Indian Institute Of Science Education And Research Tender

HDMI Cable 20 meter with factory moulded connectors to be integrated with the setup as per technical requirement. This including cost towards laying of cable through conduit, false ceiling running upto the AV equipment Rack. Approved Make Kramer/Extron/Belden/Lightware. Refer special condition of contarct given on page no 37 to 51 .

HDMI Cable 3 meter with factory moulded connectors to be integrated with the setup as per technical requirement. This including cost towards laying of cable through conduit, false ceiling running upto the AV equipment Rack. Approved Make Kramer/Extron/Belden/Lightware. Refer special condition of contarct given on page no 37 to 51 .

HDMI Splitter: 1 in 4 out HDMI splitter (Approved Make: Atlona / Kramer/ Aten/ Lightware/ Extron/ Crestron) with 4 K UHD video support. To be installed and integrated with the proposed system at no extra cost. Refer special condition of contarct given on page no 37 to 51 .

HDMI audio de-embedder: Approved Make: Atlona / Kramer/ Aten/ Lightware/ Extron/ Crestron with 4096 x 2160 @ 60Hz video support, built-in Advanced EDID Manager, HDCP compliant, providing analog Audio output. To be installed, rack mounted and integrated with the proposed system at no extra cost. Refer special condition of contarct given on page no 37 to 51 .

HDMI faceplate: To be supplied and wall mounted for front end connectivity (providing HDMI and an Audio input -3.5 mm stereo jack to the system) with cables and connectors required to integrate with system installed in equipment rack. The cables are to laid through wall conduits (cost included). Approved make: Kramer/ Crestron/ Lightware/ Aten/ Extron/ Crestron Refer special condition of contarct given on page no 37 to 51 .

SITC of Collar microphone Tranceiver Sets. Specifications: Battery - Replaceable batteries of AA or AAA Size ; Carrier frequency range - UHF ; Connectivity - Wireless ; On/ Off Feature Mute / un-mute feature on Wireless set - Yes ; Gain / Sensitivity control on Wireless set - Yes ; Dust and moisture protective cover for Lavelliar Microphone - Yes ; Audio Out - Balanced ; Low battery feature indicator on the Wireless set - Yes ; Belt clip for fixing the transmitter - Yes ; Audio bandwidth - 80 Hz - 16 Khz or better ; RF shielding feature to free from cell phones Interference, FM Radio/ police communication and any third-party RF sources. - Yes ; Select mix and match feature for microphones with wireless receivers installed - Yes ; LED / LCD display for showing the Mute status and frequency pairing with wireless receivers - Yes ; Warranty - 3 Year comprehensive on-site ; Mounting / Accessories - The receiver sets should be rack mountable. All the standard / mounting accessories to be included from the OEM. ; Approved Model / Make - Shure/ Senheiser/ Beyerdynamic. To be integrated with the proposed AV setup with all cables, connectors required as per site functional requirement at no extra cost. Refer special condition of contarct given on page no 37 to 51 .

SITC of Handhled microphone Tranceiver Sets. Specifications: Battery - Replaceable batteries of AA or AAA Size ; Carrier frequency range - UHF ; Connectivity - Wireless ; On/ Off Feature Mute / un-mute feature on Wireless set - Yes ; Gain / Sensitivity control on Wireless set - Yes ; Audio Out - Balanced ; Low battery feature indicator on the Wireless set - Yes ; Belt clip for fixing the transmitter - Yes ; Audio bandwidth - 80 Hz - 16 Khz or better ; RF shielding feature to free from cell phones Interference, FM Radio/ police communication and any third-party RF sources. - Yes ; Select mix and match feature for microphones with wireless receivers installed - Yes ; LED / LCD display for showing the Mute status and frequency pairing with wireless receivers - Yes ; Warranty - 3 Year comprehensive on-site ; Mounting / Accessories - The receiver sets should be rack mountable. All the standard / mounting accessories to be included from the OEM. Approved Model / Make - Shure/ Sennheiser/ Beyerdynamic. To be integrated with the proposed AV setup with all cables, connectors required as per site functional requirement at no extra cost. Refer special condition of contarct given on page no 37 to 51 .

SITC of Suitable 6 channel mixer (19” Rack Mountable) for mixing inputs from microphones (total 4), 1 Earphone Jack input from the presenter’s Laptop and one audio output from HDMI de-embedder. To be rackmounted and integrated with the proposed AV setup with all cables, connectors required as per site functional requirement at no extra cost. Approved Model Make: Artproaudio / Behringer / Biamp / MX / Ecler / Cloud USA Refer special condition of contarct given on page no 37 to 51 .

SITC of Audio amplifier : Specifications: Number of input channels / Power - 2 Channels Minimum, High Efficiency Class-D, 650 Watts (at 4 Ohm Dual) or more ; Frequency Response - 70 Hz – 16 Khz. Or better ; Signal to Noise Ratio - 95dB ; Inputs - Each Channel with XLR and 1/4 inch audio jack / A.C. Power input (180-240 V) ; Warranty - 3 Year comprehensive on-site ; Mounting Type - 19” Rack Mountable. To be rackmounted and integrated with the proposed AV setup with all cables, connectors required as per site functional requirement at no extra cost. Approved Make - Coda Audio /Adamson /L - Acoustics/ BOSE / A-T Professional/ JBL / D&B / TANNOY/ Biamp /symetrix / Lab Gruppen / YAMAHA / Crown. Refer special condition of contarct given on page no 37 to 51 .

SITC of Ceiling speakers: Specifications: Rated Maximum SPL - 92 dB SPL @ 1 m (3.3 ft) or better ; Output Frequency range - 80 Hz to 16 Khz or better ; Output Power (RMS) - 2 Way, 30 Watts or More ; Packaging - Front grilled (only white color), backcan and tile rails for fast installation ; Transformer Taps - 70V / 100V ; Nominal conical polar coverage pattern - 110 degrees or better ; Mounting Type - Ceiling mount embedded inside perforated false ceiling tiles (tile cutting included in the scope of work) with lockable feature ; Warranty - 3 Year comprehensive on-site. Fitting and installation of the ceiling speakers on false ceiling perforated sheets with prescribed safety measures like anchoring each speaker with chain to the ceiling etc. , laying the speaker cables (Minimum 14 AWG insulated cable to be provided as part of the supply) to be included Approved Make - Bose / JBL / Bosch / L-Acoustics / Yamaha / QSC / Tannoy. Refer special condition of contarct given on page no 37 to 51 .

SITC of 12 U Network Equipment Rack: Specifications :12U, 600X800, Black Colored, Powder Coated equipment rack, having at least 5 Power sockets of 16 A and MCB protection with lockable door and castor wheels (For network equipments)loaded with 4, 24 Port, 1 U, I/o Jack Panels (Total 8 Jack Panels for two racks Approved make: Digisol / Dlink / Molex / Legrand) . Scope of work to be completed with cost included: Existing 2 Nos of 24U racks (600 x 1000) needs to be decommissioned and replaced with same number of 12 U network racks (to be supplied). The decommissioned racks shall be retained by the IISER Pune (not offered in Buy-back). A total of 172 LAN cables (all running within the same room) needs to terminated into the two supplied network racks (user side faceplate termination is already done), over the 24-port network patch panel (4 each rack) with proper printed labels (at both ends) and cable tie. The Optical termination LIU – 6 Core Single mode fully loaded and operational is required to be shifted into one of the network racks (May require Optical cable splicing) as per the directions of engineer in-charge. The two network Racks shall be cross connected with 4 Runs of UTP cable (already laid). Upon completion of this rack swapping activity end to end testing of the Passive LAN cabling is to be performed (Both ends of all the cables run with the same room) and testing report should be furnished. Installation and commissioning of network switches shall not be within the scope of this supply and installation. Approved make for network Racks: Netrack / Valrack / D-Link / President / Rackom Refer special condition of contarct given on page no 37 to 51 .

SITC of 12 U Audio Visual Equipment Rack: 12U, 600X600, Black Colored, Powder Coated equipment rack, having adequate Power sockets to power all the prposed equipments with MCB protection having lockable door and castor wheels (For Audio Visual equipments). Includes installation at no extra cost.Approved make for Audio Visual Equipment Racks: Netrack / Valrack / D-Link / President / Rackom Refer special condition of contarct given on page no 37 to 51 .

SITC of Wall Mounted Green Chalk Board: Purpose - Writing ; Suitable for writing with - Chalk ; Top surface color - Green ; Mounting type - Wall mounts ; Product shall be provided with wall mounting frame / structure (may be customized as per site requirement) - Yes ; Frame (All round framing) / No sharp edges - Yes ; Writing board shall be supplied with - Two magnetic type erasers, One set of 6 piece paper holding magnets. ; Top surface material thickness - 0.5 mm to 0.6 mm ; Frame material - Anodized extruded aluminum alloy hollow section conforming to IS 733 (With latest amendment) ; Frame wall thickness - 1.2 mm ; Frame section side - 16 mm ; Core material - MDF board grade-I conforming to IS 12406 (with latest amendment) ; Core material thickness - 9 mm ; Core material bulk density - 750 kg per cubic meter ; Backing material - Electro galvanized steel plain sheet conforming to IS 277 (with latest amendment) ; Backing material thickness - 0.25 mm ; Dimension (mm x mm) - 1500 x 4500. Scope of work includes wall mounting of the supplied green chalk board over the wodden baten fixed to the wall, cutting through the grooved wooden godrej make wall acoustic panels - as per the directions of the engineer in-charge. Approved Make: Alkosign / Writemark / Godrej Interio / Princeboard Refer special condition of contarct given on page no 37 to 51 .

Required cables, connectors, consumables and standard accessories for making the site fully operational, including but not limited to those required for extending UPS power supply to all the supplied and installed equipments wherever required (as per the site requirements) to achieve the functionality as per the scheme of implementation for each facility. Refer special condition of contarct given on page no 37 to 51 .

Installation and commissioning charges to achieve the functionality of the site offerred as detailed in the Tender document. Refer special condition of contarct given on page no 37 to 51 .

Supply of the following classroom consumables: Logitech R800 Professional Presenter - Quantity - 06 Nos; Apple USB C to HDMI convertor - Quantity - 06 Nos; Green Laser Pointer Pen powered by 2 x AA batteries -included - Quantity - 06 Nos ; 3.5 mm Stereo extension audio cable (molded) – make Kramer (Male – Male)- Quantity - 10 Nos. Refer special condition of contarct given on page no 37 to 51 .

"Decommissioning of the Computer Lab: Scope of work includes: 1. Unmounting all desktops and removal of desk fitted brackets. 2. Recovering all hard disk drives and DIMM RAM modules installed within the computers and packing them in a large corrugated box. 3. Packing each removed computer after wrapping it in a bubbled plastic wraps in separate corrugated boxes labelled with the desktop part number, model number and serial number. 4. The job work is inclusive of the required packaging material. No additional payments will be made whatsoever over and above all inclusive lump-sump price quoted. 5. Relocating and stock-piling the packed items to store room (within the campus – 400 Mtr. Approximate distance) as per the directions of the IISER Pune, Engineer In-charge. (Rate is inclusive of cost of all operations, material labour, transport, all taxes, GST , etc. and nothing extra shall be payable)." Refer special condition of contarct given on page no 37 to 51 .