Directorate Of Municipal Administration Tender

Proving and Fixing of Reception table -Size:- 1500W x 725D x 1180H Model REFLECTION Make Godrej or equivalent Work Surface: Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Access Flap provided on work surface for wire management. Wire management: Power box made with 0.8 mm thick CRCA (IS: 513), with switch plate (8+3 Module cutout provision for Anchor Roma). This is fixed with worktop along the width at Access Flap position. Modesty: Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Understructure: Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. The installation is including labour, loading, unloading with all necessary fixtures as directed by Engineer in charge etc. and excluding GST etc completed.

Proving and Fixing of Reception table -Size:- 2400W X 1770D X 740H Model REFLECTION Make Godrej or equivalent Work Surface: Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Access Flap provided on work surface for wire management. Wire management: Power box made with 0.8 mm thick CRCA (IS: 513), with switch plate (8+3 Module cutout provision for Anchor Roma). This is fixed with worktop along the width at Access Flap position. Modesty: Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Understructure: Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. The installation is including labour, loading, unloading with all necessary fixtures as directed by Engineer in charge etc. and excluding GST etc completed.

Providing and Fixing of two height table APO FRONTIER INTERACTION DESK WITH DRAWER (1050mm600mm ) 'Frontier' is a Panel based furniture system for customer Interaction. This system has panel in 52.4mm thick. The 52.4 mm panel has more elaborate and flexible construction offering various functional and decorative finishes as well as cable management capacity. These panels can be connected together with various post connectors in many geometric configurations and support worktops via brackets and legs to construct workstations to suite a wide spectrum of banking layouts. Frontier offers a unique solution for today’s banking workstation needs. The installation is including labour, loading, unloading with all necessary fixtures as directed by Engineer in charge etc. and excluding GST etc completed.

Providing and Fixing of two height table APO FRONTIER INTERACTION DESK WITH DRAWER (1200mm X 600mm) 'Frontier' is a Panel based furniture system for customer Interaction. This system has panel in 52.4mm thick. The 52.4 mm panel has more elaborate and flexible construction offering various functional and decorative finishes as well as cable management capacity. These panels can be connected together with various post connectors in many geometric configurations and support worktops via brackets and legs to construct workstations to suite a wide spectrum of banking layouts. Frontier offers a unique solution for today’s banking workstation needs. The installation is including labour, loading, unloading with all necessary fixtures as directed by Engineer in charge etc. and excluding GST etc completed.

STAFF TABLE (WORKSTATIONS) - MT 1500 X 1500 X 600, ERU 900 x 450 x 750; NOVA 646 x 390 x 435 Providing and fixing of WISH panel & tile based modular workstation, with partition thickness as 52.4 mm thk and ht - 1200 including powder coated aluminium trims. SPLIT Tiles on main spine: finishes for the top tiles on the user side and rare side would be along with Clear glass tile. INTERMEDIATE BLOCKS on main spine Intermediate blocks are given in fabric + Fabric finsh. Wire Management through main spine- Wires shall be taken into the system through cable ducts from the junction boxes and it is carried upto the panels through concealed conduits inside the blocks. Side panels - out of 25 mm thk prelam particle board with flat pvc lipping edge banding considered only on the open end conditions . System shall also have 120 mm high powder coated standalone panel legs to give the system an elevated look. POSTFORMED Worksurface - out of 25 mm thk prelam particle board with flat pvc lipping edge banding of Size:- 1500 mm w1 X 1500 MM w2 x 600 mm d. Pedestals with or without legs - Nova pedestal flat metal front, full ht free standing central locking of Size:- 390 mm w x 435 mm d x 646 mm ht 3dr = 2box+1file. Note: All partitions and side panels have levelling screws for adjustment in case of Uneven floor to take care of +/- 40 mm of uneven flooring. The installation is including labour, loading, unloading with all necessary fixtures as directed by Engineer in charge etc. and excluding GST etc completed.

Providing and Fixing of Chair for security & staff -APO MOTION MESH CHAIR SEAT/BACK ASSEMBLY: The cushioned seat assembly consists of seat base moulded in glass-filled Poly-amide, moulded Polyurethane foam & upholstered with high stretch knitted polyester fabric. The Back is injection moulded in glass filled Polypropylene which is upholstered with Mesh fabric. The back consist of adjustable lumbar support made of injection moulded Polypropylene having an adjustment of 3.0 ±0.1 cm. * MeshBackSize:- : 45.5 cm. (W) x 54.0 cm. (H) * Seat Size:- : 48.5 cm. (W) x 49.0 cm. (D) 2. HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam used in seat and back cushion is moulded in Density Min 48 kg/m³, and hardness load 15 ± 2 kgf as per IS:7888 for 25% compression. 3. TILT MECHANISM, SPINES & SPINE CONNECTOR: The seat and back are firmly connected to the base frame and are cantilevered in such a way that it gives a multi-dimensional movement possibility just with a simple lean on the sides or back, without need for complex manual adjustments. The cantilevered seat offers impact cushioning while sitting and synchronises with the back movement during posture changes. The "S" shaped spines moulded in high strength glass-filled Poly-amide and the spine connector moulded in glass-filled Poly-amide form the back-spine structure involved in multi-dimensional recline motion. The variable tilt angle recline motion can be adjusted with 3 position Tilt Limit feature which is inbuilt in seat base and the tension (return force) is user weight dependent. 4. ADJUSTABLE ARMRESTS: 3D ARMRESTS 5. PNEUMATIC HEIGHT ADJUSTMENT: The seating height can be adjusted with a pneumatic gas-lift having an adjustment stroke of 9.2 ± 0.3 cm 6. PEDESTAL ASSEMBLY: The pedestal is injection moulded in glass-filled Poly-amide and fitted with 5 nos. 7. Twin wheel castors. The pedestal is 66.0±0.5 cm. pitch centre diameter and 76.0±1.0 cm. with castors. The installation is including labour, loading, unloading with all necessary fixtures as directed by Engineer in charge etc. and excluding GST etc completed.

Providing and Fixing of Executive table MT 1800 x 750 x 743 & ERU 900x450x743 for cabins UPBEAT CABIN TABLE UPBEAT is a Modular desk based system of ht. 1200 mm. Cello legs This leg has inclination in one plane. Cello leg has an extrusion cover made of Aluminum alloy which can have different color. Wire Management Single Power box with raiser for Manager Modules, Single tables (8+3 Anchor Roma). Soft closing access flap with brush. Metal modesty: Metal modesty is made from 0.8 mm thick CRCA. Metal modesty are mounted on the worktop with the help of the modesty mounting brackets made of 3 mm thick HR Worktop: 25mm thk prelaminated partical board with pvc lipping. The installation is including labour, loading, unloading with all necessary fixtures as directed by Engineer in charge etc. and excluding GST etc completed.

Providing and Fixing of Cabin chairs for HOD APO THRILL HIGH BACK CUSHION SEAT/BACK ASSEMBLY: The back is made up of 1.2 ±0.1cm. thick hot-pressed plywood & seat is made up of 1.5 ±0.1cm. thick hot-pressed plywood measured and upholstered with Letherette upholstery covers and moulded Polyurethane foam. The back foam is designed with contoured foam lumbar support. The seat has extra thick foam on front edge to give comfort to popliteal area.The Recron filling done in seat & back ( Executive chairs only) for extra fluffiness and comfort in chair. The chair seat & back Size:- are HIGH BACK Size:- 51.5 cm. (W) x 82.0 cm. (H) SEAT Size:- 53.5 cm. (W) x 51.0 cm. (D) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam is moulded with density = 45±2 kg/m3 and hardness load 14 ± 2 kgf as per IS:7888 for 25% compression. ARMRESTS (THRILL PLUS CHAIR) : 3D armrest. CENTER TILT SYNCHRO MECHANISM WITH MULTI LOCK : The mechanism is designed with the following features: · 360° revolving type. · 3 position locking with anti shock mechanism. · Tilt tension adjustment PNEUMATIC HEIGHT ADJUSTMENT : The pneumatic height adjustment has an adjustment stroke of 9.5 ± 0.3 cm PEDESTAL ASSEMBLY ( THRILL PLUS) : The pedestal is in chrome finish and fitted with 5 nos. twin wheel castors. The pedestal is 66.1 ±0.5cm. pitch-center dia. (76.1 ±1.0cm with castors). TWIN WHEEL CASTORS : The twin wheel castors are injection moulded in Black Nylon. WIDTH (W): 76.1 CM. DEPTH (D): 76.1 CM. HEIGHT (H): 113.5-123.5 CM. SEAT HEIGHT (SH): 46.0-56.0 CM. The installation is including labour, loading, unloading with all necessary fixtures as directed by Engineer in charge etc. and excluding GST etc completed.

Providing and Fixing of Staff & Cabin Visitors chairs APO MOTION CUSHIONED VISITOR CHAIR: 1. SEAT/BACK ASSEMBLY: The cushioned seat assembly consists of seat base moulded in glass-filled Poly-amide, moulded Polyurethane foam & upholstered with high stretch knitted polyester fabric. The back consist of adjustable lumbar support made of injection moulded Polypropylene having an adjustment of 3.0 ±0.1 cm. * MeshBackSize:- : 45.5 cm. (W) x 54.0 cm. (H) * Seat Size:- : 48.5 cm. (W) x 49.0 cm. (D) 2. HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam used in seat and back cushion is moulded in Density Min 48 kg/m³, and hardness load 15 ± 2 kgf as per IS:7888 for 25% compression. 3. TILT MECHANISM, SPINES & SPINE CONNECTOR: The seat and back are firmly connected to the baseframe and are cantilevered in such a way that it gives a multi-dimensional movement possibility just with a simple lean on the sides or back, without need for complex manual adjustments. The cantilevered seat offers impact cushioning while sitting and synchronises with the back movement during posture changes. The "S" shaped spines moulded in high strength glass-filled Poly-amide and the spine connector moulded in glass-filled Poly-amide form the back-spine structure involved in multi-dimensional recline motion. The variable tilt angle recline motion can be adjusted with 3 position Tilt Limit feature which is inbuilt in seat base and the tension (return force) is user weight dependent. 4. VISITOR FRAMEL ASSEMBLY: The powder coated (DFT 40-60 micron) tubular frame is cantilever type and made of dia 2.54 +- 0.03cm x 0.3cm+-0.016cm ERW tube. Shoes are made of glass-filled Poly-amide and fixed to the tubular frame.

Providing & Fixing of public seating (Size:-: 1695mm x 638mm x 78mm) MATRIX SEAT SHELL :The seat shell should be a welded assembly of seat,back and side frame. The seat and back should be made of 0.12±0.013cm thk CR steel sheet with oblong perforations.They should be welded to sideframe of Size:- 3.2±0.05cm x 0.5 ± 0.05 cm thk HR steel.The welded assembly should be powder coated ( DFT 40-60 microns ). The seat has a front water fall edge to provide popliteal clearance for comfortable seating. It also has a buttock support curve that not only provides rear support but also prevents small children from falling through the gap between seat and back. Clean and flat surfaces of seat and back aids in easy maintenance. * SEAT Size:- : 47.8 cm (W) x 44.6 cm (D) * BACK Size:- : 41.6 cm (W) x 23.0 cm (H) Understructure assembly consshould be ts of connecting beam and leg assembly made of M.S. E.R.W. oblong tube of Size:- 7.5±0.03cm x 2.5±0.03cm x 0.2±0.016cm thk.The welded structure assembly should be powder coated ( DFT 40-60 microns ).The leg assembly should be fitted with shoes and levellers in Nylon. The leg structure should be designed with minimal should be a of contact close to ground providing easy access for cleaning purposes. The shoes fitted to leg assembly help in aligning the structure for back to back arrangements. Levellers take cshould be of uneven flooring.Connecting beam should be fitted with snap locking end cap.lt also aids in side-by-side understructure alignment . Armrest assembly consshould be ts of armrest frame and armrest pad . The armrest frame should be made up of Size:- 3.175±0.05cm x 0.47±0.027cm thk HR steel and it should be powder coated ( DFT 40-60 microns ). Armrest pad should be injection molded in Nylon and should be fitted onto the armrest frame. The installation is including labour, loading, unloading with all necessary fixtures as directed by Engineer in charge etc. and excluding GST etc completed.

Providing and Fixing of filing storage - Size:- 900mm x 450mm x 750mm APO RES+ STORAGE Aesthetically appealing completely knock down construction. Made from combination of side panel(0.5mm CRCA), Bottom panel(0.5mm CRCA), Back panel(0.5mm for 750mm and 900width Storage Units), Top Bottom stiffener(1.2mm CRCA) and End Cover(0.6mm CRCA). CRCA 'D' Grade as per IS-513 All metal panels are coated with Epoxy polyster powder of 50±10 microns thickness. Wood Top Panel (Made of 25mm thick pre-laminate board (PLB) conforming to IS-14587:1998, Edge banded with matching 2 mm thick PVC lipping) fixed shelves made up of 12 bend panel made of 0.7mm Thick CRCA (D Grade,IS-513) Metal base plate (1.6mm CRCA) with Screw type adjustable leveler with plastic base provides vertical adjustment for floor unevenness and leveling of units. Height of Leveller is 50mm and 25mm Leveller adjustment available Door- 1.Made from 0.6mm Thick CRCA with 0.5mm Thick CRCA Stiffner (*CRCA D Grade, IS-513) 2.Soft closing Hinges Available with 105° door opening angle 3.All metal panels are coated with Epoxy polyster powder of 50±10 microns thickness. 4.Inbuilt Handle Cam Lock-3 Way locking provision.-Click action mechanism.-Key removable in locked and unlocked positions.-Zinc alloy die cast housing. The installation is including labour, loading, unloading with all necessary fixtures as directed by Engineer in charge etc. and excluding GST etc completed.

Providing and Fixing of filing storage - Size:- 600mm x 450mm x 750mm APO RES+ STORAGE Aesthetically appealing completely knock down construction. Made from combination of side panel(0.5mm CRCA), Bottom panel(0.5mm CRCA), Back panel(0.5mm for 750mm and 900width Storage Units), Top Bottom stiffener(1.2mm CRCA) and End Cover(0.6mm CRCA). CRCA 'D' Grade as per IS-513 All metal panels are coated with Epoxy polyster powder of 50±10 microns thickness. Wood Top Panel (Made of 25mm thick pre-laminate board (PLB) conforming to IS-14587:1998, Edge banded with matching 2 mm thick PVC lipping) fixed shelves made up of 12 bend panel made of 0.7mm Thick CRCA (D Grade,IS-513) Metal base plate (1.6mm CRCA) with Screw type adjustable leveler with plastic base provides vertical adjustment for floor unevenness and leveling of units. Height of Leveller is 50mm and 25mm Leveller adjustment available Door- 1.Made from 0.6mm Thick CRCA with 0.5mm Thick CRCA Stiffner (*CRCA D Grade, IS-513) 2.Soft closing Hinges Available with 105° door opening angle 3.All metal panels are coated with Epoxy polyster powder of 50±10 microns thickness. 4.Inbuilt Handle Cam Lock-3 Way locking provision.-Click action mechanism.-Key removable in locked and unlocked positions.-Zinc alloy die cast housing. The installation is including labour, loading, unloading with all necessary fixtures as directed by Engineer in charge etc. and excluding GST etc completed.

Providing and Fixing of filing storage - ( 900mm x 450mm x 1030mm ) APO RES+ STORAGE WITH PLANTER BOX Aesthetically appealing completely knock down construction. Made from combination of side panel(0.5mm CRCA), Bottom panel(0.5mm CRCA), Back panel(0.5mm for 750mm and 900width Storage Units), Top Bottom stiffener(1.2mm CRCA) and End Cover(0.6mm CRCA). CRCA 'D' Grade as per IS-513 All metal panels are coated with Epoxy polyster powder of 50±10 microns thickness. Wood Top Panel (Made of 25mm thick pre-laminate board (PLB) conforming to IS-14587:1998, Edge banded with matching 2 mm thick PVC lipping) fixed shelves made up of 12 bend panel made of 0.7mm Thick CRCA (D Grade,IS-513) Metal base plate (1.6mm CRCA) with Screw type adjustable leveler with plastic base provides vertical adjustment for floor unevenness and leveling of units. Height of Leveller is 50mm and 25mm Leveller adjustment available Door- 1.Made from 0.6mm Thick CRCA with 0.5mm Thick CRCA Stiffner (*CRCA D Grade, IS-513) 2.Soft closing Hinges Available with 105° door opening angle 3.All metal panels are coated with Epoxy polyster powder of 50±10 microns thickness. 4.Inbuilt Handle Cam Lock-3 Way locking provision.-Click action mechanism.-Key removable in locked and unlocked positions.-Zinc alloy die cast housing. The installation is including labour, loading, unloading with all necessary fixtures as directed by Engineer in charge etc. and excluding GST etc completed.

Providing and Fixing of Standing table - (900mm x 450mm x 1030mm) RES+ STANDING TABLE The Understructure: It consists of Side panels and Middle Panel of 25mm Pre-laminated twin (PLT) board of E1-P2 gradeand approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.The product has a knock-down construction Footrest: The foot rest frame is made of Dia 32 x 2 mm thk SS 304 tube, welded together usingTungsten Inert gas welding and having a brush finish for better aesthetics Worktop: Wood Top Panel (Made of 25mm thick pre-laminate board (PLB) conforming to IS-14587:1998, Edge banded with matching 2 mm thick PVC lipping ) The installation is including labour, loading, unloading with all necessary fixtures as directed by Engineer in charge etc. and excluding GST etc completed.

Providing and Fixing of full height storage - Size:- 1200mm x 450mm x 2275mm, APO GAIN PRO STORAGE Construction of Material: Aesthetically appealing completely knockdown construction. The add-on Units are stacked widthwise to form a row of lockers. Legs fitted with screw type leveller Made from combination of top panel, side panel, bottom panel, back panel, top bottom stiffner and end cover. CRCA 'D' grade as per IS-513 Doors: Doors made of 0.6mm thick CRCA (D-Grade, IS 513 Soft closing Hindge Shelving: It is a 10 bend panel made of 0.5mm thick CRCA (D-grade, IS 513) Uniformly distributed load capacity of each shelf is 20KG. Locking Options: CAM Lock, 4 Digit combination numeric lock, Digital Lock, RFID Lock. Finish: Epoxy polyester Powder coated to the thickness of 50 microns.(+/- 10 micron) The installation is including labour, loading, unloading with all necessary fixtures as directed by Engineer in charge etc. and excluding GST etc completed.

Providing and Fixing of full height storage -Size:- 900mm x 450mm x 2275mm APO GAIN PRO STORAGE Construction of Material: Aesthetically appealing completely knockdown construction. The add-on Units are stacked widthwise to form a row of lockers. Legs fitted with screw type leveller Made from combination of top panel, side panel, bottom panel, back panel, top bottom stiffner and end cover. CRCA 'D' grade as per IS-513 Doors: Doors made of 0.6mm thick CRCA (D-Grade, IS 513 Soft closing Hindge Shelving: It is a 10 bend panel made of 0.5mm thick CRCA (D-grade, IS 513) Uniformly distributed load capacity of each shelf is 20KG. Locking Options: CAM Lock, 4 Digit combination numeric lock, Digital Lock, RFID Lock. Finish: Epoxy polyester Powder coated to the thickness of 50 microns.(+/- 10 micron) The installation is including labour, loading, unloading with all necessary fixtures as directed by Engineer in charge etc. and excluding GST etc completed.

Providing and Fixing of full height storage -Size:- 600mm x 450mm x 2275mm APO GAIN PRO STORAGE Construction of Material: Aesthetically appealing completely knockdown construction. The add-on Units are stacked widthwise to form a row of lockers. Legs fitted with screw type leveller Made from combination of top panel, side panel, bottom panel, back panel, top bottom stiffner and end cover. CRCA 'D' grade as per IS-513 Doors: Doors made of 0.6mm thick CRCA (D-Grade, IS 513 Soft closing Hindge Shelving: It is a 10 bend panel made of 0.5mm thick CRCA (D-grade, IS 513) Uniformly distributed load capacity of each shelf is 20KG. Locking Options: CAM Lock, 4 Digit combination numeric lock, Digital Lock, RFID Lock. Finish: Epoxy polyester Powder coated to the thickness of 50 microns.(+/- 10 micron) The installation is including labour, loading, unloading with all necessary fixtures as directed by Engineer in charge etc. and excluding GST etc completed.

Providing and Fixing of table for GAT NETE Size:-s: MT 2100 x 1050 x 750 ; ERU 1200 x 500 x 750. CIGNUS TABLE "Primary Work Surface:Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Secondary Work Surface:Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Softclosing access flap with in-build power box are provided on work surface for wire management. Modesty Panel:Made of 25mm thick MDF one side laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top Under- structure:Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Integrated Pedestal:Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Drawer fronts made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top Pedstal construction is BOX-BOX-FILE type which Uses powder coated 400 MM long metal Panel Drawer Slides. Drawer extension is 325 MM. Drawers have a soft closing & anti slam mechanism. Handles are provided for ease of opening. Pedestal is provided with lock for security." The installation is including labour, loading, unloading with all necessary fixtures as directed by Engineer in charge etc. and excluding GST etc completed.

Providing and Fixing of Cabin chairs for GAT NETE & SUBJECT COMMITEE HEADS, etc. APO GRETA WITH HEADREST SEAT ASSEMBLY: The seat is made up of 1.5 ± 0.1 cm thick hot - pressed plywood upholstered with letherete and moulded polyurethane foam. SEAT Size:-: 51.8cm (W) x 49.7cm (D) BACK ASSEMBLY: The Back is injection moulded in glass filled Nylon which is upholstered with Mesh fabric.The back consist of adjustable Lumbar support made of injection moulded Polypropylene having an adjustment of 5.0 ±0.1 cm. BACK Size:-: 47.9 cm(W) x 66.9 cm (H) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane seat foam is moulded with density 45+/-2 kg/m³ and hardness 14 ± 2 kgf as per IS:7888 for 25% compression. ARMRESTS (ADJUSTABLE) :The height adjustable armrest is made of Polypropylene and can be adjusted to 6.0±0.1cm height.It also has swivel and To and Fro adjustment with moulded PU armtop. ACTIVE BIO-SYNCHRO MECHANISM: The adjustable tilting mechanism is designed with the following features: · 360° revolving type · Front-pivot for tilt with feet resting on ground & continuous lumber support ensuring more comfort. · Tilt tension adjustment can be operated in seating position. · 5 position Tilt limiter giving option of variable tilt angle to the chair. · Seat / back tilting ratio of 1:2. · The mechanism housing is made up of HPDC Aluminium & black powder coated (DFT 40 to 60 micron). HEADREST: The Headrest sub-assembly is made up of injection moulded glass filled Polypropylene which is upholstered with moulded HR polyurethane foam and fabric. It has an adjustment of 3.0 ± 0.1cm & it is assembled over GRETA 2.0 Full back chair. The complete headrest assembly is retro fit to the main chair. The installation is including labour, loading, unloading with all necessary fixtures as directed by Engineer in charge etc. and excluding GST etc completed.

Providing & Fixing of Cabin table of Size:- 2350mm x 2350mm x 750mm for - Deputy President and Deputy C.O. APO ARISTO Primary Work Surface Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top Soft closing access flap with in-build power box are provided on work surface for wire management Secondary Work Surface Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Modesty Panel Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Under structure Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Integrated Pedestal Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Drawer fronts made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top Pedestal construction is BOX-BOX-FILE type which Uses powder coated 400 MM long metal Panel Drawer Slides. Drawer extension is 325 MM. Drawers have a soft closing & anti slam mechanism. Handles are provided for ease of opening. Pedestals are provided with lock for security. The installation is including labour, loading, unloading with all necessary fixtures as directed by Engineer in charge etc. and excluding GST etc completed. Cabin table backunit of Size:- 2350x500x1800 for - Deputy President and Deputy C.O. APO ARISTO BACK UNIT Top Panel:Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.Slide Door Unit:Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping for body panels like side, bottom,back and shelves. Shutters are made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top.Shutters have a soft closing & anti slam mechanism.Handles are provided for ease of opening.Storage is provided with lock for security.Display/Storage Unit:Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping for body panels like side,back and shelves.Doors are made of 25mm thick MDF one side pre-laminate board confirming toIS-14587:1998 with 0.4mm PVC membrane pressed on to top.Top panel of display unit Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. The installation is including labour, loading, unloading with all necessary fixtures as directed by Engineer in charge etc. and excluding GST etc completed.

Providing and Fixing of Chairs for GAT Nete & Commity heads MARVEL HIGH BACK CHAIR SEAT/BACK ASSEMBLY : SEAT/BACK ASSEMBLY : The Cushioned seat should be made of Injection molded Plastic outer & inner. Plastic Inner should be upholstered with leatherette and moulded High Resilience (HR) Polyurethane foam of Density 45±2 kg/m3,and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression.The Cushioned back should be made of PU Foam with insitu molded MS E.R.W Round Tube of Size:- 1.9±0.03cm x 0.16 ±0.0128cm. It upholstered with Leatherette Seat Size:- : 47.0 cm. (W) x 48.0 cm. (D) HIGH BACK Size:-: 47.7 cm. (W) x 76.4 cm ARMRESTS : The armrest top should be moulded from polyurethane(PU) and mounted on to a drop lift adjustable type tubular armrest support made of 03.81±0.03 cm x 0.2±0.01 cm thk M.S. E.R.W tube having chrome plated finish.The armrest height adjustable up to 6.5±0.5cm in 5 steps. ACTIVE BIO-SYNCHRO MECHANISM : The adjustable tilting mechanism should be designed with the following features: • 360' revolving type. • Front-pivot for tilt with feet resting on ground and continuous lumbar support ensuring more comfort. • Tilt tension adjustment can be operated in seating position. • 5-position Tilt limiter giving option of variable tilt angle to the chair. • Seat/back tilting ratio of 1: 2 • The mechanism housing should be made up of HPDC Aluminium black powder coated. SEAT DEPTH ADJUSTMENT : Seat depth adjustment should be integrated in the seat through a sliding mechanism. Seat depth adjustment range should be of 6.0±0.5 cm. ADJUSTABLE BACK SUPPORT: Back Frame should be connected to the Up/Dn mechanism housed in Plastic T spine. It can be adjusted in the range of 7.42±0.5 cm for the comfortable back support to suit individual need. PNEUMATIC HT. ADJUSTMENT: The pneumatic ht adjustment has an adjustment stroke of 10.0±0.3 cm. PEDESTAL ASSEMBLY: The pedestal should be High Pressure Die cast polished Aluminium and fitted with 5 nos. twin wheel castors. The pedestal should be 65.0 ± 0.5cm. pitch-center dia.(75.0 ± 1.0cm. With castors.) TWIN WHEEL CASTORS: The twin wheel castors should be injection moulded in black PP having 6.0± 0.1cm wheel Diameter. The installation is including labour, loading, unloading with all necessary fixtures as directed by Engineer in charge etc. and excluding GST etc completed.

Providing and Fixing of Visitor chairs for President, Deputy President, C.O. & Deputy C.o. MARVEL VISITOR SEAT /BACK ASSEMBLY : The Cushioned seat should be made of Injection molded Plastic outer & inner. Plastic Inner should be upholstered with leatherette and moulded High Resilience (HR) Polyurethane foam of Density 45±2 kg/m3,and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression. The Cushioned back should be made of PU Foam with insitu molded MS E.R.W Round Tube of Size:- 1.9±0.03cm x 0.16 ±0.0128cm. It upholstered with Leatherette. Seat Size:- : 47.0 cm. (W) x 48.0 cm. (D) BACK Size:-: 47.7 cm. (W) x 60.1 cm. (D) Visitor TUBULAR FRAME: The tubular frame should be cantilever type and made of Ø2.54± 0.03 cm X 0.02 ± 0.016cm thick SS 202 tube. The back should be connected to frame through chrome plated high pressure die case connector piece. The installation is including labour, loading, unloading with all necessary fixtures as directed by Engineer in charge etc. and excluding GST etc completed.

Providing and Fixing of Executive Table (Size:-: MT 3000mm x 1050mm x 740mm; ERU 1500mm x 600mm x 610mm & Back Unit 2400x470x1226 ) for President & C.O. Model: GRANDEUR Make Godrej or equivalent. Main Worktop : Made of 43mm Thick (±1) combination of MDF and particle board with top veneer face coated with clear lacquer. All edges are edge banded with matching 1mm thick veneer lipping. Leather Pad: Made of 18mm Thick (±1) MDF with Leatherette wrapped around top surface. This leather pad is fixed to main top panel. Drawer Unit: Top panel and drawer unit modesty panel is made of 43mm Thick (±1) combination of MDF and particle board with top veneer face coated with clear lacquer. All thickness edges are edge banded with matching lipping. Remaining construction is of 18mm Pre-laminated twin board (PLT) of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Bottom panel of drawer is 9mm thick particle board with leatherette on top surface. Drawer unit is provided with soft closing channels for smooth opening and closing. Drawer unit is secured with side central lock. Modesty: Made of 18mm Thick Pre-laminated twin board (PLT) of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Modesty is fitted with aluminum trims. Understructure and ERU hinged door unit: Made of 18mm Thick Pre-laminated twin board (PLT) of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Door is fixed with soft closing hinges and handle is provided for ease of opening. ERU is secured with side central lock. The installation is including labour, loading, unloading with all necessary fixtures as directed by Engineer in charge etc. and excluding GST etc completed.

Providing and Fixing of Executive chair for President & C.O. EMERALD SEAT ASSEMBLY: The seat is made up of 12mm thick MR Grade plywood, layered with pocket spring coms, super soft foam of 32 kg/m3 density and edging foam of 28 kg/m3 dormity. A 200GSM soft touch fibre fill sheet is placed over foam sub-assembly and upholstered in natural leather or leatherette. BACK ASSEMBLY: The back assembly is made up of a combination of pinewood members, 12mm thick MR Grade plywood and 2mm thick cardboard, layered with slab stock foam of 28 kg/m3 density. A 200GSM soft touch fibre fill sheet is placed over foam sub-assembly and upholstered in natural leather or leatherette ARMPAD ASSEMBLY: The amped assembly is made up of 6mm thick MR Grade plywood fixed with MS powder-coated brackets, Inyered with foam of 60 kg/m3 density, A 200GSM soft touch fibre fill sheet is placed over foam sub-assembly and upholstered in natural leather or leatherette. CENTER TILT WITH MULTI POSITION LOCK MECHANISM: The mechanism is designed with the following features: 360 revolving type 3 position locking Till tension adjustment PNEUMATIC HEIGHT ADJUSTMENT: The Class 4 pneumatic height adjustment has stroke of 100.3 cm PEDESTAL ASSEMBLY: The pedestal is made of high-pressure die-cast polished aluminum with a buffed outside surface and black color-coated internal surface, it is fitted with 5 castors and has a pitch-center diameter of 67.510.5 cm (77.5 10 cm with castors). TWIN WHEEL CASTORS: The twin wheel castors are injection moulded in Black polyamide. WIDTH (W) - 69.0cm DEPTH (D) - 77.8cm HEIGHT (H) - 105.0-115.0 cm SEAT HEIGHT (SH) - 49.5-59.5 cm. The installation is including labour, loading, unloading with all necessary fixtures as directed by Engineer in charge etc. and excluding GST etc completed.

Providing and Fixing of Executive chair for President & C.O. LA SEDE VISITOR BACK ASSEMBLY : The Cushioned seat should be made of Injection molded Plastic outer & inner. Plastic Inner should be upholstered with pure leather and moulded High Resilience (HR) Polyurethane foam of Density 45±2 kg/m3,and hardness load 16 ± 2 kgf for 25% compression.The Cushioned back should be made of PU Foam with insitu molded MS E.R.W Round Tube of Size:- 1.9±0.03cm x 0.16 ±0.0128cm. It upholstered with Pure Leather. Seat Size:- : 47.6 cm. (W) x 49.2 cm. (D) BACK Size:- : 46.5 cm. (W) x 59.5 cm. (D) Visitor TUBULAR FRAME: The tubular frame should be cantilever type and made of Ø2.54± 0.03 cm X 0.02 ± 0.016cm thick SS 202 tube. The back should be connected to frame through chrome plated high pressure die case connector piece. The installation is including labour, loading, unloading with all necessary fixtures as directed by Engineer in charge etc. and excluding GST etc completed.

Providing & fixing of 2 seater sofa ( Size:-: 1460mm x 905mm x 855mm) PISA 2 SEATER SEAT FOAM : The seat is made up of PU foam in Density 28 ±2 kg/cu.mtr with an additional top layer of supersoft PU foam in Density 32 ± 2 kg/cu, upholstered with fabric or leatherette. BACK FOAM : The back is made up of PU foam in Density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density 32±2 kg/cu. mtr, upholstered with fabric or leatherette. UNDERSTRUCTRE : Understructure is made up of 1.2±0.1 cm. thick hot pressed plywood [moisture resistance & termite proof as per IS:303] & pinewood of cross sections devoid of major knots & surface defects. 6 nos. per seat & 3.8mm Dia zigzag spring assembly is mounted over understructure for cushioning purpose. LEG ASSEMBLY : It is a welded Assembly made in Stainless steel (grade SS 202) tube & plate with plastic endcap. The installation is including labour, loading, unloading with all necessary fixtures as directed by Engineer in charge etc. and excluding GST etc completed.

Providing & fixing of 3 seater sofa PISA 3 SEATER SEAT FOAM : The seat is made up of PU foam in Density 28 ±2 kg/cu.mtr with an additional top layer of supersoft PU foam in Density 32 ± 2 kg/cu, upholstered with fabric or leatherette. BACK FOAM : The back is made up of PU foam in Density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density 32±2 kg/cu. mtr, upholstered with fabric or leatherette. UNDERSTRUCTRE : Understructure is made up of 1.2±0.1 cm. thick hot pressed plywood [moisture resistance & termite proof as per IS:303] & pinewood of cross sections devoid of major knots & surface defects. 6 nos. per seat & 3.8mm Dia zigzag spring assembly is mounted over understructure for cushioning purpose. LEG ASSEMBLY : It is a welded Assembly made in Stainless steel (grade SS 202) tube & plate with plastic endcap. The installation is including labour, loading, unloading with all necessary fixtures as directed by Engineer in charge etc. and excluding GST etc completed.

Providing and Fixing of centre table - PISA CENTER TABLE Size:-: 1120x600x349mm GLASS: It is 10 ±0.3 mm thick black tinted Toughened glass UV glued with bushes made in SS 202 grade for focing with understructure. PISA SIDE & CENTER TABLE UNDERSTRUCTURE: It is a welded Assembly made in SS202 grade Dia. 12±0.04 as per IS:1762. The installation is including labour, loading, unloading with all necessary fixtures as directed by Engineer in charge etc. and excluding GST etc completed.

Providing and Fixing of corner table - PISA CORNER TABLE 600x600x349 GLASS: It is 10 ±0.3 mm thick black tinted Toughened glass UV glued with bushes made in SS 202 grade for focing with understructure. PISA SIDE & CENTER TABLE UNDERSTRUCTURE: It is a welded Assembly made in SS202 grade Dia. 12±0.04 as per IS:1762. The installation is including labour, loading, unloading with all necessary fixtures as directed by Engineer in charge etc. and excluding GST etc completed.

Providing and Fixing of Conference table - MINGLE CONFERENCE TABLE 14 SEATER( MEMBRANE FINISH ) Size:-: 4200X1500X740 Work top--Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Soft closing dual access flap provided for access to power supply and data cables. Understructure-The Under-structure consists of mixture of 25mm and 18mm Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Anodised aluminium alloy 63400 - WP profile is added at bottom edges for improving the aesthetics. The product has a knock-down construction. Wire Management-A wire raiser made of 0.8mm CRCA MS IS:513. It is epoxy polyester powder coated (DFT 40-60 microns) for flow of wires and cables. A Power box with 2 cutouts on either sides for standard 8 module Anchor Roma is provided. Beside each cutout, an additional cutout with plate is provided for mounting Audio Visual Cables(eg. HDMI,VGA-A,etc). The installation is including labour, loading, unloading with all necessary fixtures as directed by Engineer in charge etc. and excluding GST etc completed.

Providing and Fixing of Conference room storage - MINGLE STORAGE Size:-:L 1745 X 670 X 740 mm CARCASS-Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 0.8 mm thick PVC lipping. Pilot holes provided for fixing 12U AV equipment rack. 1 Nos 12U rack fits into one unit of 112 storage. 3 Nos 12U racks fit into one unit of 312 storage. GLASS-5mm thk toughened, grey tinted glass with crystal edge polish finish is used as shutter. They are fitted with self closing hinges with soft close dampner for smooth operation. BACK VENT PANEL-A panel made of 0.8mm CRCA MS IS:513, epoxy polyester powder coated (DFT 40-60 microns) is used for ventilation. The Size:- of the panel is different for both the modules. CASTORS-Castors (4nos.) are provided at the bottom to enable mobility of the unit as required for 112 unit Castors (5nos.) are provided at the bottom to enable mobility of the unit as required for 312 unit.Castors (5nos.) are provided at the bottom to enable mobility of the unit as required for 312 unit. The installation is including labour, loading, unloading with all necessary fixtures as directed by Engineer in charge etc. and excluding GST etc completed.

Providing and Fixing of Assembly room table - GRANDUER Size:-: 2400mm x 1050mm x 750mm MAIN WORKTOP : Made of 43mm Thick (±1) combination of MDF and particle board with top veneer face coated with clear lacquer. All edges are edge banded with matching 1mm thick veneer lipping. LEATHER PAD: Made of 18mm Thick (±1) MDF with Leatherette wrapped around top surface. This leather pad is fixed to main top panel. Drawer Unit: Top panel and drawer unit modesty panel is made of 43mm Thick (±1) combination of MDF and particle board with top veneer face coated with clear lacquer. All thickness edges are edge banded with matching lipping. Remaining construction is of 18mm Pre-laminated twin board (PLT) of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Bottom panel of drawer is 9mm thick particle board with leatherette on top surface. Drawer unit is provided with soft closing channels for smooth opening and closing. Drawer unit is secured with side central lock. MODESTY: Made of 18mm Thick Pre-laminated twin board (PLT) of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Modesty is fitted with aluminum trims. ERU WORKTOP : Made of 43mm Thick (±1) combination of MDF and particle board with top veneer face coated with clear lacquer. All thickness edges are edge banded with matching lipping. UNDERSTRUCTURE AND ERU HINGE DOOR UNIT: Made of 18mm Thick Pre-laminated twin board (PLT) of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Door is fixed with soft closing hinges and handle is provided for ease of opening. ERU is secured with side central lock. ACCESS FLAP WITH POWER BOX: Soft closing access flap with power box contains 3 Universal Sockets, 2 USB power points, 1 HDMI connection, 1 inbuilt misc. cable grommet and CAT 3 and CAT 6 connections. The installation is including labour, loading, unloading with all necessary fixtures as directed by Engineer in charge etc. and excluding GST etc completed.

Providing and Fixing of Assembly hall seating - NAMASTE Understructure: The understructure is made with steel ERW tube section(IS:228) of Size:- 80x40x2.5mm thick with powder coat finish .-Understructure consists of two welded leg assemblies connected by means of welded seat side tube assy and welded desk side tube assy on both sides.-Sturdy anchoring by anchor bolts on to base of 10mm thk plate for proper resting of structure**.-Plastic clad & shoe main clad made of glass filled 30% nylon-6 for covering anchor bolts. Side clads: Two side clads made of 35mm thk plt with 2mm thk pvc lipping. Desk side clad made of 18mm thk plt & seat side clad &connecting clad made of 25mm thk plt. Desklet: Desk has opening & closing mechanism by means of desk slider and slider sleeve made of 30% glass filled nylon-6.-Desk comprises of plt desk with aluminium section anodized finish on to sides and TPE rubber on to aluminium section outer side for cushioning effect for desk opening closing. Desk made of 18mm thk plt fixed with aluminum extrusion on to sides for desk opening closing. Seat: Seat has self closing mechanism which will operate by means of spring.-Seat understructure is a combination of welded fabricated structure made of Ø19X2mmthk ERW tube with powdercoat finsih which is covered by 0.8mm thk sheetmetal cover and uphlosted with moulded foam inside and leatherite cover.-Seat back comprises of ply with moulded foam upholosted inside & leatherite cover. The installation is including labour, loading, unloading with all necessary fixtures as directed by Engineer in charge etc. and excluding GST etc completed.

2 seater front unit 1378 X 528 X 890

2 seater middle unit 1378 X 520 X 890

2 seater rear unit 1378 X 750 X 890

3 seater front unit 2048 X 528 X 890

3 seater middle unit 2048 X 520 X 890

3 seater rear unit 2048 X 750 X 890

Providing and Fixing of Optimizer storage APO OPTIMIZER Size:-Drive - 2 bay ; 1 static; 6 twin & 1 last unit (915 W x 457D x 1980H) Construction: Rigid Knock Down construction made out of 0.8 thk. CRCA Steel conforming to IS: 513 Gr.D. Each body block(SS/SL/TM) building consists of 1 Main unit & then Add-on units (0, 1, 2, 3, 4 - depending on no. of bays 1, 2, 3, 4& 5). Each unit has 5 loading levels formed by 4 nos. adjustable shelves. Body units are bolted to undercarriage. Optimizer Height from ground is 2080 mm (1980 body + 65 under-structure + 35 channel system) Size:-: Description Depth (mm) Width (mm) Body Height (mm) Height with Under-structure & Rails (mm) Optimizer 15" 381 Dx 915W x1980H Optimizer 18" 457Dx 915W x1980H Finish: The bodies including shelves are given anti-rust surface treatment & are powder coated with epoxy polyesterpowder. It involves an 8 step treatment consisting of Hot water rinse, Knock off degreasing, degreasing, cold waterrinse I & cold water rinse II, iron phosphating, cold water rinse, passivation & dry off oven treatment. Final finishconsists of epoxy polyester powder coating of approved color & shade with a Dry Film Thickness of minimum45 (+\- 5) microns. The testing of paint is done for various physical & chemical properties as per IS: 101. The material is then oven baked with a controlled temperature of 180 deg.C to 200 deg.C. Shelf Construction: It is made of 0.8 thk CRCA steel conforming to IS: 513 Gr.D or DD. Shelves are having 10 bends & its max loadbearing capacity is 80 Kg uniformly distributed per shelf for P1 Type of Configuration. Shelves are mounted on support brackets & shelf level can be adjusted at approx. 25.4 pitches. There are 4adjustable shelves per body giving 5 loading levels, if no Cradle pair is provided. Centralized Locking: A Centralized locking arrangement is provided through Locking Stiffener mounted onto back of Single Last unitso that it gets locked on channels when all the units are brought together. The Recess handle lock is of Godrejmake & placed at suitable height. This arrangement occupies a space of 90.0 mm. When the last unit is Twin Movable, hinged doors are provided for the end bodies; so in this case locking stiffeneris mounted onto drive unit cover and with tile fascia option, it will be mounted in the recess of vertical trim. The installation is including labour, loading, unloading with all necessary fixtures as directed by Engineer in charge etc. and excluding GST etc completed.

Providing and Fixing of Optimizer storage APO OPTIMIZER Size:-Drive - 4 bay ; 1 static; 6 twin & 1 last unit (3660 W x 457D x 1980H) Construction: Rigid Knock Down construction made out of 0.8 thk. CRCA Steel conforming to IS: 513 Gr.D. Each body block(SS/SL/TM) building consists of 1 Main unit & then Add-on units (0, 1, 2, 3, 4 - depending on no. of bays 1, 2, 3, 4& 5). Each unit has 5 loading levels formed by 4 nos. adjustable shelves. Body units are bolted to undercarriage. Optimizer Height from ground is 2080 mm (1980 body + 65 under-structure + 35 channel system) Size:-: Description Depth (mm) Width (mm) Body Height (mm) Height with Under-structure & Rails (mm) Optimizer 15" 381 Dx 915W x1980H Optimizer 18" 457Dx 915W x1980H Finish: The bodies including shelves are given anti-rust surface treatment & are powder coated with epoxy polyesterpowder. It involves an 8 step treatment consisting of Hot water rinse, Knock off degreasing, degreasing, cold waterrinse I & cold water rinse II, iron phosphating, cold water rinse, passivation & dry off oven treatment. Final finishconsists of epoxy polyester powder coating of approved color & shade with a Dry Film Thickness of minimum45 (+\- 5) microns. The testing of paint is done for various physical & chemical properties as per IS: 101. The material is then oven baked with a controlled temperature of 180 deg.C to 200 deg.C. Shelf Construction: It is made of 0.8 thk CRCA steel conforming to IS: 513 Gr.D or DD. Shelves are having 10 bends & its max loadbearing capacity is 80 Kg uniformly distributed per shelf for P1 Type of Configuration. Shelves are mounted on support brackets & shelf level can be adjusted at approx. 25.4 pitches. There are 4adjustable shelves per body giving 5 loading levels, if no Cradle pair is provided. Centralized Locking: A Centralized locking arrangement is provided through Locking Stiffener mounted onto back of Single Last unitso that it gets locked on channels when all the units are brought together. The Recess handle lock is of Godrejmake & placed at suitable height. This arrangement occupies a space of 90.0 mm. When the last unit is Twin Movable, hinged doors are provided for the end bodies; so in this case locking stiffeneris mounted onto drive unit cover and with tile fascia option, it will be mounted in the recess of vertical trim. The installation is including labour, loading, unloading with all necessary fixtures as directed by Engineer in charge etc. and excluding GST etc completed.

Design,Providing, installation and fixing 12 mm thick Toughened Glass (Glass Make:- Saint Gobain/ Asahi glass India) DOORS upto 2.15 M with all as per required arrangement & proper machine edge finish in angle & fixed in the flooring side with Aluminium profile 'U' channel . Glass panels to be formed as per approved modules 12 mm thick clear toughened glass edge polished and accurate designed holes to be installed by means of steel fittings of an approved make Saint Gobain / Asahi or equivalent. Including Floor spring (make:- Dorma or equivalent), Lock approved make, Door Handle both side(SS make), all works including labour, wastages, cost of scaffolding, finishing withfrosted design film etc. complete.

WALLPAPER- Providing & fixing highlighter / Coordinate exclusive wallpaper on wall & ceiling, etc. complete. Including all other tax, excluding GST.

Providing & fixing of extra table tops at site made in 18mm commercial ply and finished in laminate as per the available Size:- and matching the adjoining colour scheme.Including all complete, GST extra.

Providing & fixing of extra storage of 450mm depth at site made in 18mm commercial ply and finished in laminate as per the available Size:- and matching the adjoining colour scheme. Including all complete, GST extra.