Indian Institute Of Science Education And Research Tender
... More
Search from over 12139+ business opportunities that have been announced from the biggest Mahatenders, e tender Maharashtra, Maharashtra government tenders, and the Online Tender Notices posted on Maharashtra e tenders till date. Find opportunities that have come in from the multiple corporations, Maharashtra government departments, State PSUs, and Private companies from the state.
Indian Institute Of Science Education And Research - IISER Tender
Metal Fabrication
Eprocure
Opening Date2 Feb 2021
Closing Date22 Feb 2021
Tender AmountRefer Documents
Costs
EMD
₹ 2,72,000Document Cost
₹ 1,180Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2021_IISRP_613122_1Bid Award Id
ViewTender No
17/IISER/PUNE/2021-22Tender Authority
Indian Institute Of Science Education And Research ViewPurchaser Address
-Website
http://eprocure.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Providing & fixing false ceiling at all height including providing & fixing of framework made of special section, power pressed from M.S. sheets and galvanised with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleat of size 25mm wide x 1.6mm thick with flanges of 27mm and 37mm, at 1200mm c/c, one flange fixed to the ceiling with dash fastener 12.5mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25 x10 x0.50mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I chanels 45 x15 x 0.90mm running at the spacing of 1200 mm c/c, to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26 mm each having lips of 10.5mm, at 450mm c/c, shall be fixed in a direction perpendicular to G.I intermediate channel with connecting clip made out of 2.64mm dia x 230mm long G.I wire at every junction, including fixing perimeter channels 0.50mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/ partitions with the help of Rawl plugs at 450mm centre, with 25mm long dry wall screws @ 230mm interval, including fixing of Calcium Silicate Board to ceiling section and perimeter channels with the help of dry wall screws of size 3.5 x25mm at 230mm c/c, including jointing & finishing to a flush finish of tapered and square edges of the board with ecommended jointing compounds, jointing tapes,finishing with jointing compounds in three layers covering up to 150mm on both sides of joints and painting with 1mm thick wall care putty and two coats of enamal primer, all as per manufacture's specification and also including the cost of making opening for light fittings, grills, diffusers, cut outs made with frame of perimeter channels suitably fixed, all complete as per drawings, specificaton and direction of the Engineer in charge but excluding the cost of painting with: 8 mm thick Calcium Silicate Board made with Calcareous & Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process. Quoted rates shall be including removal of old damaged false ceiling GST , labour, lead , lift , trasportation etc complete. Nothing extra shall be paid seperatly.
50
-
-
... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : Fixed sections of windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) .Powder coated aluminium (minimum thickness of powder coating 50 micron). Quoted rates shall be including GST , labour, lead , lift , trasportation etc complete. Nothing extra shall be paid seperatly. Approved Make JINDAL/BARUKA/Indian Aluminium Co.For fixed portion : Powder coated aluminium (minimum thickness of powder coating 50 micron).Quoted rates shall be including GST , labour, lead , lift , trasportation etc complete. Nothing extra shall be paid seperatly.
200
-
-
... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) .Powder coated aluminium (minimum thickness of powder coating 50 micron). Quoted rates shall be including GST , labour, lead , lift , trasportation etc complete. Nothing extra shall be paid seperatly. Approved Make JINDAL/BARUKA/Indian Aluminium Co : For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots/Sliding and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron) Quoted rates shall be including GST , labour, lead , lift , trasportation etc complete. Nothing extra shall be paid seperatly.
100
-
-
... More
Providing and fixing glazing in aluminium Door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge . Quoted rates shall be including GST , labour, lead , lift , trasportation etc complete. Nothing extra shall be paid seperatly. (Cost of aluminium snap beading shall be paid in basic item): With toughen glass panes of 8 mm thickness.Quoted rates shall be including GST , labour, lead , lift , trasportation etc complete. Nothing extra shall be paid seperatly.
125
-
-
... More
Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. With stainless steel cover plate minimum 1.25 mm thickness. Quoted rates shall be including GST , labour, lead , lift , trasportation etc complete. Nothing extra shall be paid seperatly.Approved Makes Godrej/Dorma/Hafle/hettich
18
-
-
... More
Providing and fixing 100mm brass locks (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.Quoted rates shall be including GST , labour, lead , lift , trasportation etc complete. Nothing extra shall be paid seperatly. Approved Makes Godrej/Dorma/Hafle/hettich
18
-
-
... More
Providing and fixing Stainless Steel H handle of 300mm size etc. complete pair of in-out handle as per direction of Engineer-incharge. Quoted rates shall be including GST , labour, lead , lift , trasportation etc complete. Nothing extra shall be paid seperatly. Approved Makes Godrej/Hafle/hettich
18
-
-
... More
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 150x10 mm.
5
-
-
... More
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : Old work (one or more coats) Ceiling Painting.Quoted rate shall be including at taxes , duties , royalties , lead, lift , trasportation , insurance , GST , etc. Nothing extra shall be paid seperatly. Approved Makes Nerolac/Dulux/Asian.
150
-
-
... More
Removing white or colour wash/any wall paint by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete including disposal of scrapped material, cleaning of flooring etc complete.Quoted rate shall be including at taxes , duties , royalties , lead, lift , trasportation , insurance , GST , cost of etc. Nothing extra shall be paid seperatly.
250
-
-
... More
Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.Quoted rate shall be including at taxes , duties , royalties , lead, lift , trasportation , insurance , GST , etc. Nothing extra shall be paid seperatly. Approved Makes Nerolac/Dulux/Asian.
650
-
-
... More
Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content.With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre.Minimum 2 coats .Quoted rate shall be including at taxes , duties , royalties , lead, lift , trasportation , insurance , GST ,etc. Nothing extra shall be paid seperatly. Approved Makes Nerolac/Dulux/Asian.
650
-
-
... More
Wall painting with synthetic enamel paint of satin finish approved brand to give an even shade: One or more coats on old work upto even shade. Quoted rate shall be including at taxes , duties , royalties , lead, lift , trasportation , insurance , GST , cost of sample and laboratory fees etc. Nothing extra shall be paid seperatly. Shade and scheme shall be got approved from Engineer In-charge before taking-up work. Application methodology as specifified by Manufactorer. Approved Makes Nerolac/Dulux/Asian.
650
-
-
... More
Painting with synthetic enamel paint of satin finish approved brand and manufacture to give an even shade : Two or more coats on new work. Quoted rate shall be including at taxes , duties , royalties , lead, lift , trasportation , insurance , GST , etc. Nothing extra shall be paid seperatly. Shade and scheme shall be got approved from Engineer In-charge before taking-up work. Application methodology as specifified by Manufactorer. Approved Makes Nerolac/Dulux/Asian.
650
-
-
... More
Removal and refixing of modular false ceiling of size 595X595 along with grid system and stacking grid and tiles polypacks in suitable boxes at location in IISER PUNE campus as directed by Engineer in charge. Rate shall be inclusive of scaffolding etc. complete . Nothing extra shall be paid separately.
350
-
-
... More
Providing and fixing grid for modular false ceiling of size 595X595 along with grid system , quoted rate shall be including removal of existing damaged/bent unservisable grid. Repaired area of ceiling will be paid for payments.
50
-
-
... More
Providing and laying modular false ceiling tile of size 595X595 , quoted rate shall be including removal of existing damaged/bent unservisable tle, disposal to dumping ground within campus.
50
-
-
... More
Repairs to Gypsum/Calcium Silicate Partition/ceiling by providing and fixing 8mm calcium silicate board single/double skin on existing G.I. frame/ceiling including jointing and finishing flush to existing finish with recommended jointing compound, jointing tape, angle beads at corners (25 mm x 25 mm x 0.5 mm), joint finisher and two coats of primer , putty and 2 coat painting suitable for board as per manufacture's specification and direction of engineer in charge all complete. Calcium Silicate Board made with Calcareous & Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process with Compressive Strength 225 kg/sq.cm, Bending Strength 100 kg./ sq.cm . Quoted rate shall be including removing of existing damaged ceiling , making proper supporting arrangement , scaffolding upto 5 meter etc complete. Actual area of board shall be measured for payment.
50
-
-
... More
Providing and fixing wall paneling by 8mm tapered edge calcium silicate board made with calcareous & siliceous materials reinforced with cellulose fiber manufactured through autoclaving process to give stable crystalline structure with compressive strength 225 kg/ sq.cm, Bending strength 100 kg/sq.cm over frame work of aluminium /GI/MS etc all complete as per the drawing & directions of engineer-in-charge, the joints of the boards are finished with specially formulated jointing compound and 48 mm wide jointing tape to provide seamless finish.Frame works shall be measured in respective items. Quoted rate shall be including removing of existing damaged ceiling , making proper supporting arrangement , scaffolding upto 5 meter etc complete. Actual area of board shall be measured for payment.
200
-
-
... More
Misc plumbing works associated with closing of existing water points , drain points , closing by using vitrified tile cut to appropriate size and shape etc complete. ( including CPVC Tee-elbow-end cap)
50
-
-
... More
Fixing aluminium work for supports, backing, above ceiling , in partitions with extruded built up standard tubular sections/ appropriate with fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sideswith silicon sealant. Aluminium sections shall be issued departmentelly at stores within Campus.Quoted rates shall be including GST , labour, lead , lift , trasportation etc complete. Nothing extra shall be paid seperatly.
100
-
-
... More
Providing and fixing plain lining with necessary screws/nuts & bolts/ nails, including a coat of approved primer on one face, and fixed on wooden /steel frame work, complete as per direction of Engineer-incharge (Frame work shall be paid for separately). 9.140.1 12mm thick ply conforming to IS : 1328 BWR type Approved Make Marino/Kitply/Century
50
-
-
... More
Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality and making grooves of 5mm as per approved desing and pattern. grooves shall be cleaned and polished with french polish to neat seamless finish. For Lamonate of 1.0 mm thickness Approved Make Marino/Kitply/Century
50
-
-
... More
Fixing glazing in aluminium Door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge . Quoted rates shall be including GST , labour, lead , lift , trasportation etc complete. Nothing extra shall be paid seperatly. (Cost of aluminium snap beading shall be paid in basic item): With glass issued departmentelly at one location in campus , quoted rate shall be including safe lead,lead and installtion of glass of any thickness or size in door and windows.Quoted rates shall be including GST , labour, lead , lift , trasportation etc complete. Nothing extra shall be paid seperatly.
100
-
-
... More
Providing and fixing aluminium composite panel in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3.5mm thick FR grade mineral core sandwiched between wo Aluminium sheets (each 0.25mm thick). The aluminium composite panel sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade using tainless steel screws, nuts, bolts, washers, cleats,weather silicone sealant, backer rods etc.
20
-
-
... More
Sealing of holes by exterior grade silicon sealant of dow corning for structural glazing purpose with good adesion between metal and frp/glass/acp. dow 895 / dow 995 with application nozzle-gun push mechanism. bottle of 300mm
25
-
-
... More
Supply and installation of Self adhesive aluminium foil bitumen waterproof membrane of 1.5mm thick multilayer bitumen membrane waterproofing over pre-coated sheet at IISER Pune. Bitumen membrane shall have first layer of high resign adhesive designed for pre-coated sheet roofing , second layer of asphalt and third layer of aluminum foil. Sheet shall have roll form , with one side protected with polyethane cover for adhesion. Provision of active joint of 50mm with adhesive shall be built in to the sheet throughout the length. Work shall be executed as per below listed method and OEM’s standard installation instructions, 1. Cleaning of Pre-coated sheet to make it free from dirt and dust. 2. Bitumen sheet roll of appropriate side and paste on the pre-coated sheet as per profile of sheets. 3. First round : Application of sheet on roofing sheet ensuring appropriate overlap of minimum 100mm at horizontal and vertical joints.4. Pressing of sheet by rubberized roller or rammer properly on the roofing sheet such that bitumen membrane shall follow sheet profile.5. Final pressing of sheet, rounding of corners. 6. Second Round : Shall be within a week after application of rolling sheet on sunny day to ensure perfect adhesion of sheet with roofing.7. Special care shall be taken at rounded area’s , at bases wind fans etc. Quoted rate shall be including cost of lead , lift , transportation , working at ladder connected heights , GST , transportation , taxes , duties , wastage etc complete. Nothing extra shall be paid separately. Actual surface area waterproofing done at site shall be measured for payments. In case of profile roofing sheets actual area of application including slanting sides of pitches shall be measured for payments. Bidder to furnish Bond guarantee as per CPWD format for the area of work measured. Approved Makes : 'Sikha or Peel and Seal'
50
-
-
... More
Removal and refixing of existing glazing , removing of existing glazing , removing of glass panels , removing of aluminium sections , removal and refixing of glass partition as per revised layout without damaging to glass etc complete. Nothing extra shall be paid seperatly.
50
-
-
... More
Providing and fixing chlorinated Polyvinyl chloride (CPVC) pipes having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fitting including fixing the pipe with clamps at 1.00m spacing. this includes jointing of pipes &fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in charge with two CPVC valves at source tapping point and second at discharge point. 25 mm nominal outer dia .pipes. Actual lenght of pipe laid at site including cost of bends , tees, reducer tee , MTA , FTA , brass fittings , teflon tape , end cap , sealant , wall brackets , nails etc complete. Nothign extra shall be paid seperatly.
50
-
-
... More
Providing, fixing and testing 75mm HDPE B Class pipe of approved Make confirming to IS 13592-1992. and fittings confirming to IS 14735-1999, such as coupler, elbow, bends, Tee, Y, vent cowl etc for laboratory waste , Soil, Waste,vent and rain water pipe works in shaft and suspended in ceiling., laid in ground ( from shaft to Inspection chamber and Gully chamber), etc., hot mirror plate welding joitns , for all lines and solvent cement joints for suspended lines and work in below ground. Woks includes necessary scaffolding,cutting and making good the walls wherever required all complete as directed by the Engineer-in-Charge.
50
-
-
... More
Providing, fixing and testing of gully trap in HDPE B Class pipe of approved Make confirming to IS 13592-1992. and fittings confirming to IS 14735-1999, such as coupler, elbow, bends, Tee, Y, vent cowl etc for laboratory waste , Soil, Waste,vent and rain water pipe works in shaft and suspended in ceiling., laid in ground ( from shaft to Inspection chamber and Gully chamber), etc., hot mirror plate welding joitns , for all lines and solvent cement joints for suspended lines and work in below ground. Woks includes necessary scaffolding,cutting and making good the walls wherever required all complete as directed by the Engineer-in-Charge.
2
-
-
... More
Providing wood work in frames of doors, windows, clerestory windows , wooden paneling backing in 25mm X25mm , in windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately).Sal wood including pink primer
0.5
-
-
... More
REPLACEMENT OF GYPSUM CEILING
-
-
-
... More
Providing & fixing false ceiling at all height including providing & fixing of framework made of special section, power pressed from M.S. sheets and galvanised with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleat of size 25mm wide x 1.6mm thick with flanges of 27mm and 37mm, at 1200mm c/c, one flange fixed to the ceiling with dash fastener 12.5mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25 x10 x0.50mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I chanels 45 x15 x 0.90mm running at the spacing of 1200 mm c/c, to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26 mm each having lips of 10.5mm, at 450mm c/c, shall be fixed in a direction perpendicular to G.I intermediate channel with connecting clip made out of 2.64mm dia x 230mm long G.I wire at every junction, including fixing perimeter channels 0.50mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/ partitions with the help of Rawl plugs at 450mm centre, with 25mm long dry wall screws @ 230mm interval, including fixing of Calcium Silicate Board to ceiling section and perimeter channels with the help of dry wall screws of size 3.5 x25mm at 230mm c/c, including jointing & finishing to a flush finish of tapered and square edges of the board with ecommended jointing compounds, jointing tapes,finishing with jointing compounds in three layers covering up to 150mm on both sides of joints and two coats of primer suitable for boards, all as per manufacture's specification and also including the cost of making opening for light fittings, grills, diffusers, cut outs made with frame of perimeter channels suitably fixed, all complete as per drawings, specificaton and direction of the Engineer in charge but excluding the cost of painting with: 8 mm thick Calcium Silicate Board made with Calcareous & Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process. Quoted rates shall be including removal of old damaged false ceiling GST , labour, lead , lift , trasportation etc complete. Nothing extra shall be paid seperatly.
75
-
-
... More
Providing and fixing Calcium silicate false ceiling at all height including on existing GI framework with screws . Ceiling to be fixed to wall/ partitions with the help of Rawl plugs at 450mm centre, with 25mm long dry wall screws @ 230mm interval, including fixing of Calcium Silicate Board to ceiling section and perimeter channels with the help of dry wall screws of size 3.5 x25mm at 230mm c/c, including jointing & finishing to a flush finish of tapered and square edges of the board with ecommended jointing compounds, jointing tapes,finishing with jointing compounds in three layers covering up to 150mm on both sides of joints and two coats of primer suitable for boards, all as per manufacture's specification and also including the cost of making opening for light fittings, grills, diffusers, cut outs made with frame of perimeter channels suitably fixed, all complete as per drawings, specificaton and direction of the Engineer in charge but excluding the cost of painting with: 8 mm thick Calcium Silicate Board made with Calcareous & Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process. Quoted rates shall be including removal of existing unservisable gypsum false ceiling , collection of debries and dumping within campus by manul or mechanical means. Quoted rate shall be including GST , labour, lead , lift , trasportation etc complete. Addition supporting shall be done for stable ceiling in aluminium section and shall be measured seperatly. Nothing extra shall be paid seperatly. ( On existing GI frame work by removing old gypsum boards )
800
-
-
... More
Providing and fixing aluminium work for support of false ceiling in extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. : For Supports of ceiling above roofing . Bare aluminium section of approved size and thickness . Quoted rates shall be including GST , labour, lead , lift , trasportation etc complete. Nothing extra shall be paid seperatly. Approved Make JINDAL/BARUKA/Indian Aluminium Co. Quoted rates shall be including GST , labour, lead , lift , trasportation etc complete. Nothing extra shall be paid seperatly.
300
-
-
... More
Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall/ceiling surface to prepare the surface even and smooth complete.Quoted rate shall be including at taxes , duties , royalties , lead, lift , trasportation , insurance , GST , etc. Nothing extra shall be paid seperatly. Approved Makes Nerolac/Dulux/Asian.
800
-
-
... More
Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content.With oil thinnable primer on ceiling surface having VOC content less than 50 grams/litre.Minimum 2 coats .Quoted rate shall be including at taxes , duties , royalties , lead, lift , trasportation , insurance , GST ,etc. Nothing extra shall be paid seperatly. Approved Makes Nerolac/Dulux/Asian.
950
-
-
... More
Painting of ceiling with synthetic enamel paint of satin finish approved brand and manufacture to give an even shade : Two or more coats on new work. Quoted rate shall be including at taxes , duties , royalties , lead, lift , trasportation , insurance , GST , etc. Nothing extra shall be paid seperatly. Shade and scheme shall be got approved from Engineer In-charge before taking-up work. Application methodology as specifified by Manufactorer. Approved Makes Nerolac/Dulux/Asian.
950
-
-
... More
Removal , checking , inspection and refixing of modular false ceiling system of size 595X595 along with grid system. All ceiling grid system and tiles shall be removed , inspected for intactness , proper support at every 1200mm , checking of all supports , screws , suspender , leveller , GI wire etc complete and refixing of grid system with all existing angle-tee structure. Any angle-tee, perimeter channel , 2' tee , 4'tee bent or damaged during removal shall be replaced with same size shape , make and colour . All ceiling tiles shall be stacked carefully and re-installed and laid simultaneoulsy. Ceiling tiles found damaged before removal or idetified after removal shall be replaced and measured seperatly. Rate shall be inclusive of scaffolding etc. complete . Nothing extra shall be paid separately.
2000
-
-
... More
Providing and fixing grid for modular false ceiling of size 595X595 along with grid system , quoted rate shall be including removal of existing damaged/bent unservisable grid.
60
-
-
... More
Providing of modular false ceiling tile of size 595X595 of Armostrong Bioguard.
100
-
-
... More
Repairs to Gypsum/Calcium Silicate Partition/ceiling by providing and fixing 8mm calcium silicate board single/double skin on existing G.I. frame/ceiling including jointing and finishing flush to existing finish with recommended jointing compound, jointing tape, angle beads at corners (25 mm x 25 mm x 0.5 mm), joint finisher and two coats of primer , putty and 2 coat painting suitable for board as per manufacture's specification and direction of engineer in charge all complete. 8mm Calcium Silicate Board made with Calcareous & Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process with Compressive Strength 225 kg/sq.cm, Bending Strength 100 kg./ sq.cm . Quoted rate shall be including removing of existing damaged ceiling , making proper supporting arrangement , scaffolding upto 5 meter etc complete. Actual area of board shall be measured for payment.
100
-
-
... More
Providing and fixing wall paneling by 8mm tapered edge calcium silicate board made with calcareous & siliceous materials reinforced with cellulose fiber manufactured through autoclaving process to give stable crystalline structure with compressive strength 225 kg/ sq.cm, Bending strength 100 kg/sq.cm over frame work of aluminium /GI/MS etc all complete as per the drawing & directions of engineer-in-charge, the joints of the boards are finished with specially formulated jointing compound and 48 mm wide jointing tape to provide seamless finish.Frame works shall be measured in respective items. Quoted rate shall be including removing of existing damaged ceiling , making proper supporting arrangement , scaffolding upto 5 meter etc complete. Actual area of board shall be measured for payment.
50
-
-
... More
ELECTRICAL WORKS
-
-
-
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 15/16 A switch
32
-
-
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 16 A socket
20
-
-
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 6 A switch
80
-
-
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 6 A socket
102
-
-
... More
Supply, Installation, Testing & Commissioning of single UTP CAT6 I/O of specified make with different colours for differentiating Data, Voice & Wifi and other services inclusive of termination of UTP CAT6 cable at each I/O as required as per drawing. The IO shall be mounted inside singlex or duplex or quad faceplate as applicable and using suitable backbox assembly. It shall be as per technical specifications with all the necessary mounting accessories as required for complete installation.
30
-
-
... More
Supplying and fixing following Modular base & cover plate ( Clip on support for mounting switches etc) on existing DLP U PVC trunking etc. as required. 4 module 85 mm
130
-
-
... More
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
100
-
-
... More
Supplying and fixing 32 A, 415 V, TPN Industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 30 A "C" curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet and complete with connections, testing and commissioning etc. as required.
5
-
-
... More
Supplying and fixing 63 A, 415 V, TPN Industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 30 A "C" curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet and complete with connections, testing and commissioning etc. as required.
1
-
-
... More
Supply & installation of surface mounted DLP U- PVC adaptable trunking raceways, fabricated out of U-PVC to Off-White or approved shade as per IS 733 of thickness 2.0mm for the base and sides with removable covers, complete with necessary bends, suitable sized junction boxes, internal angle, external angle, flat 90 degree angle , end caps , seperators and tees etc, Complete. (For every 1mtr distance cable tag has to be provided for each circuit in the raceways - as more that 1C FRLS copper wire is required for 1 Circuit) PVC RACEWAYS ( Along the wall), DLP U- PVC adaptable trunking . Size: 105x 50mm PVC Raceways for Power & Data with above specifications
200
-
-
... More
Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) 4 way (4 + 12), Double door
4
-
-
... More
Supplying and fixing following way, single pole and neutral,
sheet steel, MCB distribution board, 240 V, on surface/ recess,
complete with tinned copper bus bar, neutral bus bar, earth
bar, din bar, interconnections, powder painted including
earthing etc. as required. (But without MCB/RCCB/Isolator) 8 way , Double door
2
-
-
... More
Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.
30
-
-
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 4 sq. mm + 1 X 4 sq. mm earth wire ( UPS )
350
-
-
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 4 sq. mm + 1 X 4 sq. mm earth wire ( RAW )
100
-
-
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 4 X 4 sq. mm + 2 X 4 sq. mm earth wire
30
-
-
... More
Supply of direct optical design LED 600x600mm fitting made of CRCA powder quoted finish delivering soft and uniform light for visual comfort and a minimum system lumen output of 3000 lumens and maximum system wattage of 36W, LED Used shall be SMD type and fixture should have minimum efficacy at System level (Not Chip Level) =100lumens/watt, Life of fixture 50000hrs@L70% Lumen maintenance, CCT up to 6500, CRI 80, PF 0.95 and SDCM 4 for good light quality, an operating Voltage Range of 140 - 270 V.Minimum Internal Surge Protection 2.5KV The fixture should comply with the parameters as per IS10322. The LED driver should comply to IEC61000-3-2 ed.3.2, 2009 for Harmonics, IEC61347 -2 -13, 2006 in Conjunction with IEC61347-1 ed.2.0, 2007 for Electrical Safety, IEC62384 ed.1.1, 2011 for performance and IEC61547 ed.2.0, 2009, CISPR-15 for EMI. Manufacturer shall have inhouse lab approved by NABL or ministry of science of govt of India. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters. Make Wipro / Syska / Philips/crompton/havells
60
-
-
... More
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated
copper conductor single core cable etc. as required. Group C
60
-
-
... More
Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 250 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) Suitable for MCCB incomer of upto 160 A 4 P rating , having following specifications : As per IEC 61439-3,
• With 250 A Copper Busbar for each phase, • With 2 Neutral bar, 2 Earthbar and Cable ties for Cable management, • Fully insulated busbar & shrouded Neutral bars, • Improved Pan assembly for ease of installation, • Prefitted masking sheet, • Reversible Door for IP 43 & IP 54 DB's, • With provision for DPX³ 160 MCCB as incomer and, SP/TP MCB's as outgoing . ( 8 way DPX³ 160+24 ) VTPN DB includes Incomer MCCB, 100 A, 4 pole, 36 kA, Ics=Icu, suitable for isolation, Thermal magnetic protection, Thermal adjustable setting, SC& EF protection , installation with required hardware, spreaders and connectors. = Qty 1 no. Outgoing MCBs 32 A TP C curve = QTY 8 nos.
1
-
-
... More
Supply of Following size of PVC insulated and PVC sheathed power cable of 1.1 KV grade. 4 C x 6 sq.mm Cu. Conductor multistand armoured cable, quoted rates shall be including all taxes,duties,royalties,lead,lift,transpotation,GST etc complete.Nothing shall be payable separtely. Work shall be executed as per direction of engineer in charge,IISER Pune. Actual cable laid at site shall be measured for payments.
150
-
-
... More
Supply of Following size of PVC insulated and PVC sheathed power cable of 1.1 KV grade. 4 C x 10 sq.mm Cu. Conductor multistand armoured cable, quoted rates shall be including all taxes,duties,royalties,lead,lift,transpotation,GST etc complete.Nothing shall be payable separtely. Work shall be executed as per direction of engineer in charge,IISER Pune. Actual cable laid at site shall be measured for payments.
110
-
-
... More
Supply of Following size of PVC insulated and PVC sheathed power cable of 1.1 KV grade. 4 C x 4 sq.mm Cu. Conductor multistand armoured cable, quoted rates shall be including all taxes,duties,royalties,lead,lift,transpotation,GST etc complete.Nothing shall be payable separtely. Work shall be executed as per direction of engineer in charge,IISER Pune. Actual cable laid at site shall be measured for payments.
40
-
-
... More
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole
35
-
-
... More
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Double pole
7
-
-
... More
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Triple pole
7
-
-
... More
Supply, installation, testing and commissioning of MCCB, 100 A, 4 pole, 36 kA, Ics=Icu, suitable for isolation, Thermal magnetic protection, Thermal adjustable setting, SC& EF protection , installation with required hardware, spreaders and connectors. Installation will be done in existing panel or feeder with required accessories as complete.
1
-
-
... More
Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
3
-
-
... More
Supply of Following size of PVC insulated and PVC sheathed power cable of 1.1 KV grade. 1 C x 70 sq.mm Cu. Conductor multistand flexible cable, quoted rates shall be including all taxes,duties,royalties,lead,lift,transpotation,GST etc complete.Nothing shall be payable separtely. Work shall be executed as per direction of engineer in charge,IISER Pune. Actual cable laid at site shall be measured for payments.
240
-
-
... More
Supply and laying of one number PVC insulated PVC sheated /XLPE power cable of 1.1 KV grade. 1 C x 10 sq.mm Cu. Conductor multistand flexible cable in the existing open duct/cable tray / surface / in existing conduit as requied :- Upto 35 Sq mm, quoted rates shall be including all taxes,duties,royalties,lead,lift,transpotation,GST etc complete.Nothing shall be payable separtely. Work shall be executed as per direction of engineer in charge,IISER Pune. Actual cable laid at site shall be measured for payments.
100
-
-
... More
Supply and laying of one number PVC insulated PVC sheated /XLPE power cable of 1.1 KV grade. 1 C x 06 sq.mm Cu. Conductor multistand flexible cable in the existing open duct/cable tray / surface / in existing conduit as requied :- Upto 35 Sq mm, quoted rates shall be including all taxes,duties,royalties,lead,lift,transpotation,GST etc complete.Nothing shall be payable separtely. Work shall be executed as per direction of engineer in charge,IISER Pune. Actual cable laid at site shall be measured for payments.
50
-
-
... More
Supply of Following size of PVC insulated and PVC sheathed power cable of 1.1 KV grade.3 1/2 C x 50 sq mm Al. Conductor armoured cablequoted rates shall be including all taxes,duties,royalties,lead,lift,transpotation,GST etc complete.Nothing shall be payable separtely. Work shall be executed as per direction of engineer in charge,IISER Pune. Actual cable laid at site shall be measured for payments.
150
-
-
... More
Laying of one number PVC insulated PVC sheated /XLPE power cable of 1.1 kv grade of following in the existing open duct/cable tray/ on surface / in existing PVC conduit as requied :- Copper flex 50 sqmm x 1 core cable, Quoted rates shall be including all taxes,duties,royalties,lead,lift,transpotation,GST etc complete.Nothing shall be payable separtely. Work shall be executed as per direction of engineer in charge,IISER Pune. Actual cable laid at site shall be measured for payments.
150
-
-
... More
Laying of one number PVC insulated PVC sheated /XLPE power cable of 1.1 kv grade of following in the existing open duct/cable tray/ on surface / in existing PVC conduit as requied :- Copper flex 70 sqmm x 1 core cable, Quoted rates shall be including all taxes,duties,royalties,lead,lift,transpotation,GST etc complete.Nothing shall be payable separtely. Work shall be executed as per direction of engineer in charge,IISER Pune. Actual cable laid at site shall be measured for payments.
240
-
-
... More
Laying of one number PVC insulated PVC sheated /XLPE power cable of 1.1 kv grade of following in the existing open duct/cable tray/ on surface / in existing PVC conduit as requied :- Copper flex 35 sqmm x 1 core cable, Quoted rates shall be including all taxes,duties,royalties,lead,lift,transpotation,GST etc complete.Nothing shall be payable separtely. Work shall be executed as per direction of engineer in charge,IISER Pune. Actual cable laid at site shall be measured for payments.
220
-
-
... More
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 3½ X 50 sq. mm (35mm)
2
-
-
... More
Supplying and making end termination with PVC gland and copper lugs for following size of PVC insulated and PVC sheathed / XLPE copper conductor cable of 1.1 kV grade as required. ( 70 sqmm cu flex )
6
-
-
... More
Supplying and making end termination with brass compression gland and copper lugs for following size of PVC insulated and PVC sheathed / XLPE copper conductor cable of 1.1 KV grade as required. 1 x 10 sq. mm
8
-
-
... More
Supplying and making end termination with brass compression gland and copper lugs for following size of PVC insulated and PVC sheathed / XLPE copper conductor cable of 1.1 KV grade as required. 1 x 6 sq. mm
4
-
-
... More
Supplying and making end termination with PVC gland and copper lugs for following size of PVC insulated and PVC sheathed / XLPE copper conductor cable of 1.1 kV grade as required. ( 10 sqmm cu flex )
7
-
-
... More
Supplying and making end termination with PVC gland and copper lugs for following size of PVC insulated and PVC sheathed / XLPE copper conductor cable of 1.1 kV grade as required. ( 06 sqmm cu flex )
4
-
-
... More
Disconnection, shifting, loading , unloading and reinstallation of 30 KVA UPS with its battery back and accessories in same building. Scope of work includes 1)supply of new rack which is suitable for exiting battery bank and space available. 2) Avaibility of UPS authorised service provider & any charges payable to agency will be borne by bidder, 3) work shall be consider as completed after successful testing of UPS with LOAD condition, 4) Any spares required during shifting and commissioning of UPS will be scope of agency to make it fuctional in normal mode. 4) work should be carried out as per safery norms and IE rules.
1
-
-
... More
Excavation for Earthing pit in soft soil & hard rock including dressing of sides and ramming of bottoms, lift upto 3 m including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 metres.
36
-
-
... More
Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required. 1 run of cable
300
-
-
... More
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 25 mm
500
-
-
... More
HVAC WORKS
-
-
-
... More
Outdoor Units (Make:- Toshiba/Daikin/Mitsubishi ) Supply installation testing and commissioning of Air Cooled Top Discharge Variable Refrigerant Flow Modular or Single Outdoor Unit. The Outdoor Unit should have 100% inverter multiple compressors. The outdoor unit must have with necessary accessories for oil separation and should operate with equal runtime for all Compressor/Inverter or On/Off type. Air Cooled condenser coils and fins must have standard anticorrosive treatment. Outdoor Unit should have Refrigerant circuit, Oil Balancing / Equalizing circuit, High Pressure Switch, Condenser Fan motor over load Protector, Over current relay, Inverter over load Protector, Electronic expansion valve, the units should have ELCB arrangements & etc The refrigerant should be CFC Free R 410a only.The outdoor unit discharge air line should be covered with G.I ducting as per direction of Engineer Incharge. and the outdoor panel must be 100% compatible with BMS. The unit/s must also be provided with self addressable control system for control of indoor & other outdoor machines. The quoted rates shall be inclusive of all taxes and levis, duties, lead, lift,transpotation, placing, scaffolding, core cutting of required diameter in walls, finishing and minor civil works and nothing shall be paid separately.18 HP Full Inverter Top Discharge
1
-
-
... More
Supply, installtion, testing and commissiong of 4 way 2.0 TR cassette type with inverter compressor with min 4 star rating of any green gas air condition Unit comprising of Air filter, Two/Three level fan Speed motor, DX - cooling coil, Drain pan, Inbuilt Pump, Washable Grill, Auto - swing Louvers,and outdor unit should be mounted on the suitable stand. The machine cost should include cost for cordless remote for controlling the temperature and ON/OFF siwtch and panel.The quoted rates shall be inclusive of all taxes and levis, duties, lead, lift,transpotation, placing, scaffolding, core cutting of required diameter in walls, finishing and minor civil works and nothing shall be paid separately.(Make : Toshiba /Mistubishi / Daikin/Carrier).
2
-
-
... More
Indoor Units Supply installation testing and commissioning of 4 way Cassette Unit comprising of Air filter, Two/Three level fan Speed motor, DX - cooling coil, Drain pan, Inbuilt Pump, Washable Grill, Auto - swing Louvers, . The machine cost should include cost for cordless remote for controlling the temperature and ON/OFF siwtch and panel.The quoted rates shall be inclusive of all taxes and levis, duties, lead, lift,transpotation, placing, scaffolding, core cutting of required diameter in walls, finishing and minor civil works and nothing shall be paid separately. 2.5 TR
3
-
-
... More
Indoor Units Supply installation testing and commissioning of 4 way Cassette Unit comprising of Air filter, Two/Three level fan Speed motor, DX - cooling coil, Drain pan, Inbuilt Pump, Washable Grill, Auto - swing Louvers, . The machine cost should include cost for cordless remote for controlling the temperature and ON/OFF siwtch and panel.The quoted rates shall be inclusive of all taxes and levis, duties, lead, lift,transpotation, placing, scaffolding, core cutting of required diameter in walls, finishing and minor civil works and nothing shall be paid separately. 2.0 TR
4
-
-
... More
Supply installation testing and commissioning of Indoor Refrigerant Y-Joints with insulation of suitable sizes.The quoted rates shall be inclusive of all taxes and levis, duties, lead, lift,transpotation, placing, scaffolding, core cutting of required diameter in walls, finishing and minor civil works and nothing shall be paid separately.
6
-
-
... More
Refrigerant piping Supply, installation, testing and commissioning of refrigerant Suction & liquid piping using eddy current free Copper pipes and fittings like elbows, couplers, tee joints, brass fittings, "U" loops, expansion loops etc. Supports consisting of GI box / "C" sections & female anchor fasteners with full threaded GI rods, insulation of pipes using 13 mm thick elastomeric closed cell Nitrile Rubber insulation material having class "O" for fire properties, structural clamps with hard PVC pipe sleeves under the clamps to protect insulation at supports, tagging to enable tracing connectivity to respective units as per shop drawings to be generated by contractor and approved by consultant. Submission of test reports in approved format forms a part of this item scope. Making up of any leakages occuring during testing / commissioning / first calender year from handing over, including supply, labour, consumables, refrigerant, top up, oil top up and incidental expenses also forms a part of the scope covered under this item.28.6 Ø mm-semi hard pipe (1.00 mm thick) with 19 mm thick insulation
30
-
-
... More
Refrigerant piping Supply, installation, testing and commissioning of refrigerant Suction & liquid piping using eddy current free Copper pipes and fittings like elbows, couplers, tee joints, brass fittings, "U" loops, expansion loops etc. Supports consisting of GI box / "C" sections & female anchor fasteners with full threaded GI rods, insulation of pipes using 13 mm thick elastomeric closed cell Nitrile Rubber insulation material having class "O" for fire properties, structural clamps with hard PVC pipe sleeves under the clamps to protect insulation at supports, tagging to enable tracing connectivity to respective units as per shop drawings to be generated by contractor and approved by consultant. Submission of test reports in approved format forms a part of this item scope. Making up of any leakages occuring during testing / commissioning / first calender year from handing over, including supply, labour, consumables, refrigerant, top up, oil top up and incidental expenses also forms a part of the scope covered under this item.22.2 Ø mm-semi hard pipe (0.80 mm thick) with 13 mm thick insulation
25
-
-
... More
Refrigerant piping Supply, installation, testing and commissioning of refrigerant Suction & liquid piping using eddy current free Copper pipes and fittings like elbows, couplers, tee joints, brass fittings, "U" loops, expansion loops etc. Supports consisting of GI box / "C" sections & female anchor fasteners with full threaded GI rods, insulation of pipes using 13 mm thick elastomeric closed cell Nitrile Rubber insulation material having class "O" for fire properties, structural clamps with hard PVC pipe sleeves under the clamps to protect insulation at supports, tagging to enable tracing connectivity to respective units as per shop drawings to be generated by contractor and approved by consultant. Submission of test reports in approved format forms a part of this item scope. Making up of any leakages occuring during testing / commissioning / first calender year from handing over, including supply, labour, consumables, refrigerant, top up, oil top up and incidental expenses also forms a part of the scope covered under this item. 15.9 Ø mm-soft pipe (0.80 mm thick) with 13 mm thick insulation
95
-
-
... More
Refrigerant piping Supply, installation, testing and commissioning of refrigerant Suction & liquid piping using eddy current free Copper pipes and fittings like elbows, couplers, tee joints, brass fittings, "U" loops, expansion loops etc. Supports consisting of GI box / "C" sections & female anchor fasteners with full threaded GI rods, insulation of pipes using 13 mm thick elastomeric closed cell Nitrile Rubber insulation material having class "O" for fire properties, structural clamps with hard PVC pipe sleeves under the clamps to protect insulation at supports, tagging to enable tracing connectivity to respective units as per shop drawings to be generated by contractor and approved by consultant. Submission of test reports in approved format forms a part of this item scope. Making up of any leakages occuring during testing / commissioning / first calender year from handing over, including supply, labour, consumables, refrigerant, top up, oil top up and incidental expenses also forms a part of the scope covered under this item. 12.7 Ø mm-soft pipe (0.80 mm thick) with 13 mm thick insulation
30
-
-
... More
Refrigerant piping Supply, installation, testing and commissioning of refrigerant Suction & liquid piping using eddy current free Copper pipes and fittings like elbows, couplers, tee joints, brass fittings, "U" loops, expansion loops etc. Supports consisting of GI box / "C" sections & female anchor fasteners with full threaded GI rods, insulation of pipes using 13 mm thick elastomeric closed cell Nitrile Rubber insulation material having class "O" for fire properties, structural clamps with hard PVC pipe sleeves under the clamps to protect insulation at supports, tagging to enable tracing connectivity to respective units as per shop drawings to be generated by contractor and approved by consultant. Submission of test reports in approved format forms a part of this item scope. Making up of any leakages occuring during testing / commissioning / first calender year from handing over, including supply, labour, consumables, refrigerant, top up, oil top up and incidental expenses also forms a part of the scope covered under this item. 9.52 Ø mm-soft pipe (0.80 mm thick) with 13 mm thick insulation
50
-
-
... More
Supply installation testing and commissioning of corded remote controllers for cassette units
7
-
-
... More
Drain Piping PVC hard pipe of below sizes having minimum 3 mm wall thickness, insulated with 9 mm thick cross linked Polyethylene tube sections laminated with aluminium foil , joints to be sealed with solvent based adhesive & 2" aluminium adhesive tape : 32mm with 9 mm thick insulation
30
-
-
... More
Drain Piping PVC hard pipe of below sizes having minimum 3 mm wall thickness, insulated with 9 mm thick cross linked Polyethylene tube sections laminated with aluminium foil , joints to be sealed with solvent based adhesive & 2" aluminium adhesive tape : 25mm with 9 mm thick insulation
60
-
-
... More
Supply installation testing and commissioning of centralized remote controller to control up to 64 indoor units. It should have provision to control and monitor the AC System through web access anywhere with computer complete as per manufacturer specifications & as per directions of Engineer in charge. The quoted rates shall be inclusive of all taxes and levis, duties, lead, lift,transpotation, placing, scaffolding, core cutting of required diameter in walls, finishing and minor civil works and nothing shall be paid separately.
1
-
-
... More
Supply and laying of Control Cabling with copper conductor shielded copper cable FR / FRLS of approved make with end termination for indoor units (from indoor to outdoor unit & interconnecting control cabling & for CRC remote control from indoor to indoor to CRC controller). The cable should pass through hard PVC conduit. The cost of conduit should be included in cable cost.The quoted rates shall be inclusive of all taxes and levis, duties, lead, lift,transpotation, placing, scaffolding, core cutting of required diameter in walls, finishing and minor civil works and nothing shall be paid separately. : 3core*1.5 sq mm
100
-
-
... More
Supply and laying of Control Cabling with copper conductor shielded copper cable FR / FRLS of approved make with end termination for indoor units (from indoor to outdoor unit & interconnecting control cabling & for CRC remote control from indoor to indoor to CRC controller). The cable should pass through hard PVC conduit. The cost of conduit should be included in cable cost.The quoted rates shall be inclusive of all taxes and levis, duties, lead, lift,transpotation, placing, scaffolding, core cutting of required diameter in walls, finishing and minor civil works and nothing shall be paid separately. : 2.5 Sq mm x 3 Core
30
-
-
... More
Supply and laying of copper conductor cabling with 3-pin top & flexible conduit to connect IDU power supply including cable terminations like lugs, glands etc. Cables & accessories to be ISI marked. Average 2 m long.The quoted rates shall be inclusive of all taxes and levis, duties, lead, lift,transpotation, placing, scaffolding, core cutting of required diameter in walls, finishing and minor civil works and nothing shall be paid separately. 1.5 Sq mm x 3 Core
50
-
-
... More
Supplying and laying of complete cable work with glands, lugs and terminations, using XLPE insulated PVC sheathed steel tape/wire armoured underground copper conductor cables of following sizes for electric supply from main HVAC panel to various loads including interconnections from starters to VRF outdoor on suitable cable trays/supports as requried including connections on both sides as per specificaitons as required.The quoted rates shall be inclusive of all taxes and levis, duties, lead, lift,transpotation, placing, scaffolding, core cutting of required diameter in walls, finishing and minor civil works and nothing shall be paid separately. 16.0 Sq mm X 4 core
30
-
-
... More
Supply and charging of additional refrigerant gas (R - 410a) for the entire length of refrigerant piping and system.The quoted rates shall be inclusive of all taxes and levis, duties, lead, lift,transpotation, placing, scaffolding, core cutting of required diameter in walls, finishing and minor civil works and nothing shall be paid separately.
10
-
-
... More
Providng and fixing M.S Table top Stand suitable size of Angle Frame (min. -50*50*5mm) complete with 2 coats of Epoxy Red Oxide paint and 2 coats of Black Oil Enamel paint. Fabrication drawings to be approved by IISER prior to the execution. Foundation and Civil Works if required will also be in contractor Scope.The quoted rates shall be inclusive of all taxes and levis, duties, lead, lift,transpotation, placing, scaffolding, core cutting of required diameter in walls, finishing and minor civil works and nothing shall be paid separately.
1
-
-
... More
Supplying and laying of 3 x 4.0 sq mm PVC insulated copper conductor flexible cable.
40
-
-
... More
Supply and installation of M.S. stand for outdoor units.
2
-
-
... More
Supply and fixing of 16 Amps TPMCB along with enclose box of steel type.
2
-
-
... More
Supplying & fixing of suitable copper refrigerant piping for 2TR DX type cassette AC with minimum 9 mm thick insulation complete from indoor unit to outdoor unit with supports Etc.
30
-
-
... More
Gas Distribution System of Lab 301 by Supply , Installation , Testing and Commissioning of gas lines for Ultra-Pure nitrogen , Argon , Oxygen, Hydrogen and Carbon Mono-oxide at IISER Pune. Approved Expert GDS Agencies M/s EXCEL Gas & Equipments Pvt. Ltd. / M/s Sai Engineering,Pune / M/s S K Engineering Pune / M/s A B Process Technologies Pune as approved by Engineer In-charge.
-
-
-
... More
Manifold Block with mounting bracket : Fabricated Type for SS 304 1/4" System.
LABORATORY GAS DISTRIBUTION SYSTEM
Manual Change Over System with Workshop Fabricated Manifold.
Supply, installation, testing , commissioning of Gas Distribution System for Laboratory Gases in SS 304 seamless tube. All Joints shall be compression fittted ferrule type fittings of approved makes. System shall be tested and handed over at 10 bar pressure test till Manfold. All components up to manifold system of Gas Bank System shall be tested at minimum 150 bar and Leak free , full functional GDS system shall be handed over to IISER PUNE . Quoted rate shall be including all necessary fittings, tools , tackles , bending tool , welding machine , GST , lead , lift etc and all necessary equipment’s required at site. Agency shall submit PN & ID and obtain approval of Engineer In-Charge before taking-up GDS works. Wall marking shall be done showing GDS route actal at site and approval on profile making shall be obtained before fixing of tubes. System shall be guaranteed for 1 year for leakage and fittings , comprehensive guarantee of complete system shall be submitted on Rupees Five hundred bond paper with free replacement of defective components to IISER PUNE. Actual components listed below installed at site shall be measured for payments. Nothing extra shall be paid seperatly.
Material of Construction - SS 304 Approved Make : Factory Fabricated
15
-
-
... More
1/4 " cylinder Isolation Valve
LABORATORY GAS DISTRIBUTION SYSTEM
Supply, installation, testing , commissioning of Gas Distribution System for Laboratory Gases in SS 304 seamless tube. All Joints shall be compression fittted ferrule type fittings of approved makes. System shall be tested and handed over at 10 bar pressure test till Manfold. All components up to manifold system of Gas Bank System shall be tested at minimum 150 bar and Leak free , full functional GDS system shall be handed over to IISER PUNE . Quoted rate shall be including all necessary fittings, tools , tackles , bending tool , welding machine , GST , lead , lift etc and all necessary equipment’s required at site. Agency shall submit PN & ID and obtain approval of Engineer In-Charge before taking-up GDS works. Wall marking shall be done showing GDS route actal at site and approval on profile making shall be obtained before fixing of tubes. Actual components listed installed at site shall be measured for payments. Nothing extra shall be paid seperatly.
Material of Construction - Brass Coated Approved Make : Excel/ Ex-Lock/Panam/Tescom
15
-
-
... More
Cylinder mounted Two Stage Regulator (Inlet pressure 250 bar and outlet pressure 0 to 16 bar)
LABORATORY GAS DISTRIBUTION SYSTEM
Supply, installation, testing , commissioning of Gas Distribution System for Laboratory Gases in SS 304 seamless tube. All Joints shall be compression fittted ferrule type fittings of approved makes. System shall be tested and handed over at 10 bar pressure test till Manfold. All components up to manifold system of Gas Bank System shall be tested at minimum 150 bar and Leak free , full functional GDS system shall be handed over to IISER PUNE . Quoted rate shall be including all necessary fittings, tools , tackles , bending tool , welding machine , GST , lead , lift etc and all necessary equipment’s required at site. Agency shall submit PN & ID and obtain approval of Engineer In-Charge before taking-up GDS works. Wall marking shall be done showing GDS route actal at site and approval on profile making shall be obtained before fixing of tubes. Actual components listed installed at site shall be measured for payments. Nothing extra shall be paid seperatly.
Material of Construction - SS 304 304 Approve makes : Excel/ Ex-Lock/Panam/Tescom
15
-
-
... More
1/4 " OD Flexible Hose with bullnose connector & safety wire rope (1 meter long)
LABORATORY GAS DISTRIBUTION SYSTEM
Supply, installation, testing , commissioning of Gas Distribution System for Laboratory Gases in SS 304 seamless tube. All Joints shall be compression fittted ferrule type fittings of approved makes. System shall be tested and handed over at 10 bar pressure test till Manfold. All components up to manifold system of Gas Bank System shall be tested at minimum 150 bar and Leak free , full functional GDS system shall be handed over to IISER PUNE . Quoted rate shall be including all necessary fittings, tools , tackles , bending tool , welding machine , GST , lead , lift etc and all necessary equipment’s required at site. Agency shall submit PN & ID and obtain approval of Engineer In-Charge before taking-up GDS works. Wall marking shall be done showing GDS route actal at site and approval on profile making shall be obtained before fixing of tubes. Actual components listed installed at site shall be measured for payments. Nothing extra shall be paid seperatly.
Material of Construction - SS 304 304 , Approve makes : Excel/ Ex-Lock/Panam/Tescom
15
-
-
... More
Cylinder bracket with Chain
LABORATORY GAS DISTRIBUTION SYSTEM
Supply, installation, testing , commissioning of Gas Distribution System for Laboratory Gases in SS 304 seamless tube. All Joints shall be compression fittted ferrule type fittings of approved makes. System shall be tested and handed over at 10 bar pressure test till Manfold. All components up to manifold system of Gas Bank System shall be tested at minimum 150 bar and Leak free , full functional GDS system shall be handed over to IISER PUNE . Quoted rate shall be including all necessary fittings, tools , tackles , bending tool , welding machine , GST , lead , lift etc and all necessary equipment’s required at site. Agency shall submit PN & ID and obtain approval of Engineer In-Charge before taking-up GDS works. Wall marking shall be done showing GDS route actal at site and approval on profile making shall be obtained before fixing of tubes. Actual components listed installed at site shall be measured for payments. Nothing extra shall be paid seperatly.
Material of Construction - MS Powdwe coated , Approve makes : Excel/ Ex-Lock/Panam/Tescom
15
-
-
... More
Ball valve 1/4" OD
LABORATORY GAS DISTRIBUTION SYSTEM
Supply, installation, testing , commissioning of Gas Distribution System for Laboratory Gases in SS 304 seamless tube. All Joints shall be compression fittted ferrule type fittings of approved makes. System shall be tested and handed over at 10 bar pressure test till Manfold. All components up to manifold system of Gas Bank System shall be tested at minimum 150 bar and Leak free , full functional GDS system shall be handed over to IISER PUNE . Quoted rate shall be including all necessary fittings, tools , tackles , bending tool , welding machine , GST , lead , lift etc and all necessary equipment’s required at site. Agency shall submit PN & ID and obtain approval of Engineer In-Charge before taking-up GDS works. Wall marking shall be done showing GDS route actal at site and approval on profile making shall be obtained before fixing of tubes. Actual components listed installed at site shall be measured for payments. Nothing extra shall be paid seperatly.
Material of Construction - SS 304 , Approve makes : Excel/ Ex-Lock/Panam/Tescom
63
-
-
... More
Check valve 1/4 " NPTF x 1/4" NPTM
LABORATORY GAS DISTRIBUTION SYSTEM
Supply, installation, testing , commissioning of Gas Distribution System for Laboratory Gases in SS 304 seamless tube. All Joints shall be compression fittted ferrule type fittings of approved makes. System shall be tested and handed over at 10 bar pressure test till Manfold. All components up to manifold system of Gas Bank System shall be tested at minimum 150 bar and Leak free , full functional GDS system shall be handed over to IISER PUNE . Quoted rate shall be including all necessary fittings, tools , tackles , bending tool , welding machine , GST , lead , lift etc and all necessary equipment’s required at site. Agency shall submit PN & ID and obtain approval of Engineer In-Charge before taking-up GDS works. Wall marking shall be done showing GDS route actal at site and approval on profile making shall be obtained before fixing of tubes. Actual components listed installed at site shall be measured for payments. Nothing extra shall be paid seperatly.
Material of Construction - SS 304 , Approve makes : Excel/ Ex-Lock/Panam/Tescom
15
-
-
... More
SS 304 , Seamless Tube 1/4" OD
LABORATORY GAS DISTRIBUTION SYSTEM
Supply, installation, testing , commissioning of Gas Distribution System for Laboratory Gases in SS 304 seamless tube. All Joints shall be compression fittted ferrule type fittings of approved makes. System shall be tested and handed over at 10 bar pressure test till Manfold. All components up to manifold system of Gas Bank System shall be tested at minimum 150 bar and Leak free , full functional GDS system shall be handed over to IISER PUNE . Quoted rate shall be including all necessary fittings, tools , tackles , bending tool , welding machine , GST , lead , lift etc and all necessary equipment’s required at site. Agency shall submit PN & ID and obtain approval of Engineer In-Charge before taking-up GDS works. Wall marking shall be done showing GDS route actal at site and approval on profile making shall be obtained before fixing of tubes. Actual components listed installed at site shall be measured for payments. Nothing extra shall be paid seperatly.
Material of Construction - SS 304 , Approve makes : Excel/ Ex-Lock/Panam/Tescom
910
-
-
... More
Supply and installation of flash back arrester for Oxygen, Hydrogen and metane gasses
LABORATORY GAS DISTRIBUTION SYSTEM
Supply, installation, testing , commissioning of Gas Distribution System for Laboratory Gases in SS 304 seamless tube. All Joints shall be compression fittted ferrule type fittings of approved makes. System shall be tested and handed over at 10 bar pressure test till Manfold. All components up to manifold system of Gas Bank System shall be tested at minimum 150 bar and Leak free , full functional GDS system shall be handed over to IISER PUNE . Quoted rate shall be including all necessary fittings, tools , tackles , bending tool , welding machine , GST , lead , lift etc and all necessary equipment’s required at site. Agency shall submit PN & ID and obtain approval of Engineer In-Charge before taking-up GDS works. Wall marking shall be done showing GDS route actal at site and approval on profile making shall be obtained before fixing of tubes. Actual components listed installed at site shall be measured for payments. Nothing extra shall be paid seperatly. Approved Makes : Messer/GCE
5
-
-
... More
Supply and installation of flash back arrester connectors for Oxygen, Hydrogen and metane gas.
LABORATORY GAS DISTRIBUTION SYSTEM
Supply, installation, testing , commissioning of Gas Distribution System for Laboratory Gases in SS 304 seamless tube. All Joints shall be compression fittted ferrule type fittings of approved makes. System shall be tested and handed over at 10 bar pressure test till Manfold. All components up to manifold system of Gas Bank System shall be tested at minimum 150 bar and Leak free , full functional GDS system shall be handed over to IISER PUNE . Quoted rate shall be including all necessary fittings, tools , tackles , bending tool , welding machine , GST , lead , lift etc and all necessary equipment’s required at site. Agency shall submit PN & ID and obtain approval of Engineer In-Charge before taking-up GDS works. Wall marking shall be done showing GDS route actal at site and approval on profile making shall be obtained before fixing of tubes. Actual components listed installed at site shall be measured for payments. Nothing extra shall be paid seperatly. Approve makes : Excel/ Ex-Lock/Panam/Tescom or equi
6
-
-
... More
Supply and installation of FRL unit (Filter Regulator Lubricant) for compresed air line.
LABORATORY GAS DISTRIBUTION SYSTEM
Supply, installation, testing , commissioning of Gas Distribution System for Laboratory Gases in SS 304 seamless tube. All Joints shall be compression fittted ferrule type fittings of approved makes. System shall be tested and handed over at 10 bar pressure test till Manfold. All components up to manifold system of Gas Bank System shall be tested at minimum 150 bar and Leak free , full functional GDS system shall be handed over to IISER PUNE . Quoted rate shall be including all necessary fittings, tools , tackles , bending tool , welding machine , GST , lead , lift etc and all necessary equipment’s required at site. Agency shall submit PN & ID and obtain approval of Engineer In-Charge before taking-up GDS works. Wall marking shall be done showing GDS route actal at site and approval on profile making shall be obtained before fixing of tubes. Actual components listed installed at site shall be measured for payments. Nothing extra shall be paid seperatly. Approve makes : Excel/ Ex-Lock/Panam/Tescom
1
-
-
... More
Point of use regulator ( 10 bar inlet 7 bar Outlet) with Analog Dial Guage. 1/4" OD with Nozzels of 1" length.
LABORATORY GAS DISTRIBUTION SYSTEM
Supply, installation, testing , commissioning of Gas Distribution System for Laboratory Gases in SS 304 seamless tube. All Joints shall be compression fittted ferrule type fittings of approved makes. System shall be tested and handed over at 10 bar pressure test till Manfold. All components up to manifold system of Gas Bank System shall be tested at minimum 150 bar and Leak free , full functional GDS system shall be handed over to IISER PUNE . Quoted rate shall be including all necessary fittings, tools , tackles , bending tool , welding machine , GST , lead , lift etc and all necessary equipment’s required at site. Agency shall submit PN & ID and obtain approval of Engineer In-Charge before taking-up GDS works. Wall marking shall be done showing GDS route actal at site and approval on profile making shall be obtained before fixing of tubes. Actual components listed installed at site shall be measured for payments. Nothing extra shall be paid seperatly.
Material of Construction - SS 304 304 Approve makes : Excel/ Ex-Lock/Panam/Tescom
30
-
-
... More
Tee 1/4" x 1/4" x 1/4" OD
LABORATORY GAS DISTRIBUTION SYSTEM
Supply, installation, testing , commissioning of Gas Distribution System for Laboratory Gases in SS 304 seamless tube. All Joints shall be compression fittted ferrule type fittings of approved makes. System shall be tested and handed over at 10 bar pressure test till Manfold. All components up to manifold system of Gas Bank System shall be tested at minimum 150 bar and Leak free , full functional GDS system shall be handed over to IISER PUNE . Quoted rate shall be including all necessary fittings, tools , tackles , bending tool , welding machine , GST , lead , lift etc and all necessary equipment’s required at site. Agency shall submit PN & ID and obtain approval of Engineer In-Charge before taking-up GDS works. Wall marking shall be done showing GDS route actal at site and approval on profile making shall be obtained before fixing of tubes. Actual components listed installed at site shall be measured for payments. Nothing extra shall be paid seperatly.
Material of Construction - SS 304 304 , Approve makes : Excel/ Ex-Lock/Panam/Tescom
34
-
-
... More
Flow Meters range (0-250 ml/m)
LABORATORY GAS DISTRIBUTION SYSTEM
Supply, installation, testing , commissioning of Gas Distribution System for Laboratory Gases in SS 304 seamless tube. All Joints shall be compression fittted ferrule type fittings of approved makes. System shall be tested and handed over at 10 bar pressure test till Manfold. All components up to manifold system of Gas Bank System shall be tested at minimum 150 bar and Leak free , full functional GDS system shall be handed over to IISER PUNE . Quoted rate shall be including all necessary fittings, tools , tackles , bending tool , welding machine , GST , lead , lift etc and all necessary equipment’s required at site. Agency shall submit PN & ID and obtain approval of Engineer In-Charge before taking-up GDS works. Wall marking shall be done showing GDS route actal at site and approval on profile making shall be obtained before fixing of tubes. Actual components listed installed at site shall be measured for payments. Nothing extra shall be paid seperatly. Approve makes : Excel/ Ex-Lock/Panam/Tescom
15
-
-
... More
Purification panel for the gases with moisture trap & oxygen trap with pressure regulator, toggle valve inlet & outlet connection of size 1/4".OD
LABORATORY GAS DISTRIBUTION SYSTEM
Supply, installation, testing , commissioning of Gas Distribution System for Laboratory Gases in SS 304 seamless tube. All Joints shall be compression fittted ferrule type fittings of approved makes. System shall be tested and handed over at 10 bar pressure test till Manfold. All components up to manifold system of Gas Bank System shall be tested at minimum 150 bar and Leak free , full functional GDS system shall be handed over to IISER PUNE . Quoted rate shall be including all necessary fittings, tools , tackles , bending tool , welding machine , GST , lead , lift etc and all necessary equipment’s required at site. Agency shall submit PN & ID and obtain approval of Engineer In-Charge before taking-up GDS works. Wall marking shall be done showing GDS route actal at site and approval on profile making shall be obtained before fixing of tubes. Actual components listed installed at site shall be measured for payments. Nothing extra shall be paid seperatly. Approve makes : Excel/ Ex-Lock/Panam/Tescom
14
-
-
... More
Union 1/4" diameter
LABORATORY GAS DISTRIBUTION SYSTEM
Supply, installation, testing , commissioning of Gas Distribution System for Laboratory Gases in SS 304 seamless tube. All Joints shall be compression fittted ferrule type fittings of approved makes. System shall be tested and handed over at 10 bar pressure test till Manfold. All components up to manifold system of Gas Bank System shall be tested at minimum 150 bar and Leak free , full functional GDS system shall be handed over to IISER PUNE . Quoted rate shall be including all necessary fittings, tools , tackles , bending tool , welding machine , GST , lead , lift etc and all necessary equipment’s required at site. Agency shall submit PN & ID and obtain approval of Engineer In-Charge before taking-up GDS works. Wall marking shall be done showing GDS route actal at site and approval on profile making shall be obtained before fixing of tubes. Actual components listed installed at site shall be measured for payments. Nothing extra shall be paid seperatly.
Material of Construction - SS 304 304 , Approve makes : Excel/ Ex-Lock/Panam/Tescom
144
-
-
... More
PP clamp set 1/4" OD
LABORATORY GAS DISTRIBUTION SYSTEM
Supply, installation, testing , commissioning of Gas Distribution System for Laboratory Gases in SS 304 seamless tube. All Joints shall be compression fittted ferrule type fittings of approved makes. System shall be tested and handed over at 10 bar pressure test till Manfold. All components up to manifold system of Gas Bank System shall be tested at minimum 150 bar and Leak free , full functional GDS system shall be handed over to IISER PUNE . Quoted rate shall be including all necessary fittings, tools , tackles , bending tool , welding machine , GST , lead , lift etc and all necessary equipment’s required at site. Agency shall submit PN & ID and obtain approval of Engineer In-Charge before taking-up GDS works. Wall marking shall be done showing GDS route actal at site and approval on profile making shall be obtained before fixing of tubes. Actual components listed installed at site shall be measured for payments. Nothing extra shall be paid seperatly. Approve makes : Excel/ Ex-Lock/Panam/Tescom
730
-
-
... More
Alluminium profile
LABORATORY GAS DISTRIBUTION SYSTEM
Supply, installation, testing , commissioning of Gas Distribution System for Laboratory Gases in SS 304 seamless tube. All Joints shall be compression fittted ferrule type fittings of approved makes. System shall be tested and handed over at 10 bar pressure test till Manfold. All components up to manifold system of Gas Bank System shall be tested at minimum 150 bar and Leak free , full functional GDS system shall be handed over to IISER PUNE . Quoted rate shall be including all necessary fittings, tools , tackles , bending tool , welding machine , GST , lead , lift etc and all necessary equipment’s required at site. Agency shall submit PN & ID and obtain approval of Engineer In-Charge before taking-up GDS works. Wall marking shall be done showing GDS route actal at site and approval on profile making shall be obtained before fixing of tubes. Actual components listed installed at site shall be measured for payments. Nothing extra shall be paid seperatly. Approve makes : Excel/ Ex-Lock/Panam/Tescom
49
-
-
... More
Wire Smart Gas Transmitter Flameproof Version
- CE Certified
- Area of Application : Lab Application
- Along with SS Buzzer Cum Flasher
- Gas to be Detected: Hydrogen
- Range: 0 to 100% LEL
- Detection Principle : CatalyticBead
- Display: 8X2 Alphanumeric LCD display withBacklit
8 LEDs to indicate status of instrument
-Setting: By using Magnetic pen for Flameproof model
-Supply Voltage: 18 To 36V Dc Typically 24V DC
-Standard Output : 4-20mA Current Output.
- Output 2.: THREE SPDT Relays ‘2A/120VAC, 2A/24VDC'
-Error Detection : During Sensor Break or Open the
Display Shows SENSOR OPEN & During Over range the
Display Shows OVER RANGE
-Operating Temperature : -15 degree C to 55 degreeC
- Protection Class : IP 66
- Cabinet Material : Cast Alluminium Alloy LM-6
- Sensor Housing : SS 316 or PPS
Please refer attached PDF catalogue Model GT-2511
- Sensor Life :
18-24 months depends on Application
& Site Condition.
- Calibration of Sensor:
Calibration of sensor is highly recommended
ONE'S in a Year & If your process is Critical
Then test / calibration has to be done
Every Quarter Approved Makes Ambetronics/Honeywell/PCS
1
-
-
... More
3 Wire Smart Gas Transmitter Flameproof Version
- CE Certified
- Area of Application : Lab Application
- Along with SS Buzzer Cum Flasher
- Gas to be Detected: Methane
- Range: 0 to 100% LEL
- Detection Principle : CatalyticBead
- Display: 8X2 Alphanumeric LCD display withBacklit
8 LEDs to indicate status of instrument
-Setting: By using Magnetic pen for Flameproof model
-Supply Voltage: 18 To 36V Dc Typically 24V DC
-Standard Output : 4-20mA Current Output.
- Output 2.: THREE SPDT Relays ‘2A/120VAC, 2A/24VDC'
-Error Detection : During Sensor Break or Open the
Display Shows SENSOR OPEN & During Over range the
Display Shows OVER RANGE
-Operating Temperature : -15 degree C to 55 degreeC
- Protection Class : IP 66
- Cabinet Material : Cast Alluminium Alloy LM-6
- Sensor Housing : SS 316 or PPS
Please refer attached PDF catalogue Model GT-2511
- Sensor Life :
18-24 months depends on Application
& Site Condition.
- Calibration of Sensor:
Calibration of sensor is highly recommended
ONE'S in a Year & If your process is Critical
Then test / calibration has to be done
Every Quarter Approved Makes Ambetronics/Honeywell/PCS
1
-
-
... More
3C X 1.5 sqmm copper armoured stranded control cable
Supply, laying and commissioning of following size 1.1KVgrade XLPE PVC insulated armoured copper conductor cable, on cable tray with all installation materials including necessary double compression glands and terminations. Approved Makes Ambetronics/Honeywell/PCS
50
-
-
... More
Electrical works at Petrochemistry laboratory at IISER Pune
-
-
-
... More
CABLE : Laying of MV cable: MV Cable Laying: Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct / on surface as required.
Upto 35 sq. mm
150
-
-
... More
Cable termination :End termination of Cu cable : Supply, loading ,transportation unloading at site, storages at site ,shifting from storage place to site,and making end termination with brass compression gland and copper lugs for following size of PVC insulated and PVC sheathed/ PVC COPPER conductor cable of 1.1KV grade of following sizes as required
4 x 16 Sq.mm Copper ,XLPE Armourd Cable
2
-
-
... More
End termination of Cu cable : Supply, loading ,transportation unloading at site, storages at site ,shifting from storage place to site,and making end termination with brass compression gland and copper lugs for following size of PVC insulated and PVC sheathed/ PVC COPPER conductor cable of 1.1KV grade of following sizes as required
4 x 6Sq.mm Copper ,XLPE Armourd Cable
4
-
-
... More
M.V. Cu Cable supply : Supply, loading ,transportation unloading at site, storages at site ,shifting from storage place to site, of 1100 Volts grade XLPE insulated over all FRLS outersheathed, Copper conductor, armoured LT power cables of as per IS :1554 (Part 1) of following sizes. .( Note :- Cable shall be considered flat armoured type )
4X6 sq.mm Copper ,XLPE Armourd Cable
80
-
-
... More
M.V. Cu Cable supply : Supply, loading ,transportation unloading at site, storages at site ,shifting from storage place to site, of 1100 Volts grade XLPE insulated over all FRLS outersheathed, Copper conductor, armoured LT power cables of as per IS :1554 (Part 1) of following sizes. .( Note :- Cable shall be considered flat armoured type )
4X16 sq.mm Copper ,XLPE Armourd Cable
80
-
-
... More
Supplying and laying 6 SWG G.I. wire at along with cable on surface / open tray etc as required, including connection/ termination with GI thimble etc. as required.
80
-
-
... More
Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required. 1 run of cable
1000
-
-
... More
MCCB,MCB&DB'S Supplying and fixing 63 A rating, 240/415 V, 10 kA, "C"curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. FOUR pole
2
-
-
... More
Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top along with 20 A "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.
3
-
-
... More
Supplying and fixing 30 A, 415 V, TPN Industrial type socket outlet, with 4 pole and earth, metal enclosed plug topalongwith 30 A "C" curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet and complete with connections, testing and commissioning etc. as required.
5
-
-
... More
Submain Wiring : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 4 sq. mm + 1 X 4 sq. mm earth wire
500
-
-
... More
Submain Wiring : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 4 X 4 sq. mm + 1 X 4 sq. mm earth wire
150
-
-
... More
Wiring conduits : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 20 mm
100
-
-
... More
Wiring accessories : Supply & fixing following modular switch/ Socket on the exisiting modular plate & switch box including connection but excluding modular plate etc. as required 5/6 amps switch (For Power socket)
60
-
-
... More
Wiring accessories :Supply & fixing following modular switch/ Socket on the exisiting modular plate & switch box including connection but excluding modular plate etc. as required : 15/16 amp switch (For Power socket)
10
-
-
... More
Wiring accessories: Supply & fixing following modular switch/ Socket on the exisiting modular plate & switch box including connection but excluding modular plate etc. as required : 3 pin 5/6 amp socket outlet (For Power socket)
60
-
-
... More
Wiring accessories: Supply & fixing following modular switch/ Socket on the exisiting modular plate & switch box including connection but excluding modular plate etc. as required : 6 pin 15/16 amp socket outlet (For Power socket)
10
-
-
... More
Supply and fixing modular blanking plate on the exisitng modular plate & switch box with matching colour including connection but excluding modular plate etc as required.
40
-
-
... More
Supply and making end termination for UTP 4 pair CAT 6 LAN cable with required IO modules which is suitable for modular type base , cover plates and accessories ( At field side ) as required.
25
-
-
... More
Supply and making end termination for UTP 4 pair CAT 6 LAN cable with required IO modules which is suitable for modular type base , cover plates and accessories ( At rack side ) as required.
25
-
-
... More
Base and cover plate : Supplying and fixing following Modular base & cover plate ( Clip on support for mounting switches etc) on existing DLP U PVC trunking etc. as required. 6 module
30
-
-
... More
Supplying and fixing following Modular base & cover plate ( Clip on support for mounting switches etc) on existing DLP U PVC trunking etc. as required. 2 module
25
-
-
... More
Supplying and fixing following Modular base & cover plate ( Clip on support for mounting switches etc) on existing DLP U PVC trunking etc. as required. 4 module
10
-
-
... More
Supply and fixing of seperation partition in existing DLP U PVC trunking as required.
80
-
-
... More
Network accessories: Supply & installation of 24 port Jack fully loaded Patch Panel, make D link with required accessories as complete.
1
-
-
... More
Network accessories : Supply and fixing of CAT 6 patch cord 2 m in length as required.
50
-
-
... More
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C"curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
Single pole
30
-
-
... More
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C"curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Tripal pole
5
-
-
... More
Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB where 3 phase outlets are required.) 4 way (4 + 12), Double door
2
-
-
... More
SITC of 2 Megapixel IP dome camera, 2MP full real time recording, 1/2.8 CMOS, 3.6 mm @F1.6, Angle of View: 79 deg lence, 1/25s ~ 1/ 100000s, 0.1 lux @F1.2 Color, H.264 / MJPEG, High Profile dual-stream, 1080p, 720p, D1, CIF resolution, IR renge of 10 - 20 m, RJ-45 connector, ONVIF S interference protecol, IP 66, Motion Detection-396 zones,Privacy Masking-4 zones, 12VDC with required PVC Box & all accessaries.
13
-
-
... More
SITC of 16 CH IPC input NVR, 2 SATA HDD Slot (Max 8TB), with 4 TB hard disk-01 Nos of approved make,Realtime Recording Resolution (16 Channels @ 720P,8 Channels @1080P),Real-time Local Playback( 16 Channels @720P,2 Channels @1080P),Multiplex operation,Standard H.265, H.264 profile,BNC/VGA/HDMI output, main profile, baseline,HDD edundancy,Free DDNS, backup -USB Device & Network, USB HDD, USB 2.0 x 2, SATA writer,1 RS485, support 18 kinds of PTZ protocols,ONVIF 2.0,16 CH IPC audio
input and Output- RCA x 1, Power supply of DC12V/1.5A.
1
-
-
... More
SITC of 8 port ( PoE)Ethernet Routing Switch with 10/100/1000 (802.3af/at) PoE ports plus 2 SFP ports with 1 no of compalitable module (standalone). Incl Base S/w Lic Kit. (RoHS compliant). Access PoE+ switches with PoE budget of 150W, (UK & IRE power cord).
1
-
-
... More
Supplying and drawing of UTP 4 pair CAT 6 LAN armoured Cable in the existing surface/ recessed Steel/ PVC conduit/trench as required.
900
-
-
... More
Supply and making end termination for UTP 4 pair CAT 6 LAN cable with RJ-45 connector which is suitable as required.
26
-
-
... More
Road work : Specialized agencies : For execution of Bitumen road work Main L1 Agency shall associate and execute through specialized agency only as per the laid down minimum eligibility criteria in tender document and submit the detail of MOU of such agencies to Engineer in charge before starting execution.
-
-
-
... More
Scarifying the existing bituminous road surface to a depth of 50 mm and disposal of scarified material within all lifts and lead upto 1km (by mechanical means). (Rate including of all taxes,GST,labours, Machinery, materials nothing extra shall be payable)
3100
-
-
... More
Providing and applying tack coat using hot straight run bitumen of grade VG - 10, including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications : On bituminous surface @ 0.50 Kg / sqm. (Rate including of all taxes,GST,labours, Machinery, materials nothing extra shall be payable)
6200
-
-
... More
Providing and laying Bituminous concrete using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equiped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction and density as per specification, complete and as per directions of Engineer-in-Charge. compacted thickness with bitumen of grade VG-30 @ 5.5% (percentage by weight of total mix) and lime filler @ 3% (percentage by weight of Aggregate) prepared in Batch Type Hot Mix Plant of 100-120 TPH capacity
110
-
-
... More
Providing and laying seal coat of premixed fine aggregate ( passing 2.36 mm and retained on 180 micron sieve) with bitumen using 128 kg of bitumen of grade VG - 10 bitumen per cum of fine aggregate and 0.60 cum of fine aggregate per 100 sqm of road surface, including rolling and finishing with road roller all complete
3100
-
-
... More
Providing and applying 2.5 mm thick road marking strips (retroreflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications.
100
-
-
... More
Taking out existing kerb stones of all types from footpath/ central verge, including removal of mortar etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge
600
-
-
... More
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). approved make Precast india/Basant Batten/KK/floor well or equivalent make. apprx size 450mmx450mmx150mm
50
-
-
... More
Providing, laying percast kerb channel 200 cm wide and 50 mm thick with cement concrete M25, well rammed and consolidated and grouted with fine sand, including finishing the top smooth etc. complete and as per direction of Engineer-in-charge. Including removing exising drain , excavation , machine cutting of road to fit drain.
10
-
-
... More
Cleaning of pavments inside the IISER Pune campus by Automatic Road Cleaning machine followed by manual labourers for fine cleaning. Width of pavment shall be 7 meter . Kerbs shall cleaned manually by water pressure jet machine manually , foortpath and pathways shall be sweeped manually. Quoted rate shall be including cost of driver , fule , operator , minimum 2 ( two ) sweepers. Collected debries shall be dumped at approved location within IISER Pune. Cleaning shall be one time , footpath shall be covered in the measurment of pavments , shall not be measured seperatly. Actual length of cleaned road shall be measured for payments , nothing extra shall be paid seperatly.
18000
-
-
... More
H Cross false Ceiling
-
-
-
... More
Providing & fixing false ceiling at all height including providing & fixing of framework made of special section, power pressed from M.S. sheets and galvanised with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleat of size 25mm wide x 1.6mm thick with flanges of 27mm and 37mm, at 1200mm c/c, one flange fixed to the ceiling with dash fastener 12.5mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25 x10 x0.50mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I chanels 45 x15 x 0.90mm running at the spacing of 1200 mm c/c, to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26 mm each having lips of 10.5mm, at 450mm c/c, shall be fixed in a direction perpendicular to G.I intermediate channel with connecting clip made out of 2.64mm dia x 230mm long G.I wire at every junction, including fixing perimeter channels 0.50mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/ partitions with the help of Rawl plugs at 450mm centre, with 25mm long dry wall screws @ 230mm interval, including fixing of Calcium Silicate Board to ceiling section and perimeter channels with the help of dry wall screws of size 3.5 x25mm at 230mm c/c, including jointing & finishing to a flush finish of tapered and square edges of the board with ecommended jointing compounds, jointing tapes,finishing with jointing compounds in three layers covering up to 150mm on both sides of joints and two coats of primer suitable for boards, all as per manufacture's specification and also including the cost of making opening for light fittings, grills, diffusers, cut outs made with frame of perimeter channels suitably fixed, all complete as per drawings, specificaton and direction of the Engineer in charge but excluding the cost of painting with: 8 mm thick Calcium Silicate Board made with Calcareous & Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process. Quoted rates shall be including removal of old damaged false ceiling GST , labour, lead , lift , trasportation etc complete. Nothing extra shall be paid seperatly. Boards shall be painted prior to installtion outside site and to be fixed at site for ready to use.
858
-
-
... More
Providing and fixing aluminium work for support of false ceiling in extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. : For Supports of ceiling above roofing . Bare aluminium section of approved size and thickness . Quoted rates shall be including GST , labour, lead , lift , trasportation etc complete. Nothing extra shall be paid seperatly. Approved Make JINDAL/BARUKA/Indian Aluminium Co. Quoted rates shall be including GST , labour, lead , lift , trasportation etc complete. Nothing extra shall be paid seperatly.
858
-
-
... More
Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall/ceiling surface to prepare the surface even and smooth complete.Quoted rate shall be including at taxes , duties , royalties , lead, lift , trasportation , insurance , GST , etc. Nothing extra shall be paid seperatly. Approved Makes Nerolac/Dulux/Asian.
1029.6
-
-
... More
Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content.With oil thinnable primer on ceiling surface having VOC content less than 50 grams/litre.Minimum 2 coats .Quoted rate shall be including at taxes , duties , royalties , lead, lift , trasportation , insurance , GST ,etc. Nothing extra shall be paid seperatly. Approved Makes Nerolac/Dulux/Asian.
2059.2
-
-
... More
Painting of ceiling with synthetic enamel paint of satin finish approved brand and manufacture to give an even shade : Two or more coats on new work. Quoted rate shall be including at taxes , duties , royalties , lead, lift , trasportation , insurance , GST , etc. Nothing extra shall be paid seperatly. Shade and scheme shall be got approved from Engineer In-charge before taking-up work. Application methodology as specifified by Manufactorer. Approved Makes Nerolac/Dulux/Asian.
4118.4
-
-
... More
Removal of modular false ceiling system of size 595X595 along with grid system. All ceiling grid system and tiles shall be removed , inspected for intactness , shall be stacked , packed inside suitable size box and to be handed over to IISER Pune campus as per Director of Engineer In-charge. All 4' tee/2' tee , main runners shall be removed , tagged and stacked in IISER Pune Campus. All ceiling tiles shall be stacked carefully.Rate shall be inclusive of scaffolding etc. complete . Nothing extra shall be paid separately.
858
-
-
... More
Light Fittigns for H Cross
-
-
-
... More
Supply of direct optical design LED 600x600mm fitting made of CRCA powder quoted finish delivering soft and uniform light for visual comfort and a minimum system lumen output of 3000 lumens and maximum system wattage of 36W, LED Used shall be SMD type and fixture should have minimum efficacy at System level (Not Chip Level) =100lumens/watt, Life of fixture 50000hrs@L70% Lumen maintenance, CCT up to 6500, CRI 80, PF 0.95 and SDCM 4 for good light quality, an operating Voltage Range of 140 - 270 V.Minimum Internal Surge Protection 2.5KV The fixture should comply with the parameters as per IS10322. The LED driver should comply to IEC61000-3-2 ed.3.2, 2009 for Harmonics, IEC61347 -2 -13, 2006 in Conjunction with IEC61347-1 ed.2.0, 2007 for Electrical Safety, IEC62384 ed.1.1, 2011 for performance and IEC61547 ed.2.0, 2009, CISPR-15 for EMI. Manufacturer shall have inhouse lab approved by NABL or ministry of science of govt of India. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters. Make Wipro / Syska / Philips/crompton/havells
80
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements