. electrode directly in ground as required.
240
-
-
... More
PART - L- LIGHTING MANAGEMENT SYSTEM
-
-
-
... More
Stand Alone PIR Multi-Sensor:
Supply Installation Testing and Commissioning of stand alone type PIR sensor with day light sensing facility and lux detection range of 5 to 2500 Lux having minimum area of detection of 7m radius at the height of 2.8 meter with an adjustable time delay range – 30sec – 30min. Test mode – 6sec with auto exit programming. The sensor shall be stand alone type and have the provision for wall mounting/ Ceiling mounting facility as per the site requirement. Refer technical specification for more detailes.
6
-
-
... More
PART -M- EXTERNAL LIGHTING
-
-
-
... More
Supplying & erecting street light control panel in powder coated CRCA 14/16 SWG sheet, outdoor type, three phase, 415V consisted of suitable rating contactor, 24 hrs digital/ astronomical time switch with minimum 5 years battery backup, TPN MCB 63 A auto/manual selector switch, ON/OFF push buttons, indicator lamps, control wiring, metering device, etc for automatic operation & overcurrent, short circuit, earth fault protection of street lights upto the max load of 12 kW on provided iron frame / CC foundation complete.
2
-
-
... More
Providing & erecting 7 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 130 mm A/F, top 70 mm A/F on provided foundation as per specification no. OH-PL/OPL (single Arm)
30
-
-
... More
Providing & erecting 7 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 200 mm A/F, top 100 mm A/F on provided foundation as per specification no. OH-PL/OPL (Double Arm)
2
-
-
... More
Supplying and erecting integrated LED street light fitting 60W IP65 & IK08 class having single piece pressure die-cast aluminium housing, having system lumens output of Min. 6600 Lumens, min. efficacy of 110 lumen/W, CRI70, CCT upto 6500K, THD10%, p.f. 0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete with 3 Years warranty as per specification No FG-ODF/FLS2.
34
-
-
... More
PART - N- APRON FLOOD LIGHTING
-
-
-
... More
Supply of high-quality integrated LED Asymmetric Flood Light with a minimum system lumen of 39,000 Lm and system wattage not exceeding 300W +/-5W with a nominal efficiency 130 lumen/watt, CCT of 5700K with SDCM of 5 and CRI : 70. The peak intensity of the throw of light output for the asymmetric flood light fixture must be greater than 40 degree when the fixture is placed facing the ground at 0 degree vertical tilt. The housing should be of non-corrosive high-pressure die-cast aluminum to with stand extreme environments. It should have corrosion resistant powder coating to pass NSS of 500 Hrs. with PF 0.95. Lifetime of 75K burning hours @L70. Product should be suitable for continuous operation (10-12 Hrs. per day). The Ingress protection should be minimum IP 66 with an IK rating of 08. Optical and control gear compartments shall be maintainable/replaceable without impacting the LED units. The access to the optical and the gear compartment should be separate. While accessing the gear compartment, the optical compartment should not be accessible. The Luminaire should have a 20 KV /10 KA SPD duly bolted in the luminaire. The SPD should be able to sustain a minimum 15 hits of 10KA rating i.e. Total of 45 hits across all the three modes as per IEEE 62.41.2. The Luminaire should have a breather to ensure that air balance inside and outside of the compartment. The luminaire should be of Class B Serviceability. The wattage of each LED should be greater than 1 watt and less than 3 Watt. Only high power Single white LED chip with ceramic based suitable for outdoor use is allowed. Multi Chip , array multi die , mid power ,Integrated arrays and COB’s are not permitted. The luminaire should be capable of withstanding voltage stress of 440V for 8 Hrs. The Drivers should be a potted driver not a printed circuit board without casing, mounted inside the luminaire. (Test Reports for the above credentials shall be submitted). (Make:Philips BVP485 LED383 CW AWB A1 PSU GR SPD or equivalent approved make)
12
-
-
... More
Installation, testing and commissioning of LED Flood light luminaire of IP66 protected, pressure die cast aluminium housing body with optimal heat sink, with system wattage of minimum 300 W with rated life of L70 @ 50,000 hours, CRI greater than or equal to 70 & with system lumens grater than or equal to than 50000 and system efficiency greater than or equal to 130 lumen/watt.The Light fitting shall be with all required accessories suitable for mounting in (48-60)mm. The luminaire should meet all the technical specifications as mentioned. (Make:Philips BVP485 LED383 CW AWB A1 PSU GR SPD or equivalent approved make)
12
-
-
... More
Design & Supply of 30m height high Mast lighting system with accessories. Mast shaft shall be in 3 section , hot dip galvanized having top dia minimum 150 mm,bottom dia and plate thickness as per the structural requirement and suitable for wind velocity as per IS 875 part 3.It shall also include accessories for high mast including head frame ,stainless steel wire rope of minimum dia 6 mm , lightning arrestor, 2nos Earthing with C.I. earth pipe 3 metre long, 100 mm dia including connection to High mast earth terminal with 25 X 6 mm GI flats with accessories, and providing masonry enclosure with heavy duty CI cover plate of 300X300mm having locking arrangement and watering pipe etc. with 64kg charcoal/ coke and 5kg salt as required. (As per IS 3043 amended up-to-date) There shall be a control panel housing suitable rating switchgear, separate Contactors & timers for LED lamp circuit, 24 hrs Digital Timer with inbuilt battery and control circuit at the bottom of the mast with suitable provision for incoming and outgoing cable termination. Flexible copper trailing cable of minimum 8 core 4 sq.mm shall be provided from bottom to top. This cable shall be terminated at a galvanized junction box at the top. From this junction box to the luminaires minimum 3 core 2.5 sq mm flexible PVC cable through flexible conduit shall be used, double drum motorised winch,galvanised Lantern carriage arrangement suitable for 4 nos of 300W (:Philips BVP485 LED383 CW AWB A1 PSU GR SPD or equivalent approved make) Luminairs as per design and its control gear boxes arranged as per design. High mast shall be provided with twin dome aviation obstruction lamps. Minimum galvanizing thickness of 85 microns should be maintained uniform through out the mast fore plate thickness of more than 5mm and 70 microns for less than 5mm. Supply of single gear double drum winch having capacity of minimum 750kg and operating speed of suitable rpm, 2 nos of 6mm 304 Wire rope with safety factor over 5,metal clad socket with cap and hooking arrangement for power tool should be provided inside with each mast, portable power tool having output speed of suitable rpm, torque limiter, operating handle for manual operation etc,Trailing cable having adequate current rating etc as required complete. From this junction box to the luminaires minimum 3 core 1.5 sq mm flexible PVC cable through flexible conduit shall be used, double drum winch,galvanised Lantern carriage arrangement suitable for required no of 1 X 400W HPSV/T (Bajaj BGENF 21 S or equivalent approved make), 2 X 400W HPSV/T (Bajaj BGENF 22R or equivalent approved make) Luminairs as per design and its control gear boxes ) arranged as per design. High mast shall be provided with twin dome aviation obstruction lamps. Minimum galvanizing thickness of 85 microns should be maintained uniform through out the mast fore plate thickness of more than 5mm and 70 microns for less than 5mm. Supply of single gear double drum winch having capacity of minimum 750kg and operating speed of suitable rpm, 2 nos of 6mm 304 Wire rope with safety factor over 5,metal clad socket with cap and hooking arrangement for power tool should be provided inside with each mast, portable power tool having output speed of suitable rpm, torque limiter, operating handle for manual operation etc,Trailing cable having adequate current rating etc as required complete.
3
-
-
... More
Installation, testing and commissioning of 30m height high Mast lighting system with all accessories including design and supply of all materials, LED type twin dome aviation obstruction lamps and casting of suitable shallow foundation with square footing using M-25 concrete for the mast considering the safe soil bearing capacity at site as 10 T/sq. mtr. at suitable depth, filling the basement of highmast foundation pit .Backfilling the excavated ground after casting the foundation, earthing and supply a set of steel foundation bolts manufactured from special steel along with nuts, washers anchor plates and templates for each masts. The erection of the masts should be done with the help of suitable equipment.
3
-
-
... More
Supply of 4C 35 sq mm 1.1 KV grade XLPE insulated, PVC sheathed, armoured Aluminium /copper conductor cable conforming to IS 7098 (Part 1) amended upto date.
650
-
-
... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade upto 35sq mm in the existing RCC/ HUME/ METAL pipe as required.
650
-
-
... More
PART O- TAXIWAY LIGHTING
-
-
-
... More
AGL Fittings
Design & Supply of elevated type LED Taxiway Edge light fitting for use as Taxiway lights suitable for operation at 2.8 Amps to 6.6 Amps series circuit supply current complete with suitable LEDs, Omni-directional Blue lens (glass), Lens clamping mechanism, breakable coupling, rings /gaskets, base plate with 06 nos. M-10 stainless steel bolts and including an integrated encapsulated suitable electronic converter with standard secondary lead etc. complete fitting confirming to latest ICAO standards /requirement as required.
45
-
-
... More
Supply Base plate for taxiway edge lights T300/3 in composite material with 2" gas, tapped sleeve, clamp for two-pole receptacle with M10 bolt for fixing.
45
-
-
... More
Taxiway Guidance Sign Boards
Supply of internal illuminated U V protected guidance sign boards of 210cm length and 60cm height,with aluminium housing,complete with LED lamp lighting to ensure even light distribution over the entire polycarbonate panel, including secondary leads of 1.5 meter and secondary conector conforming to FAA specification, suitable number of columns for proper support and mounting, base plate, frangible couplings, clamps ,lamps with holder. The size of inscriptions, spacing between the inscriptions colour of the letters, colour of the face of the board and the photometric performance of the board should confirm to ICAO recommendations as per aerodrome design manual part 4 chapter 11 and ICAO annex 14 chapter 5.4.The letter size, spacing and sign luminance should confirm to standards for CAT 2 operations mentioned in 1CAO annex 14 appendix 4.The lamps should be capable of working in 6.6amps series circuit and should have a life of 50000hrs
1
-
-
... More
Supply of internal illuminated U V protected guidance sign boards of 180cm length and 60cm height,with aluminium housing,complete with LED lamp lighting to ensure even light distribution over the entire polycarbonate panel, including secondary leads of 1.5 meter and secondary conector conforming to FAA specification, suitable number of columns for proper support and mounting, base plate, frangible couplings, clamps ,lamps with holder. The size of inscriptions, spacing between the inscriptions colour of the letters, colour of the face of the board and the photometric performance of the board should confirm to ICAO recommendations as per aerodrome design manual part 4 chapter 11 and ICAO annex 14 chapter 5.4.The letter size, spacing and sign luminance should confirm to standards for CAT 2 operations mentioned in 1CAO annex 14 appendix 4.The lamps should be capable of working in 6.6amps series circuit and should have a life of 50000hrs
4
-
-
... More
Supply of internal illuminated U V protected guidance sign boards of 160cm length and 60cm height,with aluminium housing,complete with LED lamp lighting to ensure even light distribution over the entire polycarbonate panel, including secondary leads of 1.5 meter and secondary conector conforming to FAA specification, suitable number of columns for proper support and mounting, base plate, frangible couplings, clamps ,lamps with holder. The size of inscriptions, spacing between the inscriptions colour of the letters, colour of the face of the board and the photometric performance of the board should confirm to ICAO recommendations as per aerodrome design manual part 4 chapter 11 and ICAO annex 14 chapter 5.4.The letter size, spacing and sign luminance should confirm to standards for CAT 2 operations mentioned in 1CAO annex 14 appendix 4.The lamps should be capable of working in 6.6amps series circuit and should have a life of 50000hrs
2
-
-
... More
Supply of internal illuminated U V protected guidance sign boards of 60cm length and 60cm height,with aluminium housing,complete with LED lamp lighting to ensure even light distribution over the entire polycarbonate panel, including secondary leads of 1.5 meter and secondary conector conforming to FAA specification, suitable number of columns for proper support and mounting, base plate, frangible couplings, clamps ,lamps with holder. The size of inscriptions, spacing between the inscriptions colour of the letters, colour of the face of the board and the photometric performance of the board should confirm to ICAO recommendations as per aerodrome design manual part 4 chapter 11 and ICAO annex 14 chapter 5.4.The letter size, spacing and sign luminance should confirm to standards for CAT 2 operations mentioned in 1CAO annex 14 appendix 4.The lamps should be capable of working in 6.6amps series circuit and should have a life of 50000hrs
1
-
-
... More
Transformers and connectors
Supply of 45 W 6.6/6.6 amps, 5KV grade, 50c/s, series to series type isolating transformers encapsulated in polyester resin and moulded with neoprene rubber.The transformer should be suitable for connecting the LED Taxiway Edge lights.
45
-
-
... More
Supply of series to series type isolating transformers encapsulated in polyester resin and moulded with neoprene rubber .The transformer should be suitable for connecting the signage boards mentioned under Taxiway Guidance Sign Boards.
8
-
-
... More
Supply of plug and receptacles,suitable for 5KV grade ,6sqmm primary circuit of airfield lighting cables Conforming to FAA -813 specification.
45
-
-
... More
Supply of plug and receptacles,suitable for secondary circuit of airfield lighting cables Conforming to FAA -813 specification.
45
-
-
... More
Supply of 6 sqmm single core stranded Copper conductor unarmoured 5KV grade PVC insulated PVC sheathed airport lighting cable for unearthed system as specified and conforming to IS 1554 part II amended upto date.
1252
-
-
... More
Supply of Dual-core cable,suitable for using as secondary cable between 6.6/6.6 amps isolating transformer and airfield ground light fixtures in airfield lighting serie circuits 2x 4 mm², tinned copper conductor.
485
-
-
... More
Supplying, laying, jointing and hydrostatically testing ISI marked HDPE pipes of required dia conforming to as per IS 4984,1985 PE-100 including all fittings and specials such as tees, elbows, bends, reducers, end caps, saddles, plugs, coupling, MTA , all types of pipe supports etc. including cost of all jointing materials, bolts, nuts, rubber washers, ferrule, pipe supports, hire of tools, cost for conveyance of water for testing, etc. complete so as to withstand the internal design pressure of 10 kg/cm2 -for external works
485
-
-
... More
Installation of Edge Lights and Sign boards
Installation ,testing and commisioning of taxiway edge light fittings on the C.I. Shallow base complete with lamps,all connectors and making field connections with isolating transformers,lamps and esna connectors and cable etc as required
45
-
-
... More
Installation of sign boards on concrete base with anchor fasteners (sleeve bolt) of size 10mm, 3 each on each leg of the sign board and tightening of the same. The cost of installation of the boards on the platform will be measured in running meter considering the length of the board.
8
-
-
... More
Cast Iron Boxes
Supply of round type CI shallow box of size 330mm outer dia and 400mm height, 15mm thick at top and 10mm thick at other places, having a clear opening of 220 dia at top with 6nos taped holes of 260PCD and 3/8” x 6 cadmium plated threaded bolts with spring washer, with provision for cable entry of 60mm dia at side. The CI box should be painted with one coat of red oxide primer and two coats of black enamel paint, inside and outside as required.These base should be suitable for fixing the taxiway edge lights
50
-
-
... More
Supply of round type CI shallow box of size 330mm outer dia and 150mm height, 15mm thick at top and 10mm thick at other places, having a clear opening of 220 dia at top with 6nos taped holes of 260PCD and 3/8” x 6 cadmium plated threaded bolts with spring washer, with provision for cable entry of 60mm dia at side. The CI box should be painted with one coat of red oxide primer and two coats of black enamel paint, inside and outside as required.These base should be suitable for fixing the taxiway edge lights
50
-
-
... More
Installation of round type CI box transformer housing box of size 330mm outer dia and 400mm height with1:2:4 cement concrete all around in bittumen or in ground including cutting of bittumen.
50
-
-
... More
Installation of round type CI box of size 330mm outer dia and 150mm height with1:2:4 cement concrete all around in bittumen including cutting of bittumen
50
-
-
... More
Design of 4kW of FAA Type L-819 compliant Microprocessor based constant current regulators (CCRs) suitable for remote as well as local control operations with 5-position brightness control ( 6.6 A maximum current corresponding to 100% brightness) suitable for operation on input voltage of 230/415 V , 50Hz AC supply, provision for control supply with all switchgears,CCR protection, connections / inter-connections complete as required
2
-
-
... More
Installation, testing and commissioning 4kW of FAA Type L-819 compliant Microprocessor based constant current regulators (CCRs) suitable for remote as well as local control operations with 5-position brightness control ( 6.6 A maximum current corresponding to 100% brightness) suitable for operation on input voltage of 230/415 V , 50Hz AC supply, provision for control supply with all switchgears, CCR protection, connections / inter-connections complete as required.
2
-
-
... More
Cable Laying
Laying of max 2 Nos 6 sqmm/ 16 sqmm PVC insulated PVC sheathed copper conductor airport lighting cable of 5 KV grade in 50mm dia,6Kgm, PLB HDPE pipes laid direct in ground, including excavation, ,refilling the trench with sand etc. as required.The required quantity of HDPE pipe accessories like joints,connectors ,end caps etc is to be supplied by the contractor.The contractor should dispose the dug out earth to the location shown to them.
1252
-
-
... More
EARTHING Supplying & Laying 6 SWG GI Wire along with UG cable as required
1547
-
-
... More
Supply and installation of all the materials required for maintenance free earthing system including 3 mtrs length with minimum17.2mm dia or above 250 microns molecularly copper bonded steel rod with stainless steel connectors and fasteners for connecting earth strip, earth enhancing compound (12.5 kg mineral compound / 22.6 kg low resistivity graphite compound) and providing masonry enclosure with heavy duty CI cover plate of 300X300 mm having locking arrangement.
6
-
-
... More
DOCK LEVELLER
-
-
-
... More
Supply, fixing , testing and commissioning of electro hydraulic dock leveller comprising of platform with hinged lip made of profiled anti-slip steel, and hydraulic power pack suitable for carrying dynamic load of minimum 10 ton of the fork lift and the material to be carried including all accessories, electricals, controls, instruments, cabling, etc. to make the system complete in all respects as per technical specifications . The platform size of dock leveller shall be 2000mm (width) x 2500mm (length).
6
-
-
... More
PASSIVE NETWORKING COMPONENTS
Cable trays, Conduits, Pipes and Trunking
-
-
-
... More
Supply and installation of covered GI unperforated cable tray of following width, 50 mm depth X 1.6 mm thickness (ISI Grade) with thread road, anchor fastener, nut, washer and all accessories required at site to complete the work as per technical specification: 200mm
100
-
-
... More
Supplying and erecting HMS PVC conduit FRLS grade 25 mm dia. with necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC. (CSR 2022-23 Item no. 1.1.9)
200
-
-
... More
Supplying and erecting HMS PVC conduit FRLS grade 25 mm dia. with PVC accessories on wall /ceiling as per specification No: WG-MA/CON. (CSR 2022-23 Item no. 1.2.4)
1000
-
-
... More
Supplying and erecting PVC trunking (PVC casing-n-capping) of size 20 mm with accessories on wall/ceiling as per specification No: WG- MA/CON. (CSR 2022-23 Item no. 1.2.6)
50
-
-
... More
Supply, installation, testing and commissioning of 32mm HDPE Pipe, ISI marked, along with all accessories like socket, bend, couplers, etc., complete with fitting, cutting, jointing etc. direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required at site to complete the work as per technical specification
9900
-
-
... More
Supplying and erecting ISI mark GI pipe 50 mm dia.‘B’ class at position with accessories complete as per specification no. CW-PLB/GP. (CSR 2022-23 Item no. 16.5.6)
50
-
-
... More
Supply and installation of concealed GI metal back box with all accessories required at site to complete the work as per technical specification
33
-
-
... More
Supply and installation of PVC surface back box with all accessories required at site to complete the work as per technical specification
34
-
-
... More
Copper Cabling Components
-
-
-
... More
Supplying and installing enhanced cat-6 LSZH cable with 4-connector channel Performance test report as per ANSI/TIA-568.2-D suitable for networking complete as per specification. (CSR 2022-23 Item no. 1.10.4)
3400
-
-
... More
Supply, installation, testing and commissioning of U/UTP cable - Category 6A, 4 pair, 500 MHz, 23 AWG solid copper conductor, LSZH through existing conduits including termination, cable ties, ferrules and all accessoreis required at site to complete the work as per technical specification
1500
-
-
... More
Supplying and erecting modular type computer Jack RJ45 with safety shutter, duly erected on provided plate and box with wiring connections complete. (CSR 2022-23 Item no. 1.6.17)
62
-
-
... More
Supply, installation, testing and commissioning of Information Outlet - Category 6A, RJ-45, with all accessories required at site to complete the work as per technical specification
33
-
-
... More
Supply, installation, testing and commissioning of single or dual shuttered Faceplate with all accessories required at site to complete the work as per technical specification
67
-
-
... More
Supplying and fixing 1 m length, UTP patch cord of enhanced Cat 6 type with 4-connector channel, performance test report as per ANSI/TIA-568.2- D in position as per specification No. WG-COC/PC (CSR 2022-23 Item no. 1.10.17)
44
-
-
... More
Supplying and fixing 2 m UTP patch cord of cat 6 type in position as per specification No. WG-COC/PC (CSR 2022-23 Item no. 1.10.18)
70
-
-
... More
Supply, installation, testing and commissioning of Patch Cords, Category 6A - 1m, with all accessories required at site to complete the work as per technical specification
5
-
-
... More
Supply, installation, testing and commissioning of Patch Cords, Category 6A - 2m, with all accessories required at site to complete the work as per technical specification
25
-
-
... More
Supply, installation, testing and commissioning of 48 port Patch Panel, Category 6, fully loaded, with all accessories required at site to complete the work as per technical specification
1
-
-
... More
Supply, installation, testing and commissioning of 24 port Patch Panel, Category 6, fully loaded, with all accessories required at site to complete the work as per technical specification
1
-
-
... More
Supply, installation, testing and commissioning of 48 port Patch Panel, Category 6A, fully loaded, with all accessories required at site to complete the work as per technical specification
1
-
-
... More
Fiber Cabling Components
-
-
-
... More
Supplying and installing armoured single mode optical fibre cable 12 fiber, core dia 50/125μm. (OS1/OS2) 10/40 GBPS speed in provided underground HDPE pipe complete.
11250
-
-
... More
Supplying and fixing 24 ports light guide unloaded interconnect unit, rack mounted type, with adapter panel for termination of optical fibre cables in provided U rack complete as per specification no. WG-NAS/ LIU (CSR 2022-23 Item no. 1.12.7)
9
-
-
... More
Supplying and installing single mode simplex pigtail with SC/LC splicing complete. (CSR 2022-23 Item no. 1.10.27)
216
-
-
... More
Supplying and installing 3 m fibre patch cord duplex single mode for OS1/OS2 complete. (CSR 2022-23 Item no. 1.10.21)
20
-
-
... More
Racks
-
-
-
... More
Supplying and fixing 42 U floor mount server rack (Dimension-DxWxH – 800x1000x2070 mm) as per specification No. WG-NAS/RAK (CSR 2022- 23 Item no. 1.12.29)
1
-
-
... More
Supplying and fixing 15U wall mount rack (Dimension-DxWxH – 500x600x767 mm) as per specification No. WG-NAS/RAK (CSR 2022-23 Item no. 1.12.20)
1
-
-
... More
ACTIVE NETWORKING COMPONENTS
-
-
-
... More
Supply, installation, testing and commissioning of 48 port Stackable Enterprise switch with 48 x 10/100/1000Base-TX ports, 2 x 10G SFP+ ports and all accessories required at site to complete the work as per technical specification
1
-
-
... More
Supply, installation, testing and commissioning of 24 port Stackable Enterprise switch with 24 x 10/100/1000Base- PoE+ ports, 2 x 10G SFP+ ports and all accessories required at site to complete the work as per technical specification
2
-
-
... More
Supply, installation, testing and commissioning of 48 port Stackable Enterprise PoE+ switch with 48 x 10/100/1000Base-TX PoE+ ports, 2 x 1G SFP ports and all accessories required at site to complete the work as per technical specification
1
-
-
... More
Supply, installation, testing and commissioning of 12 port Stackable Enterprise PoE+ switch with 12 x 10/100/1000Base-TX PoE+ ports, 2 x 1G SFP ports and all accessories required at site to complete the work as per technical specification
1
-
-
... More
Supply, installation, testing and commissioning of 10G SFP+ Transceiver, single mode, with all accessories required at site to complete the work as per technical specification
8
-
-
... More
Supply, installation, testing and commissioning of 1G SFP Transceiver, single mode, with all accessories required at site to complete the work as per technical specification
8
-
-
... More
IP-EPABX SYSTEM
-
-
-
... More
Supply, installation, testing and commissioning of IP telephone licenses for Matrix Eternity LE system along with all accessories as required at site as per technical specifications.
30
-
-
... More
Supplying, installing, testing & commissioning IP telephone instrument as per specification complete. (CSR 2022-23 Item no. 1.9.30)
15
-
-
... More
CCTV SYSTEM
-
-
-
... More
Supply ,installation, testing and commissioning of 2MP IP Dome Camera, varifocal lens, IR distance - 30m, 25 fps, PoE, ONVIF compliant, H.265, IP66 rated including all accessories required at site to complete the work as per technical specification
15
-
-
... More
Supply ,installation, testing and commissioning of 2MP IP Bullet Camera, varifocal lens, IR distance - 50m, 25 fps, PoE, ONVIF compliant, H.265, IP66 rated including all accessories required at site to complete the work as per technical specification
16
-
-
... More
Supply, installation , testing and commissioning of 2MP PTZ Camera Outdoor, 25 fps, PoE, ONVIF compliant, H.265, IP66 rated including all accessories required at site to complete the work as per technical specification
3
-
-
... More
FIRE PROTECTION WORKS
-
-
-
... More
Supplying, installation, testing and commissioning of main fire pump (MFP /EP) suitable for water discharge of 2280 to 2850LPM at 80 to 60 m head driven by electric motor 415 volts, 3 phase 50 Hz, AC supply of 45kW or of suitable kW capacity for manual/automatic operation and consisting of following :
(a) Horizontal type, single stage, centrifugal/split casing pump of cast iron body & bronze impeller with stainless steel shaft(SS410 grade), mechanical seal conforming to IS 1520.
(b) Squirrel cage induction motor, TEFC, synchronous speed 3000 RPM, suitable for operation with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325.
(c) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required.
(d) Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper levelling complete pump set with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete, as per specification no. FF-MFP/SSC/EP
1
-
-
... More
Supplying, installation, testing and commissioning of jockey fire pump (JP) suitable for water discharge of 180 to 240 LPM at 90 to 70 m head driven by electric motor 415 volts, 3 phase 50 Hz, AC supply of 9.3 kW or of suitable kW capacity for manual/automatic operation and consisting of following :
(a) Horizontal/vertical type, multi stage, centrifugal casing pump of cast iron body & bronze impeller with stainless steel shaft(SS410 grade), mechanical seal conforming to IS 1520.
(b) Squirrel cage induction motor, TEFC, synchronous speed 3000 RPM, suitable for operation with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325.
(c) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required.
(d) Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper levelling complete pump set with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003)complete, as per specification no. FF-MFP/JP
1
-
-
... More
Supplying, installation, testing and commissioning of booster fire pump [BP] suitable for water discharge of 450 LPM at 35 m head driven by electric motor 415 volts, 3 phase 50 Hz, AC supply of 5.5 kW or of suitable kW capacity for manual/automatic operation and consisting of following :
(a) Horizontal/vertical type, single/multi stage, centrifugal casing pump of cast iron body & bronze/CI impeller with stainless steel shaft (SS410 grade), mechanical seal conforming to IS 1520.
(b) Squirrel cage induction motor, TEFC, synchronous speed 3000 RPM, suitable for operation with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325.
(c) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required.
(d) Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper levelling complete pump set with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete, as per specification no. FF-MFP/BP
1
-
-
... More
Supplying, installation, testing and commissioning of main fire pump (MFP/DP) suitable for water discharge of 2280 to 2850 LPM at 90 to 60 m head driven by 76 HP or suitable HP capacity diesel engine at required working speed suitable for manual/automatic operation and consisting of following :
(a) Horizontal type, single stage, centrifugal casing pump of cast iron body & bronze impeller with stainless steel shaft(SS410 grade), mechanical seal conforming to IS 1520.
(b) Water cooled with radiator, diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12/24 volts DC electric starting equipment with battery of required AH capacity with necessary charger suitable to work on 230v, 50Hz AC supply, diesel tank of minimum 150ltr capacity with first filling of diesel up to 100% level with necessary piping with valves up to engine , exhaust pipe extended up to 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications etc. as required.
(c) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required.
(d) Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper levelling complete pump set with engine assembly and accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete, as per specification no. FF-MFP/SSC/DP
1
-
-
... More
Supplying and erecting 300 mm dia 1.5m in height air vessel / tank fabricated from min 5mm thick M.S. sheet complete as per specification no.FF-FFA/ACT
1
-
-
... More
Supplying and erecting 100 mm dia. pressure gauge , 0-300 PSI or 0-14 kg per cm square fitted with 12/15 mm dia. pad cock valve, erected with provided G.I. pipe, elbow etc. complete as per specification no. FF-FFA/PG
7
-
-
... More
Supplying and erecting 12/15 mm dia pressure switch with provided isolation valve, G.I. nipple, elbow, etc complete as per specification no. FF-FFA/PS
4
-
-
... More
Supplying and erecting G.I. pipe ‘C’ class ERW 150 mm dia with necessary fittings complete as per specification no. FF-PP
762
-
-
... More
Supplying and erecting G.I. pipe ‘C’ class ERW 100 mm dia with necessary fittings complete as per specification no. FF-PP
255
-
-
... More
Supplying and erecting G.I. pipe ‘C’ class ERW 75/80 mm dia with necessary fittings complete as per specification no. FF-PP
32
-
-
... More
Supplying and erecting G.I. pipe ‘C’ class ERW 65 mm dia with necessary fittings complete as per specification no. FF-PP
31
-
-
... More
Supplying and erecting G.I. pipe ‘C’ class ERW 50 mm dia with necessary fittings complete as per specification no. FF-PP
251
-
-
... More
Supplying and erecting G.I. pipe ‘C’ class ERW 25 mm dia with necessary fittings complete as per specification no. FF-PP
300
-
-
... More
Providing coating of bitumen paint & 4mm thick wrapping for underground 150 mm ring main of fire fighting system.
170
-
-
... More
Making trench in soft soil having 0.9m depth and minimum 0.3 m width as per IS for laying provided cables of voltage range 3.3 kV to 11 kV/ GI pipe for firefighting, complete as per specification No. CW-EXN-CTR
170
-
-
... More
Supplying and erecting 150 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, as per specification no. FF-VL/BFV
17
-
-
... More
Supplying and erecting 100 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, as per specification no. FF-VL/BFV
8
-
-
... More
Supplying and erecting 75/80 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, as per specification no. FF-VL/BFV
2
-
-
... More
Supplying and erecting 50 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, as per specification no. FF-VL/BFV
4
-
-
... More
Supplying and erecting 75/80 mm dia Cast Iron end line strainer of Y-type flanged end pattern, PN16 pressure rating, SS screen, end connection with Flanged / Screwed / Socket Weld / Butt Weld End etc with standard OAR (open area Ratio) for positive suction complete as per specification no. FF-VL/ELS
1
-
-
... More
Supplying and erecting 100 mm dia Cast Iron end line strainer of Y-type flanged end pattern, PN16 pressure rating, SS screen, end connection with Flanged / Screwed / Socket Weld / Butt Weld End etc with standard OAR (open area Ratio) for positive suction complete as per specification no. FF-VL/ELS
1
-
-
... More
Supplying and erecting 150 mm dia Cast Iron end line strainer of Y-type flanged end pattern, PN16 pressure rating, SS screen, end connection with Flanged / Screwed / Socket Weld / Butt Weld End etc with standard OAR (open area Ratio) for positive suction complete as per specification no. FF-VL/ELS
2
-
-
... More
Supply , installation , testing and commissioning of 150mm dia EPDM Rubber Flexible connectors (Flexible Coupling) for pump suction and delivery complete in all respects as per the technical specifications.
4
-
-
... More
Supply , installation , testing and commissioning of 80mm dia EPDM Rubber Flexible connectors (Flexible Coupling) for pump suction and delivery complete in all respects as per the technical specifications.
2
-
-
... More
Supplying and erecting 75/80 mm dia cast iron double flange NRV complete with PN16 pressure rating, as per specification no. FF-VL/NRV
1
-
-
... More
Supplying and erecting 100 mm dia cast iron double flange NRV complete with PN16 pressure rating, as per specification no. FF-VL/NRV
1
-
-
... More
Supplying and erecting 150 mm dia cast iron double flange NRV complete with PN16 pressure rating, as per specification no. FF-VL/NRV
2
-
-
... More
Supplying and erecting 20 mm dia gun metal gate valve complete with PN16 pressure rating, as per specification no. FF-VL/GV
4
-
-
... More
Supplying and erecting stainless steel single outlet hydrant valve fitted with necessary accessories complete as per specification no. FF-VL/HV
14
-
-
... More
Supplying and installing wall mounting swinging hose reel drum fitted with 19mm dia. 30m long high pressure polypropylene (Polyhose) along with necessary accessories complete as per specification no. FF-FFA/HV
4
-
-
... More
Supplying and erecting 63mm dia, reinforced rubber lined (R.R.L.) hose pipe, 15m in length, fitted with necessary accessories complete as per specification no. FF-FFA/RRL
28
-
-
... More
Supplying and erecting stainless steel branch pipe 63 mm dia fitted with 20mm dia detachable hexagonal nozzle complete as per specifications no. FFFFA/ NZ
14
-
-
... More
Supplying and erecting fire brigade header ( Siamese connection )of 150 mm dia, for supplying water in fire tank complete as per specification no. FFFA/FMC
3
-
-
... More
Supplying and erecting 20/25mm dia gun metal air release cock, with necessary G.I. coupling to be fitted on top of air vessel or on wet riser complete as per specification no. FF-FFA/ARV
4
-
-
... More
Supplying and erecting M.S./CRCA cabinet for housing single hydrant valve of size ( 400 x 400 x 400)mm or hose pipe box of size ( 600 x 600 x 200)mm made from min. 1.5 mm thick CRCA sheet with angle iron work of min. of size (25 x 25 x 4) mm having front doors with viewing glass of size (200x150) mm and locking arrangement with necessary fixing material such as rubber bidding etc. duly painted in post box red colour( Code 538 of IS 5)
14
-
-
... More
Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type pendant sprinklers of rating 68 degree centigrade with required accessories
118
-
-
... More
Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type upright sprinklers of rating 68 degree centigrade with required accessories
39
-
-
... More
Providing, fixing, testing & commissioning of ESFR sprinklers of K22 with required accessories
45
-
-
... More
Providing & fixing flow switch in 100mm dia M.S. pipe including connection etc as required.
4
-
-
... More
Providing, fixing, testing & commissioning of installation control valve of cast iron body, brass/bronze working parts comprising of water motor alarm, bronze seat clapper, clapper arm and hydraulically driven mechanical gong bell to sound continuous alarm when the wet riser/sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch, cock valve complete with drain valve and bypass, test control box, ball valves, MS pipe of required size, flanges, orifice plate, gasket etc of 150mm dia as required.
1
-
-
... More
Supplying, installation, testing & commissioning of sprinkler flexible pipe (UL Listed) of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, center bracket, stockbar of 700mm length complete as required.
163
-
-
... More
Supplying, installation, testing & commissioning of 100mm dia deluge valve (to be used for water curtains) UL listed with wet pilot basic trim assembly for DVA with test and alarm, drip and drain valve with water motor gong complete as required.
1
-
-
... More
Providing, installation, testing & commissioning of electric release trim assembly for deluge wall with two way solelnoid valve, weather proof operation on 24 volts DC supply complete as required
1
-
-
... More
Providing, installation, testing & commissioning of water curtain nozzle 15mm dia nickel chrome plated brass, BSPT, K-factor as per design consideration complete as required.
9
-
-
... More
Supplying & erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kg. capacity cartridge type conform to IS 2878 /15683 complete erected with necessary clamp made from 50 x 6 mm. M. S. flat with nut & bolts routed in wall complete.
4
-
-
... More
Supply and installation of ISI marked ABC Stored pressure type Fire Extinguisher 6 Kgs Capacity Mono Ammonium Phosphate based Dry Chemical Powder for Fighting ABC Class of Fire, stored Pressure type of Mild steel body pressurized by Nitrogen Gas. The Extinguisher shall conform to IS:15683, have pressure gauge for indicating inside pressure with opening and closing lever of squeeze grip type with tamper proof seal abd wall bracket complete in all respect as per technical specification.
19
-
-
... More
Supplying, installing, testing and commissioning of addressable optical smoke detector, single/twin LED’s with 360 degree view, suitable for low voltage 15 to 32 V DC two wires supply, in-built locking mechanism to check the removal and pilferage of the detector, in built isolation mode, start up current 300μA and alarm condition current shall be maximum 6.5 mA, operating temperature 0°C to 50°C, humidity 0-95% RH, IP 41, conforming to IS 2189: 2008, 11360_1985_Reff2020 EN 54 or UL Approved with 3 years equipment replacement warranty FFAFAS/SD
90
-
-
... More
Supplying, erecting testing and commissioning beam smoke detector four wire single ended reflected type with 8 " receiver having digital display for easy alignment, adjustable sensitivity & heater kit for transmitter/receiver and reflector with necessary connections on suitable back box. The protection range of beam detector is 5 to 70 m.
2
-
-
... More
Supplying, installing, testing and commissioning of addressable manual call points ( break glass type/pull station type), made of addressable break glass plastic square in shape surface/flush mounted with "Break Glass" massage embedded on the glass, complete erected with mounting base and required accessories conforming to EN 54 or UL listed with 3 years equipment replacement warranty FF-AFAS/MCP
6
-
-
... More
Supplying, installing, testing and commissioning of addressable horn cum strobe sound/ hooter, output frequency 500 to 1000 Hz with dB as per Chart given in IS 15908:2021, with flashing at 1 Hz over the strobe’s entire operating voltage range EN 54, conforming to IS 2189: 2008, IS 15908:2021 standards with 3 years equipment replacement warranty FF-AFAS/SSH.
6
-
-
... More
Supplying, installing, testing and commissioning of addressable fire control/relay module complete as required, with 3 years equipment replacement warranty conforming to IS 5051Part 2 (Sec 1 to 3) : 1982 reed relays, EN 54 or UL Listed FF-AFAS/CRM
1
-
-
... More
Supplying, installing, testing and commissioning of addressable fire monitor module complete as required. EN 54 or UL Listed with 3 years equipment replacement warranty conforming to IS 5051Part 2 (Sec 1 to 3) : 1982 Reed relays FF-AFAS/MM
6
-
-
... More
Supplying, installing, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the 1 loop capacity and capable of supporting upto 250 devices and detectors per loop, with on-board LCD display with min 16 lines of text, operating at 230 V 50 HZ - AC with inbuilt Battery Backup of a minimum 24 hours in normal condition and 30 min in alarm condition, suitable provision for network connectivity, interfacing with third party equipment via a MODBUS/ OPC/ L-ON interface etc. conforming to IS 15908:2021, IS 2189: 2008, EN 54 & VDS / FM/ UL 864 (10th edition) with 3 years replacement warranty FF-AFAS/CP.
1
-
-
... More
Supplying, installing, testing and commissioning FR, XLPE armoured cable 2 core 1.5 sq.mm. copper conductor complete erected on wall/ ceiling complete as per specification no. CB-LT/CU
2740
-
-
... More
Supply and installation of glow signage (photoluminescent)of "3M" Make such as Fire duct/ Staircase/ Exit/ Emergency exit signage etc. of standard size (500*200 MM) as per conventional design/ colour code on 4 mm thick foam sheet. The signage shall be either fixed on the wall with the help of screws/double tape or hanged from the false ceiling with the help of chain & screws etc.complete in all respect as per technical specification
16
-
-
... More
DX-TYPE AIR CONDITIONING EQUIPMENTS & PIPING
-
-
-
... More
Supply, Installation, Testing and Commissioning of Double skin, sheet metal Weather Proof (Outdoor) AIR-HANDLING UNIT with suitable rated VFD ,starter panel of the following minimum capacity complete with factory fabricated mixing box, outlet volume control dampers, canvas connections, UVGI module , UV-C should be of 254 nm wavelength and no ozone shall be produced as a by-product, calculated lamp watts per square foot of coil shall demonstrate greater than 12 watts per square foot of coil, consistent with ASHRAE Chapter 60, Filter section shall have MERV-8 and MERV-14 filters placed in downstream, complying to ASHRAE 52.2, DX cooling coil of copper tube with AHU kit(Necessary Expansion kit, control module kit shall be provided for VRF compatibility) for VRF system , aluminium fin construction, squirrel cage, TEFC, IE 3 ,3-Ph induction motor, SS Drain Pan, DIDW centrifugal fan, drive package and cushy-foot mounting, control wiring for actuators, all housed inside housing of a double skin construction of minimum 40mm mm thick,thermo break profile, AHU with vibration isolation arrangement ,Limit switch in door and inspection lamps to be fixed ,power/control cabling from power supply, starter panel to AHU, suitable control panel associated control wiring. The item shall be complete in all respects complying to technical specifications.
(Note: R.C.C foundation along with PCC/RCC sub base shall be considered)
-
-
-
... More
20TR (8000 CFM) - 30 mm of WG ESP
3
-
-
... More
15TR (6000 CFM) - 30 mm of WG ESP
1
-
-
... More
Supply, Installation ,testing and commissioning of following minimum capacity Air-cooled VRF (Variable Refrigerant Flow) /VRV Outdoor unit with multiple compressors of variable speed inverter driven with suitable capacity drive motors conforming to IE3 as per IS 12615, air cooled condenser suitable for 3 phase, 415 V, 50Hz supply, R410A/R407C refrigerant, oil separator, with all accessories, and safety devices like thermal protector, pressure relief valve, high-low pressure cut off, suitable interconnecting control cabling between IDUs , ODUs ,vibration isolator for Outdoor unit and GI mounting stand shall be included as part of equipment line item etc . Minimum Energy Efficiency of the equipment shall meet stringent of ASHRAE 90.1 and ECBC latest standards (whichever is superior). The item shall be complete in all respects complying to technical specifications. (Note: 1.Cost of equipment should be inclusive of necessary hardware /software gateway interface
controllers etc.)
-
-
-
... More
8 HP
2
-
-
... More
20 HP
1
-
-
... More
26 HP
3
-
-
... More
Supply, Installation ,testing and commissioning of indoor evaporative units Hiwall unit type of 1TR minimum capacity compatible with VRF system including cordless remote, suitable for operation single phase, 230 V, 50Hz supply, including fixing of room unit, with high lift drain pump, drain connection with U-trap and all necessary fittings, elbows, electrical cabling from power plug, structural supports etc. complete in all respects as per the technical specifications
8
-
-
... More
Supply, Installation ,testing and commissioning of indoor evaporative units Hiwall unit type of 2TR minimum capacity compatible with VRF system including cordless remote, suitable for operation single phase, 230 V, 50Hz supply, including fixing of room unit, with high lift drain pump, drain connection with U-trap and all necessary fittings, elbows, electrical cabling from power plug, structural supports etc. complete in all respects as per the technical specifications
1
-
-
... More
Supply,Installation,Testing and Commissioning of Gas/ Liquid Copper Piping of following diameter
and suitable thick insulation of closed cell nitrile rubber, factory laminated Aluminium FSK facing of 12 micron thickness as mentioned in technical specification,with minimum R value meeting the ECBC+ requirements for Refrigerant Piping Insulation, insulation shall have antimicrobial properties. Refrigerant piping shall have suction filters for gas line, filter drier & sight glass for liquid line as per specification for each indoor machines & outdoor units including chasing, drilling, concealing and making good the same on walls etc of following specifications as per site conditions. Suitable Refnet/ Y joints required for interconnection of piping & required pipe fittings and accessories like Bends, Tees, reducers, supports, clamps, etc shall be considered as part of refrigerant piping. The
thickness of insulation shall be as per ECBC+ requirements or 19 mm thickness whichever is
-
-
-
... More
Hard Copper Pipe 18Guage with 19mm thick Insulation ( 1 3/8") 34.9 mm
12
-
-
... More
Hard Copper Pipe 18Guage with 19mm thick Insulation ( 1 1/8") 28.58 mm
12
-
-
... More
Hard Copper Pipe 18Guage with 19mm thick Insulation ( 7/8") 22.2 mm
12
-
-
... More
Hard Copper Pipe 18Guage with 19mm thick Insulation ( 3/4") 19.05 mm
12
-
-
... More
Hard Copper Pipe 18Guage with 19mm thick Insulation ( 5/8") 15.875 mm
24
-
-
... More
Hard Copper Pipe 18Guage with 19mm thick Insulation ( 1/2") 12.7 mm
18
-
-
... More
Hard Copper Pipe 18Guage with 19mm thick Insulation ( 3/8") 9.525 mm
32
-
-
... More
Hard Copper Pipe 18Guage with 19mm thick Insulation ( 1/4") 6.35 mm
18
-
-
... More
Supply, installation ,testing & commissioning of central controller along with power consumption monitoring of each individual indoor and outdoor units with PDI wattmeter for controlling entire VRF system & 25% spare capacity for future provisions with suitable interconnecting control cabling between IDUs, ODUs and central controller as required with suitable interconnecting control cabling between IDUs, ODUs and central controller & associated accessories,Power wiring with necessary supports and complete in all respects as per the technical specifications.
1
-
-
... More
Supply, installation, testing and commissioning of PVC drain pipe of 6Kg/Sq.cm (beyond 5 m) of suitable dia connecting the drain pan of the indoor units with necessary U-traps, elbows, fittings etc. to nearest drain point, with insulated with 9 mm thick closed cell elastomeric class 0 insulation with 7 mils factory laminated glass cloth as per specification required pipe fittings and accessories like bends, tees, reducers, supports, clamps, suitably supported on trays, clamps etc. complete in all respects as per the technical specifications.
50
-
-
... More
Supply, Installation, testing and commissioning of 15000 CFM Smoke Extract Fans vane axial tube with Class H insulation (300 DegC for 2 hrs) VFD compatible motor(IE3) with mounting frame, vibration isolators and fire retardant type canvas connection, VFD , Power wiring etc. Complete in all respects as per technical specifications
5
-
-
... More
Air Distribution network
Supply, installation, testing and commissioning of factory fabricated machine made GSS sheet metal ducting complete with neoprene gaskets, elbows, splitter dampers, vanes, hangers, supports etc. for Supply air, Return air, Exhaust Air, Fresh Air as per ducting specifications and with suitable supports using MS angles, channels, rods, anchor bolts, etc to roof /truss as per IS 655 / SMACNA standards and complete in all respects as per the technical specifications.
-
-
-
... More
20 G
20
-
-
... More
22 G
372
-
-
... More
24 G
612
-
-
... More
Supplying and fixing of Closed cell nitrile rubber insulation with factory laminated Aluminium FSK facing of 12 micron thickness as mentioned in technical specification ,40-60 kg/m3 density, Butt all joints tightly and seal all breaks and joints by adhering glass cloth tape, fixing of insulation using OEM recommended fixing details ,supports and adhesive, tapes etc. complete in all respects as required by the technical specifications.The thickness of insulation shall be as per ECBC requirements to meet the temperature conditions of Inside:14 Deg C and Outside 40 Deg C or 19
856
-
-
... More
EXPOSED DUCT INSULATION
Supply and fixing of Thermal insulation on exposed ducts with 50mm thick, 55kg/m3 density, regular closed cell nitrile rubber insulation , anti-microbial protection (on duct ),Butt all joints tightly and seal all breaks and joints by adhering a 75 mm wide reinforced aluminium tape, as per specification. Quoted price shall be inclusive of adhesive, tapes, complete in all respects as per the technical specifications. All insulation shall be finished with 7mils woven fibre glass cloth covering adhered between two coats of fungicidal protective coating
148
-
-
... More
ACOUSTIC INSULATION
Supply and fixing of Acoustic lining inside sheet metal ducts with 10mm thick Open Cell nitrile rubber class 1, having density 140 kg/m3 insulation using manufacturers recommended adhesive, tapes etc and applications meeting class 0 as per BS 476 Part 6 & 7 and meeting NRC of 0.4 as per ISO 356 and complete in all respects as required by the technical specifications
80
-
-
... More
Supply, fixing, testing and balancing of Powder coated extruded aluminimum Supply Air Drum Jet Diffusers with aluminium volume control dampers, fixing supports, complete in all respects as per the technical specifications. Size: 550mm x 200mm
8
-
-
... More
Supply, fixing, testing and balancing of Powder coated extruded aluminimum Return Air Drum Jet Diffusers, fixing supports, complete in all respects as per the technical specifications. Size: 550mm x 200mm
8
-
-
... More
Supply,fixing, testing and balancing of Aluminium Exhaust Air louvers , dampers, fixing supports, complete in all respects as per the technical specifications.
23
-
-
... More
Supply,fixing, testing and balancing of opposed type volume control dampers of GI sheets to be provided with suitable links, levers and quadrants for manual control of volume of air flow and for proper balancing of the air distributions system , complete in all respects as per the technical specifications.
3
-
-
... More
Supply, Installation, testing & commissioning of Fusible link type Fire damper of 16 gauge GI sheets with fire rating of 300 Deg C for 2 hr for air distribution Networks , complete in all respects as per the technical specifications.
8
-
-
... More
Supply, Installation , testing and commissioning of Aluminium Extruded Fresh air louvers with fresh air damper, bird screen etc. complete in all respects as per the technical specifications.
1
-
-
... More
Supply,Installation,Testing and Commissioning of air curtains for doors of width 2000 mm. The system shall include all accessories including motors, blowers, door opening sensors etc with necessary stainless steel structural support for installation. The equipment shall be complete in all respects complying to technical specifications.
Throw :5400 mm Height
9
-
-
... More
Supply,Installation,Testing and Commissioning of air curtains for doors of width 1000 mm. The system shall include all accessories including motors, blowers, door opening sensors etc with necessary stainless steel structural support for installation. The equipment shall be complete in all respects complying to technical specifications.
Throw :5400 mm Height
2
-
-
... More
Supply, Installation, Testing and Commissioning of suitable capacity ceiling mounted DX-split units for the following areas. The area needs to be maintained at 0 deg C to 10 deg C and 65+5% RH - minimum 2 units in each chamber (1 working and 1 stand bye) complete with suitable capacity drive motor, air cooled condenser, condensing unit including suitably rated starter panel, power wiring as required from DB/isolator, with all accessories, hermetically/semi-hermetically sealed compressor, refrigerant copper pipes for suction and liquid line, elbow, reducers, insulation with 7mils woven fibre glass cloth covering adhered between two coats of fungicidal protective coating ,anti-microbial protection etc, electrical/ control cable (interconnection between IDU and ODU), CPVC drain pipe of suitable size connecting the drain lines from the indoor units to floor sump with suitable insulation as per specification, GI perforated trays of suitable width for routing Cu piping, drain piping etc, R- 404a/407c/134a refrigerant, charging of gas, vibration isolator pads and safety devices like thermal protector, pressure relief valve, over load relays, single phase preventer, high-low pressure cut out, earth connections all necessary electrical connections , necessary structural supports, microprocessor based control panel with digital display, safety devices etc and all necessary electricals, control cabling between temperature/Humidity sensor and IDU , distribution boards, necessary power sockets, light points,LED fixtures etc, suitable for three phase 440V supply etc . All required accessories including reheaters, de-frost heaters, out door type control panel with thermostat space heater etc as required as applicable shall be provided. complete in all respects as per the technical specifications.
Products to be Stored: Diary Products
2
-
-
... More
Supply, installation, testing and commissioning of temperature cum humidity sensors including digital display unit, interconnecting control power wiring as required in sealed conduit with MCC and 2 Spare cables complete in all respects as per the technical specifications. ( To be placed near the sliding door)
2
-
-
... More
RPUF PANELS & LIGHTING
Supply, installation, testing and commissioning of Prefabricated panels of 80 mm thick RPUF laminated with PCGI on both sides for walls, ceiling, columns with all necessary Flashings, Rivets, silicon sealants, ceiling suspension support, U profiles ,vision panel ,necessary doors, ventilation filters, floor drains etc. to complete the system requirement as per the technical specifications.
125
-
-
... More
Supply, installation, testing and commissioning of Sliding Doors (1.5 m x 2.4 m) of 80 mm thick RPUF laminated with PCGI on both sides for walls, with all necessary Flashings, Rivets,vision panel, silicon sealants etc, break lock arrangement for safety complete in all respects as per the technical specifications.
8
-
-
... More
Supply, installation, testing and commissioning of floor insulation of 40mm thick PUF slab etc, by applying tarfelt sheet (2 mm thk., 2 layers per sqmt) and bitumin (1 kg per sqmt x 3 layers per sqmt) for floor insulation including levelling if required complete in all respects as per the technical specifications.
41
-
-
... More
Supply, Installation, Testing and Commissioning of LED vapour proof type, IP65 light fixtures covered and protected by unbreakable glass or plastic food grade standard with all accessories including wiring, providing switches, DB etc, complete in all respects as per the technical specifications:
Cold room : Minimum Lux level to be maintained 300 lux
4
-
-
... More
Supply, Installation, Testing and Commissioning of safety buzzer & switch with all accessories
including wiring, providing switches, DB etc. complete in all respects as per the technical specifications
2
-
-
... More
HVACR- ALL INCUSIVE COMPHREHENSIVE MAINTENANCE CONTRACT
All Incluisve Comprehensive Maintenance Contract for five years after Two years DLP
All inclusive Comprehensive Maintenance Contract for all equipments covered under inventory list, Preventive Maintenance as per the recommendations of OEM and as per the technical specification and scope along with attending infinite number of breakdown maintenance calls for the equipments covered under this contract scope.
-
-
-
... More
1st Year (after DLP)
12
-
-
... More
2nd Year (after DLP)
12
-
-
... More
3rd Year (after DLP)
12
-
-
... More
4th Year (after DLP)
12
-
-
... More
5th Year (after DLP)
12
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements