Directorate Of Municipal Administration Tender

Providing and constructing Brick Masonry Inspection Chamber 90 cm x 45 cm x 90 cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channelshalfround G.S.W.pipes,Brick Masonry,plastering from inside and C.I.lid cover of 75 Kilogram with lid and frame fixed in cement concrete.Sr.No.-1387, Chapter- Water Supply and Sanitary Fitting, Reference No- BDV 43, Additional Specification.-Bd.V.43 Page One Number 574, Page-343, SSR Item No.-42.11

Providing and laying concrete pipes of I.S.NP. class of 300mm diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete. Sr.No.-1380, Chapter- Water Supply and Sanitary Fitting, Reference No- BDV 41, Additional Specification.-Bd.V.41, Page One Number 573, Page-274, SSR Item No.-42.09

Providing, laying and fixing P.V.C. pipe of 110mm. dia. with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. Sr.No.-1404, Chapter- Water Supply and Sanitary Fitting, Reference No- BDV 60, Additional Specification.-As directed by Engineer in charge, Page-345, SSR Item No.-42.28.

Conveying materials obtained from road cutting including all lifts, laying in layers of 20cm. to 30cm. breaking clods, dressing to the required lines, curves, grades and section, watering and compacting to not less than 97% of standard proctor density for a lead of 300m. to 500m. inclusive, from the site of excavation to the site of deposition as directed.Sr.No.-100, Chapter-Road Sub grade, Reference No/Additional Specification.-MORTH 305, Page-27, SSR Item No.-2.26

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber,applying and brooming requisite type of screening / binding Materials to fill up the interstices of coarse aggregate, watering and compacting with vibratory roller to the required density.By Mechanical Means Grading I (Using Screening Type B (11.2 mm) Aggregate). Sr.No.-130, Chapter Road Sub Base and Base Course, Reference No-MORTH 404, Additional Specification.-MORTH 404, Page No-29, SSR Item No.-3.19

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber,applying and brooming requisite type of screening / binding Materials to fill up the interstices of coarse aggregate, watering and compacting with vibratory roller to the required density.By Mechanical Means-Grading II (Using Screening Type B (11.2 mm) Aggregate). Sr.No.-130, Chapter-Road Sub Base and Base Course, Reference No-MORTH 404, Additional Specification.-MORTH 404, Page No-29, SSR Item No.-3.20

Providing and laying Cast in situ / Ready Mix cement concrete in M15 of trap / granite / quartzite / gneiss metal for bed blocks, foundation blocks and such otheri tems including bailing out water, Steel centering, formwork, laying / pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honey combed surface and curing etc. complete. The Cement Mortar 1:3p laster is considered for rendering un even and honey combed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.),with fully automatic micro process or based PLC with SCADA enabled reversible DrumType mixer/concrete Batch mix plant (Pan mixer) etc.complete.Withfine aggregate (Crushed sand VSI Grade).Sr.No.-830, Chapter-Plain Cement Concrete, Reference No-BDE 4, Additional Specification.-Bd.E.4 Page One Number 289 and B-7, Page One Number38, Page-176, SSR Item No.-24.08

Providing and fixing heavy duty inter locking concrete Coloured paving blocks of 60 mm thickness of having a strength of 300 Kilogram/Sq.cm. of approved quality and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc. complete Sr.No.-1038, Chapter-Paving Flooring and dado, Reference No-BDM, Additional Specification.-A directed by Engineer in charge, Page No-218, SSR Item No.-33.51

Compressive Strength , Water Absorption,(Set of 8 Blocks)

ROYALTY CHARGES, a) For sand

b) For All Other Minerals

labar ins 1 %

GST 18 %