Jawaharlal Nehru Port Trust Tender
Search from over 12139+ business opportunities that have been announced from the biggest Mahatenders, e tender Maharashtra, Maharashtra government tenders, and the Online Tender Notices posted on Maharashtra e tenders till date. Find opportunities that have come in from the multiple corporations, Maharashtra government departments, State PSUs, and Private companies from the state.
Jawaharlal Nehru Port Trust - JNPT Tender
Civil And Construction
Civil Works Others
Eprocure
Opening Date29 May 2024
Closing Date6 Jul 2024
Tender Amount₹ 22,30,02,362
Costs
EMD
₹ 52,63,000Document Cost
₹ 23,600Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_JNPT_809133_1Bid Award Id
ViewTender No
PPD/DGM-I/FTB/T-08/2024Tender Authority
Jawaharlal Nehru Port Trust ViewPurchaser Address
-Website
http://http://www.jnport.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Removing lime or lean cement concrete including stacking the spoils as directed with all leads, lifts etc, complete.
115
-
-
Removing doors and windows with frames and stacking the materials as directed with all leads, lifts etc. complete
9
-
-
Removing ventilators and small windows with frame and stacking the materials with all leads, lifts etc. complete.
2
-
-
Removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. complete
95
-
-
Removing earthen, stonewate pipe and stacking them as directed with all leads, lifts etc. complete
100
-
-
Removing cast iron or wrought iron or A.C. pipe and stacking them as directed with all leads, lifts etc. complete.
100
-
-
Removing urinal pans or wash hand basins with frame including disconnecting the sanitary and water supply connections, removing the same carefully and stacking the serviceable materials as and where directed including throwing the unserviceable materials outside etc complete
5
-
-
Removing W.C. pans including disconnecting the sanitary and water supplyconnections, removing and breaking flooring and bed con-crete around pan removing the same carefully and stacking the serviceable materials as adn where directed including throwing the unserviceable materiasls out side etc. carefully and throwing out the refusal outside etc. complete.
2
-
-
Providing JCB on hire basis including fuel, operator etc for excavating/ desilting/ shifting, loading, unloading and levelling of excavated/ Desilted material as directed with all leads, lifts etc, complete.
120
-
-
Providing Hydra 830- 30 MT on hire basis including fuel, operator etc for shifting, loading, unloading of M.S.pipes / RCC Pipes /stones weighing 500 to 1000 kilogram for Apron / Armour layer including conveying with all the leads, lifts, laying in required etc completed as directed by Engineer-Incharge.
120
-
-
Providing dumper on hire basis including fuel, operator etc for shifting, loading, unloading of excavated / Desilted material as directed with all leads, lifts etc, complete.
120
-
-
Removing brick bat coba including stacking the spoils as directed with all leads, lifts etc, complete.
15
-
-
Removing the existing cement plaster of any thickness without causing dust nuisance and stacking the debris upto a distance of 50 metres or spreading in the compound and cleaning the site etc. complete.
200
-
-
Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means
7025
-
-
Excavation for foundation in hard rock by controlled blasting including shoring and strutting, dewatering as necessary and disposing off excavated stuff as directed etc. complete. a) Upto 1.50m lift Normal Rate
50
-
-
Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete.
500
-
-
Providing selected hard murum filling including laying in layers of 15 to 20cmwith watering and compacting etc. complete.
1130
-
-
Providing placing and Driving in position 6 millimeter mild steel liner for R.C.C. Piles upto required depth with 12mm thick mild steel cutting edge of 0.50m length at bottom including fabricating cutting the mild steel sheet to required diameter and shape ,welding the joints and driving with the help of required machineries including all materials labours and lifts etc. complete as directed by the Engineer in charge. Spec :(As directed by Engineer in Charge From 3.00 to 9.50 meter deep liner
505
-
-
Providing and casting in situ / ready mix PCC M20 grade of trap metal for coping to head walls / parapet including centering, form work, compaction and curing etc. complete. (with reversible drum type mixer/ concrete batch mix plant (pan mixer) with SCADA with fine agreegates of required specifications (Natural sand / VSI sand finely washed etc )
500
-
-
Providing and laying cast in situ / ready mix M40 RCC for 600 mm diameter bored piles each of load capacity as per design and of specified diameter of as directed, placed through steel shell sunk to the required depth through all strata except rock, excluding provision of reinforcement including placing concrete by tremie arrangement, compaction of concrete and withdrawal of steel shell with fully automatic micro processor based PLC with SCADA enabled with reversible drum type mixer/ concrete batch mix plant (pan mixer) etc. complete.with VSI quality artifical sand (depth 0 to 5 metre) i) Add 30% extra for depth 5 to 10 m ii) Add 40% extra for depth 10 to 15 m iii) Add 60% extra for depth 15 to 20 m
620
-
-
Chiseling:- Chiseling through soft rock/ weathered rock/ hard rock/ large boulders/ masonry /concrete etc. using a chisel weighing not less than 750 kg etc. completed.
780
-
-
Chipping and dressing of the R.C.C. piles upto 0.60 meter including cleaning reinforcement and removal of dismantled materials upto a distance of 50 meter beyond the building area etc. for providing pile caps.
112
-
-
Conducting Dyamic load test :-Carrying out load test for 1.5 times the proposed safe working load on the pile in driven position above 550 mm and upto 650 mm diameter including construction of test cap, use of accessories and instruments including providing graphs as per I.S. code or Std.Specifications and dismantling the test cap after testing and cleaning the site complete.
4
-
-
Conducting Pile Integrity test
112
-
-
Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap metal for R.C.C. pile caps as per detailed designs and drawings, including bailing out water manually, centering, formwork, laying/ pumping, compacting, finishing and curing etc. with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) complete (Excluding steel reinforcement
120
-
-
Providing & applying approved quality coal tar epoxy paint in three coat for surface of pier, fountdation, pile cap, pier, abutmant below ground level including cleaning surface, scaffolding etc. complete.
375
-
-
Providing and laying Cast in situ/Ready Mix cement concrete M-40 of trap / granite/quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade
60
-
-
Providing and laying Cast in situ/Ready Mix cement concrete M-40 of trap / granite/quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
165
-
-
Providing Bipolar Concrete Penetrating Corrosion Inhibiting Admixtire to integral concrete POLYALK CP ( SUNANDA MAKE) or KP 200 of M/s. Krishna Conchem or equivlent at those dose of 3 kg per cum. Of concrete. Inhibitor should be non nitrite based and have the ability to provide corrosion protection to both anodic & cathodic sites on steeel surface. Inhibitor should form polydentate complexes with the steel surface to promote proper film formation. Inhibitor must not have any adverse effect on concrete compressive strength. This may be estableshed through laboratory test results from independent laboratory. Inhibitor test reports accredited laboratory indicating significant reduction in corrosion after accelerated corrosion test based on JIS Z 1535. Further inhibitor must have undergone long term performamce test as per ASTM G3 indicating rebar weight loss of less than 5mpy for both tests. Work shall be executed by certified applicator only and work shall br guaranteed for 5 years and gaurantee shall be given on Rs. 500/- stamp paper in Stipulated format.
7820
-
-
Filling in plinth and floors with approved excavated material in 15cm. to 20cm. Layers including watering and compacting etc. complete.
725
-
-
Crushed sand (upto 5 mm) brought by Contractor
70
-
-
Providing and laying Cast in situ/Ready Mix cement concrete M-40 of trap / granite/quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
40
-
-
Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete
335
-
-
Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of 2 bars of 6 mm diameter / 2 hoop iron strips 25 mm X 1.6 mm placed at every third course, properly bent and bonded at ends scaffolding, racking out joints and watering etc. complete.
50
-
-
Providing and laying Cast in situ/Ready Mix cement concrete M-40 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
240
-
-
Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
55
-
-
Providing and laying Cast in situ/Ready Mixcement concrete M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
5
-
-
Stamp Concrete of 100mm Thickness - Providing and Laying in-situ M30 Grade unreinforced plain cement stamp concrete of 100mm thickness pavement over a prepared sub base with 43 grade cement, coarse and fine aggregate (natural sand / VSI grade finely washed crushed sand) Confirming to IS 383, as per mixed in a batching and mixing plant / non tilting mixer and weigh batcher as per approved mix design, admixtures, transporting to site in nagpur city with lead upto 20KM (on Inner Ring Road from Avasti nagar to wadi), spreading, laying with approved make pover, compacted and finished in a continous operation, finishing to lines and grades Also Providing, Placing and applying stamp powder which is light fast UV resistant pigment with appropriate chemical compounds of desired colour on base concrete after excess bleed water has evaporated using dry shake method @5Kg. per Sqm.. Including texturing, and covering with plastic sheet (min 200 micron thickness) and also applying two coats of UV-stable,30 % solids clear sealer @ 150 to 250 gms per Sqm. using surface roller and protecting from falling dust,dirt and curring by curring compound / by providing cement vata in cement Mortor 1 :8 @ 0.6m x 0.6m center to center, admeasuring 80mm at bottom and 40mm at top with depth of 75mm and maintaining the same throughout curing period by any other method approved by Engineer-incharge or Landscape architect etc. complete. (prior approval of superinteding Engineer will be necessary )
150
-
-
Providing and laying in situ M-20 cement concrete of trap / granite / quartzite / gneiss metal with 15% plum of trap stones for foundation and bedding of retaining walls and jetty etc. including necessary formwork, compacting, curing, bailing out water manually in tidal range etc. complete.
80
-
-
Providing cast in situ / ready mix M30 grade cement concrete for head walls of CD work / retaining walls etc. including necessary form work, compaction, finishing and curing etc. complete. (with reversible drum type mixer/ concrete batch mix plant (pan mixer) with SCADA
440
-
-
Providing and fixing during laying in RCC Slab rectangular 2 mm thick M.S. sheet fan hook box of size 180x100 mm with required depth with holes or notches as required, bottom and top sides of 1.6 mm M.S. sheet fixed with 3.5 mm dia. round headed screws together with 12 mm dia. M.S. bar bent to shape with hooked ends for fan hook and painting to exposed surface
130
-
-
Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap / quartzite/granite /gneiss metal for R.C.C. Waist slab, and steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/ steel formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding einforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
40
-
-
Providing and fixing in position HCRM / CRS (Corrosion Resistant Steel) bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.
440
-
-
Providing and fixing stainless steel (Grade 304) hollow section round/ square tube as per detailed design and drawing are as directed by EIC including cutting, fabricating, haisting, errecting, fixing in position,making bolted/ welded connections without connecting plates,braces etc. complete.
23700
-
-
Providing and fixing in position to the exact profile and prestressing the high tensile strands to specified ultimate strength, standard end anchorages, cable ducts, grouting ducts after prestressing and bearing plates with wedges as per detailed drawings including necessary plant and machinery for prestressing etc. complete.
5
-
-
WATERPROOFING
-
-
-
Waterproofing Treatment to new Toilet/bathroom by using Polymeric Cementitious Membrane as approved by Engineer in charge, followed by 112mm thick brick bat coba covered with 20 mm mortar finish. If there are cracks on the bare slab, open the crack in V Groove and fill it with ready to use repair polymer modified mortar based on special cements, aldehyde based polymers with thixotropy modifying agents. If there are lots of honeycombs and identified bad patches of concrete the same should be grouted as per the instructions of site incharge. (The grouting shall be paid separately). Clean the entire surface thoroughly and over this prepared surface, apply three coats of polymeric Cementitious waterproofing coating having a non-toxic, 2-(methoxycarbonyl)-1-propeneButyl-2 propenoate (MPBP) based polymeric waterproofing solution as approved by Engineer in charge. Provide and lay 112 mm average thicknes of brick bat coba in cement mortar 1:5 over 12mm thick CM 1:3 bedding with one pouch of 330 grams of thorough blend of special cements, aldehyde based polymers, shrinkage compensating agents as approved by Engineer in charge per 50 Kg. bag of cement and finishing with 20 mm thick cement plaster in cement mortar 1:3 by mixing one 330 grams pouch of above admixture per 50 Kg. bag of cement, including all lead, lifts and laid to proper slope to drain off water entirely preparing bell mouth including watta, beveled or champhered portion at the junction of wall and work up to a height of 300 mm or as directed and including finishing the top layer of waterproofing treatement with false marking of 30 cm x 30 cm or as directed, curing and covering the whole treatment. MPBP Polymeric Waterproofing Coating for Concrete and Masonry should have following minimum properties:1) Elongation % (ASTM D412-2016): @ 100% 2) Tensile Strength N/mm2 (ASTM D412- 2016): 3.3 3) Specific Gravity: 1.02 ± 0.02 4) Total Solids (ASTM D1644-2012): 43.98 5) Hardness Shore A (ASTM D2240-2015): 82
35
-
-
Waterproofing treatment to new terrace by using chlorinated paraffinated talCum. polyurethane (CPTP) elastomeric membrane as approved by Engineer in charge, followed by average 112mm thick brick bat coba covered with 40mm thick IPS. The procedure includes filling of cracks on the RCC slab with high performance polyurethane (liquid applied) membrane. Clean the entire surface thoroughly and over this prepared surface, apply a primer coat of high performance polyurethane (liquid applied) membrane as approved by Engineer in charge. Apply the primer by roller. Extend the coating to parapet walls including the top of parapet. Allow the primer coat to set for 24 hrs. After the primer coat is set, apply two coats of chlorinated paraffinated talCum. polyurethane (CPTP) elastomeric membrane as approved by Engineer in charge on surface. Ensure that pinholes are touched up properly. While the second coat of high performance polyurethane (liquid applied) membrane is wet and tacky, sprinkle coarse sand over the surface to make it rough and provide mechanical key for further treatment. Provide and lay average 15 mm thk protective coat of CM in 1:4 over the surface and allow to set and cure. Provide and lay 112 mm thk BB coba in average thickness in cement mortar 1:5 with one pouch of thorough blend of special cements, aldehyde based polymers, shrinkage compensating agents - which is based on special cements, aldehyde based polymers, shrinkage compensating agents and selected sands having high abrasion resistance as approved by Engineer in charge per 50 Kg. bag of cement and finishing with 40 mm thick IPS layer in M-20 CC by mixing one pouch of 330 grams of thorough blend of special cements, aldehyde based polymers, shrinkage compensating agents per 50 Kg. bag of cement, including all leads, lifts and laid to proper slope to drain off water entirely preparing bell mouth including watta, beveled or champhered portion at the junction of parapet and work up to a height of 300 mm or as directed and including finishing the top layer of waterproofing treatment with false marking of 30 cm x 30 cm or as directed, curing and covering the whole treatment. The liquid membrane should have a track record of atleast 4 years in India & Gulf region and have atleast an 4 year track record in PWD. Single Component, Liquid Applied, chlorinated paraffinated talCum. polyurethane (CPTP) elastomeric membrane should have following minimum properties: 1) Water Permeability
440
-
-
Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1Kilogramper cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete.
380
-
-
PLASTERING
-
-
-
Providing Silica plaster plaster externally in two coats in all positions including base coat of 8 to 10 mm thick curing the same for not less than two days and keeping the surface of base coat rough to receive the final coat treatment 5 to 7 mm thick .finishing the surface by taking out grains and curing for 8 to 10 daysscaffolding etc complete.(The silica plast material shall contain 53 grade OPC cement with pozzolanic materials .size of agreegates shall be of 3 mm having 1:3 proportion with cement.
1200
-
-
Providing internal cement plaster 25 mm thick in single coat using Ready to use wall plaster in cement mortar 1:4 to concrete, brick, stone surfaces in all positions including scaffolding and curing. Providing groove at joint of B.B. Masonry and concrete members complete. With Prior Approval of Concerned S.E.
2115
-
-
Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete
2015
-
-
Providing internal cement plaster 6 mm thick in a single coat in cement mortar 1:3 without neeru finish to concrete surface in all positions including scaffolding and curing etc. complete.
505
-
-
FLOORING AND WALL CLADDING
-
-
-
Providing and laying vitrified mirror / glossy finish tiles decorative type having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete.
230
-
-
Providing and laying vitrified mirror / glossy finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete
20
-
-
Providing and laying Antiskid Ceramic tiles of approved quality of size 30 cm x 30 cm and confirming to IS 15622-2006 (Group-B IIA) for antiskid flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. complete
30
-
-
Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with full moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etc. complete.
210
-
-
Providing and laying in position flooring of telephone black / Amba White / Cat bary brown / Ruby red / Ocean Brown granite stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete.
200
-
-
Providing and laying telephone black / Amba White / Cadburybrown / Ruby red / Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler Nos.ing/moulding the sharp edges wherever necessary, curing, etc. complete
150
-
-
Providing and laying Vitrified RUSTIC MATT STONE finish having decorative type tiles of size 600 millimeter x 600 millimeter of 8 to 10 millimeter thickness (on a existing flooring) with bonding chemical and confirming to IS 15622-2006 (Group Bla) of approved make shade and pattern for flooring in required position laid on a bed of bonding chemical filling joints curing and cleaning etc. complete.
500
-
-
Providing and constructing granite kitchen platform with fixing of stainless steel sink 600 mm x 450 mm size as per detailed drawing including vertical both side polished kadappah stone 25 to 30 mm thick supports with kadappah top 35 to 40 mm thick and polished granite 16 to 20 mm top with side strips of granite at front and both sides of platform raised with two vertical granite supports 15 cm height and top granite of 75 x 40 cm including cutting, opening for sink of required size in kadappah as well as granite etc. complete. (Platform top size 5.00 m x 0.60 m and height is 0.75 m)
5
-
-
Providing and constructing granite kitchen platform with fixing of stainless steel sink 600 mm x 450 mm with drain tray size as per detailed drawing including vertical both side polished kadappah stone 25 to 30 mm thick supports with kadappah top 35 to 40 mm thick and polished granite 16 to 20 mm top with side strips of granite at front and both sides of platform raised with two vertical granite supports 15 cm height and top granite of 75 x 40 cm including cutting, opening for sink of required size in kadappah as well as granite etc. complete. (Platform top size 5.00 m x 0.60 m and height is 0.75 m)
7
-
-
Providing and fixing machine cut mirror polished 18 mm to 20 mm thick telephone black granite / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone partition with full moulding the edges etc. complete . Both side polish
4
-
-
Providing and fixing composite marble counter: providing and fixing wash basin counter in toilets of 500-600 mm deep made of coloured composite stone supported on 20-25mm thick Kaddappa base. 75mm wide facia to be provided at the edge of the counter. The cost to include of making hole in the counter for fixing wash basin.
4
-
-
Providing and fixing machine cut mirror polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone partition with full moulding the edges etc. complete. One side polish
10
-
-
Providing and fixing factory made Hydraulically pressed Mechanically vibrated and compacted precast inter locking cement concrete paving blocks 100MM thick in M-50 grade of approved size and shape for City streets and roads with high volume/ heavy traffice as specified and as per IS 15658:2006 including cost of all materials, manufacturing, curing, transportation of blocks to work site including loading, unloading and stacking as directed, laying paving blocks in position over prepared bed of natural sand / crushed sand of 50 mm thickness including necessary excavation in all stratas, spreading blindge of fine sand over the prepared bed, compacting blocks by plate vibrator etc. complete
170
-
-
Providing and laying Rough Shahabad Stone Flooring 50mm to 60mm thick and of required width in plain/ diamond pattern on a bed of 1:6 C.M. including cement float, striking joints, pointing in cement mortar 1:3 curing and cleaning etc. etc. complete.
350
-
-
Providing and laying Polished Kota stone flooring With Hand-Cut Polished Kota Stones 25mm to 30mm thick and required width in plain/diamond pattern on bed of 1:6 Cement mortar including cement float, filling joints with neat cement slurry, curing, cleaning and Mirror Polishing etc. complete Note- Water absorption for kota stone should not exceed 0.05%.( Item to be used with prior permission of Superintending Engineer )
240
-
-
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3Kg. per Sqm., including pointing in white cement mixed with pigment of matching shade complete.
255
-
-
Providing and fixing Glass mossaic tiles on finished plain wall surface of size 20 mm x 20 mm x 4 mm in all colour, design , fixing in customize design as per direction of Engineer-in- Charge. The glass mosaic tiles to be fixed on the wall surface with the help of approved adhesive applied at the rate of 2.5 Kg. per Sqm. and grouting of the same. The rate is inclusive of all operation, material and required pattern approved by Engineer-in-Charge
510
-
-
Supply, fixing and installation of 4mm thick Aluminium Composite Panel (ACP) of approved colour for external cladding in combination of solid and metallic colours, including all necessary Framework, support and complete weather sealing as per architectural drawing. The Aluminium Composite Panel (ACP) should be made out of thermoplastic core of low-density polyethylene LDPE (100% virgin mix), sandwiched between two aluminium sheets of ALLOY GRADE- 5000 series, each not less than 0.50 mm thick, total thickness of aluminium composite panels not to be less than 4 mm, the exposed surface thereof shall have Stove lacquered finishing coat not less than (26 + - 2) micron (containing minimum 70% kynar 500 based PVDF) of colour and shade as per architectural design. The inside surface (facing the building exterior surface)shall have polyster based powder coating not less than 25 Micron with protective peel-off foil on the exterior face (peel off film will in no case leave any adhesive mark over the composite panel surface after it is peeled off). The supporting framework shall be made out of 50 mm X25mm X 3mm thick Aluminium section to be spaced horizontally and vertically for fixing of panel of size 900 mm X 1200 mm and fixed to the building structure as per design through 50mm X50mm X5 mm MS angle clamps prefixed to masonry or slab, columns with Hilti make anchor fastener screws. The fixing of panel to be done with the help of VHB tapes and screws and all the sealing of joints to be done with weather sealent Silicon as directed by Engineer-in-charge. (Prior permission of S.E. is necessary before inclusion of this item in estimate)
400
-
-
Providing and fixing required size of decorative aluminium fins for exterior elevation including structural steel work in rolled sections, fixed with connecting plates or angle cleats in main and cross beams, hip and jack rafters, purlins connecting to truss members and the like, as per detailed designs and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position, making riveted/bolted/welded connections and one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete
70
-
-
WALL FINISHING
-
-
-
Providing and applying plastic emulsion paint of approved quality, colour and shade to old and new surfaces in two coats including scaffolding, preparing the surface. (excluding the primer coat)etc. complete
2120
-
-
Providing and applying white-wash in one coat on old / new plastered or masonry surfaces and asbestos cement sheets including scaffolding and preparing the surface by brushing and brooming down etc. complete.
70
-
-
Providing and applying Royale Luxury Emulsion of approved make on internal wall surface as detailed below Scrapping for surface with emery paper and wipe clean for area. wall primer with brush by adding mineral turpentine oil by 8 to 10 % or water by 15 to 20% allowing to dry for 6 to 8 hoursAfter applying acrylic wall putty with appropriate prpportion of water of allow to dry for period of 4 to 6 hours of activity. Scrapping with emery paper and wipe clean Applying paints Royale Luxury emulsion 1st coat with brush water content water 40 to 45% or 65 to 70% by role Applying paints Royale luxury emulsion 2nd coat with brush with water content 40 to 45% or 65 to 70 % by roller. (With prior approval of S.E.
70
-
-
Providing and laying ceramic tiles having size 30 cm. x 60 cm. confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete
215
-
-
Design, Structural checking from Consultant fabrication, supply, installation, protection, cleaning and handover of Semi-unitised Curtain wall systems with / without Mild steel insert in mullion, design to withstand a wind pressure not less than as mentioned in Technical specification ( 1.4 KPA ) . The curtain wall has to be fully prefabricated assembled units completed with glazed panels/sash frames units & install on to site fixed frames, channels and brackets. The quote includes interface details, flashing, sealants, insulations, Anchors & Bolt, brackets, Alum. copings and any sub frame as required. DGU Glass - 6 mm thick SG SKN II 476 ENVISION PLUS glass on outside and 6mm thick clear glass on the inside, having 12 mm air gap, including providing EPDM gasket, perforated aluminium spacers, Typical insulated vision glass [OUT]6mm HS with Double Low-e coating on surface 2 + 12mm Air Space + 6mm HS clear - Saint Gobain SKN II 476 Envision Plus MS Insert - MS to be diesel wash coated with Redoxide, insterted nside the Curtain wall sections with PVC backing , MS to be fixed to RCC Structure with MS Plate 12 mm thick and with Hitli fastners as per consultant design. Jointing of pipes to be done by using sleeves. Mullion 6131 - 60 x 200mm ( 4.921 kg / M) , Transom 5319 - 60 x 100mm ( 2.335 kg / M) with Combination Pressure Plate 10585 ( 0.642 kg/ M ) & Cover Plate 10583 ( 0.305kg / M) and transom connector 5779 - 57.9 x 50mm ( 1.808 kg/M ) complete with additional required pipe, weather sealent , hardware, M.S. Shoe Bracket, Fastner , Screw etc. etc. All internal & external exposed aluminium extrusion shall be in SDF Powder coating (To Meet Requirement of AAMA 2605) & colourto architect's selection. Rate to Include Transport, installation of glass scafolding , Structural stability report from Govt approved institution / IIT / COEP. complete. The item to be executed as per Architect schematic design.
330
-
-
Providing and laying vitrified mirror / glossy finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete
35
-
-
MS FABRICATION / IRON WORK
-
-
-
Providing and fixing 900mm high S.S.304 Grade Stainless steel railing with 40mm diameter and 1.5mm thick at top, 40mm diameter and 1.5mm thick vertical supports spaced at 1.5m center to center and 8mm thick toughened glass including fabricating ,fixtures, errecting , necessary welding , grinding , finishing, buffing to stainless steel pipe etc. complete
200
-
-
Providing and Fixing mat finish stainless steel (of 302 grade ) railing with top pipe of 50 mm dia. and vertical pipe of 38 mm dia at 0.60 m c/c or as required and horizontal pipes of 25 mm dia in three rows, all pipes of 2 mm thick including buffing,fabricating fixtures and fastening including pipe base of appropriate diameter and ball base of 75 mm dia above newel post of 75 mm diameter etc. complete (Prior approval of sample and brand by Ex.Engineer is necessary before use)
250
-
-
Providing and fixing mild steel grill work for windows, ventilators etc. 20 Kilogram/ One Square Metre as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete.
20
-
-
Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9 mm with lock plate of 3.15 mm thickness reinforced with 35 x 35 x 5 mm angle section fitted with sliding bolts and handles for both sides, deep M.S. channel section of depth and thickness not less than 65 mm and 3.15 mm respectively with hold fast arrangements, M.S. Bracket plate 300 x 300 x 3.15 mm minimum size and shape with square bar, suspension shaft of minimum 32 mm diameter, hood cover of M.S. sheet not less than 0.9 mm thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade cast iron or mild steel and one coat of red lead primer etc. complete. (I.S. 62481979) (With mechanical gear)
55
-
-
CARPAINTRY WORK
-
-
-
Proving and fixing in place single leaf glass door for cabins of overall size of each leaf 900 mm x 2100 mm made out of 6 mm thick. toughened glass. The door will be finished with necessary accessories like patch fitting piolet, floor spring, lock handle etc. rate of include cost of heavy duty floor spring (capacity 120 Kg.), ss handle of size 450 mm ball bearing hinges, mortise concealed dead lock, door stoper and all required hardware complete as directed. (all fitting is Hafele or equivalent)
25
-
-
Providing and fixing door shutter in veneer finish: providing and fixing on site full height. Both side mating veneer finished door shutter with control access security system at require location and having height more than 1:5 meter made by using solid core commercial type flush door 35 mm thick with of the requisite manufacturer viz. anchor/century / Kenwood/ duro or equivalent generally confirming to I.S.303 finished with grooves on both side include melamine polishing anti-termite treatment to plywood and wood work with ten years guarantee bond etc. including all leads and lifts etc. complete necessary lipping (BTC) moulding, hardware, locks, handles etc, as per architectural drawing to be approved by employer before entire scheme is finalised and directed by engineer in charge.
30
-
-
Proving and fixing in place single leaf glass door for cabins of overall size of each leaf 900 mm x 2100 mm made out of 8 mm thick. toughened glass. The door will be finished with necessary accessories like patch fitting piolet, floor spring, lock handle etc. rate of include cost of heavy duty floor spring (capacity 120 Kg.), ss handle of size 450 mm ball bearing hinges, mortise concealed dead lock, door stoper and all required hardware complete as directed. (all fitting is Hafele or equivalent)
3
-
-
Providing and fixing plywood Laminated panelling, frame work as per requirement to be Fixed on wall/masonry/column with necessary fixing details to attain the reqd level of the surface, stability & rigidity. framework to be covered using 12 mm thick Mariane grade plywood as per design. Finished with 1 mm thick approved laminate from sides & top. Edges of laminate to be made smooth. Rate inclusive of necessary Cutouts for switches /lights & other fixtures Basic Rate of laminte Rs. 450/Sq.M..
35
-
-
Toilet door frame non teak wood: providing modifying and fixing door frame as per drawing and specification with cutting /ratifying of existing door frame and modifying with 18 mm ply required size, shape and dimension with architect approved 4 mm thick veneer, lipping and beading BTC patty including Melamine polishing etc. complete as directed by engineer in charge.
3
-
-
Providing and fixing in position (as per 1868 / 1982) Alluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 Kilogram/One Running Metre. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 Kilogram/One Running Metre.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 Kilogram/Running metre. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 Kilogram/One Running Metre. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 Kilogram/Running metre. and handle and top section 40 x 18 x 1.25 mm at weight 0.417 Kilogram/Running metre. As per detailed drawings and as directed by Engineerincharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With colour Anodising with box
20
-
-
Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete.
2
-
-
Frosted Film for glass partitions Providing & fixing Roller blind made up of APO Grey or approved shade 100% polyester or polymer coated glass fi bre. with White coloured hardware • Bracket covers • Double bead plastic chain, secured with a child safety cord tensioner • Dual brackets • Linked brackets • Headbox • Side channels etc complete as approved by the Engineer in charge etc. all complete. (Hunter Douglas or equivalent
25
-
-
Providing and casting in situ or precast tapering R.C.C. M-20 Barrier type Kerb without gutter ( as per IRC 86 1983) embedded 125mm below ground level over M-10 PCC finished neatly with C.M. 1:2, setting the same in C.M. 1:2, including the required excavation in any strata and removing the excavated stuff any where in city and redoing the surface as specified and directed by Engineering In-charge. Using Concrete Batching and Mixing Plant
280
-
-
False ceiling : Providing and Fixing Mineral Fibre Acoustical Suspended Ceiling System with Dune (Bevelled Tegular) Edge Tiles of size 15mm Exposed Grid. The tiles should have Humidity Resistance (RH) of 99%,NRC 0.5, Light Reflectance 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Colour White, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 &7) in module size of 600 x 600 x 16mm , with Recycled content of 35 %. The tile shall be laid on precoated G.I.channel height 32 with 15 mm wide T - section flanges colour white having rotary stitching and XL2 CLIP on all T sections i.e. the Main Runner, 1200 mm and 600 mm Cross Tees with a web height of 32mm and a load carrying capacity of 7.57 Kilograms/M2 and pull out stength of minimum 100 Kilograms.. The T Sections have a Galvanizing of 90 grams per M2 and need to be installed with Suspension system. The Tile and Grid system used together should carry a 10 year warranty.approved as per GRIHA and BS 476 etc. complete. (flase ceiling)
370
-
-
PLUMBING
-
-
-
Providing and fixing 40mm diameter water meter with non-return valve including strainer,sockets/ union nut and including water meter box making locking arrangements and lock. [Without chamber]
1
-
-
Providing and fixing screw down for 40 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete.
20
-
-
Providing and fixing screw down for 25 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete.
30
-
-
Providing and fixing 25mm diameter concussion push button type brass/gun metal self- closing tap including necessary socket complete
10
-
-
Providing and fixing 45 cm wide mild steel ladder of 40mm x 6 mm mild steel flat stringers and steps of 18 mm dia. mild steel bar for water tank including fixing it in (1:2:4) M-15 cement concrete block 60cm x 30cm x 30cm and painting the ladder complete. (Anti Corossive Paint)
40
-
-
Providing and fixing White Glazed Earthenware full stall type Urinal with P.V.C. flushing cistern of 5 liters capacity with fitting, inlet pipes and stop tap, brackets for fixing the cistern, 32 mm dia. P.V.C flush pipe with fittings and flushing arrangement including lead soil pipe, lead trap, soil pipe connectionup to the outside face of the wall
4
-
-
Providing and fixing coloured glazed earthenware Wash Hand Basin of 63 cm x 45 cm size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connection including P.V.C. waste pipe and trap up to the outside face of the wall.
10
-
-
Providing and fixing Autoclosing pillar cock of pressmatic tap of approved makevor equivalent including all fixtures, fittings etc. complete.
10
-
-
Providing and fixing 8 cm C.I. Nahani Trap including C.I. grating bend and piece of C.I. pipe upto the outside face of the wall complete.
10
-
-
Providing and fixing 10cm C.I. Nahani Trap including C.I. grating bend and piece of C.I. pipe upto the outside face of the wall complete.
25
-
-
Providing and constructing Brick Masonry Inspection Chamber 90cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W.pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with R.C.C. Cover medium duty 140Kilogramwith frame etc complete.
7
-
-
Providing and constructing Brick Masonry Inspection Chamber 60cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with R.C.C. Cover medium duty 140Kilogramwith frame etc complete.
10
-
-
Providing and fixing P.V.C. Rain water pipes of 110mm outer diameter and having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592-1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and One Number ,filing the joint using rubber gasket with solvent cement and properly resting the shoeof pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete
535
-
-
Providing and fixing chromium plated towel rod 16 mm dia and 75 cm. in length including all accessories complete.
10
-
-
Providing and fixing 100 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete.
80
-
-
Providing and fixing 75 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete
80
-
-
Providing and laying in trenches 25 mm dai. CPVC pipe including necessary excavation, fittings. Refilling trenches etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.
320
-
-
Providing and laying in trenches 32 mm dai. CPVC pipe including necessary excavation, fittings. Refilling trenches etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.
200
-
-
Providing and fixing on walls /ceiling/ floor 40 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.
180
-
-
Providing and fixing on walls/ ceiling/ floor 50 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete.
70
-
-
Providing and fixing stainless steel sink of size 600 x 510 x 200 mm incluidng coupling, outlet pipe, elbow and other necessary fitting, finishing etc. complete
1
-
-
Providing and fixing C.P. Angular stop clock with wall flange of approved make continental including necessary sockets/union nut etc. complete.
10
-
-
Providing and fixing C.P.Two way BIB cock of approved make continental including necessary sockets/union nut etc. complete
20
-
-
Providing and fixing C.P. pillar cock long neck with aerator of approed make including necessary sockets/union nut etc. complete.
10
-
-
Providing and fixing C.P. sink cock with raised J" shaped swinging casted spout of approved make including necessary sockets/ union nut etc. complete."
5
-
-
Providing and fixing European type Colour glazed earthenware water closet pan with UPVC seat and lid with chromium plated brass hinges and rubber buffers including UPVC and vent pipe up to the outside face of wall 10 liter enameled low level flushing cistern with fittings pipe stop tap brackets for fixing cistern 32 mm dia. UPVC flush pipe with fittings and clamps ,20 mm dia.UPVC overflow pipe ,mosquito proof couplings G.I. chain and pulley,with water Jet and fitting including cutting and making good to the walls and floors testing etc. complete.( prior approval of sample and brand by Ex. Engineer is necessary before use)
4
-
-
Providing , constructing and fixing 600 mm dia. Inspection chamber made up of Polypropylene / polyethylene material Having 315 mm diameter inlet(s)/outlets and with eccentric reducers as per requirement to connect 160 mm and 200 mm pipes having thickness of 5 mm and 600 mm in height, with inbuilt shaft achieve the invert depth as per site condition of wall thickness of 5 mm having R.C.C. cover and frame fixing in 150 mm thick in c.c.1:2:4, having crushed sand bed of 150 mm thick of size 750 mm dia. Including excavation and refilling the sides of chamber by ?sand crushed cushioning 150 mm thickness, connecting all required UPVC fittings with rubber lubricant etc.complete
10
-
-
Providing , Laying and fixing, jointing Eco Drain 315 mm SN-04 Nu-Drain Upvc pipe or of equivalent make, manufacture as per EN 13476 or equivalent as per I.S.15328 & 16098 with fittings such a bends, tees, coupler, etc. jointing with rubber lubricant, including necessary excavation, trench refilling with selective excavated material etc. complete.
40
-
-
Providing and Fixing toilet set for differently Abled persons consist of Floor Mounted white vitreous china water Closet including 6 litre capacity white vitreous china flushing Cistern with raised soft-push button, white vitreous china wash basin of size 46 x 36 cm and one no SS 304 hinged rail 76 cms & three no SS 304of (Grab Bar) 60 cms all including cutting and making good the walls and floors wherever required ,seat cover, cistern & wash basin fittings,nuts, bolts and gasket etc complete as per the direction of Engineer-In-charge.
1
-
-
Grab bars-Providing SS grab bars set for accessible toilets comprising of 4 Nos. Grab bars as specified below.(1 Nos. wing grab bar + 1 Nos. L shaped grab bar + 2 Nos. straight grab bars = 1 typical set) 27a) Swing grab bar (1 Nos.) Providing a S.S. 304 SWING HANDICAP GRAB BAR - 700 mm and of DIA: 32MM and thickness 1.5mm of the roved brand and make. 27b) L Shaped grab bar (1 Nos.) Providing S.S. 304 L SHAPED DISABLED GRAB BAR of IZE-600MM (H) X 600MM (D) and 32MM DIA. and thickness mm of the approved brand and make. 27c) Straight grab bar (2 Nos.) Providing S.STEEL 304 GRAB RAIL (600 MM),32MM DIA. and thickness 1.5mm of the approved brand and make.
1
-
-
Providing and laying weep holes of 100 mm diameter PVC pipes as per drawing for abutment returns, return walls etc. Complete
120
-
-
Providing general pest control services to the building to control the nuisance of cockroaches, lizards, pin bores and other insects etc. with 4 operations in a year and monthly check up.
2130
-
-
Total Amount of PART (A) Civil Work (Rs.)
1
-
-
PART B - FIRE FIGHTING WORK
-
-
-
PUMP ROOM EQUIPMENT
-
-
-
SITC of Electric Motor driven Fire Pump set of 1650 LPM @70 m head with a) pump with bronze impellar, b)motor, c) coupling, d) base plate, e) foundation bolts matching flanges with gasket and fastners with all complete.
1
-
-
SITC of Diesel Engine driven Fire Pump set, of 1650 LPM @70 mtr.. head with a) pump with bronze impellar, b) engine, c) base plate, d) coupling with copuling guard, e) foundation bolts, f) automatic air release valve, g) fuel tank with engine exhaust line silencer, h) mating flanges with gasket and fastners, i) battery with battery charger including 100% standby, j) fuel filters alongwith fuel tanks.
1
-
-
SITC of Electric Motor drive Jockey fire pump set of 180 LPM @70 mtr.. head with a) pump with bronze impellar, b) motor, c) base plate, d) foundation bolts, e) mating flanges with gasket and fastners with all complete.
1
-
-
SITC of Electric Motor Starter Control Panel, Compartmentalised Floor mounted type, as per TAC requirement, for the Auto / Manual Operations of the above 2 Pump sets alongwith the Power & Control Cabling, from the Pump set Drives to Control Panel (each 8.0 M. length Max) with Earthing & Inter-locking, having, MCCB Switches, Meters, Fuses,Audio / Visual Alarms and Indicating Lamps, with Direct-On-Line Starters for Jokey Pump set & star delta operation for main pump Drives of Hydrant System,with Sequential Operation Circuitries.
1
-
-
SITC of Diesel Engine Starter Control Panel Solid-State, as per Spec. Wall mounted type for the Auto & Manual Operations of the Pump set, etc, alongwith the Battery Charger Power & Control Cabling from the Engine to Control Panel with Earthing & Inter-locking, having, Fuses AC / DC type, P.L.C. Based, Switches, Meters, Audio / Visual Alarms and Indicating Lamps, with Analogue Solid State Designs, with 3 Cold Impulses Starter for Deisel Engine of Standby Pumpset with Sequential Operation Circuitries.
1
-
-
INTRUMENTATION
-
-
-
SITC of Pressure Gauges with Syphon Tube and Cock 150mm Dial Range - 0 to 1Kg. /cm2.
4
-
-
SITC of Pressure Switches with Tubing, Control Cabling upto Panel, complete
3
-
-
SUCTION & DELIVERY PIPING,FITTING & VALVES
-
-
-
SITC of MS ERW Piping as per IS : 1239,part-I, heavy grade up to 150 NB and IS:3589, 6.35 mm thickness, including pipe fittings ,flanges, pipe supports such as c clamps, threded rods, fastners.
-
-
-
150 mm NB 6.3 mm thick
20
-
-
100mm NB 'C' Class
15
-
-
80mm NB 'C' Class
15
-
-
50mm NB 'C' Class
10
-
-
25mm NB 'C' Class
10
-
-
SITC of OS&Y Type Gate Valves of 200 psi rating with Matching Flanges, blots, nuts,washers, & gasket.
-
-
-
150mm NB
3
-
-
80mm NB
2
-
-
SITC of Non Return Valves with Matching Flanges, bronze internal,EPDM seat, 200 psi rating, suitable horizontal & vertical installtion.
-
-
-
150mm NB
2
-
-
80mmNB
1
-
-
SITC of Air Vessel Tank 300 NB x 1.2 mtr...
1
-
-
SITC of Ball Valve
-
-
-
50 NB
5
-
-
25 NB
6
-
-
SITC of 150 NB Fourway Fire Brigade Inlet Connection havong inbuilt non.return valve with 04 Nos. of 63 mm GM instantaneaous inlets for Fire Water Tank.
1
-
-
SITC of 25 NB Air Realease Valve
1
-
-
Structural Steel Support
800
-
-
Cabling from motor to Starter with copper earthing Strip within the pumphouse
150
-
-
HYDRANT SYSTEM
-
-
-
SITC of MS ERW Black Pipe as Per IS : 3589 / 6.3mm thick & IS 1239 / II 'C' Class, with fittings IS 1239/II heavy grade including MS plate fabricated flange to ASA 150 LBS rating with accessories plus consumable for Underground pipes protection with by coating & wrapping with anticrrosive tape complete with required structural support if any as per spec
-
-
-
150mm NB 'C' Class
18
-
-
SITC of MS ERW Black Pipe as Per IS : 3589 / 6.3mm thick Gr. Fe 410 & IS 1239 / I- 'C' Class, with Fittings to suiitable pipe Fabricated IS : 3589 / 6.3mm thick / IS : 1239 / II - Heavy Grade, including MS Plate Fabricated Flanges to IS / DIN / ASA 150 LBS rating & Aboveground Pipe Protection (Painting)and all required 'supports etc.
-
-
-
150mm NB 'C' Class
100
-
-
100mm NB 'C' Class
6
-
-
80mm NB 'C' Class
6
-
-
SITC of Butterfly Valves of 200 psi rating with Matching Flanges, blots, nuts,washers, & gasket.
-
-
-
150 NB
5
-
-
100 NB
1
-
-
SITC of oblique type stainless steel single headed hydrant valve with 63mm female instantaneous outlet angled towards ground as per IS 5290-Type A, including matching flanges, bolts, studs, nuts, washers, gaskets.
-
-
-
External
4
-
-
Internal
4
-
-
SITC of M. S. Hose Box of size 750 x 600 x 250mm-16swg thick fire red color from outside & white enamal from inside - front glass paited with " fire " with key, handle and brass hinges -to accommodate 2 Nos. of 15mtr.. long hose and 1 branch pipe.
-
-
-
External
4
-
-
Internal
4
-
-
SITC of 63mm dia stainless steel universal branch pipe as per IS 2871
8
-
-
SITC of Fire fighting hose as per IS 14933 ( Type -A) . The fire hose shall be 15 mtr.. long with 63mm dia stainless steel couplings at both end.
-
-
-
15m Long
16
-
-
SITC of GM air release valve .
-
-
-
25mm NB
1
-
-
SITC of swinging type M .S. Hose Reel drum of red powerd coated finish with 30 mtr.. x 25mm Dia rubber hose as per IS 884.
4
-
-
SITC of Ball Valve 25NB
4
-
-
SITC of 150NB Four way Siamese Connection for hydant network with 4 Nos. of 63 mm instantaneaous inlets in glass fronted wall box having inbuilt non return valve and 150mm BFV with fittings,nut,bolts & washers.
2
-
-
SITC of RCC hume pipe NP3 class (300 mm dia) with class collar & joining material for road crossing
20
-
-
Structural Steel Support
1200
-
-
FIRE EXTINGUISHER QUANTITIES
-
-
-
DCP TYPE 9.00 Kg. extinguisher
2
-
-
CO2 TYPE 9.00 Kg. extinguisher
2
-
-
FOAM TYPE 9.00 Kg. extinguisher
2
-
-
ABC 6.00 Kg. extinguisher
10
-
-
CO2 TYPE 4.00 Kg. extinguisher
10
-
-
Fire Buckets Set ( 04 Buckets in one set )
2
-
-
Safety Signages for staircase and evacuation
20
-
-
ADDRESSABLE FIRE ALARM SYSTEM
-
-
-
SITC of addressable panel 2 Loop
1
-
-
SITC of active repeater panel with required battry backup UL /ENlisted.(Security Cabin)
1
-
-
Addressable Manual Call Point with mounting base and junction box.
7
-
-
Addressable Hooter
7
-
-
Addressable Control Module
7
-
-
Addressable Multicriteria Detectores
40
-
-
SITC 2Cx1.5Sq.mm PVC insulated Armoured cable with required mouting accessories like base saddles etc..
1600
-
-
Total Amount of PART (B) (Rs.)
1
-
-
PART C - ELECTRICAL WORK
-
-
-
Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 150 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL
2600
-
-
Supplying and laying HMS PVC conduit FRLS grade 32mm dia. With necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC.
1035
-
-
Supplying and erecting HMS PVC conduit FRLS grade 32 mm dia. With PVC accessories on wall / ceiling as per specification No: WG-MA/CON.
555
-
-
Supplying and erecting LED square / circular Max. 7W down lighter/ Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 770 Lumens, min. efficacy of 110 lumen/W,CRI80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%,THD10%, p.f. 0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty.
555
-
-
Supplying and erecting LED square / circular Max. 14 W down
lighter/Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 1500 Lumens, min. efficacy of 110 lumen/W, CRI80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD10%, p.f. 0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty.
158
-
-
Supplying and erecting LED square / circular Max. 18 W down lighter/
Panel Light having pressure die-cast aluminium housing,polystyrene diffuser having system lumens output of Min. 2000 Lumens, min. efficacy of 110 lumen/W, CRI80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD10%, p.f. 0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty.
15
-
-
Supplying and erecting Concealed type foot/step light Max. 5W having IP67.IK10 rated Pressure die cast housing having system lumens output of Min. 500 Lumens, min. efficacy of 100 lumen/W, CRI80, CCT upto 5000K, Beam Angle of 110 deg., THD10%, SDCM5, p.f. 0.95, operating range of 230-270V, surge protection of 2.5 kV, Life class of 25,000 Hrs. at L70B50, including driver by making necessary arrangement/recess in wall to make it flush with surface with 2 Year warranty.
180
-
-
Supplying and erecting CRCA powder coated corridor / passage light LED fitting (4 feet) Max. 33W with high transitivity diffuser with system lumens output of Min. 4000 lumens , min. efficacy of 120 lumen/W, CRI80, CCT upto 6500K, Beam Angle of 120 deg., Ripple5%, THD10%, p.f. 0.95, operating range of 120-270V, surge protection of 4 kV, Life class of 50,000 Hrs. at L70B50, including driver, with end caps on provided PVC Block / wooden board with 3 years warranty.
45
-
-
Supplying and erecting CRCA powder coated corridor / passage light LED fitting (4 feet) Max. 50W with high transitivity diffuser with system lumens output of Min. 6000 lumens , min. efficacy of 120 lumen/W, CRI80, CCT upto 6500K, Beam Angle of 120 deg.,e5%,THD10%, p.f. 0.95, operating range of 120-270V, surge protection of 4 kV, Life class of 50,000 Hrs.at L70B50, including driver, with end caps on provided PVC Block / wooden board with 3 years warranty.
15
-
-
Providing temporary illumination consisting of LED rope light having 4 to 6 Wcapacity per meter [multi colour] and consisting suitable power adaptor with mains, switchgears erected and dismantled with using scaffolding and maintaining the same up to 3 days
60
-
-
Supplying and erecting LED Panel Light(600mm X 600mm) Max. 35 W having CRCA powder coated housing, polystyrene diffuser having system lumens output of Min 4200 Lumens, min. efficacy of 120 lumen/W, CRI80,CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD10%, p.f.0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50 including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty.
50
-
-
Making suitable size recess in any type of false ceiling for erection of flush type down lighter and finishing the background to match the original surface upto 20W.
200
-
-
Supplying & erecting integral post top lantern fixtures (mushroom type) suitable for LED lamp upto 12 W consisting of clear acrylic top cover, cast aluminium pole cap complete with accessories on provided pole /bracket as per specification no. FG-ODF/PTL
100
-
-
Supplying & erecting 10-12W, 230V integral type LED Lamp suitable for B-22 / E-27 base.
100
-
-
Providing and Fixing 60W Wall light P65, CCT 3000K- Supply, installation, commissioning of wall light with 45 deg upplight and 20 deg downlight preferably shape, UV grade power coating, Aluminium heat sink to maintain Tc,85 deg C, IP 65. System Efficiency 100 Lm/W, 70 CRI.
40
-
-
Providing and Fixing 24W Wall light P65, CCT 3000K- Supply, installation, commissioning of wall light with 120 deg upplight and 20 deg downlight preferably shape, UV grade power coating, Aluminium heat sink to maintain Tc85 deg C, IP 65. System Efficiency 100 Lm/W, 70 CRI.
40
-
-
Providing and Fixing 10W decorative Wall lights- Decorative wall light, with side and top illumination.
90
-
-
Providing and Fixing 40W, 30deg, Linear light 1000mm max IP65, CCT 5000K-Supply, installation, commissioning of linear flood light with 20 deg beam angle, Aluminium heat sink, IP 65. System Efficiency 100Lm/W, 70 CRI.
90
-
-
Providing and Fixing 40W, 15deg, Linear light 1000mm max IP65, CCT 3000K-Supply, installation, commissioning of linear flood light with 20 deg beam angle, Aluminium heat sink, IP 65. System Efficiency 100Lm/W, 70 CRI.
25
-
-
Supply, Installation, Testing and Commissioning of LED RGB/RGBW floodlighting luminaire for facade lighting with Die-cast aluminium housing, powder-coated finish, of following wattage. Luminaire shall be capable of producing dynamic color changing light for with 16 million colors by DMX/Ethernet based control. The beam angle of the fitting shall be narrow, medium, wide or asymmetric as per the requirement. Luminaire shall be complete with driver and capable of operating at line voltage without any separate power supply from 100-270 V AC, 50 Hz with power factor 0.9 . Fixture shall be suitable to operate at an ambient temperature range of - 10°C to +50°C and shall be IP 65 and IK 06 rated. Lifetime shall be at least L70:50000 burning hours at 50°C. Luminaire shall be conforming to BIS (IS 10322) and shall be complete with all necessary accessories required for proper working of fixture including weather proof connection cables, water proof connectors etc. as required.
-
-
-
90w
15
-
-
40 W
15
-
-
30W
15
-
-
Providing and fixing Strip light – Supply, installation, commissioning of Encapsulated flexible, IP 65, CCT 5000K, 10W/M, with efficient thermal management
100
-
-
Providing and fixing 36W Inground light- Supply commissioning of inground light with 30 deg upplight, Aluminium heat sink to maintain Tc 85 deg C, IP 65. System Efficiency 80 Lm/W, 70 CRI.
80
-
-
Providing and Fixing 14W glair less Downlight – Supply, commissioning of downlight Recessed fixed Downlight Power consumption: - 13.9/ 193. Beam Angle: - 46 degree Glare Cut angle: - 40 degree Colour Temperature: - 4000K
50
-
-
Providing and Fixing 10W Recessed Glare less Adjustable Downlight– Beam Angle: - 30 degree Glare Cut angle: - 40 degree Colour Temperature: - 3000K
20
-
-
Providing and Fixing Suspended Up-Down-Up Down (70% up & 30% Down)Beam Angle: - 30 degree Glare Cut angle: - 40 degree Colour Temperature: - 3000K
10
-
-
Providing and Fixing 20 W Decorative lights- Decorative corner lights, Hanging / floor standing, with side and top illumination
30
-
-
Providing and Fixing 5W Surface downlight - supply IP 65 surface mount downlight, Beam angle 45 deg, compact, inbuilt driver, UGR 19, system efficiency 100 Lm/W
60
-
-
Supplying and erecting Energy Saving BLDC Ceiling fan 230 V A.C. 50 cycles 1200 mm, max. energy consumption of 28W having service ratio (CMM/W) of Min. 8 , PF0.9, THD10% with IR remote control/compatible speed regulator, Temperature Rise of Max. 40 deg. C, having external mounted control PCB completely erected in position as per specification no. FG-FN/CF
24
-
-
Supplying and erecting fan hook of 10 mm. M.S. round bar grouted in RCC slab with making the site as original.
24
-
-
Supplying and erecting exhaust fan heavy duty 230 V A.C. 50 cycles 375/380mm. 1400 RPM complete erected in position as per specification no. FGFN/EXF
12
-
-
Supplying and erecting modular type USB Charger socket of 1 Module with nominal output voltage of 5V DC ±5% and nominal output current of 5 V -750 mA , duly erected on provided plate and box with wiring connections complete.
50
-
-
Supplying & erecting UV Fly killer/ bug catcher Light Fitting having 2 x
20W UV Tube Lights to cover min. area of 500 sq.ft with powdered coated M.S./ steel body suitable to work on 230V, AC Supply having top mounting arrangement with SS chain complete and 3 core 1 mtr. flexible wire with 1 year warranty.
15
-
-
Supplying and erecting modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete.
265
-
-
Supplying and erecting modular type switch 16A duly erected on provided plate and box with wiring connections complete.
140
-
-
Supplying and erecting modular type switch one way 16 / 20 A, duly erected on provided plate and box with wiring connections complete with neon indicator.
33
-
-
Supplying and erecting modular type Two way switch 6A / 10A (2 Module), duly erected on provided plate and box with wiring connections complete.
50
-
-
Supplying and erecting modular type bell-push with indicator 2 modules 6A /10A, duly erected on provided plate and box with wiring connections complete.
33
-
-
Supplying and erecting modular type bell indicator, duly erected on provided plate and box with wiring connections complete.
33
-
-
Supplying and erecting modular type buzzer 220 / 250V, duly erected on provided plate and box with wiring connections complete.
33
-
-
Supplying and erecting 16 / 20 / 25 A starter (modular range) 2 module for AC unit on provided box complete & duly concealed with necessary material and connected.
24
-
-
Supplying and erecting 6 to 32 A, 10kA, SPMCB suitable to fix in 1 module of modular switch in provided box complete & duly concealed with necessary material and connected.
75
-
-
Supplying and erecting 16 to 32 A, 10kA, DPMCB suitable to fix in 2 module of modular switch in provided box complete & duly concealed with necessary material and connected.
75
-
-
Supplying, erecting & commissioning 4 pole RCCB 40A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW RCCB/RCCB
10
-
-
Supplying, erecting & commissioning 4 pole RCCB 63A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB
10
-
-
Supplying, erecting & commissioning 4 pole RCCB 80A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB
10
-
-
Supplying, erecting & commissioning 4 pole RCCB 100A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB
10
-
-
Supplying and erecting modular type 3 pin 6A multi socket with safety
shutter, duly erected on provided plate and box with wiring connections
140
-
-
upplying and erecting modular type 3 pin 6 / 16A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete.
47
-
-
Supplying and erecting modular type T.V. socket single outlet, duly erected on provided plate and box with wiring connections complete.
7
-
-
Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 1 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.
50
-
-
Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 2 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.
80
-
-
Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 3 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.
28
-
-
Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 4 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.
45
-
-
Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 6 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.
45
-
-
Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 8 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.
15
-
-
Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 12 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.
15
-
-
Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 16 / 18 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.
15
-
-
Supplying and erecting white footlight with 4 modules concealed modular box and LED lights with cover complete erected on wall /flush to wall with necessary chiselling in wall and finishing with cement and mortar / POP as per required and duly connected.
29
-
-
Supplying and erecting PVC Surface modular double mounting plate 1 module complete duly erected.
55
-
-
Supplying and erecting PVC Surface modular double mounting plate 2 module complete duly erected.
80
-
-
Supplying and erecting PVC Surface modular double mounting plate 3 module complete duly erected.
33
-
-
Supplying and erecting PVC Surface modular double mounting plate 4 module complete duly erected.
45
-
-
Supplying and erecting PVC Surface modular double mounting plate 6 module complete duly erected.
45
-
-
Supplying and erecting PVC Surface modular double mounting plate 8 module complete duly erected.
15
-
-
Supplying and erecting PVC Surface modular double mounting plate 12 module complete duly erected.
15
-
-
Supplying and erecting PVC Surface modular double mounting plate 16/18 module complete duly erected.
15
-
-
Supplying and erecting mains with 2x1.5 sq.mm FRLSH copper PVC
insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW
1530
-
-
Supplying and erecting mains with 3x2.5 sq.mm FRLSH copper PVC
insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW
6120
-
-
Supplying and erecting mains with 3x4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW
1530
-
-
Supplying and erecting mains with 3x6 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW
766
-
-
Supplying and erecting mains with 3x10 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW
250
-
-
Supplying, erecting, testing and commissioning of diesel generating set with alternator of 180 kVA output continuous rating, 3 Phase, 415 V, 50c/s 0.8 p. f.A.C supply, a totally enclosed air cooled / liquid cooled multi-cylinder diesel engine developing suitable BHP at 1500 rpm with 10% overload for 1 hour in 12 hours, along with standard accessories, self-excited, self-regulated, screen protected alternator with static excitation system running at 1500 RPM as per IS4722-2001 with voltage regulation +/- 5 %, with performance class G2 and
maximum fuel consumption 30.9 Ltr/hr @75% loading. Both the engine and alternator direct coupled on a common fabricated steel base frame and mounted on anti-vibrating pads with standard control panel comprising meters, switchgears,indicators connected with suitable wires/cables, the complete set enclosed in composite Acoustic enclosure as fully assembled integral unit made of 16 SWG
CRCA Sheet, sound absorbing material to restrict sound level up to 75 dB at 1.0 m, provided with first filling of oil, diesel not less than 230 Ltr etc. on provided M20 Grade CC Foundation as per specification no. GEN-DG
1
-
-
Providing earthing with copper earth plate size 60 x 60 x 0.315 cm with funnel with a wire mesh for watering and brick masonry block C.l. cover with minimum 25 kg Carbon based environment friendly back fill Ground Enhancing compound complete with all materials, testing & recording the results as per specification no ESE -LA
10
-
-
Supplying and erecting static energy meter with 3 x 240V 50 Hz. AC supply 10 to 60 A, ISI mark, accuracy class 1.0 with backlit LCD display, (Measuring and display Trivector, V, I, kW, PF, Hz, Last month history of kWh and MD in kW) with special features like TOD, Tamper logging, Optical Communication Port & Display in absence of Power & with transparent hinge type box complete erected on polished teak wood board duly wired with required size of weather proof PVC wires duly tested by electric supply company
1
-
-
Supplying & erecting Minimum three & above star rated Centrifugal water pump (Monoblock), 415V, three phase 50 cycles A.C. supply of 1.5 KW/2 HP with discharge 600/140 Litres per Minute (LPM) for head of 8/22 m and 50 mm suction/ 40 mm delivery pipe on provided C.C. foundation as per specification No. WP-CGP
2
-
-
Supplying & erecting Pressure Booster Pump, single phase, 50C/s, A.C. supply of 1.125 KW/1.5 H.P., With discharge of 480 to 31 LPM for 10 to 50 Mtr Head & 25 mm suction/ 25 mm delivery pipe, for Domestic Pressure boosting applications.
2
-
-
Supplying & erecting flat flexible 3 core 6 sq.mm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete.
50
-
-
Supplying & erecting Water level controller 230/415 V, A.C. , Two way under ground tank operation only.
2
-
-
Supplying & erecting automatic control panel for 3 Phase , 415 volt, A.C, Submersible/centrifugal pump set up to 7.5 HP consisting of DOL starter having relay range 9-14 AMP,S.P.P.,Combined ammeter/ voltmeter, phase indicating lamp enclosed in CRCA powder coated Vibration proof enclosure with IP 54 protection. Control Panel should offer single phasing, phase reversal, phase imbalance etc .
1
-
-
Supplying & erecting triple pole and neutral distribution board (TPNDB), 3 pole/4 pole MCCB as incomer & outgoing SP MCB (36 poles) or TP MCB of 12 ways (36 poles), with door, 1.2mm thickness, surface/flush mounted, on iron/GI frame (vertical busbar type) as per specification no. SW-SWR/MCBDB1
1
-
-
Supplying and erecting single pole and neutral distribution board (SPNDB), with 2 ways for incoming and 10 ways (10 poles) for outgoing SP MCBs, with door, 1.2mm thickness surface / flush mounted, IP 43 Protection on iron / GI frame as per specification no. SW-SWR/MCBDB
1
-
-
Single Arm stree light pole of 7 meter height: Supply, Installation, Testing & Commissioning of all in one integrated LED solar streetlight consists of solar photovoltaic module, battery, battery management system, control electronics, LED driver, PIR sensor, inter-connecting cables and pole mounting piece integrated into the luminaire as a single unit. Solar street light with IP65 ingress protection having a system wattage not more than 26W with minimum 4500 lumen output, 60Wp high efficiency monocrystalline solar panel, highly efficient MPPT based charge controller and 12.8 V, 30 Ah IP68 Lithium Ferro Phosphate(LiFePO4) battery with proper battery management system. LED lumen efficacy shall be at least 180lm/W and LED driver should have 90% efficiency. Typical correlated colour temperature should be 5700K with CRI70. It should have a PIR sensor to ensure battery optimisation with help of a suitable dimming profile. The luminaire should be housed in IK 08 impact resistance certified aluminium pressure die cast housing with anti-corrosive coating and must have a UV stabilized polycarbonate cover. The luminaire shall have a specially designed pole mounting piece that enables lateral as well as post top mounting and installation at varying tilts from 0 to 15 degrees for optimal light distribution. Company LOGO shall be Embossed. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters. Fixture should have BIS as per the Govt. rule and the certificate needs to be submitted during the bid submission. It should include 5 meter Octagonal Poles as mentioned in Technical Specifications. Octagonal Poles shall be designed as per ILE TR7 & BSS649 for Structural design & as per IS875 (Part III), 1987 dynamic loading. The Pole shaft shall be made single piece Hot dip galvanized continuously tapered having Octagonal cross section. The welding will be done as per BS5135/IS9595. No circumferential welding shall be allowed in the poles shaft. The structure shall be single hot dip galvanized as per BS729/IS 2629. A structure shall be provided at approximate 700MM height from the pole base. Foundation accessories will be as per IS1367.I/c required
40
-
-
Supply, Installation, Testing and Commissioning of ongrid Solar Photovoltaic Power Plant conforming to MNRE specifications as amended, consisting of Mono/Poly Crystalline silicon solar cells, net metering facility, necessary protections, earthing, mounted on Aluminium/GI structure of suitable strength with following components complete as required:-
a) Roof Top Solar System of 50kw, Solar Photovoltaic Module of capacity 330 Wp or above, manufactured in India, conforming to IS 14286/IEC 61215, IS/IEC 61730-Part-1, IS/IEC 61730-Part-2. Solar Photovoltaic Module conversion efficiency shall not be less than 16.5%. PV modules used in solar power plants/ systems must be warranted for their output peak watt capacity, which should not be less than 90% at the end of 10 years and 80% at the end of 25 years.
b) Power Conditioning Unit (PCU) of 350-800 V DC Input voltage range and 400 V AC,three phase, 4 wire, 50Hz +/- 2.5 Hz, output voltage suitable to generate AC Power with efficiency not less than 97%, total harmonic distortion less than 3% and suitable for ambient temperature from 0 to 50 degree C. The PCU shall adjust the voltage and frequency level to suit the Grid Voltage Frequency.
c) Data Monitoring System complete with accessories.
d) Fixing of Array junction box & Main junction box with IP 65 protection and termination arrangement for incoming and outgoing cable along with glands, lugs and other accessories etc. as required.
e) Lightning and surge voltage protection.
f) Connections & Interconnections by supplying & fixing required size XLPE insulated copper conductor 1.1 kV grade armoured power and control cables between solar modules, main power cable to grid supply PCU unit along with supplying & fixing of necessary channel/conduit lugs and other accessories etc. as required
850
-
-
Supplying and erecting 12.5 m (clear height) motorized high-mast (Top -150mm,Bottom- 360mm) hot dipped galvanized material with average minimum thickness 65 micron, made from high tensile structure grade steel as per BSEN - 10025 S355/E350 & 3mm thickness, with base plate 25 mm thick x OD 520 mm grade as per IS-2062, pole made in single section & submerge arc welded, with lowering & raising motorized unit, wire rope stainless steel 316 grade 2 nos., 7x19 construction 5mm, SG-DG U clamps, double drum with assembly 250 kg, 5x2.5 Sq.mm. flexible copper cable with lantern carriage assembly suitable for max. 12 nos. luminaires and its control gear box, lightning arrestor, arrangement for fixing aviation light, high-mast with serial number, factory inspection report/test report of high-mast should be provided as per specifications on provided foundation J type stud/bolts with necessary accessories complete as per specification no. OHPL/ HM (excluding luminaries)
2
-
-
Design,manufacture,supply,erection, testing and commissioning of machine room less, gearless, traction elevator of capacity 680 kg minmum (10 persons) For (G+4) storeyed Building with the following specifications: Location of Lifts : Inside the building i) Speed : 1.0 to 1.25 MPS minimum ii) Floors : 5 floors including GF iii) Travel : 19.50 mtrs iv) Stops & opening: 5 stops & 5 opening a) Car : Stainless steel scratch proof (Honey Combing finish) b) Landing doors : Stainless Steel brushed finish c) Flooring 18-20mm Granite flooring, etc. as directed by EIC. (Detailed technical specifications are provided seperatly.)
1
-
-
Metering panel for 10 nos of consumers,150 A,4-pole MCCB incomer,32 Amp DP MCB for outgoing.
1
-
-
250 amp, 4-pole MCCB with it's housing panel for outdoor use for tapping supply from LT feeder piller near E1 substation inside port
1
-
-
Supplying & erecting street light control panel outdoor type, for three phase 4 wire system having in built astronomical adjustable programmable timer with minimum 5 years battery back up, having IP54,IK10 protection, 4 pole
contactor up to 60A, with maintenance mode to switch ON street lights during time of repairs with energy consumption data recording for analysis and LCD
display for energy monitoring with numeric key pad in provided bo
1
-
-
Power saving sensors
1
-
-
Supplying, erecting, testing and commissioning of microprocessor based AMF panel suitable for diesel generating set of above 180 kVA up to 200 kVA capacity Three phase, 415 Volts, 50Hz A.C. with all standard features, safeties etc
1
-
-
Total Amount of PART (C) (Rs.)
1
-
-
PART D - NETWORK AND TELEPHONE SYSTEM
-
-
-
PART A: CCTV
-
-
-
Supply, installation, esting and commissioning of 5 Megapixel Full HD Indoor Fixed Dome camera
20
-
-
Supply, installation, testing and commissioning of 5 Megapixel Full HD outdoor Fixed Bullet camera
10
-
-
Supply, installation, testing and commissioning of 4 Megapixel PTZ Camera , 30X optical & 16X digital Zoom
3
-
-
Supply, installation, testing and commissioning of 48 IP Channels NVR with 48TB Hard Disk
1
-
-
Supply, installation, testing and commissioning of 49 Inch UHD Monitor
2
-
-
Supply, installation, testing and commissioning 12U Rack wall Mounting
4
-
-
POE Edge Switch 16 Port
4
-
-
Supply, installation, testing and commissioning of 3KVA Online UPS
1
-
-
Supply,installation, laying and commissioning Cat 6 UTP cable
2500
-
-
PART B: PA SYSTEM
-
-
-
SITC ceiling/wall mounted 6W speaker with line matching transformer including necessary accessories (Make.- Bosch or Equivalent )
10
-
-
Supply of Booster Amplifier for PA system with RMS output (actual) 480 W . 480W,Power reduction on backup
power -1 dB,Frequency response ,60 Hz to 18 kHz (+1 / -3 dB at-10 dB ref. rated output,Distortion,1% at rated output, 1 kHz,Max power consumption 1600 VA, Multiple outputs - 70 V / 100 V and 8/4 ohm,Temperature controlled forced front to back ventilation, directly stackable , (Make.- Bosch or Equivalent )
1
-
-
SITC of Speaker 2 core X 1.5 Sqm.m shielded Audio cable. (Make.- Polycab or Equivalent )
200
-
-
Supply, Installation of 12 U rack for PA system
1
-
-
Table Top microphone with mounting stand (Make.- Bosch or Equivalent)
1
-
-
PART C: NETWORKING & TELEPHONE SYSTEM
-
-
-
Supply,installation, laying and commissioning Cat 6 UTP cable with accessories i.e.conduit pipe,clamp etc.
2500
-
-
Supply, Installation testing and commissioning RJ-45 Cat-6 Information Outlet with face plate with accessories i.e.conduit pipe,clamp etc.
35
-
-
Supply,installation, laying and commissioning Cat 5E UTP cable with accessories i.e.conduit pipe,clamp etc.
800
-
-
Supply, Installation testing and commissioning RJ-11 Information Outlet with face plate
10
-
-
Supply, Installation testing and commissioning Cat-6 Patch cord 2 meter at user end
10
-
-
Supply, Installation testing, jumpering and commissioning 100 +100 Pair MDF Box with krone module
1
-
-
Supply, Installation testing Jumpering and commissioning 50 + 50 Pair MDF Box with krone module
2
-
-
Supply, Installation testing and commissioning 100 Pair riser Cable with termination,punching & jumpering of telephone cable
100
-
-
Supply, Installation testing and commissioning 12U Wall Mount Rack.
3
-
-
Supply, Laying, termination & Commissioning of RG-6 TV CABLE
100
-
-
Supply, Installation, Termination & Commissioning of TV socket termination box with blank PVC cover plate and GI Box .
4
-
-
Total Amount of PART (D) (Rs.)
1
-
-
PART E - HVAC WORK
-
-
-
HI SIDE WORKS
-
-
-
OUT DOOR UNITS
-
-
-
44 HP
1
-
-
INDOOR UNITS
-
-
-
Ceiling Mounted High Static Ductable with Corded Remote
-
-
-
8.2 TR
2
-
-
Four Way Cassette Unit with Cordless Remote
-
-
-
4.00 TR
3
-
-
3.00 TR
1
-
-
One Way Cassette Unit with Cordless Remote
-
-
-
2.00 TR
2
-
-
1.65 TR
1
-
-
1.00 TR
2
-
-
Refenet
10
-
-
CRC Centralized Remote Controller
1
-
-
Air Curtains
2
-
-
LOW SIDE WORKS
-
-
-
Insulated Refrigerant t Piping
-
-
-
Copper Piping for VRF SYSTEM
420
-
-
Make: Copper Pipes-Mandev /Rajco /Equivalent, Insulation-Armaflex/Aeroflex
-
-
-
Interconnecting Eletrical Cabling
-
-
-
Make: Polycab.
-
-
-
Electrical Cabling for VRF System
585
-
-
Insulated Hard PVC Drain Piping For VRF System
-
-
-
40mm Dia
50
-
-
32mm Dia
110
-
-
25mm Dia
50
-
-
Make: Prince with Superlon/Armaflex Nitrile Rubber Tubes.
-
-
-
Indoor Hangers
-
-
-
Ductable & Cassette Units
11
-
-
MS Stands
-
-
-
Outdoor Unit "L" /Table Type
3
-
-
Refenet Joints (Y)
10
-
-
GI Ducting
-
-
-
24G GI Ducting
4000
-
-
Insulation
-
-
-
13mm Nitrile Rubber Class O, Thermal Insulation
3150
-
-
10mm Armasound Class O, Accoustic Insulation
1000
-
-
Air Distribution System
-
-
-
Linear Alluminium Grills
35
-
-
Volume Control/Collar Dampers
10
-
-
Canvas Connection
2
-
-
Supply Air Diffusers with Voiume Control Damper
10
-
-
Return Air Diffusers with Voiume Control Damper
8
-
-
Jet Nozzle
16
-
-
Disk Valve
15
-
-
Outdoor Cowl Piece with Bird Screen
3
-
-
Refrigerant Gas
-
-
-
FOR VRV SYSTEM
1
-
-
Labour Charges For the Installation,Testing & Commissioing of following items
-
-
-
OUT DOOR UNITS
-
-
-
44 HP
1
-
-
INDOOR UNITS
-
-
-
Ceiling Mounted High Static Ductable with Corded Remote
-
-
-
8.2 TR
2
-
-
Four Way Cassette Unit with Cordless Remote
-
-
-
4.00 TR
3
-
-
3.00 TR
1
-
-
One Way Cassette Unit with Cordless Remote
-
-
-
2.00 TR
2
-
-
1.65 TR
1
-
-
1.00 TR
2
-
-
ITC of CRC
1
-
-
ITC of Air Curtains
2
-
-
Underdeck Insulation
-
-
-
19mm thick Nitrile Rubber Insulation
3000
-
-
ODU Cable
-
-
-
44 HP ODU Cable
60
-
-
Kitchen Ventilation Fan
-
-
-
800 CFM, 20mm Static Exhaust Fan
1
-
-
600 CFM, 20mm Static Fresh Air Fan/ IDU Fresh Air Also
3
-
-
Cable Tray
-
-
-
300mm x 50mm
200
-
-
250mm x 50mm
150
-
-
G.I. Earthing
100
-
-
ODU Stater Panel
2
-
-
MCB / ELCB
1
-
-
LABOUR CHARGES FOR THE LIFTING, SHIFTING & TRANSPORTATION CHARGES
1
-
-
Total Amount of PART (E) (Rs.)
1
-
-
PART F - LANDSCAPING AND DECORATIVE PLANTS
-
-
-
Supplying and stacking of good earth at site including royalty and carriage upto 5 km lead complete (earth measured in stacks will be reduced by 20% for payment)
625
-
-
Supplying and stacking at site dump manure from approved source, including carriage upto 5 km lead complete (manure measured in stacks will be reduced by 8% for payment).2.4.1 Screened through sieve of I.S. designation 20 mm
255
-
-
Grassing with selection No. 1 Doob grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn, free from weeds and fit for mowing including supplying good earth, if needed (the grass and good earth shall be paid for separately). 2.10.2 With grass Turf
380
-
-
Providing and stacking of Cassia fistula (Amaltash) of height 120-135 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.
40
-
-
Providing and stacking of Mimusops elengi (Maulsri) of height 180-195 cm., well developed with thick stem in big in big size HDPE bag as per direction of the officer-in-charge.
45
-
-
Providing and stacking of Lagerstroemia flosreginae of height 150-165 cm.in big poly bag of size 25 cm as per direction of the officer-in-charge
45
-
-
Providing and stacking of Alstonia scholaris of height 150-165 cm. in bag of size 25 cm as per direction of the officer-in-charge
40
-
-
Providing and stacking of Nauclea cadamba (Kadam) of height 150-165
cm. in big poly bag of size 25 cm as per direction of the officer-in-charge
40
-
-
Providing and stacking of Tamarindus indica (Imli) of height 120-150 cm. in big polybags of size 25 cm as per direction of the officer-in-charge
40
-
-
Providing and stacking of Bauhinia purpurea (Kachnar) of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.
40
-
-
Providing and stacking of Saraca indica (Sita Ashok) of height 105-120 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge
40
-
-
Providing and stacking of Plumeria rubra of height 120-150 cm. with 3-4 branches and thick stem in big size HDPE bags as per direction of the officer-in-charge.
40
-
-
Providing and stacking of Nerium oleander variegated of height 60-75 cm., multibranched in earthen pots of size 25 cm as per direction of the
officer-in-charge.
40
-
-
Providing and stacking of Nyctanthes arbor-tristis (Hasingar) of ht. 90-105
cm in Earthen pots of size 20 cm as per direction of the officer-in-charge
40
-
-
Providing and stacking of Bougainvillea (Variety Butiana, Lady Mary Baring, Mahara, Mohan, Scarlet Queen, Variegated, Glabra Formosa, Peruviana Odissi, Paratha, Subhra,Thimma, Spectabilis L.N Birla, Refulgens) of height 30 cm. to 45 cm. with 2-3 branches in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge
40
-
-
Providing and displaying of Seaforthia Palm having ht. 1.50 m to 1.80 m with 12-15 suckers, well developed, fresh and healthy lush green leaves from bottom to top in 30 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge.
45
-
-
Total Amount of PART (F) (Rs.)
1
-
-
PART G - MISCELLANEOUS WORKS
-
-
-
Unbranded 1 - seater portable toilet 915mm X 435mm X 1955mm with Sludge tank(Capacity 200 Ltrs) with 75mm outlet facility through butterfly valve and hosepipe(for 1-seater and 2-seater)
2
-
-
Providing and Laying hot applied thermoplastic road marking strip on Bituminous Surface of specified shade/ colour of 2.5 mm thick including 1.5 Refractive index reflectorizing glass beads @ 250gm/sqm .Thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC 35:2015. Initial Dry reflectivity RL shall be 250 mcd/sqm/lux measured in the initial 7 days and sustained reflectivity RL of 100 mcd/sqm/ lux and Qd of 100 mcd/sqm/ lux measured at the end of 2 years by means of a Standard Reflectometer of Zehntner, Easylux, Delta make capable of measuring RL & QD both according to IRC 35:2015 clause 15.5. The finished surface to be level, uniform, and free from streaks and holes complete as per direction of Engineer-in-charge and in accordance with applicable specifications.(Refer MORTH Clause 803 for technical Specification and Performance for IRC 35:2015).
100
-
-
Providing and fixing seat out mode up of composite wood having dimensions shown in attached drawing including all tools, tackles, labors, machineries, molding, fabricating, transporting & installation etc. complete as directed by EIC.
-
-
-
Providing and fixing benches made up of composite wood FRP Top, bottom made of M-40 grade reinforce concrete block precast/cast-in-situ having dimensions shown in attached drawing including all tools, tackles, labours, machineries, moulding, fabricating, transporting & installation etc. complete as directed by EIC.
21
-
-
Logo
-
-
-
Providing and fixing JNPA’s logo of dimension as shown attached dwg. fabricated of 4mm thick plates Stainless steel of grade SS 316L, all welding shall be argon welding with 3 front fascia to be in 040 acrylics for illumination with Samsung LEDs or equivalent and water proof union drivers. 3M/LG make or equivalent vinyl as appeared shade to be pasted on to the front 040 acrylic to match the colour of the logo with lacquer coat on top surface with lifting arrangement. The signage to be fixed on to the stainless steel SS 316 frame with reverse screws and requested fixtures including, fabricating, moulding, buffing, installing, etc. Complete as directed by EIC.
1
-
-
Providing and fixing JNPA’s Box letters of dimension as shown attached dwg. fabricated of 4mm thick plates Stainless steel of grade SS 316L, all welding shall be argon welding with 3 front fascia to be in 040 acrylics for illumination with Samsung LEDS or equivalent and water proof union drivers. 3M/LG make or equivalent vinyl as appeared shade to be pasted on to the front 040 acrylic to match the colour of the logo with lacquer coat on top surface. with lifting arrangement. The signage to be fixed onto the stainless steel SS 316 frame with reverse screws and requested fixtures including, fabricating, moulding, buffing, installing, etc. Complete as directed by EIC.
1
-
-
Providing and fixing ‘PASSENGER FERRY TERMINAL’s Box letters of dimension as shown attached dwg. fabricated of 4mm thick plates stainless steel of grade SS 316L All welding shall be organ welding with 3 front fascia to be in 040 acrylics for illumination with Samsung are equivalent LEDS and water proof union drivers.3m/LG are equivalent vinyl as appeared shade to be pasted on to the front 040 acrylic to match the colour of the logo with lacquer coat on top surface. with lifting arrangement. The signage to be fixed onto the stainless steel SS 316 frame with reverse screws and requested fixtures including, fabricating, moulding, buffing, installing, etc. Complete as dissected by EIC.
2
-
-
Providing and fixing ‘यात्री नौका टर्मिनल’ Box letters of dimension as shown attached dwg. fabricated of 4mm thick plates stainless steel of grade SS 316L All welding shall be organ welding with 3 front fascia to be in 040 acrylics for illumination with Samsung are equivalent LEDS and water proof union drivers.3m/LG are equivalent vinyl as appeared shade to be pasted on to the front 040 acrylic to match the colour of the logo with lacquer coat on top surface. with lifting arrangement. The signage to be fixed onto the stainless steel SS 316 frame with reverse screws and requested fixtures including, fabricating, moulding, buffing, installing, etc. Complete as dissected by EIC.
2
-
-
Variable Message Sign
-
-
-
Providing, fixing and erection of structural steel work in hollow section of various thickness and sizes in square, rectangular and round shape from 25mm to 450mm section as per IS 4923 YST 310 Grade produced from iron ore and blast furnace route etc. as per detailed designs and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position, making riveted/bolted/ welded connections and painting complete.
3
-
-
Providing hot dip galvanizing conforming to IS 12594-1988 to reinforcement bars, having mass of zinc coating shall not be less than 610 grm/sqm of bar surface area factory control process with Degreasing, Rinsing, Acid Pickling, Again Rinsing after picking, Fluxing, Hot Dip Galvanizing in molten Zinc bath Having Zinc purity of bath minimum 98.5% Quenching & Passivation Process.8 to 12 mm dia with prior approval of concerned Superintending Engineer
3
-
-
Providing and fixing Aluminum-backed flexible prismatic (AFP) sheeting consisting Yellow colored flexible prismatic sheeting with non-metallic prismatic lens as Retroreflective elements and conforming to ASTM D 4956-09 Type VI specification for rebound able Retroreflective sheeting. This flexible prismatic sheeting shall be of 1ft width and laminated at the back with a 50 micron Aluminum (Al) foil with pressure sensitive adhesive and liner. Further, this flexible prismatic sheeting shall have screen printed arrow/slant line pattern in black color in a continuous roll format. Neither AFP sheeting nor the flexible prismatic sheeting used in it shall crack when slowly bent in 1 second time around a 1/8th inch mandrel after being conditioned for 24hrs at 0?C and tested as Providing and fixing Aluminum-backed flexible prismatic (AFP) sheeting consisting Yellow colored flexible prismatic sheeting with non-metallic prismatic lens as Retroreflective elements and conforming to ASTM D 4956-09 Type VI specification for rebound able Retroreflective sheeting. This flexible prismatic sheeting shall be of 1ft width and laminated at the back with a 50 micron Aluminum (Al) foil with pressure sensitive adhesive and liner. Further, this flexible prismatic sheeting shall have screen printed arrow/slant line pattern in black color in a continuous roll format. Neither AFP sheeting nor the flexible prismatic sheeting used in it shall crack when slowly bent in 1 second time around a 1/8th inch mandrel after being conditioned for 24hrs at 0?C and tested as per section S2.2.2. of ASTM D 4956-09. The AFP sheeting, with the liner removed, shall be applied with a neoprene contact adhesive with a Polychloroprene as base, viscosity of 200-450 cps and solid content of 20-30%. Once applied, the edges of the product shall be sealed all around with a two-part epoxy based structural adhesive and shall be extremely resistant to peel-off. A test report from institutes like ARAI/CRRI confirming to above mentioned flexibility and ASTM-D4956-09 Type-VI retro reflectivity performance of the flexible prismatic sheeting used in AFP shall be submitted by the tenderer during prequalification and supply of material.
15
-
-
Excavation for foundation in earth, soils of all types, sand,gravel and soft murum, including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete.
90
-
-
Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/ granite/quartzite/gneiss metal for steps including steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface, only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.
4.5
-
-
Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and RCC column and steel stanchions etc. columns as per detailed designs and drawing or as directed including Steel centering formwork, cover blocks laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)
13.5
-
-
Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete.
7
-
-
Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.
1
-
-
Supply & fixing of Variable Message Sign of size 3840 mm x 1920 mm on with 10mm Pitch full colour LED display completely automated carrying a performance warranty of 1 year. VMS solution shall be able to display real-time as well as static data. VMS solution shall be a fully customizable solution for each display/ location to show live traffic-related information, live congestion related information specific to the location. VMS solution shall be able to provide real time information like weather updates, alternate route options useful to the citizen. VMS solution shall be able to work in an automated fashion without manual intervention. VMS solution shall have an optional manual data feed for emergency messages. All VMS boards shall be controlled via a single server. VMS shall be Supply & fixing of Variable Message Sign of size 3840 mm x 1920 mm on with 10mm Pitch full colour LED display completely automated carrying a performance warranty of 1 year. VMS solution shall be able to display real-time as well as static data. VMS solution shall be a fully customizable solution for each display/ location to show live traffic-related information, live congestion related information specific to the location. VMS solution shall be able to provide real time information like weather updates, alternate route options useful to the citizen. VMS solution shall be able to work in an automated fashion without manual intervention. VMS solution shall have an optional manual data feed for emergency messages. All VMS boards shall be controlled via a single server. VMS shall be scalable to cater to multiple boards across the highway with ability to send targeted messages to specific group / all boards. VMS solution shall work on wired / wireless media. VMS solution shall display pictograms and text message in three languages. Videos also can be displayed (English, Hindi and Regional Languages). The system shall maintain the history of messages archived for future reference and analysis. VMS solution shall be able to integrate to traffic control room/other command centers. The intended information shall have the feature to schedule and display data at any date and time. VMS solution shall be capable of integrating with speed monitoring and driver feedback solutions for better traffic management / enforcement. VMS display shall be connected to a thin client windows embedded system which has an ability to schedule permitted download and upload time so as to use connectivity during non-peak hours. Also no Personnel shall be required to either switch on, switch off, power off, log in or log out procedures. These functions shall function automatically as scheduled. The thin client shall have 4 GB RAM and 16 GB Flash Memory with 1.66 GHZ processor.
1
-
-
Total Amount of PART (G) (Rs.)
1
-
-
Total A + B + C + D + E + F + G
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements