Dr Babasaheb Ambedkar Marathwada University Tender

Providing and laying Cast in si tu/ Ready Mix cement concrete M-20 of t rap / grani te / quar tzi te/ gneiss metal for R.C.C. beams and lintels as per detai led designs and drawings or as directed including center ing,formwork, cover blocks, laying/ pumping, compact ionand roughening the sur face i f special finish is to be provided and cur ing etc. complete.(Excluding reinforcement and st ructural steel). wi th fully automat ic micro processor based PLCwi th SCADA enabled reversible Drum Type mixer / concrete Batch mix plant (Pan mixer ) etc. complete. Wi th natural sand/ V.S.I. quali ty Ar t i ficial Sand. Spec. No. Bd.F.6 Page No. 300 and B.7, Page No.38.DSR I.No.896 P.No.186

Providing and laying Cast in si tu/ Ready Mix cement concrete M-20 of t rap / grani te / quar tzi te/ gneiss metal for R.C.C. columns as per detai led designs and drawing or as directed including center ing,formwork, cover blocks, laying/ pumping, compact ion finishing the formed sur faces wi th cement mor tar 1:3 of sufficient minimum thickness to give a smooth and even sur face or roughening i f special finish is to be provided and cur ing etc. complete,(Excluding reinforcement and st ructural steel).wi th fully automat ic micro processor based PLC wi th SCADA enabled reversible Drum Type mixer / concrete Batch mix plant (Pan mixer ) etc. complete. Wi th natural sand/ V.S.I. quali ty Ar t i ficial Sand. Spec. No. : Bd.F.5 Page No. 300 and B.7, Page.No. 38.DSR I.No.877 P.No.183

Providing and fixing in position TMT - FE - 500 bar reinforcement of var ious diameters for R.C.C. pile caps, foot ings, foundat ions, slabs,beams columns, canopies, staircase, newels, chajjas, lintels pardis,copings, fins, arches etc. as per detai led designs, drawings and schedules. including cut t ing, bending, hooking the bars, binding wi th wires or tack welding and suppor t ing as required complete.. Spec. No. : Bd.F. 17 Page No. 306.DSR I.No.958 P.No.196

Providing fly ash br ick masonry wi th convent ional / I.S. type fly ash br icks in C.M. 1:6 in foundat ion and plinth including bai ling out water manually st r iking joints, racking out joints water ing and scaffolding etc. complete.. Spec. No.As director by engineer in charge and BDG- 2 and 5.DSR I.No.1053 P.No.211

Filling in plinth and floors with contractor's soil, sand or murum in 15 cm to 20 cm. layers including watering and compaction etc. complete. Spec. No. Bd.A. 11 Page No. 263..DSR I.No.749 P.No.157

Providing soling using 80 mm size t rap metal in 15 cm. layer including fi lling voids wi th Crushed sand/ gr i t , ramming, water ing etc. complete. Spec. No. As directed by Engineer in charge.DSR I.No.752 P.No.157

Providing and fixing welded mesh of 11 gauge wires having mesh size 50 mm x 25 mm including M.SAngle frame of size 35 mm x 35 mm x5 mm in posi t ion wi th oi l paint ing 3 coats etc. complete. Spec. No. :As directed by Engineer in charge..DSR I.No.1448 P.No.272

Providing sand faced plaster externally in cement mor tar using approved screened sand, in all posi t ions including base coat of 15 mm thick in cement mor tar 1:4 using waterproofing compound at 1 kg per cement bag cur ing the same for not less than 2 days and keeping the sur face of the base coat rough to receive the sand faced t reatment 6 to 8 mm thick in cement mor tar 1:4 finishing the sur face by taking out grains and cur ing for four teen days scaffolding etc.complete.. Spec. No. : Bd. L. 7 Page No. 367.DSR I.No.1131 P.No.222

Providing and applying three coats of water proof cement paint of approved manufacture and of approved colour to new plastered sur faces including scaffolding i f necessary, cleaning and prepar ing the sur face, water ing for two days etc. complete..Spec. No. : As directed by Engineer in charge.. DSR I.No.1263 P.No.238

Providing and applying priming coat on concrete/ masonary/Asbestos Cement plastered sur faces including scaffolding i f necessary,prepar ing the sur face by thoroughly cleaning oi l, grease, dir t and other foreign mat ter and sand paper ing as required etc. complete. Spec. No. : As directed by Engineer in charge..DSR I.No.388 P.No.122

Providing and applying two coats of exter ior acraylic emulsion paint confirming to cor responding I.S. of approved manufacture and of approved colour to the plastered sur faces including cleaning ,prepar ing the plaster sur face, applying pr imer coat ,scaffolding i f necessary , and water ing the sur face for two days etc complete. complete.Spec. No. : As directed by Engineer in charge.. DSR I.No.1273 P.No.239

Providing and fixing board displaying informat ion, such as 'Name of work, Tender cost , Name of Cont ractor , Work complet ion and liabi li ty per iod etc', having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mi ld steel sheet painted wi th one coat of Zinc chromate stoving pr imer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. wi th approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame wi th proper ly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted wi th alternate black and whi te bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavat ion, refi lling, t ranspor tat ion, and labour etc complete. Spec. No.MORTH 801.DSR I.No.295 P.No.87

Providing and fabricat ing structural steel work in rolled sect ions like joists, channels, angles, tees etc. as per detai led design and drawings or as directed including cut t ing, fabr icat ing, hoist ing, erect ing, fixing in posi t ion making r iveted / bolted / welded connect ions wi thout connect ing plates, braces etc. and including one coat of ant icor rosive paint and over i t two coats of oi l paint ing of approved quali ty and shade etc. complete.. Spec. No. Bd.C.2 Page No. 275.DSR I.No.816 P.No.174

Providing, fabr icat ing and erect ing at si te of work the tubular steel st ructure (shed) as per standard design and speci ficat ions having var ious spans in between t russes and in mult iples of standard length of bays as speci fied as per standard speci ficat ions, inclusive of cost of steel tubular t russes, tubular columns pur lins, t ie runners, foundat ion bolts, base plates, nuts and bolts, welding wherever required etc. as per detai led drawing inclusive of one coat of ant icor rosive paint and two coats of oi l paint ing of approved quali ty and shade etc. complete.Spec. No. : As directed by Engineer -in-charge.. Spec. No. B-18 Page No. 78.DSR I.No.822 P.No.175

Royalty Charges-as per statement attached

Quality Control Charges Items for All Allied estimates

Carrying out basic tests on cement for standard consistancy,Fineness,Specific gravity,Setting time (Initial and Final), Compressive trength,Soundness.Spec.No.As directed by Engineer in Charge.DSR I.No.1 P.No.386

Carrying out basic tests on Concrete for Mix design.Spec.No.As directed by Engineer in Charge.DSR I.No.21 P.No.387.

Carrying out basic tests on Concrete cubes for compressive strength.Spec.No.As directed by Engineer in Charge.DSR I.No.20 P.No.387

Carrying out basic tests on T.M.T.Steel (Anti corrosive test) for resistance to applied voltage,.Spec.No.As directed by Engineer in Charge.DSR I.No.77 P.No.390.

Carrying out basic tests on T.M.T.Steel (Anti corrosive test) for thickness of coating.Spec.No.As directed by Engineer in Charge.DSR I.No.78 P.No.390

Carrying out basic tests on T.M.T.Steel (Anti corrosive test) for chemical resistance.Spec.No.As directed by Engineer in Charge.DSR I.No.79 P.No.390

Carrying out basic tests on T.M.T.Steel (Anti corrosive test) for hardness of coating.Spec.No.As directed by Engineer in Charge.DSR I.No.80 P.No.390

Carrying out basic tests on T.M.T.Steel (Anti corrosive test) for Salt spray test.Spec.No.As directed by Engineer in Charge.DSR I.No.81 P.No.390

Carrying out basic tests on T.M.T.Steel (Bar testing above 16 mm) for Tensile strength,% Elongation,Yield stress,Weight /m,Bend/rebend test.proof test.Spec.No.As directed by Engineer in Charge.DSR I.No.83 P.No.391

Carrying out basic tests on T.M.T.Steel (Bar testing upto 16 mm) for Tensile strength,% Elongation,Yield stress,Weight /m,Bend/rebend test.proof test.Spec.No.As directed by Engineer in Charge.DSR I.No.82 P.No.391