Jawaharlal Nehru Port Trust Tender

Excavation for roadway in earth,soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto alead of 50m. and spreading for embankment or stacking as directed.

Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete.

Providing and laying Cast insitu/ Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, form work, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic microprocess or based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Panmixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing and laying Cast insitu/ Ready Mix cement concrete M-30 of trap/ granite/ quartzite/ gneiss metal for R.C.C.work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc.columns as per detailed designs and drawing or as directed including Steel centering form work, cover block slaying/ pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro process or based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Panmixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing and laying Cast in situ /Ready Mix cement concrete M-30 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/ pumping, compaction and roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing and fabricating structural steel work inrolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted/ bolted/ welded connections without connecting plates, braces etc. and including one coat of anti corrosive paint and over it two coats of oil painting of approved quality and shade etc. complete.

Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.

Providing and fixing colour coated Zinc alume (R) AZ150 (min 150 gms/ sq.mt. total on each side) profiled sheets for roofing.The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness (BMT) (0.5 mm TCT), Hi - strength steel with min. 550 MPa yield strength, metallic hot dip coated with Aluminium - Zinc alloy (55% aluminium 43.4% zinc 1.6% silicon) with COLORBOND (R) steel quality super durable polyester paint coat (with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have no m. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square fluting in the five panat nominal180-250 mm center-to-center.The end rib shall be designed for anti-capillary groove and return leg.The feed material should have coil manufacturers product details marked are gular interval. Including fasteners with min.fastened with min. 25 um Zinc-Tin alloy coated, Hexhead, self-drilling screw etc. complete. (weight of profile 4.52 Kilogram/ One Square Metre)

Providing & fixing hand Railing consisting of G.I. 2inch dia horizontal and vertical pipes, fixing chain link fencing on pipe & fixing vertical handrail posts in a C.C. M-15 grade foundation block of size 40cmx40cmx50cm including excavation for foundation in any type os soil boulder etc. complete. As shown in Drawing

Dismantaling of Watch Tower by Gas Cutting Set

Part - B: Electrical Items

Supplying, erecting and terminating XLPE armoured cable 1.1 kV grade with I.S.I mark 3.5 core 25 sq.mm Copper Conductor with continous 5.48 Sq.mm (12 SWG) G..I earth wire and 25mm GI Strip complete erected with glands and lugs laid in provided trench/pipe (As per PWD Specification No.CB-LT/CU), Make-polycab/ Finolex/ Vinay/ RR/ Gloaster/ Gemscab/ vishal/ Nicco/ KEI/ Ravin

Supplying, erecting and terminating XLPE armoured cable 1.1 kV grade with I.S.I mark 3.5 core 50 sq.mm Copper Conductor with continous 5.48 Sq.mm (12 SWG) G..I earth wire and 25mm GI Strip complete erected with glands and lugs laid in provided trench/pipe (As per PWD Specification No.CB-LT/CU), Make-polycab/ Finolex/ Vinay/ RR/ Gloaster/ Gemscab/ vishal/ Nicco/ KEI/ Ravin

Supplying and laying 50mm outside dia. Double Wall Corrugated (DWC) of HDPE Pipe for enclosing cable with GI Sadlling, Conduit etc.

Supplying and erecting mains with 3x6 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW

Supplying & erecting single phase, 240V, street light control panel up to the max load of 6kW, SPN MCB 40A, powder coated CRCA 14 SWG sheet, outdoor type, having IP54,IK10 protection, suitable rating contactor, 24 hrs. astronomical time switch with minimum 5 years battery back up, auto/manual selector switch, ON/OFF push buttons, indicator lamps, control wiring, metering device, etc. for automatic operation, with overcurrent, short circuit, earth fault protection on iron frame/ CC foundation (Complete work including foundation and Erection of Panel).

Supplying and erceting CS Mounted Revolving Search Light 300 W, Manually Controlled, Effective Range : 1000 Mtrs., Beam Range : 1000 Mtrs. Fixed Beam, High Efficiency Glass/SS Reflector/Lenses, Rotating Axis with Locking Arrangement, Proper Gripped Handle at back, Painted by Heat Proof Epoxy Powder Coated, Warranty 24 Months with installation charges, (IS:10322) prt5 sec5 including IP65 Test from NABS Approved Government Test Lab with instruction Catelogue, Model No. CS-LRFLL-25PC30, Make - Kalin and Equivalent.

Supplying and erceting CS Mounted Revolving Flame Proof Search Light 300 W, Manually Controlled, Effective Range : 1000 Mtrs., Beam Range : 1000 Mtrs. Fixed Beam, High Efficiency Glass/SS Reflector/Lenses, Rotating Axis with Locking Arrangement, Proper Gripped Handle at back, Painted by Heat Proof Epoxy Powder Coated, (IS:10322) prt5 sec5 including IP65 Test from NABS Approved Government Test Lab with instruction Catelogue, Model No. CS-LRFLL-25PC30, Make - Kalin and Equivalent.

Point wiring for light/fan/ Exhaust Fan/Bell concealed type with 3x 1.5 sq. mm 1.1 kV grade ISI marked copper PVC insulated FRLS grade (Fire Retardant Low smoke) wire for phase, neutral and earthing, with appropriate colour coding and with limitation to no. of wires with respect to pipe size duly drawing in rigid PVC conduit (HMS) minimum 20 mm dia. ISI marked with necessary accessories viz. Deep junction boxes, inspection boxes, bends etc. making complete piping rigid by adhesive/resin and fixed with binding wire, 'U' nails, all duly concealed in ceiling, RCC slab, beam while casting and in walls by making chases; finished with cement morter to match background complete and terminating the wires with pin type lugs in ceiling rose/ lamp holder/ connector/ batten holder/ angle holder erected on hylam plate on box and modular type 10-A switch erected on original sheet metal box/ non-metallic un breakable box flush on wall with double (mounting & cover) plate, Anchor/ Roma make modular Switches and Required Accessaries. (As per PWD Specification No.WG-PW/CW)

Point wiring for independent plug. Concealed type with 3 x 2.5 sq. mm 1.1 kV grade ISI marked copper PVC insulated FRLS grade (Fire Retardant Low Smoke) wire for phase, neutral and earthing, with appropriate colour coding and with limitation to no. of wires with respect to pipe size in rigid PVC conduit (HMS) minimum 20 mm dia. ISI marked with necessary accessories viz. deep junction boxes, inspection boxes, bends etc. making complete piping rigid by adhesive/resin and fixed with binding wire, 'U' nails, all duly concealed in ceiling, RCC slab, beam while casting and in walls by making chases; finished with cement morter to match background complete and terminating wires with pin type lugs in 3 pin 10A modular type socket and 10A/20A shutter type combined modular type switch erected on independent original sheet metal box/non metallic un-breakable box erected flush on wall with necessary finishing as per the background along with double (mounting and cover)plate, Crequired accessaries. (As per PWD Specification No.WG-PW/SW)

Supplying and erecting bracket fan 400 mm. sweep A. C. 230 volts 50 cycles 1350 RPM. Oscillating type, plastic or metal blades chrome plated guard with speed regulator and moisture proof treatment to winding and with ‘E’ class insulation.

Supplying and erecting LED square / circular Max. 25 W down lighter/Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 2750 Lumens, min. efficacy of 110 lumen/W, CRI80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD10%, p.f. 0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty.