Directorate Of Municipal Administration Tender

CHEST PRESS Double • AREA: 0.71Mtr x 1.72Mtr. • Safe Area: 0.86Mtr X 2.48Mtr. • Providing and fixing chest Press made from “B” class G.I. Pipe. The center pipe is of Ø115mm made from “C” class G.I. Pipe., and • The bottom support of M.S. round plate of Ø250mm & 10mm thickness is welded at bottom. • The remaining frame is made up of Ø400mm “C” Class G.I. Pipe. • The handle frame is made up of Ø32 mm “C” class G.I.PIPE. • For the assembly different bushes are used which is made from 50mm with 3mm thickness seamless pipe & 50 mm solid bar is used. • The foundation used for fixing is consists of three equal items i.e. Ø115mm made from “C” class G.I. pipe, M.S. Round plate of 250 mm& 10mm thickness & 25mm X 25mm X3mm M.S. angle. • The seats is fitted on the outer frame is made up of high quality FRP material of size 330mm X300mm of thickness 3mm % M.S. Plate of thickness 5mm and size 250mm x 200mm is used to Support it. • Closing caps are made from top quality FRP material which is of 2mm thickness. • The pins used are made up of Ø25mm & Ø17mm solid bar. • The bearings used are of “6205zz: & “6203zz” permanent lubricated sealed bearing of reputed make (FAG/SKF.) • High tensile steel with galvanized nut bolts are used for assembly. • The series used for assembly is made up of Ø25mm & 17mm. • The powder coat is done by Poly urethane & Epoxy powder with 60 to70 micron thickness.

CROSS TRAINER : • AREA: 1.32 x 0.60Mtr. Safe Area: 1.77 x 1.2Mtr. • Providing and fixing cross trainer made from “B” class G.I. Pipe. • The center pipe is of Ø90mm made from “C” class G.I. Pipe, and • The bottom support of M.S. Round Plate of Ø250 mm & 10mm thickness is welded at bottom. • The handle frame is made up of Ø32mm “C” class G.I. Round Pipe. • The foundation used for fixing is consists of three equal items i.e. Ø90mm made from “C” class G.I. Round Pipe, M.S. Round Plate of Ø250 mm & 10mm thickness, 25mm X 25mm M.S. Angle of 3mm thickness. • To join the center pipe & handle frame seamless pipe of Ø50 mm &3mm thickness is used. • For the movement, Bushes are used & for it Ø60mm &3mm thickness. • The footrests are made from FRP/C.I. /aluminum casting material; its sizes are 130mm X 310mm& 5 mm thickness. • For support of footrest of Cross trainer 130mm X 310mm with 5mm thickness M.S. Plate and 50mm X 50mm CRS square pipe with 3mm thickness is used. • Closing caps made from top quality FRP material which is of 2 mm thickness. • The Pins used is made up of Ø25 mm Harden bright bar. • The bearings used are of “6205zz” permanent lubricated sealed bearing of reputed make (FAG/SKF). • The handles used for cross trainer are of Rubber grip. • High tensile steel with galvanized nut bolts are used for assembly. • The powder coat is done by Poly urethane & Epoxy powder with 60 to 70 micron thickness

CYCLE : • AREA : 1.57Mtr. X 0.57 Mtr. • SAFE AREA : 2Mtr X 1Mtr. • Providing and fixing Cycle made from “B” class G.I. Pipe. • The main frame of Ø40mm made from “C” class G.I. Pipe. • For the support of foot pedal M.S. round plate of Ø 250mm & 10mm thickness is used. • The handle frame is of Ø32 mm made from “C” class G.I. Pipe • The seats is fitted on the frame is made up of high quality FRP material of size 330 mm x 300mm is used to Support it. • The foundation used for fixing is consists of 25mm X 25mm M.S. angle of 3mm thickness. • Closing Caps made from top quality FRP material with 2mm thickness. • The pins used are made up of Ø25mm bright bar. • The bearings used are “6205zz” permanent lubricated sealed bearing of reputed make (SKF/FAG). • High tensile steel with galvanized nut bolts are used for assembly. • The serclips used for assembly are of Ø25mm. • The powder coat is done by Poly urethane & Epoxy powder with 60 to 70 micron thickness

DOUBLE BAR : • AREA : 1.87Mtr X 0.53Mtr. SAFE AREA : 4.41Mtr X 1.14Mtr. • Providing and fixing Double Bar made from “B” class G.I. Pipe. • The main frame of Ø80mm made from “C” class G.I. Pipe. • The handle frame is made up of Ø40 mm “C” class G.I. Pipe. • The foundation used for fixing is 25 x 25mm x 3mm thickness Angle. • Closing Caps made from top quality FRP material with 2mm thickness & Steel cap are used. The powder coat is done by Poly urethane & Epoxy powder with 60 to 70 micron thickness.

DOUBLE TWISTER : • AREA : Ø 1.15 Mtr. SAFE AREA : Ø1.58Mtr. • Providing and fixing Double Twister made from “B” class G.I. Pipe. • The center pipe is of Ø115mm made from “C” class G.I. Round Pipe, and • The bottom support of M.S. Round Plate of Ø250 mm & 10mm thickness is welded at bottom. • The standing frame of the Double Twister is of Ø40mm made from “C” Class G.I. Pipe. • The handle frame(Round Type) of double twister is of Ø25 mm made from “C” class G.I. Pipe. • The seamless pipe is used for joining the center pipe frame & handle frame is made from Ø130mm with 3mm thickness. • The foundation used for fixing is consists of three equal items i.e. Ø90mm made from “C” Class G.I. Pipe , M.S. round plate of Ø250 mm & 10 mm thickness & 25mm X25mm X 3mm M.S. angle. • The standing plate is fitted on the standing frame is made up of Ø80mm seamless pipe. Ø300mm x 10mm thickness M.S. Round Plate. • Closing caps made from top quality FRP material which is of 2mm thickness. • The pins used are made up of Ø25mm bright bar. • The bearing used are of “6205zz” permanent lubricated sealed bearing of reputed make (FAG/SKF). • High tensile steel with galvanized nut bolts are used for assembly. • The powder coat is done by Poly urethane & Epoxy powder with 60 to 70 micron thickness.

MULTIFUNCTIONAL TRAINER: • AREA: 0.60 Mtr. X 0.73 Mtr. SAFE AREA: 1 Mtr X 4 Mtr. • Providing and fixing Hip Flexer made from “B” class G.I. Pipe. • The main frame of Ø115mm made from “C” class G.I. Pipe, and • The bottom support of M.S. Round Plate of Ø250 mm & 10mm thickness is welded at bottom. • The handle frame is made up of Ø40mm “C” class G.I. Pipe. • The bottom support of handle of 80 X 40mm X 3mm thickness is welded at bottom. • The foundation used for fixing is consists of three equal items i.e. Ø90mm made from “C” Class G.I. Pipe , M.S. round plate of Ø250 mm & 10 mm thickness & 25mm X 25mm M.S. angle of 3mm thickness. • Closing caps made from top quality FRP material which is of 2mm thickness. • High tensile steel with galvanized nut bolts are used for assembly. • The powder coat is done by Poly urethane & Epoxy powder with 60 to 70 micron thickness.

HORIZONTAL BAR : • AREA : 1.82 Mtr. SAFE AREA : 2Mtr x 2Mtr. • Providing and fixing Horizontal Bar made from “B” class G.I. Pipe. • The main frame of Ø60mm & Ø 32mm made from “C” class G.I. Pipe. • For connecting the center pipe to main frame pipe Ø75mm made from “C” class G.I. Pipe. • The foundation used for fixing is consists of 25mm X 25mm M.S. angle of 3mm thickness. • Closing caps made from top quality FRP material used for assembly. • High tensile steel with galvanized nut bolts are used for assembly. • The powder coat is done by Poly urethane & Epoxy powder with 60 to 70 micron thickness.

HORSE RIDER : • AREA : 1.18Mtr X 0.4Mtr. • SAFE AREA : 2.5Mtr X 1 Mtr. • Providing and fixing Horse Rider made from “B” class G.I. Pipe. • The main frame of Ø60mm made from “C” class G.I. Pipe, and • The bottom support of M.S. Round Plate of Ø250 mm & 10mm thickness is welded at bottom. • The Leg movement frame is of Ø40mm made from “C” class G.I. Pipe. • The handle frame is made up of Ø32 mm “C” class G.I. Pipe. • The foundation used for fixing is consists of three equal items i.e. Ø90mm made from “C” Class G.I. Pipe , M.S. round plate of Ø250 mm & 10 mm thickness & 25mm X25mm M.S. angle of 3mm thickness. • The footrests is made from FRP/C.I./ Aluminum casting material , its sizes are 130mm X 310mm X 5mm. for the support 50 X 50mm X 2mm CRC square pipe is used . • Closing caps made from top quality FRP material with 2mm thickness. • The pins used are made up of Ø25mm bright bar. • The bearing used are of “6205zz” permanent lubricated sealed bearing of reputed make (FAG/SKF). • High tensile steel with galvanized nut bolts are used for assembly. • The powder coat is done by Poly urethane & Epoxy powder with 60 to 70 micron thickness.

LEG PRESS : • AREA: 0.40 X 1.77 Mtr. SAFE AREA: 1 x 2.38 Mtr. • Providing and fixing Leg Press made from “B” class G.I. Pipe. • The center pipe is of Ø115mm made from “C” class G.I. Pipe, and • The bottom support of M.S. Round Plate of Ø250 mm & 10mm thickness is welded at bottom. • The remaining outer frame is made up of Ø400mm “C” Class G.I. Pipe. • The foundation used for fixing is consists of three equal items i.e. Ø80mm made from “C” Class G.I. Pipe , M.S. round plate of Ø250 mm & 10 mm thickness & 25mm X25mm X 3mm M.S. angle. • To join the center pipe & outer frame seamless pipe of Ø120 mm & 3mm thickness is used. • The seats are fitted on the outer frame is made up of FRP material of size 330mm X 300mm of thickness 3 mm & M.S. Plate of thickness 5 mm and size 250 mm X 200mm is to support it. • The footrests is made from Aluminum casting material, its sizes are 130mm X 310mm & 5mm thick • The frame of footrests consists of Ø32 mm made from “C” class G.I. Pipe. • Closing caps made from top quality FRP material which is of 2mm thickness. • The inner bushes is made from seamless pipe, its diameter is 60mm & 5mm thickness. • The pins used in are made up of Ø25 mm hardened bright bar. • The bearing used are of “6205zz” permanent lubricated sealed bearing of reputed make (FAG/SKF). The handles used are of Rubber grip. • High tensile steel with galvanized nut bolts are used for assembly. • The serclips used for assembly are of Ø 25mm. • The powder coat is done by Poly urethane & Epoxy powder with 60 to 70 micron thickness.

PECK DECK: • SAFE AREA : 1.27MTR X2.28MTR • AREA : 2.05MTR X 1.21MTR • HIEGHT : 2.20MTR • LENGTH : 2MTR • WIDTH : 1.19MTR MATERIAL : • GI PIPE : Ø115M, Ø40MM, Ø25MM. • CRCA PIPE: 40 X 40MM., 80X 40MM. • BRIGHT BAR: Ø20MM. • BEARING: 6203ZZ, 6205ZZ. • F.R.P. SEATS : 330MM X 300MM. • NUT BOLTS : ½ “ X 2” , m8 x1”, 3/8 x 1” • PLASTIC CAP : Ø40MM. • FRP CAP : Ø 100MM. • PROFILE PLATE : 1) Ø 250MM. X 10MM. 2) TRIANGULAR SIZE. 3)PP STOPPER BUSH

POMMEL HORSE : • AREA: 2.05Mtr x 0.6Mtr. SAFE AREA: 4Mtr x 1Mtr. • Providing and fixing Pommel Horse made from “B” class G.I. Pipe. • The main frame of Ø80mm, Ø60mm made from “C” class G.I. Pipe, and • The bottom support of M.S. Round Plate of Ø250 mm & 10mm thickness is welded at bottom. • The handle frame is of Ø32mm made from “C” class G.I. Pipe. • The foundation used for fixing is consists of three equal items i.e. Ø90mm made from “C” Class G.I. Pipe , M.S. round plate of Ø250 mm & 10 mm thickness & 25mm X 25mm M.S. angle of 3mm thickness. • Ø32mm “C” class G.I. Pipe is place on the frame Ø60mm made from “C” class G.I. Pipe 60 x 10m thickness flat is used for supporting for it. • Closing caps made from top quality FRP material which is of 2mm thickness. • High tensile steel with galvanized nut bolts are used for assembly. • The powder coat is done by Poly urethane & Epoxy powder with 60 to 70 micron thickness

PUSH UP BAR : • AREA: 1.22Mtr. x 0.55Mtr. SAFE AREA: 2Mtr x 1Mtr. • Providing and fixing Push Up Bar made from “B” class G.I. Pipe. • The main frame of Ø115mm made from “C” class G.I. Pipe, and • The bottom support of M.S. Round Plate of Ø250 mm & 10mm thickness is welded at bottom. • The handle frame is of Ø32mm made from “C” class G.I. Pipe. • The foundation used for fixing is consists of three equal items i.e. 90mm made from “C” Class G.I. Pipe , M.S. round plate of Ø250 mm & 10 mm thickness & 25mm X 25mm M.S. angle of 3mm thickness. • Closing caps made from top quality FRP material which is of 2mm thickness. • High tensile steel with galvanized nut bolts are used for assembly. • The powder coat is done by Poly urethane & Epoxy powder with 60 to 70 micron thickness.

ROWER : • AREA: 1.2 X 1Mtr. SAFE AREA: 1.5. X 1.5.Mtr. • Providing and fixing Rower made from “B” class G.I. Pipe. • The main frame is of80mm X 40mm & 40mm X 40mm CRC Pipe with 2mm thickness. • The handle frame is of Ø32mm made from “C” class G.I. Pipe. • The foundation used for fixing of consists of three equal items i.e. Ø40mm made from “C” Class G.I. Pipe, C channel of 75mm X 40mm X 5mm & 25m X 25m X 3mm M.S. angle. • To join the movement frame to main frame seamless pipe of Ø50 mm &3mm thickness is used. • The seats which are fitted on the main frame is made up of high quality FRP material of size 330mm X 300mm of thickness 3mm & M.S. Plate size of 250mm X 200mm X 5mm is used to support it. • Closing caps made from top quality FRP material which is of 2mm thickness. • The pins used in are made up of Ø17mm hardened bright bar. • The bearing used are of “6203zz” permanent lubricated sealed bearing of reputed make (FAG/SKF). • The handles used are of Rubber grip. • High tensile steel with galvanized nut bolts are used for assembly. • The bushes (stopper) used to avoid the collusion. • The serclips used for assembly is of Ø17mm. • The powder coat is done by Poly urethane & Epoxy powder with 60 to 70 micron thickness

SEATED PULLER DOUBLE • AREA: 0.76 X 2.28Mtr. SAFE AREA: 1.06 X 3Mtr. • Providing and fixing Seated Puller made from “B” class G.I. Pipe. • The center pipe is of Ø115mm made from “C” class G.I. Pipe and the bottom support of M.S. round plate of Ø250mm & 10 mm thickness are welded at bottom. • The remaining frame is made up of Ø40mm “C” Class G.I. Pipe. • The handle frame is of Ø32mm made from “C” class G.I. Pipe. • The seat frame is of Ø40mm “C” class G.I. Pipe. • For the assembly different bushes are used which is made from seamless pipe of Ø50mm and 3mm thickness & 50mm solid bar is used. • The foundation support made up of three equal items i.e. Ø115mm made from “C” Class G.I. Pipe, M.S. Round plate of Ø 250mm & 10mm thickness & 25m X 25m X 3mm M.S. angle. • The seats are made up of high quality FRP material of size 330mm X 330mm of thickness 3mm & M.S. Plate size 250mm X 200mm X 5mm is used to support it. • Closing caps made from top quality FRP material which is of 2mm thickness. • The pins used are made up of Ø17mm solid bar. • The bearing used are of “6203zz” permanent lubricated sealed bearing of reputed make (FAG/SKF). • The serclips used for assembly is of Ø17mm. • The powder coat is done by Poly urethane & Epoxy powder with 60 to 70 micron thickness.

SEATING & STANDING TWISTER : • AREA: 1.7 X 0.66Mtr. SAFE AREA: 2 X 1Mtr. • Providing and fixing Seating & Standing Twister made from “B” class Galvanized Iron (G.I.) Pipe. • The center pipe is of Ø100mm made from “C” class G.I. Round Pipe, and • The bottom support of M.S. round plate of Ø250mm & 10 mm thickness is welded at bottom. • The standing frame of the Seating & Standing Twister is of Ø40mm, Ø60mm, and Ø50mm made from “C” Class G.I. Pipe. • The handle frame of Seating & Standing Twister is Ø32mm & Foot resting Frame of seating side is made from “C” class G.I. Pipe of Ø25mm & Ø32mm. • The seamless pipe is used for joining the center pipe frame & handle frame is made from Ø130mm with 3mm thickness. • The foundation used for fixing is consists of three equal items i.e. Ø90 mm made from “C” class G.I. Pipe , M.S. Round Plate of Ø250mm & 10mm thickness & 25 mm X 25mm X 3mm M.S. angle. • The standing plate is fitted on the standing frame is made up of Ø100mm seamless pipe & Seating plate is fitted on the frame is made up of Ø60mm seamless pipe. Ø300mm X 10mm thickness M.S. Round plate. • Closing caps made from top quality FRP material which is of 2mm thickness • The pins used are made up of Ø25mm bright bar. • The bearing used are of “6205zz” permanent lubricated sealed bearing of reputed make (FAG/SKF) • High tensile steel with galvanized nut bolts are used for assembly. • The powder coat is done by Poly urethane & Epoxy powder with 60 to 70 micron thickness.

SEATED TWISTER TRIPLE • AREA: Ø1.15Mtr. SAFE AREA: Ø1.58Mtr. • Providing and fixing Seated Twister made from “B” class G.I. Pipe. • The center pipe is of Ø90mm made from “C” class G.I. Pipe, and • The bottom support of M.S. round plate of Ø250mm & 10 mm thickness is welded at bottom. • The standing frame of the Seated Twister is of Ø40mm made from “C” Class G.I. Pipe. • The handle frame (Round type) of seated twister is of Ø25mm made from “C” class G.I. Pipe. • The seamless pipe is used for joining the center pipe frame & handle frame is made from Ø130mm with 3mm thickness. • The foundation used for fixing is consists of three equal items i.e. 90 mm made from “C” class G.I. Pipe , M.S. Round Plate of Ø250mm & 10mm thickness & 25 mm X 25mm X 3mm M.S. angle. • The seating plate is fitted on the standing frame is made up of Ø80mm seamless pipe. Ø300mm X 10mm thickness M.S. Round plate. • Closing caps made from top quality FRP material which is of 2mm thickness • The bearing used are of “6205zz” permanent lubricated sealed bearing of reputed make (FAG/SKF). • High tensile steel with galvanized nut bolts are used for assembly. • The powder coat is done by Poly urethane & Epoxy powder with 60 to 70 micron thickness.

SHOULDER BUILDER : • AREA: Ø0.89Mtr. SAFE AREA: Ø1.5Mtr. • Providing and fixing Shoulder Builder made from “B” class G.I. Pipe. • The center pipe is of Ø115mm made from “C” class G.I. Pipe, and the bottom support of M.S. Round Plate of 250mm diameter & 10mm thickness is welded at bottom. • The handle movement frame is of Ø32mm & Ø25mm made from “C” Class G.I. Pipe. • To join the center pipe & handle movement frame seamless pipe of Ø130mm & 3mm thickness is used. • The foundation used for fixing is consists of three equal items i.e. Ø90mm made from “C” class G.I. Pipe , M.S. Round Plate of Ø250mm & 10mm thickness & 25 mm X 25mm X 3mm M.S. angle. • Closing caps made from top quality FRP material which is of 2mm thickness • The bearing used are of “6201zz” permanent lubricated sealed bearing of reputed make (FAG/SKF). • High tensile steel with galvanized nut bolts are used for assembly. • The serclips used for assembly is of Ø25mm. • The Poly Urethane plastic bush is used for handling. • The powder coat is done by Poly urethane & Epoxy powder with 60 to 70 micron thickness.

SIT UP BOARD : • AREA: 0.50 X 1.70Mtr. SAFE AREA: 0.86 X 2Mtr. • Providing and fixing Sit up Board made from “B” class G.I. Pipe. • The main frame is of Ø40mm & Ø32mm made from “C” Class G.I. Pipe. • Perforated sheet of 1.5mm thickness is welded on 25 X 3mm thick flat Patti on main frame. • The base side of the sit up board is made of 50 X 20 mm CRC pipe. • The powder coat is done by Poly urethane & Epoxy powder with 60 to 70 micron thickness.

SKY WALKER DOUBLE • AREA: 1.72Mtr. 0.63Mtr. SAFE AREA: 2.54Mtr. X 1Mtr. • Providing and fixing Sky Walker made from “B” class G.I. Pipe. • The main frame is Ø80mm made from “C” Class G.I. Pipe. • The outer ring of sky walker is Ø32 made from “C” Class G.I. Pipe. • For connecting I the handle frame to main pipe Ø60mm “C” Class G.I. Pipe is used. • The bottom support of M.S. round plate of Ø250mm & 10 mm thickness is welded at bottom. • The Leg movement frame is of 50mm X 50mm X 2mm thick CRC square pipe. • The handle frame is of Ø40mm made from “C” Class G.I. Pipe. • The foundation is used for fixing is 80 X 40mm X 3mm thickness C-Channel. • The footrests is made from Aluminum casting material, its sizes are 130mm X310mm X 5mm. • Closing caps made from top quality FRP material which is of 2mm thickness & Plastic cap are used. • The pins used are made up of Ø25mm bright bar. • The bearings are used are “6205zz” & “6203zz” permanent lubricated sealed bearing of reputed make (FAG/SKF). • High tensile steel with galvanized nut bolts are used for assembly. • The serclips used for assembly is of Ø25mm. • The powder coat is done by Poly urethane & Epoxy powder with 60 to 70 micron thickness.

SURF BOARD : • AREA: 0.91 X 0.86Mtr. SAFE AREA: 1.39 X 1.27Mtr. • Providing and fixing Surf Board made from “B” class G.I. Pipe. • The center pipe is of Ø115mm made from “C” class G.I. Pipe, and • The bottom support of M.S. Round Plate of Ø250mm & 10mm thickness, 25mm x 25mm x 3mm M.S. angle. • The foundation used for fixing is consists of three equal items i.e. Ø90mm made from “C” class G.I. Pipe , M.S. Round Plate of Ø250mm & 10mm thickness & 25 mm X 25mm X 3mm M.S. angle. • To join the center pipe & handle frame seamless pipe of Ø130mm & 3mm thickness is used. • For the movement of bushes are used Ø60mm with 3mm thickness & Ø60mm solid bar is used. • The footrests is made from Aluminum casting material, its sizes are 320mm X270mm & 5mm thickness. • For support of footrest is 200mm x 250mm with 5mm thickness M.S. Plate and 50mm x 50mm CRC Square pipe with 2mm thickness is used. • Closing caps made from top quality FRP material which is of 2mm thickness. • The pins used are made up of Ø25mm bright bar. • The bearings are used are “6205zz” permanent lubricated sealed bearing of reputed make (FAG/SKF). • The handles used are of Rubber grip. • High tensile steel with galvanized nut bolts are used for assembly. • The bushes (stopper) used to avoid the collusion made from Poly Urethin Plastic material of Ø50mm. • The serclips used for assembly is of Ø25mm. • The powder coat is done by Poly urethane & Epoxy powder with 60 to 70 micron thickness.

STANDING TWISTER : • AREA: Ø1.15Mtr. SAFE AREA: Ø1.58Mtr. • Providing and fixing Triple Twister made from “B” class Galvanized Iron (G.I.) Pipe. • The center pipe is of Ø115mm made from “C” class G.I. Pipe, and • The bottom support of M.S. Round Plate of Ø250mm & 10mm thickness is welded at bottom. • The standing frame of the Triple Twister is of Ø40mm made from “C” Class G.I. Pipe. • The handle frame (Round type) of Triple twister is of Ø25mm made from “C” class G.I. Pipe. • The seamless pipe is used for joining the center pipe frame & handle frame is made from Ø130mm with 3mm thickness. • The foundation used for fixing is consists of three equal items i.e. Ø 90 mm made from “C” class G.I. Pipe , M.S. Round Plate of Ø250mm & 10mm thickness & 25 mm X 25mm X 3mm M.S. angle. • The standing plate is fitted on the standing frame is made up of Ø80mm seamless pipe. Ø300mm X 10mm thickness M.S. Round plate. • Closing caps made from top quality FRP material which is of 2mm thickness. • The pins used are made up of Ø25mm bright bar. • The bearings are used are “6205zz” permanent lubricated sealed bearing of reputed make (FAG/SKF). • High tensile steel with galvanized nut bolts are used for assembly. • The powder coat is done by Poly urethane & Epoxy powder with 60 to 70 micron thickness.

UNEVEN BAR : • AREA: 3.2Mtr. X 1.36Mtr. SAFE AREA: 4Mtr. X 2Mtr. • Providing and fixing Uneven Bar made from “B” class G.I. Pipe. • The main frame is Ø115mm made from “C” Class G.I. Pipe. • The bottom support of M.S. Round Plate of Ø250mm & 10mm thickness is welded at bottom. • The handle frame is of Ø40mm made from “C” class G.I. Pipe. • The foundation used for fixing is consists of three equal items i.e. 90 mm made from “C” class G.I. Pipe , M.S. Round Plate of Ø250mm & 10mm thickness & 25 mm X 25mm M.S. angle of 3mm thickness. • Closing caps made from top quality FRP material which is of 2mm thickness. • The powder coat is done by Poly urethane & Epoxy powder with 60 to 70 micron thickness.

WEIGHT LIFT /BENCH WITH FIX WEIGHT • AREA: 1Mtr x 0.5Mtr. SAFE AREA: 1.5Mtr x 1Mtr. • Providing and fixing Weight lift made from “B” class G.I. Pipe. • The main frame of Ø115 mm made from “C” class G.I. Pipe , and • The weight lifted rod of Ø40mm made from “C” class G.I. Pipe. • Supporting Frame of weight lifting rod is Ø32mm made from “C” Class G.I. Pipe • The foundation used for fixing is consists of 25mm X 25mm M.S. angle of 3mm thickness. • Closing Caps made from top quality FRP material with 2 mm thickness. • The powder coat is done by Poly urethane & Epoxy powder with 60 to 70 micron thickness.

SEATING, STANDING TWISTER & LEG PRESS • AREA: 1.7 X 0.66Mtr. SAFE AREA: 2 X 1Mtr. • Providing and fixing Seating & Standing Twister made from “B” class Galvanized Iron (G.I.) Pipe • The center pipe is of Ø100mm made from “C” class G.I. Round Pipe, and • The bottom support of M.S. round plate of Ø250mm & 10 mm thickness is welded at bottom. • The standing frame of the Seating & Standing Twister is of Ø40mm, Ø60mm, and Ø50mm made from “C” Class G.I. Pipe. • The handle frame of Seating & Standing Twister is Ø32mm & Foot resting Frame of seating side is made from “C” class G.I. Pipe of Ø25mm & Ø32mm. • The seamless pipe is used for joining the center pipe frame & handle frame is made from Ø130mm with 3mm thickness. • The foundation used for fixing is consists of three equal items i.e. Ø90 mm made from “C” class G.I. Pipe , M.S. Round Plate of Ø250mm & 10mm thickness & 25 mm X 25mm X 3mm M.S. angle. • The standing plate is fitted on the standing frame is made up of Ø100mm seamless pipe & Seating plate is fitted on the frame is made up of Ø60mm seamless pipe. Ø300mm X 10mm thickness M.S. Round plate. • Closing caps made from top quality FRP material which is of 2mm thickness • The pins used are made up of Ø25mm bright bar. • The bearing used are of “6205zz” permanent lubricated sealed bearing of reputed make (FAG/SKF). • High tensile steel with galvanized nut bolts are used for assembly. • The powder coat is done by Poly urethane & Epoxy powder with 60 to 70 micron thickness.

SEATED TWISTER DOUBLE • AREA: Ø1.15Mtr. SAFE AREA: Ø1.58Mtr. • Providing and fixing Seated Twister made from “B” class G.I. Pipe. • The center pipe is of Ø90mm made from “C” class G.I. Pipe, and • The bottom support of M.S. round plate of Ø250mm & 10 mm thickness is welded at bottom. • The standing frame of the Seated Twister is of Ø40mm made from “C” Class G.I. Pipe. • The handle frame (Round type) of seated twister is of Ø25mm made from “C” class G.I. Pipe. • The seamless pipe is used for joining the center pipe frame & handle frame is made from Ø130mm with 3mm thickness. • The foundation used for fixing is consists of three equal items i.e. 90 mm made from “C” class G.I. Pipe , M.S. Round Plate of Ø250mm & 10mm thickness & 25 mm X 25mm X 3mm M.S. angle. • The seating plate is fitted on the standing frame is made up of Ø80mm seamless pipe. Ø300mm X 10mm thickness M.S. Round plate. • Closing caps made from top quality FRP material which is of 2mm thickness • The bearing used are of “6205zz” permanent lubricated sealed bearing of reputed make (FAG/SKF). • High tensile steel with galvanized nut bolts are used for assembly. • The powder coat is done by Poly urethane & Epoxy powder with 60 to 70 micron thickness.

TAI CHI SPINNERS : • Providing and Fixing TaiChi Spinner from “B” Class G.I. Pipe. • Bottom support in M.S. Round Plate 250mm Dia. • The handle movement frame 25mm NB “C” Class G.I. Pipe. • Center Pipe 130mm Dia. & 3mm thickness. • Foundation made from 100mm NB “C” Class G.I. Pipe & M.S. Round Plate 250mm Dia. • Pins made up of 25mm Dia. In Bright Bar. • Bearing used are “6201” and “6205” permanent lubricated sealed. • PU Plastic Bushes are used for handling. • The Nut Bolts used for assembly are in SS material. • Yellow primer is applied before top coat or duly powder coated using best quality brand paint.

FRP Slide 1.5 M

Arch Swing

Standard See Swa

Multi Seatar See Swa

Two Seat Swing

Rocking Boat

A to B Climber

Economy Slide

3 in 1 Combination

Multi Play System

Rock Climber + Lader

Providing & fixing cast iron bench in decorative model of 1.2 m length and capacity of 3 person with MS pipe/ strip etc. Complete