Directorate Of Municipal Administration Tender

Item No.04 :- Spreading over size 40mm/50mm/60mm/80mm trap metal incluiding sectioning etc complete.

Item No.05 :-Compacting the 60 mm over size metal (200 mm loose) layer 2.00 m to 7.00 m width with static roller incluiding necessary labour,material and artificial watering etc

Item No.06 :- Compacting the 40 mm over size metal (100 mm loose) layer 2.00 m to 7.00 m width with static roller incluiding necessary labour,material and artificial watering etc

Item No.07:- Supplying hard murum/ kankar at the road site, including conveying and stacking complete.

Item No.8 :- Spreading hard murum for side width etc. complete

Item No.9 :- Compacting the hard murum side widths including laying in layers on each side with power roller including artificial watering etc. complete.

Item No.10 :- Providing and constructing 75 mm. thick Modified Penetraction Macadam (MPM) road surface including all materials,preparing the existing road surface, spreading 40 mm. stonelayers metal 30% crusher broken metal + 70% Hand brokenmetal (By breaking Rubble obtained by blasting) , heating&spraying the bitumen of VG-30 grade @ 2 kg / sqm , spreading12mm.size chips compacting with three wheel static rollerhaving weight 8 to 10 MT. to achive the desired degree ofcompaction as per Technical Specification Clause 506 etc.complete, including picking of existing WBM surface(WITH OUT TACK COAT)

Item No.11 :- Providing 20mm thick premix bituminous carpet including supplying all materials, preparing and clearing the base, heating bitumen applying tack coat at specified rate,mixing hot bitumen and chips lalying the carpet layer and compacting etc.complete.by bulk Asphalt. (excluding Tackcoat),(cold mix with prior aooroval)

Item No.12:-Providing bituminous Type A liquid seal coat on bituminous surface including supplying all materials and bitumen of VG-30 grade preparing existing road surface, heating and applying bitumen @ 0.98 KgSqm. by mechanical means, spreading chips and rolling, by static roller having weight 8 to 10 MT. etc. complete.

Item No.13 :-Providing and fixing board displaying information,such as 'Name of work,Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge

Item No.14 :- Add Royalty Charges for trap rubble/trap metal etc.....

A) for trap metal

B) for Earthwork

C) for Murum

Penetration, Softening Point, Flash & Fire Point, Specific

Viscosity.

Ducility

Extraction test for Carpet

Sieve Analysis, (For WBM trap metal)

Water Absorption, Specific Gravity,lmpact Value,Crushing Value.(For WBM trap metal)

Sieve Analysis, (For MPM crushed metal)

Water Absorption, Specific Gravity,lmpact Value,Crushing Value.(For MPM trap metal)