Jawaharlal Nehru Port Trust Tender

Design, Structural checking from Consultant fabrication, supply, installation, protection, cleaning and handover of Semi-unitised Curtain wall systems with / without Mild steel insert in mullion, design to withstand a wind pressure not less than as mentioned in Technical specification ( 1.4 KPA ) . The curtain wall has to be fully prefabricated assembled units completed with glazed panels/sash frames units & install on to site fixed frames, channels and brackets. The quote includes interface details, flashing, sealants, insulations, Anchors & Bolt, brackets, Alum. copings and any sub frame as required. DGU Glass - 6 mm thick SG SKN II 476 ENVISION PLUS glass on outside and 6mm thick clear glass on the inside, having 12 mm air gap, including providing EPDM gasket, perforated aluminium spacers, Typical insulated vision glass [OUT]6mm HS with Double Low-e coating on surface 2 + 12mm Air Space + 6mm HS clear - Saint Gobain SKN II 476 Envision Plus MS Insert - MS to be diesel wash coated with Redoxide, insterted inside the Curtain wall sections with PVC backing , MS to be fixed to RCC Structure with MS Plate 12 mm thick and with Hitli fastners as per consultant design. Jointing of pipes to be done by using sleeves. Mullion 6131 - 60 x 200mm ( 4.921 kg / M) , Transom 5319 - 60 x 100mm ( 2.335 kg / M) with Combination Pressure Plate 10585 ( 0.642 kg/ M ) & Cover Plate 10583 ( 0.305kg / M) and transom connector 5779 - 57.9 x 50mm ( 1.808 kg/M ) complete with additional required pipe, weather sealent , hardware, M.S. Shoe Bracket, Fastner , Screw etc. etc. All internal & external exposed aluminium extrusion shall be in SDF Powder coating (To Meet Requirement of AAMA 2605) & colour to architect's selection. Rate to Include Transport, installation of glass scafolding , Structural stability report from Govt approved institution / IIT / COEP. complete. The item to be executed as per Architect schematic design.

S.S Hood Iland Type-Hoods Should Be Island Type Made Of 18 Swg S.S 304. Baffle Filters Should Be Made Of 19 Swg Border & 20Swg Filters. Should Be Na Fitted In Hoods. The Hood Should Have Light Arrangements.Exhaust Cut Out And Spot Cooling Cut Outs (If Any) Should Be Made As Per Hvac Vendor Requirement. )Proper Partition Should Be Given In Island Hoods. Proper Stifners Should Be Provided For Strengthening The Hoods Having More Than 2 Mtrs Length. All Hoods Drawings And Cut Out Should Made In Consulataion With Hvac Consulatant/Vendor To Be Made In Ss 304-100"X 72" X18"Ht

Potato Peeler - 20 Kg-Capacity As Required. The Unit To Be Mounted On A Stand Made Of S.S 16 Swg 304 With Suitable Arrangement For Accommodating Drain Pipe Of The Peeler. The Unit Should Have A Safety Mechanism By Which If The Door Opened The Unit Should Stopped.) The Abrasive On The Disk Shall Be Fiberglass Carborundum And The Disk Should Be Easily Removable For Maintenance & Cleaning. Unit Shall Be Provided With A Hose Connector. It Should Be Fitted With 1 Hp Motor For 3-Phase Operation.-Std