Directorate Of Municipal Administration Tender

Providing soling using 80 mm size trap metal in15cm.layer including filling voids with Crushed sand /grit, ramming, watering etc. complete.Sr.No.-759, Chapter-Excavation, Reference No-BDA , Additional Specification.-As directed by Engineer incharge, Page No-194, SSR Item No.-21.40.

Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/ granite/quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, plywood/steel formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand .Sr.No.-835, Chapter-Plain Cement Concrete, Reference No-BDE 4, Additional Specification.-Bd.E.4 Page One Number 289 and B-7, Page One Number38, Page No-216, SSR Item No.-24.08

Providing and laying in situ/ Ready Mix cement concrete M-20 of trap / granite / quartzite/ gneiss metal for R.C.C. work in foundations like raft , strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water , formwork, laying/ pumping cover blocks, compact ion and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLCwi th SCADA enabled reversible Drum Type mixer / concrete Batch mix plant (Pan mixer ) etc. complete. With natural sand/ V.S.I. quality Artificial Sand.Bd. Sr.No.-841, Chapter-Reinforced Cement Concrete, Reference No-BDF 3, Additional Specification.-Bd.F.3 Page One Number 298 and B.7, Page One Number38, Page No-219, SSR Item No.-25.11

Providing and laying Cast in situ/ Ready Mix cement concrete M-20 of trap / granite / quartzite/ gneiss metal for R.C.C. columns as per detai led designs and drawing or as directed including centering, formwork, cover blocks, laying/ pumping, compact ion finishing the formed surfaces wi th cement mor tar 1:3 of sufficient minimum thickness to give a smooth and even sur face or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer / concrete Batch mix plant (Pan mixer ) etc. complete. With natural sand/ V.S.I. quality Artificial SandBd .Sr.No.-846, Chapter-Reinforced Cement Concrete, Reference No-BDF 5, Additional Specification.-Bd.F.5 Page One Number 300 and B.7,Page.One Number 38, Page No-221, SSR Item No.-25.31

Providing and laying Cast in situ/ Ready Mix cement concrete M-20 of trap / granite / quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/ pumping, compaction and roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and st ructural steel). with fully automatic micro processor based PLCwi th SCADA enabled reversible Drum Type mixer / concrete Batch mix plant (Pan mixer ) etc. complete. With natural sand/ V.S.I. quality Artificial Sand .Sr.No.-851, Chapter-Reinforced Cement Concrete, Reference No-BDF 6, Additional Specification.-Bd.F.6 Page One Number 300 and B.7, Page One Number38, Page No-223, SSR Item No.-25.50

Filling in plinth and floors with approved excavated material in 15cm .to 20 cm. layers including watering and compacting etc. complete. Sr.No.-851, Chapter-Reinforced Cement Concrete, Reference No-BDF 6, Additional Specification.-Bd.F.6 Page One Number 300 and B.7, Page One Number38, Page No-223, SSR Item No.-25.50

Providing and laying Cast in situ/ Ready Mix cement concrete M-20 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including centering, formwork, cover blocks, laying/ pumping, compaction finishing the formed sur faces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC wi th SCADA enabled reversible Drum Typemixer / concrete Batch mix plant (Pan mixer ) etc. complete. With natural sand/ V.S.I. quality Artificial Sand. Sr.No.-856, Chapter-Reinforced Cement Concrete, Reference No-BDF 8, Additional Specification.-Bd.F.8 Page One Number 302 and B.7, Page One Number38, Page No-225, SSR Item No.-25.70

Providing and laying Cast in situ / Ready Mix cement concrete in M-20 of trap / quartzite /granite /gneiss metal for R.C.C. Waist slab, and steps of staircases as per detailed design and drawings or as directed including steel centering, formwork, steel props, laying / pumping, compaction, finishing un even and honey combed surface with C.M.1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finishis to be provided and curing etc. complete. (Excludinge inforcement, including cover block). (Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer)etc.complete.With fine aggregate (Crushed sand VSI Grade).Sr.No.-868, Chapter-Reinforced Cement Concrete, Reference No-BDF 13A, Additional Specification.-Bd. F. 13 Page One Number 305/I.S. 456 (2000, Page No-229, SSR Item No.-26.25

Providing and laying Cast in situ / Ready Mix cement concrete in M-20 of trap / granite / quartzite / gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, cover blocks, laying / pumping, compacting, curing, finishing and roughening them if special finishis to be provided and curing complete. (Excluding reinforcement and structural steel ). with fully automaticmicro process or based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade).Sr.No.-860, Chapter-Reinforced Cement Concrete, Reference No-BDF 11, Additional Bd.F.11 Page One Number 304 and B.7, Page One Number 38, Page No-185, SSR Item No.-26.17

Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. Sr.No.-876, Chapter-Reinforced Cement Concrete, Reference No-BDF 17, Additional Specification.-Bd. F. 16 Page One Number 306/I.S. 456 (2004, Page No-233, SSR Item No.-26.33

Providing second class Burnt Brick masonry with convent ional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete.Sr.No.-894, Chapter-Brick Masonry, Reference No-BDG 1, Additional Specification.-Bd.G. 1 PageOne Number 313, Page No-242, SSR Item No.-27.01

Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete .Sr.No.-897, Chapter-Brick Masonry, Reference No-BDG 5, Additional Specification.-Bd.G.5 Page One Number 315, Page No-242, SSR Item No.-27.05

Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the sur face of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for four teen days scaffolding etc. complete. Sr.No.-968, Chapter-Plastering and Pointing, Reference No-Bd.L.7, Additional Specification.-Page One Number 369, Page No-257, SSR Item No.-32.11

Providing internal cement plaster 12mm thick in single coat in cement mortar 1:3 without neeru finish to concrete or brick surfaces, in all position including scaffolding and curing etc. complete.Sr.No.-964, Chapter-Plastering and Pointing, Reference No-BDL 2B ,Additional Specification.-Bd.L.2 Page One Number 368, Page No-256, SSR Item No.-32.05

Providing internal cement plaster 20 mm thick in Single coats in cement mortar 1:5 with out neeru finish,to concrete, brick surface, in all positions including scaffolding and curing etc. complete. Sr.No.-965, Chapter-Plastering and Pointing, Reference No-BDL 4 ,Additional Specification.-Page One Number 369, Page No-257, SSR Item No.-32.06

Providing and applying plastic emulsion paint of approved quality, colour and shade to old and new surfaces in two coatsincluding scaffolding, preparing the surface. (excluding the primer coat)etc. complete. Sr.No.-1112, Chapter-Colouring, Reference No-BDP 6 ,Additional Specification.-Bd.P.6 Page One Number 414, Page No-280, SSR Item No.-36.12

Providing and applying plastic emulsion paint of approved quality, colour and shade to old and new surfaces in single coat including scaffolding, preparing the surface. (excluding the primer coat ) etc. complete. Sr.No.-1116, Chapter-Colouring, Reference No-BDP 6 ,Additional Specification.-Bd.P.6 Page One Number 414, Page No-280, SSR Item No.-36.16

Providing and laying vitrified matt fininsh tiles having size 590 mm to 605 mm x to 605 mm of 8 to10 mm thickness and confirming IS.15622-2006 (Group Bla ) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement morar including neat cement float, filling joints, curing and cleaning etc .complete. Sr.No.-1029, Chapter-Paving Flooring and dado, Reference No-BDM 12 ,Additional Specification.-Bd.M.12 Page One Number 385, Page No-217, SSR Item No.-33.42

Providing and laying vitrified matt finish tiles having size 590 mm to 605 mm x to 605 mm of 8 to10mm thickness and confirming IS.15622-2006(Group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc .complete. Sr.No.-1030, Chapter-Paving Flooring and dado, Reference No-BDM 12, Additional Specification.-Bd.M. 12 Page One Number385, Page No-266, SSR Item No.-33.43

Providing and laying machine cut machine polished machine cut Kota stone slabs 20 to 25mm thick for treads and risers of steps and staircases, with rounded nosing for the treads on abed of 1:4 cement mortar including cement float ,filling joints withneat cement slurry, curing, polishing and cleaning etc. complete. Sr.No.-1005, Chapter-Paving Flooring and dado, Reference No-BDM 22B, Additional Specification.-Bd.M.22 Page One Number 390, Page No-215, SSR Item No.-33.18

BASIC TEST OF CONCRETE-Compressive Strength OF C.C. Cube (Set of 3 cubes).

a) For sand = Royalty + surcharge (2%) + Distt. Mineral Foundation Cess (10%) = 211.95+4.23+21.19 = 237.37 Per Cum

b) For All Other Minerals = Royalty + surcharge (2%) = 211.95+4.23 = 216.18 per cum

GST 18 %

ADD 1% LABOUR INSURANCE

ADD ELECTRIFICATON CHRGES

CONTENGIENCES 5%