Indian Institute Of Science Education And Research Tender

Providing and fixing wall paneling by 8mm tapered edge calcium silicate board made with calcareous & siliceous materials reinforced with cellulose fiber manufactured through autoclaving process to give stable crystalline structure with compressive strength 225 kg/ sq.cm, Bending strength 100 kg/sq.cm over frame work of aluminium /GI/MS etc all complete as per the drawing & directions of engineer-in-charge, the joints of the boards are finished with specially formulated jointing compound and 48 mm wide jointing tape to provide seamless finish.Frame works shall be measured in respective items. Quoted rate shall be including removing of existing damaged ceiling , making proper supporting arrangement , scaffolding upto 5 meter etc complete. Actual area of board shall be measured for payment.

FAÇADE SIDE WOODEN PANELING: Providing and fixing 18mm thick MR grade plywood panelling duly with lamination of 1mm thick face laminate of approved brand and manufactureof required shade with all exposed side edges shall be sealed with 2mm thick PVC edge banding (Rehau or Marion) etc complete as per specification and direction of the Engineer in charge.Quoted rate shall including cost of material, labour, wastage, glue for pasting laminate, groove pattern , groove shall be finished with paint. Actaul area of plywork including lamination shall be measured for payment

FALSE CEILING: Providing & fixing false ceiling at all height including providing & fixing of framework made of special section, power pressed from M.S. sheets and galvanised with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleat of size 25mm wide x 1.6mm thick with flanges of 27mm and 37mm, at 1200mm c/c, one flange fixed to the ceiling with dash fastener 12.5mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25 x10 x0.50mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I chanels 45 x15 x 0.90mm running at the spacing of 1200 mm c/c, to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26 mm each having lips of 10.5mm, at 450mm c/c, shall be fixed in a direction perpendicular to G.I intermediate channel with connecting clip made out of 2.64mm dia x 230mm long G.I wire at every junction, including fixing perimeter channels 0.50mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/ partitions with the help of Rawl plugs at 450mm centre, with 25mm long dry wall screws @ 230mm interval, including fixing of Calcium Silicate Board to ceiling section and perimeter channels with the help of dry wall screws of size 3.5 x25mm at 230mm c/c, including jointing & finishing to a flush finish of tapered and square edges of the board with recommended jointing compounds, jointing tapes,finishing with jointing compounds in three layers covering up to 150mm on both sides of joints and two coats of primer suitable for boards, all as per manufacture's specification and also including the cost of making opening for light fittings, grills, diffusers, cut outs made with frame of perimeter channels suitably fixed, all complete as per drawings, specificaton and direction of the Engineer in charge but excluding the cost of painting with: 8 mm thick Calcium Silicate Board made with Calcareous & Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process.

OPEN CELL CEILING : Providing and fixing Open Cell grid with framework false ceiling for fixing with open ceill tiles at all heights with metal false ceiling tiles of Size 595x595mm of approved design and patterns as per Specifications to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanised iron section of 0.33mmthick (galvanized @ 120 grams per sqm including both sides)comprising of main-T runners of size 24x38 mm of length 3000 mm,cross - T of size 24x32 mm of length 1200 mm and secondaryintermediate cross-T of size 24x32 mm of length 600mm to ormgrid module of size 600 x 600 mm, suspended from ceiling usinggalvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 12x50 mm long dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 76x25x25x1.6 mm fixed with grid and Z cleat of size 25x37x25x1.6mm thick with precut hole on both 25mm flange to pierce into 12x50mm or even bigger size dash fastener if require, fixed with Glavanised iron perimeter wall angle or size 24x24x0.40 mm of length 3000mm to be fixed on periphey wall / partition with the help of plastic rawl plugs at 450mm center to center and 40 mm long dry wall S.S screws. The workshall be carried out as per specifications, drawing and as per directionsof the Engineer-in-Charge. Actual are of Cells shall be equal 8X8 of size shall be 75mm X 75mm each. Approved make IGL / Armstrong / Atiris

DOOR AND WINDOWS: Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. Approved Make Marino/Greenlam/Kitply

Providing & fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede or any finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 1.5 mm thick laminate. Approved Make Marino/Greenlam/Kitply

Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured).

Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors (cost of glass excluded) (overall area of door shutter to be measured): Rectangular or square

Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. Approved Make Hafele/Hettich/Godrej

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 150x10 mm Approved Make Hafele/Hettich/Godrej

Providing and fixing concealed type aluminium die cast body tubular type universal hydraulic door closer (having brand logo embossed on the body, door weight minimum 60 kg and door width upto 1200 mm), with necessary accessories and screws etc. complete. Quoted rate shall be including chasing of as per OEM specifications and fixing of door closer. Approved Make Dorset/Ozone/Hettich/Yale

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 8 mm thickness (weight not less than 20 kg/sqm).

Providing and fixing wall/window paneling by 8mm tapered edge calcium silicate board made with calcareous & siliceous materials reinforced with cellulose fiber manufactured through autoclaving process to give stable crystalline structure with compressive strength 225 kg/ sq.cm, Bending strength 100 kg/sq.cm over frame work of aluminium /GI/MS etc all complete as per the drawing & directions of engineer-in-charge, the joints of the boards are finished with specially formulated jointing compound and 48 mm wide jointing tape to provide seamless finish.Aluminium frame works shall be measured in respective items. Quoted rate shall be including cost of start headed screws , supporting arrangement , scaffolding upto 5 meter etc complete. Actual area of board fixed at site shall be measured for payments. Nothing extra shall be paid seperaatly.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) .Powder coated aluminium (minimum thickness of powder coating 50 micron). Quoted rates shall be including GST , labour, lead , lift , trasportation etc complete. Nothing extra shall be paid seperatly. Approved Make JINDAL/BARUKA/Indian Aluminium Co : For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots/Sliding and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron) Quoted rates shall be including GST , labour, lead , lift , trasportation etc complete. Nothing extra shall be paid seperatly.

Providing and applying two or more coats of Luster paint on wall and ceiling including two coat of approved primer on wall and ceiling with roller finish including preparation of surface by crack filling with expandable specialized crack filler, sand papering and applying primer, 1mm gypsum putty in line and level to all surface in line and level, two or more coat Paint on complete surface so as have and even and smooth surface, scaffolding all leads and lifts, labour , removal of existing old paint scraping, making surface ready for putty and cost of materials complete as per direction of Engineer-in-charge. Quoted rate shall be including expandable acrylic morter in the cracks to prevent opening of cracks after painting in internal walls at any heights with Sika cracksil Acrylic paste / Dr.fixit crack-X paste /Dulux crack fill (ready to use paste) prepare surface by cleaning (Rate is inclusive of cost of all operations, material labour, all taxes, GST , etc. and nothing extra shall be payable).

WOODEN FURNITURE WORKS - DESKING AND WALL UNITS

Design, manufacturing, assembling, transporting and placing in position knock down modular custom made furniture such as table, pedestal units, wall hung storage, classrooms desks, student hostel furniture, etc. as per architectural drawings/layouts, technical specifications and directions of Engineer-in- charge. In general all outer exposed edges of all panels shall be covered sealed with 2m thick PVC edge banding tape, Rehau Dollkin or equivalent make and post formed edge in front exposed side and all concealed and butt of all panels shall be covered and sealed with 0.7mm edge banding tape of same make with hot melt glue banding machine at required temperature for table tops. All joinery fabrication work shall be done with minifix fittings (Hettich, Aries, Efficient cadget Ltd. or equivalent), plastic/Stainless steel dowels, Stainless steel screws washers in approved factory supplying minifix fittings, closing loaded hinges multipurpose lock, Stainless steel handles of approved design etc. All under bench supporting structure shall be consisting of M S tubes round/square as per co standard design with zinc phosphated/degreased and epoxy powder coated 50 to 60 microns DFT, nuts and bolts, rivets, pins complete as per approved drawings and direction of the Engineer in charge and shall be paid under sub items described in bill of quantities below.

Providing, fixing and supply of under bench supporting structure shall be consisting of CRC / M S tubes round/square as per co standard design with zinc phosphated/degreased and epoxy powder coated 50 to 60 microns DFT, nuts and bolts, rivets, pins complete as per approved drawings and direction of the Engineer in charg. Actual weight of finished steel members provided at site including nuts and bolts etc shall be measured for payment.

Providing and fixing 18mm thick MR grade plywood duly machine pressed laminated with 1mm thick face laminate of approved brand and manufacture and balance laminate shall be 0.8mm thick laminate of required shade with all exposed side edges shall be sealed with 2mm thick PVC edge banding (Rehau or equivalent) in modesty panels, side panels, drawers and storages etc complete as per specification and direction of the Engineer in charge.

Wall Cabinates : Providing and fixing 18mm thick MR grade plywood duly machine pressed laminated with 1mm thick face laminate of approved brand and manufacture and balance laminate shall be 0.8mm thick laminate of required shade with all exposed side edges shall be sealed with 2mm thick PVC edge banding (Rehau) in Wall Cabinates, racks and furniture works. etc complete as Quoted rate shall be including cost of 100mm fastners , 6 fastner for each sqm along with suitable holddown washer per specification and direction of the Engineer in charge.

Providing and fixing stainless steel auto close hinges with soft closing Ebco/Haffele/Godrej/Hettich as appoved by engineer-in-charge etc complete as per the direction of Engineer in charge.

Providing & fixing of SS matt finished handles to Wall unit and pesdestal unit of Ebco/Haffele/Godrej/Hettich as appoved by engineer-in-charge.-Handles- 150mm

Providing & fixing of SS matt finished tower bolts to storage unit of Ebco/Haffele/ Godrej/Hettich or equivalent as appoved by engineer-in-charge.-Tower bolts- 75mm

Table Tops: Providing and fixing polished granite on table top of approved shade and texure polished Granite stone flooring in required design and patterns and one side round moulding, in linear as well as curvilinear portions all complete as per the architectural drawings, with 18 mm thick stone slab etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab Jet Black, Multi Red, Steel grey , sinduri red , Sadarhalli , Chikku Brown,or as approved bt Engineer In-charge. Quoted rate shall be including disposing of debries at approved dumping ground within campus , providing and fixing new granite .Quoted rate shall be including GST , trasportation , lead , lift ,wastage, scaffolding etc complete. Nothing extra shall be paid seperatly. Actual area of new granite laid at site shall be measured for payments.

Providing and fixing 3 drawer Pedestal unit size: 390mm (W) x 440mm(D) x 646mm (H) mdae up from CRCA powder coated body 1mm thick coil and 12mm prelaminated MDF board front fesia for drawers including recessed handles, sliders and centralized locking system decorative leg shoe / revolving type 360 degree castors. All exposed side edges shall be sealed with 2mm thick PVC edge banding (Rehau or equivalent) machine pressed etc complete as per the direction of Engineer in charge. All fittings shall be hettich/ hafle / ebco

LEG SHOE & LEVELLERS Providing, fixing and supply of leg shoe made nylon 6 to mount levelers as per standard design on the legs of furniture with + 50 mm height adjustment. Levelers are made of Nylon 6 with M8 bolts insert molded to take care of floor undulation.

Chairs : Providing and arranging Chair with Stainless steel Legs and PVC seating arranagement and back rest. Overall Chair size shall be H 800 x W 580 x D 440 mm. Seat Size shall be 435mmX 420mm and back rest shall be 400X 435mm, both seat and backrest combined single piece unit of PVC material. Chair shall have 1'' side moulding at seat on all three sides like fesia. Chair Shall have four stainless steel legs of minimum 12mm diameter of suitable guage to withstand load on chair of 125KG for 6hours contineous loading withour deflection. PVC factory moulded seat and back rest shall be minimum 7mm thickness with inbuilt load distribution patten on backside and arrangement to hold legs.Colour of PVC seating arrangement shall be as selected by Engineer In-charge, colour may be single colour or multiple as per selection. Seating and back rest shall be made-up of Material made from Virgin polymer, Armless Chair, Stainless Steel legsChair shall have IISER Pune Logo/letter engraved on approved location. One sample shall be got approved from Engineer In-charge before mass production. Quoted rate shall including cost of material, labour, GST, lead , lift etc complete. Nothing extra shall be paid seperatly. Approved Make Nilkamal NOVELLA/Steelfab/Godrej

NAME PLATE AND SIGNAGES

Providing and fixing printed in approved single or multi colour sun board signages on 3mm board of lettering/graphisc shall be as issued by IISER Pune and fixing on existing support with two way tape or screwing etc complete.

LOGO'S Providing and fixing weather proof , multicolour, vinyl printer Logo’s of the Facility over the approved colour of ACP base. Logo shall be laser cut woth 5mm thick acrylic sheet and to be printed with approved colours. Acrylic Logo shall be mounted on Approved colour back 4mm Aluminum Composite sheet of any colour and texure. Logo shall be upto 900mmX 900mm size , ACP shall be upto 1000X1000mm size. Quoted rate shall be installtion of logo at approved location at site including scaffolding etc complete.

Providing and fixing weather proof 4mm acrylic laser cut letters of size upto 300mm X 150mm each to be aligned properly over the approved colour ACP base. MOC of wording shall be homogeneous acrylic words of 15 inch height and 12 inch width of artestic desing and font as approved by IISER Pune. Letter shall be sharp design , edges , laser cut to be fixed with epoxy based glue or screwing in order to durability. Quoted rate shall be installtion of logo at approved location at site including scaffolding etc complete.

Providing and fixing Inauguration glass plate of 600mm tall and 750mm long made-up of 8mm glass with vinyl printing of any approved matter/artwork in any colour issued by IISER Pune including logo of Institutes. Glass plate shall be firmed fixed on wall with stainless steel studs on each corner. Quoted rate shall be including cost of material, labour etc complete. Nothing extra payable.

Electrical Work

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of Single poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Make L&T/ Legrand/Schneider/Siemens single pole

Supply, Installation, Testing and Commissioning of 1200 mm sweep,BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC)Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019),THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts,washers, temperature rise=75 degree C (max.), insulation resistancemore than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.

Supply and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required

Supplying LT cable having copper conductor XLPE insulated sheathed,galvanised steel tape armoured cable with pvc outer sheathing 1.1 KV ( Confirming to IS 7098 Part-II amended upto date as per the following sizes). Including the cost of all materials, lobour, Handling of materials of equipment and machineries all lead lift, loading and unloading, transportation, if any other incidental charges at all level complete all as per specification and as directed by Engineer-in charge. 4 Core x 10 Sqmm Armoured Copper Cable.

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. Upto 35 sqmm(clamped with 1 mm thick saddle)

Supplying LT cable having copper conductor PVC insulated Copper flexible cable Including the cost of all materials, lobour, Handling of materials of equipment and machineries all lead lift, loading and unloading, transportation, if any other incidental charges at all level complete all as per specification and as directed by Engineer-in charge. 1 Core x 10 Sqmm Armoured Copper Cable.

END TERMINATION: Supply and installation of End termination of cables with compression brass cable glands, Al crimping type lugs should be used for Al cables and Cu lugs with soldering and ferrules for the following 1.1kv class Al./Cu. XLPE/PVC insulated using necessary crimping tool and all other accessories as required and Including the cost of all materials, lobour, Handling of Materials of equipment and machineries all lead lift, loading and unloading, transportation, if any other incidental charges at all level complete all as per specification and as directed by Engineer-in charge. 1 Core x 10 Sqmm Copper Flexible Cable.

END TERMINATION: Supply and installation of End termination of cables with compression brass cable glands, Al crimping type lugs should be used for Al cables and Cu lugs with soldering and ferrules for the following 1.1kv class Al./Cu. XLPE/PVC insulated using necessary crimping tool and all other accessories as required and Including the cost of all materials, lobour, Handling of Materials of equipment and machineries all lead lift, loading and unloading, transportation, if any other incidental charges at all level complete all as per specification and as directed by Engineer-in charge. 4 Core x 10 Sqmm Armoured Copper Cable.

Supplying and fixing of following ways surface/ recess mounting,vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.):4 way (4 + 12), Double door

Supplying fixing and wiring Current Operated RCBOs,240V/415V 50Hz with 10KA short circuit with standing capacity 25amps. double pole, 30/100mA, and Including the cost of all materials, lobour, HANDLING OF MATERIALS of equipment and machinery all lead lift, loading etc, complete.RCBO 32/40 A 4P, 30mA

PVC RACEWAYS ( Along the wall) DLP U- PVC adaptable trunking : Supply & installation of surface mounted DLP U- PVC adaptable trunking raceways, fabricated out of U-PVC to Off-White or approved shade as per IS 733 of thickness 2.0mm for the base and sides with removable covers, complete with necessary bends, suitable sized junction boxes, internal angle, external angle, flat 90 degree angle , end caps and tees,minor civil works if any etc, Complete. (For every 1mtr distance cable tag has to be provided for each circuit in the raceways - as more that 1C FRLS copper wire is required for 1 Circuit) PVC RACEWAYS ( Along the wall), DLP U- PVC adaptable trunking . Size: 105x 50mm PVC Raceways for Power & Data with above specifications 105x 50mm PVC Raceways

Supplying and fixing following Modular socket on the existing raceways & PVC DLP truncking with required accessories to complete jobs. including connections, as required. . 6 Pin 15/16 amp socket outlet

Supplying and fixing following Modular socket on the existing raceways & PVC DLP truncking with required accessories to complete jobs. including connections, as required. . 3 Pin 05/06 amp socket outlet

Supplying and fixing following Modular switch / socket on the existing raceways & PVC DLP truncking with required accessories to complete jobs. including connections, as requiredincluding connections, as required. . 15/16 amp switch

Supplying and fixing following Modular switch / socket on the existing raceways & PVC DLP truncking with required accessories to complete jobs. including connections, as requiredincluding connections, as required. . 05/06 amp switch

Supplying and fixing following Modular switch / socket on the existing raceways & PVC DLP truncking with required accessories to complete jobs. including connections, as required including connections, as required. . 6 Module Box with faceplate & cover

Supplying and fixing following Modular switch / socket on the existing raceways & PVC DLP truncking with required accessories to complete jobs. including connections, as required including connections, as required. . 4 Module Box with faceplate & cover

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.Group C

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessedmedium class PVC conduit as required 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessedmedium class PVC conduit as required 2 X 4 sq. mm + 1 X 4 sq. mm earth wire

Supplying and fixing TPN sheet steel enclosure on surface/ recess without MCB complete with connections, testing and commissioning etc. as required.

Supplying and fixing following size / modules, GI box along with modular base and cover plate for modular switches in recess etc, as required. ( The job includes cutting & chasing existing wall, fixing the box in position as required including rough plastering.) (In all the rooms, vertical drops of conduits and switch boxes shall be concealed in the wall). Boxes should be of same make as that of modular accessories. :6 Module

Supply of Recessed Mounted 2'X2' , 36 / 40 W LED Luminaire Light with Single piece molded Polycarbonate diffuser, Lighting and electrical parameters are inline with 2'X2' Luminaire.Luminaire should be available in different Lumen Packs of 4000 lm with different CCT.. LED Used shall be SMD type and fixture should have minimum efficacy at System level (Not Chip Level) =100 lumens/watt, Life of fixture 50000hrs@L70% Lumen maintenance, CCT up to 6500, CRI 80, PF 0.95 and SDCM 4 for good light quality, an operating Voltage Range of 140 - 270 V.Minimum Internal Surge Protection 2.5KV The fixture should comply with the parameters as per IS10322. The LED driver should comply to IEC61000-3-2 ed.3.2, 2009 for Harmonics, IEC61347 -2 -13, 2006 in Conjunction with IEC61347-1 ed.2.0, 2007 for Electrical Safety, IEC62384 ed.1.1, 2011 for performance and IEC61547 ed.2.0, 2009, CISPR-15 for EMI. Make Wipro / Crompton / Havell / Bajaj

ERECTION for Recessed Mounted 2'X2' , 36 / 40 W LED Luminaire incluilding ceiling hook, drop wires 3 R x 1.5 sqmm copper flex wire from ceiling point to fitting with full covered flex pipe, stray wire / cable for handing fitting on false ceiling or mouting on ceiling with surface box assembly etc as required and complete. Cutting in metal / false ceiling for required cut out is in scope of agency.

Supply of Recessed Mounted 12/15 watt LED Luminaire round dia 135/160 mm cut out type with Single piece molded Polycarbonate diffuser, Lighting and electrical parameters .Luminaire should be available in different Lumen Packs of 1200 lm with different CCT, maximum system wattage of 12 W, LED Used shall be SMD type and fixture should have minimum efficacy at System level (Not Chip Level) =100lumens/watt, Life of fixture 50000hrs@L70% Lumen maintenance, CCT up to 6500, CRI 80, PF 0.95 and SDCM 4 for good light quality, an operating Voltage Range of 140 - 270 V.Minimum Internal Surge Protection 2.5KV The fixture should comply with the parameters as per IS10322. The LED driver should comply to IEC61000-3-2 ed.3.2, 2009 for Harmonics, IEC61347 -2 -13, 2006 in Conjunction with IEC61347-1 ed.2.0, 2007 for Electrical Safety, IEC62384 ed.1.1, 2011 for performance and IEC61547 ed.2.0, 2009, CISPR-15 for EMI. Make Wipro / Crompton / Havell / Bajaj / syska

ERECTION for Recessed Mounted 12/15 watt LED Luminaire round/squre dia 135/160 mm cut out type incluilding ceiling hook, drop wires 3 R x 1.5 sqmm copper flex wire from ceiling point to fitting with full covered flex pipe, stray wire / cable for handing fitting on false ceiling or mouting on ceiling with surface box assembly etc as required and complete. Cutting in metal / false ceiling for required cut out is in scope of agency.

Supply,installation,testing and commissioning of LED stip Polycarbonate material minimum no of LED: 50 LED/meter,CCT upto 6500, 12 Volts,minimum 5 Watt/Meter, width 0.01 Meters with required addaptor,wiring and required accessories to complete the job..Make- Wipro/Philips/Cromptron

Supply,installation,testing and commissioning of Decorative Cool Day Down focus Light White Polycarbonate material 230 Volt 6/9 watt LED with mounting arrangement of angular bracket powder coated and slink design indooe type with all required accessories as complete.Make- Wipro/Philips/Cromptron

Supply,Installation,testing,commissioning of fan rod upto 2 meter with required accessories to complete the job.

CCTV System

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required. 1 run of cable

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required ( for Data cable ) 25 MM

Providing end termination of existing CAT 6 cable with RJ45 and accessories for CCTV Camera as complete

Supply,installation,testing and commissioning of 4 Mega Pixel IP Dome Camera having Image Sensor 1/3" progressive scan CMOS Min. Day & Night IR ,Focus Fixed,IR Wavelength 850 nm, IR Range Up to 30 m, Video-Max. Resolution 2560 × 1440,Main stream: H.265/H.264, Sub-stream: H.265/H.264/MJPEG, Open Network Video Interface, Plug-in required live view: IE 10+,Plug-in free live view: Chrome 57.0+, Firefox 52.0+,Local service: Chrome 57.0+, Firefox 52.0+,Day/Night Switch Auto, Ethernet Interface 1 RJ45 10 M/100 M Interface, self-adaptive Ethernet port, Built-in Microphone, Hardware Reset,12 VDC Power Supply , Protection IP67.Replacing item with older should be compatible with existing system.(The faulty spares and its accessories will be return to IISER Pune and belongs to IISER Pune).Any tools and tackle etc required for replacement is in scope of agency.Make of Camera:CP Plus/HikVisison/Honeywell.

Supply,installation,testing and commissioning of 08 port POE Switch with Module ,08 x PoE+ Gigabit ports with minimum 120 W PoE budget ,2 dedicated Gigabit SFP fiber uplink ports,Gigabit Ethernet RJ-45 Copper ports (10M/100M/1G),PoE / PoE+ ports,Gigabit SFP (fiber) ports (100M/1G) , Internal Power Supply,Front (per device) Power (with Cloud Mode Indicator), Fan, PoE Max, LED Mode,Front (per port) Speed/Link/Activity/PoE Status.Replacing item with older should be compatible with existing system.(The faulty spares and its accessories will be return to IISER Pune and belongs to IISER Pune).Any tools and tackle etc required for replacement is in scope of agency. Make:Netgear/Hikvision/D-Link/tp-Link

Supply,installation,testing and commissioning of 08 port NVR Video Compression : Standard H.265, H.264 Network ,2-way Audio | Local Output : 2 SATA, upto 6 TB per SATA,Backup mode : USB Device, Network Ethernet : RJ45 10 / 100 / 1000 Mbps × 1USB Port USB 2.0 x 2.Make:CP plus/Hikvision/Honeywell. Quoted rate shall be including cost of minimum 17'' Wall/fllor mounted LED moniter. Quoted rate shall be including cost GST installation etc.

Supply,installation,testing and commissioningof 4 TB survillance hard disk with required all accessaries. Replacing item with older should be compatible with existing system.(The faulty spares and its accessories will be return to IISER Pune and belongs to IISER Pune).Any tools and tackle etc required for replacement is in scope of agency.Make: WD Purple/Toshiba/Seagate

Supply,installation,testing and commissioning of 6 U Network rack with its mounting locking from front side.

Supply, Installation, Testing and Commissioning of OFFLINE UPS,230V,Output Frequency (sync to mains) : 47 - 63 Hz,Minimum Three Battery Backed up and Surge Protected 6A, 2/3 Pin Output Indian Power Socket,with inbuilt 1x7.2 Ah Battery with required accessories to complete the job. Make: Microtek/APC/Luminous

Wiring for circuit/ submain wiring alongwith earth wire with then following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required:4 X 6 sq. mm + 2 X 6 sq. mm earth wire

Supply installation testing and commissioning of Energy Meter(Three Phase) 415 Volt into existing panel/enclosure box with numbering and termination of wire with lugs etc with required accessories.Coordination with MSEDCL authorities for submission of reports and required permission to complete the job if requires is in the scopy of agency.Any document required will be arrange by IISER Pune

Supply & installation of metering box with powder coated suitable for 3 phase meter with RCBO TP 30mA/32 A

Fire Extinguisher

Supply installation testing and commissioning of ABC dry powder type fire extinguisher ball capacity minimum 1.3kg (Make: Safex/Safety Plus/Ceasefire)

Supply installation testing and commissioning of CO2 cylinder of capacity 4.5 Kg with Hose & mounting accessoies with fully charge condition.(Make: Safex/Safety Plus/Ceasefire)

Supply installation testing and commissioning of ABC dry powder type fire extinguisher having capacity minimum 4.5kg with inbuild pressure gauge mounted on cylinder (Make: Safex/Safety Plus/Ceasefire)