Directorate Of Municipal Administration Tender

Dismantling stone masonry in lime or cement mortar including stacking the materils as directed with all leads, lifts etc.

Removing cement tiles, or marble or polished shahabad floor or dado with out bed concrete including stacking the materials as directed with all leads, lifts etc. complete

Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 0.00 to 1.50 m.) By Manual Means

Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete.

Providing & laying Cast insitu/ ReadyMix cement concrete in M15 of trap/granite/ quartzite/ gneiss metal for steps including steel centering, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc.complete.The Cement Mortar1:3 plaster is considered for rendering uneven and honeycombed surface, only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. with fully automatic microprocessor based PLC with SCADA enabled reversible Drum Type mixer /concrete Batchmix plant (Panmixer) etc. comp. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)

Providing laterite stone masonry in cement mortar 1:6 in foundation & plinth including racking out joints when plastering is to be done / striking joints when no plastering is to be done watering and scaffolding.

Providing laterite stone masonry in cement mortar 1:6 in Superstructure including racking out joints when plastering is to be done / striking joints when no plastering is to be done watering and scaffolding.

Providing and fixing in position after hoisting, precast 1:2 cement mortar reinforced jali 80mm thick with 3mm diameter mild steel bar reinforcement, of approved design on both sides, fixing in cement mortar 1:3 and curing etc .complete.

Providing External cement plaster 20mm thick in Single coats in cement mortar 1:5 without neeru finish, to concrete,brick surface,in all positions including scaffolding & curing etc comp.

Providing & applying two coats of exterior weather shield paint of approved manufacture & of approved colour to the plastered surfaces including cleaning, preparing the plaster surface, applying primer coat, scaffolding if necessary, & watering the surface for two days etc comp.

Providing and laying pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and technical specifications etc. complete. (by stone/boulder)

Providing and fixing heavy duty interlocking concrete RUBBER MOULD GLOSSY PAVING BLOCKS of 60 millimeter thickness of having a strength of 400 Kilogram /sq.m of approved quality and shape on a bed of crushed sand of 25 to 30 millimeter thick including striking joints and cleaning etc. complete. ( using 100%crushed sand )

Providing & fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion & liability period etc', having rectangular shape of 1.20m x 0.90m size made out 18gauge(1.25mm) thick mild steel sheet painted with one coat of Zinc chromates to ving primer & two coats of enamel paint on front side & greys to ve enamel on back side & border /messages /symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x35 x3mm frame with properly cross braced M.S.angles of size 35mm x35mmx3mm duly painted including Two M.S.angle iron posts of size 65mm x65mm x6mm, 3.65 m long painted with alternate black & white bands of 25cm width including all fixtures etc.& fixing the boards in 1:4:8 concrete block of size 60cmx60cmx75cm includ, excavation, refilling, transportation,& labour etc comp.Spec.Number As directed by Engineer in Charge