Department Of Agriculture Tender

Excavation for foundation in Hard murum and boulders including removing the excavated material upto a distance of 50 meters, beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting, dewatering etc. complete. (Lift from 1.5 m to 3.0 m) by Mechanical Means

Excavation for foundation in Hard-rock by blasting including trimming and leveling the bed by chiseling where necessary and removing the excavated material and stacking it in measurable heaps within a distance of 50 meters from the building area including dewatering and back filling with available earth/ murum watering, ramming etc. complete, (Lift from 1.5m To 3.0 m) by Mechanical Means.

Providing and laying Cast in situ/ Ready Mix cement concrete in Mix- 10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with Ordinary Concrete mixer, etc. complete. With fine aggregate (Crushed sand V.S.I. Grade).

Providing and laying in situ/ ready mix M-25 controlled reinforced cement concrete of trap metal for raft slab including "V" haunches, formwork, scaffolding, compaction by vibrating, finishing curing etc. complete, RCC Grade with reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. with fine aggregates of required specifications (VSI sand finely washed etc.)

Providing and laying in situ/ ready mix M-25 plain cement concrete of trap/ granite/ quartzite/ gneiss metal for cast in citu piers, abutment, returns, wings etc. including provision of "V" shaped false joints to form suitable panels on the faces to approve design with compacting by vibrating and curing complete, including plywood/ steel form work centering, excluding dewatering by means of pump and including bailing out water and curing, finishing in CM 1:3 etc. complete, as directed by engineer in charge, for height upto 5 M, with fully automatic micro processor based PLC with SCADA enabled Batch Mix Plant, with fine aggregates of required specifications (VSI sand finely washed etc.) The basic rate shall be increased for height above 5.00 m in following manner (A) Depth to 10 m percent extra for rate for, (B) Depth upto 15 m Add 40 percent extra for rate, (C) Depth upto 20 m Add 60 percent extra for rate, (D) Depth upto 20 m Add 100 percent extra

Providing and laying in situ/ Ready Mix cement concrete M-25 of trap/ granite/quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, formwork, laying/ pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided, (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled Reversible Drum Type mixer/ concrete Batch Mix plant (Pan mixer) etc. complete, with fine

Providing and laying Cast in situ/ Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. Pardi of required thickness including centering, formwork, cover blocks, laying/ pumping, compacting, curing, finishing and roughening them if special finish is to be provided and curing complete, (Excluding reinforcement and structural steel) with fully automatic micro processor based PLC with SCADA enabled Reversible Drum Type mixer/ concrete Batch Mix plant (Pan mixer) etc. complete, with fine aggregate (Crushed sand V.S.I. Grade).

Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap /quartzite/granite /gneiss metal for R.C.C. Waist slab, and steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/ steel formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding enforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing and fixing in position TMT FE -500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules, including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete

Providing and laying Cast in situ/ Ready Mix cement concrete M-25 of trap/ granite/quartzite/ gneiss metal for R.C.C. Beams and Lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/ pumping, compaction and roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel), with fully automatic micro processor based PLC with SCADA enabled Reversible Drum Type mixer/ concrete Batch Mix plant (Pan mixer) etc. complete with fine aggregate (Crushed sand V.S.I. Grade).

Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm. thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm. thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc. complete.

Providing fine cement finish 1.5 mm. thick over green plaster surface including scaffolding curing etc. complete

Filling in plinth and floors with approved excavated materials in 15 cm to 20 cm layers including watering & compaction complete.

Providing dry trap rubble stone soling 15cm to 20cm thick including hand packing and compacting complete.

Providing and applying two coats of exterior acraylic emulsion paint conforming to corresponding I.S. of approved manufacture and of approved colour to the plastered surfaces including cleaning, preparing the plaster surface, applying primer coat, scaffolding if necessary and watering the surface for two days etc. complete.

Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Royalty Charges

Royalty Charges Rubble and Hard Murum

Material Test Charges

M-25 for RCC Raft with VSI Sand. CONCRETE Compressive Strength OF Cement Concrete Cube (Set of 3 cubes) test.

Concrete Mix Design (With all Tests on basic materials).

BASIC TEST OF AGGREGATE. Flakiness Index/ Elongation Index test.

FINE AGGREGATES. Fineness Modulus (Sieve Analysis),Silt& Clay Content test.

Batch Mix M25 for Piers, Abutments, Returns with V.S.I. Sand.CONCRETE Compressive Strength OF Cement Concrete Cube (Set of 3 cubes) test. CONCRETE Compressive Strength OF Cement Concrete Cube (Set of 3 cubes) test

M-25 for R.C.C. Columns with Crushed Sand V.S.I. Grade CONCRETE Compressive Strength OF Cement Concrete Cube (Set of 3 cubes) tes

M-25 for R.C.C. Pardi 75 mm thick, with Crushed Sand V.S.I. GradeCONCRETE Compressive Strength OF Cement Concrete Cube (Set of 3 cubes) test.

TMT FE-500 bar reinforcement for R.C.C. 19.10 Metric Tonne Steel 1.00000 19.10 72 STEEL BAR TESTING Upto 16 mm (Set of 3 Bars) 1 Test per 5 M.T. 4 1340.00 5360.00 5-Bd-F :

STEEL BAR TESTING Above 16 mm (Set of 3 Bars) (Tensile strength, %, Elongation, Yield

Filling in plinth and floors with approved excavated materials. SOIL / MURUM Compaction Test (Proctor Density).

SOIL / MURUM Liquid limit & plastic Limit test.

Supply,Installation,Testingand And Commissioning Of Silo Machinery

Supply,Installation,Testingand And Commissioning Of Chaine Conveyor 38 Mtrs,Elevator Tower With Platform,Bucket Elevator, Online Weighing Load Cells (Detailed Specification Mentioned In Tender Document)

Installation And Commissioning Charges