Directorate Of Municipal Administration Tender

Providing and laying in situ following grades of Cement Concrete of trap/ granite / quartzite / gneiss metal for foundation and bedding including dewatering, form work, compaction, curing, finishing etc. complete. MJP SOR 2019-20 (Bd-E-1 /287), Pg No - 40

Providing and laying M-25 in situ Cement concrete of trap/granite/quartzite/ gneiss metal for RCC work in foundation like raft, grillage, strip foundation and footing of RCC columns and steel stanchions including normal dewatering, 'plywood form work, bully/steel propups, compaction, finishing and curing, etc, complete. (By weigh batching and mix esign for M-250 and M-300 only. Use of L & T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) (excluding M.S. or Tor reinforcement) For RCC M-25 at foundation MJP SOR 2019-20, Section - G- Plain and Reinforced Cement Concrete, Item No 2c, Page No - 40

Providing and casting M-25 in situ Cement Concrete of trap/granite/quartzite/ gneiss metal of approved quality for RCC work as per detailed drawings and designs or as directed by ngineer-in-charge For RCC M-250 grade Slabs / Landings / Vertical Walls / Waist Slabs / Steps for Staircase including normal dewatering, centering, 'plywood formwork, ully/steel prop-ups, compaction, finishing the formed surfaces with CM 1:3 of sufficient minimum thickness if special finish is to be provided and curing, etc. complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C. C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted) (excluding M.S, or Tor einforcement) For RCC M-25 Wall/ Slab MJP SOR 2019-20, Section - G- Plain and Reinforced Cement Concrete, Item No 5b, Page No - 41

Providing and casting in situ Cement Concrete of trap/granite/quartzite/ gneiss metal of approved quality for RCC work as per detailed drawings and designs or as directed by Engineer-in-charge including normal dewatering, centering, 'plywood formwork, bully/steel prop-ups, compaction, finishing the formed surfaces with CM 1:3 of sufficient minimum thickness if special finish is to be provided and curing, etc. complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C. C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted) (excluding M.S, or Tor reinforcement) For RCC M-25 Beam MJP SOR 2019-20, Section - G- Plain and Reinforced Cement Concrete, Item No 4b, Page No - 41

Providing Second Class Burnt Brick masonry with conventional / IS. type bricks in cement mortar 1:6 including scaffolding, racking out joints pointing in C.M 1:3 and watering etc. in pillars of curved shapes, as shown on the drawing or as directed etc. complete. 27.01 BDG 1 E-DSR, PWD, Bd.G.9 (b) Page No. 317, Item No 27.09, Brick masonary

Providing and fixing in position steel bar reinforcement of various diameters for RCC piles, caps, footings, foundations,slabs, beams, columns, canopies, taircases. newels, chajjas,lintels, pardies, copings, fins, arches, etc. as per detailed designs, drawings and schedules; including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required, etc. complete.(including cost of binding wire) MJP SOR 2019-20, Section - G- Plain and Reinforced Cement Concrete, Item No 8c, Page No - 42

Providing, lowering, laying and placing in position, shrouding material for porous pipe gallery / slotted pipe gallery/ trench gallery with all leads and lifts involved including transportation of materials to site of works, screening and washing of materials and placing in position with given section, etc. complete as directed by Engineer-incharge. MJP SOR 2019-20, Section-J-WELL SINKING RIVER INFILTRATION WORKS, Item no. 10 , page no - 216 40 mm Pabbles

12 to 20 mm Pabbles

Fine Sand

Providing internal cement plaster 12mm thick in single coat in cement mortar 1:3 without neeru finish to concrete or brick surfaces, in all position including scaffolding and curing etc. complete. PWD, e-DSR(Bd.L.2 Page No. 368

Providing and laying cement concrete manhole cover (300 mm X 300 mm) Lumpsum

Preparation of good soil and manure and throghly mixed, leveleing, watering and planting well developed canna bed of 1.5' height and maintaining till well established etc complete. Horticulture DSR, PWD, 2016-17, Plants for canna. 10% escalation for two years

2.0 HP capacity of pump Centrifugal Monoblock Pump set (Single Stage) - Providing, erecting and giving test of centrifugal Monoblock pump set conforming to IS 9079 operating at 2900 RPM with CI impeller, priming funnel, cock, suitable flanges at suction and delivery side. Pump shall have common shaft for pump and motor. Motor shall be suitable for working on 415 V ± 10%, 3 Ph, 50 Hz A.C. Supply. Motor shall be TEFC type. Pump set shall be suitable for working at various discharge and head requirements. Pump shall be erected on Provided C.C. foundation block with suitable foundation bolts grouted in C.C. foundation block MJP ELECTRICAL & MECHANICAL CSR 2019-20, PM 2-1-1, page no -4

Supplying and erecting DOL starter to operate squirrel cage induction motor working on 380- 440 Volt, 3 phase, 50 Hz with no volt coil and over load element with necessary material and connected to supply, etc complete. Starter with original sheet steel encloser. upto 7.5 HP Capacity MJP ELECTRICAL & MECHANICAL CSR 2019-20, LG 1-1, page no -48

3 core PVC insulated, PVC sheathed copper conductor flat submersible cable. Supplying and erecting, Flat flexible submersible cable with, Copper Conductor, PVC insulated, and PVC sheathed. MJP ELECTRICAL & MECHANICAL CSR 2019-20, CB 1-5, page no -56

Providing and supplying in standard lengths ISI mark rigid unplasticised PVC pipes suitable for potable water with solvent cement joints including cost of couplers, as per IS specification no. 4985 / 1988 excluding GST levied by GOI and GOM in all respect, including transportation, freight charges, inspection charges, loading, unloading, conveyance to the departmental stores and stacking the same in closed shed duly protected from sun rays and rains including cost of jointing material i.e. solvent cement, etc. complete (selffit type to be jointed with cement solvent). For 90 mm OD uPVC pipe MJP, DSR, 2019-20, SECTION - I : C.I./D.I. PIPES, Item 1 of II. PVC pipes, Page no 65

Lowering, laying and jointing with P.V.C. pipes and specials of following class and diameter including cost of conveyance from stores to site of works including cost of all labour, material, except cement solvent, rubber ring, as per IS code, etc. complete (with cement solvent joint / ring fit joint). For 90 mm OD uPVC pipe MJP, DSR, 2019-20, SECTION - I : C.I./D.I. PIPES, Item 4 of II. PVC pipes, Page no 69

Water Supply and Sanitary Fitting 42.54 BDV Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of low density polythyler and built corrugation including of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow of all tanks capacity above 1000 to 20,000 litres As directed by engineer-incharge. Litre 11.00 1.00 E-DSR, PWD, Code- 42.54 BDV, Pg. no.- N.A.(E-DSR)

Providing, erecting, commissioning & giving test & trial for a period of one month including one year free maintenance after commissioning of Electro chlorinator capable of generating chlorine form common salt by electrolysis using electrodes in form of sodium hypo chlorite solution containing 6-8 gms/lit of available chlorine in batch or continuous process and capable of providing 8 hrs storage of hypochlorite in case of power failure. The electro chlorinator shall comprise of following. Electrolytic cell consisting dimensionally stable electrodes made from Gr I Titanium sheet with multi metal Oxide coating. Electolyzer tank made from PVC -FRP or Acrylic. Power pack consisting of ansformer rectifier for generating suitable DC current from AC supply along with the control switch for dosing pumps, etc through MCB's contacts, relays and wiring. Control panel for the electro chlorinator consisting of DC voltage and current display income phase status unit on-off switches fuses etc. Dosing tank of suitable capacity made from PVC/FRP. Dosing pumps of special quality (1W+1S) suitable to handle hypo chlorite solution. Entire chlorine solution pipeline shall be of PVC Chlorine test kit suitable to measure residual chlorine up to 5ppm. (25 gms / hr) MJP MECH/ ELECT DSR 2019-20 , (EC 17-1) Page no 75