Jawaharlal Nehru Port Trust Tender
... More
The JNPT has issued a formal invitation for competitive bids for the Jawaharlal Nehru Port Trust project, for Upgradation Of Pilot Guest House To Training Center And Miscellaneous Works At Jnpa in Raigarh, Maharashtra, with an estimated contract value of Rs. 8,11,59,116. The bid opening date for this tender is 09-05-2025 and the last date for bid submission is 05-06-2025. Interested bidders for Jawaharlal Nehru Port Trust tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.
Jawaharlal Nehru Port Trust - JNPT Tender
Civil And Construction
Building Construction
Eprocure
Opening Date9 May 2025
Closing Date5 Jun 2025
Tender Amount₹ 8,11,59,116
Technical
Technical
Financial
Additional Eligibility
Bid Capacity
... View More
The formula for bid capacity is: Assessed available bid capacity = (A x N x 2 - B) Where A = Maximum value of civil engineering works executed in any one financial year during the last five years N = Number of years prescribed for completion of the works for which bids are invited B = Value, at current price level, of existing commitments and on-going works to be executed during the next ‘N’ year.
Technical Capacity
... View More
The required prior work experience for the bidder includes having successfully completed building (Architectural) and Interior composite works including HVAC, Electrical, Networking, fire fighting during the last seven years. The experience can be in one of the following forms:
- Three similar completed works each costing not less than 40% of the estimated cost (Rs. 324.64 lakhs), - Two similar completed works each costing not less than 50% of the estimated cost (Rs. 405.80 lakhs), - One similar completed work costing not less than 80% of the estimated cost (Rs. 649.27 lakhs).
The value of work for HVAC, Electrical, Networking, and fire fighting should be at least 20% of the value under eligible assignment along with allied civil works. The cost of similar work can be calculated by enhancing the actual value of work at a simple rate of 7% per annum from the date of completion to the date of bid opening. Additionally, the bidder should have a minimum local content target of >=50% as a Class I Local Supplier.
Costs
EMD
₹ 19,16,000Document Cost
₹ 23,600Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_JNPT_859368_1Bid Award Id
ViewTender No
PPD/DGM-I/Pilot GH/T-24/2025Tender Authority
Jawaharlal Nehru Port Trust ViewPurchaser Address
-Website
http://http://www.jnport.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. complete
793
45
35685
... More
Removing the existing cement plaster of any thickness without causing dust nuisance and stacking the debris upto a distance of 50 metres or spreading in the compound and cleaning the site etc. complete.
1542
52
80184
... More
Removing brick bat coba including stacking the spoils as directed with all leads, lifts etc, complete.
5
633
3165
... More
Dismantling the R.C.C. Work 1:2:4 and sorting out the materials such as steel etc. as directed and stacking them within the specified lead as directed etc. complete.
30
1451
43530
... More
Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 10 metres lead.Contractor to use support props for beam and surround area before starting any breaking activities
15
32000
480000
... More
Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 10 metres lead of:Contractor to use support props for beam and surround area before starting any breaking activities
546
1220
666120
... More
Pest control : Providing antitermite treatment to the sides of flooring of the existing building as per I.S. 6313(Part-Ill) by purching holes 6mm dia. drilled at a distance of 30cm. centre to centre and injecting one percent of chlorodane emulsion concentrate at the rate of 50 ml per hole and sealing by fillingputty etc. complete.
538
62
33356
... More
Carting away of debris from work premises to dumping area with tractor trolley as directed by engineer in charge .
100
3500
350000
... More
Dismentaling & removal of Existing M.S Railing : Removal of existing balcony railing of any length, and stacking the same material with all leads and lifts, complete on site. As directed by Engineer in charge.
28
190
5320
... More
Dismentaling & removal of Existing False Ceiling
476
161
76636
... More
Dismantling of concrete pedestal up to required height including cutting reinforcement by using of concrete saw, complete including all fixing arrangements of the machines, water for cooling, diamond saw, other accessories, safety of workers and removal and disposal of debris as per instruction of site in- charge etc complte
30
19425
582750
... More
Removing W.C. pans/ Wash Basin including disconnecting the sanitary and water supply connections, removing and breaking flooring and bed con-crete around pan removing the same carefully and stacking the serviceable materials as adn where directed including throwing the unserviceable materiasls out side etc. carefully and throwing out the refusal outside etc. complete.
24
207
4968
... More
Providing & Fixing of Temporary Barricading Work site and creating sepaRate access for Guest House using mild steel frame and Colour galvanized sheets and hassian Cloth as per approved Plan, Contractor has to remove and handover used material to JNPA with inventory , item complete as per direction engineer incharge.
144
2650
381600
... More
Structural Audit of building from certified structural consultant for building demolition and proposed structrual changes.
8683
9
78147
... More
Removing the Existing Toilet Plumbing Concealed Piping etc as per Required and shifting the material within site permices.
12
5000
60000
... More
EXCAVATION AND RCC WORK
-
-
-
... More
Excavation for foundation in earth, soils of all types, sand,gravel and soft murum, including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5m to 3.0m) By Mechanical Means
120
258
30960
... More
Filling in plinth and floors with approved excavated material in 15cm. to 20cm. Layers including watering and compacting etc. complete.
80
599
47920
... More
Excavation for Foundation in Hard Rock by chiselling, wedging line drilling, etc. including trimming and levelling the bed, removing the excavated material and stacking it in measurable heaps within a distance of 50m from the building area or site including dewatering and backfilling with available earth soil / murum watering, ramming etc. complete By Mechanical Means
50
365
18250
... More
Providing and fixing 25 mm diameter steel anchor dowel in hard rock including drilling hole of 32 mm diameter upto 0.75 mtrs depth, placing the dowel in position and effectively grouting the hole with CM 1:1 proportion etc. complete.
250
1674
418500
... More
Providing dry /trap / granite quartzite / gneiss rubble stone soling 15cm to 20cm thick including hand packing , filling voids with Crushed sand / grit ramming watering, compaction etc. complete
50
1382
69100
... More
Providing and laying cast in situ / Ready mix cement concrete of M-15 Grade trap / granite / quartzite / gneiss metal for foundation and bedding including bailing out water, steel centering, formwork, laying / pumping, compacting roughening them if special finish is to be provided, finishing if required and curing complete with fully automatic micro processor based PLC with SCADA enabled reversible Drum type mixer / Concrete batch mix plant (Pan Mixer) etc. complete with fine aggregate (Crushed sand VSI Grade)
75
6359
476925
... More
Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite/quartzite/gneiss metal for R.C.C.work in foundations like raft, strip foundations, grillage and footings of R.C.C.columns and steel stanchions etc. including bailing out water, Steel centering, formwork, cover blocks, laying/pumping, compaction and curing roughening the surface if special finishis to be provided (Excluding reinforcement and structural steel) etc.complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Panmixer) etc.complete. With fine aggregate (Crushed sand VSI Grade)
40
7287
291480
... More
Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. ( Resistant Steel For Lintel & Copping)
5
89703
448515
... More
Providing and laying Cast in situ/Ready Mix cement concrete in M20 of trap/granite/quartzite/gneissmetal for bed blocks, foundation blocks and such other items including bailing out water,Steel centering, formwork, laying/pumping, compacting, roughening them if special finishis to be provided, finishing unevenandh one combed surface and curing etc.complete.The Cement Mortar1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic microprocessor based PLC with SCADA enabled reversible Drum Typemixer/concrete Batch mixplant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
28
6721
188188
... More
Providing neeru finish to plastered surfaces in all positions including scaffolding and curing etc. complete.
435
65
28275
... More
Providing bituminous Type A liquid seal coat on bituminous surface including supplying all materials and bitumen of specified grade preparing existing road surface, heating and applying bitumen @ 0.98 KgSqm. by mechanical means, spreading chips and rolling, by static roller having weight 8 to 10 MT. etc. complete. (VG-30 bulk bitumen rates are considered to arrive at rates)
30
75
2250
... More
Painting Line, Dashes, Arrows etc on Roads in two coats on new work with ready mixed road marking paint confirming to I.S. 164 on Bituminous surface including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site and traffic control (Over/Upto __cm wide) (MORTH-803) --______ Surface Over 10cm Wide On New Surfac
30
196
5880
... More
Stamp Concrete of 100mm Thickness- Providing and Layingin-situ M30 Grade un reinforced plain cement stamp concrete of 100mm thickness pavement over aprepared subbase with 43 grade cement, coarse and fine aggregate (natural sand/ VSI grade finely washed crushed sand)Confirming to IS383, as per mixed in a batching and mixing plant/ non tilting mixer and weigh batcher as per approved mix design, admixtures, transporting to site in nagpur city with lead upto 20KM (onInner Ring Road from Avasti nagar to wadi), spreading, laying with approved make pover, compacted and finished in acontino us operation, finishing to lines and grades Also Providing, Placing and applying stamp powder which is light fast UV resistant pigment with appropriate chemical compounds of desired colour on base concrete after excess bleed water has evaporate dusing dry shake method @5kg per sqm. Including texturing, and covering with plastic sheet (min200 micronthic kness)and also applying two coats of UV-stable,30%solids clearsealer@150 to 250gms per sq musing surface roller and protecting from falling dust,dirt and curring by curring compound/ by providing cement vata in cement Mortor1:8@0.6mx0.6m center to center, admeasuring 80mm at bottom and 40mm at top with depth of 75 mm and maintaining the same through out curing period by any other method approved by Engineer- incharge or Landscape architect etc.complete.(pri or approval of superinteding Engineer will be necessary )
125
1649
206125
... More
Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed
sand VSI Grade)
10
15750
157500
... More
Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite/ quartzite/ gneissmetal for R.C.C. columns as per detailed designs and drawings or as directed including steel centering, formwork, coverblocks, laying/ pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinfor cement and structural steel).with fully automatic micro process or based PLC with SCADA enable dreversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
10
13967
139670
... More
Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
5
12452
62260
... More
Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite / quartzite /gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork ,cover blocks, laying / pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
5
14150
70750
... More
CIVIL WORK
-
-
-
... More
Providing Autoclaved Aerated Concrete Block masonary of Ecolite or equivalent make conforming to IS:2185 (Part 3) - 1984 in extra fine jointing mortar of fixoblock of UltraTech or equivalent in superstructure including striking joints, raking out joints and scaffolding etc. Complete. (The test shall be carried out conforming to IS:6441 (Part I) - 1972)
37
7561
279757
... More
Providing first class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in plinth including bailing out water manually, striking joints on unexposed faces, pointing with cement mortar 1:3 on exposed face and watering etc. Complete
15
7928
118920
... More
Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1Kilogramper cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days
scaffolding etc.complete.
713
639
455607
... More
Providing internal cement plaster 6mm thick in a single coat in cement mortar 1:4 without neeru finish to concrete surface in all positions including scaffolding and curing etc. complete.
1194
203
242382
... More
Providing and applying gypsum plaster ( with Gypsum material of Gypsum India / Mega Sign or equivalent make ) with finishing with gypsum material in 10 to 13 millimeter thickness to previously plastered surface / or on newly brick surface ( Excluding rough cast plaster ) in all position including preparing and Finishing the surface scaffolding etc.complete.
1116
765
853740
... More
Providing waterproof plaster in W.C. and bath 12 mm thick for dado in cement mortar 1:3 with neat finishing, floating using waterproofing compound at the rate of 1 kg. per bag of cement of approved make and manufacturer and curing etc. complete. (Excluding Tiles) (As directed by Engineer in Charge)
221
386
85306
... More
Providing water proof bedding for flooring of Toilet 25 -35 mm thick in C.M. 1:3 including using approved water proofing compound of Sunanda / Pidilite / Kerakol or equivalent in specified proportion as per manufacturers specifications for per bag of cement including leveling, curing and covering etc. complete.
45
1350
60750
... More
Providing waterproofing in W.C. and bath including brick bat coba in all position including providing and laying 12mm bedding in cement mortor 1:3 on vergin concrete slab with waterproofing compound @ 1Kilogram/per bag of cement laying brick bat coba of required thickness in cm 1:5 with waterproofing compound 1 Kilogram/bag of cement grouting and finishing the top layer with 20mm thick brick bedding in cm mortor 1:3 with waterproofing compound 1 Kilogram/per bag of cement and testing the treated portion for 48 hours by pond test and covering ten years' guarantee on requisite stamp paper including curing etc. complete
4
6195
24780
... More
Providing, supplying, mixing and applying two coats of approved ROFF HYSEAL waterproofing compound (Product Code 201), as per the directions below. Surface preparation should include cleaning the surface of all dust, oil, grease, oil or any other surface treatment agent etc. All static cracks more than 1mm in width must be chased and filled with HYSEAL MODIFIED MORTAR and cured. All surfaces should be prewetted previously and sufficiently and HYSEAL MODIFIED MORTAR to be prepared by mixing HYSEAL, Cement and Sand in the proportion 1:1:4, first dry mixed and then water added to get a normal consistency (2.5 volumes of HYSEAL to 1 volume of water) to get a creamy layer and brush apply the same. The second coat should be applied when the first coat is still green and to be cured properly.
618
1190
735420
... More
Providing & fixing machine cut machine polished 18 mm to 20 mm thick granite stone for treads and risers of staircases of approved colour and shade with full moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etc. complete.
22
4172
91784
... More
Providing & Fixing Vitrified Tiles flooring (mirror finish) 1200 x 600 or any size : Providing and laying Rectified and vitrified mirror finish decorative type tiles of size of approved make, shade and pattern for flooring in required position laid on plaster of 1:4 cement mortar, cement paste, removing existing tiles stacking the same and debris disposing off upto a distance of 50 metres & filling joints with neat cement slurry, curing and cleaning, covering with POP or vinyl sheet etc.complete.a)
474
1177
557898
... More
P&F Flooring 600 x 600 : Providing and fixing MATT FINISH ANTISKID tiles of minimum size 600 x 600 mm of about 10mm thick having water absorption less than 0.055 of approved make, shade and pattern for floor & dado in required position fixed on plaster of cement mortar 1:4 neat cement paste. including filing joints with neat white cement slurry curing cleaning etc. complete
45
4322
194490
... More
Providing and laying Vitrified tiles having size 60 cm. x 60 cm / 60 cm to 120 cm. confirming to corresponding I.S. for dado and skirting in Toilets and required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry/ grouting cleaning curing etc. complete.
199
4322
860078
... More
Providing and laying Rectified and vitrified mirror finish decorative type tiles for 100 mm High Skirting of approved make, shade and pattern for Skirting in required position laid on plaster of 1:4 cement mortar, cement paste, removing existing tiles stacking the same and debris disposing off upto a distance of 50 metres & filling joints with neat cement slurry, curing and cleaning, covering with POP or vinyl sheet etc.complete.)
338
2111
713518
... More
Providing and fixing Double patti door frame in Composite marble :Providing single sills (100-200mm wide), jambs and frames of black/approved colour composite slabs of mininmum 15-18mm thick of approved quality, vein and colour with machine polished surface on a bed of cement mortar 1:4 including neat cement float, with cement slurry to match the colour of the slabs, curing polishing and rounding edges, cleaning etc. complete. (Basic rate Rs. 300/sft)
36
2452
88272
... More
Providing and fixing Single patti door frame in Composite marble :Providing single sills (100 mm wide), jambs and frames of black/approved colour composite slabs of mininmum 15-18mm thick of approved quality, vein and colour with machine polished surface on a bed of cement mortar 1:4 including neat cement float, with cement slurry to match the colour of the slabs, curing polishing and rounding edges, cleaning etc. complete. (Basic rate Rs. 300/sft)
16
1850
29600
... More
Providing and fixing double sills, jambs and frames of black/approved colour granite slabs 20 mm thick of approved quality, vein and colour with machine polished surface on a bed of cement mortar 1:4 including neat cement float, filling joints with cement slurry to match the colour of the slabs, curing polishing and rounding edges, cleaning etc. complete. (Basic rate Rs. 165/sft)
137
1198
164126
... More
Providing and fixing Single sills, jambs and frames of black/approved colour granite slabs 20 mm thick of approved quality, vein and colour with machine polished surface on a bed of cement mortar 1:4 including neat cement float, filling joints with cement slurry to match the colour of the slabs, curing polishing and rounding edges, cleaning etc. complete. (Basic rate Rs. 165/sft)
29
960
27840
... More
Providing and constructing Granite platform for toilet,wash basin counter as per Architects details. Vertical and Horizontal supports of kadappa stone with granite top and 75mm granite fascia as per architect detailed drawing and design including making provision for and fixing wash hand basin etc. complete with finishing/moulding & polishing .
2
9827
19654
... More
Urinal Partition-Providing & fixing 18 to 20mm thick both side mirror polished approved colour Granite Urinal partitions of 600 mm wide & 1550 mm high or as per approved size with round edges moulding and fixed in C.M. 1:2and filling joints in white cement mixed with pigment to match the colour of granite including curing, cleaning as per Architects detailed drawing & design etc complete.Basic rate of Granite-150/Sft.
4
7850
31400
... More
EXTERIOR ELEVATION
-
-
-
... More
P&F ACP Cladding with Tray type fixing : Designing, providing, fabricating and installing Aluminium Composite panels plain / designer ( FR grade 0.5+3mm +0.5 mm) 4mm thick cladding system on exterior façade with back structure framing arrangement in jindal make aluminium sections, as per approved design (based on concept architectural elevation drawings), hot dip galvanized / non ferrous metal anchor fasteners, jointing and sealing with approved compatible silicon sealant (Dow Corning or equivalent approved). Work to include preparing and finishing of junctions with concrete, masonry, aluminum including us of flashing if any as approved by the Engineer in charge etc. Make Alstrong or equivalent
1199
4305
5161695
... More
Providing and fixing metal Baffel panels powdercoating finished are fixed on to 50-100 x 25 -50mm deep (or as per approved shop Drawing) of galvanized steel with cut-outs to hold the panels in customize module. Carriers are suspended from the roof by 4mm dia. Galvanized steel rod hanger with special Hight adjustment spring steel suspension clip at max. 1mtr. C/C. Hangers are fixed to the roof by ceiling bracket. work will be done as per approved Design & Drawing or Direction by Engineer In-Charge.
29
6200
179800
... More
Providing and Fixing Structural Glazing : Designing, providing, fabricating and installing Structural glazing system (inclusive of vision, spandrel and openable panels) with back structure framing arrangement, as per approved design (based on concept architectural elevation drawings), Anodised Aluminium members like muliions, etc. in approved shade, including required stainless steel fitting and fixtures, required hot dip galvanised / non ferrous metal.anchor fasteners, jointing and sealing with approved compatible silicon sealant (Dow Corning or equivalent pproved), required fire stop, sheaves. Work to include preparing and finishing of junctions with concrete, masonry, aluminium including use of flashing if any as approved by the Engineer in charge etc. all complete.( all fittings of dorma or equivalent and Glass of Saint Gobain or equivalent) Rate includes removing existing shutters stacking the same at JNPT Store yard as directed by engineer incharge
100
8550
855000
... More
Providing and applying external raincoat painting with crack filling acrylic polymer based chemical compound coating to the external surface of walls to prevent water seepage in the masonry walls during monsoon added with required shade Steiner to give required shade to the surface in two coats. Including providing three coat of priming of polymer base primer including preparing surface scrapping the existing loose old paint, removing loose particles of sand on the surface opening and cleaning the cracks developed in the external plaster, removing loose particles by chiseling, filling cracks by chemicals compound of approved make with proper penetration etc. Coating of Raincoat with the help of brush and as per instructions and specification given by manufacturer and with instruction from Engineer in- charge. Work shall be executed by certified applicator only and covering gurantee of 3 years on court stamp paper of Rs. 500/- and necessary testing etc. complete
663
259
171717
... More
Providing and fixing signages and safety signages in SS and vinyl material as per the required sizes, architectural features and as approved by engineer- in -charge.
2
32550
65100
... More
providing & fixing Spider Entrance canopy of Dorma make spider & Other hardware fixed on 250x250x8mm box section vertical and horizontal 200x100x8mm & supports 100x50x4mm box section duly one coat of red oxide and 2 coat of approved colour epoxy paint on it full welding with ms routel installation for ss spider 4way and 2 way as per the requirement glass shall be 6mm clear + 1.52 pvb +6mm clear glass both glass shall be toughened and ms tie rod shall be installed as per the requirement and complete installation of canopy and slope shall be towards front area as per approved drawing and design and as directed by engineer in charge
56
21700
1215200
... More
Signage : Prototyping supply installation & commissioning logo & letters made of 18 gauge thick S.S.316material laser cut out with 25mm x 18 gauge thick side patti brazing for box type 3D Letters with backside S.S.Scrue brazing for fitting arrangment .all letter polish & white colour PU coated as per your requirment.All inculisive of Transpot Labour mechanical cutting Drillding , Making holes etc completed
8
77220
617760
... More
Entrance Gate Branding 3D Signage -Prototyping supply installation & commissioning letters made of 18 gauge thick S.S.316material laser cut out with 25mm x 18 gauge thick side patti brazing for box type 3D Letters with backside S.S.Scrue brazing for fitting arrangment .all letter polish & white colour PU coated as per your requirment.All inculisive of Transpot Labour mechanical cutting Drillding , Making holes etc complete
8
77220
617760
... More
PAINTING WORK
-
-
-
... More
Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete.
1114
90
100260
... More
Providing and applying Antimicrobial pearl/ luster / Satin finish paint of approved colour and shade over punned / puuty finish etc. complete.
1004
253
254012
... More
Providing and applying plastic emulsion paint of approved colour, shade and quality to old/new surfaces in two coates including scaffolding, preparing the surfaces etc. complete. (including primer coat).(Dulux, Asian or equivalent)
231
220
50820
... More
Providing and applying two coats of synthetic enamel paint for window grills and railing of approved colour to new /old structural steel work and wood work in buildings, including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat) etc. complete.
64
96
6144
... More
Providing and applying weather proof apex Ultima Paint two coats on external surface, or as per Direction by Enineer in Charge.
665
372
247380
... More
DOORS AND WINDOWS
-
-
-
... More
Providing & Fixing Door Shutters in Both side Laminate finish : with Complete Hardware at require location and having height more than 1:5 meter made by using solid core Mariane type flush door 35 mm thick of the requisite manufacuture viz.Anchor / Century / Kenwood / Duro or equivalent generally confirming to I.S.710 -termite treatment to plywood and wood work with ten years guarantee bond etc. Including all leads & lifts etc. Complete necessary lipping (BTC) mounding, hardware, locks handle’s etc.as per Architectrual drawing to be approved by Employer before entire scheme is finalsed and directed by engineer incharge.
38
10500
399000
... More
Providing and fixing first quality old seasoned wood for door frame , architrave, Design Elements, paneeling, rafter etc. including chamfering, mulding, polishing etc. complete as per detail design and instructions engineer in charge.
2
200050
400100
... More
Providing and fxing of uPVC Window Openable/ Sliding, Ventilator etc of all sizes, made out of Coated extruded section plain uPVC sections. The window frame made out of rigid uPVC sections meter cut at 4 corners & joint with plastic fusion welding with internal reinforce required. The shutter section made out of extruded rigid uPVC with internal reinforced with provision of 5mm glaze/wire mesh as per requirement. The window shall be fixed to the wall using 65x100mm long M.S. fasteners at suitable place provided for each vertical and horizontal member etc. complete as per manufacture’s specification and direction of Engineer-in-charge.
47
16500
775500
... More
ROOFING AND CEILING
-
-
-
... More
Providing and fixing in position Moisure Resistant Gypsum board ( MR Board of Saint Gobain or USG Make ) false ceiling with 12.5 mm thick Gypsum boards, screwed /fixed to the under structure of suspended G.I. Grid constructed and suspended from the main ceiling consisting of ceiling sections of size 25x50 mm maximum center to center distance of 600 milimetre perimeter channel and intermediate channels at maximum center to center distance 1200 milimetre galvanized grid should be fixed to reinforced cement concrete slab. The gypsum board should be fixed to galvanized iron grid with necessary screws. The boards should be taped and filled from underside to give smooth, seamless ceiling. The rate should include necessary additional ceiling sections and inter mediate channels. Additional inter mediate channels should be fixed to straphangers for additional support to prevent strapping at every 1200 milimetre item to be completed in all respect including necessary sleeves for ducts finishing of joints cut outs, painting including labour, material, lifts etc. all complete.curved wedge of 51.5 mm and two flanges of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with the help of connecting clips and in direction perpendicular to the intermediate channel at 450 mm centers, 12.5 mm dry walls screws at 230 mm centers; fixing screws mechanically either with screw driver or drilling machine with suitable attachment etc. complete.
196
2250
441000
... More
Providing and fixing gutter of 22 B.W.G.(0.8mm)plain galvanised iron sheets 120 cm wide
88
2450
215600
... More
Providing and Fixing Mineral Fibre Acoustical Suspended Ceiling System with Dune(BevelledTegular) Edge Tiles of size15mm Exposed Grid.The tiles should have Humidity Resistance(RH) of99% ,NRC0.5, Light Reflectance 85% ,Thermal Conductivity k=0.052-0.057 w/m K, Colour White ,Fire Performance UK Class 0/ Class 1 (BS476pt-6&7) inmodule size of 600x600x16mm, with Recycled content of 35%. The tile shall be laid on precoated G.I.channel height 32 with 15mm wideT-section flanges colour white having rotary stitching and XL2CLI Ponall Tsectionsi .e.the Main Runner,1200mm and 600mm Cross Tees with a web height of 32 mm and a load carrying capacity of 7.57 Kilograms / M2 and pull out stength of minimum 100 Kilograms..The T Sections have a Galvanizing of 90 grams per M2 and need to be installed with Suspension system. The Tile and Grid system used together should carrya 10year warranty .approved as per GRIHA and BS476 etc.complete.
227
1873
425171
... More
Providing and fixing false ceiling of WPC 20 mm thick including scaffolding, if necessary, all iron work and beading i.e. visible surface etc. complete. (excluding frame work and runners)
100
5500
550000
... More
Providing and Fixing of 50 mm Thick PUFF Roofing Panels Sheet Thickness 0.5 mm Both Side PPG/ PPGL . Density 40 Kg / 3 .Colour RAL 9002 with Covering Flacing and side flacing as per Approved Design and drawing or Direction by Engineer In-Charge.
415
6500
2697500
... More
Providing and fixing false ceiling with eco-friendly light-weight calcium silicate tiles of spintone surface texture aerolite make or equivalent of size 595mm x 595mm having 15mm thick densified micro look edge and 100% humidity resistance incombustible as per BS 46part IV and thermal conductivity 0.043 w/m 0 KC and NRC 0.50 placed in true horizontal level suspended grid of size 600x600mm made from hot dipped G.I. steel sections ion silhouette profile, rotary stitched double webbed white with 6mm reveal profile (white/black), wherein, main T runner of size 42mmx14mm between main tee 600mm center-tocenter and secondary cross T of size 33x14x0.43mm thick of length 600mm long spaced inter-locked at middle of the first crossed T in each panel to form grid of 1200mmx600mm resting on periphery wall Profile wall section 19mm (7+7) x 19mmx0.40thicknesses and laying false ceiling for services like diffusers grills including cutting, making opening for light fittings, fixtures, , smoke detectors etc., wherever required. Main T runners suspended from ceiling with using G.I. soffit cleats of size 25x35x1.6 mm of required length fixed to the ceiling with 6mm dia and 50mm long dash fastener, 4mm dia G.I. adjustable rods with powdercoated/good quality G.I. level adjustment clips of 35x35x0.8mm spaced @1200, center-to- center along main T all complete at all heights as per the specifications, drawings and as pe
238
2045
486710
... More
Design & detailed engineering approved by an engineer registered under Structural, having at least 10 years experience of designing tensile structures and similar roof structures, having authorised copies of non-linear design, analysis and verification software for such structures, supply, transportation, erection at site & commissioning of MS Structure for Tensioned Membrane Structure as per the Architect's drawing including preparation of shop drawings for Roof structure, item completes including hardware like bolts, CSK Allen screws, washers, keder profile extrusion to receive bolts & Crane of upto 50 ton Capacity to mobilise & demobilise, lifiting & shifting up to G+2 floors. Item includes finishing top of MS with Zinc primer / epoxy Primer & Epoxy / spray Paint.
20
185000
3700000
... More
CARPENTARY AND INTERIOR WORK
-
-
-
... More
Providing and fixing plywood Laminated panelling, frame work as per requirement to be Fixed on wall/masonry/column with necessary fixing details to attain the reqd level of the surface, stability & rigidity. framework to be covered using 12 mm thick Mariane grade plywood as per design. Finished with 1 mm thick approved laminate from sides & top. Edges of laminate to be made smooth. Rate inclusive of necessary Cutouts for switches /lights & other fixtures Basic Rate of laminte Rs. 450/Sq.M..
45
3950
177750
... More
Providing and fixing Bison Board panelling, frame work as per requirement to be Fixed on wall/masonry/column with necessary fixing details to attain the reqd level of the surface, stability & rigidity. framework to be covered using 12 mm thick Bison Board as per design.
70
3380
236600
... More
Centre table :Providing and Fixing CENTER TABLE having made up of 18mm thick Mariane plywood (ISI-710) made up of as approved design and Drawing and finsihed with 1.00mm thick LAMINATE IS-2046 premuim quality is approved.
3
60500
181500
... More
Providing and Cupbord made out of Top , sides, Self, Shutter , Facia, etc. in 18mm thk. Marine plywood. Finishes - All the external surfaces to be finished with 1.0mm thk. Laminate and internal surfaces to be finished with 0.8mm thk. laminate of approved shade.Hardware- All necessary hardware for knockdown fitting like Minifix , wooden dowels, Sunk screw,connector, L' Clip, Leveling Bolt with inserts, etc. complete as per Architect's Drawing and instructions of The Engineer In Charge. Edgeband - 2mm thick edgeband on all visible edges, 0.8mm edgeband on all non visible edges, PVC edge banding are imported from Rehau or Dolken of Germany. Manufacturer of Marine Plywood - Merino/GreenPly/Anchor or equivalent. Laminate - Merino/Greenlam/Century or equivalent. Hardware - Hettich/Hafele/ebco or equivalent. Edgeband - Rehau/Dolken or equivalent.,as per Architectrual drawings to be approved by employer before entire scheme is finalized and directed by engineer incharge.
32
26900
860800
... More
Traning Table type -1, providing & Fixing Training table type -1(Size:- 1800mm x 600mm ) Top in 25mm thick ply with 2mm PVC edge lipping on all exposed edges, MS podwer coated legs and supporting MS cross beams as per detailed as per architect drawing.
8
34750
278000
... More
Traning Table type -2, providing & Fixing Training table type -2(Size:- 1200mm x 600mm ) Top in 25mm thick ply with 2mm PVC edge lipping on all exposed edges, MS podwer coated legs and supporting MS cross beams as per detailed as per architect drawing.
27
28500
769500
... More
Podium : Providing & suppling of Podium made by using 19mm,12 thk Mr. Grade ply with Laminate of approved make and as per Architect/ Clients design.
2
35000
70000
... More
Copper Colour Mirror with Panelling : Providing and fixing Copper Colour Tint Mirror panelling with framework 12 mm thick plywood finished with 8mm thk tint grey colour mirror fixed as per Architect's Drawings. (Plywood of the generally confirming toI.S. 710)
6
7363
44178
... More
WOODEN DECK - Providing and fixing of Brazilian Walnut Wood specie 20mm thick x 140mm wide and 910 mm long. Along with Side grooves in the plank for fixing the PVC clips, top surface to be plain. All side groves of the planks to be oiled. Fixing to be done on 1x2 inches Aluminum + Wood reinforced batons with chemical treatment for Termite resistance. Subfloor to be done in Virgin PVC pedestals of a height 430mm imported from Australia. All the hardwares to be used Stainless steel. Surface oiling on the Brazilian Deck Planks to be done in Bona oil imported from Sweden for better durability. Top finish of the deck to be maintained 450mm.
8
13000
104000
... More
Providing and fixing Glass Railing : 0.9 to 1.1 mt high: Designing, providing, fabricating and installing glass railing as per approved design (based on concept architectural elevation drawings), including required stainless steel fitting and fixtures, required hot dip galvanised / non ferrous metal anchor fasteners, jointing and sealing with approved compatible silicon sealant (Dow Corning or equivalent pproved), required fire stop, sheaves. Work to include preparing and finishing of junctions with concrete, masonry, aluminium including use of flashing if any as approved by the Engineer in charge etc. all complete.( all fittings of Hafele or equivalent and Glass of Saint Gobain or equivalent) or as directed by engineer incharge.
81
5400
437400
... More
Supply & Installation of Rockwool insulation for acoustical applications, in panelling, Ceiling etc.
616
2120
1305920
... More
Acoustic Panelling - Providing and fixing acoustical panel on existing surface with adhesive , design of the panel to be as per drwaing and details .
447
4500
2011500
... More
Carpet Flooring - Providing and laying of Carpet Tile/roll over the specified area with following specification. The floor which recieves the carpet to be thourougly cleaned as per manufacturer's specification. The carpet is to be laid over a bed of manufacturer's approved adhesive spread evenly over the entire floor. The rate shall include cutting, trimming, fixing and clearing away of residual material to a location as directed. The rate shall also include supplying and laying of a protective layer of PVC or HDPE sheet of 50 microns thickness, held together with scotch tape. The laid carpet to be vacuumed after the removal of protective cover/on commissioning. If after the protective layer is removed and stains observed in the carpet because of inadequate protection, the same shall be shampooed and made good to the satisfaction of the Site In Charge /Engineer. The measurements of carpet will be the actual laid area( (.Basic Rate - 240/Sft)
205
3240
664200
... More
Providing & Installation Aluminium Skirting of 100 mm Height of approved make. Skirting should be fixed on the wall / partitions / paneling / counters in line and level with screw nut bolts / press & fit system as per the company standered procedure including all, machinaries, tools, tackles, material, labour etc at all levels & as per the instructions of engineer Incharge. (Basic Rate: Rs.150/- RFT)
178
725
129050
... More
Back Painted Glass Paneling -Providing and fixing of approved 6mm thk Glass (Make : Saint Gobain/ form 5 or equivalent ) over existing 8/12mm thk ply backing/MDF & frame work. Glass to be fixed on existing ply backing/MDF using 3M double sided tape & Silicon Adhesives, including all necessary hardware, cutouts required for it etc., complete as per the detail drawing. Cost to include providing white paint of 100mm band behind the joints to avoid any visible black area.Care has to be taken to ensure a seamless jointing with adjacent material finishes & levels.
33
7800
257400
... More
Providing and fixing Shutter to wall Cupboard consisting of Teak Wood styles and Rails 25 mm thick and 75 mm wide with panel insert of 12 mm thick particle Board with one approved coloured Laminated Face on one side 1.5 mm thick, bonded with Phenol Formaldehyde Synthetic Resin including Lipping Beading. Iron oxidised fixtures and fastening and oil primer coat etc. complete. (Excluding cupboard frame).
135
3682
497070
... More
Meeting Table - 16 Pax : Providing & suppling of Meeting table made by using 19mm,12 thk Mr. Grade ply with Laminate of approved make and as per Architect/ Clients design. Size : 6000 x 2500 x 750mm H.
1
168750
168750
... More
Meeting Table - 10 Pax (3800mm x 2400mm):Providing & suppling of Meeting table made by using 19mm,12 thk Mr. Grade ply with Laminate of approved make and as per Architect/ Clients design. Size : 3800 x 2400 X 750MM H.
1
155830
155830
... More
Meeting Table - 8 Pax : Providing & suppling of Meeting table made by using 19mm,12 thk Mr. Grade ply with laminate of approved make and as per Architect/ Clients design. Size : 3200 x 1200 X 750MM H.
2
137000
274000
... More
Meeting Table - : Providing & suppling of Meeting table made by using 19mm,12 thk Mr. Grade ply with Laminate of approved make and as per Architect/ Clients design. Size : 2100 x 1200 X 750MM H.
1
94700
94700
... More
Pelmet-Providing and fixing pelmets 150x200 mm of below sizes with verticals & horizontal made of 19mm thk. commercial Ply along walls and partitions with necessary wooden / ply support. The ply shall be finished in 0.8 mm thick Laminate of approved shade & colour as approved by the Architect. The rate to be inclusive of all accessories, such as anchor fasteners etc. complete.
64
2150
137600
... More
MISCELLANEOUS
-
-
-
... More
Providing, making and fixing Roller Blinds as per architectural drawing and instructions made out of approved make and quality fabrics shall be made from high quality texturised and spun yarn. It should has excellent textile appearance of translucency, 100% polyster fabric, acrylic coating on both side of fabric, fabric fixed to the proper location.including necessary hardware, drilling, cutting, powder coate aluminum clips, rods and pulling rope. two blinds should be over lap to each other by 150mm. etc. cpmpleted as required as specified by Architect/ Clients. (Area of the fabric shall be measured for billing) ( Make- Vista or Eq.) Basic Rate-100/Sq.ft
47
1600
75200
... More
Providinng & Fixing Picture Frame as per Design & Drawing (Spac to be add)
7
10500
73500
... More
Providing & suppling of Single Seater sofa made by using necessary ply & hardwood. Leg to be made by Teak wood with Watebase pu finished. Seat, Handrest and Backrest to be upholsered, complete as per design.
4
45000
180000
... More
Providing & suppling of 3 Seater sofa made by using necessary ply & hardwood. Leg to be made by Teak wood with Watebase pu finished. Seat, Handrest and Backrest to be upholsered, complete as per design.
1
85000
85000
... More
Providing and fixing imported quality wall paper of 0.8 mm. thick of approved quality and design made up of poly venyl coating with fabric backing five resistant wipe cleaning strain resistant and having height of 390 Gram/Sq.M.. etc. and as directed by Engineer-in-charge Basic Rate 350/- Sft
118
5002
590236
... More
Officer's chair W560xD560xH1000mm Providing & supplying Officer chair finished with Fabric, Mesh fabric, Fixed PP armrest, with Nylon frame, Mesh back,mesh seat filled, with foam, Five star nylon base with nylon casters lift, Adjustable seat height and tilt tension, Swivel type, Powder coating base etc complete as approved by the Engineer in charge etc. all complete. (Wipro, featherlite or equivalent)
55
14068
773740
... More
Traning Room Chair - Providing & supplying Training chair as approved by the Engineer in charge etc. all complete. (Wipro, featherlite or equivalent)
78
7500
585000
... More
PLUMBING WORK
-
-
-
... More
Providing and fixing European type wall -hung white water closet of approved make with Consiled Cistern for flush valve, push valve concealed type with coverplate 32 mm size of approved make including Chair Bracket, soil pipe, vent pipe upto outside face of wall,100mm plug bend inlet pipe all fittings, cutting and making good walls, floors etc. complete.
4
23180
92720
... More
Providing and fixing Health Faucet : Providing and fixing health faucet jet spray of approved Jaguar or equivalent make including necessary socket/union etc. complete as directed.
4
1172
4688
... More
Providing and fixing C.P.a 2-Way BIB cock with wall flange of approved make including necessary sockets/ union nut etc. complete as directed by Engineer in charge.
4
2364
9456
... More
Urinals : Providing and fixing white glazed wall mounted earthenware semi stall type urinals (of IS Std.) without cistern, with inlet pipes chrome finished push valve type tap, UUPVC flush pipe with fittings and flushing arrangement including UPVC soil pipe, UPVC trap and soil pipe connection upto outside face of wall, making good the damaged surface, chromium plated bottle trap, testing etc. complete.
4
4220
16880
... More
Bottle Trap : P/F Bottle trap for wash basin/Urinal
9
3750
33750
... More
Providing and Fixing Wash Basin : Providing and fixing "Hindware" or equivalent make Wash Hand Basin of Italian pattern and style of Olivia or similar series or fonte series, having star white as per Architecual drawing and directed by the Engineer-in charge etc. complete.
5
10650
53250
... More
Providing and Fixing Pillar Basin Mixer : PILLER BASIN MIXER of push tap/ Hands free with sensor of approved Roca make or equivalent make including necessary socket/union etc. complete as directed.
6
3500
21000
... More
Providing and Fixing, testing and commissioning of C.P. brass angle valve with C.P. wall flange, Nut and Washer etc. complete as required.
12
1650
19800
... More
Providing and fixing Soap Dispenser : with glass bottle of approved jaguar or equivalent make etc. Complete
3
1525
4575
... More
P&F Towel ring : Providing and fixing Towel ring round flange of approved jaguar or equivalent make etc. complete.
3
1433
4299
... More
Providing and Fixing of Toilet Paper Holder in chromium plated finish as per approved sample Basic rate of Rs. 1000/-
4
1430
5720
... More
Providing and fixing in position robe hooks in toilets as per approved sample basic rate of rs. 600/-
4
600
2400
... More
Providing and fixing Concealed Stop Cock : Supply fixing and installation of Concealed stop cocks of approved Jaquar make or equivalent (to be provided only at the entry point of plumbing lines within the toilets / pantry)
7
938
6566
... More
Providing and fixing 10 cm PVC nahani trap with grating etc. complete.
8
539
4312
... More
Providing & Fixing of PVC Multi Floor Trap 110x75x50mm Dia
2
3650
7300
... More
SS Kitchen Sink : Providing and fixing stainless steel kitchen sink (600 x 450 x 250 mm deep approx size) with or without Drainboard of Nirali, Hindustanmake or any other equivalent approved make with stopcock, pillar cock, waste couplings, CP bottle trap, rubber plug and CP brass chain CI brackets, drainage connection water supply with drain board and plumbing installations up to external wall etc complete as directed and instructed by Engineer incharge
1
16000
16000
... More
Providing & Fixing of 20mm Dia Piping CPVC SDR-11 Pipe Including fittings like elbow , tees , reducer with Necessaries etc. Complete Co ncealed Piping
90
405
36450
... More
Providing & Fixing of 25mm Dia Piping CPVC SDR-11 Pipe Including fittings like elbow , tees , reducer with Necessaries etc. Complete Co ncealed Piping
55
429
23595
... More
Providing & Fixing of 32mm Dia Piping CPVC SDR-11 Pipe Including fittings like elbow , tees , reducer with Necessaries etc. Complete Co ncealed Piping
65
531
34515
... More
Providing & Fixing of 40mm Dia Piping CPVC SDR-11 Pipe Including fittings like elbow , tees , reducer with Necessaries etc. Complete Co ncealed Piping
75
217
16275
... More
Providing & Fixing of Brass Ball Valve For Water Supply and Irrigation System
-
-
-
... More
Brass Ball Valve 20mm Dia
17
3845
65365
... More
Brass Ball Valve 32mm Dia
2
4251
8502
... More
Brass Ball Valve 40mm Dia
2
4628
9256
... More
Brass Ball Valve 50mm Dia
1
5174
5174
... More
Supply and fixing, of PVC soil, waste and vent pipes (SWR) confirming to IS13592 : 1990, type B with rubber ring (confirming to IS 5382) 6kg/sqcm with solvent joint inclusive of all necessary specials like bends, tees, offsets, door bends, junctions, screw type caps with rubber rings for cleanout pipe ends, etc., suspended under floor slabs/fixed on walls or on pipe racks in shafts. All suspenders, saddles, pipe pack s are to be quoted separately under relevant items.( Inclusive of verticals & horizontals at Internal Toilets ) 75mm Dia
21
229
4809
... More
Supply and fixing, of PVC soil, waste and vent pipes (SWR) confirming to IS13592 : 1990, type B with rubber ring (confirming to IS 5382) 6kg/sqcm with solvent joint inclusive of all necessary specials like bends, tees, offsets, door bends, junctions, screw type caps with rubber rings for cleanout pipe ends, etc., suspended under floor slabs/fixed on walls or on pipe racks in shafts. All suspenders, saddles, pipe pack s are to be quoted separately under relevant items.( Inclusive of verticals & horizontals at Internal Toilets ) 110mm Dia
87
555
48285
... More
Providing Fixing Testing & Commissioning Of PVC 6kg Pressure Pipe With Accessorise etc. Complete 40mm dia
15
592
8880
... More
Providing Fixing Testing & Commissioning Of PVC 6kg Pressure Pipe With Accessorise etc. Complete 50mm Dia
20
660
13200
... More
Providing Fixing Testing & Commissioning Of PVC Floor Trap With Accessorise etc. Complete 50mm Dia
8
1020
8160
... More
Inspection Chamber : Supplying and constructing brick masonry inspection chambers with 230/345mm brick masonary in cement mortar (1:4) mix, 20mm thick cement finish plastered internally and externally in cement mortar 1:4 mix incl. necessary excavation, foundation concrete 1:3:6 mix 150mm thick, top cover of FRP having 20T capacity, fixing in coping, S.W.G. half round channels 150mm dia, concrete haunches, and frame 16mm dia. C.I. rod rungs at 300 mm c/c etc. complete as shown on the drawing and/or directed and instructed by Engineer/Owner. NOTE: (Brick work to be 230mm thick upto 1.0M depth and 345mm thick beyond 1.0M depth).
4
28000
112000
... More
Providing, laying and fixing P.V.C. pipe of 200mm dia. type-B with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.
65
1965
127725
... More
Gully Traps : Supplying and fixing in position stone ware gully traps 150 x 150mm size with cover including brick masonary chamber of clear internal size as 300mmx300mm with cement plaster finishes
4
8000
32000
... More
Supply and laying of the following RCC Hume pipe including road cutting, excavation to a depth of 750mm, back filling as required for cable entry including the cost of sealing the ends and making good as required and complete in all respects: 300 MM DIA RCC HUME PIPES
24
1550
37200
... More
Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of low density polythyler and built corrugation including of delivery upto destination hoisting and fixing of accessoriess u chas inlet, outlet overflow of all tanks capacity above1000 to 20,000 litres
5000
11
55000
... More
5 H.P, 3 phase 440V 50Hz 2900Rpm KSB make Open well Submersible pump with Copper rotar & S.S Shaft. Each pump capacity 450 L.P.M at 30 Mtr discharge head with 3 Mtrs Submersible power cable.
1
32313
32313
... More
G.I Fabricated I.S.I “C” Class G.I Pipe/UPVC Sch-80 Pipe & Fittings For manifold with header for 2 Pump set. Including Branches pipe with fittings for each pump, Non-return valve, Butter fly valve with M.S Fabricated Flanges, nutt bolt, Warsher, Gasket & 65 m.m G.I main Header Etc.
1
34375
34375
... More
Sheet Steel Clad wall mounting Siemens gray powder coated electric control Panel control of 2 x 5 HP Open well Submersible pump having 40 AMP Incoming Isolating TPN-MCB, And 25 AMP Branch MCB, R.Y.B. indicating lights, control Fuses, voltmeter with selector switch Amp meter for reading current of any one Phase AUTO/MANUAL/OFF selector switches for each pump. L&T /Schneider make DOL Power Contactor and SPP type overload relay and single-phase preventer.Electronic Toggle relay for alternating of both pumps. Time Delay Relay for Auto On/Off Control relay.
1
28875
28875
... More
32 m.m U-flow make S.S body with Weather proof 230V Solenoid Valve with coil. Water Level Controller Control of Solenoid Valve & Dry Run Protection with Floater Switch & Censor. Control Cable Etc.
2
10313
20626
... More
Power & Control Cable from Panel to Pumps & Panel to Controls with Fittings. Approx. 25 Mtrs Each.
25
181
4525
... More
200 Ltrs Capacity Pre-Charged Diaghpram Pressure Tank
1
37125
37125
... More
Providing, laying and fixing, jointing Eco-drain 200mm SN4Nu-Drain Upvc pipes or of equivalent make, manufacture as per EN13476 or equivalent as per I.S.15328 with fittings such a bends, teestees, coupler etc, jointing with rubber lubricant including necessary excavation, trench refilling with selective excavated material etc. complete.
250
933
233250
... More
RWH - Recharge Pit Providing and constructing recharge pit of 2.0m deep and 1.0m dia of pre-cast RCC rings with 6.5" dia x 25m deep borewell at the floor of recharge pit including installation of combination of solid/perforated PVC casing pipe wrapped around with netlon mesh including 300mm thick sidefilling around outside of RCC rings (annular space) with 40mm size boulders including filling of recharge pit up to 0.5m depth with 25-75mm clean washed gravels from bottom up followed by 0.5m depth of 10-25mm of clean washed stones followed by 0.5m of washed river fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) including netlon mesh between each gravel/fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) media layer including covering with RCC slab, manhole frame & cover, PVC rungs, PVC endcaps, fittings etc. including arrangement for inlet & outlet pipe excavation & backfilling as shown in the drawing.The rate shall be inclusive of all labour, material, wastage, scaffolding, transportation, taxes, including all leads, lifts at all levels. All material should be of approved make. All works complete as per the drawing, technical specification and direction of the Engineer in charge.
6
91300
547800
... More
Providing and fixing high-density polyethylene (HDP) container one piece moulded water tank made out of high density polyethylene and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow pipe inclusive of all tanks capacity up to 20000 litres
5000
11
55000
... More
Providing, laying and fixing P.V.C. pipe of 200mm dia. type-B with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.
125
2825
353125
... More
LANDSCAP WORKS
-
-
-
... More
Lawn Plantation With Material :- Grassing with grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn free from weeds and filt for mowing including supplying good earth if needed (the good earth shall be paid for separately) In rows 5 cm apart in either direction.
343
3980
1365140
... More
Providing Laying and Preparing shrubbery :- Excavating the ground in all types of strata to required depth of 45 cm , removing and conveying unwanted stuff to a required distance as directed. Filling fresh garden soil and manure in excavated area in 3:1 proportion to a height of 30 cms. Mixing garden soil and manure thoroughly, well, levelling, watering on previous night. Planting well rooted shrubs 0.5 mtrs. apart as & when directed and maintaining till well established by watering, weeding, stirring, replacing casualties, etc. complete.
16
2000
32000
... More
Provinding and fixing Ring stone high glossy (43 X 35 CMS. HT. Planter)
10
32600
326000
... More
Provinding and fixing Ringstone XL BIG MATT (60 X 45 CMS. HT. Planter)
10
18600
186000
... More
Providing & Laying Loose riverwash rough river with Polish pebbles on site as Directed by Architect with minimum 150mm thk (Size 12 to 50 mm )
325
250
81250
... More
Providing structural steel work of rectangular hollow steel section for steel trusses, other similar trussed items like purlin and members with all bracing, gusset plates etc. as per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted/bolted/ welded connections and one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade complete
4
118790
475160
... More
Design, Supply , Insttaltion of Ferrari Fabric ( 902 S2) with SS and GI accessories for tenssion and Grip of the Fabric with Structure on Existing MS Structure Desiged for the Fabric and Shape given by arhchitect .
210
4500
945000
... More
Providing and fixing heavy duty inter locking concrete Rubber mould glossy paving blocks for outdoor landscape, of 80 mm thickness of having a strength of 400 Kilogram/ Sq.cm. of approved quality and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc. complete. (using 100% crushed sand) - Basic rate -120/- Sft
69
923
63687
... More
Removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. complete
328
45
14760
... More
Providing second class Burnt Brick masonry with conventional / I.S. type bricks in cement mortar 1:4 including scaffolding, racking out joints and watering etc. in pillar of rectangular shapes as shown in the drawings or as directed complete.
20
7928
158560
... More
Providing stone masonry work in cement mortar 1:3 in foundation with watering complete as per drawings and technical specifications etc. complete. (random rubble masonry)
35
5593
195755
... More
P&F Flooring 600 x 600 : Providing and fixing MATT FINISH ANTISKID tiles of minimum size 600 x 600 mm of about 10mm thick having water absorption less than 0.055 of approved make, shade and pattern for floor & dado in required position fixed on plaster of cement mortar 1:4 neat cement paste. including filing joints with neat white cement slurry curing cleaning etc. complete
35
4322
151270
... More
Providing and applying weather proof apex Ultima Paint two coats on external surface, or as per Direction by Enineer in Charge.
250
372
93000
... More
Providing and laying special flamed/ lappatro /Plain pre polished & other finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as Direction by the Engineer-in-Charge : Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent Basic Rate 200/Sft
120
4024
482880
... More
Providing Second class fly ash brick masonry with conventional / I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of two bars of 6 mm diameter / two hoop iron strips 25 mm x 1.60 mm at every third course, properly bent and bounded at ends scaffolding raking out joints and watering etc. complete.
30
1012
30360
... More
Ms fabrication work, Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete.
10
73844
738440
... More
ELECTRICAL WORK
-
-
-
... More
L T PANEL & DISTRIBUTION BOARDS
-
-
-
... More
MLTP PANEL
-
-
-
... More
Deisgning, Supplying, Transporting to project site, Installing the Main Panel on a suitable MS fabricated stand 300mm above the floor level in approved manner, fixing of all the switchgear, controlgear and instrumentation using all the accessoires, proper termination, wiring with suitable size lugs, testing and successful commisioning. The components and the protection type are as below as per SLD- 1. IP43, 16SWG - Overall, 14SWG - Gland plates, Top entry
2. Powder coated - RAL7310
3. Base frame - 100mm C channel
4. Incomer - ATS - __A
5. Outgoing - Lighting, AC, PDB, Utility with Timer and Contactors and APFC feeders
6. SPD for the Main Incomer and AC Feeder
7. Please refer the SLD
1
697500
697500
... More
STREET LIGHT PANEL
-
-
-
... More
Supplying, transporting to project site, installing and commissioning of floor mounted panel dust and vermin proof street light control panel in powder coated CRCA 14/16 SWG sheet,outdoor type, Single phase, 240 Volts consisted of suitable Mtring contactor, 24 Hrs Digital / Astronomical time switch, SPN MCB 63 Amp, Auto/manual selector switch, ON/OFF push buttons, indicator lamps, control wiring, metering device, etc for automatic opeMtrion & overcurrent, short circuit, earth fault protection of street lights upto the max load of 12 kW on provided iron frame / CC foundation. incorpoMtring the details as shown in the SLD.
1
48125
48125
... More
25.KVAR AHF Panel (Loc: Substaion Area)
-
-
-
... More
Supplying, transporting to project site, installing and commissioning of floor mounted panel dust and vermin proof incorpoMtring the details as shown in the SLD.
1
2685350
2685350
... More
Supply, installation, testing, and commissioning of following double door readymade recessed type MCB, DB, fabricated out of CRCA sheet and painted with powder coating process OR made out of scratch proof polycarbonate body and concealed in wall, or on surface or on steel column with necessary mounting frame complete as required along with gland covers at both ends IP43. (Make- Legrand or equivalent )
-
-
-
... More
12 Way TPN Per Phase Isolaton DB with 25A/32A/63A FP MCB as incomer, 3no. 25A/32A/63A DP RCCB, 30mA, Si for Phase segregation and 6A-32A SP MCB-36no. as outgoing as per SLD
2
35950
71900
... More
12 Way TPN Per Phase Isolaton DB with 25A/32A/63A FP MCB as incomer, 3no. 25A/32A/63A DP RCCB, 100mA, Si for Phase segregation and 6A-32A SP MCB-36no. as outgoing as per SLD
2
38950
77900
... More
12 Way TPN Per Phase Isolaton DB with 25A/32A/63A FP MCB as incomer, 3no. 25A/32A/63A DP RCCB, 300mA, Si for Phase segregation and 6A-32A SP MCB-36no. as outgoing as per SLD
1
41550
41550
... More
12 Way SPN DB with 25A/32A/63A DP RCCB as 30mA incomer, and 6A-32A SP MCB 10no. as outgoing as per SLD.
1
10100
10100
... More
4 Way VTPN DB with 63A MCB incomer, 32A TP MCB 2 nos and 6A-32A SP MCB 6no. as outgoing as per SLD.
1
38500
38500
... More
12 Way SPN DB with 25A/32A/63A DP MCB incomer, and 6A-32A SP MCB 10no. as outgoing as per SLD.
1
11500
11500
... More
Supply, fixing, testing, of good quality industrial sockets with MCB's or MCB isolators of different ratings in readymade IP 42/44 Polycabonate unbreakable enclosure. Box should be suitable to terminate cables / wires easily, complete as required.(Make- Legrand or equivalent )
-
-
-
... More
Supplying, transporting to project site, installing and commissioning of 63A, DP, MCB,10 KA in sheet metal enclosure.(Make- Legrand or equivalent )
2
7350
14700
... More
SITC of 3-Ph Power Sockets at Shop Floor for Outdoor AC Units with 32A/40A, 5Pin, Socket & Plug (3P+N+E) - 1no; 32A/40A, TPN MCB+ELCB (100mA) - 1no etc complete mounted in IP65 Box. Plug & Socket must be of IP65 Type. (Make- Legrand or equivalent )
1
24838
24838
... More
SITC of 3-Ph Power Sockets at Shop Floor for Outdoor AC Units with 63A, 5Pin, Socket & Plug (3P+N+E) - 1no; 63A, TP MCB+ELCB (100mA) - 1no etc complete mounted in IP65 Box. Plug & Socket must be of IP65 Type. (Make- Legrand or equivalent )
3
26963
80889
... More
CABLES AND END TERMINATIONS
-
-
-
... More
CABLES : Supplying and laying in ready built-up trenches / excavated trenches, through hume pipes laid by other agencies / on walls or on walls of lift shafts or on columns or on ceiling using G.I. spacers and G.I. saddles / G.I clamps made from G.I. strips, or on cable trays (cable tray supply & installation covered under item D.3) with nylon cable ties, the following XLPE insulated 1.1 KV grade, armoured and overall sheathed copper / aluminium conductor cables are made to IS:7098 (Part-l) 1988. Note: The quantity given in the quantity column is only indicative. The contractor shall bring to site cables as per actual requirement. Note: A2XFY/A2XWY stands for aluminium conductor armoured XLPE cable, 2XWY stands for Copper Conductor armoured XLPE cable.
-
-
-
... More
3.5C X 120 Sqmm. A2XFY Cable
70
1250
87500
... More
4C X 16 Sqmm. 2XWY Cable
50
1160
58000
... More
4C X 10 Sqmm. 2XWY Cable
375
840
315000
... More
4C X 6 Sqmm. 2XWY Cable
150
650
97500
... More
4C X 4 Sqmm. 2XWY Cable
140
410
57400
... More
3C X 4 Sqmm. 2XWY Cable
275
436
119900
... More
3C X 2.5 Sqmm. 2XWY Cable
134
325
43550
... More
3C X 2.5 Sqmm. YY Cable
260
215
55900
... More
1C X 16 Sqmm. YY Cable
115
410
47150
... More
1C X 6 Sqmm. YY Cable
100
134
13400
... More
EndTermination:Supplying and making end terminal joints to the following 1.1 KV grade PVC insulated armoured overall sheathed copper / aluminium conductor XLPE cables, using nickle plated cable glands, copper compression type cable sockets , PVC insulating tapes, etc.
-
-
-
... More
3.5C X 120 Sqmm. A2XFY Cable
2
2288
4576
... More
4C X 16 Sqmm. 2XWY Cable
6
316
1896
... More
4C X 10 Sqmm. YY Cable
46
295
13570
... More
4C X 6 Sqmm. 2XWY Cable
8
274
2192
... More
4C X 4 Sqmm. 2XWY Cable
6
274
1644
... More
3C X 6 Sqmm. 2XWY Cable
4
234
936
... More
3C X 4 Sqmm. 2XWY Cable
26
234
6084
... More
3C X 2.5 Sqmm. 2XWY Cable
14
195
2730
... More
3C X 2.5 Sqmm. YY Cable
110
150
16500
... More
1C X 16 Sqmm. YY Cable
64
395
25280
... More
1C X 6 Sqmm. YY Cable
50
150
7500
... More
LIGHT AND POWER POINT WIRING
-
-
-
... More
sub main Light Point wiring from distribution board to switch board using 2Rx2.5Sq.M.m & 1Rx1.5Sq.M.m FRLS PVC wire 1100 V grade in 25mm PVC conduit, including cost of providing saddles.
600
122
73200
... More
sub main Power Point wiring from distribution board to switch board using 2Rx2.5Sq.M.m & 1Rx2.5Sq.M.m FRLS PVC wire 1100 V grade in 25mm PVC conduit, including cost of providing saddles.
1850
265
490250
... More
sub main Power Point wiring from distribution board to switch board using 2Rx4Sq.M.m & 1Rx2.5Sq.M.m FRLS PVC wire 1100 V grade in 25mm PVC conduit, including cost of providing saddles.
50
310
15500
... More
sub main Light Point wiring from distribution board to switch board using 2Rx1.5Sq.M.m & 1Rx1Sq.M.m FRLS PVC wire 1100 V grade in 25mm PVC conduit, including cost of providing saddles.
585
190
111150
... More
SITC of Conceled/Above False ceiling Light Point with 25mm Medium Duty rigid PVC Conduit , 3 X1.5 sq. mm FRLS PVC Wiring along with Modular 6A Switch in modular box with all other required accessories etc. complete. ) . ISI Mark 25mm Rigid PVC Conduit must be consdered in this item. Wall chasing & reinstatement must be considered in this item only.
-
-
-
... More
SITC of Primary Light Point controlled by one 6A SP Switch.(Point Length will be Avg. 6Mtrs for first point from Switch Board .)
78
1460
113880
... More
SITC of Secondary Light Point.(Point Length will be Avg. 3Mtrs for first point to Second point .)
117
660
77220
... More
SITC of 2 way Light Point controlled by two 6A SP Switch.(Point Length will be Avg. 6Mtrs for first point from Switch Board .)
28
1850
51800
... More
SITC of conceled/above false ceiling Wall Fan Point with 2X1.5 sq. mm + 1X1 sq. mm FRLS PVC Wiring in pvc pipe (of ISI Make) along with Modular 6A Switch & 6A Socket in modular box with all other required accessories etc. complete. ( ONE POINT CONTROLLED BY ONE SWITCH ) . Point Length will be Avg. 6Mtrs for first point from Switch Board .
2
947
1894
... More
SITC of conceled/above false ceiling Ceiling Fan Point with 2X1.5 sq. mm + 1X1 sq. mm FRLS PVC Wiring in pvc pipe (of ISI Make) along with Modular 6A Switch & 5 Step Fan Speed Regulator in modular box with all other required accessories etc. complete. ( ONE POINT CONTROLLED BY ONE SWITCH ) . Point Length will be Avg. 6Mtrs for first point from Switch Board .
1
926
926
... More
SITC of conceled/above false ceiling Exhaust Fan Point with 2X1.5 sq. mm + 1X1.5sq. mm FRLS PVC Wiring in pvc Conduit (of ISI Make) along withModular 6A Switch in modular box with all other required accessories, Fan Box, Junction Boxes etc. complete. ( ONE POINT CONTROLLED BY ONE SWITCH ) Wall chasing & reinstatement must be of pipes. .
2
926
1852
... More
Supply, fixing, testing of readymade modular Power sockets with switch, in readymade modular box with switch plate. Box should be suitable to terminate flexible cables / wires easily, complete as required.(Make- Legrand or Equivalent )
-
-
-
... More
2 Nos of 6A 5-pin sockets and 1 Nos 16A SP switch in suitable backbox along with front plate.
60
1250
75000
... More
2 Nos of 16A 5-pin sockets and 2 Nos 16A SP switch in suitable backbox along with front plate.
5
1750
8750
... More
1 Nos of 6A 5-pin sockets and 1 Nos 6A SP switch in suitable backbox along with front plate.
14
670
9380
... More
1 Nos of 16A 5-pin sockets and 1 Nos 16A SP switch in suitable backbox along with front plate.
45
910
40950
... More
Supply & installation 6/16A 3 pin top for AC machine
15
345
5175
... More
LIGHT FIXTURE
-
-
-
... More
Supply, Installation & Commissioning of following lighting fixtures with required material including necessary accessories, wiring connection, chain, down drops, supports etc.(Make - Wipro, Havells, Legero 0r Equivalent)
-
-
-
... More
15 Watt Recess Mounted Downlighter
25
1230
30750
... More
9 Watt Recess Mounted Downlighter
60
1050
63000
... More
LED Strips 5watt/mtr with 25watt Driver.
25
3200
80000
... More
Floor Munted Decorative Light
1
25000
25000
... More
Supply and Installation of Wall light 2x12W Make - Wipro, Havells 0r Equivalent or as per Direction by Engineer In Charge.
20
9500
190000
... More
Supply & Installation of wall Light 2 x 18 Watt Make - Wipro, Havells 0r Equivalent or as per Direction by Engineer In Charge.
4
13500
54000
... More
Supply & installation LED Gate Post Lamp
2
20540
41080
... More
Supply and Installation of Suspended Decorative light Make - Wipro, Havells 0r Equivalent or as per Direction by Engineer In Charge.
2
42000
84000
... More
BLDC Ceiling fan, 26 watt to 30 watt, 1200 mm sweep, energy efficient Sweep, with regulator and remote control, suitable for single phase, 230V, 50Hz, A.C. supply operation complete with accessories such as 15" long down rod, canopies,
1
2500
2500
... More
Supply, Installation, Testing & commissioning of Occupancy / ultrasonic Sensor Make - Wipro, Havells 0r Equivalent or as per Direction by Engineer In Charge.
35
7100
248500
... More
STREET LIGHTING
-
-
-
... More
Supply & installation of 25W bollards.
15
5789
86837.25
... More
CABLE TRAY & TRUNKING
-
-
-
... More
Trunking & Cable Tray. Supply Installation Testing Commissioning of readymade hot dip GI perforated 2mm Thk Trays with coupler Plates with Plated Nut Bolts for Tray Connection, PVC Gaskets at each bend & branching on which cables passes to avoid cutting of cables . Including Manufactured bends, Tees, Reducers as required. Mtre to be quoted with erection on provided supports as supply & erection of supports is considered seperately.But GI Hardwarefor fixing cable trays to be inculded. Including supply & erection of Rubber Pads between cable tray & supports along with green passivated GI plated nut bolts for connetion.
-
-
-
... More
200X50 mm GI Perforated Cable Tray
55
523
28765
... More
300X50 mm GI Perforated Cable Tray
20
649
12980
... More
Trunking & Cable Tray. Supply Installation Testing Commissioning of readymade hot dip GI perforated 2mm Thk Trays with coupler Plates with Plated Nut Bolts for Tray Connection, PVC Gaskets at each bend & branching on which cables passes to avoid cutting of cables . Including Manufactured bends, Tees, Reducers as required. Mtre to be quoted with erection on provided supports as supply & erection of supports is considered seperately.But GI Hardwarefor fixing cable trays to be inculded. Including supply & erection of Rubber Pads between cable tray & supports along with green passivated GI plated nut bolts for connetion.
-
-
-
... More
200X50 mm GI Perforated Cable Tray Cover
5
523
2615
... More
300X50 mm GI Perforated Cable Tray Cover
10
649
6490
... More
Supply and Installation of tie rod of 10 mm full threaded type with slotted channel as required for mounting of cable tray.Note- 1set include two nos of vertical rod and one horizontal slotted channel complete with anchoring in the ceiling. (For cable Tray support)
70
283
19810
... More
SITC of M.S fabricated supports for cable trays of M.S sections (ISA/ISMC/ISMB/Plates/Flats etc.) welded to structure / clamped to sturucture / wall, using anchor bolts where required including G.I. hardware & painting with Two coats of Red oxide primer & 2 coats of enmel paint of approved shade. (colour As per Ex. Plant) (Fabrication & Erection to be quoted under erection under, supply include only steel supply.)
50
183
9150
... More
Supply, Installation, laying & terminating of PVC Trunking 100X50
20
756
15120
... More
RACEWAY AND PVC CONDUITS
-
-
-
... More
PVC conduits,Aluminium Raceway & Floor Junction Box: - Supplying, Installation, Testing & Commissioning of following G.I junciton boxes in floor of 14 SWG thick duly painted. The rate shall be inclusive of providing Sand, Cement etc. and finishing the same upto the floor level as per instructions of the Architect. MK make or equivalent Junction box
-
-
-
... More
100 x 40 mm Aluminium raceways, 2mm thick.
202
738
149076
... More
Supplying and fixing Floor Junction Box (Weatherproof )with knock-outs on all sides suitable for Raceways/conduits. The knock out shall be removed at site as per requirements. The junction boxes shall be laid in trenches for Raceways/conduits . The top cover shall be fixed with counter sunk screws. (For floor trenches).
-
-
-
... More
300x300mm
2
1695
3390
... More
250x250mm
7
1455
10185
... More
150x150mm
40
1270
50800
... More
100x100mm
37
1029
38073
... More
Providing & Fixing 2mm thick SS cover plates.
Cover plates shall be champhered at all edges
-
-
-
... More
450mm X 450mm X 2mm for tile mounting.
2
3750
7500
... More
350mm X 350mm X 2mm for tile mounting.
2
2900
5800
... More
250mm X 250mm X 2mm for tile mounting.
40
1800
72000
... More
200mm X 200mm X 2mm for tile mounting.
2
826
1652
... More
Supply, Installation, laying & terminating of 25mm FR MMS ISI Mark PVC conduits in floor/ceiling with junction & complte with its all accessories. (Make- Precision or Equivalent )
200
56
11200
... More
Supply, Installation, laying & terminating of 32mm FR MMS ISI Mark PVC conduits in floor/ceiling with junction & complte with its all accessories. (Make- Precision or Equivalent )
150
76
11400
... More
Supply, Installation, laying & terminating of 20mm ISI FR Mark PVC Flexible conduits in floor/ceiling with junction & complte with its all accessories. (Make- Precision or Equivalent )
230
25
5750
... More
Supply, Installation, laying & terminating of 25mm ISI FR Mark PVC Flexible conduits in floor/ceiling with junction & complte with its all accessories. (Make- Precision or Equivalent )
50
32
1600
... More
Providing & fixing of Readymade Polycorbonate unbreakable Junction box with 15A, 4way connectors and knowout for 4 cable entry of following size.
-
-
-
... More
100 x 100 x 50mm.IP65
4
1150
4600
... More
300 x 300 x 50mm. IP65
2
2250
4500
... More
EARTHING PROTECTION
-
-
-
... More
SITC of Early Streamer Type Lightning arrester with Covering Protection Radius of 65 mtrs to be installed on top of the factory roof, with proper clamping of down earth conductor for connection of lightning arrestor to earth pit (supply of down conductor is considered in other item). with Event Counter etc complete. (Lightening Protection for Factory Area) (Similar to Make - Indelec, Protection Level II, )
1
188500
188500
... More
Supply, installation, testing of disconnecting link box for lightning down conductor at 1mtr. from GL with SMC insulator & Gunmetal disconnecting link of 50x6mm GI conductor and 250mm.long with bolting arrangement for brass bolts & nuts of 12mmØ complete as required.
-
-
-
... More
Earthing using maintenance free earth electrode with chemical treatment 3mtr. Long, inner pipe dia 40mm & outer pipe dia 80mm, Including boring of hole upto 6.5 mtrs. in all types of strata as required. The electrode shall be electrolytic grade GI tube pre-filled with hygroscopic powder and low resistive backfill material. (Earth Resistance value shall be achieved to less than 2 ohm)
2
22000
44000
... More
Earthing using Maintenance free earth electrode with chemical treatment, 3mtr long, 32mm dia. high tensile, low carbon steel circular rod with molecularly bonded Copper of thickness 250 Micron on outer surface, 50x6mm Cu earthing strip from electrode terminal upto disconnecting link in chamber at top etc. Scope includes boring hole upto 6.5 mtrs in all types of strata as required.
2
30000
60000
... More
Supply, fixing / placing of PVC pipe of 150mm dia.as casing to the earthing pit only for filling portion to retain surrounding soil. (Casing shall remain permanent for this filling area.)
5
2200
11000
... More
Additional cost of Concrete inspection chamber with heavy duty concrete cover in lieu of brick masonary chamber & C.I. cover. Concrete chamber & cover shall be suitable for movement area / roads.
4
5700
22800
... More
Supply, tagging, laying or fixing, testing of GI / CU earthing strip / wire in ground at a depth of 600mm including excavation in all type of strata except hard rock or in readymade trenches with necessary clamps, revette jointing as per specification complete as required.
-
-
-
... More
25mm x 6 mm thick GI strip.
60
218
13080
... More
25mm x 3 mm thick CU strip.
40
810
32400
... More
25mm x 3 mm GI Strip down conductor mounted on porcelain insulator for Lightning Arrestor.
50
310
15500
... More
Supply and installation of earth busbar box consisting of 50 x 6 mm, 300mm long GI. Strip with multiple tapping and nut bolt arrangements etc. mounted on SMC insulators. Box shall be fabricated from M.S. sheet including powder coated, clear acrylic hinged door etc. complete.
2
6000
12000
... More
UPS SYSTEM
-
-
-
... More
Supply,Installation, testing & commissioning of 3Phase Input & 3Phase Output UPS with 30 minutes Battery back up and sealed maintenance free lead acid maintained in battery racks complete with interconnections, Cu battery cables, Battery breakers. The rack shall be sturdy M.S. section fabricated with powder coating The scope shall include terminals & busbar shrouding for Battery terminals & connections. (Note:- Battery store shall start 150mm above FFL.)
-
-
-
... More
1 No. x 15kVA UPS arrangement as per given specifications and details.
1
180000
180000
... More
Supply, Installation of Sealed maintenance free valve regulated lead acid (VRLA) Battery (with reverse polarity protection MCCB) as per specifications complete suitable for following UPS sizes (Bidder should furnish the battery calculations for 30 minutes backup along with the BOQ). Note: The scope also includes complete SITC of cables, DCDBs, DC MCBs, required for battery interconnection as well as interconnections betwwen batteries and UPS with required all accessories.
-
-
-
... More
15 KVA UPS (30 minutes).
1
150000
150000
... More
Installation of battery rack floor mounting as per specifications with necessary fabrication complete for following sizes.
-
-
-
... More
15 KVA UPS (30 minutes).
1
10000
10000
... More
MISCELLANEOUS ITEMS
-
-
-
... More
Supply, installation of material equipment required as per statutorial provision & safety.
-
-
-
... More
1.1 kV class Handgloves pair.
1
1500
1500
... More
Laminated First aid chart with frame.
1
1200
1200
... More
First aid box.
1
1600
1600
... More
3 Nos. of Fire buckets with stand having weather shed canopy above the buckets with duly filled coarse sand and "FIRE" wriiten in English & "AAG" written in local (devnagari) language.
1
3500
3500
... More
4.5 Kg. Co2 fire extinguisher mounted on wall. The Co2 Cylinder should be seamless type, ISI marked with monitoring tag & certificate. Vendor to also consider required identification mark (Std color coding, the extinguisher should be visible in No lights) as per Fire / IS Norms.
1
10900
10900
... More
High Voltage Electrical Insulation Synthetic Mats, ISI Marked,confirming to IS:15652-2006. Types: Class C; for 1100V, Flame Retardant, Shock Proof, 1000 mm in width, pastable, Acid/Alkali/Diesel/Oil Resistant, CPRI/ERDA tested & Approved, Black/Gray in color etc.
5
2250
11250
... More
415V Dangerboards of appropriate size & marking.
1
825
825
... More
DISMANTLING WORK
-
-
-
... More
Dismantling of existing Wire of all types and size up to 10 sq. mm.
500
12
6000
... More
Dismantling of existing Armoured and Flexible cables of all types and size up to 10 sq. mm.
400
43
17200
... More
Dismantling of existing cables of all types and size up to 50 sq. mm.
200
18
3600
... More
Dismantling of existing Cable Termination. ( Gland,Lugs)
100
25
2500
... More
Dismantling of existing Cat-6,Tel,Camera cables.
500
13
6500
... More
Dismantling of existing Fiber Optic cables.
50
10
500
... More
Dismantling the existing Switch Plate,Data Accss,Fire Accessories,Camera accessories.
150
60
9000
... More
Dismantling the existing DB and Network Rack
5
475
2375
... More
Dismantling the existing PVC Trunking/Conduit.
50
45
2250
... More
Dismantling the existing W.T.fluoroscent fitting / S.V./ M.V/MH.lamp /LED fitting from wall with brackets and making the site as origina lcomplete.(All type of lights)
75
125
9375
... More
Dismantling the existing ceiling fan/exhaust fan/cabin fan/bracket fan complete with accessories, G.I. down rod, frame etc. and making the site clear.
20
31
620
... More
Dismantling the existing Panel
1
4800
4800
... More
Dismantling of existing Insect Catcher Machine.
1
200
200
... More
Dismantling of existing Cable Tray.
20
50
1000
... More
Dismantling the Earthing Strip and Conductor.
25
17
425
... More
NETWORKING & TELEPHONE SYSTEM
-
-
-
... More
Supply,installation, laying and commissioning Cat 6 UTP cable with accessories i.e.conduit pipe, clamp etc.Complete
1250
136
170000
... More
Supply, Installation testing and commissioning RJ-45 Cat-6 Information Outlet with face plate with accessories i.e.conduit pipe,clamp etc.
39
698
27222
... More
Supply,installation, laying and commissioning Cat 6 UTP cable with accessories i.e.conduit pipe,clamp etc. Complete
415
123
51045
... More
Supply, Installation testing and commissioning RJ-11 Information Outlet with face plate
13
566
7358
... More
Supply, Installation testing and commissioning Cat-6 Patch cord 2 meter at user end.
80
386
30880
... More
Supply, Installation testing, jumpering and commissioning 100 +100 Pair MDF Box with krone module.
1
13533
13533
... More
Supply, Installation testing and commissioning 50 Pair riser Cable with termination,punching & jumpering of telephone cable
50
1150
57500
... More
Supply, installation, testing and commissioning 12U Rack wall Mounting
1
15515
15515
... More
Supply, Laying, termination & Commissioning of RG-6 TV CABLE
100
113
11300
... More
Supply, Installation, Termination & Commissioning of TV socket termination box with blank PVC cover plate and GI Box .
2
470
940
... More
Providing & Fixing LIU Loaded
2
27875
55750
... More
Providing & Fixing Fiber Patch Cord
4
2363
9452
... More
Supply Laying and installation of Armourd Single mode OFC 12 Core with laying charges
250
255
63750
... More
Supply Installation testing & Commissiong of fiber splicing for camera work (per pair) or as per Direction by Engineer In Charge.
48
1188
57024
... More
Supply Installation testing & Commssiong of Fiber termination box for outdoor camera, or as per Direction by Engineer Incharge.
1
1580
1580
... More
Supply, Installation, Testing & Commissioning of 40mm HDPE pipe
150
400
60000
... More
Supply Installation Testing & Commissioning of Network Switches HP JL828A or Equivalent or as per Direction by Engineer In Charge.
2
180000
360000
... More
SITC of fully loaded patch panel.
2
8500
17000
... More
CCTV SYSTEM
-
-
-
... More
Supply, Installation, Testing & Commissioning of PTZ Camera with internal IR Illuminator
3
154000
462000
... More
Supply, Installation, Testing & Commissioning of Bullet Camera
5
72450
362250
... More
Supply, Installation, Testing & Commissioning of Dome Camera
14
72433
1014066.62
... More
Supply, Installation, Testing & Commissioning of NVR 32 CH with 80TB Storage
1
650000
650000
... More
Supply, Installation, Testing & Commissioning of 8 Port PoE Switch with 2 SFP Ports (Industrial Grade)
4
56650
226600
... More
Supply, installation, testing and commissioning 12U Rack wall Mounting
2
15515
31030
... More
Supply, Installation, Testing & Commissioning of 49" LED Professional Monitor
1
82600
82600
... More
Supply, Installation, Testing & Commissioning of 4K HDMI Cable 10 Meter length
1
18500
18500
... More
Providing & fixing Cat 6 IO camera & rack side
44
275
12100
... More
LIU Loaded
2
27875
55750
... More
Fiber Patch Cord
4
2363
9452
... More
Supply, Installation, Testing & Commissioning of Security Signage
4
12390
49560
... More
PA SYSTEM
-
-
-
... More
SITC ceiling/wall mounted 6W speaker with line matching transformer including necessary accessories Make Honeywell
23
1366
31418
... More
Supply of Booster Amplifier for PA system with RMS output (actual) 240 W . 240W,Power reduction on backup
power -1 dB,Frequency response ,60 Hz to 18 kHz (+1 / -3 dB at-10 dB ref. rated output,Distortion,<1% at rated output, 1 kHz,Max power consumption 1600 VA, Multiple outputs - 70 V / 100 V and 8/4 ohm,Temperature controlled forced front to back ventilation, directly stackable. Make BOSCH
1
43000
43000
... More
SITC of Speaker Cable 2 core X 1.5 sqmm shielded Audio cable. Legrabd Make
350
121
42350
... More
Table Top microphone with mounting stand.
1
12083
12083
... More
RODENT REPELLENT SYSTEM
-
-
-
... More
Supply, Installation, laying & commissioning of VHFO v2 Controller (IDEMI and CFTRI certification , produce high decibel sound waves at very high frequency not less than 20 Khz , MS Powder Coated Stands , Graphical LCD display , UL and CE approved transformers for power supply. )
2
17300
34600
... More
Supply, Installation, laying & commissioning of Transducers (minimum at 400sft coverage each )
44
1250
55000
... More
Supply, Installation, laying & commissioning of 2 core 0.5sq. mm , Flexible (14/40) SWG multistranded , Specially coated CT wires , Make - Nickon / Landmark / STD /equivalent Cables with conduit
400
65
26000
... More
TOTAL RODENT REPELLENT SYSTEM
-
-
-
... More
FIRE ALARM SYSTEM
-
-
-
... More
Supply, installation, testing and commissioning of 2 loop analogue addressable fire alarm panel with battery backup, it is a 318-point addressable fire alarm control panel with optional Digital Alarm Communicator / Transmitter and expandable to 636 addressable points with an optional second Signaling Line Circuit. Each loop support 159 detector & 159 devices.
1
212220
212220
... More
S/I/T/C of Repeater Panel Make Honeywell Morley UL Approved
1
175000
175000
... More
S/I/T/C of Addressable Multisensor/ Photoelectric Detector with mounting base Make Honeywell Morley
52
3950
205400
... More
S/I/T/C of Addressable Response Indicator.
26
420
10920
... More
S/I/T/C of Addressable Manual Call Point.
4
7225
28900
... More
S/I/T/C of Addressable Stob Light Hooter
4
9400
37600
... More
S/I/T/C of Addressable Relay Out Put Module
2
11450
22900
... More
S/I/T/C of Addressable Isolator Module
2
7000
14000
... More
S/I/T/C of Addressable Module
2
7125
14250
... More
S/I/T/C of Addressable Control Module.
2
7795
15590
... More
Supply and Laying 2 Core x 1.5 sq. mm Polycab Make, Copper Armored Cable.
700
185
129500
... More
Supply & Installation of UPS / BATTERY of Exide co.
4
2145
8580
... More
FIRE FIGHTING WORK
-
-
-
... More
Providing & Fixing of Fire Water Tank Model No. ZA07R2 Metal Storege 50 Kl Capicity ZnAI Tank. FM Approved Dia (Mtr) 6.46 Height (Mtr) 2.10 Gross Value ltr 68,795, each Tank Tank shall Included wall, self Supporting Dome roof 2 Nos of HDG Nozzel F&B type level Indicator Turbine vent (SS) Access hatch on Roof of TAnk External Cage Laddder & International Rope Ladder with Installation as per Installed JNPT Project.
1
1008500
1008500
... More
SITC of MS ERW Piping as per IS : 1239,part-I, heavy grade up to 150 NB and IS:3589, 6.35 mm thickness, including pipe fittings ,flanges, pipe supports such as c clamps, threaded rods, fastners.
-
-
-
... More
150 mm NB 'C' Class
20
5350
107000
... More
SITC of double flanged wafer type lever operated / wheel operated Butterfly valve of 200 psi Mtring including matching flanges, bolts/studs, nuts, washers & gaskets.
-
-
-
... More
Butterfly Valve 150 mm dia with matching flange, nut & bolt etc. Make Marc/Turbo/ Normex /Equvt
2
8960
17920
... More
Supplying and erecting 200 mm dia Cast Iron end line strainer of Y-type flanged end pattern, PN16 pressure Mtring, screen of SS end connection with Flanged / Screwed / Socket Weld / Butt Weld End etc with standard OAR (open area Mtrio) for positive suction complete as per specification no. FF-VL/ELS
1
21356
21356
... More
FIRE HYDRANT SYSTEM
-
-
-
... More
SITC of MS ERW Black Pipe as Per IS : 3589 / 6.3mm thick & IS 1239 / II 'C' Class, with fittings IS 1239/II heavy grade including MS plate fabricated flange to ASA 150 LBS Mtring with accessories plus consumable for Underground pipes protection with by coating & wrapping with anticrrosive tape complete with required structural support if any as per spec
-
-
-
... More
150 mm NB 'C' Class
130
5350
695500
... More
100 mm NB 'C' Class
5
4165
20825
... More
80 mm NB ‘C’ Class
5
3148
15740
... More
SITC of MS ERW Black Pipe as Per IS : 3589 / 6.3mm thick Gr. Fe 410 & IS 1239 / I- 'C' Class, with Fittings to suiitable pipe Fabricated IS : 3589 / 6.3mm thick / IS : 1239 / II - Heavy Grade, including MS Plate Fabricated Flanges to IS / DIN / ASA 150 LBS Mtring & Above ground Pipe Protection (Painting)and all required 'supports etc.
-
-
-
... More
150 mm NB 'C' Class
80
5276
422080
... More
100 mm NB 'C' Class
5
4220
21100
... More
80 mm NB ‘C’ Class
8
2880
23040
... More
SITC of double flanged wafer type lever opeRated / wheel opeRated butterfly valve of 200 psi Mtring including matching flanges, bolts/studs, nuts, washers & gaskets.
-
-
-
... More
Supplying and erecting 150 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure Mtring, as per specification no. FF-VL/BFV
3
6416
19248
... More
SITC of oblique type stainless steel single headed hydrant valve with 63mm female instantaneous outlet angled towards ground as per IS 5290-Type A, including matching flanges ,bolts ,studs, nuts, washers, gaskets.
-
-
-
... More
External
4
11350
45400
... More
Internal
4
12430
49720
... More
SITC of stainless steel body Orifice plate of suitable inner bore along with matching flange.
6
2410
14460
... More
SITC of M. S. Hose Box of size 750 x 600 x 250mm-16swg thick fire red color from outside & white enamal from inside - front glass paited with " fire " with key, handle and brass hinges -to accommodate 2 nos of 15mtrs long hose and 1 branch pipe.
-
-
-
... More
External
4
11530
46120
... More
Internal
4
11456
45824
... More
SITC of 63mm dia stainless steel universal branch pipe as per IS 2871
16
3545
56720
... More
SITC of Fire fighting hose as per IS 14933 ( Type -A) . The fire hose shall be 15 mtrs long with 63mm dia stainless steel couplings at both end
-
-
-
... More
15 m Long
16
9000
144000
... More
SITC of GM air release valve .
-
-
-
... More
Supplying and erecting 20/25mm dia gun metal air release cock, with necessary G.I. coupling to be fitted on top of air vessel or on wet riser complete as per specification no. FF-FFA/ARV
4
884
3536
... More
Supplying and installing wall mounting swinging hose reel drum fitted with 19 mm dia. 30m long high pressure polypropylene (Polyhose) alongwith necessary accessories complete as per specification no. FF-FFA/HV
4
7023
28092
... More
upplying and erecting 25 mm Ball Valve complete with PN16 pressure Mtring, as per specification no. FF-VL/BV
8
1475
11800
... More
SITC of 150NB Four way Siamese Connection for hydrant network with 4 nos. of 63 mm instantaneous inlets in glass fronted wall box having inbuilt non return valve and 150mm BFV with fittings, nut, bolts & washers.
1
21470
21470
... More
Supplying and erecting 150 mm dia cast iron double flange ball type NRV complete with PN16 pressure Mtring, as per specification no. FF-VL/NRV
1
28549
28549
... More
Providing & Fixing in position, MS fabrication work using angles, sqr tubes, c channels etc for various partition frame as per Design & Instructions & Complete in all aspects . including all materials labour,finishing etc complete
100
183
18300
... More
FIRE SPRINKLER SYSTEM
-
-
-
... More
Supplying, erecting, testing and commissioning of Upright/ Pendent quartzoid bulb sprinkler, 15 mm (½") dia. NBCM Body chrome finished, 68º C fixed tempeMtrure Mtring with deflector disc of conventional construction complete as per specification no. FF-SPR./UP
134
448
60032
... More
SITC of SS Flexible Drop 1500mm/1200mm Length along with fitting materials.
67
2730
182910
... More
SITC of MS ERW Black Pipe as Per IS : 3589 / 6.3mm thick Gr. Fe 410 & IS 1239 / I- 'C' Class, with Fittings to suiitable pipe Fabricated IS : 3589 / 6.3mm thick / IS : 1239 / II - Heavy Grade, including MS Plate Fabricated Flanges to IS / DIN / ASA 150 LBS Mtring & Aboveground Pipe Protection (Painting) and all required 'supports etc.
-
-
-
... More
100 mm NB 'C' Class
30
4220
126600
... More
80 mm NB ‘C’ Class
30
3132
93960
... More
65 mm NB ‘C’ Class
6
2438
14628
... More
40 mm NB ‘C’ Class
66
1500
99000
... More
32 mm NB ‘C’ Class
69
1125
77625
... More
25 mm NB ‘C’ Class
88
785
69080
... More
Supplying and erecting, testing and commissioning of 150 mm dia. installation control valve (Alarm Valve) of cast iron body, brass/bronze working parts comprising of water motor alarm, bronze seat clapper, clapper arm and hydraulically driven mechanical gong bell to sound continuous alarm when the wet riser/sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch,cock valve complete with drain valve and bypass, test control box, ball valves, MS pipes of required size, flanges, orifice plate, gasket etc. complete as per specification no. FF-VL/ICV
1
39143
39143
... More
Butterfly Valve 150 mm dia with matching flange, nut & bolt etc. Make Marc/Turbo/ Normex /Equvt
2
8960
17920
... More
Supplying and erecting 100 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure Mtring, as per specification no. FF-VL/BFV
2
4317
8634
... More
Supplying and erecting 75/80 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure Mtring, as per specification no. FFVL/BFV
1
3222
3222
... More
SITC of Water flow switch of 80 mm
4
11350
45400
... More
Supplying and erecting 25 mm Ball Valve complete with PN16 pressure Mtring,
as per specification no. FF-VL/BV
4
1475
5900
... More
Fire Extingusher
-
-
-
... More
Clean gas Agent ( NAF P IV )
5
17500
87500
... More
Co2 type of Fire extinguisher of 4.5 Kg cap. complete ready for use as per IS 2171 having ISI Mark /Seasfire
1
10900
10900
... More
Providing and fixing fire bucket and stand as per site requirement or as per directed by engineer in charge.
1
6540
6540
... More
Supply, installation, Testing & commissioning of Evacation map A3 Size os per design & Drawing or as per direction by Engineer In Charge
2
5800
11600
... More
Supply, installation, Testing & commissioning of autoglow Sinages os per design & Drawing or as per direction by Engineer In Charge
4
1250
5000
... More
Supply, installation, Testing & commissioning of LED Fire exit sinages os per design & Drawing or as per direction by Engineer In Charge Make - Prolight or Equivalent
8
5500
44000
... More
HVAC SYSTEM
-
-
-
... More
HIGHSIDE EQUIPMENTS
-
-
-
... More
VRF Outdoor units
-
-
-
... More
Supply of inverter /Digital scroll compressor with Variable refrigerant system connectable to multiple indoor units. Outdoor unit shall be factory assembled weather proof casing constructed from heavy gauge mild steel panels. The unit shall be completely factory wired and tested with necessary controls and charged with refrigerant. The compressor shall be highly efficient scroll type. The aluminium fins shall be covered with anti-corrosion resin. Unit shall be equipped with oil recovery system to ensure stable operation with long refrigerant piping. Units shall be tested and commissioned with additional refrigerant.
-
-
-
... More
Supply of Outdoor unit
54
26400
1425600
... More
VRF Indoor units
-
-
-
... More
CEILING MOUNTED COMPACT CASSETTE with wireless remote controller
-
-
-
... More
2.0TR - 4-Way Cassette
4
58500
234000
... More
2.6TR - 4-Way Cassette
7
64000
448000
... More
4.0 TR - 4-Way Cassette
3
68700
206100
... More
Refnut Joints
-
-
-
... More
Supply of Variable refrigerant flow distribution REFNUTS / T Joints (pair) in the suction & Liquid lines for various sizes of copper refrigerant piping including insulation etc. as required.
13
4750
61750
... More
Supply, Installation, Testing & Commissioning of Energy Manaeger CRC
1
296800
296800
... More
LOW SIDE INSTALLATION
-
-
-
... More
VRF (Cooling only) INDOOR UNIT & OUTDOOR UNITS
-
-
-
... More
Installation, Testing & Commissioning of inverter /Digital scroll compressor with Variable refrigerant system connectable to multiple indoor units. Outdoor unit shall be Including rubber pads for outdoor units etc.
-
-
-
... More
Installation of Outdoor Unit
3
25000
75000
... More
VRF Indoor units
-
-
-
... More
Standard Installation Charges for:
-
-
-
... More
Installation of Indoor Unit Cassette Unit
14
7250
101500
... More
Refnut Joints
-
-
-
... More
Installation Refnet (Y Joint)
13
1250
16250
... More
Outdoor Units Stand
-
-
-
... More
Fabrication and installation of MS base frame for outdoor units complete with epoxy painting, vibration isolation pads, supports, hangers, brackets etc.
-
-
-
... More
MS Fabricated stand for Outdoor Unit
3
15000
45000
... More
Gas Charging Pressure Testing, Nitrogen flushing, gas charging,& testing of the airconditionign system.
-
-
-
... More
Additional Gas Charging with R-410A Gas for Outdoor Unit
3
32000
96000
... More
Commisioning charges of ODU Unit
3
40000
120000
... More
Refrigerant Piping with K flex insulation & necessary support
-
-
-
... More
Refrigerant Piping with Superlon insulation & necessary support - VRV system
250
3581
895250
... More
Copper Cable
-
-
-
... More
Supply Installation & Testing of Control Cabling from indoor to outdoor unit.
-
-
-
... More
2 C x 1.5Sqmm
230
220
50600
... More
Supply, Installation & Testing of power cabling from Indoor unit to supply point with Flexible copper cable
-
-
-
... More
4 C x 2.5Sqmm
40
250
10000
... More
4C x 10Sqmm copper Armoured cable for Outdoor unit supply
12
630
7560
... More
Drain Pipe
-
-
-
... More
Supply and Installation of PVC Drain piping with 6mm thick closed cell nitrile rubber tubular Installation with Necessary supports, screws, etc. Required u trap for all machines.
-
-
-
... More
25mm Dia
22
198
4356
... More
32mm Dia
30
210
6300
... More
40mm Dia
50
240
12000
... More
Sheet Metal Works - (Exhaust Air & Fresh Air)
-
-
-
... More
Supply, installation of sheet metal RECTANGULAR DUCTS complete with all accessories like flanges, all necessary MS supports with epoxy Painting, suspension rods , anchor bolts, GI bolts & nuts, etc.
-
-
-
... More
24 gauge (0.60mm)
80
1690
135200
... More
Supply & Installation of Insulated Flexible duct for Supply air with supporting arrangemnt etc.
-
-
-
... More
100 - mm Dia
20
410
8200
... More
VENTILATION SYSTEM
-
-
-
... More
Toilet Ventilation Fan - In-line Fan cabinet / circular type
-
-
-
... More
Supply, installation, testing, and commissioning of in-line fans comprising of Class I construction complete with TEFC induction motor
-
-
-
... More
450cfm / 10mm SP
2
26250
52500
... More
500cfm / 10mm SP
2
28100
56200
... More
Fresh Air line Fan cabinet / circular type with filter
-
-
-
... More
1000cfm / 30mm SP
2
52500
105000
... More
Toilet Ventilation Fan - In-line Fan cabinet / circular type
-
-
-
... More
Air Distribution
-
-
-
... More
Supply & Installation of - Aluminimum powder coated EXHAUST air grille 150 x150mm/ Disk Valve
15
975
14625
... More
Supply & Installation of Non Insulated Flexible duct for Exhasut air with supporting arrangemnt etc.
-
-
-
... More
100 - mm Dia
20
330
6600
... More
Supply , installation,testing and commissioning of Fire retardent canvass connection to connect Fan mouth and duct with necassy supports and fittings,
12
1980
23760
... More
Supply & Installation of GI cable tray to protect the exposed refrigerant pipes
-
-
-
... More
Cable tray with cover (300 mm x 75 mm)
10
1140
11400
... More
Cable tray with cover (450 mm x 75 mm)
10
1255
12550
... More
Supply , installation of Out Door Unit Cowl Piece.
3
30000
90000
... More
2nd Year After Completion of Defectliability Period.
54
4750
256500
... More
3rd Year After Completion of Defectliability Period.
54
5280
285120
... More
4th Year After Completion of Defectliability Period.
54
5800
313200
... More
5th Year After Completion of Defectliability Period.
54
6390
345060
... More
AV WORK
-
-
-
... More
Supply, Installation & Commissioning of Crystal LED Display
-
-
-
... More
55 inch 4K Crystal UHD LED Display
4
59000
236000
... More
65 inch 4K Crystal UHD LED Display for Business
1
88100
88100
... More
75 inch 4K Crystal UHD LED Display for Business
4
135200
540800
... More
Supply, Installation & Commissioning of86 inch Interactive whiteboard 2.18 m.
1
310700
310700
... More
Supply, Installation & Commissioning of 5 ft drop Ceiling mountTV Stand
1
4500
4500
... More
Supply, Installation & Commissioning of 4K PTZ Camera & 4K UHD camera, 71–degree Wide–angle Lens & 12 Times Optical Zoom Make - Kramer & Equivalent
2
175000
350000
... More
Supply, Installation & Commissioning of Adjustable sound bar bracket
1
5000
5000
... More
Supply, Installation & Commissioning of Audio Bar with Extention microphones Make - Kramer & Equivalent
1
190000
190000
... More
Supply, Installation & Commissioning of USB—C Hub Multiport Adapter, 4K@60 HDMI output, 4K@60 DisplayPort output, USB 3.2 Gen 1 data and charging ports, Ethernet port, USB—C charging pass—through, Headset+mic port. Make - Kramer & Equivalent
1
35750
35750
... More
Supply, Installation & Commissioning of 20–Port Audio Matrix with DSP, AEC and Interchangeable Inputs & Outputs,includes multi−channel DSP, AEC (Acoustic Echo Cancellation), mini USB, built−in 2x60W @ 8Ω and 1x120W @ 70V / 100V power amplifier, 4x4 Dante interface, HDMI embedding and de−embedding, USB, and S/PDIF.
1
405600
405600
... More
Supply, Installation & Commissioning of Class D High−performance 240W Power Amplifier, 2 x 120W @ 4/8Ω,1 x 240W @ 70V/100V, selectable Hi−Z (70V/100V) or Lo−Z (4Ω/8Ω) power amplifier featuring balanced and unbalanced inputs and additional line−level output. This versatile amplifier features built−in DSP, auto−standby and maximum durability. INPUTS: 1 unbalanced stereo on a 3.5mm connector ,1 balanced stereo +4dBu/10kΩ on a 5 pin terminal block, OUTPUTS: 1 balanced stereo line level on a 5–pin terminal block,1 stereo or 1 mono speaker output on a 4 pin large terminal block. It includes layers of protection against over–current, DC voltage at the outputs, high frequency, and over–heating with intelligent, heat–sensitive fans for added protection. Make - Kramer & Equivalent
1
135000
135000
... More
Supply, Installation & Commissioning of 6.5–Inch, 2–Way Closed–Back Ceiling Speakers,Power Handling — 30W RMS, 80W Continuous, Impedance — 8Ω. UL 1480 & 2043 Listed Make - Kramer & Equivalent
4
44000
176000
... More
Supply, Installation & Commissioning of Gooseneck Microphone with Base & Programmable Mute switch - Supply, Installation, Testing & Commissioning of metal Gooseneck with base ( ON/OFF button needed) and integrated Sennheiser KE10 microphone capsule,RF shielding against intermodulation from wireless devices, Streamlined design for seamless integration, Impedance < 100 Ω ,Frequency response (Microphone) 50 Hz - 20 kHz ,transducer principle (Microphone) pre polarized condenser microphone with Solid Microphone Standby-coloured light ring for clear visual feedback, Logical function for easy control, Phantom powering P 24 - P 48 ,Connector Logic: clip contact for logic, Pin assignment: trigger signal at the logic connector: Logic in (external LED control), GND, Logic out (switch signal)
17
44100
749700
... More
Supply, Installation & Commissioning of Speaker bulk Cable Make - Kramer & Equivalent
300
135
40500
... More
Supply, Installation & Commissioning of Audio Cable Make - Kramer & Equivalent
150
145
21750
... More
Supply, Installation & Commissioning of Microphone cables Make - Kramer & Equivalent
100
310
31000
... More
Supply, Installation & Commissioning of USB Extender Cable 15 MtrMake - Kramer & Equivalent
2
22700
45400
... More
Supply, Installation & Commissioning of High–Speed HDMI Cable. Kramer & Equivalent
-
-
-
... More
High–Speed HDMI Cable 5 Mtrs
1
4200
4200
... More
High–Speed HDMI Cable 7.5 Mtrs
10
8200
82000
... More
High–Speed HDMI Cable 10 Mtrs
1
9500
9500
... More
High–Speed HDMI Cable 15 Mtrs
10
10700
107000
... More
High–Speed HDMI Cable 20 Mtrs
1
28000
28000
... More
ROAD WORK
-
-
-
... More
Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader/ Paver on prepared surface and compacting with vibratory roller to achieve the desired density, complete as per clause 401 -- Plant Mix Method and Grading - I Material
210
2039
428190
... More
Wet Mix Macadam -- Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.Laying By Grader/Paver.
105
2045
214725
... More
Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate ( natural sand/ VSI grade finely washed crushed sand) conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, , cement content not to be less than 150 kg/ cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant/ Weigh batch mixer, transported to site with all leads and lifts, laid with a paver with electronic sensor /by suitable means as approved by Engineer-in-charge , compacting with vibratory roller, finishing, curing and including preparation of sub- grade surface if required etc. complete.
121
3659
442739
... More
Providing and applying tack coat on the prepared surface heating byfames in Boiler and spraying bitumen set footed in bitumen boller on B.T. surface 2.5 kg/10 sqm.(VG-30 bulk bitumen rates are considered to arrive at rates)
5850
18
105300
... More
DENSE BITUMINOUS MACADAM: Proving and laying dense bituminous macadam using crushed aggregates of Grading 1, premixed with bituminous binder of specified grade of Bitumen @ 4.50 per cent by weight of total mix and filler, transported to site with VTS , laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired density for 50 mm compacted thickness .USING Batch mix type hot mix plant with SCADA, Sensor Paver, Vibratory roller with Stone Dust filler.(VG-30 bulk bitumen rates are considered to arrive at rates)
175
9664
1691200
... More
BITUMINOUS CONCRETE:- Providing and laying bituminous concrete using crushed aggregates of grading 1, premixed with bituminous binder @ 5.20 per cent by weight of total mix and filler, transported to site with VTS , laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired compaction for 50 mm compacted thickness with specified grade of Bitumen,Excluding prime / tack coat. For Bitumen of specified grade -- USING Batch mix type hot mix plant with SCADA, Sensor Paver, Vibratory roller with Stone Dust filler. (VG-30 bulk bitumen rates are considered to arrive at rates)
120
10599
1271880
... More
Road Marking with Hot Applied Thermoplastic Compound with Reflectorizing Glass Beads on Bituminous Surface- Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorizing glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.complete.
145
666
96570
... More
Filling inplinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15cm to 20cm including watering and compaction etc. complete.
790
599
473210
... More
Providing and laying cement concrete pipe of IS 458:2003 NP-2 class of 450mm diameter in proper line, level and slope etc. complete.
35
1949
68215
... More
Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. columns as per detailed designs and drawing or as directed including Steel centering formwork, cover blocks laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
15
7471
112065
... More
Providing and applying two coats (exterior quality) of flat oil paint of approved colour and shade to the plastered surface in buildings and workshops including scaffolding if necessary, cleaning the surface and preparing surface etc. complete. (excluding primer coat)
580
88
51040
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements