Gondwana University Tender

Supplying and installing G.I. pipe above ground of ‘C’ class ERW of size 150 mm dia with necessary fitting and heavy duty clamp as per specification NO. FF-PP

Excavating hard Rock or bituminous road by chiselling for preparing pit for pole / stay/earth plate / for laying cable/ pipe &clearing the site by removing debris & making the site as required complete.

Excavating hard murum / metal road by chiselling for preparing pit for poles stay or earth plates or for laying cables, pipes & clearing the site by removing debris & making the site as required complete.

Excavating soft murum / soft soil road by chiselling for preparing pit for poles stay or earth plates or for laying cables, pipes & clearing the site by removing debris & making the site good complete.

Providing coating of bitumen Paint & 4mm thick Wrapping as per IS 10221 for underground 100 mm Ring Main of Fire Fighting System.

Supplying & installing cast iron double flange butterfly valve of size 75/80 mm dia. As per specification No. FF-VL/BFV

Supplying & installing cast iron double flange butterfly valve of size 100 mm dia. As per specification No. FF-VL/BFV.

Supplying and installing double flange NRV of size 100 mm dia as per specification No. FF-VL/NRV.

Supplying and installing wall mounting swinging Hose reel drum fitted with 19 mm dia. 30 m high pressure polypropylene (polyhouse) long fitted with necessary complete as per specification No. FF-FFA/HV.

Supplying & erecting gun metal chrome plated nozzle, 19 mm dia complete as per specification no. FF-FFA/NZ

Supplying and installing fire brigade header (Siamese Connection) of 150 mm dia for supplying water to wet riser system as per specification No. FF-FFA/SMC.

Supplying and erecting 25mm dia G.M. air release cock, with necessary G.I. coupling to be fitted on top of air vessel or on wet riser as per specification No. FF-FFA/ARV.

Supplying and erecting M.S./CRCA cabinet for housing Fire Brigade / SIEMESE connections (size 1250 x 400 x 300 mm.) made from 16 SWG sheet and angle iron 25 mm. x 25 mm. x 4 mm. having front doors with viewing glass (8" x 6") and locking arrangement with necessary fixing material such as rubber bidding etc. duly painted in post box red colour

Supplying & erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kg. capacity cartridge type conform to IS 2878 /15683 complete erected with necessary clamp made from 50 x 6 mm. M. S. flat with nut & bolts grouted in wall complete

Supplying and erecting ABC powder type fire extinguisher as per IS : 13849 /15683 of 6 kg capacity with necessary clamp for erection on wall.

Supplying and erecting D.C.P. type fire extinguisher 6 kg capacity cartridge type with gun metal cap 150 gram CO2 gas cartridge, powder and brackets conforming to IS 2171-1985/ IS 15683 and complete erected with necessary clamps made from 50x6 mm M.S. flat with nuts & bolts grouted in wall complete.

Supplying, installing, testing and commissioning with perfect aligning, proper levelling of booster pump of 450 LPM at 35 m head 7.5 HP (5.5 KW), 3 phase, 415 volt, 50Hz or of suitable HP with suitable stages as per specification no. FF-MFP/BP

Supplying and erecting 100 mm dia end line strainer for positive suction complete as per specification no. FF-VL/ELS.

Supplying & erecting automatic control panel for 3 Ph, 415 volt, A.c.Submersible/centrifugal pump set upto 10 HP consisting of Star Delta starter having relay range 6-10 Amp, S.P.P., Combined ammeter/ voltmeter, phase indicating lamp enclosed in CRCA powder coated Vibration proof enclosure with IP 54 protection. Control Panel should offer single phasing, phase reversal, phase imbalance etc.

Supply, laying testing and commissioning of ON OFF push button unit.

Supplying, erecting & terminating XLPE armoured cable 3 core 2.5 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU.

Supplying and installing pressure switch with 12/15 mm dia isolation valve, G.I. nipple, elbow, etc complete as per specification no. FF-FFA/PS

Supplying and installing pressure gauge of 100 mm dia., 0- 300 PSI or 0-14 kg per cm square fitted with 12/15 mm dia. pad cock valve, and G.I. pipe, elbow etc. complete as per specification no. FF-FFA/PG

SSITC of Electric Traction Passenger cum Stretcher/Hospital Lift with • Rated capacity :- 15 Passenger/1020Kg • Floors :- G+2 floor (3Stops/3 Landings) • Travel :- 6 to 8.4 mtrs • Location of Lift Machine:- MR/MRL [applicable for Passenger Lift with MRL only & Stretcher/Hospital Lift with MR & MRL] • Rated speed :- 1.0mps VS • Doors type :- COPO/TOPO Doors with frame having clear opening of 800/900/1000 mm wide x 2000mm high made from SS 304 grade sheet of 1.5mm, thick in hairline finish for car and all landing doors with SS door architraves /frames • Lift car enclosure made from SS 304 grade sheet of 1.5mm, thick with hairline finish with frame made from MS girders, bracing of adequate size with minimum safety factor of 5, with Toe Guard Apron, with necessary false ceiling with adequate LED lights, blower/fan for ventilation & SS chequered plate flooring, handrails, mirror, emergency light etc. • COP with SS face plate having metallic push buttons with Braille Code & luminous indicator around button with FPI, scrolling UP/DN LED indicator & with/without attendant key switch, OWD with audio-visual alarm, VAS in Marathi, Hindi & English with intercom system with telephone instrument in Lift car, LMR & FCC/ground floor • Clear Car size of 1100mm wide x 2200mm deep x 2300mm high • LOP with SS face plate having recess/surface push button box for all landings with scrolling UP/DN LED indicator having metallic push buttons with Braille Code & luminous indicator around button with CPI, Lift car arrival & next travel direction audio-visual indication at all landings • Lift controller based on microprocessor/ PLC with VVVF Drive having closed loop control system, with IBMS compatible having necessary port, control panel duly wired with proper size & strength copper wire for power & control circuit, with provision for addition of floor/ control card & allied accessories control panel having enclosure of 1.5mm CRCA sheet with powder coating with IP54 Protection class • ARD complete with necessary SMF VRLA batteries • Fireman controller having fireman switch at fire Landing, • CCTV surveillance system comprises of 2nos minimum 2.0MP FHD IP based vandal proof Dome camera in lift car & in LMR/inside lift shaft top aimed on Lift machinery & controller

SITC of Electric Traction Passenger Lift with Rated capacity :- 8 Passenger/544Kg • Floors :- G+2 floor (3Stops/3 Landings) • Travel :- 6 to 8.4 mtrs • Location of Lift Machine:- MRL • Rated speed :- 1.0mps VS • Doors type :- COPO/TOPO Doors with frame having clear opening of 800 mm wide x 2000 mm high made from SS 304 grade sheet of 1.5mm, thick in hairline finish for car and all landing doors with SS door architraves/frames • Lift car enclosure made from SS 304 grade sheet of 1.5mm, thick with hairline finish with frame made from MS girders, bracing of adequate size with minimum safety factor of 5, with Toe Guard Apron, with necessary false ceiling with adequate LED lights, blower/fan for ventilation & SS chequered plate flooring, handrails, mirror, emergency light etc. • COP with SS face plate having metallic push buttons with Braille Code & luminous indicator around button with FPI, scrolling UP/DN LED indicator & with/without attendant key switch, OWD with audio-visual alarm, VAS in Marathi, Hindi & English with intercom system with telephone instrument in Lift car, LMR & FCC/ground floor • Clear Car size of 1100 mm wide x 1300 mm deep x .2300 .mm high • LOP with SS face plate having recess/surface push button box for all landings with scrolling UP/DN LED indicator having metallic push buttons with Braille Code & luminous indicator around button with CPI, Lift car arrival & next travel direction audio-visual indication at all landings Lift controller based on microprocessor/ PLC with VVVF Drive having closed loop control system, with IBMS compatible having necessary port, control panel duly wired with proper size & strength copper wire for power & control circuit, with provision for addition of floor/control card & allied accessories control panel having enclosure of 1.5mm CRCA sheet with powder coating with IP54 Protection class • ARD complete with necessary SMF VRLA batteries • Fireman controller having fireman switch at fire Landing, • CCTV surveillance system comprises of 2nos minimum 2.0MP FHD IP based vandal proof Dome camera in lift car & in LMR/inside lift shaft top aimed on Lift machinery & controller with NVR kept in LMR/FCC with HDR data backup for 60 days with 18" FHD TV monitor, to be kept in FCC/LMR as directed by Engineer In Charge. Lift Machine of Gearless PMSM of suitable kW with Traction pulley, OSG, electromagnetic brakes, entire assembly mounted on adequate size girders duly fixed on LMR floor/ shaft walls complete with main/diverter traction sheaves, suspension wire ropes/belts of adequate size & strength. • Other mechanical parts such as 'T' section adequate size guide rails for car & counter weight with brackets fasteners, counter weight frame with necessary blocks, buffers with necessary support arrangement, MS pit ladder etc. erected with necessary steel work • Minor civil work for alteration if any and erection of door frames and accessories, erection buffers, erection of lift machinery, adequate size core cuts if required & scaffolding for erecting guide rails fixing of girders for mounting lift machine etc. complete as per specification no. LFT. Lift shaft available having clear size of 1800mm wide x 2750mm deep, 1800mm Pit depth, 4800mm Overhead.

Supplying, installing, testing and commissioning split type variable speed inverter technology room Air conditioning unit having ISEER minimum 4.50 suitable to operate on 230/415V, 50 cycles, A.C. supply having 1 no. of air handling unit (Mega Split) Hi-wall/ floor mounting type complete with Refrigerants R410 A /R32 and copper condenser at position. 2.5 TR Hi Wall Mounted Split AC Unit

Supplying, installing, testing and commissioning split type variable speed inverter technology room Air conditioning unit having ISEER minimum 4.50 suitable to operate on 230/415V, 50 cycles, A.C. supply having 1 no. of air handling unit (Mega Split) Hi-wall/ floor mounting type complete with Refrigerants R410 A /R32 and copper condenser at position. 2.0 TR Hi Wall Mounted Split AC Unit

REFRIGERATION PIPING & CONTROL/POWER CABLING FOR HI WALL SPLIT UNITS- Excavating hard murum / metal road by chiselling for preparing pit for poles stay or earth plates or for laying cables, pipes & clearing the site by removing debris & making the site as required complete.

Supplying & erecting soft drawn copper pipe suitable for refrigeration system having 22 SWG thickness and inner dia / size 16 mm complete.

Supplying & erecting H.M.S. P.V.C. conduit 25 mm. dia. With necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC.

Supplying & erecting H.M.S. P.V.C. conduit 32 mm. dia. With necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC.

Supply and Installation of Inline type / Cabinet Type Centrifugal Type Exhaust Air Fan Unit complete with centrifugal Fan with motor for maximum speed duty point of Specified CFM comprising of direct drive motor and fan shafts. Necessary starter ( If any required )shall be in scope of HVAC Contract. Power cable will be available up to starter panel. Necessary starter ( If any required )shall be in scope of HVAC Contract. Power cable will be available up to starter panel. 4800 CFM (Exhaust Fan)

Supply and Installation of Inline type / Cabinet Type Centrifugal Type Exhaust Air Fan Unit complete with centrifugal Fan with motor for maximum speed duty point of Specified CFM comprising of direct drive motor and fan shafts. Necessary starter ( If any required )shall be in scope of HVAC Contract. Power cable will be available up to starter panel. Necessary starter ( If any required )shall be in scope of HVAC Contract. Power cable will be available up to starter panel. 4100 CFM (Exhaust Fan)

Supply and installation of GI, Pre fabricated rectangular ducts, complete with MS flanges and bracing (as specified), necessary supports using thread rods (as directed) and anchor bolts, supply air collars, vanes, splitters dampers duly painted of the ducts and as per specification for Air Conditioned Areas; all sheets shall be supplied with Mfr Test Certificates with delivery. 0.63 mm Thick GI ducting

SUPPLY INSTALLATION TESTING AND COMMSSIONING OF DIFFUSERS/ GRILLES AS PER FOLLOWING SCHEDULE Alu. Powder Coated Supply Air Grill with VCD

SUPPLY INSTALLATION TESTING AND COMMSSIONING OF DIFFUSERS/ GRILLES AS PER FOLLOWING SCHEDULE Alu. Powder Coated Return Air Grill without VCD

Under deck Insulation with 50 mm thick Fire Retardant Extruded Polysterene having density of 32 Kg / M3 and thermal resistance of 1.78 M2 K / W

Supplying and erecting iron, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.