Gondwana University Tender

T.V. UNIT 1500W*400D*540H

KING BED WITH 3/4TH LIFT ON STORAGE - FUMED OAK (WOODPORE) Size1920(W) X2180(L) X 900(H) It has a 3/4th lift on storage HeadBoard Head board is made up of 150mm thick woodpore prelam partical board. Size of headboard is 1920(w) X 900(H). It has a decorative headboard panel of 8mm thick with PVC foll on finish side and flat laminate on semifinish side. It has 0.8mm thick lipping on all sides. RH & LH siderall It consist of 30(15+15)mm thick prelam partical board with 1.5mm lipping of size 2000(W) X 355(H) FootBoard-It is made up of 30(15+15)mm thick prelam partical board with 1.5mm lipping of size 1894(W) X 375(H) It has a 15mm thick spacer for plank support with 0.8mm lipping of size 640(W) X 100(H) Top plank spacer made with 12mm thick woodpore prelam partical board with 0.8mm lipping and size 1828(W) X 35(H). It has Nylon strap handle of size 390X50X1,5mm black colour should be tied with top plank

BED SIDE TABLE-FUMED OAK (WOODPORE) Size-450(W) X 400(D) X 450(H) It consist of 1 drawer and 1 dummy panel. Top panel is of size 390(W) X 380(H) with 18mm thick woodpore prelam partical board. Bottom panel is of size 390(W) X 383(H) with 15mm thick woodpore prelam partical board. LH and RH side is of size 400(W) X 450(H) with 30mm thick woodpore prelam partical board. Skirting is of size 390(W) X 50(H) with 15mm thick woodpore prelam partical board. All having 0.8mm thick lipping.

3 DR WARDROBE-FUMED OAK (WOODPORE) Size-1352(W) X 530(D) X 2030(H) It is having decorative profile on shutters. Top Assembly is made of 30 (9+12+9)mm thick woodpore prelam partical board with 1.5mm thick lipping on all sides. Size of top assembly is 1352(W) X 530(D). It is having 1 drawer storage and 1 locker and 9 compartments. Back panel made of 9mm thick woodpore prelam partcal board. Skirting & Dummy skirting is made of 15mm thick woodpore prelam partical board with 0.8mm thick lipping. It is of size 1320(W) X 75(D) It is having 160 CD aluminium H-67 anodised handle.

T.V. UNIT 1500W*400D*540H

DRESSER UNIT 702W*400D*1749H

DESKING OFFICE TABLE 1200(W) X 600(D) X 750(H) Office table with robust structure and good stability with levelling adjustment to adjust with the uneven floor surface. TOP: 30mm thick table top made up of 18mm thick pre-laminated particle board with 12mm thick thin PVC foil wrapped decorative profile made up of MDF fixed along all the edges from the bottom side which provide decorative waterfall edge profile to top with twin colour look the decorative trim to be connected at the angle of 45 Degree with each other. M.S. T-Hat of 0.8mm thickness is provided for extra support for the top of length 1200mm and above. LEG: 25mm thick Leg or gable end made up of 25mm thick pre-laminated particle board with M.S. leveler bracket to give floating look. MODESTY: Modesty panel made up of 18mm thick pre-laminated particle board providing stability to structure and allow sufficient leg privacy to the user. "D" headed decorative aluminium profile fixed on it, the aluminium profile to be fixed by making grove in the panel for better fixing and integrated look

3 SEATER SOFA Size-940 X 860 X 900 SEAT FOAM: The seat is made of PU foam with Density 28: 2 kg/cu.mtr having an additional top layer of super soft PU foam in Density 322 kg/cu. upholstered with fabric or leatherette. BACK FOAM: The back is made of PU foam with Density 28 2 kg/cu. mtr with two additional top layer of supersoft foam of density 32+2 kg/cu. mtr, upholstered with fabric or leatherette. UNDERSTRUCTRE: Understructure is made up of 1.2.0.1 cm, thick hot pressed plywood ( moisture resistance & termite proof as per IS: 303) & pinewood of cross section devoid of major knots & surface defects 6 nos, per seat & 3.8 mm Dia zigzag spring assembly is mounted over understructure for cushioning purpose 6 nos, per seat & 3.8 mm Dia zigzag spring assembly is mounted over understructure for cushioning purpose. LEG ASSEMBLY: It is made up of Solid wood in square shape of size 40x40mm. (L) 940MM X (D) 860MMX (H1900 mm seat (H) 450 mm

2 SEATER SOFA Size-1550 X 860 X 900 SEAT FOAM: The seat is made of PU foam with Density 28: 2 kg/cu.mtr having an additional top layer of super soft PU foam in Density 322 kg/cu. upholstered with fabric or leatherette. BACK FOAM: The back is made of PU foam with Density 28 2 kg/cu. mtr with two additional top Inyer of supersoft foam of density 32.2 kg/cu, mtr, upholstered with fabric or leatherette UNDERSTRUCTRE:Understructure is made up of 1.2.0.1 cm, thick hot pressed plywood ( moisture resistance & termite proof as per IS: 303) & pinewood of cross section devoid of major knots & surface defects 6 nos, per seat & 3.8 mm Dia zigzag spring assembly is mounted over understructure for cushioning purpose 6 nos, per seat & 3.8 mm Dia zigzag spring assembly is mounted over understructure for cushioning purpose. LEG ASSEMBLY: It is made up of Solid wood in square shape of size 40x40mm. (L) 1550MM X (D) 860MM X (H) 900 mm seat (H) 450 mm

CENTRE TABLE 800*400*420 MM

Side Table Size: 400 x 350 x 400mm 10 the top, top support panel, bottom panel and the corner shape leg made up of 12mm thick prelaminated particle board. All the expoed edges shall be sealeswith 2mm thik PVC edgeband and non exposed edges with 0.8mm thick PVC edge band with help of hot melt glue.

CAFETERIA REC TBL-1500(W) X 900(D) X 750(H)-6 STR (W/O CHAIRS) Cafeteria table with metal structure and good stability with leveling adjustment to adjust with uneven floor surface TOP-Tabletop made up of 36mm MDF PVC folled with balancing laminate on the lower side. UNDERSTRUCTURE:- Understructure is made up of M.S. Pipe supported with specially designed casted connecting blocks to connect cross members le horizontal pipe with legs le vertical members. Vertical members are made up of M.S. square pipe 50X50X1.6MM thick and all horizontal Members are made up of M.S. square pipe 50X25X1.2MM thick. Understructure is powder-coated through 7 tank process. Provision of designer moulded leveller and leg caps. Colours available are Tomato Red, Green, Orange colour.

CHAIR Body made up of Glass Flied PP Compund, Epidium Leg Bushes to Avoid Scratches on Delicate Floor Capable to take 200 Kg Wait of Vertical Load, Scratch Resistence

CAFETERIA REC TBL-900(W) X 900(D) X 750(H)-4STR (W/O CHAIRS) Cafeteria table with metal structure and good stability with leveling adjustment to adjust with uneven floor surface TOP:- Tabletop made up of 36mm MDF PVC foiled with balancing laminate on the lower side. UNDERSTRUCTURE:- Understructure is made up of M.S. Pipe supported with specially designed casted connecting blocks to connect cross members ie horizontal pipe with legs ie vertical horizontal members. Vertical members are made up of M.S. square pipe 50X50X1.6MM thick and all horiz Members are made up of M.S. square pipe 50X25X1.2MM thick. Understructure is powder-coated through 7 tank process. Provision of designer moulded leveller and leg caps. Colours available are Tomato Red, Green, Orange colour

CAFETERIA RECTANGULAR TABLE-1800(W) X 900(D) X 750(H) -8 STR (W/O CHAIRS) Cafeteria table with metal structure and good stability with leveling adjustment to adjust with uneven floor surface TOP: Tabletop made up of 36mm MDF PVC foilled with balancing laminate on the lower side. UNDERSTRUCTURE:- Understructure is made up of M.S. Pipe supported with specially designed casted connecting blocks to connect cross members ie horizontal pipe with legs ie vertical members. Vertical members are made up of M.S. square pipe 50X50X1.6MM thick and all horizontal Members are made up of M.S. square pipe 50X25X1.2MM thick. Understructure is powder-coated through 7 tank process. Provision of designer moulded leveller and leg caps. Colours available are Tomato Red, Green, Orange colour.

CHAIR Body made up of Glass Filed PP Compund, Epidium Leg Bushes to Avoid Scratches on Delicate 3 Floor Capable to take 200 Kg Wait of Vertical Load, Scratch Resistence

RECEPTION TABLE 1800W*650D*950H

3 SEATER SOFA Size-2000 X 860X 900 SEAT FOAM: The seat is made of PU foam with Density 28 2 kg/cu.mtr having an additional top layer of super soft PU foam in Density 32 ±2 kg/cu. upholstered with fabric or leatherette, BACK FOAM: The back is made of PU foam with Density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density 32±2 kg/cu. mtr, upholstered with fabric or leatherette. UNDERSTRUCTRE: Understructure is made up of 1.2+0.1 cm. thick hot pressed plywood ( moisture resistance & termite proof as per IS: 303) & pinewood of cross section devoid of major knots & surface defects 6 nos, per seat & 3.8 mm Dia zigzag spring assembly is mounted over understructure for cushioning purpose 6 nos. per seat & 3.8 mm Dia zigzag spring assembly is mounted over understructure for cushioning purpose. LEG ASSEMBLY: It is made up of Solid wood in square shape of size 40x40mm. (L) 2000MM X (D) 860MM X (H) 900 mm seat (H) 450 mm

2 SEATER SOFA Size-1550 X 860 X 900 SEAT FOAM: The seat is made of PU foam with Density 28± 2 kg/cu.mtr having an additional top layer of super soft PU foam in Density 32 ±2 kg/cu. upholstered with fabric or leatherette. BACK FOAM: The back is made of PU foam with Density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density 32±2 kg/cu. mtr, upholstered with fabric or leatherette, UNDERSTRUCTRE: Understructure is made up of 1.2±0.1 cm. thick hot pressed plywood ( moisture resistance & termite proof as per IS: 303) & pinewood of cross section devoid of major knots & surface defects 6 nos, per seat & 3.8 mm Dia zigzag spring assembly is mounted over understructure for cushioning purpose 6 nos, per 'seat & 3.8 mm Dia zigzag spring assembly is mounted over understructure for cushioning purpose. LEG ASSEMBLY: It is made up of Solid wood in square shape of size 40x40mm. (L) 1550MM X (D) 860MM X (H) 900 mm seat (H) 450 mm

SIDE TABLE Size: 400 x 350 x 400mm the top, top support panel, bottom panel and the corner shape leg made up of 12mm thick prelaminated particleboard. All the expoed edges shall be seales with 2mm thik PVC edge band and non exposed edges with 0.8mm thick PVC edge band with help of hot melt glue.

CENTRE TABLE 800*400*420 MM

CHAIR The seat and back shall be made up of 12 ±1mm. thick hot-pressed plywood and upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam shall be designed with contoured lumbar support for extra comfort. The seat shall be extra thick foam on front edge to give comfort to popliteal area. The dimensions of back shall be 475 mm(W) x 580 mm(H) and of seat shall be 470 mm (W) x 480 mm (D). The HR polyurethane foam shall be moulded with density= 45+2 kg/m3 and hardness load 16 ± 2 kgf as, per IS:7888 for 25% compression. The one-piece armrests shall be injection moulded from black Co.polymer Polypropylene. Overall Dimensions of Chair shall be Seat Height-465mm, Height-895mm, Width & Depth of Chair as measured from pedestal- Width-614 mm and Depth-645 mm.

The feature of this Seat should be as follows, front desk should be foldable so that there is a sufficient room to have for movement. Front desk to have water bottle holder in-built in it. Seate should be with tip-up facility and Arms also need to be foldable type, each person will have 2 separate arms. It should be property and perfectly grouted to the floor by using anchor bolts and necessary fitting to be provided with no loose movement & shaking. Structure: A metal leg made up of MS rectangular pipe of 80mm x 40 x 2mm thickness with base of box type made up of CRCA sheet 2mm thickness. Cross members: Cross members made up of MS rectangular pipe of 60mm x 40 x 2mm thicknes and MS square pipe of 25mm x 25mm x 1.6mm thickness. Work surface: Work surface top to be kind of tip up with depth of 350mm made up of 18mm pre-laminated particle board with 2mm thick PVC edge banded all across. Seat: Seat should have a Tip-up mechanism and be made up of 18mm thickness BWP Plywood size 470mm x 400mm with fabric upholstery having polyurethane foam of density 50 +/-5 kg/m3, Fabric color as per customer requirement. Back Back should have a 12mm BWP Plywood with fabric upholstery having polyurethane foam of density 48 +/- 5 kg/m3, Fabric color as per customer requirement Bottle Holder: Bottle holder should be of CRCA sheet that is attached on the end legs. Configuration of Seating: Seating configuration should be based on layout design Le. it may be 2 Seater or 3 Seater etc. As per university requirements.