Directorate Of Municipal Administration Tender

Item No. 4 :- Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork,laying/pumping, compacting, roughening them if special finish is to beprovided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete.With fine aggregate (Natural Sand / Crushed sand VSI Grade finelywashed etc) Spec. No.: Bd. E. 1 Page No. 287 ( Item No.Plain Cement Concrete 24.01 BDE 1, Page No.175)

Item 5 :- (RCC Slab) Providing and laying Cast in situ/Ready Mix cement concrete in M20 of trap/ granite/quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, Steel centering, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) Spec. No.: Bd.E.4 Page No. 289 and B-7, Page No.38 ( Item No.Plain Cement Concrete 24.10 BDE 4 Page No.176)

Item No.6 :- ( RCC Pardi) Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting , curing , finishing and rougheningthem if special finish is to be provided and curing complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) Spec. No.: Bd.F.11 Page No.304 and B.7, Page No. 38, (Item No. Reinforced Cement Concrete 26.17 BDF 11, Page No.185)

Item No. 7 :- Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. Spec. No.: Bd.F.17, Page No. 306 ( Item No.Reinforced Cement Concrete 26.33 BDF 17, Page No.188)

Item No 8 :- Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting with Vibratory roller. to the required density. By Mechanical Means - Grading I (Using Screening Type A (11.2) mm Aggregate) Spec : MORTH - 404 ( Item No. 3.19, Page No. 29)

Item No 9 :- Providing and constructing 75 mm. thick Modified Penetration Macadam (MPM) road surface including all materials, preparing the existing road surface, spreading 40 mm. stone metal layers 100% crusher broken metal with conical crusher plant heating and spraying the bitumen of specified grade @ 2 Kg/sqm, spreading 12 mm.size chips compacting with three wheel static roller having weight 8 to 10 MT. to achive the desired degree of compaction as per Technical Specification Clause 506 etc.complete. Including picking of existing WBM surface. (VG-30 bulk bitumen rates are considered to arrive at rates) Spe. No .IRC -SP-20, 2002Clause No. 8.7.3( Item No. 3.35b, Page No. 31)

Item No 10 :-Providing and applying tack coat on the prepared surface heating by fames in Boiler and spraying bitumen set footed in bitumen boller on B.T.surface 2.5kg/10sqm.(VG-30 bulk bitumen rates are considered to arrive at rates) Spec : MORTH 503 ( Item No. Road Sub Base and Base Course 3.30 MORTH 503,Page No.30)

Item No 11 :- Open Graded Premix Surfacing- Providing and Laying OGC 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates premixed with bituminous binder transported to site with VTS , laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired compaction but excluding prime / tack and Seal coat. For Bitumen of specified grade--USING drum mix typehot mix plant with SCADA, Paver and Vibratory roller ( Over MPM Surface) (VG-30 bulk bitumen rates are considered to arrive at rates) Spec : MORTH 511 ( Item No. 4.12 MORTH 511, Page No. 36)

Item No 12 :-Providing bituminous Type A liquid seal coat on bituminous surface including supplying all materials and bitumen of specified grade preparing existing road surface, heating and applying bitumen @ 0.98 KgSqm. by mechanical means, spreading chips and rolling, by static roller having weight 8 to 10 MT. etc. complete. (VG-30 bulk bitumen rates are considered to arrive at rates) Spe.No.MORTH 513 (Item No.4.01 MORTH 513, Page No.35)

Item No.13 :- Removing cover / Providing Frame cover And Increasing height of Main Sever Line ( UGD gutter ) (Item No. 26.33 )

Item No.14 :- Removing cover / Providing Frame cover And Increasing height of Property Chember ( UGD gutter ) (Item No. 26.33 )

Vigilance & Quality Control Circle Pune Testing charges for construction material used for this work in Dustrict Laboratory etc. Complet

BASIC TEST OF AGGREGATE Water Absorption, Specific Gravity. Impact Value Crushing Value

Basic Test of Aggregate Metal / Murum - Sieve Analysis

Liquid limit & plastic Limit

BITUMEN:- Penetration, Softening Point, Flash & Fire Point, Specific Gravity

Extraction Test.

FINE AGGREGATES. Fineness Modulus ( Sieve Analysis ),Silt & Clay Content

TEST OF CONCRETE Compressive Strength OF C.C. Cube(Set of 3 cubes). M-10

TEST OF CONCRETE Compressive Strength OF C.C. Cube(Set of 3 cubes). M-20

STEEL TESTING Upto 16 mm (Set of 3 Bars)