Directorate Of Municipal Administration Tender

Item no 4:-Providing earth work in embankment with approved materials obtained from departmental land or other sources upto lead of 50m. Including all lifts,laying in layers of 20cm. To 30 cm. thickness breaking clods,dressing to the required lines,curves,grades and section,watering and compaction withvibratory roller with V-sat attachment to achive not less than 97% of standard proctor density etc. complete

Item No 5:-Providing soiling using 80mm size trap metal in lyres of 15 cm each including filling voids with sand,ramming,watering etc. complete.

Item No 6:- Providing and laying Cast in situ/Ready mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand.

Item No 7:- Providing and laying in situ/Ready mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding einforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand.

Item No.8:-Providing and laying Cast in situ/Ready Mix Cement Concrete M-20 of trap/granite/quartzite/gneissmetal for R.C.C slabs and landings as per detailed designs and drawings including centering,formwork,cover blocks,laying/pumping,compactionfinishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to provided and curing etc. complete,(Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. With natural sand/V.S.I quality Artificial sand

Item No.9:- Providing and laying Cast in situ/Ready Mix M-10 grade cement concret for head walls ofCD work/retaining walls etc. including necessary form work,compaction,finishing and curing etc. complete.(with r)versiblr drum type mixer/concrete batch mix plant (pan mixer) with SCADA with Natural/VSI Standard Artificial Sand, cement 4.05 bags/cumt)

Item No.10:-Providing and fixing in position HCRM/CRS(Corrosion Resistant Steel) bar reinforcement of various diameterfor R.C.C,pile caps,footings,foundations,slabs,beams columns,canopies, staircase,newels,chajjas,lintels pardis,copings,fins,arches etc. as per detailed designs,drawings and schedules. including cutting,bending,hooking the bars,binding with wires or tack welding and supporting as required complete.

Item No.11:-Dewatering on BHP basis by using water pump including diversion of stream,providing cofferdams,earthem bunds etc. as may be necessary for foundation and other part of the works and pumping out water during and after excavation as may be required by using 10.0 to 19.0 BHP pump etc. complete.(prior approval of Superintending Engineer will be necessary)

Item No.12:-Providing and fixing board displaying information, such as 'Name of work,Tender cost,Name of Contractor,Work completion and liability period etc.' having rectangular shape of 1.20m*0.90 m size made out 18 guage (1.25mm) thick mild steel painted with one coat of Zinc chromate stoving primer and two coats enamel paint on front side and grey stove enamel on back side and border/messages/symbols etc. with approved colour shade paint complete, on M.S angle of size 35*35*3 mm frame with properly cross braced M.S. angles of size 35mm*35mm*3mm duly painted including Two M.S. angle iron posts size 65mm*65mm*6mm, 3.65m long painted with alternate black and white bands of 25 cm width including, all fixtures etc. and fixing the boards in 1:4:8 concret block of size 60 cm* 60 cm * 75 cm including excavation,refilling,transportation,and labour etc, complete. Spec.No.As directed by Engineer in Charge

Item No.13:- Payment of Royalty charges if contractor produced authorised Chalans.

Item No.14:-Payment of testing charges if contractor produced authorised results Concrete Test A) Basic Test of sand

B) Basic Test of Metal

C) Basic Test of Cement

D) Concrete Cube(Compression Test)

E) Mix Design