Directorate Of Municipal Administration Tender

Item No.4 Excavation for foundation in hard murum ncluding removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessaryback filling, ramming, watering including shoring and strutting etc. complete. R.A.4

Item No.5 Providing laterite/dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete.R.A.5

Item No.6 Providing and laying Cast in situ/Ready Mix cement concrete in M-10of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to beprovided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) R.A.6

Item No.7 Providing and fixing factory made Hydraulically pressed Mechanically vibrated and compacted precast inter locking cement concrete paving blocks 80MM thick in M-40 grade of approved size and shape for City streets, small /medium market roads, low volume roads, utility cuts on arterial roads etc. as specified and as per IS 15658: 2006 including cost of all materials, manufacturing, curing, transportation of blocks to work site including loading, unloading and stacking as directed, laying paving blocks in position over prepared bed of VSI crushed sand of 50 mm thickness including necessary excavation in all stratas, spreading blindge of fine sand over the prepared bed, compacting blocks by plate vibrator etc. completeR.A.7

Item No.8 Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/ granite/quartzite/gneiss metal for bed blocks, foundation blocks and such other items including balling out water, Steel centering, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc, complete. With fine aggregate (Crushed sand VSI Grade) R.A.8

Item No.9 Providing Laterite stone massonary in cement mortar 1:6 in foundation and plinth incliding racking out joints when plastering is to be done /striking out joints where no plastering is to be done watering and scaffolding. R.A.9

Item No. 10 Providing Laterite stone massonary in cement mortar 1:6 in super structure incliding racking out joints when plastering is to be done /striking out joints where no plastering is to be done watering and scaffolding. R.A.10

Item No. 11 Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C.coping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including steel centering, formwork, cover blocks, laying/pumping, compacting curing, finishing and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) R.A.11

Item No.12 Providing and fixing in position TMT FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending,hooking the bars, binding with wires or tack welding and supporting Jas required complete. R.A.12

Item No. 13 Providing and fixing H.D.P container one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow pipe inclusive of all tanks capacity between 200 to 1000 liters R.A.13

Item No.14 Providing, laying and fixing P.V.C. pipe of 110 mm. dia. with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete R.A.14

Item No.15 Providing and fixing 15 mm dia. screw down bib/stop tap of brass including necessary socket union nut complete R.A.15

Item No.16 Providing and fixing mild steel grill gate as per the detailed drawing including hinges, locking arrangements and painting in three coats of oil paint of approved colour and shade etc. complete. (weight 18 Kilogram. to 20 Kilogram. Per Sq.m.) Spec. Number: As directed by Engineer-in-charge. R.A.16

Item No.17 Providing structural steel work in trusses, other similar trussed purlins and members with all bracing gusset plates etc.as per detailed designs and drawings or as directed including cutting. fabricating hoisting, erecting fixing in position, Making riveted /bolted/ welded connection and one coat of anti corrosive paint and over it 2coats of oil painting approved quality and shade etc R.A.17

Item No.18 Providing and fixing colour coated Zincalume (R) AZ150 (min 150 gms/sq.mt total on each side) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45mm Base Metal Thickness (BMT) (0.5mmTCT), Hi-strength steel with min.550 MPa yield strength, metallic hot dip coated with Aluminium- Zincalloy (55% aluminium 43.4% zinc 1.6% silicon) with COLORBOND (R) steel quality super durable polyester paint coat (with inorganic pigment) The paint shall have a total coating thickness of nominal 35um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom.950-1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square fluting in the five pan at nominal 180-250 mm center-to-center. The end rib shall be designed for anti-capillary groove, and return leg. The feed material should have coil manufacturers product details marked a

Item No. 19 Providing internal cement plaster 12 mm thick in Single coats in cement mortar 1:4 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc. complete R.A.19

Item No.20 Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. R.A.20

Item no 21: Providing and laying machine cut machine Polished Kota stone flooring 25mm to 30mm thick and required width in plain/ diamond pattern on bed of 1:6 C. M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete

Item No.22 Providing and fixing board displaying information, such as 'Name ofwork, Tender cost, Name of Contractor, Work completion and liabilityperiod etc', having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat ofZinc chromate stoving primer and two coats of enamel paint on frontside and grey stove enamel on back side and border / messages /symbols etc. with approved colour shade paint complete, onM.S.angle of size 35 x 35 x 3 mm frame 1 with properly cross bracedM.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m longpainted with alternate black and white bands of 25 cm width includingall fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec No. As directed by Engineer in Charge R.A.22

gst

insurance

royalty charges

testing charges