Directorate Of Sports And Youth Services Tender
Search from over 12139+ business opportunities that have been announced from the biggest Mahatenders, e tender Maharashtra, Maharashtra government tenders, and the Online Tender Notices posted on Maharashtra e tenders till date. Find opportunities that have come in from the multiple corporations, Maharashtra government departments, State PSUs, and Private companies from the state.
Directorate Of Sports And Youth Services Tender
Eprocure
Opening Date13 Nov 2020
Closing Date27 Nov 2020
Tender AmountRefer Documents
Costs
EMD
₹ 70,000Document Cost
₹ 4,200Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2020_DSYSP_623491_1Bid Award Id
ViewTender No
TENDER NO 2 20-21Tender Authority
Directorate Of Sports And Youth Services ViewPurchaser Address
-Website
http://mahatenders.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
WRIST CONDITIONER
1
-
-
... More
PREACHER CURL MACHINE
1
-
-
... More
LAT PULL DOWN
1
-
-
... More
ROWING PULLEY
1
-
-
... More
CHEST PRESS
1
-
-
... More
MULTI FUNCTIONAL TRAINER
1
-
-
... More
PEC FLY WITH REAR DELT
1
-
-
... More
SHOULDER PRESS
1
-
-
... More
STANDING CALF MACHINE
1
-
-
... More
INCLINE LEG PRESS
1
-
-
... More
LEG EXTENSION AND LEG CURL COMBO
1
-
-
... More
HACK MACHINE
1
-
-
... More
MULTI HIP
1
-
-
... More
ABDOMEN CRUNCH
1
-
-
... More
ASSISTED CHIN-UP
1
-
-
... More
HYPER EXTENSION
1
-
-
... More
BENT OVER ROWER (T BAR]
1
-
-
... More
BENCH PRESS BENCH
1
-
-
... More
INCLINE BENCH
1
-
-
... More
DECLINE BENCH
1
-
-
... More
ADJUSTABLE BENCH
1
-
-
... More
DUAL AXIS INCLINE PRESS
1
-
-
... More
DUAL AXIS BENCH PRESS
1
-
-
... More
DUAL AXIS DECLINE PRESS
1
-
-
... More
45 DEGREE LEG PRESS
1
-
-
... More
ABDOMEN BENCH
1
-
-
... More
VERTICAL KNEE RAISER
1
-
-
... More
TWISTER
1
-
-
... More
3-DIMENSIONAL SMITH MACHINE
1
-
-
... More
PUSHUP STAND
1
-
-
... More
PLAIN BENCH
1
-
-
... More
SMITH BENCH
1
-
-
... More
RACK FOR 20 DUMBELLS WITH BAR RACK
1
-
-
... More
ARC DUMBELL RACK
1
-
-
... More
WEIGHT PLATE TREE RACK
1
-
-
... More
ABDOMEN BOARD WITH LADDER
1
-
-
... More
DOUBLE TWISTER
1
-
-
... More
SEATED CALF BENCH
1
-
-
... More
Shoulder Press (Free Weight):
Dimensions: (L X W X H) 1300X1260X1350mm.
Main Frame: 114x3 mm thick M.S pipe and subordinate tube is of 88x3.0 large thickness M.S pipe.
Handle: is made of 88 x3 mm thick Pipe and 25 mm round M.S bright bar in bending design.
All remaining frame is made by 88x3mm thick MS pipe.
Weight plates: Rubberized moulding round weight plates are used.
Weight Plates Holder with spring lock and spare weights holder: is made by hard chrome plated mild steel 48 DIA pipe open front covered with half round cap and holder end is covered with heavy quality rubber ring of OD-68 mm and ID-48 mm with 10mm wall thickness for free weight noiseless operations.
Bearing: Lubricated high grade6305 '2RS'steel ball bearing.
Base plate: is OD166, ID 116, and 6 mm thick.
Pins: are made up of M.S bright bar.
Bearing bushes: 75mm OD seamless pipe.
Weight plate mounting pipe is of 048 mm MS pipe.
Padding and Cushion; Seats and pads are made up of 3 mm thick M.S plate with 2" inches of high-density foam and finally covered with completely stitched heavy vinyl cover in any color.
Seat Frame: made up of hard chrome plated mild steel 048 DIA round pipe.
Hardware: All hardware's uses button heads bolts and nuts made up of high tensile steel.
Hand grips: Hand grips is used on handles wherever necessary made up of high-quality rubber and handle ends are covered with aluminum/pp/nylon caps with grub screw for long endurance.
Spring knob: mechanism is used for seat height adjustment.
Closing caps: are of PP/NYLON/HDPE material.
Laser cutting: profiles of 6mm and 4mm thick M.S sheet are used for connecting subordinates with each other.
Rubber: Safety base pads: Anti-skid safety base pads made up superior rubber to prevent slippery and damage to floor. Heavy duty 20mm thick rubber pads are placed for resting handles for noise less operations.
Powders Coating: All components are chemically treated to seal exterior and interior surfaces against corrosion. The components are electro statically powder coated at minimum 80-100-micron thickness to make it resistant to scratch, corrosion and humidity in dual color combination.
Safety Instructions and Exercise chart on machine - start & finish position chart stick on 5mmthick mild steel plate.
1
-
-
... More
Front Pull Down (Free Weight):
Dimensions: (L X W X H) 1230X1120X1860mm.
Main Frame: 114 x3 mm thick M.S pipe and subordinate tube is of 88x3.0 large thickness M.S pipe. Handle frame shall be made using bending design.
Handle: is made of 88x3 mm thick Pipe and 25 mm round M.S bright bar in bending.
All remaining frame is made by 088 x3mm thick MS pipe.
Weight plates: Rubberized moulding round weight plates are used.
Weight Plates Holder with spring lock and spare weights holder: is made by hard chrome plated mild steel 48 DIA pipe open front covered with half round cap and holder end is covered with heavy quality rubber ring of OD-68 mm and ID-48 mm with 10mm wall thickness for free weight noiseless operations.
Bearing: Lubricated high grade 6305 '2RS‘ steel ball bearing.
Base plate Base plate is OD 166, ID 116, and 6 mm thick.
Pins: Made up of M.S bright bar.
Bearing bushes:- 75mm OD seamless pipe.
Padding and Cushion; Seats and pads are made up of 3 mm thick M.S plate with 2" inches of high-density foam and finally covered with completely stitched heavy vinyl cover in any color.
Foam Roller; Foam roller made up of high density composed foam and covered with stitched heavy vinyl cover, and their ends are covered with aluminum or mild steel chrome plated caps and M8 Allen bolt.
Hardware: All hardware's uses button heads bolts and nuts made up of high tensile steel.
Hand grips: Hand grips is used on handles wherever necessary made up of high-quality rubber and handle ends are covered with aluminum/pp/nylon caps with grub screw for long endurance.
Spring knob: Mechanism is used for seat height adjustment.
Closing caps: All open ends should close using closing caps of PP/NYLON/HDPE material.
Laser cutting: Laser cutting profiles of 6mm and 4mm thick M. S sheet are used for connecting subordinates with each other.
Rubber: Safety base pads: Anti-skid safety base pads made up superior rubber to prevent slippery and damage to floor. Heavy duty 20mm thick rubber pads are placed for resting handles for noise less operations.
Powders Coating: All components are chemically treated to seal exterior and interior surfaces against corrosion. The components are electro statically powder coated at minimum 80-100-micron thickness to make it resistant to scratch, corrosion and humidity in dual color combination. Safety Instructions and Exercise chart on machine - start & finish position chart stick on 5mm thick mild steel plate.
1
-
-
... More
Seated Dip (Free Weight): Dimensions: (L X W X H) 1750X1010X890mm.
Main Frame :114 x3mm thick M.S pipe made in bending design and subordinate tube is of 88x3mm thickness M.S pipe. Handle and plate holder frame, bottom frame and front are made in bending design by using 88x3mm thickness M.S pipe.
Handle: is made of 88 x3 mm thick Pipe and 25 mm round M.S bright bar in bending design.
Weight Plates Holder with spring lock and spare weights holder: is made by hard chrome plated mild steel 48 DIA pipe open front covered with half round cap and holder end is covered with heavy quality rubber ring of OD-68 mm and ID-48 mm wall thickness for free weight noiseless operations.
Bearing: Lubricated high grade 6305 '2RS' steel ball bearing.
Base plates OD 166, ID 116, and 6 mm thick And OD 130,1077, 6mm thick M.S round laser cut profile.
Pins: are made up of M.S bright bar.
Bearing bushes: 75mm OD seamless pipe.
Weight plate mounting pipe is of 48 mm MS pipe.
Weight plates: Rubberized moulding round weight plates are used.
Padding and Cushion; Seats and pads are made up of 3 mm thick M.S plate with 2" inches of high-density foam and finally covered with completely stitched heavy vinyl cover in any color.
Foam Roller; Foam roller made up of high density composed foam and covered with stitched heavy vinyl cover, and their ends are covered with aluminum or mild steel chrome plated caps and M8 Allen bolt.
Hardware All hardware's uses button heads bolts and nuts made up of high tensile steel. Hand grips :Hand grips is used on handles wherever necessary made up of high-quality rubber and handle ends are covered with aluminum/pp/nylon caps with grub screw for long endurance.
Spring knob: mechanism is used for seat height adjustment.
Closing caps: AII open ends should close using closing caps of PP/NYLON/HDPE material.
Laser cutting: Profiles of 6mm and 4mm thick .M.S sheet are used for connecting subordinates with each other.
Rubber: Safety base pads: Anti-skid safety base pads made up superior rubber to prevent slippery and damage to floor. Heavy duty 20mm thick rubber pads are placed for resting handles for noise less operations.
Powders Coating: All components are chemically treated to seal exterior and interior surfaces against corrosion. The components are electro statically powder coated at minimum 80-100-micron thickness to make it resistant to scratch, corrosion and humidity in dual color combination.
Safety Instructions and Exercise chart on machine - start & finish position chart stick on 5mm thick mild steel plate.
1
-
-
... More
Preacher Curl (Free Weight):
Dimensions: (LX W X H) 1210X1360X14B0mm.
Main Frame:88 x3 mm thick M.S pipe and subordinate tube is of 88x3mm large thickness M.S pipe in bending design.
Handle: Handle is made of 88 x3 mm thick M.S pipe duly bending design and 25 mm round M.S bright bar.
Weight plates: Rubberized moulding round weight plates are used.
Weight Plates Holder with spring lock and spare weights holder: is made by hard chrome plated mild steel 48 DIA pipe open front covered with half round cap and holder end is covered with heavy quality rubber ring QD-68 mm and ID-48 mm with 10mm wall thickness for free weight noiseless operations.
Bearing: Lubricated high grade 6305 '2RS' steel bail bearing. Base plate: Base plate is OD130, ID 90, and 6 mm thick. Pins: are made up of M.S bright bar.
Bearing bushes: 75mm OD seamless pipe.
Padding and Cushion; Seats and pads are made up of 3 mm thick M.S plate with 2" inches of high-density foam and finally covered with completely stitched heavy vinyl cover in any color.
Hardware : All hardware's uses button heads bolts and nuts made up of high tensile steel. Cables; 6mm thick nylon coated cables with aluminum crimping at one end to attach and hold handle. One additional cable set to be supplied.
Hand grips: Hand grips is used on handles wherever necessary made up of high-quality rubber and handle ends are covered with aluminum/pp/nylon caps with grub screw for long endurance.
Spring knob: mechanism is used for seat height adjustment.
Closing caps : All open ends should dose using closing caps of PP/NYLON/HDPE material. Laser cutting: profiles of 8mm, 6mm and 4mm thick M. S sheet are used for connecting subordinates with each other.
Rubber: Safety base pads: Anti-skid safety base pads made up superior rubber to prevent slippery and damage to floor. Heavy duty 20mm thick rubber pads are placed for resting handles for noise less operations.
Powders Coating: All components are chemically treated to seal exterior and interior surfaces against corrosion. The components are electro statically powder coated at minimum 80-100-micron thickness to make it resistant to scratch, corrosion and humidity in dual color combination.
Safety Instructions and Exercise chart on machine - start & finish position chart stick on 5mm thick mild steel plate
1
-
-
... More
Row (Free Weight):
Dimensions: (L X W X H) 1375X1570X1530mm.
Main Frame: 114 x3 mm thick M.S pipe and subordinate tube is of 88x3mm large thickness M.S pipe. Handle main and base frame, bottom frame are made in bending design using of 88x3mm thick M.S pipe.
Handle: is made of 88 x3 mm thick Pipe bending design and 25 mm round M.S bright bar.
All remaining frame is made by 88 x3mm thick MS pipe.
Weight plates: Rubberized = moulding round weight plates are used.
Weight Plates Holder with spring lock and spare weights holder: is made by hard chrome plated mild steel 48 DIA pipe open front covered with half round cap and holder end is covered with heavy quality rubber ring of OD-68 mm and ID-48 mm with 10mm wall thickness for free weight noiseless operations.
Bearing: Lubricated high grade 6305 ^RS' steel ball bearing.
Base plate :is 00166,10 116, and 6 mm thick.
Pins: are made up of M.S bright bar.
Bearing bushes : 75mm OD seamless pipe.
Weight plate mounting pipe is of 048 mm MS pipe.
Padding and Cushion; Seats and pads are made up of 3 mm thick M.S plate with 2" inches of high-density foam and finally covered with completely stitched heavy vinyl cover in any color.
Hardware : All hardware's uses button heads bolts and nuts made up of high tensile steel.
Hand grips :Hand grips is used on handles wherever necessary made up of high-quality rubber and handle ends are covered with aluminum/pp/nylon caps with grub screw for long,endurance.
Spring knob: mechanism is used for seat height adjustment.
Closing caps-.All open ends should close using closing caps of PP/NYLON/HDPE material.
Laser cutting: profiles of 6mm and 4mm thick .M.S sheet are used for connecting subordinates with each other.
Rubber: Safety base pads: Anti-skid safety base pads made up superior rubber to prevent slippery and damage to floor. Heavy duty 20mm thick rubber pads are placed for resting handles for noise less operations.
Powders Coating: All components are chemically treated to seal exterior and interior surfaces against corrosion. The components are electro statically powder coated at minimum 80-100-micron thickness to make it resistant to scratch, corrosion and humidity in dual color combination.
Safety Instructions and Exercise chart on machine - start & finish position chart stick on 5mm thick mild steel plate.
1
-
-
... More
Calf Raise (Free Weight):
Dimensions: (t X W X H) 1470X735X92Smm.
Main Frame: 114x3 mm thick M.S pipe and subordinate tube is of 88x3mm large thickness M.S pipe. Bottom frame, seat frame, thighs locking frame are made in bending design 88x3mm M.S. Pipe
All remaining frame is made by 88 x3mm thickness M.S Pipe.
Foot Rest: foot rest Is made using heavy duty 100 x 50 x 2.5mm thick capsule tube.
Weight plates: Rubberized moulding round weight plates are used.
Weight Plates Holder with spring lock and spare weights holder, is made by hard chrome plated mild steel 48 DIA pipe open front covered with half round cap and holder end is covered with heavy quality rubber ring of OD-68 mm and ID-48 mm with 10mm wall thickness for free weight noiseless operations.
Bearing: Lubricated high grade 6305 ‘2RS1 steel ball bearing.
Base plate : is OD 166, ID 116, and 6 mm thick.
Pins: are made up of M.S bright bar.
Bearing bushes : 75mm OD seamless pipe.
Padding and Cushion; Seats and pads are made up of 3 mm thick M.S plate with 2" inches of high-density foam and finally covered with completely stitched heavy vinyl cover in any color.
Hardware All hardware's uses button heads bolts and nuts made up of high tensile steel. Hand grips :Hand grips is used on handles wherever necessary made up of high-quality rubber and handle ends are covered with aluminum/pp/nylon caps with grub screw for long endurance.
Spring knob: mechanism is used for seat height adjustment.
Closing caps: All open ends should close using closing caps of PP/NYION/HDPE material.
Laser cutting: profiles of 8 mm 6mm and 4mm thick .M.S sheet are used for connecting subordinates with each other.
Rubber: Safety base pads: Anti-skid safety base pads made up superior rubber to prevent slippery and damage to floor. Heavy duty 20mm thick rubber pads are placed for resting handles for noise less operations.
Powders Coating: All components are chemically treated to seat exterior and interior surfaces against corrosion. The components are electro statically powder coated at minimum 80-100-micron thickness to make it resistant to scratch, corrosion and humidity in dual color combination.
Safety Instructions and Exercise chart on machine - start & finish position chart stick on 5mm thick mild steel plate.
1
-
-
... More
Kneeling Leg Curl (Free Weight):
Dimensions: (L X W X H) 1270X1430X1330mm.
Main Frame:114x3 mm thick M.S pipe in bending design and subordinate tube is of 88x3 mm large thickness M.S pipe. Plate holder frame, front abdomen rest frame, knee rest frame and leg movement frame made in bending design using 088x3mm M.S pipe
Handle: 25 mm round M.S bright bar.
Leg movement frame made of 88 x3mm thick MS pipe.
All remaining frame is made by 88 x3mm thick MS pipe.
Weight plates: Rubberized moulding round weight plates are used.
Weight Plates Holder with spring lock and spare weights holder: is made by hard chrome plated mild steel 48 DIA pipe open front covered with half round cap and holder end is covered with heavy quality rubber ring of OD-68 mm and ID-48 mm with 10mm wall thickness for free weight noiseless operations.
Bearing: lubricated high grade 6305 '2RS' steel ball bearing
Bearing: Lubricated high grade 'ZZ' steel ball bearing.
Base plate :is OD 166, ID 116, and 6 mm thick.
Pins: are made up of M.S bright bar.
Bearing bushes : 75mm OD seamless pipe.
Padding and Cushion; Seats and pads are made up of 3 mm thick M.S plate with 2" inches of high-density foam and finally covered with completely stitched heavy vinyl cover in any color.
Foam Roller; Foam roller made up of high density composed foam and covered with stitched heavy vinyl cover, and their ends are covered with aluminum or mild steel chrome plated caps and M8 Allen bolt.
Hardware :All hardware's uses button heads bolts and nuts made up of high tensile steel. Hand grips :Hand grips is used on handles wherever necessary made up of high-quality rubber and handle ends are covered with aluminum /pp/nylon caps with grub screw for long endurance.
Spring knob: mechanism is used for seat height adjustment.
Closing caps: All open ends should close using closing caps of PP/NYLON/HDPE material. Laser cutting profiles of 8 mm 6mm and 4mm thick .M.S sheet are used for connecting subordinates with each other.
Rubber: Safety base pads: Anti-skid safety base pads made up superior rubber to prevent slippery and damage to floor. Heavy duty 20mm thick rubber pads are placed for resting paddle movement for noise less operations.
Powders Coating: All components are chemically treated to seal exterior and interior surfaces against corrosion. The components are electro statically powder coated at minimum 80-100-micron thickness to make it resistant to scratch, corrosion and humidity in dual color combination.
Safety Instructions and Exercise chart on machine - start & finish position chart stick on 5mm thick mild steel plate.
1
-
-
... More
Leg Extension (Free Weight):
Dimensions: (L X W X H) 1490X1500X1090mm.
Main Frame:114 x3 mm thick M.S pipe in bending design and subordinate tube is of 88x3mm large thickness M.S pipe.00
Leg movement frame: is made of 88 *3 mm and 48 x3mm thick Pipe thick Pipe in bending design and 25 mm round M.S bright bar.
All remaining frame is made by 076 x3mm thick MS pipe.
Weight plates: Rubberized moulding round weight plates are used.
Weight Plates Holder with spring lock and spare weights holder: is made by hard chrome plated mild steel 048 DIA pipe open front covered with half round cap and holder end is covered with heavy quality rubber ring of OD-68 mm and ID*48 mm with 10mm wall thickness for free weight noiseless operations.
Bearing: Lubricated high grade 6305 '2RS' steel ball bearing Base plate :is OD 166, ID 116, and 6 mm thick.
Pins: are made up of M.S bright bar.
Bearing bushes : 75mm OD seamless pipe. Weight plate mounting pipe is of 48 mm MS pipe.
Padding and Cushion; Seats and pads are made up of 3 mm thick M.S plate with 2" inches of high-density foam and finally covered with completely stitched heavy vinyl cover in any color.
Foam Roller; Foam roller made up of high density composed foam and covered with stitched heavy vinyl cover, and their ends are covered with aluminum or mild steel chrome plated caps and M8 Allen bolt.
Hardware: All hardware's uses button heads bolts and nuts made up of high tensile steel. Spring knob: mechanism is used for seat height adjustment.
Closing caps: All open ends should close using closing caps of PP/NYLON/HDPE material.
Laser cutting: profiles of 8 mm 6mm and 4mm thick M.S sheet are used for connecting subordinates with each other.
Rubber: Safety base pads: Anti-skid safety base pads made up superior rubber to prevent slippery and damage to floor. Heavy duty 20mm thick rubber pads are placed for resting paddle movement for noise less operations.
Powders Coating: All components are chemically treated to seal exterior and interior surfaces against corrosion. The components are electro statically powder coated at minimum 80-100-micron thickness to make it resistant to scratch, corrosion and humidity in dual color combination.
Safety Instructions and Exercise chart on machine - start & finish position chart stick on 5mm thick mild steel plate.
1
-
-
... More
45 Degree leg press (Free Weight): Dimensions: (L X W X H) 2480X1240X1450mm.
Main Frame:114 x3 mm thick M.S pipe and subordinate tube is of 88x3mm large thickness M.S pipe. Trolley movement main frame made in bending using 114 x3 mm thick M.S pipe and Bottom frame in bending design made by 88x3mm thickness M.S pipe. Trolley: trolley made 80x40x2.5mm thick capsule tube. Trolley guide bar made up of M.S 25 OD solid bright bar duly hard chrome plated. Trolley footrest made up of 5mm thick checkered plate duly powder coated finally covered 5mm thick heavy-duty rubber sheet. Trolley holder and safety rod is made up of 25mm OD solid M.S bright bar.
Back Rest frame should be height adjustable using spring knob mechanism.
Handle: made up of 25mm OD M.S bright bar in bending design.
All remaining frame is made by 88 x3mm thick.
Weight plates: Rubberized moulding round weight plates are used.
Weight Plates Holder with spring lock and spare weights holder: is made by hard chrome plated mild steel 48 DIA pipe open front covered with half round cap and holder end is covered with heavy quality rubber ring of OD-68 mm and ID-48 mm with 10mm wall thickness for free weight noiseless operations.
Bearing: lubricated high-grade linear steel ball bearing 25 ID (Inner Diameter).
Base plate: is OD 166, ID 116, and 6 mm thick.
Pins: are made up of M.S bright bar.
Bearing bushes :65x65mm mild steel square bar.
Padding and Cushion; Seats and pads are made up of 3 mm thick M.S plate with 2" inches of high-density foam and finally covered with completely stitched heavy vinyl cover in any color.
Hardware: All hardware's uses button heads bolts and nuts made up of high tensile steel.
Hand grips :Hand grips is used on handles wherever necessary made up of high-quality rubber and handle ends are covered with aluminum/pp/nylon caps with grub screw for long endurance.
Spring knob: mechanism is used for seat height adjustment.
Closing caps: All open ends should close using closing caps of PP/NYLON/HDPE material,
Laser cutting-.profiles of 8 mm 6mm and 4mm thick M.S sheet are used for connecting
subordinates with each other;
Rubber: Safety base pads: Anti-skid safety base pads made up superior rubber to prevent slippery and damage to floor.
Powders Coating: All components are chemically treated to seal exterior and interior surfaces against corrosion. The components are electro statically powder coated at minimum 80-100-micron thickness to make it resistant to scratch, corrosion and humidity in dual color combination.
Safety Instructions and Exercise chart on machine - start & finish position chart stick on 5mm thick mild steel plate.
1
-
-
... More
Decline Chest Press (Free Weight):
Dimensions: (L X W X H) 1240X1400X1930mm,
Main Frame: 114 x3 mm thick M.S pipe and subordinate tube is of 88x3mm large thickness M.S pipe. Top, Bottom, Back rest and handle frame should be in bending design is made of 88 x 3 mm thick Pipe and handle025 mm round M.S bright bar in bending design. Weight plates: Rubberized moulding round weight plates are used.
Weight Plates Holder with spring lock and spare weights holder: is made by hard chrome plated mild steel 48 DIA pipe open front covered with half round cap and holder end is covered with heavy quality rubber ring of OD-68 mm and ID-48 mm with 10mm wall thickness for free weight noiseless operations.
Bearing: Lubricated high grade 6305 '2RS1 steel ball bearing
Base plate: is OD 166, ID 116, and 6 mm thick.
Pins: are made up of M.S bright bar.
Bearing bushes: 75mm OD seamless pipe.
Padding and Cushion; Seats and pads are made up of 3 mm thick M.S plate with 2" inches of high-density foam and finally covered with completely stitched heavy vinyl cover in any color.
Hardware :All hardware's uses button heads bolts and nuts made up of high tensile steel. Hand grips :Hand grips is used on handles wherever necessary made up of high-quality rubber and handle ends are covered with aluminum/pp/nylon caps with grub screw for long endurance.
Spring knob: mechanism is used for seat height adjustment.
Closing caps: AII open ends should close using closing caps of PP/NYLON/HDPE material. Laser cutting; profiles of 8 mm 6mm and 4mm thick M.S sheet are used for connecting subordinates with each other.
Rubber: Safety base pads: Anti-skid safety base pads made up superior rubber to prevent slippery and damage to floor.
Powders Coating: All components are chemically treated to seal exterior and interior surfaces against corrosion. The components are electro statically powder coated at minimum 80-100-micron thickness to make it resistant to scratch, corrosion and humidity in dual color combination.
Safety Instructions and Exercise chart on machine: start & finish position chart stick on 5mm thick mild steel plate.
1
-
-
... More
Abdominal Machine (Free Weight):
Dimensions: (L X W X H) 1210X132SX1640mm.
Main Frame:88 x3 mm thick M.S pipe in bending design and subordinate tube is of 60x3mm thickness M.S pipe. Back rest frame made up of 88 x 3 mm thick M.S pipe in bending design.
Seat frame should have 180 Degree rotational.
Handle: is made of 25 mm round M.S bright bar.
All remaining frame is made by 88 x3mm thick and 60 x3mm thick MS pipe.
Weight plates: Rubberized moulding round weight plates are used.
Weight Plates Holder with spring lock and spare weights holder: is made by hard chrome plated mild steel 48 DIA pipe open front covered with half round cap and holder end is covered with heavy quality rubber ring of OD-68 mm and ID-48 mm with 10mm wall thickness for free weight noiseless operations.
Bearing: lubricated high grade 6305 'IRS' steel ball bearing
Pins: are made up of M.S bright bar.
Bearing bushes: 75mm OD seamless pipe.
Weight plate mounting pipe is of 048 mm MS pipe.
Padding and Cushion; Seats and pads are made up of 6 mm thick M.S plate with 2" inches of high-density foam and finally covered with completely stitched heavy vinyl cover in any color.
Foam Roller; Foam roller made up of high density composed foam and covered with stitched heavy vinyl cover, and their ends are covered with aluminum or mild steel chrome plated caps and M8 Allen bolt.
Hardware : All hardware's uses button heads bolts and nuts made up of high tensile steel.
Hand grips: Hand grips is used on handles wherever necessary made up of high-quality
rubber and handle ends are covered with aluminum/pp/nylon caps with grub screw for long
endurance.
Spring knob: mechanism is used for seat height adjustment.
Closing caps: All open ends should close using closing caps of PP/NYLON/HDPE material. Laser cutting: profiles of 8 mm 6mm and 4mm thick M.S sheet are used for connecting subordinates with each other.
Rubber: Safety base pads: Anti-skid safety base pads made up superior rubber to prevent slippery and damage to floor. Heavy duty 20mm thick rubber pads are placed for resting handle for noise less operations.
Powders Coating: All components are chemically treated to seal exterior and interior surfaces against corrosion. The components are electro statically powder coated at minimum 80-100-micron thickness to make it resistant to scratch, corrosion and humidity in dual color combination.
Safety Instructions and Exercise chart on machine - start & finish position chart stick on 5mm thick mild steel plate.
1
-
-
... More
E-Z BAR 28 MM DiA WITH COLLORS (chrome plated)
1
-
-
... More
E-Z BAR 50 MM DIA WITH COLLORS (chrome plated)
1
-
-
... More
BARBELL BARS 28 MM DIA WITH COLLORS (chrome plated)
1
-
-
... More
BARBELL BARS 50 MM DIA WITH COLLORS (chrome plated)
1
-
-
... More
M.S HARD CHROME PLATED WEIGHT PLATES.
1
-
-
... More
RUBBERIZED WEIGHT PLATE
1
-
-
... More
M.S HARD CHROME PLATED DUMBBELLS
1
-
-
... More
RUBBERIZED DUMBBELLS
1
-
-
... More
GYM MAT (GYMNASIUM MAT)
1
-
-
... More
MIRROR FOR GYMNASIUMS
1
-
-
... More
TRADEMILL - Commercial
1
-
-
... More
TRADEMILL-Semi Commercial
1
-
-
... More
ELLIPTICALS-Commercial
1
-
-
... More
UPRIGHT BIKES - Commercial
1
-
-
... More
RECUMBENT BIKE - Commercial
1
-
-
... More
SPINE BIKE - Commercial
1
-
-
... More
EXER CYCLE
1
-
-
... More
4 Station Dual Multi Gym
Chest Press Cum Shoulder Press-80 Kg Lat Cum Rowing - 80 kg
Leg Extension Cum Prone Leg Curl - 75 Kg
Bicep Cum Triceps - 75 Kg
1
-
-
... More
WRIST CONDITIONER - 50 Kg
1
-
-
... More
PREACHER CURL MACHINE - 60 Kg
1
-
-
... More
LAT PULL DOWN - 80 Kg
1
-
-
... More
CHEST PRESS - 80 Kg
1
-
-
... More
MULTI FUNCTIONAL TRAINER - 120 Kg
1
-
-
... More
PEC FLY WITH REAR PELT - 80Kg
1
-
-
... More
SHOULDER PRESS - 70 Kg
1
-
-
... More
LEG EXTENSION & LEG CURL COMBO - 80 Kg
1
-
-
... More
MULTI HIP- 60 Kg
1
-
-
... More
ASSISTED CHIN-UP - 75 Kg
1
-
-
... More
TRICEP
1
-
-
... More
BENCH PRESS BENCH
1
-
-
... More
INCLINE BENCH
1
-
-
... More
DECLINE BENCH
1
-
-
... More
ADJUSTABLE BENCH
1
-
-
... More
45 DEGREE LEG PRESS 7
1
-
-
... More
HACK WITH LEG PRESS
1
-
-
... More
SMITH MACHINE
1
-
-
... More
RACK FOR 20 DUMBELLS WITH BAR RACK
1
-
-
... More
WEIGHT PLATE RACK
1
-
-
... More
POWER CAGE
1
-
-
... More
E-Z BAR 50 MM DIA WITH COLLORS (chrome plated)
1
-
-
... More
E-Z BAR 25 MM DIA WITH COLLORS (chrome plated)
1
-
-
... More
BARBELL BARS 50 MM DIA WITH COLLORS (chrome plated)
1
-
-
... More
BARBELL BARS 25 MM DIA WITH COLLORS (chrome plated)
1
-
-
... More
M.S HARD CHROME PLATED WEIGHT PLATES.
1
-
-
... More
RUBBERIZED WEIGHT PLATE
1
-
-
... More
M.S HARD CHROME PLATED DUMBBELLS.
1
-
-
... More
RUBBERIZED DUMBBELLS
1
-
-
... More
GYM MAT (GYMNASIUM MAT)
1
-
-
... More
TRADEMILL - Commercial
1
-
-
... More
TRADEMILL - Semi Commercial
1
-
-
... More
ELLIPTICALS - Commercial
1
-
-
... More
UPRIGHT BIKES - Commercial
1
-
-
... More
RECUMBENT BIKE - Commercial
1
-
-
... More
SPINE BIKE - Commercial
1
-
-
... More
Air Walker
Providing and fixing Air Walker manufactured by combination of mild steel and alt-season artificial wood to seek eco-friendly greenery effect.
Dimensions: (L X W X H)= 1210X390X1264mm.
1) Main Frame Cover - Completely covered top to bottom with all-season artificial wood, outer size 120X120mm,100 X 100 mm inner area to accommodate square tube shape which is Completely molded in one single piece.
2) Main Frame – Consist 91X91x2.5mm Thickness Square Tube get maximum internal strength to structure.
3) Paddle- 042mm OD "B" class Gl pipe.
4) Handle Demountable Type - 33mm OD "B" class Gl pipe Attached 5 mm thick MS Plate for Demountable system
5) Footrest- cast iron 124X296X5mm thick and M.S. plate of 2mm thick used as support.
6) Main Pipe Top Closing cap’s- Decent Design Size 120X120 PP/HDPE/MS. material.
7) Main Frame Bottom protective cover -Decent Design PP/HDPE material.
8) Nut & Bolts Closing Caps- All Nut & Bolt Closing caps made from Stainless Steel Press fit or PP/HDPE.
9) Bracket- 8mm thick laser profile is use to support paddle frame.
10) Foundation stool: Made from main pipe 91x91x2mm pipe and top support of M.S. plate of 250X250mm Square 8mm thickness is welded on top. Torque steel is used to support center pipe. Height of stool is 3ft.
11) Foundation plate -M.S. 250X250mm Square with 8mm thick.
12) Foundation stool is embedded in C.C. stock below ground level.
13) Bearing- 6005 use is permanent lubricated reputed brands or self-lubricated imported bushing.
14) Hardware Nut & Bolts- High Tensile steel Zink Plated
15) Pin's - 25mm M.S./stainless steel specification 304 duly machined as per size.
16) Circlips- A 24 circlips are used for assembly.
17) Bearing bushes- 60mm OD and - 0 50mm OD seamless pipe.
18) Surface Coating-best quality of powder coating 80 to 100 micron.
19) Safety Instructions and Exercise chart- Made from Aluminum/stainless steel stick-on product.
1
-
-
... More
Chest Press Double
Providing and fixing 'Chest Press Double' manufactured by combination of mild steel and all-season artificial wood to seek eco-friendly greenery effect.
Dimensions: (L X W X H}= 1975X720X1920mm.
1) Main Frame Cover - Completely covered top to bottom with all-season artificial wood, outer size 120X120mm, 100 X 100 mm inner area to accommodate square tube shape which is completely molded in one single piece.
2) Main center pipe- - 91X91x2.5mm Thickness Square Tube get maximum internal strength to structure.
3) Remaining frame- made up of 48mmOD 60 OD "B" Class G.i. pipe.
4) Handle - Made up of 48mm OD "B" Class G.I. pipe,
5) Connecting Link - made up of 48mmOD "B" Class G.I. pipe.
6) Seat & back rest - 330 X 300X 2mm thick M.S. seat with corner fillet for safety.
7) Handle is connected with frame by 8 MM laser cutting MS profile
8) Main Pipe Top Closing cap’s- Decent Design Size 120X120 PP/HDPE/MS. Material
9) Main Frame Bottom protective cover - Decent Design PP/HDPE material.
10) Nut & Bolts Closing Caps- Ail Nut & Bolt Closing caps made from PP/HDPE/SS
11) Bearing bush Closing cap’s-PP/SS/HDPE material.
12) Foundation stool: Made from main pipe 91x91x2mm mm pipe and top support of M.S. plate of 250X250mm Squire 8mm thickness is welded top. Torque steel is used to support center pipe. Height of stool is 3ft.
13) Foundation plate -M.S. 250X250mm Square with 8mm thick.
14) Foundation stool is embedded in C.C. stock belowground level
15) Bearing- 6005 use is permanent lubricated reputed brands or self-lubricated imported bushing.
16) Pin's - 25mm M.S./ stainless steel specification 304 duly machined as per size
17) Bearing bushes - 60mm OD and - 50mm OD seamless pipe.
18) Grips • High quality rubber 40mm OD.
19) Cirdips-A 24 circlips are used for assembly.
20) Coating - best quality of powder coating 80 to 100 micron.
21) Safety Instructions and Exercise chart - Made From Aluminum/stainless-steel stick-on product
1
-
-
... More
Standing-Seating Twister
Providing and fixing 'Standing-Seating Twister' manufactured by combination of mild steel and all-season artificial wood to seek eco-friendly greenery effect.
Dimensions: (L X W X H)= 1530X1525X1450mm.
1) Main Frame Cover - Completely covered top to bottom with all-season artificial wood, outer size 120X120mm, 100 X 100 mm inner area to accommodate square tube shape which is completely molded in one single piece.
2) Main Frame - Consist -. 91X91x2.5mm Thickness Square Tube get maximum internal strength to structure.
3) Seat plate support - 60 mm OD "B" Class G.l Pipe.
4) Seating Footrest ring- 33 mm OD "B" Class G.l Pipe made by rolling.
5) Seating ring support - 25 mm OD "B" Class G.l Pipe.
6) Bottom Seat and Standing Support -Made From 100X50X2.5mm Pipe Attached 5 mm thick MS Plate for Demountable system
7) Standing plate- 300mm OD X 10mm thick M.S. plate.
8) Seating plate- 300mm OD X 10mm thick M.S. plate.
9) Handle- 33mm "6" Class G.l. Pipe made by rolling
10) Main Pipe Top Closing cap's- Decent Design Size 120X120 PP/HDPE/MS. Material
11) Main Frame Bottom protective cover - Decent Design PP/HDPE material.
12) Nut & Bolts Closing Caps- All Nut & Bolt Closing caps made from PP/HDPE/SS
13) Bearing bush Closing cap's- PP/SS/HDPE material
14) Foundation stool: Made from main pipe 91x91x2mmpipe and top support of M.S. plate of 250X250mm Squire 8mm thickness is welded top. Torque steel is used to support center pipe. Height of stool is 3ft.
15) Foundation plate -M.S. 250X250mm Square with 8mm thick.
16) Foundation stool is embedded in C.C. stock belowground level
17) Bearing- 6005 use is permanent lubricated reputed brands or self-lubricated imported bushing.
18) pin's - 25mm M.S./ stainless steel specification 304 duly machined as per size
19) Bearing bushes - 60mm OD and - 50mm OD seamless pipe.
20) Cirdips-A 24 circlips are used for assembly.
21) Coating - best quality of powder coating 80 to 100 micron.
22) Safety Instructions and Exercise chart - Made from Aluminum/stainless-steel stick-on product
1
-
-
... More
Horse Rider
Providing and fixing 'Horse Rider' manufactured by combination of mild steel and all-season artificial wood to seek eco-friendly greenery effect.
Dimensions: (L X W X H)= 1150X420X1425mm.
1) Main Frame Cover • Completely covered top to bottom with all-season artificial wood, outer size 120X120mm, 100 X 100 mm inner area to accommodate square tube shape which is completely molded in one single piece.
2) Main Frame – Consist 91X91x2.5mm Thickness Square Tube get maximum internal strength to structure.
3) Remaining frame- made by 48 mm OD "B" class Gl pipe Attached 5 mm thick MS Plate for demountable system
4) Seat frame - Is made by 48 mm OD "B" class Gl pipe. Duly Bend Attached 5 mm thick MS Plate for Demountable system
5) Centre Link - made up of 48mm OD "B" Class G.l. pipe.
6) Handle - 33 mm OD "B” Class Gl pipe.
7) Link - made up of 48mm OD "B" Class G.l. pipe. Angle between link and ground position is 10-20 degree
8) Paddle vertical support - 60 mm OD "8" Class Gl pipe.
9) Foot Rest pipe - 33 mm OD "B" Class Gl pipe.
10) Support frame -10 mm thick MS flat is used. Attached 5 mm thick MS Plate for Demountable system
11) Seat – 5mm thick MS laser cutting profile is used.
12) Main Pipe Top Closing cap's- Decent Design Size 120X120 PP/HDPE/MS. Material
13) Main Frame Bottom protective cover - Decent Design PP/HDPE material.
14) Nut & Bolts Closing Caps- All Nut & Bolt Closing caps made from PP/HDPE/SS
15) Bearing bush Closing cap's- PP/SS/HDPE material
16) Foundation stool: Made from main pipe 91x91x2mm pipe and top support of M.S. plate of 250X250mm Squire 8mm thickness is welded top. Torque steel is used to support center pipe. Height of stool is 3ft,
17) Foundation plate -M.S 250X250mm Square With 8mm thick.
18) Foundation stool is embedded in C.C. stock below ground level
19) Bearing- 6005 use is permanent lubricated reputed brands or self-lubricated imported bushing.
20) Pin's - 25mm M.S./ stainless steel specification 304 duly machined as per size
21) Bearing bushes - 60mm OD and - 50mm OD seamless pipe.
22) Grips - High quality rubber 0 40mm OD.
23) Circlips-A 24 circlips are used for assembly.
24) Coating - best quality of powder coating 80 to 100 micron.
25) Safety Instructions and Exercise chart - Made from Aluminum/stainless-steel stick on product.
1
-
-
... More
Leg Press Double
Providing and fixing 'Leg Press Double' manufactured by combination of mild steel and all-season artificial wood to seek eco-friendly greenery effect.
Dimensions: (L X W X H)« 1696X415X1520mm.
1) Main Frame Cover - Completely covered top to bottom with all-season artificial wood, outer size 120X120mm, 100 X 100 mm inner area to accommodate square tube shape which is completely molded in one single piece.
2) Main Frame Cover-Fully Top to Bottom Covered with all-season Artificial Wood Outer size 120X120 mm 100X100 mm inner gap to accommodate Square Tube Shape fully molded One-piece
3) Main Frame - Consist -. 91X91x2.5mm Thickness Square Tube get maximum internal strength to structure
4) Seat Frame Top support- Made by 0 48mm OD "B" Class Gl pipe, Attached 5 mm thick MS Plate for Demountable system.
5) Foot rest support pipe-Made by 48mm OD "B” Class Gl pipe. Attached 5mm thick MS Plate for Demountable system
6) Seat Frame Main Pipe - Made by 60mm OD "B" Class Gl pipe. Attached 10mm thick MS laser Profile Plate for Demountable system
7) Seat frame - 42mm OD "B” Class GI Pipe. Duly Bend
8) Leg Press back rest should be angled in 120-130 degree
9) Foot rest- cast iron 124X296X5mmthick and M.S plate of 2mm thick use to support it.
10) Seat-330X300X2mm thick M.S. seat with corner fillet for safety.
11) Main Pipe Top Closing cap's- Decent Design Size 120X120 PP/HDPE/MS. Material
12) Main Frame Bottom protective cover - Decent Design PP/HDPE material.
13) Nut & Bolts Closing Caps- All Nut & Bolt Closing caps made from PP/HDPE/SS
14) Bearing bush Closing cap's- PP/SS/HDPE material
15) Foundation stool: Made from main pipe 91x91x2mm pipe and top support of M.S. plate of 250X250mm Squire 8mm thickness is welded top. Torque steel is used to support center pipe. Height of stool is 3ft.
16) Foundation plate-M.S. 250X250mm Square With 8mm thick.
17) Foundation stool is embedded in C.C. stock belowground level
18) Bearing- 6005 use is permanent lubricated reputed brands (SKF/FAG) or self-lubricated imported bushing.
19) Pin's - 25mm M.S./ stainless steel specification 304 duly machined as per size
20) Bearing bushes - 60mm OD and - 50mm OD seamless pipe.
21) Grips - High quality rubber 40mm OD.
22) Cirdips-A 24 circlips are used for assembly
23) Coating - best quality of powder coating 80 to 100 micron.
24) Safety instructions and Exercise chart - Made from Aluminum/stainless-steel stick-on product.
1
-
-
... More
Rower Providing and fixing 'Rower' manufactured by combination of mild steel and all-season artificial wood to seek eco-friendly greenery effect. Dimensions: (L X W X H) = 1492X92SX1030mm. 1) Main Frame Cover - Completely covered top to bottom with all-season artificial wood, outer size 120X120mm, 100 X 100 mm inner area to accommodate square tube shape which is completely molded in one single piece. 2) Top and Bottom Main Frame - Consist 91X91x2.5mm Thickness Square tube get maximum internal strength to structure 3) Foot Rest Support-Made by 60mm OD "B" Class G.l. pipe. Attached 5 mm thick MS Plate for Demountable system 4) Handle- 33mm OD "B" Class G.l pipe. Duly Bend. Angle between handle and horizontal surface Is 75-80 degree.
5) All Connecting Link - Made By 48mm OD "B" Class G.l. pipe. 6) Seat - 330 X 300 X 2mm thick M.S. seat with corner fillet for safety. 7) Main Pipe Top Closing cap's- Decent Design Size 120X120 PP/HDPE/MS. Material 8) Main Frame Bottom protective cover - Decent Design Size PP/HDPE material. 9) Nut & Bolts Closing Caps- All Nut & Bolt Closing caps made from PP/HDPE/SS 10) Bearing bush Closing cap's- PP/SS/HDPE material 11) Foundation stool: Made from main pipe 91x91x2mm pipe and top support of M.S. plate of 250X250mm Squire 8mm thickness is welded top. Torque steel is used to support center pipe. Height of stool is 3ft. 12) Foundation plate -M.S. 2S0X250mm Square With 8mm thick. 13) Foundation stool is embedded in C.C. stock below ground level 14) Bearing- 6005 use is permanent lubricated reputed brands or self-lubricated imported bushing. 15) Pin's - 25mm M.S./stainless steel specification 304 duly machined as per size 16) Bearing bushes - 60mm OD and - 50mm OD seamless pipe. 17) Grips - High quality rubber 0 40mm OD. 18) Cirdips-A 24 circlips are used for assembly. 19) Coating • best quality of powder coating 80 to 100 micron. 20) Safety Instructions and Exercise chart - Made from Aluminum/stainless-steel stick-on product.
1
-
-
... More
Seated Puller Double Providing and fixing 'Seated Puller Double' manufactured by combination of mild steel and all-season artificial wood to seek eco-friendly greenery effect. Dimensions: (L X W X H) = 197SX680X1975mm. 1) Main Frame Cover - Completely covered top to bottom with all-season artificial wood, outer size 120X120mm, 100 X 100 mm inner area to accommodate square tube shape which is completely molded in one single piece.
2) Main Frame - Consist -. 91X91x2.5mm Thickness Square Tube get maximum internal strength to structure 3) Seat Frame Top support* Made by 48mm OD "B" Class G! pipe. Attached 5 mm thick MS Plate For Demountable system
4) Seat Main Frame- Made by 48mm OD "B" Class Gl pipe. Attached With Handle Profile 5) Handle Profile- Made By M.S. 10 mm Thick Laser cutting Profile 6) Handle • Made by 048 mm OD "B" Class G.l. pipe. 7) Connected Link-Made by by 048 mm OD "B" Class G.l. pipe 8) Seat - 330 X 300 X 2mm thick M.S. seat with corner fillet for safety. 9) Main Pipe Top Closing cap's- Decent Design Size 120X120 PP/HDPE/MS. Material 10) Main Frame Bottom protective cover - Decent Design PP/HDPE material. 11) Nut & Bolts Closing Caps- All Nut & Bolt Closing caps made from PP/HDPE/SS 12) Bearing bush Closing cap's-PP/SS/HDPE material 13) Foundation stool: Made from main pipe 91x91x2mm pipe and top support of M.S. plate of 250X250mm Squire 8mm thickness is welded top. Torque steel is used to support center pipe. Height of stool is 3ft
14) Foundation plate-M.S 250X250mm Square With 8mm thick.
15) Foundation stool is embedded in C.C. stock below ground level
16) Bearing- 6005 use is permanent lubricated reputed brands or self-lubricated imported bushing.
17) Pin's - 25mm M.S./ stainless steel specification 304 duly machined as per size
18) Bearing bushes - 60mm OD and - 50mm OD seamless pipe.
19) Grips - High quality rubber 40mm OD.
20) Circlips-A 24 circlips are used for assembly.
21) Coating - best quality of powder coating 80 to 100 micron.
22) Safety Instructions and Exercise chart - Made from Aluminum/stainless steel stick on product
1
-
-
... More
Shoulder Builder Double
Providing and fixing 'Shoulder Builder Double' manufactured by combination of mild steel and all-season artificial wood to seek eco-friendly greenery effect.
Dimensions: (t X W X H)= 910X578X1520mm.
1) Main Frame Cover - Completely covered top to bottom with all-season artificial wood, outer size 120X120mm, 100 X 100 mm inner area to accommodate square tube shape which is completely molded in one single piece.
2) Main Frame - Consist -. 91X91x2.5mm Thickness Square Tube get maximum internal strength to structure
3) Ring Fitting Top support- Made by 0 48mm OD "B" Class Gi pipe. Attached 5 mm thick MS Plate For Demountable system
4) Shoulder Builder ring - 33 mm OD “B" Class G.l Pipe.
5) Shoulder ring And Bearing Bush support Pipe-025 mm OD "B" Class G.l Pipe.
6) Nylon knob with Bearing - Is fixed on shoulder ring pipe for rotating purpose, 2 set to be fixed in a position for kids and adults.
7) Main Pipe Top Closing cap's- Decent Design Size 120X120 PP/HDPE/M5. Material
8) Main Frame Bottom protective cover - Decent Design PP/HDPE material.
9) Nut & Bolts Closing Caps- All Nut 8i Bolt Closing caps made from PP/HDPE/SS
10) Bearing bush Closing cap's- PP/SS/HDPE material
11) Foundation stool: Made from main pipe 91x91x2mm pipe and top support of M.S. plate of 250X250mm Squire 8mm thickness is welded top. Torque steel is used to support center pipe. Height of stool is 3ft.
12) Foundation plate -M. S 250X250mm Square With 8mm thick.
13) Foundation stool is embedded in C.C. stock below ground level
14) Bearing- 6005 use is permanent lubricated reputed brands (SKF/FAG) or self-lubricated imported bushing.
15) Pin's- 25mm M.S./stainless steel specification 304 duly machined as per size
16) Bearing bushes - 60mm OD and - 50mm OD seamless pipe.
17) Grips - High quality rubber 40mm OD.
18) Circlips-A 24 circlips are used for assembly.
19) Coating - best quality of powder coating 80-100 micron.
20) Safety Instructions and Exercise chart - Made from Aluminum/stainless-steel stick on product
1
-
-
... More
Sit Up Board
Providing and fixing 'Sit Up Board' manufactured by combination of mild steel and all-season artificial wood to seek eco-friendly greenery effect.
Dimensions: (L X W X H)= 1590X480X680mm.
1) Main Frame Cover - Completely covered top to bottom with all season artificial wood, outer size 120x120mm, 100 X 100 mm inner area to accommodate square tube shape which is completely molded in one single piece.
2) Main Frame - Consist 91X91x2.5mm Thickness Square Tube get maximum internal strength to the structure.
3) Back rest frame made from 33 OD "B" Class G.l. pipe in bending design and finally covered with 5mm thick mild steel checkered plate. Back rest frame should have adjustment mechanism for 3 different positions.
4) Top and Bottom Leg Support- 60mm OD "B" Class G.i Pipe,
5) Main Frame Bottom Support- 60mm OD "B" Class G.i Pipe
6) Remaining Frame - 60 mm OD "B" Class G.l pipe.
7) Backrest Seat- made by All-season Artificial Wood Eco Friendly look
8) Foundation stool: Made from main pipe 91x91x2mm pipe and top support of M.S. plate of 250X250mm Squire 8mm thickness is welded top. Torque steel is used to support center pipe. Height of stool is 3ft.
9) Foundation plate -M. S 250X250mm Square With 8mm thick.
10) Foundation stool is embedded in C.C. stock below ground level
11) Coating - best quality of powder coating 80-100 micron.
12) Safety Instructions and Exercise chart - Made from Aluminum/stainless-steel stick-on product
1
-
-
... More
Sky Walker
Providing and fixing 'Sky Walker' manufactured by combination of mild steel and all-season artificial wood to seek eco-friendly greenery effect.
Dimensions(L X W X H)= 1740X920X1730mm.
1) Main Frame Cover - Completely covered top to bottom with all-season artificial wood, outer size 120X120mm, 100 X 100 mm inner area to accommodate square tube shape which is completely molded in one single piece.
2) Main Frame Cover-Fully Top To Bottom covered With All-season Artificial Wood Outer size 120X120 mm 100X100 mm inner gap to accommodate Square Tube Shape fully molded One- piece .
3) Main Frame – Consist 91X91x2.5mm Thickness Square Tube get maximum internal strength to structure.
4) Paddle vertical support - 48mm OD "B" Class Gl pipe.
5) Handle- 33mm OD "B" Class GI pipe dually bending design.
6) Leg movement frame- 50mm X50mm X2mm thick square pipe.
7) Footrest - cast Iron 124X296X5mm thick and M.S. plate of 2mm thick use for to support it.
8) Main Pipe Top Closing cap's- Decent Design Size 120X120 PP/HDPE/MS. Material
9) Main Frame Bottom protective cover - Decent Design PP/HDPE material.
10) Nut & Bolts Closing Caps- All Nut & Bolt Closing caps made from PP/HDPE/SS
11) Bearing bush Closing cap's- PP/SS/HDPE material.
12) Foundation stool: Made from main pipe 91x91x2mmpipe and top support of M.S. plate of 250X250mm Squire 8mm thickness is welded top. Torque steel is used to support center pipe. Height of stool is 3ft.
13) Foundation plate -M.S 2S0X250mm Square With 8mm thick.
14) Foundation stool is embedded in C.C. stock below ground level
15) Bearing- 6005 use Is permanent lubricated reputed brands or self-lubricated imported bushing.
16) Pin's - 25mm M.S./ stainless steel specification 304 duly machined as per size
17) Bearing bushes - 60mm OD and 50mm OD seamless pipe.
18) Grips - High quality rubber 40mm OD.
19) Circlips-A 24 circlips are used for assembly.
20) Coating - best quality of powder coating 80-100 micron.
21) Safety Instructions and Exercise chart - Made From Aluminum/stainless steel stick
1
-
-
... More
Surf Board
Providing and fixing 'Surf Board' manufactured by combination of mild steel and all-season artificial wood to seek eco-friendly greenery effect.
Dimensions: (L X W X H)= 1110X900X1410mm.
1) Main Frame Cover - Completely covered top to bottom with all-season artificial wood, outer size 120X120mm, 100 X 100 mm inner area to accommodate square tube shape which is completely molded in one single piece.
2) Main Frame - Consist -. 91X91x2.Smm Thickness Square Tube get maximum internal strength to structure.
3) Main Frame Connecting pipe - 91X91x2.5mm Thickness G.l Square Tube
4) Handle- 42mm and 33 OD “B" Class Gl pipe.. Attached S mm thick MS Plate For Demountable system
5) Leg movement frame- 48mm OD "B” Class Gl pipe.. Attached 5 mm thick MS Plate For Demountable system
6) Footrest - cast iron 325X270X8mm thick and M.S. plate of 250x200x2mm thick use for to support it.
7) Bracket- 8mm thick laser profile is use to support leg movement frame.
8) Main Pipe Top Closing cap's- Decent Design Size 120X120 PP/HDPE/MS. Material
9) Main Frame Bottom protective cover - Decent Design PP/HDPE material.
10) Nut & Bolts Closing Caps- All Nut & Bolt Closing caps made from PP/HDPE/SS
11) Bearing bush Closing cap's-PP/SS/HDPE material
12) Foundation stool: Made from main pipe 91x91x2mm pipe and top support of M.S. plate of 250X25Qmm Squire 8mm thickness is welded top. Torque steel is used to support center pipe. Height of stool is 3ft.
13) Foundation plate -M.S 250X250mm Square with 8mm thick.
14) Foundation stool is embedded in C.C. stock below ground level
15) Bearing- 6005 use is permanent lubricated reputed brands or self-lubricated imported bushing.
16) Pin's - 25mm M.S./ stainless steel specification 304 duly machined as per size
17) Bearing bushes - 60mm OD and - 50mm OD seamless pipe.
18) Grips - High quality rubber 40mm OD.
19) Cirdips-A 24 circlips are used for assembly.
20) Coating - best quality of powder coating 80-100 micron.
21) Safety Instructions and Exercise chart - Made from Aluminum/stainless steel stick on product.
1
-
-
... More
Exer Cycle Providing and fixing 'Exer Cycle' manufactured by combination of mild steel and all-season artificial wood to seek eco-friendly greenery effect. Dimensions: (L X W X H)= 1370X720X1210mm. 1) Main Frame Cover - Completely covered top to bottom with all-season artificial wood, outer size 120X120mm, 100 X 100 mm inner area to accommodate square tube shape which is completely molded in one single piece.
2) Main Frame - Consist -. 91X91x2.5mm Thickness Square Tube get maximum internal strength to structure. 3) Handle- 33mm OD "B" Class 61 Round pipe dully bending design. Attached 5 mm thick MS Plate For Demountable system
4) Seat- 5mm thick MS laser cutting profile is used. 5) Paddle-100mmX50mm capsule pipe and 40x16 mm MS flat is use for connecting the paddle and shaft. 6) Main Pipe Top Closing cap's- Decent Design Size 120X120 PP/HDPE/MS. Material 7) Main Frame Bottom protective cover - Decent Design PP/HDPE material. 8) Nut & Bolts Closing Caps- Ail Nut & Bolt Closing caps made from PP/HDPE/SS 9) Bearing bush Closing cap's- PP/SS/HDPE material 10) Foundation stool: Made from main pipe 91x91x2mm pipe and top support of M.S. plate of 250X250mm Squire 8mm thickness is welded top. Torque steel is used to support center pipe. Height of stool is 3ft. 11) Foundation plate -M.S 250X250mm Square With 8mm thick. 12) Foundation stool is embedded in C.C. stock below ground level 13) Bearing- 6005 use is permanent lubricated reputed brands or self-lubricated imported bushing. 14) Pin’s - 25mm M.S./ stainless steel specification 304 duly machined as per size 15) Bearing bushes - 60mm OD and 50mm OD seamless pipe. 16) Grips-High quality rubber 040mm OD. 17) Circlips-A 24 circlips are used for assembly. 18) Coating - best quality of powder coating 80-100 micron. 19) Safety Instructions and Exercise chart - Made from Aluminum/stainless steel stick on product
1
-
-
... More
Multi-Functional Trainer Providing and fixing 'Multi-Functional Trainer' manufactured by combination of mild steel and all-season artificial wood to seek eco-friendly greenery effect. Dimensions: (LX W X H)= 1840X490X1290mm. 1) Main Frame Cover - Completely covered top to bottom with all-season artificial wood, outer size 120X120mm, 100X100mm inner area to accommodate square tube shape which is completely molded in one single piece.
2) Main Frame - Consist -. 91X91x2.5mm Thickness Square Tube gets maximum internal strength to structure.
3) Back support- Made by All-season Artificial Wood Eco Friendly Green look 4) Leg riser support pipe- 80X40X2.Smm thick rectangle pipe. Attached 5 mm thick MS Plate For Demountable system
5) Handle- Leg Raiser Hand Holding Pipe And Dipping Handle Made by 0 33mm OD "B" Class G.l. Pipe. Duly Bend
6) Chin-up support - 60mm OD "B" Class G.l. Pipe. Attached 5 mm thick MS Plate For Demountable system
7) Chin-up handle - 2Smm OD MS bar with knurling. 8) Main Pipe Top Closing cap’s- Decent Design Size 120X120 PP/HDPE/MS. Material 9) Main Frame Bottom protective cover - Decent Design PP/HDPE material. 10) Nut & Bolts Closing Caps- All Nut & Bolt Closing caps made from PP/HDPE/SS 11) Foundation stool: Made from main pipe 91x91x2mm pipe and top support of M.S Plate of 250X250mm Squire 8mm thickness is welded top Square tube of 30x30x2 mm is use for to support center pipe.Height of stool is 3ft.
12) Foundation plate -M.S 250X250mm Square With 8mm thick. 13) Foundation stool Is embedded in C.C. stock below ground level
14) Grips - High quality rubber 40mm OD.
15) Coating - best quality of powder coating 80-100 micron.
16) Safety instructions and Exercise chart - Made From Aluminum/stainless steel stick on product
1
-
-
... More
Bench with Fixed Weight
Providing and fixing 'Bench with Fixed Weight' manufactured by combination of mild steel and all-season artificial wood to seek eco-friendly greenery effect.
Dimensions (L X W X H)= 1420X670X2620mm.
1) Main Frame Cover - Completely covered top to bottom with all-season artificial wood, outer size 120X120mm, 100X100mm inner area to accommodate square tube shape which is completely molded in one single piece.
2) Main Frame - Consist 91X91x2.5mm Thickness Square Tube get maximum internal strength to structure.
3) Backrest frame-Made from 42OD"B" Class mm G.l. pipe.
4) Bottom support pipe - 50X25X2.5mm thick rectangle pipe.
5) Fixed weight- made from SS 202 Stainless Steel tube and 5kg casting round plate is attached at both end of bar.
6) Backrest Seat-made By made by all-season Artificial Wood Eco Friendly Green look
7) Main Pipe Top Closing cap's- Decent Design Size 120X120 PP/HDPE/MS. Material
8) Main Frame Bottom protective cover - Decent Design PP/HDPE material.
9) Nut & Bolts Closing Caps* All Nut & Bolt Closing caps made from PP/HDPE/SS
10) Foundation stool: Made from main pipe 91x91x2mm pipe and top support of M.S. plate of 250X250mm Squire 8mm thickness is welded top. Torque steel is used to support center pipe. Height of stool is 3ft.
11) Foundation plate -M.S 250X250mm Square with 8mm thick.
12) Foundation stool is embedded in C.C. stock below ground level
13) Coating - best quality of powder coating 80-100 micron.
14) Safety Instructions and Exercise chart - Made From Aluminum/stainless steel stick on product
1
-
-
... More
Shoulder Exercise Spinner
Providing and fixing 'Shoulder Exercise Spinner* manufactured by combination of mild steel and all-season artificial wood to seek eco-friendly greenery effect.
Dimensions (L X W X H)= 1230X1210X1310mm.
1) Main Frame Cover - Completely covered top to bottom with all-season artificial wood, outer size 120X120mm, 100X100mm inner area to accommodate square tube shape which is completely molded in one single piece.
2) Main Frame - Consist -. 91X91x2.5mm Thickness Square Tube get maximum internal strength to structure
3) Ring Fitting Top support- Made by 48mm OD "B" Class Gl pipe. Duly Bend attached 5 mm thick MS Plate For Demountable system.
4) Spinner ring - 33 mm OD "B" Class G.l Pipe.
5) Spinner ring And Bearing Bush support Pipe - 25 mm OD "B" Class G.l Pipe.
6) Shoulder Ring size - Front Part DIA 450mm and Rear Part size is DIA 600mm.
7) Nylon knob with Bearing - is fixed on shoulder ring pipe for rotating purpose.
8) Main Pipe Top Closing cap's- Decent Design Size 120X120 PP/HDPE/MS. Material.
9) Main Frame Bottom protective cover - Decent Design PP/HDPE material.
10) Nut & Bolts Closing Caps- All Nut & Bolt Closing caps made from PP/HDPE/SS.
11) Bearing bush Closing cap's- PP/SS/HDPE material
12) Foundation stool: Made from main pipe 91x91x2mm pipe and top support of M.S. plate of 250X250mm Squire 8mm thickness is welded top. Torque steel is used to support center pipe. Height of stool is 3ft.
13) Foundation plate-M.S 250X2S0mm Square With 8mm thick.
14) Foundation stool is embedded in C.C. stock below ground level
15) Bearing- 6005 use is permanent lubricated reputed brands or self-lubricated imported bushing.
16) Pin's - 25mm M.S./ stainless steel specification 304 duly machined as per size
17) Bearing bushes - 60mm OD and - 50mm OD seamless pipe.
18) Circlips-A 24 circlips are used for assembly.
19) Coating - best quality of powder coating 80-100 micron.
20) Safety Instructions and Exercise chart - Made From Aluminum/stainless steel stick on product.
1
-
-
... More
Double Bar
Providing and fixing 'Double Bar' manufactured by combination of mild steel and all-season artificial wood to seek eco-friendly greenery effect.
Dimensions: (L X W X H) 1870X540X2010mm.
1) Main Frame Cover - Completely covered top to bottom with all-season artificial wood, outer size 120X120mm, 100X100mm inner area to accommodate square tube shape which is completely molded in one single piece.
2) Main Frame - Consist 91X91x2.5mm Thickness Square Tube get maximum internal strength to structure.
3) Double Bar Hand Rail Pipe- 42mm OD "B" Class Gl pipe.. Attached 5 mm thick MS Plate For Demountable system
4) Main Pipe Top Closing cap's- Decent Design Size 120X120 PP/HDPE/MS. Material
5) Main Frame Bottom protective cover - Decent Design PP/HDPE material.
6) Nut & Bolts Closing Caps- All Nut & Bolt Closing caps made from PP/HDPE/SS
7) Foundation stool: Made from main pipe 91x91x2mmpipe and top support of M.S. plate of 250X250mm Squire 8mm thickness is welded top. Torque steel is used to support center pipe. Height of stool is .3ft.
8) Foundation plate -M.S 250X250mm Square With 8mm thick.
9) Foundation stool is embedded in C.C. stock below ground level
10) Coating - best quality of powder coating 80-100 micron.
11) Safety Instructions and Exercise chart - Made From Aluminum/stainless steel stick on product
1
-
-
... More
Horizontal Bar
Providing and fixing 'Horizontal Bar* manufactured by combination of mild steel and all-season artificial wood to seek eco-friendly greenery effect.
Dimensions: (L X W X H) 3580X2610mm.
1) Main Frame Cover • Completely covered top to bottom with all-season artificial wood, outer size 120X120mm, 100X100mm inner area to accommodate square tube shape which Is completely molded in one single piece.
2) Main Frame – Consist 91X91x2.Smm Thickness Square Tube get maximum internal strength to structure.
3) Horizontal Barb Hand Rail Pipe- 0 42mm 00 "B” Class Gl pipe.. Attached 5 mm thick MS Plate for Demountable system
4) Footrest - Made By 0 42mm OD "B" Class Gl pipe.. Attached 5 mm thick MS Plate for Demountable system M.S. plate of 150x100x2mm thick use for to support it.
5) Main Pipe Top Closing cap's- Decent Design Size 120X120 PP/HDPE/MS. Material
6) Main Frame Bottom protective cover - Decent Design PP/HDPE material.
7) Nut & Bolts Closing Caps- All Nut & Bolt Closing caps made from PP/HDPE/SS
8) Foundation stool: Made from main pipe 91x91x2mm pipe and top support of M.S. plate of 250X250mm Squire 8mm thickness is welded top. Torque steel is used to support center pipe. Height of stool is 3ft.
9) Foundation plate made up of M.S 250X2S0mm square With 8mm thick.
10) Total 03 foundation stools are used which are connected to each other in single piece.
11) Foundation stool is embedded in C.C. stock below ground level
12) Coating - best quality of powder coating 80-100 micron.
13) Safety Instructions and Exercise chart - Made From Aluminum/stainless steel stick on product.
1
-
-
... More
Push UP Bar
Providing and fixing 'Push Up Bar' manufactured by combination of mild steel and all-season artificial wood to seek eco-friendly greenery effect.
Dimensions: (L X W X H)= 1250X540X1530mm. 1) Main Frame Cover - Completely covered top to bottom with all-season artificial wood, outer size 120X120mm, 100X100mm inner area to accommodate square tube shape which is completely molded in one single piece. 2) Main Frame - Consist 91X91x2.5mm Thickness Square Tube get maximum internal strength to structure. 3) Main Frame Connecting pipe - 91X91x2.5mm Thickness G.l Square Tube 4) Push up Bar Hand Rail- 33 OD "B" Class Gl pipe. Duly Bend. Attached 5 mm thick MS Plate For Demountable system
5) Main Pipe Top Closing cap's- Decent Design Size 120X120 PP/HDPE/MS. Material 6) Main Frame Bottom protective cover-Decent Design PP/HDPE material. 7) Nut & Bolts Closing Caps- All Nut 8t Bolt Closing caps made from PP/HDPE/SS 8) Foundation stool: Made from main pipe 91x91x2mm pipe and top support of M.S. plate of 250X250mm Squire 8mm thickness is welded top. Torque steel is used to support center pipe. Height of stool is 3ft.
9) Foundation plate -M.S 250X2S0mm Square With 8mm thick. 10) Foundation stool is embedded in C.C. stock below ground level 11) Coating - best quality of powder coating 80-100 micron. 12) Safety Instructions and Exercise chart - Made From Aluminum/stainless steel stick on product
1
-
-
... More
Leg Stretching
Providing and fixing 'Leg Stretching' manufactured by combination of mild steel and all-season artificial wood to seek eco-friendly greenery effect.
Dimensions: (L X W X H)= 1696X415X1520mm.
1) Main Frame Cover • Completely covered top to bottom with all-season artificial wood, outer size 120X120mm, 100X100mm inner area to accommodate square tube shape which is completely molded in one single piece.
2) Main Frame - Consist 91X91x2.5mm Thickness Square Tube get maximum internal strength to structure.
3) Leg Stretching Frame- Made By 33 OD "B" Class Gl pipe Duly Bend. Attached 5 mm thick MS Plate for Demountable system
4) Main Pipe Top Closing cap's- Decent Design Size 120X120 PP/HDPE/MS. Material
5) Main Frame Bottom protective cover-Decent Design PP/HDPE material.
6) Nut & Bolts Closing Caps- All Nut & Bolt Closing caps made from PP/HDPE/SS
7) Foundation stool: Made from main pipe 91x91x2mmpipe and top support of M.S. plate of 250X250mm Squire 8mm thickness is welded top. Torque steel is used to support center pipe. Height of stool is 3ft.
8) Foundation plate -M.S 250X250mm Square with 8mm thick.
9) Foundation stool is embedded in C.C. stock below ground level
10) Coating - best quality of powder coating 80-100 micron.
11) Safety instructions and Exercise chart - Made from Aluminum/stainless-steel stick-on product
1
-
-
... More
Air Walker
Providing and fixing Air walker made from G.l. pipe. Dimensions: (L X W X H)= 1190X380X1244mm
1. Main Frame- 88mm OD "B" class Gl pipe dually bending design.
2. Foundation plate -M.S. round plate of 0 250mm & 8mm thick.
3. Paddle-42mm OD round Gl pipe.
4. Handle-33mm OD "B" class GI pipe.
5. Footrest- cast iron 124X296X5mm thick and M.S. plate of 2mm thick use to support it.
6. Top Closing cap - dome shape made by PP/NYLON/HDPE material.
7. Closing cap’s- PP/NYLON/HDPE material.
8. Bracket- 8mm thick laser profile is use to support paddle frame.
9. Foundation stool: Made from main pipe 88 mm OD M.S pipe and top support of M.S. round plate of 250 mm & 8mm thickness is welded top. Square tube of 30x30x2 mm is use for to support center pipe. Height of stool is 3ft.
Foundation stool is embedded in CC. stock below ground level.
Bearing- use is 6005 permanent lubricated reputed brands.
Pins - 25mm M.S. bright bar pin.
Circlips- A 24 circlips are used for assembly.
Bearing bushes -60mm OD seamless pipe.
Coating - best quality of powder coating 80-100 micron.
Safety Instructions and Exercise chart - start & finish position stick on product
1
-
-
... More
Chest Press Double
Providing and fixing chest press Double made from G.l. pipe. Dimensions: (L X W X H)= 1955X710X1900mm.
1. Main center pipe- - 114 mm OD "B" class Gl pipe.
2. Foundation plate -M.S. round plate of 0 250mm & 8 mm thick.
3. Foundations cover cap- dome shape of PP/NYLON/HDPE material.
4. Remaining frame- made up of 48mmOD "B" Class G.l. pipe.
5. Handle - Made up of 48mm OD "B" Class G.l. pipe.
6. Link - made up of 048mmOD "B" Class G.l. pipe.
7. Seat & back rest - 360 X 300X 2mm thick M.S. seat with corner fillet for safety.
8. Bearing bush Closing cap's- PP/NYLON/HDPE material.
9. Handle is connected with frame by 8 MM laser cutting MS profile
10. Top Closing cap - dome shape made by PP/NYLON/HDPE material.
11. Foundation stool: Made from main pipe 88 mm OD M.S pipe and top support of M.S. round plate of 250 mm & 8mm thickness is welded top. Square tube of 30x30x2 mm is use for to support center pipe. Height of stool is 3ft.
Foundation stool is embedded in C.C. stock below ground level.
Bearing - Use is 6005 permanent lubricated reputed brand.
Bearing bushes - 60mm OD seamless pipe.
Pin - Made of 25mm M.S. bright bar.
Grips - High quality rubber 46mm OD.
Circlips - A 24 circlips are used for assembly.
Coating - best quality of powder coating 60 to 70 micron
Safety instructions and Exercise chart - start &finish position stick on product
1
-
-
... More
Triple Twister
Providing and fixing Triple Twister (Standing position-2 and Seating position-l) made from G.l. pipe. Dimensions: (L X W X H) 1500X1500X1420mm.
1. Main frame- 114 mm OD "B" class Gl pipe.
2. Foundation plate -M.S. round plate of 250mm 8t 8 mm thick.
3. Seat plate support - 60 mm OD "B" Class G.l Pipe.
4. Seating ring - 33 mm OD "B" Class G.l Pipe made by rolling.
5. Seating ring support - 33 mm OD "B" Class G.l Pipe.
6. Remaining frame - Is made by 100x50x2.5mm rectangular pipe.
7. Standing plate- 300mm OD X 10mm thick M.S. plate.
8. Seating plate- 300mm OD X 10mm thick M.S. plate.
9. Seating seat position and other two standing position plates are fixed 120 degrees each from other.
10. Handle- 33mm "B" Class G.i. Pipe made by rolling.
11. Top Closing cap - Dome shape made by PP/NYLON/HDPE material.
12. Foundation stool: Made from main pipe 88 mm OD M.S pipe and top support of MS. round plate of 250 mm & 8mm thickness is welded top. Square tube of 30x30x2 mm is use for to support center pipe. Height of stool is 3ft.
Foundation stool is embedded in C.C. stock below ground level.
Bearing - Used is 6005 permanent lubricated reputed brand.
Bearing bushes - 60mm OD seamless pipe.
Pin-Made up of 25mm M.S. bright bar.
Circlips- A 24 circlips are used for assembly.
Coating - best quality of powder coating 80-100 micron.
Safety Instructions and Exercise chart - start & finish position stick on product.
1
-
-
... More
Horse Rider
Providing and fixing Horse Rider made from G.I. pipe. Dimensions: (L X W X H)= 1140X400X1400mm.
1. Main frame - 114 mm OD "B" class Gl pipe.
2. Foundation plate - M.S. round plate of 250mm & 8mm thick.
3. Foundation cover cap - dome shape of PP/NYLON/HDPE material.
4. Remaining frame - Is made by 48 mm OD "B" class Gl pipe.
5. Seat frame - Is made by 48 mm OD "B" class Gl pipe.
6. Seat position must be horizontal to 110-120 degree.
7. Link - made up of 48mm OD "B" Class G.I. pipe. Angle between is link and ground position is 10-20 degree.
8. Handle - 33 mm OD "B" Class Gl pipe.
9. Paddle vertical support- 60 mm OD "B" Class Gl pipe.
10. Handle frame- 42mm OD "B" Class Gl pipe dually bending design.
11. Foot pipe - 33 mm OD "B" Class Gl pipe.
12. Support frame -10 mm thick MS flat is used.
13. Seat - 5mm thick MS laser cutting profile is used.
14. Bearing bush closing cap - PP/NYLON/HDPE material.
15. Foundation stool: Made from main pipe 88 mm OD M.S pipe and top support of M.S. round plate of 250 mm & 8mm thickness is welded at top. Square tube of 30x30x2 mm is use for to support center pipe. Height of stool is 3ft.
Foundation stool is embedded in C.C. stock below ground level.
Bearing - Use is 6005 permanent lubricated reputed brand.
Bearing bushes - 60mm OD seamless pipe.
Pin - Made of 25mm M.S. bright bar.
Grips - High quality rubber 46mm OD.
Circlips - A 24 circlips are used for assembly.
Coating - best quality of powder coating 60 to 70 micron
Safety instructions and Exercise chart - start &finish position stick on product.
1
-
-
... More
Leg Press Double
Providing and fixing Leg Press Double made from G.I. pipe. Dimensions: (L X W X H)= 1676X400X1500mm.
1. Main frame-114 mm OD "B" class Gl pipe.
2. Foundation plate - M.S. round plate of 250mm & 8mm thick.
3. Foundations cover cap - dome shape of PP/NYLON/HDPE material.
4. Link - is 60mm OD "B" Class Gl pipe.
5. Seat frame - 42mm OD "B" Class Gl pipe.
6. Leg Press back rest should be angled in 120-130 degree.
7. Foot rest- cast iron 124X296X5mmthick and M.S plate of 2mm thick use to support it.
8. Seat- 360X300X 2mm thick M.S. seat with corner fillet for safety.
9. Link connected with frame by 8 MM thick laser cutting MS profile.
10. Top Closing cap - dome shape made by PP/NYLON/HDPE material.
11. Closing cap’s- PP/NYLON/HDPE material.
12. Foundation stool: Made from main pipe 88 mm OD M.S pipe and top support of M.S. round plate of 250 mm & 8mm thickness is welded at top.Square tube of 30x30x2 mm is use for to support center pipe.Height of stool is 3ft.
Foundation stool is embedded in C.C. stock below ground level.
Bearing- use is 6005 permanent lubricated reputed brand.
Pin- 25mm M.S. bright bar pin.
Bearing bushes60mm OD seamless pipe.
Circlip- A 24 circlips are used for assembly.
Coating - best quality of powder coating 80-100 micron.
1
-
-
... More
Rower
Providing and fixing Rower made from G.l. pipe. Dimensions: (L X W X H)= 1472X915X1040mm.
1. Upper and bottom pipes- 088mm OD "B" Class Gl pipe.
2. Foundation plate-M.S. round plate of 250mm & 8mm thick.
3. Handle- 33mm OD "B" Class G.l pipe.
4. Angle between handle and horizontal surface is 75-80 degree.
5. Linkages-48mm OD "B" Class G.l. pipe.
6. Seat - 360 X 300 X 2mm thick M.S. seat with corner fillet for safety.
7. Foot resting pipe- 60 OD "B" Class G.l. pipe.
8. End Closing cap - dome shape made by PP/NYLON/HDPE material.
9. Closing caps - PP/NYLON/HDPE material.
10. Foundation stool: Made from main pipe 88 mm OD M.S pipe and top support of M.S. round plate of 250 mm & 8mm thickness is welded at top. Square tube of 30x30x2 mm is use for to support center pipe. Height of stool is 3ft.
Foundation stool is embedded in C.C. stock below ground level.
Pin - 25mm M.S. bright bar pin.
Circlips- A 24 circlips are used for assembly.
Bearing bushes- 60mm OD seamless pipe/Bar.
Bearing- use is 6005 permanent lubricated reputed brands.
Grips - high quality rubber 46mm OD.
Coating - best quality of powder coating 80-100 micron.
Safety Instructions and Exercise chart - start & finish position stick on product.
1
-
-
... More
Seated Puller Double
Providing and fixing Seated puller double made from G.l. pipe. Dimensions: (L X W X H)= 1955X660X1955mm.
1. Main center pipe-114 mm OD "B" class Gl pipe.
2. Foundation plate -M.S. round plate of 250mm & 8 mm thick.
3. Foundations cover cap- dome shape of PP/NYLON/HDPE material.
4. Remaining frame- made up of 48mm OD "B" Class G.l. pipe.
5. Handle - Made up of 48 mm OD "B" Class G.l. pipe.
6. Seat - 360 X 300 X 2mm thick M.S. seat with corner fillet for safety.
7. Handle Is connected with frame by 8 MM laser cutting MS profile.
8. Top Closing cap - dome shape made by PP/NYLON/HDPE material.
9. Closing cap's - PP/NYLON/HDPE material.
10. Foundation stool: Made from main pipe 88 mm OD M.S pipe and top support of M.S. round plate of 250 mm & 8mm thickness is welded top. Square tube of 30x30x2 mm is use for to support center pipe Height of stool is 3ft.
Foundation stool is embedded in C.C. stock below ground level.
Bearing- Use is 6005 permanent lubricated reputed brands.
Pin- Made up of 0 25mm M.S. bright bar pin.
Bearing bushes - 60mm OD seamless pipe. Grips- High quality rubber 46mm OD.
Cirdips-A 24 circlips are used for assembly.
Coating - best quality of powder coating 80-100 micron.
Safety Instructions and Exercise chart - start & finish position stick on product
1
-
-
... More
Shoulder Builder Double
Providing and fixing Shoulder Builder Double made from G.l. pipe. Dimensions: (L X W X H)= 890X558X1500mm.
1. Main frame- Made from 114 mm OD "B" Class G.l. pipe.
2. Foundation plate -M.S. round plate of 250 mm & 8mm thick.
3. Foundation cover cap - dome shape of PP/NYLON/HDPE material.
4. Shoulder ring pipe- 33 mm OD "B" Class G.l Pipe
5. Shoulder ring pipe support - 25 mm OD "B" Class G.i Pipe.
6. Nylon knob with Bearing - Is fixed on shoulder ring pipe for rotating purpose.2 set to be fixed in a position for kids and adults.
7. Top Closing cap's- PP/NYLON/HDPE material..
8. Closing cap- PP/NYLON/HDPE material.
9. Foundation stool: Made from main pipe 88 mm OD M.S pipe and top support of M.S. round plate of 250 mm & 8mm thickness is welded at top. Square tube of 30x30x2 mm is use for to support center pipe. Height of stool is 3ft.
Foundation stool is embedded in C.C. stock below ground level.
Bearing - Use is 6005 permanent lubricated reputed brands.
Pin- 25 mm M.S. Foundation plate -M.S. round plate of 250 mm & 8mm thick.
Bearing bushes-60 mm OD seamless pipe.
Circlips - A 24 circlips are used for assembly.
Coating - best quality of powder coating 80-100 micron.
Safety Instructions and Exercise chart - start & finish position stick on product.
1
-
-
... More
Sit Up Board
Providing and fixing Sit Up Board made from G.I. pipe. Dimensions: (L X W X H)= 1570X450X660mm.
1. Main frame - made from 33 OD "B" Class G.I. pipe bending design.
2. Foundation plate -M.S. round plate of 250mm & 8 mm thick.
3. Leg Support- 60mm OD "B" Class G.I Pipe.
4. Remaining Frame - 60 mm OD "B" Class GI pipe and 100X50 MS pipe.
5. Backrest Seat- made of M.S Checkered Plate Sheet of 3 mm thickness size 1100mm x 310 mm.
6. Foundation stool: Made from main pipe 88 mm OD M.S pipe and top support of M.S. round plate of 250 mm & 8mm thickness is welded top. Square tube of 30x30x2 mm is use for to support center pipe. Height of stool is 3ft.
Foundation stool is embedded in C.C. stock below ground level.
Coating - best quality of powder coating 80-100 micron.
Safety Instructions and Exercise chart - start & finish position stick on product
1
-
-
... More
Sky Walker
Providing and fixing Sky Walker made from G.I. pipe. Dimensions:(LX W X H)= 1720X910X1700mm.
1. Main frame- Made of 8 8mm OD "B" class 61 pipes dually bending design.
2. Foundation plate - M.S. round plate of 250mm 8t 8 mm thick.
3. Paddle vertical support - 42mm OD "B" Class Gl pipe.
4. Handle- 33mm OD “B" Class Gl pipe dually bending design.
5. Leg movement frame- 50mm X50mm X2mm thick square pipe.
6. Footrest - cast iron 124X296X5mm thick and M.S. plate of 2mm thick use for to support it.
7. Top Closing cap - dome shape made by PP/NYLON/HDPE material.
8. Closing cap's- PP/NYLON/HDPE material.
9. Foundation stool: Made from main pipe 88 mm M.S pipe, and top support of M.S. round plate of 250 mm & 8mm thickness is welded top. Square tube of 30x30x2 mm is use for to support center pipe. Height of stool is 3ft.
Foundation stool is embedded in C.C. stock belowground level.
Grips - High quality rubber 46mm OD. Bearing- Use is 6005 permanent lubricated reputed brand. Bearing bushes - 60mm OD seamless pipe. Pin -Made of 25mm M.S. bright bar. Circlips - A 24 circlips are used for assembly. Coating - best quality of powder coating 80-100 micron. Safety Instructions and Exercise chart - start & finish position stick on product.
1
-
-
... More
Surf Board
Providing and fixing Surf Board made from G.I. pipe. Dimensions: (L X W X H)= 1090X890X1390mm.
1. Main frame -Made from two pipes of 114 mm OD "B" class Gl pipe.
2. Foundation plate-M.S. round plate of 250mm & 8mm thick.
3. Connecting pipe - 88 mm OD "B" class Gi pipe is used to connect both main frame pipes at top end and 42 mm pipe is used to connect at bottom end.
4. Handle- 42mm and 33 OD "B" Class Gl pipe.
5. Support pipe - 0 60 mm is use to support leg movement frame.
6. Leg movement frame- 42mm OD "B'1 Class Gl pipe
7. Footrest - cast iron 325X270X8mm thick and M.S. plate of 250x200x2mm thick use for to support it.
8. Bracket- 8mm thick laser profile is use to support leg movement frame.
9. Top Closing cap - dome shape made by PP/NYLON/HDPE material.
10. Closing cap's- PP/NYLON/HDPE material.
11. Foundation stool: Made from main pipe 88 mm OD M.S. pipe and top support of M.S. round plate of 250 mm & 8mm thickness is welded at top. Square tube of 30x30x2 mm Is use for to support center pipe. Height of stool Is 3ft.
Foundation stool is embedded in C.C. stock below ground level.
Grips - High quality rubber 46mm OD.
Bearing - Use is 6005 permanent lubricated reputed brand.
Bearing bushes - 60mm OD seamless pipe.
Pin - Made of 25mm M.S. bright bar.
Circlips - A 24 circlips are used for assembly.
Coating - best quality of powder coating 80-100 micron.
Safety Instructions and Exercise chart - start 8t finish position stick on product.
1
-
-
... More
Exer Cycle Providing and fixing Exer Cycle made from G.l. pipe. Dimensions: (L X W X H)= 1340X710X1190mm. 1. Main Frame-100mmX50mmX2.5mm rectangular CR pipe with bending design. 2. Foundation plate -M.S. round plate of 250mm & 8mm thick. 3. Handle- 033mm OD "B" Class Gl Round pipe dully bending design. 4. Side and top cover -1.6 mm thick MS laser cutting profile is used. 5. Seat- 5mm thick MS laser cutting profile is used. 6. Paddle-100mmX50mm capsule pipe and 40x16 mm MS flat is use for connecting the paddle and shaft.
7. Closing cap's- PP/NYLON/HDPE material. 8. Foundation stool: Made from main pipe 88 mm OD M.S pipe and top support of M.S. round plate of 250 mm & 8mm thickness is welded top. Square tube of 30x30x2 mm is use for to support center pipe. Height of stool is 3ft. Foundation stool is embedded in C.C. stock below ground level.
Bearing bushes - 60mm OD seamless pipe. Bearing- Use is 6005 permanent lubricating sealed reputed brand. Shaft -Made up of 25mm OD MS Bright bar. Circlips- A 24 circlips are used for assembly.
Coating - best quality of powder coating 80-100 micron. Safety Instructions and Exercise chart - start & finish position stick on product.
1
-
-
... More
Standing and Seating Twister
Providing and fixing Standing and Seating Twister made from G.l. pipe. Dimensions: (L X W X H)= 1820X480X1270mm.
1. Main frame- 114 mm OD "B" class Gl pipe.
2. Foundation plate -M.S. round plate of 250mm & 8 mm thick.
3. Seat plate support - 60 mm OD "B” Class G.l Pipe.
4. Seating ring - 33 mm OD "B" Class G.l Pipe made by roiling.
5. Seating ring support - 33 mm OD "B” Class G.l Pipe.
6. Remaining frame - Is made by 100x50x2.5mm rectangular pipe.
7. Standing plate- 300mm OD X 10mm thick M.S. plate.
8. Seating plate- 300mm OD X 10mm thick M.S. plate.
9. Handle- 33mm "B" Class G.l. Pipe made by rolling.
10. Top Closing cap - Dome shape made by PP/NYLON/HDPE material.
11. Foundation stool: Made from main pipe 88 mm OD M.S pipe and top support of M.S.round plate of 250 mm & 8mm thickness is welded top. Square tube of 30x30x2 mm is use for to support center pipe.. Height of stool is 3ft.
Foundation stool is embedded in C.C. stock below ground level.
Bearing - Used is 6005 permanent lubricated reputed brand.
Bearing bushes - 60mm OD seamless pipe.
Pin - Made up of 25mm M.S. bright bar.
Circlips- A 24 circlips are used for assembly.
Coating - best quality of powder coating 80-100 micron.
Safety Instructions and Exercise chart - start 8(finish position stick on product.
1
-
-
... More
Multi -Functional Trainer
Providing and fixing Multi-Functional Trainer made from G.i. pipe. Dimensions (L X W X H)= 1390X660X2600mm.
1. Mainframe- 88mm OD "B" class Gl pipe.
2. Foundation plate - M.S. round plate of 250mm & 8mm thick.
3. Back support- 42mm OD round Gt pipe.
4. Leg riser support pipe- 100X50X2.5mm thick rectangle pipe.
5. Dipping handle- 33mm OD "B" Class G.I. Pipe.
6. Pushup handle- 42 OD "B" Class Gl pipe.
7. Chin-up support - 60mm OD " B" Class G.I. Pipe.
8. Chin-up handle - 25mm OD MS bar with knurling.
9. Grips - high quality rubber 46 mm OD.
10. Top closing cap-PP/NYLON/HDPE material.
11. Flat - 50x10mm flat is used for connecting main frame.
12. Foundation stool: Made from main pipe 88 mm OD M.S pipe and top support of M.S.round plate of 250 mm & 8mm thickness is welded top. Square tube of 30x30x2 mm is use for to support center pipe. Height of stool is 3ft.
Foundation stool is embedded in C.C. stock below ground level.
Coating - best quality of powder coating 80-100 micron.
Safety Instructions and Exercise chart - start &finish position stick on product.
1
-
-
... More
Bench with Fixed Weight
Providing and fixing Bench with Fixed Weight made from G.I. pipe.
Dimensions: (L X W X H)= 1190X1190X1290mm.
1. Mainframe-Made from 60 OD "B" Class mm G.I. pipe.
2. Foundation plate -M.S. round plate of 250mm & 8mm thick.
3. Backrest frame-Made from 48 OD"B" Class mm G.I. pipe.
4. Bottom support pipe - 50X25X2.5mm thick rectangle pipe.
5. Fixed weight- made from SS 202 Stainless Steel tube and 5kg casting round plate is attached at both end of bar.
6. Backrest Seat- made of M.S Checkered Plate Sheet of 3 mm thickness size 1150mm x 305mm.
7. MS Flat 50x10- is used for connecting main frame and backrest frame.
8. Top Closing cap's- M.S. cap is used.
9. Foundation stool: Made from main pipe 88 mm OD M.S pipe and top support of M.S. round plate of 250 mm & 8mm thickness is welded top. Square tube of 30x30x2 mm is use for to support center pipe. Height of stool is 3 ft. Foundation stool is embedded in C.C. stock below ground level. Locking chain: Used to connect fixed weight with main frame.
Coating - best quality of powder coating 80-100 micron. Safety instructions and Exercise chart – start & finish position stick on product.
1
-
-
... More
Bench with Fixed Dumbbells
Providing and fixing Bench with Fixed Dumbbells made from G.I. pipe. Dimensions: (L X W X H)= 1650X960X810mm.
1. Main frame- Made from 48 OD "B" Class mm G.I. pipe.
2. Foundation plate-M.S. round plate of 250mm & 8mm thick.
3. Dumbbell supporting frame - Made from 48 OD"B" Class mm G.I pipe.
4. Seating frame- 50x25x2 mm thickness rectangular pipe is used.
5. Fixed weight- made from SS 202 Stainless Steel tube and 5kg casting round plate weight is attached at both end of bar.
6. 8mm laser cut M.S. profile- Is use for connecting the dumbbell frame and main frame.
7. Footrest- 50x25x2 mm thickness rectangular pipe is used.
8. Foundation stool: Made from main pipe 88 mm OD M.S pipe and top support of M.S. round plate of 250 mm & 8mm thickness is welded top. Square tube of 30x30x2 mm is use for to support center pipe. Height of stool is 3 ft.
Foundation stool is embedded in C.C. stock below ground level.
Coating - best quality of powder coating 80-100 micron.
Safety Instructions and Exercise chart - start & finish position stick on product.
1
-
-
... More
Back Extension
Providing and fixing Back Extension made from G.l. pipe.
Dimensions: (L X W X H)= 1060X730X990mm.
1. Main frame* Made from 88 OD "B" Class mm G.l. pipe.
2. Foundation plate -M.S. round plate of 250mm & 8mm thick.
3. Leg Support - 42mm OD "B" G.l Pipe.
4. Seat rest pipe - 42mm OD "B" Class G.l Pipe.
5. Handle pipe - 33mm OD "B" Class G.l Pipe.
6. Footrest- Cast iron 124X296X5mm thick and M.S plate of 3mm thick used to support it.
7. Footrest pipe - 42mm OD "8" Class G.l Pipe and 80x40 mm MS rectangular pipe.
8. Closing cap - PP/NYLON/HDPE material.
9. Seat - 360 X 300 X 2mm thick M.S. seat with corner fillet for safety.
10. Grips - High quality rubber 46 mm OD.
11. Foundation stool: Made from main pipe 88 mm OD M.S pipe and top support of M.S. round plate of 250 mm & 8mm thickness is welded top. Square tube of 30x30x2 mm is use for to support center pipe. Height of stool is 3ft.
Foundation stool is embedded in C.C. stock below ground level.
Coating - best quality of powder coating 80-100 micron.
Safety Instructions and Exercise chart - start & finish position stick on product
1
-
-
... More
Chest Press Single
Providing and fixing chest press Single made from G.l. pipe. Dimensions: (L X W X H)= 1625X660X1880mm.
1. Main center pipe- - 114 mm OD "B" class Gl pipe.
2. Foundation plate -M.S. round plate of 250mm & 8 mm thick.
3. Foundations cover cap- dome shape of PP/NYION/HDPE material.
4. Remaining frame- made up of 48mmOD "B" Class G.l. pipe.
5. Handle - Made up of 48mm OD "B" Class G.l. pipe.
6. Link - made up of 48mmOD "B" Class G.l. pipe.
7. Seat & back rest - 360 X 300X 2mm thick M.S. seat with corner fillet for safety.
8. Bearing bush Closing cap's- PP/NYLON/HDPE material.
9. Handle is connected with frame by 8 MM laser cutting MS profile.
10. Top Closing cap - dome shape made by PP/NYLON/HDPE material.
11. Foundation stool: Made from main pipe 88 mm OD M.S pipe and top support of M.S.round plate of 250 mm & 8mm thickness is welded top. Square tube of 30x30x2 mm is use for to support center pipe. Height of stool is 3ft.
Foundation stool is embedded in C.C. stock below ground level.
Bearing- Use is 6005 permanent lubricated reputed brands.
Pin - Made up of 25mm M.S. bright bar pin. Bearing bushes - 60mm OD seamless pipe. Grips - High quality rubber 46mm OD.
Circlips-A 24 circlips are used for assembly.
Coating - best quality of powder coating 80-100 micron.
Safety Instructions and Exercise chart - start & finish position stick on product.
1
-
-
... More
Instruction Board
Dimensions: (L X W X H)= 990X430X2440mm.
Instruction board made up of "B" class G.l. Pipe of different NB. Nominal Bore size i.e. internal diameter of pipe in millimeters.
40mm NB: Center pipe, foundation main frame.
The instruction board is made up of ACP (Aluminum Composite Panel) with thickness of 3mm. M.S. Angle 23 x 23 x 1.8mm foundation support frame.
M.S Pipe 40 x 20 x 1.8mm foundation main frame.
Nut and Bolt - High tensile steel with galvanized nut and bots are used. Powder Coating - best quality of powder coating 80-100 micron.
1
-
-
... More
Double Twister Standing
Providing and fixing Double Twister Standing made from G.l. pipe. Dimensions: (L X W X H)= 1820X480X1270mm.
1. Main frame- 114 mm OD "B’’ class Gl pipe.
2. Foundation plate -M.S. round plate of 0 250mm 8t 8 mm thick.
3. Seat plate support - 60 mm OD "B" Class G.l Pipe.
4. Standing ring - 33 mm OD "B" Class G.l Pipe made by rolling.
5. Standing ring support - 33 mm OD "B" Class G.i Pipe.
6. Remaining frame - Is made by 100x50x2.5mm rectangular pipe.
7. Standing plate- 300mm OD X 05mm thick M.S. plate.
8. Handle- 33mm “B" Class G.i. Pipe made by rolling.
9. Top Closing cap - Dome shape made by PP/NYLON/HDPE material.
10. Foundation stool: Made from main pipe 88 mm OD M.S pipe and top support of M.S.round plate of 250 mm & 8mm thickness is welded top. Square tube of 30x30x2 mm is use for to support center pipe.. Height of stool is 3ft.
Foundation stool is embedded in C.C. stock below ground level.
Bearing - Used is 6005 permanent lubricated reputed brand.
Bearing bushes - 50mm OD seamless pipe.
Pin - Made up of 25mm M.S. bright bar.
Circlips- A 24 circlips are used for assembly.
Coating - best quality of powder coating 80-100 micron.
Safety Instructions and Exercise chart - start & finish position stick on product
1
-
-
... More
Push Up Bar
Providing and fixing Push Up Bar made from G.I. pipe. Dimensions: (L X W X H)= 1220X530X1500mm.
1. Main frame- 88 mm OD "B" class Gl pipe.
2. Leg & Hand Support- 33 mm OD "8" class Gl pipe.
3. Foundation plate-M.S. round plate of 250mm & 8 mm thick.
4. Top Closing cap - Dome shape made by PP/NYLON/HDPE material.
5. Closing cap's-Plastic molded.
6. Foundation stool: Made from main pipe 88 mm OD M.S pipe and top support of M.S.round plate of 250 mm & 8mm thickness is welded top. Square tube of 30x30x2 mm is use for to support center pipe.. Height of stool is 3ft.
Foundation stool is embedded in C.C. stock below ground level.
Coating - best quality of powder coating 80-100 micron.
Safety Instructions and Exercise chart - start & finish position stick on product
1
-
-
... More
Tai chi Spinner
Providing and fixing Tai chi Spinner made from G.I. pipe. Dimensions: (L X W X H)= 1200X680X1370mm.
1. Main frame- Made from 114 mm OD "B" Class G.I. pipe.
2. Foundation plate -M.S. round plate of 250 mm & 8mm thick.
3. Foundation cover cap - dome shape of PP/NYLON/HDPE material.
4. Thai chi ring pipe- 33 mm OD "B" Class G.I Pipe.
5. Thai chi ring pipe support - 25 mm OD "B" Class G.I Pipe.
6. Nylon knob with Bearing - Is fixed on shoulder ring pipe for rotating purpose.
7. Top Closing cap's- PP/NYLON/HDPE material..
8. Closing cap- PP/NYLON/HDPE material.
9. Foundation stool: Made from main pipe 88 mm OD M.S.pipe and top support of M.S.round plate of 250 mm & 8mm thickness is welded at top. Square tube of 30x30x2 mm is use for to support center pipe. Height of stool is 3ft.
Foundation stool is embedded in C.C. stock below ground level.
Bearing - Use is 6005 permanent lubricated reputed brand.
Pin-25 mm M.S.
Foundation plate -M.S. round plate of 250 mm & 8mm thick.
Bearing bushes-60 mm OD seamless pipe.
Circlips - A 24 circlips are used for assembly.
Coating - best quality of powder coating 80-100 micron.
Safety Instructions and Exercise chart - start & finish position stick on product
1
-
-
... More
Three in One Combo Unit Chest press/Air walker/Seated Puller. Providing and fixing Three in One Combo Unit made from G.I. pipe. Dimensions: (L X W X H)= 2740X710X2130mm.
1. Main center pipe- 114 mm OD "B" class Gl pipe,
2. Main pipe - Air walker 88mm OD "B" class GJ pipe dually bending design.
3. Foundation plate-M.S. round plate of 250mm & 8 mm thick.
4. Foundations cover cap- dome shape of PP/NYLON/HDPE material.
5. Remaining frame- made up of 48mm OD "B" Class G.I. pipe
6. Handle - Made up of 48 and 33 mm OD "B" Class G.l. Pipe.
7. Paddle - 42mm OD round Gl pipe.
8. Seat - 360 X 300 X 2mm thick M.S. seat with corner fillet for safety.
9. Footrest- cast iron 124X296X5mm thick and M.S. plate of 2mm thick use to support it.
10. Handle Is connected with frame by 8 MM laser cutting MS profile.
11. Bracket - 8mm thick laser profile is use to support paddle frame.
12. Top Closing cap - dome shape made by PP/NYLON/HDPE material;
13. Closing cap's - PP/NYLON/HDPE material..
14. Foundation stool: Made from main pipe 88 mm OD M.S.pipe and top support of M.S.round plate of 250 mm & 8mm thickness is welded top. Square tube of 30x30x2 mm is use for to support center pipe Height of stool is 3ft.
Foundation stool is embedded in C.C. stock below ground level.
Bearing- Use is 6005 permanent lubricated reputed brand.
Pin- Made up of 25mm M.S. bright bar pin.
Bearing bushes - 60mm OD seamless pipe.
Grips - High quality rubber 46mm OD.
Circlips-A 24 circlips are used for assembly.
Coating - best quality of powder coating 80-100 micron.
Safety Instructions and Exercise chart - start & finish position stick on product.
1
-
-
... More
Four in One Combo Unit Seating Twister/ Standing Twister /Leg Press /Air walker.
Providing and fixing Four in One Combo Unit made from G.l. pipe.
Dimensions: (L X W X H)= 2740X1500X2130mm. 1. Main center pipe- 114 mm OD "B" class Gl pipe.
2. Main pipe - Air walker 88mm OD "B" class Gl pipe dually bending design.
3. Foundation plate -M.S. round plate of 250mm & 8 mm thick.
4. Foundations cover cap- dome shape of PP/NYLON/HDPE material.
5. Remaining frame- made up of 48mm OD "B" Class G.l. pipe.
6. Handle - Made up of 48 and 33 mm OD "B" Class G.l. Pipe.
7. Paddle - 42mm OD round G l pipe.
8. Seat -360 X 300 X 2mm thick M.S. seat with corner fillet for safety.
9. Footrest- cast iron 124X296X5mm thick and M.S. plate of 2mm thick use to support it.
10. Handle is connected with frame by 8 MM laser cutting MS profile
11. Bracket - 8mm thick laser profile is use to support paddle frame.
12. Top Closing cap- dome shape made by PP/NYLON/HDPE material.
13. Closing cap's - PP/NYLON/HDPE material..
14. Foundation stool: Made from main pipe 88 mm OD M.S.pipe and top support of M.S.round plate of 250 mm 8t 8mm thickness is welded top. Square tube of 30x30x2 mm is use for to support center pipe Height of stool is 3ft.
Foundation stool is embedded in C.C. stock below ground level.
Bearing- Use is 6005 permanent lubricated reputed brand.
Pin- Made up of 25mm M.S. bright bar pin.
Bearing bushes - 60mm OD seamless pipe.
Grips - High quality rubber 46mm OD.
Circlips-A 24 circlips are used for assembly.
Coating - best quality of powder coating 80-100 micron.
Safety Instructions and Exercise chart - start & finish position stick on product.
1
-
-
... More
Cross Trainer Single.
Providing and fixing Cross Trainer Single made from 6.1. pipe. Dimensions: (L X W X H)= 1140XSSOX1650mm.
1. Main frame- Made of 88mm OD "B" class Gl pipe dually bending design.
2. Foundation plate - M.S. round plate of 250mm & 8 mm thick.
3. Paddle vertical support - 42mm OD "B" Class Gl pipe.
4. Handle- 33mm OD “B" Class Gl pipe dually bending design.
5. Leg movement frame- 50mm X50mm X2mm thick square pipe.
6. Footrest - cast iron 124X296X5mm thick and M.S. plate of 2mm thick use for to support it.
7. Top Closing cap - dome shape made by PP/NYLON/HDPE material.
8. Closing cap's- PP/NYLON/HDPE material.
9. Foundation stool: Made from main pipe 88 mm OD M.S. pipe, and top support of M.S. round plate of 250 mm & 8mm thickness is welded top. Square tube of 30x30x2 mm Is use for to support center pipe. Height of stool is 3ft.
Foundation stool is embedded in C.C. stock below ground level.
Grips - High quality rubber.
Bearing- Use is 6005 permanent lubricated reputed brand.
Bearing bushes - 60mm OD seamless pipe. Pin -Made of 25mm M.S. bright bar.
Circlips - A 24 circlips are used for assembly.
Coating -best quality of powder coating 80-100 micron.
Safety Instructions and Exercise chart - start & finish position stick on product.
1
-
-
... More
Cross Trainer Double Providing and fixing Cross Trainer Double made from G.l. pipe. Dimensions: (L X W X H)= 2280X550X1650mm. 1. Main frame- Made of 88mm OD "B" class 61 pipe dually bending design. 2. Foundation plate-M.S. round plate of 250mm & 8 mm thick. 3. Paddle vertical support - 42mm OD "B" Class Gl pipe. 4. Handle- 33mm OD "B" Class 61 pipe dually bending design. 5. Leg movement frame- 50mm X50mm X2mm thick square pipe. 6. Footrest - cast iron 124X296X5mm thick and M.S. plate of 2mm thick use for to support it. 7. Top Closing cap - dome shape made by PP/NYLON/HDPE material. 8. Closing cap's- PP/NYLON/HDPE material. 9. Foundation stool: Made from main pipe 88 mm OD B class 6.1.pipe and top support of M.S.round plate of 250 mm & 8mm thickness is welded top. Square tube of 30x30x2 mm is use for to support center pipe. Height of stool is 3ft. Foundation stool is embedded in C.C. stock below ground level. Grips - High quality rubber. Bearing- Use is 6005 permanent lubricated reputed brand. Bearing bushes - 60mm OD seamless pipe. Pin -Made of 25mm M.S. bright bar. Circlips - A 24 circlips are used for assembly. Coating - best quality of powder coating 80-100 micron. Safety Instructions and Exercise chart - start & finish position stick on product
1
-
-
... More
Arm and Paddle Bike.
Providing and fixing Arm and Paddle Bike made from G.l. pipe. Dimensions: (L X W X H)= 990X500X880mm.
1. Main Frame-100mmX50mmX2.5mm rectangular CR pipe with bending design.
2. Foundation plate-M.S. round plate of 250mm & 8mm thick.
3. Handle- 33mm OD "B" Class 61 Round pipe dully bending design.
4. Side and top cover-1.6 mm thick MS laser cutting profile is used.
5. Seat- 5mm thick MS laser cutting profile is used.
6. Paddie-100mmX50mm capsule pipe and 40x16 mm MS flat is use for connecting the paddle and shaft.
7. Closing cap's- PP/NYLON/HDPE material.
8. Foundation stool: Made from main pipe 88 mm OD M.S pipe and top support of M.S.round plate of 250 mm & 8mm thickness is welded top. Square tube of 30x30x2 mm is use for to support center pipe. Height of stool is 3ft.
Foundation stool is embedded in C.C. stock below ground level.
Bearing bushes - 60mm OD seamless pipe.
Bearing- Use is 6005 permanent lubricating sealed reputed brand.
Shaft -Made up of 25mm OD MS Bright bar.
Circlips- A 24 circlips are used for assembly.
Coating - best quality of powder coating 80-100 micron.
Safety Instructions and Exercise chart - start & finish position stick on product.
1
-
-
... More
Single bar.
Providing and fixing Single bar made from G.l. pipe. Dimensions: (L X W X H) 3550X2590mm.
1. Main frame - made from 48 OD "B" Class G.l. pipe.
2. Frame of Single Bar - 33 OD "B” Class 6.1. pipe.
3. Foundation plate -M.S. round plate of 0 250mm & 8 mm thick.
4. Top Closing cap's- Decent Design Size PP/HDPE/MS. Material
5. Foundation stool: Made from main pipe 88 mm OD M.S pipe and top support of M.S. round plate of 250 mm & 8mm thickness is welded top. Square tube of 30x30x2 mm is use for to support center pipe. Height of stool is 3ft.
Foundation stool is embedded in C.C. stock below ground level.
Coating - best quality of powder coating 80-100 micron.
Safety Instructions and Exercise chart - Made from Aluminum/stainless-steel stick-on product
1
-
-
... More
Double bar.
Providing and fixing Double bar made from 6.1. pipe. Dimensions: (L X W X H) 1850X530X1980mm.
1. Main frame - made from 48 OD "B" Class G.l. pipe.
2. Remaining frame - made from 48 OD *B" Class G.l. pipe
3. Closing cap's- PP/NYLON/HDPE material.
Foundation stool: Made from main pipe 088 mm OD M.S pipe and top support of M.S. round plate of 250 mm 8c 8mm thickness Is welded top. Square tube of 30x30x2 mm is use for to support center pipe. Height of stool is 3ft. Foundation stool is embedded in C.C. stock below ground level.
Coating- best quality of powder coating 80-100 micron.
Safety Instructions and Exercise chart - start & finish position stick on product
1
-
-
... More
ANNEXURE – " I STAINLESS STEEL OPEN GYM as per tender notice specification
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements