Directorate Of Municipal Administration Tender

Supply of C.I. mechanical compression collar coupling suitable for C.I. spun pipes (as per IS-1536/2001) and complete with sealing rubber gasket of SBR, C.I., follower glands and M.S. nut bolts. The whole assembly should be mechanically and hydraulically tested to the provisions as laid down in IS:1538/1993) 100 mm Dia.

Providing and supplying double flange sluice valves confirming for IS 2906/14846 including warn gear arrangement as per test pressure stainless steel spindle caps including all taxes transportation etc complete. 100 mm Dia. Sluice Valve PN 1.6 (Without Bypass)

Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and preading as directed, normal dewatering.preparing the bed for foundation and excluding backfilling, etc. complete. (Bd-A- 1/259) Add 10% Municipal Area 100 mm Dia. Pipeline lift 0.00 to 1.50 m

Providing and supplying Air Valves as per IS- 14845 and MJP's standard specifications double orifice type combined with screw down isolating valve, small orifice elastic ball resting on a gun metal orifice nipple, large orifice vulcanite ball seating on moulded seat ring, inlet face and drilled, including insurance, third party inspection charges, loading, unloading, transportation upto departmental stores, excluding GST levied by GOI & GOM in all respect etc. complete 50 mm Dia. Air Valve Double Ball Flanged Type PN-1.6

Providing erecting Cast Steel /Spheroidal Graphite (S.G.) Iron D/F Reflux Valves Single Door with jointing to pipe work (including all hardware and packing) water works quality with jointing to pipe without bypass arrangement, with gunmental seats including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. completed but excluding C. C. foundation /structural steel support 100 mm Dia. Reflux valve PN1.6

Erecting and hoisting in position and jointing, testing M.S./ C.I. D/F pipes and specials in vertical position including cost of all jointing materials (rubber packing, nut bolts, etc.) labour, scaffolding, hydraulic testing etc.complete. Add 2% Municipal Area 100 mm Dia. DI Pipe

Providing and laying in situ Cement concrete of trap/granite/quartzite/ gneiss metal for PCC work below foundation and footing including normal dewatering, plywood form work, compaction, finishing and curing, etc, complete. Add 2% Municipal Area

Lowering, laying and jointing in position following C.I.D/F Reflex valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete. (Rate for all class of valves.) 100 mm Dia. Sluice Valve & Reflux Valve

Lowering, laying and fixing in proper alignment and position all types of C.I. air valves as directed by Engineer-in-charge including cost of conveyance from stores to site of work, cost of all material and giving satisfactory hydraulic testing, etc. complete. (for all class of valves). 50 mm Dia. Air Valve Double Ball Flanged Type PN-1.6

Refilling the trenches with available excavated stuff with soft material first over pípeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging, etc. complete. Add 2% Municipal Area Net Qty. of Refilling

Providing and supplying ISI standard MS specials of required thickness with 3 coats of approved make epoxy paint (Shalimar, Ciba or Mahindra & Mahindra make) from inside and outside including all taxes (Central and local), octroi, inspection charges, transportation to stores/site, and stacking, etc. complete. MS barrels (pipe pieces) locally manufactured (for small quantities) for Making Bends

Welding in all positions with required number of runs, for M. S. pipes internally and / or externally including gauging wherever necessary, fixing appurteriances and other accessories in connection with pipe laying work as per specification. Butt Joint 5 mm 5 mm Thk Butt Joint

5 mm Thk Lap Joint

Gas cutting (either square cut or V cut) pipes, plates, etc. of thickness (ii) Above 5 mm. Upto 10 mm

Giving satisfactory hydraulic testing of following C. I. D/F Reflex vaives, Butterfly valvos and Sluice valves 100 mm Dia. Sluice Valve & Reflux Valve

Providing structural steel work in single stanchions composed of RSJ, channel, etc. with caps, bases, mild steel plates, angles, brackets, cleats, gusset plates, anchor bolts, etc. as per detailed design and drawing or as directed by Engineerincharge Including cutting, fabrication, hoisting, erecting, fixing in position, making riveted / bolted / welded connections and one coat of anticorrosive paint and over it two coats of oil painting. etc. complete. (Bd-C-6/277) RSJ Weight

Providing and fixing M.S. chequerred plate flooring of following thickness supported on M.S. angles (25 x 25 x 5 mm size) including welding, cutting and fabricating the plates to the required square or rounding shape, making holes in the plate, including providing and applying 3 coats of anticorrosive paint, etc. complete as directed by Engineer-in-charge 8 Mtr. Dia 2 Nos. of Well, 8 mm Thk

Providing, erecting and giving test of submersible pump set conforming to IS 8034 and motor conforming to IS 9283, with water proof winding. Pump shall be suitable for various delivery head and discharge with stainless steel shaft. Motor suitable for working on 415 V ± 10%, 3 Ph, 50 Hz A.C. Supply, with cable guard, thrust carbon/fiber bearing to withstand entire hydraulic thrust. The pump set shall be suitable for direct coupling, with suitable suction strainer. Pump should have suitable discharge out let as per manufacturer's design. Antithrus! stream lined non return valve shall be provided with the pump. 3 m submersible copper conductor cable in single / double run and 2 pairs of suitable size erection clamp 10 mm thick shall be provided with each pump. 20.00 HP Submersible Pumo 150 mm dia (with Bronze / Stainless steel (CF8M) Impeller) up to 15 stages (1W + 1S)

Chain Pulley Block Providing, erecting triple spur gear type Chain Pulley Block suitable for capacity as below with 6 m lift complete with load chain and hand chain suitable for above lift, tested to 50% over load as per IS 3832 carrying ISI mark. 5 Tonne Capacity

F.A.S.D. Starter Supplying and erecting Fully Automatic Star Delta starter to operate squirrel cage induction motor working on 380- 440 Volt, 3 phase, 50 Hz with no volt coil, over load element, and ON OFF push buttons, with necessary material and connected to supply, etc complete. Starter with original sheet steel encloser 20 HP & Up to 25 HP

Cable 3 core PVC insulated, PVC sheathed copper conductor flat submersible cable Supplying and erecting, Flat flexible submersible cable with, Copper Conductor, PVC insulated, and PVC sheathed 3 core 10 sq mm