Directorate Of Municipal Administration Tender

Providing soling using 80 mm size granite / quartzite / gneiss / trap metal in 15 cm. layer including hand packing filling voids with sand / grit, ramming, watering complete. Rate as per R.A. Attached

Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite / gneiss metal for foundation and bedding including bailing out water, formwork, laying/pumping compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand Rate as per R.A. Attached

Providing and laying in situ/Ready Mix cement concrete M-20 of trap/granite /quartzite/gneiss metal for R.C. C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, formwork, laying/ pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided(Excluding reinforcement and structural steel) etc. complete. with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer / concrete Batch mx plant (Pan mixer) etc complete. With natural sand/V. S. I. quality Artificial Sand Rate as per R.A. Attached

Providing and casting in situ cement concrete of M-20 grade of trap / granite iquartzite/gneiss metal for R.C C. columns as per detailed design and drawings or as directed, including steel centering, plywood / steel formwork, compaction, finishing uneven and honeycombed surface. Rate as per R.A. Attached

Providing and laying Cast in situ/Ready Mix cement concrete M 20 of trap / granite /quartzite/gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc complete (Excluding reinforcement and structural steel) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer)etc. complete. With natural sand/V.S.I. quality Artificial Sand Rate as per R.A. Attached

Providing fly ash brick masonry with conventional / I.S. type fly ash bricks in C M 1:6 in foundation and plinth including bailing out water manually striking joints, racking out joints watering and scaffolding etc. complete. Rate as per R.A. Attached

Providing and filing in the plinth with contractors approved material sand/ murum/ stone dust including watering, compaction complete Rate as per R.A. Attached

Providing and casting in situ cement concrete of M-20 grade of trap/ granite/quartzite /gneiss metal for R.C.C. slabs and landings as per detailed design and drawings Rate as per R.A. Attached

Providing and fixing in position steel reinforcement of TMT Fe 500 Grade steel bars of various diameters for R.C.C pile caps footings, foundations, slabs beams columns canopies, staircase, newels, chaijjas, lintels pardis, coping, fins, arches etc. as per detailed designs, drawings and schedules including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required completed. Rate as per R.A. Attached

Providing fly ash brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete. Rate as per R.A. Attached

providing internal cement plaster 20mm thick in a single coat in cement mortar 1:5 to concrete, brick surfaces with putty in two coats to receive approved paint in all positions including scaffolding and curing Providing groove at joint of B.B. Masonry and concrete members complete. Rate as per R.A. Attached

Providing internal cement plaster 12mm thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. Rate as per R.A. Attached

Providing internal cement plaster 6 mm thick in a single coat in cement mortar 1:3 with puty in two coats to receive approved paint in all positions including scaffolding and curing Providing groove at joint of B.B. Masonry and concrete members complete. (In celling) Rate as per R.A. Attached

Providing and applying interior wall finish luster of Asian /Berger / Nerolac / Dulux Paints or equivalent make on internal wall surface as detailed below Scrapping the surface with emery paper and wipe clean. Applying Asian / Berger /Nerolac / Duuex Paints or equivalent wall primer with brush with mineral turpentine with brush 8 to 10% and oil 15 to 20% with roller and allowing to dry for a period 6 to 8 hours. Applying Asian / Berger / Nerolac / Dulex Paints or equivalent Acrylic wall putty with appropriate proportion of water allowing to dry for period 4 to 6 hours. Scrapping with Emery paper 180 and wipe clean. Applying Asian / Berger / Nerolac / Dulux Paints or equivalent wall primer with brush with mineral turpentine 8 to 10% and oil 15 to 20% with roller Scrapping Emery paper 320 and wipe clean, Applying Asian / Berger /Nerolac / Dulux Paints or equivalent interior wall finish luster 1st coat with brush/rubber/spray with mineral turpentine 7 to 9% and Oil with roller 19 to 21% After 8 hours of activity Applying 2nd coat of Asian / Berger / Nerolac / Dulux Paints or equivalent interior wall finish Lustre with mineral turpentine 7 to 9 % with brush and Oil with roller 19 to 21% after allowing dry for the period of 6 to 8 hours activity. (With prior approval of S.E.) Rate as per R.A. Attached

Providing and applying pearl / luster finish paint of approved colour and shade to the existing plaster surface Including scaffolding, preparing the surface, applying the acrylic wall putti etc. complete. Rate as per R.A. Attached