Department Of Agriculture Tender

Providing dry trap/ granite/ quartzite/ gneiss rubble stone soiling 15 cm to 20 cm thick including hand packing and compacting complete. Spec .No. : Bd.A.12 Page No. 264 ;

Filling in plinth and floors with approved excavated material in 15cm. to 20cm. layers including watering and compacting etc. complete.

Filling in plinth and floors with contractors material/ brought from outside and approved by Engineer in charge in layers of 15 cm to 20 cm including watering and compaction etc. complete.

Providing and filling in the foundation with sand of approved quality including watering, compacting etc. complete. (To be executed with prior approval of Superintending Engineer)

1.      Providing and laying Cast in situ/Ready Mix cement concreteinM-10 of trap/granite/quartzite/gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, rougheningthemifspecialfinishistobeprovided,finishingifrequiredandcuringcomplete,withfullyautomaticmicroprocessorbasedPLCwithSCADAenable dreversible Drum Typemixer/concreteBatchmixplant (Panmixer)etc.complete.Withfineaggregate(Crushed sand VSI Grade)

ProvidingandlayinginsitucementconcreteofM-25 gradeoftrap/granite/quartzite/gneissmetalforR.C.C. worklike raft, grillages, strips, foundations and footingsofR.C.C.columnsandsteelstanchionsincludingbailing- outwatermanually,includingcenteringformworkof plywood / steel, compaction, covering newly laid concrete bygunnybag,plasticortarpaulin,finishingtheformed surfacewithcementmorter1:3ofsufficientminimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc complete. (Excludingreinforcement) The cement mortar 1:3 plasterisconsideredforrenderingunevenandhoneycombed surface only.(Wooden planks/shuttering will not be allowed) Spec.No.:Bd.F.2 Page No. 298 /IS 456 (1978)

ProvidingandlayingCastinsitu/ReadyMixcementconcreteM-25oftrap/granite/quartzite/gneissmetalfor R.C.C. columns as per detailed designs and drawing or as directedincludingsteelcentering,formwork,coverblocks, laying/pumping, compaction finishingtheformed surfaces withcementmortar1:3ofsufficientminimumthicknessto giveasmoothandevensurfaceorrougheningifspecial finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).withfullyautomaticmicroprocessorbasedPLCwith SCADA enabledreversibleDrumTypemixer/concrete Batchmixplant(Panmixer)etc.complete.Withfine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)

Providing and laying Cast in situ/Ready Mix cement concreteM-25oftrap/granite/quartzite/gneissmetalfor R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batchmixplant(Panmixer)etc.complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)

ProvidingandlayingCastinsitu/ReadyMixcementconcreteinM-20oftrap/ granite/gneiss/ quartzitemetal for R.C.C. fins of required thickness in positionas shown onthedrawingsorasdirectedbyEngineer-in-charge including steel centering, plywood / steel form work, steel props, laying/ pumping, compaction ,finishing uneven and honeycombedsurfacewithC.M.1:3ofsufficientminimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided andcuringetc.complete.(Excludingreinforcement, includingcoverblock)Newlylaidconcreteshallbecoveredbygunnybag,plastic,tarpaulinetc.withfully automaticmicroprocessorbasedPLCwithSCADAenable dreversibleDrumTypemixer/concreteBatchmixplant (Panmixer)etc.complete.Withfineaggregate(Crushed sand VSI Grade)

ProvidingandcastinginsitucementconcreteofM-25 grade of trap granite / quartzite / gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings or as directed including fixing plastic cover block of requird size at 27 Nos in per 10 Sqm to reinforcement to give a clear cover of 15mmin RCC slabs, fixing fan hook box of 100mmdiameter PVC or MS material with required depth withholesornotchesasrequired,bottomwith12mm diameter M.S. bar bend to shape with hooked ends for fan hookandpaintingtoexposedsurface,centering,formwork ofsteel,compaction,coveringnewlylaidconcreteby gunnybag,plasticortarpaulin,finishingtheformedsurfacewithcementmortar1:3ofsufficientminimum thickness to giveasmooth and even surfaceor roughening if specialfinish isto beprovided and curingetc.complete. (Excludingreinforcement.Thecementmortar1:3plasteris consideredforrenderingunevenandhoneycombedsurface only.Woodenplanks/shutteringwillnotbeallowed). Bd.F.8 Page No. 302 / IS 456:2000

Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, archesetc.asperdetaileddesigns,drawingsandschedules. including cutting, bending, hooking the bars, binding with wiresortackweldingandsupportingasrequiredcomplete

Providing dry rubble stone pitching 23cm (about 9) thick including all material, quarry spalls, labour etc.complete.

Providing Brick masonry in cement mortal 1.6 using second Class Burnt Bricks in foundation and plinth of inner walls/ in plinth of external walls including bailing out water manually, striking joints on un exposed faces ,watering and scaffolding complete Bd. G. 1, Page No.313,

ProvidingsecondclassBurntBrickmasonrywithconventional/I.S.typebricksincementmortar1:6in superstructure includingstriking joints,raking outjoints, watering and scaffolding etc. Complete

Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofingcompoundat1kgpercementbagcuringthe same for not less than 2 days and keeping the surface of thebasecoatroughtoreceivethesandfacedtreatment6to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete.

Providing and fixing steel ventilator fully glazed partly fixed as per detailed drawing with hot dip zinc coating including fabricating glazing with plain/ obscured glass pans 5mm thick and approved type quality and iron oxidized fixtures and fastening with guards quare bars 12mm 10cmc /cand oil painting 2coats etc. complete.

Providing and applying white-wash in one coat on old/ new plastered or masonry surfaces and asbestos cement sheets including scaffolding and preparing the surface by brushing and brooming down etc. complete.

Providingandapplyingplasticemulsionpaintofapproved quality, colour and shade to old and new surfaces in two coats includingscaffolding, preparingthe surface. (excluding the primer coat) etc. complete.

Providing and fixing rolling shutter fabricated from steell at hsofminimum thickness 0.9mm with lock plate of 3.15 mmthicknessreinforcedwith35x35x5mmanglesection fittedwithsliding boltsandhandlesforbothsides,deep M.S.channel section of depth and thickness not less than 65mmand3.15mmrespectivelywithholdfastarrangements,M.S.Bracketplate300x300x3.15mmminimum sizeandshapewithsquarebar,suspensionshaftof minimum32mmdiameter,hoodcoverofM.S.sheetnot less than 0.9mm thickness and of any size attopand safety device sincluding mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade castir on or mild steel and one coat of redlead primer etc. complete.(I.S.62481979) (Without mechanical gear)

Providing and laying in situ cement concrete M20 with tremix treatment for 100 mm thickness for flooring with groove cutting of 4mm wide and 20mm deep with necessary refilling with bitumen etc. complete.

Providing structural steel work in trusses, other similar trussed purlins and memberswithallbracing,gussetplates etc. as per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting fixing in position, Making riveted/ bolted/ welded connection and one coat of anti corrosive paint and over it 2 coats of oil painting approved quality and shade etc. complete.

Providing and fixing colour coated Zincalume (R) AZ 150 (min150 gms /sq.mt. total on each side) profiled sheets for roofing. The feed materialis manufactured out of nominal 0.45mm Base Metal Thickness(BMT) (0.5mm TCT), Hi- strength steel with min. 550 MP a yield strength, metallic hotdipcoatedwithAluminium-Zincalloy(55%aluminium 43.4% zinc 1.6% silicon) with COLOR BOND (R) steel qualitysuper durable polyester paint coat (with in organicpigment).Thepaintshallhaveatotalcoating thickness of nominal 35um, comprising of nominal 25 um exterior coatontopsurfaceandnominal 10umreverse coat onbacksurface.Profilesheet shallhave nom.950-1050 mmeffectivecoverwidthandnominal25-30mmdeepribs withsubtlesquareflutinginthefivepanatnominal180- 250 mm center-to-center. The endrib shall be designed for anti-capillarygroove.andreturnleg.Thefeedmaterial shouldhavecoilmanufacturersproductdetailsmarkeda regularinterval. Including fastenerswithmin.fastened withmin.25umZinc-Tinalloycoated,Hexhead,self- drilling screw etc. complete. (weight of profile 4.52Kilogram / SquareMetre ).

Turbo ventilator 24" MATERIAL RATES FOR SSR For Year 2021-22,Page no. 374, Building (Bd-R : Rofing and ceiling)

Providing and fixing UPVC Roof made up of 3 layers roofing material of thickness 2mm having width of 1130mm and of required Length having Tensile strength not less than 330Kilo gram/ cm2, including fastening with self drilling screw having washers made of stainless steel etc. complete.

Royalty Charges for sand

Royalty Charges for Rubble and HM

Material Testing Charges

TESTING CHARGES

Comp. Strength-Cube

Crush Metal- Basic Test

Gradation

Combined Flakiness & Elongation of

single metal

Cement- Fineness, consistency. Setting time, Compressive strength, Specific Gravity

Sand-Fineness Modulus, Silt

Content

Water Absorption (Set of 5 Bricks),Compressive Strength( Set of 5 Bricks), Efflorescence

(Setof5 Bricks).

GSB Mix Design./Cement Treated Sub Base(CTSB)

Concrete Mix Design(With all Tests on basic materials)

Management Strategies and Implementation Plan (MSIP) to manage Environmental, Social , Health and Safety (ESHS) Risk and ESHS Code of Conduct