Cooperation Marketing And Textiles Department Tender
Search from over 12139+ business opportunities that have been announced from the biggest Mahatenders, e tender Maharashtra, Maharashtra government tenders, and the Online Tender Notices posted on Maharashtra e tenders till date. Find opportunities that have come in from the multiple corporations, Maharashtra government departments, State PSUs, and Private companies from the state.
Cooperation Marketing And Textiles Department Tender
Civil And Construction
Civil Works Others
Building Construction
Eprocure
Opening Date11 Sep 2024
Closing Date28 Nov 2024
Tender Amount₹ 11,09,13,420
Costs
EMD
₹ 11,09,134Document Cost
₹ 3,540Tender Fee
₹ 500
Summary
Cw8 - Erection Of Chili Processing Facility Centre At Bharadi, Taluka Sillod
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_CMTAD_1083744_1Tender No
MSAMB/ENGG/ADB/MAGNET/CW8Tender Authority
Cooperation Marketing And Textiles Department ViewPurchaser Address
-Website
http://https://mahatextile.maharashtra.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Spec. No. : Means Bd.A.1 Page No.259 ( I. No. 21.02 & P. No. 153 )
1382.32
-
-
... More
Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.50 m) By Mechanical Means Spec.No. : Means Bd.A.2 Page No.259 (I. No. 21.06 & P. No. 153)
980.72
-
-
... More
Excavation for foundation in hard murum and boulders including removing the excavated material up to a distance 50 metres, beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5m.) By Mechanical Means Spec.No. : Bd.A.3, Page No. 259. (I. No. 21.10 & P. No. 154)
236.24
-
-
... More
Excavation for foundation in Soft rock and old cement or lime masonry foundations including removing the excavated material upto a distance of 50 metres beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth /murum, ramming, watering including shoring and strutting etc. complete (lift upto 1.5m) By Mechanical Means Spec.No. : Bd.A.4, Page No. 259. (I. No. 21.14 & P. No. 154)
101.55
-
-
... More
Excavation for foundation in Hard rock by chiselling, wedging, line drilling, etc. including trimming and levelling the bed, removing the excavated material up to a distance of 50 metres beyond the building area stacking as directed, dewatering and back filling with available earth/murum watering, ramming etc. complete. (Lift up to 1.5m). By Mechanical Means Spec.No. : Bd.A.6, Page No. 260. (I. No. 21.20 & P. No. 115)
81.32
-
-
... More
Conveying materials obtained from road cutting including all lifts, laying in layers of 20cm to 30cm. breaking clods, dressing to the required lines, curves, grades and section, watering and compacting to not less than 97% of standard Proctor density for a lead of over 50m. to 300m. inclusive from the site of excavation to the site of deposition as directed. Spec. No. MORTH 305 (I. No. 2.25 & P. No. 24 )
2007.91
-
-
... More
Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating the bottom surface and sides of excavation at the rate of 5 litres of emulsion concentrate of 1.0 percent of chlorophyrifos per square meter of surface area covering 10 years guarantee on bond paper. B Spec. No. As Directed By Engineer In Charge. (I. No. 21.22 & P. No. 155)
4281.73
-
-
... More
Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating the top surface of plinth filling at the rate of 5 litres of emulsion concentrate at 1.0 percent of clorophyrifos per square metre of surface area covering ten years guarantee on bond paper. Spec. As directed by Engineer in charge. (I. No. 21.24 & P. No. 156 )
2321.5
-
-
... More
Filling in plinth and floors with approved excavated material in 15cm.to 20cm. layers including watering and compacting etc. complete. Spec. No Bd.A.10 Page No. 262 (I. No. 21.36 & P. No. 157)
1081.1
-
-
... More
Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete. Spec. No. Bd.A 11, Page No. 263 (I. No. 21.37 & P. No. 157 )
2880.72
-
-
... More
Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. Spec. No As director by engineer incharge. (I. No. 21.40 & P. No. 157 )
466.57
-
-
... More
Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) Spec. No. Bd.E.1 Page No. 287 (I. No. 24.01 & P. No. 175)
101.03
-
-
... More
Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/ granite/quartzite/gneiss metal for foundation and bedding / steps including steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface, only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.),with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Spec. No. Bd.E.2 Page One Number 288 and B.7 Page No 38 (I. No. 24.04 & P. No. 175)
50.21
-
-
... More
Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering, formwork ,cover blocks, laying/pumping, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc). Spec. No. Bd. F.3 Page No. 298 and B.7, Page No. 38 (I. No. 25.13 & P. No. 178)
320.78
-
-
... More
Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks compacting and roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)Spec. No. Bd.F.5 Page No. 300 And B7, Page No 38. (I. No. 25.33 & P. No. 180)
144.18
-
-
... More
Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) Spec. No. Bd.F.6 Page No. 300 and B.7, Page No.38 (I. No. 25.52 & P. No. 181)
169.54
-
-
... More
Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, compaction, finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) Spec. No. Bd.F.8 Page No. 302 and B.7, Page No.38 (I. No. 25.72 & P. No. 182)
30.4
-
-
... More
Providing and laying Cast in situ/Ready Mixcement concrete M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) Spec. No. Bd.F.9 Page No. 303 and B.9, Page No.38 (I. No. 26.07 & P. No. 184)
10.34
-
-
... More
Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc). Spec. No. Bd.F.11 Page No. 304 and B.7, Page No. 38 (I. No. 26.19 & P. No. 185)
-
-
-
... More
First And Tarrece Floor
21.27
-
-
... More
Providing and laying cast in situ / Ready mix cement concrete M-25 of trap / granite / quartzite / gneiss metal for R.C.C. waist slab, and steps of staircases as per detailed design and drawings or as directed including steel centering, plywood / steel formwork, steel props, laying / pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding einforcement, including cover block). (Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer / concrete Batch mix plant (Pan mixer) etc. complete. With Natural Sand / V.S.I. Quality Artificial Sand. Spec. No. : Bd.F. 13 Page No. 305. /I.S. 456 (2000) (I. No. 26.26 & P. No. 186)
5.01
-
-
... More
Providing and laying Cast in situ/Ready Mix cement concrete M-15 of trap/ granite/quartzite/gneiss metal for coping to plinth or parapet, moulded or chamfered as per drawing or as directed including steel centering, plywood/ steel formwork compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.) With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) Spec. No. Bd.E. 3/Page No. 288/I.S. 456 (2000 ( I. No. 24.16 & P. No 177 )
12.11
-
-
... More
Providing and laying in situ cement concrete M -30 with tremix treatment for 100 mm thickness for Concrete flooring is including laying plastic sheet for 125 micron thickness with groove cutting of 4 mm wide and 20 mm deep with necessary refilling with polysuphide sealent (Pouring grade) confirming to BS : 5212 - 1989 into sawed groove widened at top for sealent reservoir of specified size and shape as per detailed drawing including fixing Polyethylene foam backer rod of required diameter ( excluding reinforcement) with coarsen and fine aggregate Using V.S.I.Quality Artifitial Sand etc. complete with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete.. Spec. No. MORTH 602 ( I. No. 5.22 b P. No 45 )
193.36
-
-
... More
Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. Spec. No. Bd.F.17 Page No. 306. ( I. No. 26.33 & P. No. 188)
75.52
-
-
... More
Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete. Spec. No. Bd.G. 1. Page No. 313 ( I. No. 27.01 & P. No. 197 )
91.92
-
-
... More
Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in Superstructure of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete. Spec. No. Bd.G. 1. Page No. 313 ( I. No. 27.05 & P. No. 197)
472.8
-
-
... More
Providing internal cement plaster 6 mm thick in a single coat in cement mortar 1:3 without neeru finish to concrete surface in all positions including scaffolding and curing etc. complete. Spec. No. Bd.L.1 Page No. 367 ( I. No. 32.02 & P. No. 209)
22.5
-
-
... More
Providing internal cement plaster 12mm thick in single coat in cement mortar 1:3 without neeru finish to concrete or brick surfaces, in all position including scaffolding and curing etc. complet. Spec. No. Bd.L. 2 Page No. 368 ( I. No. 32.05 & P. No. 209)
1553.88
-
-
... More
Providing patti / band 75mm wide on plastered surface 12 mm to15 mm thick in C.M.1:3 line and level including neat finishing scaffolding curing etc. complete.. Spec. No. As directed by Engineer in charge. ( I. No. 32.23 & P. No. 210)
100
-
-
... More
Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete. Spec. As directed by Engineer in charge. ( I. No. 32.34 & P. No. 212)
1669.68
-
-
... More
Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc. complete. Spec. No. Bd. L.7 Page No. 369. ( I. No. 32.11 & P. No. 209)
2340.37
-
-
... More
Providing and applying Texture plaster with finishing with texture material of approved make in 3 to 4 millimeter thickness on previously plastered surface, including Plaster Groove 6mm thickness or Tape Grooves 35 to 45 mm thickness or as required, in all position including preparing the surface, scaffolding etc. complete. Spec. No As director by engineer incharge. ( I. No. 32.32 & P. No. 211)
432.44
-
-
... More
Providing and fixing chicken mesh of 22 gauge, with about 30 cm. width at the junction of R.C.C members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete /B.B.masonry and or tying by binding wire etc. complete. Spec. No As director by engineer incharge. ( I. No. 32.26 & P. NO 210)
1410.4
-
-
... More
Providing and laying machine cut machine polished machine cut Kota stone slabs 20 to 25 mm thick for treads and risers of steps and staircases, with rounded nosing for the treads on a bed of 1:4 cement mortar including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete Spec. No .BDM-22, Page No. 390 ( I. No. 33.18 & P. No. 215)
92.36
-
-
... More
Providing and laying machine cut machine polished kota stone flooring 25 mm to 30 mm thick and required width in plain / diamond pattern on bed of 1:6 C. M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete. Spec. No. Bd.M.3 Page No. 380 ( I. No. 33.06 & P. No. 213)
170.64
-
-
... More
Providing sills of polished Kota stone 25 mm to 30mm thick, on a bed of 1:4 cement mortar including cement float, filling joints with slurry, curing polishing and cleaning etc. complete. Spec. No. Bd.M.29 Page No.391. ( I. No. 33.19 & P. No. 215 )
40.39
-
-
... More
Providing and laying vitrified mirror / glossy finish tiles decorative type having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete. Spec. No. Bd.M. 12 Page One Number385 ( I. No. 33.40 & P. No. 217)
25.2
-
-
... More
Providing and laying vitrified mirror / glossy finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete. Spec. No. Bd.M. 12 Page One Number385 ( I. No. 33.41 & P. No. 217)
2.06
-
-
... More
Providing and laying Vitrified MATT finish having decorative type of size 1000 millimeter x 1000 millimeter of 8 to 10 millimeter thickness (on a existing flooring) with bonding chemical and confirming to IS 15622- 2006 (Group Bla) of approved make shade and pattern for flooring in required position laid on a bed of bonding chemical filling joints curing and cleaning etc .complete. a) Flooring. Spec. No. Bd. M-12 page Number 388 ( I. No. 33.61 & P. No. 220)
12.6
-
-
... More
Providing and laying Antiskid Ceramic tiles of approved quality of size 30cmx30cm and confirming to IS15622-2006 (Group-BIIA)for antiskid flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. complete. Spec. No. Bd.M.13 Page One Number 386. ( I. No. 33.67 & P. No. 220)
49.1
-
-
... More
Providing and laying ceramic tiles of having size 30cm. x 60cm. and confirming to corresponding I.S. for dado and skirting in required position with ready made adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete. Spec. No. Bd.M.13 Page One Number 386. ( I. No. 33.27 & P. No 215 )
264.69
-
-
... More
Providing and laying in position flooring of telephone black / Amba White / Cat Bary Brown / Ruby Red / Ocean Brown Granite Stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete. Spec. No. Bd.M. 3 B/Page Number 380 ( I. No. 33.34 & P. No. 216)
6.3
-
-
... More
Providing sills of required material 20mm to 25mm thick, on a bed of cement mortar 1:4 including cement float, filling joints with neat cement slurry, curing, moulding edges, polishing,cleaning complete. b) Granite. Spec. No. Bd.M. 31 Page No.393. ( I. No. 33.22 & P. No. 215 )
69.53
-
-
... More
Providing and fixing machine cut mirror polished 18 mm to 20 mm thick telephone black granite / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone partition with full moulding the edges etc. complete. Both side polish. Spec. No . Bd.M.35 B/Page Number393 ( I. No. 33.36 & P. No 216 )
13.5
-
-
... More
Providing and laying telephone black / Amba White / Cadburybrown / Ruby red / Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing the sharp edges wherever necessary, curing, etc. complete. Spec. No . As directed by engineer- in- charg. ( I. No. 33.68 & P. No 220)
14.61
-
-
... More
Providing and fixing heavy duty inter locking concrete RUBBER MOULD GLOSSY PAVING BLOCKS of 60 millimeter thickness of having a strength of 400 Kilogram/sq.m of approved quality and shape on a bed of crushed sand of 25 to 30 millimeter thick including striking joints and cleaning etc. complete. (using 100% crushed sand) Spec. NoBd. M-12 page One Number 385. ( I. No. 33.53 & P. No. 219)
198
-
-
... More
Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete. Spec. No. Bd.C.2 Page No. 275 ( I. No. 23.01 & P. No. 173 )
10.15
-
-
... More
Providing, fabricating and erecting at site of work the tubular steel structure (shed) as per standard design and specifications having various spans in between trusses and in multiples of standard length of bays as specified as per standard specifications, inclusive of cost of steel tubular trusses, tubular columns purlins, tie runners, foundation bolts, base plates, nuts and bolts, welding wherever required etc. as per detailed drawing inclusive of one coat of anticorrosive paint and two coats of oil painting of approved quality and shade etc. complete. Spec. Number : As directed by Engineer-in-charge. Spec. No. As directed by Engineer-In- Char ( I. No. 23.07 & P. No. 174 )
2.92
-
-
... More
Supplying and Erecting Pre Engineering Building (PEB) Structure as per Detail design and drawing of Primery member such as columns, rafter, monitor roof, gable end columns, crane and secondery member such as roof bracing, columns bracings, purlins, wall girt, cleat clips, eves strut, hanger bracing, sag rod should be confirming to IS CODE - 800 & 875, 1893, AISC, MBMA. All steel supply should be in sound condition. All the fabrication work should be done as per IS-800. All structural member should be weld should be confirm IS-816, welding steel confirming to IS-2062,8500, used welding electrodes confirming to IS-814 and necessery size nut bolt including fabriction work of Canopy and valley gutter as per drawing, cleaning to remove dirt, grease, oil and loose mill, one coat of anticorrosive paint and two coats of synthetic enamle paint shall be confirming to IS-102,104. and all Provisions for elecrical lumineries and fitting fixing with all materials supply, transportation to place of work. Spec. No. As Directed By Engineer In Charge. (NON SSR) Note- Preparation of shop drawing is under the scope of contractor.
Note- Preparation of shop drawing is under the scope of contractor ( Non S. S. R.)
78.35
-
-
... More
Providing and fixing colour coated Zincalume ( R ) AZ150 ( min 150 gms/sq.mt. total on each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi-strength steel with min.550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% aluminium 43.4% zinc 1.6% silicon) with COLORBOND ( R ) steel quality super durable polyester paint coat ( with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square fluting in the five pan at nominal 180-250 mm center- to-center. The end rib shall be designed for anti-capillary groove. and return leg. The feed material should have coil manufacturers product details marked a regular interval. Including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. complete. (weight of profile 4.52 Kilogram/ One Square Metre) ( I. No. 38.34 & P. No . 237 )
-
-
-
... More
First And Tarrece Floor ( )
2416.08
-
-
... More
Providing and fixing frame with / without ventilator of size as specified with country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete. Spec. No As director by engineer incharge. ( I. No. 39.01 & P. No. 245 )
0.64
-
-
... More
Providing and fixing M40 grade thick vibrated pull cast or similar type concrete frame with chamfer conforming to I.S.65241983 having 6 mm dia bars 3Nos. And strips @ 250 mm c/c and fixing in wall with 6Nos. of hold fast of 12mm dia bars 500 mm long including primer and oil painting etc,complet e) frame size 60 mm x 125 mm. Spec. No As director by engineer incharge. ( I. No. 39.57 & P. No 257 )
-
-
-
... More
First And Tarrece Floor ( )
82.4
-
-
... More
Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete. Spec. No. BD-T-34 Page Number 499. ( I. No. 39.09 & P. No. 246)
43.42
-
-
... More
Providing and fixing fiber glass reinforced polyster door shutter 30 mm thick as per IS 14856 (2000) (Reaffirmed 2006) without ventilator including chromium plated fixtures and fastening with chromium plated handles on both sides, etc comple. Spec. No. As directed by Engineer in charge. ( I. No. 39.58 & P. No. 257 )
13.23
-
-
... More
Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9 mm with lock plate of 3.15 mm thickness reinforced with 35 x 35 x 5 mm angle section fitted with sliding bolts and handles for both sides, deep M.S. channel section of depth and thickness not less than 65 mm and 3.15 mm respectively with hold fast arrangements, M.S. Bracket plate 300 x 300 x 3.15 mm minimum size and shape with square bar, suspension shaft of minimum 32 mm diameter, hood cover of M.S. sheet not less than 0.9 mm thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade cast iron or mild steel and one coat of red lead primer etc. complete. (I.S. 62481979) (With mechanical gear) Spec No. : BD-T-55 Page One Number 510 ( I. No. 39.25 & P. No . 249 )
52.8
-
-
... More
Providing and fixing in position (as per 1868 / 1982) Alluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 kg/Rmt. with window frame bott m track section 92 x 31.75 x 1.30 mm at weight 1.070 kg/Rmt.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. and handle and top section 40 x 18 x 1.25 mm at weight o.417 kg/Rmt. As per detailed drawings and as directed by Engineerincharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With colour Anodising with box Spec as directed by engineer in charge. ( I. No. 39.41 & P. No. 253 )
89.1
-
-
... More
Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating / clour anodised as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete. Spec as directed by engineer in charge. ( I. No. 39.68 & P. No. 259 )
5.4
-
-
... More
Providing and fixing mild steel grill work for windows, ventilators etc. 20 kg/sqm as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete. Spec. No. Bd.U.1 Page No. 537 ( I. No. 40.01 & P. No. 264 )
95.4
-
-
... More
Providing and fixing mat finish stainless steel (of 302 grade ) railing with top pipe of 50 mm dia. and vertical pipe of 38 mm dia at 0.60 m c/c or as required and horizontal pipes of 25 mm dia in three rows, all pipes of 2 mm thick including buffing,fabricating fixtures and fastening including pipe base of appropriate diameter and ball base of 75 mm dia above newel post of 75 mm diameter etc. complete (Prior approval of sample and brand by Ex. Engineer is necessary before use). Spec. No As director by engineer incharge. ( I. No. 40.08 & P. No. 265 )
13.3
-
-
... More
Providing and fixing in position, Double shuttered aluminium extruded powder coated openable door of specified size with aluminium door frame of powder coated / clour anodised section 101.60 x 44.75mm , 3.18 mm thick and shutter comprising of powder coated section having bottom and lock rail of size 150 mm x 44.5 mm x 3.00 mm thick top rails 47.62 x 44.45 mm x 3.00 mm thick , vertical style 47.62 x 44.45 mm, 3.00 mm thick and for shutter plain glass panes 5 mm thick for top panels and 12mm thick both side laminated phenol bonded particle board panels for bottom panels etc. , I.S.I. mark , heavy duty, Hydraulic floor spring of 150Kilogramcapacity , having heavy duty concealed lock, necessary beading, glazing clips, PVC gaskets, 250mm length aluminium tower bolts, 150mm dia. pad handle, etc. as per detailed design and drawing or as directed by engineer in charge including all materials , labours, and equipment etc.complete. Spec. No As director by engineer incharge. ( I. No. 39.63 & P. No. 258)
21.6
-
-
... More
Providing and fixing in position, Single shuttered aluminium extruded powder coated openable door of overall size 0.90 m x 2.40 m with aluminium door frame of powder coated / clour anodised section 101.60 x 44.75mm , 3.18 mm thick and shutter comprising of powder coated section having bottom and lock rail of size 150 mm x 44.5 mm x 3.00 mm thick top rails 47.62 x 44.45 mm x 3.00 mm thick , vertical style 47.62 x 44.45 mm, 3.00 mm thick and for shutter plain glass panes 5 mm thick for top panels and 12mm thick both side laminated phenol bonded particle board panels for bottom panels etc. , I.S.I. mark , heavy duty, Hydraulic floor spring of 150Kilogramcapacity , having heavy duty concealed lock, necessary beading, glazing clips, PVC gaskets, 250mm length tower bolts, 150mm diam. pad handle, etc. as per detailed design and drawing or as directed by engineer in charge including all materials , labours, and equipment etc.Complete. Spec. No As director by engineer incharge. ( I. No. 39.64 & P. No. 259)
9.6
-
-
... More
Providng and fixing in position anodised extruded aluminum partitions, partly glazed and p[artly laminated having frame made out of extruded tubular section of size 40 mm x 60 mm with 12 mm thick three layered flat pressed teak wood particle board bonded with BWP type exterior grade phenol formaldehyde synthetic resin conforming to IS 128231990, laminated on both sides, Novateakor equivalent and 5 mm thick selected quality plain/ float glass panels fixed with aluminum glass clips 12 mm x 12 mm and rubber cushioning beading to glass partitions as per approved drawing etc. complete. Spec. No. As directed by engineer in charge. ( I. No. 39.72 & P. No. 260)
32
-
-
... More
Providing and applying two coats of exterior acraylic emulsion paint confirming to corresponding I.S. of approved manufacture and of approved colour to the plastered surfaces including cleaning, preparing the plaster surface, applying primer coat, scaffolding if necessary, and watering the surface for two days etc complete. Spec. No As director by engineer incharge. ( I. No. 35.25 & P. No. 225)
2312.06
-
-
... More
Providing and applying priming coat on concrete/ masonary / asbestos cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete. Spec. No As director by engineer incharge. ( I. No. 35.21 & P. No. 225)
1629.77
-
-
... More
Providing and applying plastic emulsion paint of approved quality, colour and shade to new surface in three coats including scaffolding, preparing the surface. (excluding primer coat) etc. complete ( I. No. 36.14 & P. No. 228 )
1669.68
-
-
... More
Providing and applying two coats of synthetic enamel paint of approved colour to new /old structural steel work and wood work in buildings, including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat) etc. complete. Spec. No. Bd.O.5 Page No.405. ( I. No. 35.07 & P. No. 223)
178.75
-
-
... More
Providing and applying priming coat over new wood and wood based surfaces, including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter, sand papering and knotting, scaffolding etc. complete. Spec. No As director by engineer incharge. ( I. No. 35.19 & P. No. 224)
178.75
-
-
... More
Providing cement based water proofing treatment to terraces (Indian water proofing or a like) with brickbats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brickbats on bottom layer in C.M.1:5 admixed with approved waterproofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brickbats with C.M.1:3 admixed with approved waterproofing compound and finally top finishing with average 20mm. thick layers of same mortar added with jute fiber at 1 Kilogram per bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300 mm x 300 mm. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10years Guarantee against leak proofnesson Court fee stamp paper of Rs. 500/- including ponding test etc. complete. Spec. No As director by engineer incharge. ( I. No. 31.04 & P. No. 205 )
-
-
-
... More
First And Tarrece Floor ( )
175.21
-
-
... More
Providing and laying Hyperplas Aluminium or equivalent polymeric multiple monolithic five layer water proofing flexible, pliable and high tensile strength membrane (3 Kilogram/Square Metre) which is comprise of top with "V" shape embossed 40 micron Aluminium foil to bear thermal expansion and avoiding delamination & consist of centre core of 90 micron thick High Molecular High density Polyethylene film (HMHDPE) which is protected on both the side with polymeric mix. Applying the membrane by thermofusing to roof & parapet after applying thin film of hot blown bitumen 85/25 or 90/15 grade @ 1.2 Kilogram/Square Metre maximum as per surface condition or Hyperplas primer @ 250 gms/Square Metre as per site condition on the surface to be treated with 10 cm overlapping including finishing etc. complete and covering guarantee of 7 years on stamp paper of Rs. 100/- and as directed by Engineer-in-charge. (Prior permission of S.E.in writing is necessary before inclusion of this item in estimate). Spec. No. As directed by engineer in charge. ( I. No. 51.113 & P. No. 382)
-
-
-
... More
First And Tarrece Floor
76.7
-
-
... More
Providing waterproofing in W.C. and bath including brick bat coba in all position including providing and laying 12mm bedding in cement mortor 1:3 on vergin concrete slab with waterproofing compound @ 1Kilogram/per bag of cement laying brick bat coba of required thickness in cm 1:5 with waterproofing compound 1 Kilogram/bag of cement grouting and finishing the top layer with 20mm thick brick bedding in cm mortor 1:3 with waterproofing compound 1 Kilogram/per bag of cement and testing the treated portion for 48 hours by pond test and covering ten years' guarantee on requisite stamp paper including curing etc. complete. ( I. No. 31.26 & P. No. 208)
3.28
-
-
... More
Providing water proof bedding for flooring of Bath and WC 25 mm thick in C.M. 1:3 including using approved water proofing compound in specified proportion as per manufacturers specifications for per bag of cement including leveling, curing and covering 10 years guarantee on court fee stamp paper of Rs.500/- including ponding test etc. complete. Spec. No. As directed by Engineer in charge. ( I. No. 31.05 & P. No. 205)
32.82
-
-
... More
Providing waterproof plaster in W.C. and bath 20 mm thick for dado in cement mortar 1:3 with neat finishing, floating using waterproofing compound at the rate of 1 Kilogram. per bag of cement of approved make and manufacturer and curing (and filling joints of Nahani trap and any outlet by properly) etc. complet. Spec. No. As directed by Engineer in charge. ( I. No. 31.07 & P. No. 206)
141.08
-
-
... More
Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge ( I. No. 6.36 & P. No. 60)
1
-
-
... More
Providing & applying of a 4 Component, Single Layer Seamless Solvent Free, Moisture Intensive and Epoxy concrete flooring system of density more than 1950 Kg/Cu.mtr to have a smooth & even matt finish matching below mentioned performance properties: 1- Mixed density more than 1900kg/Cu.mtr. 2- Abrasion resistance class of AR 0.5 as per BS 8204-2. 3- Cleanable to standards of stainless steel. 4- Zero absorption as per CP. BM 2/67/2. 5- Static Modulus of Elasticity of 3.3 X 10^3 MPa and Toughness of 96.7 X 10^3 Mpa as per modified ASTM C469/C469M. 6- Coefficient of thermal expansion of 3.6 X 10^-5 /oC as per ASTM C531. 7- Shore D hardness of 80. 8- Tensile strength of 7Mpa. 9- Flexural strength of 20Mpa. 10- Adhesion to concrete of more than 2Mpa or until concrete fails. 11- Slip resistance classification 35 as per EN 13036-4. 12- Fire resistance classification of Bfl-S1 as per EN 13501-1:2002. 13- Surface spread of flame of CLASS 2 as per BS476, Part7. 14- Cure time of 12 Hours for foot traffic and 24 hours for vehicular traffic at 30oC. Applied at a thickness of 3mm over a 1mm scartch coat of the same material by an authorised applicator of the manufacturer in accordance to the application guidline as provided by the manufacturer. Spec. No. as Directed by Engineer In Charge. ( Non S. S. R.)
1529.8
-
-
... More
Painting letters upto 20 centimetre height including cost of brushes, coir brushes dusting, cleaning etcetera complete. Spec. No. As Directed By Engineer In Charge. Only For Road Side Furniture. Spec .No. MORTH 801 ( I. No. 6.05 & P. No.46 )
3000
-
-
... More
Providing and fixing European type white glazed earthenware coupled closet Symphonic trap with symphonic low level white glazed 10 litres cistern with black backlite seat with all necessary pipe connection etc. complete. Spec. No As director by engineer incharge. ( I. No. 42.34 & P. No. 277 )
2
-
-
... More
Providing and fixing 1st class white glazed earthenware orissa type w. c. pan 580 mm dia including P or S trap cast iron soil and vent pipe upto the outside face of the wall (1:5:1 0) cement concrete bedding 15 mm thick, 10 liter P.V.C. flushing cistern with all necessary pipe connection etc. complete. Spec. No As director by engineer incharge. ( I. No. 42.33 & P. No. 277 )
2
-
-
... More
Providing and fixing wall hung white wash basin of size 550 x 400 x 195 mm with pillar cock having flow rate up to 6.0 Litr/Minute,C.P.Angular stop cock long thread of Jaquar/Cera/Hindware /Perryware or equivalent make, including SS bottal trap of approved make etc complete as directed by Engineer in charge.( Make shall conform to manufacturer's Green product and shall got approved from the Engineer In Charge.) ( I. No. 48.32 & P. No. 277 )
4
-
-
... More
Providing and fixing White Glazed Earthenware full stall type Urinal with P.V.C. flushing cistern of 5 liters capacity with fitting, inlet pipes and stop tap, brackets for fixing the cistern, 32 mm dia. P.V.C flush pipe with fittings and flushing arrangement including lead soil pipe, lead trap, soil pipe connectionup to the outside face of the wall. Spec. No. Bd.V.23 Page One Number 562 ( I. No. 41.57 & P. No. 271 )
3
-
-
... More
Providing and fixing C.P. Handshower (health faucet) 1m.PVC tube with wall hook jaquar make (Cat. No. ALD 563 ) tube having wall hook with approved make including necessary sockets/ union nut etc. complete. Spec. No. As directed by engineer in charge. ( Material Sr. No. 234 & P. No. 536)
2
-
-
... More
Providing and fixing C.P. Two way BIB cock of approved make continental including necessary sockets/union nut etc. complete. Spec. No. As directed by Engineer in charge ( I. No. 42.80 & P. No. 282 )
4
-
-
... More
Providing and fixing C.P. BIB cock with wall flange of approved make including necessary sockets/ union nut etc. complete. Spec. No. As directed by Engineer in charge ( I. No. 42.83 & P. No. 283 )
4
-
-
... More
Providing and fixing C.P. pillar cock long neck with aerator of approed make including necessary sockets/union nut etc. complete. Spec. No. As directed by Engineer in charge. ( I. No. 42.82 & P. No. 282)
4
-
-
... More
Providing and fixing C.P. Angular stop clock with wall flange of approved make continental including necessary sockets / union nut etc. complete. Spec. No. As directed by Engineer in charge. ( I. No. 42.79 & P. No. 282)
6
-
-
... More
Providing and Fixing half turn 25 mm dia gun metal flushing cock including all accessories etc. complete. Spec. No. As directed by Engineer in charge. ( I. No. 42.32 & P. No. 277 )
4
-
-
... More
Providing and fixing chromium plated towel rod 16 mm dia and 75 cm. in length including all accessories complete. Spec. No As director by engineer in charge. ( I. No. 42.31 & P. No. 277 )
4
-
-
... More
Providing and fixing 450 mm x 550 mm size superior type belgium mirror with 16mm dia. nickel plated towel rod etc. complete. Spec. No As director by engineer in charge. ( I. No. 42.20 & P. No. 276 )
4
-
-
... More
Providing and fixing 15 cm rigid PVC Nahani trap including PVC grating , bend, connecting piece of UPVC pipe up to the outside face of wall , making the good damaged surface and testing etc. complete ( Prior approval of sample and brand by Ex. Engr. is necessary before use) Spec. No As director by engineer in charge. ( I. No. 43.18 & P. No. 288 )
8
-
-
... More
Providing and fixing 75 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete. Spec. No As director by engineer in charge. ( I. No. 42.51 & P. No. 279 )
44
-
-
... More
Providing , laying and fixing ,jointing supreme eco- drain 110 mm SN 8 Nu- drain UPVC pipes or of equivalent make, manufacture as per EN 13476 or equivalent as per I.S.15328 with fittings such a bends, tees, coupler, etc, jointing with rubber lubricant including necessary excavation, trench refilling with selective excavated material etc. complete. Spec. No As director by engineer in charge. ( I. No. 43.30 & P. No. 291 )
146
-
-
... More
Providing , laying and fixing ,jointing Supreme Eco- Drain 160 mm SN 4 Nu- Drain UPVC Pipes or of equivalent make, manufacture as per EN 13476 or equivalent as per I.S.15328 with fittings such a bends, tees , coupler, etc, jointing with rubber lubricant including necessary excavation, trench refilling with selective excavated materialetc. complete. Spec. No As director by engineer in charge. ( I. No. 43.31 & P. No. 291 )
180.19
-
-
... More
Providing and fixing 15cm x 10cm salt glazed stoneware gully trap in cement concrete 1:4:8 outside the building including cast iron grating in the sink, connecting glazed stoneware pipe, brick masonry chamber with cast iron lid and cast iron grating for the gully trap. Spec. No. Bd.V.38 Page No.572. ( I. No. 42.02 & P. No. 274 )
9
-
-
... More
Providing and laying concrete pipes of I. S. NP. class of 300 mm diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete. Spec. No. Bd.V.41 Page No.573. ( I. No. 42.09 & P. No. 274 )
15
-
-
... More
Providing and constructing brick masonry inspection chamber 60 cm x 45 cm x 90 cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with R.C.C. Cover medium duty 140 kg with frame etc complete. Spec. No. Bd.V.43 Page No.574. ( I. No. 42.12 & P. No. 275 )
32
-
-
... More
Providing and fixing 40 mm. dia Ball cock medium type with PVC float including sockets and necessary fittings and tested as per municipal requirements etc. complete. Spec. No As director by engineer in charge. ( I. No. 42.36 & P. No. 277)
2
-
-
... More
Providing and fixing 15 mm. dia Ball cock medium type with PVC float including sockets and necessary fittings and tested as per municipal requirements etc. complete. Spec. No As director by engineer in charge. ( I. No. 42.37 & P. No. 277 )
2
-
-
... More
Providing and fixing P.V.C. Rain water pipes of 160 mm outer diameter and having wall thickness of 2.2 To 2.7 mm confirming To I.S. 13592-1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and number, filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C. C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete. ( The contractor shall give 3 yrs guarantee bond for payment ). Spec. No As director by engineer incharge. ( I. No. 42.85 & P. No. 283 )
24
-
-
... More
Providing and fixing in position UPVC ultra violet stabilized 110 mm outer diameter cowl dome confirming to I.S.-4985 including making joints with solvent cement etc. complete. Spec. No As director by engineer incharge. ( I. No. 43.25 & P. No. 290 )
-
-
-
... More
First And Tarrece Floor
6
-
-
... More
Providing and fixing on walls / ceiling / floor 15 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. Spec. No. BD.V 5 page 551 and as directed by Engineer in charge. ( I. No. 42.55 & P. No. 280)
12
-
-
... More
Providing and fixing on walls / ceiling / floor 20 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. Spec. No. BD.V 5 page 551 and as directed by Engineer in charge ( I. No. 42.56 & P. No. 280)
21
-
-
... More
Providing and fixing on walls / ceiling / floor 25 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. Spec. No. BD.V 5 page 551 and as directed by Engineer in charge ( I. No. 42.57 & P. No. 280)
6
-
-
... More
Providing and fixing on walls / ceiling / floor 32 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. Spec. No. BD.V 5 page 551 and as directed by Engineer in charge ( I. No. 42.58 & P. No. 280)
7
-
-
... More
Providing and fixing on walls / ceiling / floor 40 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. Spec. No. BD.V 5 page 551 and as directed by Engineer in charge ( I. No. 42.59 & P. No. 280)
8
-
-
... More
Providing and fixing on walls / ceiling / floor 50 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. Spec. No. BD.V 5 page 551 and as directed by Engineer in charge ( I. No. 42.60 & P. No. 280)
5
-
-
... More
Providing and laying in trenches 50 mm dia. medium grade having embossed as ISI mark galvanised iron pipes of 5.17 kg / meter necessary fitting remaking good the demolished portion with filling trenches and with primer of anticorrosive oil paint, 2 coats removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. Spec. No. Bd.V.5 Page No. 551. ( I. No. 41.23 & P. No. 269 )
50
-
-
... More
Providing and Fixing toilet set for differently Abled persons consist of Floor Mounted white vitreous china water Closet including 6 litre capacity white vitreous china flushing Cistern with raised soft-push button, white vitreous china wash basin of size 46 x 36 cm and one no SS 304 hinged rail 76 cms & three no SS 304of (Grab Bar) 60 cms all including cutting and making good the walls and floors wherever required ,seat cover, cistern & wash basin fittings,nuts, bolts and gasket etc complete as per the direction of Engineer-In-charge. ( I. No. 51.63 & P. No. 369 )
1
-
-
... More
Providing and erecting chain link fencing 1.6 M. height with G.I. chain link of size 50 x 50 mm, 8 gauge thick and fixed 75 mm above ground level on vertical M.S. Angles of 40 x 40 x 6 mm size, includind excavating pits for foundation and embedded in C.C. block of 1:4:8 mix of size 450 x 450 x 670 mm. at 1.75 M. c/c with iron bar 16mm dia as hold fast including welding link with angle frame at 30 cm c/c with nuts and bolts and horizontal M.S. Angles at top and bottom of 25 x 25 x 5 mm size and vertical M.S. flat 35 x 5 mm and 25 x 5 mm horizontal including cross support of 40 x 40 x 6 mm angles both side at every corner or bend embedded in concrete blocks of 1:4:8 of size 450 x 450 x 670 mm including 3 coats of oil painting etc. complete. ( I. No. 46.39 & P. No. 298)
202
-
-
... More
Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed. ( I. No. 2.11 & P. No. 23)
123
-
-
... More
Excavation for Roadway In Hard Murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m.and spreading for embankment or stacking as directed. Spec. No. MORTH 301 ( I. No. 2.13 & P. No. 24)
123
-
-
... More
Providing earth work in embankment with approved materials obtained from other sources upto lead of 50m. including all lifts, laying in layers of 20cm. to 30cm. thickness breaking clods, dressing to the required lines, curves, grades & section, watering and compaction with vibratory roller with V-Sat attachment to achieve not less than 97 % of standard proctor density etc. complete ( Material obtained from Other sources) Spec. No. MORTH 305 ( I. No. 2.28 & P. No. 25)
2175.6
-
-
... More
Watering And Compacting Of Embankment Formed Of Materials Obtained From The Road Cutting within a lead of 50 m, not less than 97 % of standard Proctor density after laying them in layers of 20 cm. to 30 cm. with vibratory roller. Spec. No. MORTH 305 ( I. No. 2.23 & P. No.24)
2173.22
-
-
... More
Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting with vibratory roller to the required density. By Mechanical Means -Grading I (Using Screening Type B (11.2 mm) Aggregate) Spec. No. MORTH 404 ( I. No. 3.19 & P. No.29)
282.9
-
-
... More
Providing and constructing 75 mm. thick Modified Penetration Macadam (MPM) road surface including all materials, preparing the existing road surface, spreading 40 mm. stone metal layers 30% crusher broken metal + 70% Hand broken (by breaking rubble obtained by blasting) heating and spraying the bitumen of specified grade @ 2 Kg/sqm, spreading 12 mm.size chips compacting with three wheel static roller having weight 8 to 10 MT. to achive the desired degree of compaction as per Technical Specification Clause 506 etc. complete. Including picking of existing WBM surface. (VG-30 bulk bitumen rates are considered to arrive at rates). Spec. No. IRC-SP-20, 2002 Clause No. 8.7.3 ( I. No. 3.35a & P. No.31)
1230
-
-
... More
Providing and applying Tack Coat on the prepared surface heating by flames in Boiler and spraying bitumen with sprayer on Concrete surface treated with primer @ 3.25 kg/10 Sqm (VG-30 bulk bitumen rates are considered to arrive at rates) Spec. No. MORTH 503 ( I. No. 3.33 & P. No.31)
2460
-
-
... More
BITUMINOUS MACADAM: Providing and laying bituminous macadam using crushed aggregate of Grading 1, premixed with bituminous binder, transported at site with VTS, laid over a previously prepared surface , finished to the required grade ,level, alignment,and rolling to achieve the desired density for 80/100 mm compacted thickness with drum mix type hot mix plant with SCADA having complying essential features of Hot mix plant as per IRC-27 2009 specified conditions and attachments such as electronic load sensor based belt conveyers,automatic synchronization of bitumen and aggregate fedder,built in dust controller system and PLC for Drum Mix plant ,Sensor paver,and Vibratory roller excluding prime/Tack coat etc. complete --Bitumen 3.30% of specified grade (VG-30 bulk bitumen rates are considered to arrive at rates) Spec. No. MORTH 504 ( I. No. 3.40 & P. No.33)
61.5
-
-
... More
BITUMINOUS CONCRETE:- Providing and laying bituminous concrete using crushed aggregates of grading 1, premixed with bituminous binder @ 5.20 per cent by weight of total mix and filler, transported to site with VTS , laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired compaction for 50 mm compacted thickness with specified grade of Bitumen,Excluding prime / tack coat. For Bitumen of specified grade -- USING Batch mix type hot mix plant with SCADA, Sensor Paver, Vibratory roller with Stone Dust filler. (VG-30 bulk bitumen rates are considered to arrive at rates) ( I. No. 3.48 & P. No.34)
19.46
-
-
... More
Painting Line, Dashes, Arrows Etc On Roads In Two Coats On New Work With Ready Mixed Road Marking Paint confirming to I.S. 164 on Bituminous surface including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site and traffic control a. Over 10 Cm Wide New Surface. Spec. No. MORTH 801 ( I. No. 6.08 & P. No.46)
7.5
-
-
... More
Providing and laying cement concrete pipe of IS 458:2003 NP-2 class of 900mm diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete. Spec. No. CD.7 Page.No. 162 ( I. No. 11.11 & P. No.81)
10
-
-
... More
Providing and fixing 20 to 25 mm thick rough shahabad box type waterproofing treatment to vertical outside faces of Reinforced Cement concrete walls of basement or underground floor including filling the gap of 25 mm between rough shahabad and R.C.C. walls with cement grout mixed with water proofing liquid Algae proof or other alike with one tile lift method, brushing the joints horizontally with cement slurry mixed with water proofing liquid for width 30 to 35 mm and sloping coping over topmost tile with cement mortar 1:3, butting the bottom most with Cement concrete 1:2:4 mixed with water proofing liquid, curing, with 7 years guarantee on court fee stamp of Rs.100/- with ponding test etc complete. (excluding Cement concrete 1:3:6 base concrete) Spec .No. Bd. J.2 Page No. 355 ( I. No. 31.13 & P. No. 207)
63
-
-
... More
Providing fine cement finish 1.5 mm thick over green plaster surface including scaffolding curing etc. complete. Spec. No As director by engineer incharge. ( I. No. 32.21 & P. No. 210)
30.2
-
-
... More
Providing , laying and fixing ,jointing supreme eco- drain 200 mm SN 4 Nu- drain UPVC pipes or of equivalent make, manufacture as per EN 13476 or equivalent as per I.S.15328 with fittings such a bends, tees, coupler, etc, jointing with rubber lubricant including necessary excavation, trench refilling with selective excavated materialetc. complete. Spec. No As director by engineer incharge. ( I. No. 43.32 & P. No. 291)
75
-
-
... More
Providing , laying and fixing ,jointing supreme eco- drain 250 mm SN 4 Nu- drain UPVC pipes or of equivalent make, manufacture as per EN 13476 or equivalent as per I.S.15328 with fittings such a bends, tees, coupler, etc, jointing with rubber lubricant including necessary excavation, trench refilling with selective excavated materialetc. complete. Spec. No As director by engineer incharge. ( I. No. 43.33 & P. No. 291)
75
-
-
... More
Providing , laying and fixing ,jointing supreme eco- drain 315 mm SN 4 Nu- drain UPVC pipes or of equivalent make, manufacture as per EN 13476 or equivalent as per I.S.15328 with fittings such a bends, tees, coupler, etc, jointing with rubber lubricant including necessary excavation, trench refilling with selective excavated materialetc. complete. Spec. No As director by engineer incharge. (I. No. 43.34 & P. No. 291)
50
-
-
... More
Providing & constructing brick masonry inspection chamber 90 cm x 45 cm x 90 cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and airtight C. I. lid 65 kg with frame fixed in cement concrete etc. complete with R.C.C. Cover medium duty 140 kg with frame etc complete.. Spec. No. Bd.V.43 Page No.574. ( I. No. 42.13 & P. No. 275 )
6
-
-
... More
Providing and constructing Ductile Iron circular manhole 45 cm dia. At top 90 cm at bottom up to 1.80 meter to 2.70 meter depth including excavation, laying 1:4:8 cement concrete bedding 15 cm thick burnt brick mansonry with 1:1 cement mortar plaster 25 mm thick inside and outside 20 mm (1:3) ductile iron heavy type cover with ring 125Kilogramin weight. High strength. More life and Durability, Good Antiskid Grip, Suitable to heavy theatric loading, Light weight casting after cost benefits for Transportation Refilling etc. as per requirement. with prior approval of concerned Superitending Engineer. Spec. No.As directed by Engineer-in-charge ( I. No. 50.31 & P. No. 337)
3
-
-
... More
Providing and installing bio digester unit based on DRDO technology made of fibre reinforced plastic (FRP) having composition and following technical specifications and including necessary pipe and accessories up to 3 meter length, excluding the necessary excavation for installing the bio digester. Percentage of fibre glass (glass content in fibre glass should be minimum 30%): -33.33% Percentage of polyester resin: - 66.67%, Water absorption (as per ASTM):-0.30% Flammability as per ASTM, Tensile strength:-115 MPA, Specific Gravity at 25 degree centigrade 1.45 Izod impact strength:-65KJ/M2, Heat defection/distort temperature:-65deg C Corrosion resistance (Non Corrosive) fitted with Inlet pipe size rigid PVC: -100mm, Outlet pipe size rigid PVC:-80mm, Gas outlet rigid PVC with Valve: 20mm, Bacteria immobilization PVC mattes (on all partition), With DRDO TOT licensee and latest batch, certificate(month & year of supply) and capacity as below. e) Up to 60 user size (2.4mx1.25mx1m), Capacity of Biodigester:-3000 liters, Area of top, bottom and side walls: - 13.30 sq.m, Area of partition walls: 3.75sq.m, Total weight of FRP: - 139.95 Kilogram, Bacteria inoculums quantity: - 1000 liters, Minimum thickness of side walls / top and bottom: 5mm, One Number of inside partitions: - 3, Minimum thickness of partition wall: 3mm ( I. No. 51.112 ( e ) & P. No. 485, 381 )
1
-
-
... More
Providing soak pit of size 120 cm x 120 cm x 120 cm including excavation and filling with brick bats. Spec. No. Bd.V.46 Page No.576. ( I. No. 42.19 & P. No. 275 )
2
-
-
... More
Providing and laying in trenches 25 mm dia. heavy grade having embossed as ISI Mark galvanised iron pipes of 6.33 Kilogram/metre necessary fitting remaking good the demolished portion with filling trenches and with primer of anti-corrosive oil paint , 2 coats complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. ( I. No. 43.11 & P. No. 287 )
100
-
-
... More
Providing and laying in trenches 50 mm dia. heavy grade having embossed as ISI Mark galvanised iron pipes of 6.33 Kilogram/metre necessary fitting remaking good the demolished portion with filling trenches and with primer of anti-corrosive oil paint , 2 coats complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. ( I. No. 43.14 & P. No. 288)
50
-
-
... More
Providing and laying in trenches 80 mm dia. heavy grade having embossed as ISI Mark galvanised iron pipes of 10.15 Kilogram/metre necessary fitting remaking good the demolished portion with filling trenches and with primer of anti-corrosive oil paint , 2 coats complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. ( I. No. 43.15 & P. No. 288)
50
-
-
... More
Providing and laying in trenches 100 mm dia. heavy grade having embossed as ISI Mark galvanised iron pipes of 14.74 Kilogram/metre necessary fitting remaking good the demolished portion with filling trenches and with primer of anti-corrosive oil paint , 2 coats complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. ( I. No. 43.16 & P. No. 288)
50
-
-
... More
Providing and fixing 50mm diameter water meter with non-return valve including strainer,sockets/ union nut and including water meter box making locking arrangement and lock. [without chamber] ( I. No. 41.30 & P. No. 269)
1
-
-
... More
Providing and fixing 80mm diameter water meter with non-return valve including strainer, sockets/ union nut and including water meter box making locking arrangement and lock.[Without chamber]. ( I. No. 41.31 & P. No. 269)
1
-
-
... More
Providing and fixing 100mm diameter water meter with non-return valve including strainer, sockets/ union nut and including water meter box making locking arrangements and lock. [Without chamber]. ( I. No. 41.32 & P. No. 269)
2
-
-
... More
Boring/drilling bore well of 300mm dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machinery required for the job, all complete as per direction of Engineer in charge, upto 90m depth below ground level. ( I. No. 48.48 & P. No. 317 )
182
-
-
... More
Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well-casing pipe of 150mm dia, conforming to IS:12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per the direction of Engineer in charge. ( I. No. 48.49 & P. No. 318 )
60
-
-
... More
RWH - Shallow Percolation Pit providing, constructing 2.0m deep shallow depth percolation pit comprising of 1.0m dia pre-cast RCC rings, 300mm thick side filling around outside of RCC rings (annular space) with 40mm size boulders including filling of percolation pit up to 0.5m depth (from bottom up) with 25-75mm clean washed gravels followed by 0.5m depth of 10-25mm of clean washed stones followed by 0.5m of washed river fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) including netlon mesh between each gravel/fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) media layer including covering with RCC slab, manhole frame & cover, PVC rungs etc. including arrangement for inlet & outlet pipe, excavation & backfilling as shown in the drawing. The rate shall be inclusive of all labour, material, wastage, scaffolding, transportation, taxes, including all leads, lifts at all levels. All material should be of approved make. All works complete as per the drawing, technical specification and direction of the Engineer in charge . Spec. No. As directed by Engineer in charge. ( I. No. 48.46 & P. No. 317 )
1
-
-
... More
Mixing garden soil/silt &manure thoroughly well, watering previous night. Planting required plant species, lawn grass as directed etc. complete. (1/10 of Semiskilled labour) ( Pune D. S. R . 2017-18 Garden Dept. Labour Part - 1, I. No. 3)
127.2
-
-
... More
GARDEN SOIL :- Supplying on site garden soil well sieved 90% to pass through I.S. sieve of 10mm size free from stones rubbish like dried grass roots and other such materials. The soil should be fresh from quarry. The colour of the soil generally be red. The soil will be measured by measuring box. (Farma) Item includes royalty charges, octroi, corporation Tax Transporting, loading -unloading etc (.Lead charges per 10 km. considered.) ( Pune D. S. R . 2017-18 Garden Material Part - 2, I. No. 1)
64.98
-
-
... More
FARM YARD MANURE : - Supplying on site well decayed, well dried, well powdered, without clods and free from stones, dried grass and other rubbish material. The colour of the manure generally be black. The manure will be measured by measuring box.(Farma) Item includes Transporting, loading-unloading etc. (Lead charges per 10 km. are considered.) ( Pune D. S. R . 2017-18 Garden Material Part - 2, I. No. 2)
36
-
-
... More
Preparing Lawn ( 30 cm. Depth):- Excavating the ground upto required depth of 30cms. Removing & conveying unwanted stuff to a required distance as directed. Filling fresh garden soil/silt & manure in excavated area in 3:1 proportion to a height of 30cms. Mixing garden soil and manure thoroughly well, levelling, watering on previous night. Planting required variety of lawn grass as directed and maintaining till well established by watering, weeding, clipping, rolling, etc. complete. ( Pune D. S. R . 2017-18 Garden Horticulture Part - 3, I. No. 1)
80
-
-
... More
Preparing Lawn (20 cm depth):- Excavating the ground to a required depth of 20cms,removing & conveying unwanted stuff to a required distance as directed. Filling fresh garden soil/silt & manure in excavated area in 3:1 proportion to a height of 20cms. Mixing garden soil and manure thoroughly well, levelling, watering on previous night. Planting required variety of lawn grass as directed and maintaining till well established by watering, weeding, clipping, rolling, etc. complete ( Pune D. S. R . 2017-18 Garden Horticulture Part - 3, I. No. 2)
80
-
-
... More
Preparing Instant Lawn : - Excavating the ground to a required depth of 20cms,removing & conveying unwanted stuff to a required distance as directed. Filling fresh garden soil/silt & manure in excavated area in 3:1 proportion to a height of 20cms. Mixing garden soil and manure thoroughly well, levelling, watering on previous night. Planting required variety of lawn grass as directed and maintaining till well established by watering, weeding, clipping, rolling, etc. complete. ( Pune D. S. R . 2017-18 Garden Horticulture Part - 3, I. No. 3)
80
-
-
... More
Preparing Edging or Border :- Excavating the ground to a required depth of 20 cms. in the required area, removing and conveying unwanted stuff, rubbish to the required distance as directed. Filling the excavated part with fresh soil and manure in 3:1 proportion to a required height to 20 cms. Mixing, levelling, watering the same. Planting rooted edging/border plants at distance of 20 cms. apart watering, weeding, stirring of soil, replacing casualties, pruning if necessary etc. complete ( Pune D. S. R . 2017-18 Garden Horticulture Part - 3, I. No. 4)
10
-
-
... More
Planting clipped Hedge:- Excavating the ground to a required depth of 30 cm, removing and conveying unwanted stuff to a required distance as directed. Filling fresh garden soil and manure in excavated area in 3:1 proportion to a height of 30cms. Mixing garden soil and manure thoroughly well, levelling, watering previous night. Planting hedge plant of required species in two rows. Distance between two rows & between two cutting will be 25cms. Maintaining till well established by watering, weeding, stirring the soil and clipping if necessary etc. complete ( Pune D. S. R . 2017-18 Garden Horticulture Part - 3, I. No. 5)
10
-
-
... More
Preparing flower Bed:- Excavating the ground to the required depth of 30cms, Removing and conveying unwanted stuff to a required distance as directed,Filling fresh garden soil & manure in excavated area in 3:1 proportion to a required height of 30cms Mixing garden soil and manure thoroughly well, levelling, watering,on previous night. Planting seedlings of required annuals 25cms, apart Maintaining till well established by watering, weeding, Stirring replacing of casualties etc, Complete ( Pune D. S. R . 2017-18 Garden Horticulture Part - 3, I. No. 6)
10
-
-
... More
Preparing Canna Bed:- Excavating the ground to the required depth of 30cms.Removing rubbish and conveying unwanted stuff to a required distance as directed. Filling fresh garden soil and manure in excavated area in 3:1 proportion to a required height of 30cms.Mixing gar den soil & manure thoroughly well, levelling, watering on previous night. Planting well developed Canna rhyzomes 40 cms apart. Maintaining till well established by watering weeding, stirring, replacing, casualties etc. complete ( Pune D. S. R . 2017-18 Garden Horticulture Part - 3, I. No. 7)
10
-
-
... More
Preparing Shrubbery.- Excavating the ground to required depth of 30cms. Removing and conveying unwanted stuff to a required distance as directed . Filling fresh garden soil & Manure in excavated area in 3:1 proportion to a height of 30cms. Mixing garden soil & manure thoroughly well, leveling, watering on previous night. Planting well- developed shrubs plant 0.5 Mtrs. apart as directed and maintaining till well established by watering, weeding, stirring, replacing casualties etc.complete. ( Pune D. S. R . 2017-18 Garden Horticulture Part - 3, I. No. 8)
10
-
-
... More
Rose Plant :- Excavating pit with size 0.3 x 0.3 x 0.3 m. removing and conveying unwanted stuff to a required distance as directed. Filling the pit with fresh garden soil and manure in 3:1 proportion to a height of 0.3m.mixing the soil & manure thoroughly well, levelling watering on previous night. Planting 40 to 50 cms. height healthy plant of required rose variety. Maintaining till well established watering, weeding, stirring, prunning, replacing the casualties etc, complete. ( Pune D. S. R . 2017-18 Garden Horticulture Part - 3, I. No. 9)
10
-
-
... More
Mogra Plant /Creepers/Climbers:- Excavating pit with size 0.3m x 0.3m x 0.3m,removing and conveying unwanted stuff to a required distance as directed. Filling the pit with approved excavated material upto a height of 0.15 mtr. and remaining height of 0.15mtr.with fresh garden soil and manure in 3:1 proportion. Mixing soil and manure thoroughly well levelling, watering, on previous night. Planting one or two year old healthy plant as per specifications. Maintaining till well established by watering, weeding, prunning, stirring, replacing casualties, etc, complete ( Pune D. S. R . 2017-18 Garden Horticulture Part - 3, I. No. 10)
10
-
-
... More
Planting Large Flowering / Shady Trees (Minimum Height 1 Mtr.): - Digging pit with size 0.9 x 0.9 x 0.9m, removing & conveying unwanted stuff to a required distance as directed. Filling the pit with appvoed excavated material upto a ht. of 0.30m. and remaining ht. of 0.60m. with fresh garden soil & manure in 3:1 proportion. Mixing soil & manure throughly well, leveling as directed, watering previous night, planting two to three year old min. 1.0 mtr. ht., healthy trees sapling as per specifications, Maintaining till well establighed by watering, weeding, stiring of soil replacing of casulaties etc. complete. ( Pune D. S. R . 2017-18 Garden Horticulture Part - 3, I. No. 11)
10
-
-
... More
Planting Large Flowering / Shady Trees (Minimum Height 2 Mtr.): - Digging pit with size 0.9 x 0.9 x 0.9m, removing & conveying unwanted stuff to a required distance as directed. Filling the pit with appvoed excavated material upto a ht. of 0.30m. and remaining ht. of 0.60m. with fresh garden soil & manure in 3:1 proportion. Mixing soil & manure throughly well, leveling as directed, watering previous night, planting two to three year old min. 1.0 mtr. ht., healthy trees sapling as per specifications, Maintaining till well establighed by watering, weeding, stiring of soil replacing of casulaties etc. complete. ( Pune D. S. R . 2017-18 Garden Horticulture Part - 3, I. No. 12)
10
-
-
... More
Planting Small & Medium Size Ornamental / Flowering Plant:- Digging pit with size 0.6 x 0.6 x 0.6 m, removing & conveying unwanted stuff to a required distance as directed Filling the pit with fresh gardin soil & Farm Yard Manure upto a ht. of .060 m. in 3:1 proportion, Mixing soil & Manure throughly well, leveling, watering on previous night, Planting one to two year old healthy plant saplings as per sep. Maintaining till well establshed by watering, stiming, of soil and manure, replacing casulaties etc. complete. ( Pune D. S. R . 2017-18 Garden Horticulture Part - 3, I. No. 13)
10
-
-
... More
Preparing ground covers; - Excavating the ground to a required depth of 20cms.Removing & conveying unwanted stuff, rubbish to the required distance as directed. Filling the Excavated area with fresh garden soil &F.Y. Manure in 3:1 proportion to a height of 20 cms. Mixing, levelling, watering the same previous night. Planting suitable ground covers as directed in staggering pattern, distance between two rows 25 cms., watering & maintaining till well established ( Pune D. S. R . 2017-18 Garden Horticulture Part - 3, I. No. 14)
10
-
-
... More
Maintenance of garden in all respect for keeping gardening in good condition such as weeding cleaning, watering, cutting gapfilling manuaring cutting (lawn, hedged, trees, flowers etc and composting, preperation of bed plantation, trees, shrubs ground covers, flowerbed, lawn etc with toilet washing and cleaning for one month. ( Pune D. S. R . 2017-18 Garden Dept. Maintenance Part - 10, I. No. 1)
127.2
-
-
... More
B) ELECTROMECHANIC WORK AND ELECTRICAL
-
-
-
... More
THERMAL INSULATION WORK
-
-
-
... More
INSULATED PANEL Supply and Erection as per General Technical Specifications , for walls-80 mm thick PIR panels,Density: 40 ±2kg /m3 0.5 mm thick Precoated /prepainted G.S. Sheet (min. 180 GSM) on both sides with polyester coating (thickness: 20~25 micron)
875
-
-
... More
INSULATED PANEL Supply and Erection as per General Technical Specifications , for walls-100 mm thick PIR panels,Density: 40 ±2kg /m3 0.5 mm thick Precoated /prepainted G.S. Sheet (min. 180 GSM) on both sides with polyester coating (thickness: 20~25 micron)
365
-
-
... More
INSULATED PANEL Supply and Erection as per General Technical Specifications, for ceiling-60 mm thick PIR panels, Density: 40 ±2kg /m3 0.5 mm thick Precoated /prepainted G.S. Sheet (min. 180 GSM) on both sides with polyester coating (thickness: 20~25 micron) Ceiling support system including supports for hanging/fixing ceiling structure from the roof/slab level to be included. This structure shall be ensured to be with complete thermal break and should avoid metal connection between inside and outside.
1400
-
-
... More
INSULATED PANEL Supply and Erection as per General Technical Specifications, for ceiling-100 mm thick PIR panels, Density: 40 ±2kg /m3 , 0.5 mm thick Precoated /prepaintedG.S. Sheet (min. 180 GSM) on both sides with polyester coating (thickness: 20~25 micron) Ceiling support system including supports for hanging/fixing ceiling structure from the roof/slab level to be included. This structure shall be ensured to be with complete thermal break and should avoid metal connection between inside and outside. Additional PIR filled hat section of minimum 50 mm thicnkess beyond any metal member of the support should be considered if only metal 'T' is being considered for ceiling panel support.
255
-
-
... More
INSULATED FLOOR Supply and Erection as per General Technical Specifications Floor 100 mm XPS (in two layers), min 30 kg/cu.m density. Rate for floor insulation to include supply and erection of all ancilliaries including polythene vapour barrier & two ply tarfelt as per specifications and bituminous primer, bitumin / bituminous cold compound for proper adhesion to surfaces.
250
-
-
... More
Supply & Fixing of 6~9 mm thick EPDM / Nitrile rubber on RCC slab / brick walls with suitable CPRX compound adhesive over which the insulated panels shall be fixed tightly with Nylon / FRP / Steel reinforced Nylon bolts.The bolt heads on the panels shall be covered with hat runners filled with PUF insulation as per standard practice.
10
-
-
... More
Supply & fixing of of Al foil min. 50 micron on RCC slab / brick walls with suitable CPRX compound adhesive / bitumen.
10
-
-
... More
Ancillary Materials and Services - Flashings for Internal and external wall-ceiling joints and wall-wall joints as applicable or as may be required for doors or other openings. The layout showing the chamber dimensions and height is enclosed for ready reference. The flashings should be atleast 50mm x 50 mm or larger sizes with adequate overlap over any given panel-panel joint (Precoated G.S. Sheet, minimum 0.5 mm thick)
1
-
-
... More
Ancillary Materials and Services - Silicon / Polyeurathene sealant for sealing the gaps between panels and the external / internal face of the insulation panels and any other location as may be deemed suitable for proper insulation panel erection system as applicable.
1
-
-
... More
Ancillary Materials and Services - PUF/PIR chemical, adhesives,/ tapes / plastic caps / screws etc reqd for onsite application, as may be necessary for a complete and foolproof insulation job.
1
-
-
... More
Ancillary Materials and Services -SITC of Pressure relief ports suitable for mounting on insulated panels of various thicknesses (60 mm to 100 mm) with internal heaters for room temperatures ranging from 25 deg C to (-) 10 deg C. (Fermond Soupape 2220 -Valve /Equivalent)- 1 no for each cold storage chamber.
2
-
-
... More
Ancillary Materials and Services - Making & finishing of cut outs for doors, pipes, cables, pressure ports, ventilatio grills/ diffusers etc as per requirement at site. Finishing would include filling with PUF/PIR & PUF/PIR foam of required density and covering with pre - coated G.I.sheet from both side of the panels to give aesthetically neat joint acceptable to Consultants / Owners. This should also include any additional Silicon sealent or any other material as required.
1
-
-
... More
INSULATED DOORS AND DOCK SOLUTION
-
-
-
... More
Precooling Chamber 1 Staging cold room 1,2, Packhouse to ante-room Manual Sliding type 1500 mm x 2700 mm ht x min. 80 mm thick PIR , manual type
Providing & fixing of Insulated sliding doors (suitable for fitting on panel structure) of clear opening size & insulation thicknesses as mentioned and specifications as per General technical specifications (GTS). The doors shall be manual single leaf sliding with 0.6 mm thick SS-304 sheet or pre-coated extruded Aluminium of required thickness main frame. The door leaf shall have 0.5 mm thick PCGI sheet with min 180 GSM galvanising / S.S sheet cladding on both sides with PIR foam filled In-situ and with a density 40 ± 2 Kg/m3 (insulation thicknesses as mentioned).0.60mm thick PCGI sheet flashing to protect and reinforce the cut out opening in panel wall to be included in the cost.
The sliding mechanism should be sturdy and smooth in operation complete with rail, runners, sill on the bottom etc. Rail shall be made of heavy duty aluminium alloy / SS with 45º drop & with polyethylene roller / special grade nylon arrangement runner system. The rail shall be provided with canopy / cover of 1.2 mm thick PCGI / Extruded Aluminium of required thickness. Lock & key to be provided for door
The doors shall have easily replaceable EPDM gaskets to ensure perfect hermetic sealing .
4
-
-
... More
For Ante-room to dispatch dock, receiving area to packhouse (fresh), Receiving area to holding, Receiving area to packhouse (dehydration), Dry storage FG, Packing room, Holding to Packhouse (Fresh) Insulated Doors -Swing type with double shutter 2000 mm x 2700 mm ht x min 44 mm thick PIR /PUF
Providing & fixing of Insulated doors (suitable for fitting on panel /Civil wall structure) mounting of clear opening size & insulation thicknesses as mentioned and specifications as per General technical specifications (GTS). Minor modification in door ht during project execution stage is acceptable with prior approval.
The doors shall be manually operated double leaf swing type with 1.25 mm thick SS-304 sheet or pre-coated extruded Aluminium of required thickness main frame.Any other material for door frame may be considered on case to case basis. The door leaf shall have 0.6 mm thick PCGI sheet with min 180 GSM galvanising / S.S sheet cladding on both sides with PIR/PUF foam filled In-situ and with a density 40 ± 2 Kg/m3 (insulation thicknesses as mentioned).Viewing window on each door leaf shall be provided. Lock & key, Door clousure, drop seal & conselaed tower bolt to be provided.
The rate shall include all minor accessories not specifically mentioned in the technical specification, but essential for the completeness of the work.
7
-
-
... More
For Packing material store packhouse area (Fresh) Insulated Doors -Swing type with double shutter 2000 mm x 2100 mm ht x min 44 mm thick PIR /PUF
Providing & fixing of Insulated doors (suitable for fitting on panel / civil structure) mounting of clear opening size & insulation thicknesses as mentioned and specifications as per General technical specifications (GTS). The doors shall be manually operated double leaf swing type with 1.25 mm thick SS-304 sheet or pre-coated extruded Aluminium of required thickness main frame.Any other material for door frame may be considered on case to case basis. The door leaf shall have 0.6 mm thick PCGI sheet with min 180 GSM galvanising / S.S sheet cladding on both sides with PIR/PUF foam filled In-situ and with a density 40 ± 2 Kg/m3 (insulation thicknesses as mentioned).Viewing window on each door leaf shall be provided.
Lock & key, Door clousure, drop seal & conselaed tower bolt to be provided. The rate shall include all minor accessories not specifically mentioned in the technical specification, but essential for the completeness of the work.
1
-
-
... More
For Lab Insulated Doors - Swing type with single leaf 1000 mm x 2000 mm ht x min 44 mm thick PIR /PUF
Providing & fixing of Insulated doors (suitable for fitting on panel /civil structure) mounting of clear opening size & insulation thicknesses as mentioned and specifications as per General technical specifications (GTS). The doors shall be manually operated single leaf swing type with 1.25 mm thick SS-304 sheet or pre-coated extruded Aluminium of required thickness main frame.Any other material for door frame may be considered on case to case basis. The door leaf shall have 0.6 mm thick PCGI sheet with min 180 GSM galvanising / S.S sheet cladding on both sides with PIR/PUF foam filled In-situ and with a density 40 ± 2 Kg/m3 (insulation thicknesses as mentioned).Viewing window shall be provided.
The rate shall include all minor accessories not specifically mentioned in the technical specification, but essential for the completeness of the work.
2
-
-
... More
Emergency Exit Fire Doors
Providing & fixing of hollow metal pressed steel FRD Doors made of 18 gauge frames of cross section100X 50& 40mm thk. Flush type door shutters made of 20 gauge sheet with vertical & horizontal channel stiffeners with Min Wool Insulation of suitable density, with2HRS Fire rated As per BS 476 / IS 3614 (With 4 nos. heavy duty SS ball bearing hinges (welded to hinge jams).With first class workmanship & alignment with a Powder coating finish.Accessories to be included are heavy duty door closer Dorma/ eqvt make, SS D Type Handle 600mm long Make Dorma/ eqvt, Dead Lock With Cylinder Make Dorma/eqvt, Vision Panel With Tuff Glass 200 X 300mm, Tower Bolt , Panic Bar & trim from inside etc as may be required. Color of the door shall be as approved by owners/ architects.
Clear opening Size 1200 mm x 2000 mm ht
4
-
-
... More
DOCK DOOR SITC of Dock door, vertically moving with motorized movement. The shutter be made of pre-coated steel sandwich panels 40mm thick injected with PIR / PUF foam (density 40 ± 2 Kg/m3) & clear opening size as specified. Steel external / internal facing shall have white paint (RAL9002)/ Equivalent. However, Door Colour shade shall be discussed & finalised in consultation with owner & Architect.Double glazing vision panels are made from high quality engineered plastic frame in transparent scratch resistant acrylic or equivalent material shall be provided. The bottom of the door has rubber gasket to seal from bottom without any gap. The vertical moving track shall be U shaped made of 2.5 mm G.S. Sheets. The dock door shall have excellent Resistance to water penetration & resistance to wind load and water permeability properties.
The dock door shall have lift system (Normal Lift / High Lift / Vertical Lift) as per the site condition.Safety features like spring break safety device, slack cable safety device, cable break safety device, bottom safety edge etc shall be provided. These overhead doors will be operated by electric motor and shall have provision of operating manually by using a chain hoist. The electrical motor used shall be high quality & durable motor (CE marked) with IP54 (min) protection Class. Accessories for easy operation doors including Push button /Remote Control/ Pull cord shall be provided.
Clear opening size: 2400 mm width x 2700 mm height
1
-
-
... More
Dock Shelter
SITC of Retractable type suitable for heavy duty operations for door opening size as above. Polyster type fabric with PVC coating curtain.
1
-
-
... More
DOCK LEVELER SITC of dock leveller, Designed for Hydraulic operation in accordance of EN:1398 in steel construction as per General technical specification ,Acceptable makes: Gandhi Automation/ Metaflex / Hormann / Eqvt
Size : 2000mm width and 2500mm deep, Capacity: 6 MT dynamic loading
Lift height min 400 mm from centre level, upwards & downwards., Main cylinders-2 nos,1- Hinged leap cylinder, All controls, control panels, controller with IP65 protection housing, power and control cabling, pair of Plinth protection high density EPDM bumpers, two nos for each as required for full operation to be included.
1
-
-
... More
Dock House Structure Supply & installation with suitable provision to install Dock Leveler, Dock Shelter & Motorised
Overhead Door
Approx. Door House Size: Width 3400mm x Length 2600mm x Height 5450mm Self-contained loading bay to be installed in front of the dispatch dock
The design,size and layout of the dock house shall be adapted to suit the requirements of the site.
Steel dock comprising of supporting legs.,Collapsible structure for considerable long distance volume saving in the transport. Easy and fast to reposition in case of future.MS Chequered Plate for Platform
,MS pipes for support structure, Both sides, top front & roof covered with precoated 0.5mm thick Corrugated sheet, PPGI colour coated gutter with fitting for drainage system, Finishing of MS pipes with one coat of grey epoxy primer by spray. All requirments for ensuring that the dock house structure does not have leakages during rains shall be ensured including providing of flashings on the building envolope (civil/PEB/other) & polyurathene based or similar waterproofing sealant for complete sealing. The same shall also be included in the costing of the item.
1
-
-
... More
Strip Curtains SITC of strip curtains made of 3 mm thick transparent PVC sheet strips with 40 / 50 mm overlapping and supporting clamps. The strips shall have free swinging motion. The strip material shall be suitable for the specified low temperature application to ensure that it remains soft even at the lowest operating temperature
-
-
-
... More
For Precooling Chamber 1 Staging cold room 1,2, Packhouse to ante-room Manual Sliding type 1500 mm x 2700 mm ht ( )
4
-
-
... More
For Ante-room to dispatch dock Manual Sliding type 2000 mm x 2700 mm ht ( )
1
-
-
... More
Refrigeration System for Pre-cooling chamber, Staging cold rooms, ante-room
-
-
-
... More
AIR COOLED CONDENSING UNITS For Pre-Cooling chamber 1 (General details as per PART – II - REFRIGERATION SYSTEM of GTS) Complete with Reputed approved make semi hermatic reciprocating compressor working on R134A, Air cooled condenser, Liquid receiver,Oil separator with check valve in discharge line, Base frame for mounting, H.P. / L.P.switches, Suction accumulator Vibration eliminator, Oil pr switch and pressure gauges , Sturdy MS Stand with two coats of primer and two coats of oil paint of approved colour etc. as required.
Condenser coil to be designed for 10 deg C TD between ambient temperature and condensing temperature.
Other Technical specifications as per General Technical specifications as mentioned in the tender. The capacity and other details shall be as follows :
For Pre-Cooling chamber 1 ( 2 nos for each ACU): Capacity: 26 KW
DesignTemperature: 3 deg. C evap. Maximum ambient Temperature: 42 deg C ambient
Minimum fin spacing: 2 mm
Condensing unit inlet air pre-cooling system: to be included
There shall be provision to run each condensing unit separately especially in cases where product qty is low. Related controls (PLC if needed), cabling, control panel, etc shall be included in the cost. This shoud be possible in Automode as well as manual mode. ( )
2
-
-
... More
AIR COOLED CONDENSING UNITS For staging cold room 1 (General details as per PART – II - REFRIGERATION SYSTEM of GTS) Complete with Reputed approved make semi hermatic reciprocating compressor working on R134A, Air cooled condenser, Liquid receiver,Oil separator with check valve in discharge line, Base frame for mounting, H.P. / L.P.switches, Suction accumulator Vibration eliminator, Oil pr switch and pressure gauges
Condenser coil to be designed for 10 deg C TD between ambient temperature and condensing temperature.
Other Technical specifications as per General Technical specifications as mentioned in the tender. The capacity and other details shall be as follows :
For staging cold room 1,2 Capacity: 23.5 KW
DesignTemperature: 3 deg. C evap. Maximum ambient Temperature: 42 deg C ambient
Minimum fin spacing: 2 mm
Condensing unit inlet air pre-cooling system: to be included ( )
1
-
-
... More
AIR COOLED CONDENSING UNITS For Ante room (General details as per PART – II - REFRIGERATION SYSTEM of GTS) Complete with Reputed approved make scroll compressor working on R134A , Air cooled condenser, Liquid receiver,Oil separator with check valve in discharge line 9if required) , Base frame for mounting, H.P. / L.P.switches, Suction accumulator Vibration eliminator, Oil pr switch, pressure gauges , Sturdy MS Stand with two coats of primer and two coats of oil paint of approved colour etc. as may be required.
Condenser coil to be designed for 10 deg C TD between ambient temperature and condensing temperature.
Other Technical specifications as per General Technical specifications as mentioned in the tender. The capacity and other details shall be as follows :
For Ante room in front of Pre-cooling Capacity: 11.5 KW
DesignTemperature: 5 deg. C evap. and +48 deg.C cond. Temp
Maximum ambient Temperature: 42 deg C ambient
Minimum fin spacing: 2 mm
Condensing unit inlet air pre-cooling system: to be included ( )
1
-
-
... More
AIR COOLING UNITS - Air Cooling Units for Pre-cooling chamber 1 (General details as per PART – II - REFRIGERATION SYSTEM of GTS) Technical specifications as per General Technical Specifications as mentioned in the tender. The capacity and other details shall be as follows : Make: Star coolers / GEA / Alfa Luve / Guentner / Thermofin, Model: To be Mentioned
Type of Unit -Single / Twin: Twin coil type,Type of Refrigerant feed: HFC - DX
Capacity - kW: 51, Evap. Temp. & TD ‘C’: 3 °C / 4 °C
Coil / Fin MOC: Cu / Al, Fin spacing -mm: 6 mm
Fin type: Plate, Finned coil length -m: To be Mentioned
Total fan capacity of each unit– CMH: 52500, External sp. Wg, mm: 25
No of Fans/Unit: 3/4, Fan Motor -kW each: To be Mentioned
Air throw -m: 8 m, Drain pan insulation: Required
Drain pan heating: Not required
Type of Defrosting: off cycle (provision to be kept for adding electrical defrost at later stage)Fan peripheral heating: Not required
Suitable Supporting structure from primary support at roof level or mounting stand (if supporting from floor level) to be considered in the costing as well.
Product Covering Flap - Suitable product covering flap made of PVC sheet / EQVT sturdy material to be mounted on the unit above the fan(s) to ensure proper air flow through the produce. There shall be suitable reinforcement inside the flap as well as at the ends for supporting the Flap. Costing for the same also shall be included.
It must be noted that this scheme is considered as a part of a combined pre-cooling system which will have an airtight plenum created between the wall panel and the area around the ACU as defined above. So while the insulated panel will be billed as per the the insulation panel rates, the cutting for the panel, the flashings, etc as needed for the pre-cooling unit arrangement should be considered while quoting the cost of panels. ( )
1
-
-
... More
AIR COOLING UNITS - Air Cooling Units for Staging cold room 1 (General details as per PART – II - REFRIGERATION SYSTEM of GTS) Technical specifications as per General Technical Specifications as mentioned in the tender. The capacity and other details shall be as follows : Make: Star coolers / GEA / Alfa Luve / Guentner / Thermofin / Type of Unit -Single / Twin: Single coil type
Type of Refrigerant feed: HFC - DX
Capacity - kW: 23.5
Evap. Temp. & TD ‘C’: 3 °C / 4 °C
Coil / Fin MOC: Cu / Al
Fin spacing -mm: 6 mm
Fin type: Plate
Finned coil length -m: To be Mentioned
Total fan capacity of each unit– CMH: 27000
External sp. Wg, mm: 5
No of Fans/Unit: 2/3
Fan Motor -kW each: To be Mentioned
Air throw -m: 10 m
Drain pan insulation: Required
Drain pan heating: Not required
Type of Defrosting: Offcycle (provision to be kept for adding electrical defrost at later stage)
Fan peripheral heating: Not required
Suitable Supporting structure from primary support at roof level or mounting stand (if supporting from floor level) to be considered in the costing as well. ( )
1
-
-
... More
AIR COOLING UNITS - Air Cooling Units for Ante room (General details as per PART – II - REFRIGERATION SYSTEM of GTS) Technical specifications as per General Technical Specifications as mentioned in the tender. The capacity and other details shall be as follows : Make: Star coolers / GEA / Alfa Luve / Guentner / Thermofin , Model: To be Mentioned
Type of Unit -Single / Twin: Single coil type
Type of Refrigerant feed: HFC - DX
Capacity - kW: 11.5
Evap. Temp. & TD ‘C’: 5 °C / 10 °C
Coil / Fin MOC: Cu / Al
Fin spacing -mm: 4 mm
Fin type: Plate
Finned coil length -m: To be Mentioned
Total fan capacity of each unit– CMH: 6500
External sp. Wg, mm: 7
No of Fans/Unit: 2/3
Fan Motor -kW each: To be Mentioned
Air throw -m: 15 m
Drain pan insulation: Required
Drain pan heating: Not required
Type of Defrosting: offcycle
Fan peripheral heating: Not required
Suitable Supporting structure from primary support at roof level to be considered in the costing as well. ( )
1
-
-
... More
Refrigeration Piping, Fittings & Valves (General details as per PART – II- REFRIGERATION SYSTEM of GTS) The piping shall be of refrigeration quality The piping shall be of refrigeration quality seamless copper tubes and the valves shall be brassomatic / Henry or equivalent make. The piping shall be included accessories such as filter, drier, sight glass, heat exchanger, suction lineaccumulator etc. as per P & I diagram approved by Consultant. Adequate number of supports shall be included. The piping shall be supported at distances of maximum 1.5 m from each other with suitably placed GS threaded rods of minimum 6 mm thickness when outside the chamber and piping shall be run on cable trays of size suitable to fit the pipes including insulation. Common cable trays can be considered depending on the suitability at site, however the same shall be acceptable to the consultant / owner. Overall, the piping execution shall ensure proper workmanship and a neat and tidy work is expected with straight horizontal and vertical lines and proper supporting. Under no circumstances shall any additional charges be demanded by the contractor for ensuring the same.
The suction and discharge lines shall be designed for a maximum pressure drop corresponding to 1.1 deg. C drop in saturated evaporating and condensing temperatures. The liquid line shall be designed for maximum pressure drop corresponding to a drop 0.5 to 1 deg. C in saturation temperature. The piping shall be designed with proper slope in the direction of Refrigerant flow and to ensure proper oil return to the compressor and should be installed with adequate supports to avoid undue vibration. The piping should be thoroughly cleaned as per standard practice prior to installation.
Refrigeration piping,fittings,valves,interconnecting condensing & evaporator unit complete with standard controls & accessories, supports as may be required shall be included in cost.layout drawing showing proposed location of condesing units is atttached for your reference. ( )
1
-
-
... More
Suction line insulation (General details as per PART – II- REFRIGERATION SYSTEM of GTS) Suction line insulation with EPDM/ XLPE/Equivalent insulation with minimum 28G Aluminium foil Clading in the covered areas and Weatherproof Clading in areas exposed to sunlight and is uncovered ; e.g. Woven glass cloth with epoxy coating or Armacheck GC/equivalent Clading with suitable fittings and Adhesives.Alternatively,Fevicol Weather protect coat applied as per manufacturers recommendation may be used for entire insulation protection. Insulation supports shall be half round or full round heavy duty PVC pipe sections of relevant size which shall be atleast 150 mm in length and shall be placed below every support (if necessary). This is essentially ensuring that the insulation compression at the support is at the minimum. ( )
1
-
-
... More
Drain piping with rigid U-PVC pipe from A.C. units to to suitable drain point complete with 'U' Traps for each cold room and supports.Drain lines (inside the chambers) to have 10 mm EPDM / Eqvt. insulation with factory backed Aluminium foil.Individiual Drain outlet line from ACU pipe size shall be same as the drain outlet of ACU and further the header shall be at least one size higher than the drain outlet connection size. Further, higher sizes may be considered as per the consultants/owner's recommendation ( )
1
-
-
... More
Controls and Instruments
(a) Thermostatic expansion valves for each ACUs
(b) Digital temperature indicator cum controllers (0 to 50 deg. C range) (c) Liquid line solenoid valves, DANFOSS / SPORLAN /EQVT make (d) Digital temperature indicator (minus 20 to 50 deg. C range), for A.C. units to be placed outside the each cold rooms in ante-room area.
(e) Digital RH indicator (0 to 100 % range) for A.C. units to be placed outside the each cold rooms in ante-room area. Only for pre-cooling ,staging cold room ACUs ( )
1
-
-
... More
First charge refrigeration gas and oil etc. as required upto commissioning and final handling over of plant. ( )
1
-
-
... More
Painting of equipment/piping / piping supports etc. as per standard colour codes with initial coat of red oxide primer and two coats of synthetic enamel paint . ( )
1
-
-
... More
Humidification system for pre-cooling chambers complete with Industrial type Ultrasonic Humidifier, U-PVC water piping from the tanks to humidifier unit, fitting ,valves, atomizer nozzles, solenoid valves with strainers and humidistats etc. to maintain the relative humidity in the design range for Pre-Cooling Chambers. Also consider heavy duty PVC piping for air delivery into the cooling area for a release of humidified air into the main air stream, at atleast 1 m distance from the partition panel inside the cooling chamber area.
Humidifier Capacity: 5 Lit/hr.
1
-
-
... More
Electrical work for Refrigeration System (General details as per PART – II A- REFRIGERATION SYSTEM of GTS)
Electrical control panel shall be manufactured as per specifications menioned in GTS and approved GA drawings.
The Panel shall be comprising of following: a) Suitable Incomer of ACB / MCCB / MCB / RCBO of required rating and as per enclosed specification and approval. b) All Suitable rating MCB's, MPCB's, RCBO's, starters, relays, etc for various motors as used in the equipments shall be selected as per type 2 co ordination chart provided by the manufacturer. c) MCBs for control circuit d) Each starter shall be provided with facility for remote Start/Stop operation.
This panel shall be located in the plant room (on terrace level) and shal have weather proof enclosure with suitable MCB's/RCCB's/RCBO's near the condensing unit. Job includes Electrical Power cabling (armoured) to all the outgoing feeders along with PVC medium duty Conduit/ pregalvanised Cable tray's, etc as per requirement and power cabling shall be as per specifications given in GTS.
Control wiring with PVC insulated copper conductor with conduits as required for the refrigeration and other systems as defined here.
Local Protection through MCB's/RCCB's/RCBO's for A.C. units, fan motors and other remotely located motors shall be part of the job.The Job shall also include earthing for control panel and various motors etc. using required sizes earthing conductors using GI/Cu earthing strips or Cu Conductors, all as per IS.The control panel shall have provision for interlocking of various equipment as per standard practice. Only one incomer to refrigeration panel is considered from main electrical panel. Further distribution has to be considered from the refrigeration panel only. ( )
1
-
-
... More
Miscellaneous Items
a) Vibration isolators for condensing units, supporting rods / Frame for A.C. Units with insulation, steel structure for mouting condensing units etc. as may be required b) Minor structural openings in walls / panels etc for piping, cabling etc. and finishing. c) 500 lit water tank along with water pump as necessary for lifting water to the tank or lifting water from the tank depending on tank location ,UPVC piping, fittings,valves etc as may be required for condenser inlet air-precooling system. Condenser air pre-cooling system shall have automatic operation with water line sonenoid valves for each individual condensing unit and there shall be an interlock with the conensing unit start/stop as well as the ambiend air temperature wherein the air precooling system starts only after the ambient air temperature crosses 33 deg C and switches off when ambient goes beloe 33 deg C. ( )
1
-
-
... More
Charges for Installation, Testing and Commissioning
Installation, testing and commissioning of all above equipment / material as per the system requirement. All tools and tackles, welding machines, welding rods and gases etc. required for fabrication, erection, testing and commissioning shall be arranged by the contractor at his cost. The plant shall be erected, tested, commissioned as per Consultant's approved drawings / specifications and instructions to his and Employer's satisfaction. The refrigeration system shall be pressure tested and evacuated as per standard practice before charging the refrigerant. The water lines shall also be pressure tested as per standard practice. The plant shall be run for a period of three days after commoissioning by the contractor, to assess the plant performance. The contractor shall provide 3 hard copies of operation & maintenance for the plant along with as built drawings. The contractor shall also arrange the training of the operating staff for proper operation & maintenance of the plant (included in above rates) ( )
1
-
-
... More
VENTILATION SYSTEM FOR PACKHOUSE AND OTHER AREAS
-
-
-
... More
Single stage air cooling system as per the general technical specifications
For Fresh Green chilli packhouse
Supply Air -- Single stage Evaporative cooling unit.
SITC of single stage evaporative air cooling units with double skin sheet metal construction 25+/-2 mm thick, CFC free PUF injected (Density 40+/-2 Kg/Cum).The unit shall have DIDW forward/backward curved blowers ,VFD compatible IE2 squirrel cage induction motor, heavy duty GSS base, the evaporative cooling pads minimum 100 mm thick (Munters / Eqvt make) designed for max 150 m/min face velocity, FRP/SS water tank with suitable arrangement for maintaining required water level., water circulating pump with associated UPVC piping, fittings, valves etc , air pre-filters Removable cleanable Al / HDP filter suitable for 90% efficiency upto 20 microns., vibration isolation pads,canvass made of heavy cloth with gaskets to join unit outlet wiht supply air duct, volume control damper etc. Units supplied should be dismantle able type from various sections to suit site conditions & installation.
Cap. : 17000 cmh of 15 mm wg.exteranl static pressure.
1
-
-
... More
Single stage air cooling system as per the general technical specifications
For Chilli dehydration packhouse
Supply Air -- Single stage Evaporative cooling unit.
SITC of single stage evaporative air cooling units with double skin sheet metal construction 25+/-2 mm thick, CFC free PUF injected (Density 40+/-2 Kg/Cum).The unit shall have DIDW forward/backward curved blowers ,VFD compatible IE2 squirrel cage induction motor, heavy duty GSS base, the evaporative cooling pads minimum 100 mm thick (Munters / Eqvt make) designed for max 150 m/min face velocity, FRP/SS water tank with suitable arrangement for maintaining required water level., water circulating pump with associated UPVC piping, fittings, valves etc , air pre-filters Removable cleanable Al / HDP filter suitable for 90% efficiency upto 20 microns., vibration isolation pads,canvass made of heavy cloth with gaskets to join unit outlet wiht supply air duct, volume control damper etc. Units supplied should be dismantle able type from various sections to suit site conditions & installation.
Cap. :25000 cmh of 15 mm wg.exteranl static pressure. ( )
2
-
-
... More
Exhaust Fans For Processing Hall ,for single stage evaporative air cooling system as per the capacity specified below and complete with (a) Fan with direct coupled motor
(b) Mounting ring and brackets (c') Gravity louvers
(d) Bird screen Cap. : 450mm dia, 6000 cmh of 2.5 mm wg.sp.
3 nos for fresh packhouse + 8 nos for dehydration packhouse ( )
11
-
-
... More
Air Ducting for ventilation system (round /square) with GI sheets as per IS 655 standard duly painted as per the shade required by the architect and insulated with 19 mm EPDM / Nitrile rubber / XLPE insulation with factory backed aluminium foil applied using suitable self adhesive. All necessary supports, etc to be included in the rate.
20 gauge (1.0 mm) ( )
10
-
-
... More
Air Ducting for ventilation system (round /square) with GI sheets as per IS 655 standard duly painted as per the shade required by the architect and insulated with 19 mm EPDM / Nitrile rubber / XLPE insulation with factory backed aluminium foil applied using suitable self adhesive. All necessary supports, etc to be included in the rate.
22 gauge (0.8 mm) ( )
210
-
-
... More
Air Ducting for ventilation system (round /square)with GI sheets as per IS 655 standard duly painted as per the shade required by the architect and insulated with 19 mm EPDM / Nitrile rubber / XLPE insulation with factory backed aluminium foil applied using suitable self adhesive. All necessary supports, etc to be included in the rate. 24 gauge (0.63 mm) ( )
620
-
-
... More
Supply and installation of supply air linear grills / diffuser in aluminium powder coated construction with shade as required by architect along with matt finish aluminium dampers for sizes as may be required. ( )
60
-
-
... More
Supplying, Fixing,testing and commissioning of fire dampers in supply air duct/main branch and return air path as and where required of required sizes i/c control wiring,the damper shall be motorized and spring return so as to close the damper in the event of power failure automatically and open the same in case of power being restored. The spring return action shall be inbuilt mechanism and not externally mounted. The damper shall also be closed in the event of fire signal complete as required and as per specifications. ( )
3.5
-
-
... More
Supply, installation, testing and commissioning of manually operated, opposed blade, duct mounted, flanged volume control dampers of required sizes in GI construction with operating mechanism, mounting arrangement, rubber refrigerant kits etc. complete ( )
3.5
-
-
... More
Toilets - Exhaust Fans - approx 230 mm dia
as per the capacity specified below and complete with
(a) Fan with direct coupled motor
(b) Mounting ring and brackets
(c) Gravity louvers (d) Bird screen
Necessary electrical cabling etc shall be included in the cost. ( )
4
-
-
... More
Exhaust Fans- Packing Material Store & crate storage
as per the capacity specified below and complete with
(a) Fan with direct coupled motor
(b) Mounting ring and brackets
(c) Gravity louvers (d) Bird screen
Cap. : 4500 cmh Necessary electrical cabling etc shall be included in the cost. ( )
2
-
-
... More
Electrical work for Ventilation System - for Ventilation system (Evaporative Cooling Units)
(General details as per - REFRIGERATION SYSTEM of GTS)
Electrical control panel shall be manufactured as per specifications menioned in GTS and approved GA drawings.
The Panel shall be comprising of following: a) Suitable Incomer of ACB / MCCB / MCB / RCBO of required rating and as per enclosed specification and approval. b) All Suitable rating MCB's, MPCB's, RCBO's, starters, relays, etc for various motors as used in the equipment shall be selected as per type 2 co ordination chart provided by the manufacturer. c) MCBs for control circuit d) Each starter shall be provided with facility for remote Start/Stop operation. This panel shall be located on terrace and there shall be weather proof enclosure with suitable MCB's/RCCB's/RCBO's near the condensing unit. Job includes Electrical Power cabling (armoured) to all the outgoing feeders along with PVC medium duty Conduit/ pregalvanised Cable tray's, etc as per requirement and power cabling shall be as per specifications given in GTS.
Control wiring with PVC insulated copper conductor with conduits as required for the systems as defined here.
Local Protection through MCB's/RCCB's/RCBO's for A.C. units, fan motors and other remotely located motors shall be part of the job.
The Job shall also include earthing for control panel and various motors etc. using required sizes earthing conductors using GI/Cu earthing strips or Cu Conductors, all as per IS.
The control panel shall have provision for interlocking of various equipment as per standard practice. ( )
1
-
-
... More
VENTILATION SYSTEM - Air Curtains for Pre-cooling & staging cold room
Supply & fixing of industrial type air curtains suitable for door clear opening size as mentioned and specifications given below.
The Air Curtains shall incorporate centrifugal blowers made of SS / Aluminium with sealed ball bearings. The blowers shall be statistically and dynamically balanced. The motor shall be of standard make suitable for operation on single phase or three phase AC supply. The casing shall have a sturdy construction in SS304 finish. Adjustable louvers shall be provided for streamlining the air delivery.Air velocity to be in the range of 12 to 15 m/s. Proximity sensor with controller switch (limit switch) to be provided to ensure that the air curtain operates only when the door is open.
Necessary fixing arrangement including sturdy brackets or base frame to bring the air curtain to the required level for proper air flow shall also be included in the cost.
Necessary cabling in casing-capping / conduits as required by owners from the switch points provided near the door shall also be included in the costing.Necessary cabling in casing-capping / conduits as required by architects/owners from the switch points provided near the door shall also be included in the costing.
Suitable for Clear opening size: 1500 mm x 2700 mm ht ( )
3
-
-
... More
VENTILATION SYSTEM - Air Curtains for ante room to dispatch dock , receiving area
Supply & fixing of industrial type air curtains suitable for door clear opening size as mentioned and specifications given below.
The Air Curtains shall incorporate centrifugal blowers made of SS / Aluminium with sealed ball bearings. The blowers shall be statistically and dynamically balanced. The motor shall be of standard make suitable for operation on single phase or three phase AC supply. The casing shall have a sturdy construction in SS304 finish. Adjustable louvers shall be provided for streamlining the air delivery.Air velocity to be in the range of 12 to 15 m/s. Proximity sensor with controller switch (limit switch) to be provided to ensure that the air curtain operates only when the door is open.
Necessary fixing arrangement including sturdy brackets or base frame to bring the air curtain to the required level for proper air flow shall also be included in the cost.
Necessary cabling in casing-capping / conduits as required by owners from the switch points provided near the door shall also be included in the costing.Necessary cabling in casing-capping / conduits as required by architects/owners from the switch points provided near the door shall also be included in the costing.
Suitable for Clear opening size: 2000 mm x 2700 mm ht
ante room to dispatch dock-1 no, receiving area-3 nos ( )
3
-
-
... More
VENTILATION SYSTEM - Air Curtains for waste disposal & entry door from staricase
Supply & fixing of industrial type air curtains suitable for door clear opening size as mentioned and specifications given below.
The Air Curtains shall incorporate centrifugal blowers made of SS / Aluminium with sealed ball bearings. The blowers shall be statistically and dynamically balanced. The motor shall be of standard make suitable for operation on single phase or three phase AC supply. The casing shall have a sturdy construction in SS304 finish. Adjustable louvers shall be provided for streamlining the air delivery.Air velocity to be in the range of 12 to 15 m/s. Proximity sensor with controller switch (limit switch) to be provided to ensure that the air curtain operates only when the door is open.
Necessary fixing arrangement including sturdy brackets or base frame to bring the air curtain to the required level for proper air flow shall also be included in the cost.
Necessary cabling in casing-capping / conduits as required by owners from the switch points provided near the door shall also be included in the costing.Necessary cabling in casing-capping / conduits as required by architects/owners from the switch points provided near the door shall also be included in the costing.
Suitable for Clear opening size: 1500 mm x 2000 mm ht ( )
2
-
-
... More
VENTILATION SYSTEM - Air Curtains for change room entry
Supply & fixing of industrial type air curtains suitable for door clear opening size as mentioned and specifications given below.
The Air Curtains shall incorporate centrifugal blowers made of SS / Aluminium with sealed ball bearings. The blowers shall be statistically and dynamically balanced. The motor shall be of standard make suitable for operation on single phase or three phase AC supply. The casing shall have a sturdy construction in SS304 finish. Adjustable louvers shall be provided for streamlining the air delivery.Air velocity to be in the range of 12 to 15 m/s. Proximity sensor with controller switch (limit switch) to be provided to ensure that the air curtain operates only when the door is open.
Necessary fixing arrangement including sturdy brackets or base frame to bring the air curtain to the required level for proper air flow shall also be included in the cost.
Necessary cabling in casing-capping / conduits as required by owners from the switch points provided near the door shall also be included in the costing.Necessary cabling in casing-capping / conduits as required by architects/owners from the switch points provided near the door shall also be included in the costing.
Suitable for Clear opening size: 1000 mm x 2000 mm ht
waste disposal ( )
2
-
-
... More
Grading Sorting Line for Green Chilies, Capacity: 1MT/hr
-
-
-
... More
Grading Sorting Conveyor M.O.C.: S.S.304.
Approx. Size: 1000 mm (width) x 7500 mm (length) x 1160 mm (Height).
Conveyor having divider for easily sort the fruits & vegetables.
Channels shall be made from sheet in 2 mm thickness.
S.S.304 structure of square tube.
It shall stand on leveling studs to provide (+/- 50 mm) leveling adjustment.
The inspection belt shall be of PVC food grade quality with white colour.
Electrical Drive: 2 H.P. geared motor. ( )
1
-
-
... More
Electrical control panel ,wiring etc
Panel body construct in SS 304.
Electrical panel contains V.F.D. for grading sorting conveyor. Electrical panel shall contain starter for all other motors with respective H.P., emergency stop button, on/off switch, RYB indicator etc.
Related power & control cabling from panel to individual motors, earthing etc shall be included in the cost. SS cable trays/ conduits, supports in SS construction shall also be considered.. ( )
1
-
-
... More
CARTON BOX PACKAGING TABLES Size: 1000 mm (W) x 2200 m (L) x 750 mm (Ht.)
SS top plate 1.5 mm thick [SS304]
SS square pipe size 40mm x 40 mm x 2mm thk
level pads shall be provided ( )
4
-
-
... More
Preparatory Line for Green Chilli Dehydration Capacity 1 Mt/hr
-
-
-
... More
Feed Elevator 1
Suitable for feeding of raw green Chilly on to the Conveyor
SS304 Frame with PP Modular belt, sprocket assly.
SS304 Feed Hopper / Disch Chute
Size: 600 mm wide x 4 Mtrs Lg
2 HP electric geared motor ( )
1
-
-
... More
Infeed Conveyor
Suitable for manual inspection of raw green Chilly SS304 Frame with PVC Food grade belt, pulley assly
SS304 side guide.
800 mm wide x 3 Mtrs Lg
1 HP electric geared motor ( )
1
-
-
... More
Feed Elevator 2
Suitable for feeding of raw green Chilly on to the Steam Removal M/c SS304 Frame with PP Modular belt, sprocket assly.
SS304 Feed Hopper / Disch Chute
600 mm wide x 4.5 Mtrs Lg
2 HP electric geared motor ( )
1
-
-
... More
Stem Removal M/c
Suitable for removal of stem from chilly. Consisting of feed hopper, rotating drum, cutting blade assly
1.2 Mtrs wide x 1.2 Mtrs Lg ( )
2
-
-
... More
Inspection Conveyor
Suitable for manual inspection of Steam removed green Chilly .
Auitable arrangement for transfer of product from stem removal machine to inspection conveyor also shall be considered under this item.
SS304 Frame with PVC Food grade belt, pulley assly
SS304 side guide.
800 mm wide x 5 Mtrs Lg
2 HP electric geared motor ( )
1
-
-
... More
Bubble Washer
SS304 construction tank with elevator, drain, overflow
PP Modular elevated belt in drive driven sprocket.
Air Blower with header, water circulation pump 1400 mm wide x 4.5 Mtrs Lg ( )
1
-
-
... More
Metal Detector
Suitable for detection of ferrous / non ferrous metal. The unit will be fixed at the discharge end of above conveyor. The equipment will be with Aperture size 600 mm x 150 mm sensitivity.
Sensitivity of 1.5 mm Ferrous, 2.0 mm Non Ferrous, 2.5 mm Stainless Steel.
300 mm wide x 0.9 Mtrs Lg ( )
1
-
-
... More
Slicer Capacity 1 MT/ hr
Cut size: adjustable for slicing of Chilly in 5 to 20 mm length
Rigid framework, feed hopper, cutting blade assly.
3HP electric motor ( )
1
-
-
... More
Batch type Heat Pump based Dehydration unit suitable for green chilli drying
SITC OF Heat Pump Food Dehydrator suitable for drying of green chili, Capacity 2 MT/ batch
Heat Pump:
• Number of Heat Pump: 2 No, Number of Compressor: 2 No/Heat Pump, Heat pump frame material SS-202 and inner contacted part SS-304, Refrigerant: R134a, PLC based controlling, All Fan with safety Guard
Drying Chamber:
• Drying chamber size(mm) (L x W x H): 8600 x 4400 x 2200 mm, Insulating Material of Panel: Polyurethane (PUF), PUF Panel Thickness: 80 mm, Inner Material of Chamber: SS 304 , Outer Material of Chamber: GIPP, Total Number of Door: 2 Nos
Trolley:
• Dimension: 670 x 870 x 1790 mm, No of Trolley: 36 Nos, No of tray per trolley: 24 Nos Trolley Material: SS 202
Tray:
• Outer Size of tray: 800 x 600 x 45 mm ( L x W x H ), Number of Trays: 864 Nos, Usable TOtal Tray Area: 414 sq. m, Material: Food Grade Plastic Power Supply:3 ph , 415 V
Heating capacity: 180 kW
Cooling capacity: 150 kW
Dehumidify capacity: 240 L/H
No of heat pump: 2 nos
Hot air flow: 96000 to 64000 m³/H ( )
2
-
-
... More
Pulveriser suitable for dried green chilli powder making, hammer mill
Capacity: 20 HP
SS304 Food Grade Machanism,
Recommand Motor 20 hp Three phase,
440V, 50 Hz, Production ~150 to 200 kg/Hr, 15
KW
Main body, rotor shaft, inlet hopper, catch plate, Hammer, grinding liner, screen, blower assembly, Cyclone Collector & Dust Collector, Machine to Cyclone & Dust Collector piping /ducting all inSS304
Flange Of Piping & Bend, Cyclone, Dust Collector, Blower, Leg for Cyclone Collector & Dust Collector, Motor & Machine Stand,Belt Guard in MS construction
V-belt & cotton bag to be provided ( )
1
-
-
... More
Vibro Sifter 36” With Motor suitable for dried green chilli powder
· MOC : Contact Part S.S 304 & Non- Contact Part M.S
· Size : 36” (3 Feet)
· Screen : Frame With Screen S.S 304
· Motor : 1 H.P. Three Phase
· Deck / DOM : S.S 304
· Base : M.S
· Buffing : Mirror
· Color : Auto Paint ( )
1
-
-
... More
Ribbon Blender
Contact Part S.S-304 And Non-Contact Part M.S
With Useful Volumetric Capacity Of 250liters, Total Volumetric capacity of 300 Ltr.App With Gear Box & 3 H.P Motor ( )
1
-
-
... More
Metal detector with conveyor
MOC: S.S.304
Size: Metal Detector Aperature Size- 500 mm (Width) x 75 mm
(Height) & Usable Aperture Size- 600 mm Width X 60 mm Height|
Sensitivity- 1.2 mm Ferrous, 1.5 mm Non-Ferrous & 2.0 mm S.S
Metals (Without Product Effect).|
Metal Detector- With gearedmotor & other assembly material,
Operating Voltage- 230 VAC, 1 Ph, 50 Hz,|
ON BOARD DISPLAY:|
DIGITAL VERSION- LCD BAR GRAPH, 08 Key Board, 20 Characteristic X
04 lines LCD Display, Printer Facility, PC Interface, Self-Test,
Password Protection, 100 Product Memory etc.|
Conveyor Size- 600 mm (Width) x 2500 mm (Long) x 800 mm (Feed
Height)|
Conveyor Systems- With 900 mm width PU Food graded conveyor
belt & gearedmotor|
Operating Voltage- 415 VAC, 3 Ph, 50 Hz ( )
1
-
-
... More
Electrical control panel ,wiring etc for equipments for Green Chilli Dehydration prepatory line & others
Panel body construct in SS 304.
Electrical panel shall contain starter for all motors with respective H.P., emergency stop button, on/off switch, RYB indicator etc.
VFDs shall be considered for inspection conveyors.
Related power & control cabling from panel to individual motors, earthing etc shall be included in the cost. SS cable trays/ conduits, supports in SS construction shall also be considered.. ( )
1
-
-
... More
Lab Equipments
-
-
-
... More
Horizontal laminar air flow, MOC- Outer MS Powder Coated & Inner SS , size: 1200*600*600, 1 kW, Labline /LABLINC / eqvt approved make ( )
1
-
-
... More
Autoclave , MOC- Inner & outer SS body , size: 450*600, 4kW (95 Lts), Labline /LABLINC / eqvt approved make ( )
1
-
-
... More
Oven Universal - 18" x 18" x 24 " ( Digital /Fan ),MOC-Outer MS powder coated & inner SS, size: 455*457*610, 2kW, :Labline /LABLINC / eqvt approved make ( )
1
-
-
... More
Binocular research microscope, size: 17*13*9.5, Labline /LABLINC / eqvt approved make ( )
1
-
-
... More
Vernier caliper DIGITAL 150MM, Electronics india / eqvt approved make ( )
3
-
-
... More
Weighing balance- 0.001 to 200 gm(REGULAR QUALITY), Electronics india / eqvt approved make ( )
1
-
-
... More
pH meter DIGITAL, Labtronics / eqvt make ( )
2
-
-
... More
TSS meter(Refractometer) Range 0 to 32°, Erma / eqvt make
2
-
-
... More
Digital hand held TDS meter 0-3000, HM Taiwan / eqvt approved make
1
-
-
... More
Digital multystem Thermometer (pen type) -50 to 300 degree C
2
-
-
... More
Flexible Arm Illuminated Magnifier Lens: Specially designed, distortion controlled high quality lens correctly sized for both eyed (bi-ocular) vision.
Lens Size: 170mm x105 mm, with power 3.2D. Provides about 4 times area magnification.
Working clearance below lens mount is 250 mm, and field seen can be up to 250 mm.
Illumination: 2 x7 watt standard CFLs with independent switches that enable shadow free or directional bright illumination in the work area.
Stand: Highly optimized design , spring balance stand with feather-touch movement to place lens in the correct position and orientation. Lens center can reach out 900 mm in front of mount axis with up to 360 degrees swivel
Model: Lensel Flexible Arm Illuminated Magnifier Deluxe Model with Movable Base (L104DX+L104B) / Eqvt
1
-
-
... More
Sieve shaker
Sieve Shaker Gyratory is designed to carry up to 7 sieves of 6 inch or 8 inch diameter. The 12 inch diameter sieves can be used with the help of adaptor. A 1/4 HP. motor through a reduction gear immersed in oil drives the shaker. Suitable for operation on 230 volts, 50 cycles single phase A.C Supply.Labline /LABLINC / eqvt approved make ( )
1
-
-
... More
Digital Moisture analyzer
3 shut off criteria (manual, timed or auto), 1 standard heating profile, 50° to 160° C heating range (5° C increments)
Backlit liquid crystal display (LCD)
Halogen heat source, ABS housing, metal pan support, metal pan handler, in-use cover
standard RS232 port, Labline /LABLINC / eqvt approved make ( )
1
-
-
... More
Soxhlet Heating Mantle 6 tests mantle type, suitable for laboratory applications.To be provided with two horizontal and two vertical rods complete with sockets and screws to hold flasks, individual pilot lamps and energy regulators etc.Labline /LABLINC / eqvt approved make ( )
1
-
-
... More
Muffle furnace Max. temp: 1000 deg C/1200 deg C
Working. temp:930 C/1130 C
230 Volts A. C
Body MOC:Mild Steel, Labline /LABLINC / eqvt approved make ( )
1
-
-
... More
Spectrophotometer
Microprocessor Visible Spectrophotometer with single
beam, grating1200 lines/mm optical system that comes with spectral bandwidth of 5 nm,
wavelength range of 325 ~ 1000 nm and
wavelength accuracy of + 2.0 nm. wavelength reproducibility of 1 nm,photometric accuracy of + % T, photometric
reproducibility of 0.5 % T, Tungsten – halogen lamp 6V/10Wbased light source and 4 LED, digital display support. Offering stable & accurate functionality support, these deliver, high VIS performance between 325 to 1000 nm and RS232C communication support.
Labline /LABLINC / eqvt approved make ( )
1
-
-
... More
Miscellaneous Items
-
-
-
... More
Pallets
Dimensions: 1000mm X 1200mm X 150 mm approx. ht
Colour: as approved by client
Pallet type: four side fork opening
Weight carrying capacity: 1500 Kg
Suitable to use with all kind of material handling equipments including hand pallet trucks etc.
Working Temperature range: (-) 25 deg C to (+) 10 deg C
heavy duty type, Top Deck : Perforated
MOC Shall be food grade plastic/HDPE and shall have excellent impact strength and high compression resistance. ( )
50
-
-
... More
Miscellaneous Items :
PVC Crates MOC: Food grade HDPE
Size: 600 x 400 x 320 MM - Only Side Perforated
80
-
-
... More
Miscellaneous Items :
PVC Crates MOC: Food grade HDPE
Size: 600 x 400 x 320 MM - All Side Solid
80
-
-
... More
Miscellaneous Items :
PVC Crates MOC: Food grade HDPE
Size: 600 x 400 x 160 MM - All Side Solid
80
-
-
... More
Platform type Weighing balance Capacity: 100 Kg with 10g accuracy
Full body in SS construction, , IP65 rated
Protected internal calibration
Red color 12.5 mm LED display pole type
Built in battery backup
2
-
-
... More
Table top type Weighing balance Capacity: 30 Kg with 5g accuracy
Full body in SS construction, , IP65 rated
Protected internal calibration
Red color 12.5 mm LED display pole type
Built in battery backup
4
-
-
... More
Table top type Weighing balance Capacity: 5 Kg with 0.5g accuracy
Full body in SS construction, , IP65 rated
Protected internal calibration
Red color 12.5 mm LED display pole type
Built in battery backup
Approx. pan size: 300mm x 300 mm
4
-
-
... More
Miscellaneous Items :
Carton Strapping Machine Semi Automatic
800 mm max. size of product may be considered. Make model : Novastrap-Pack NP-306 / Robertseal Corp. EXS-306 / Eqvt ( )
2
-
-
... More
Bag Closure Machine
Handheld portable bag closure sewing machine working on single phase supply with auto oil pump system
speed: 5 to 8 bags per min
Type of bags: PP,HDPE bags IP65 rated ( )
2
-
-
... More
Band Sealer machine with stand- Horizontal
Continuous sealer machine, horizontal
Adjustable temperature
variable speed conveyor, , 600 mm
Capacity: 5 kg
Sealing width: 15 to 20 mm
Type: Horizontal
Stand: to be provided IP65 rated ( )
2
-
-
... More
Foot operated band sealer
Foot peddle operated Adjustable temperature
variable speed conveyor, 600 mm
Capacity: 5 kg
Sealing width: 15 to 20 mm
Stand: to be provided IP65 rated ( )
1
-
-
... More
Fly Catcher / Insect Killer
Supply & fixing of industrial type fly catcher / insect killer, 2 feet model, Stainless Steel Body 304 with stainless steel screws and stainless steel grills with UV lamp 18w X 2 nos tubes, suitable mounting arrangment on walls/ceiling as per site requirement. Confirming to CGMP & food safety standards. ( )
10
-
-
... More
Miscellaneous Items : SITC of Hi-wall type split AC units, BEE 3 star rated (suitable for cooling mode only) including condensing unit and indoor unit with necessary refrigerant piping, duly insulated with Nitrile / EPDM insulation and drain piping to be led to the nearest drain point.,Electrical cabling between condenser & evaporator to be included. Wireless Remote Controllers for Hi-wall Units with battery and ON/OFF functions along with temperature setting, etc. to be included. Sturdy MS Stand with two coats of primer and two coats of oil paint of approved colour etc as required & Floating foundations of concrete blocks (if required), rubber pads to be included. Capacity: 5.2 kW (1.5 TR)
For Office (1 no), for packing room (3 nos) ( )
4
-
-
... More
Hydraulically Operated Hand Pallet Truck
Type : Hydraulically operated Hand Pallet Truck
Manufacturer : Godrej / Toyota / Linde / Jungheinrich / Nilkamal / Josts / Eqvt.
Model No. : to be mentioned
Load Capacity in kgs: 1500 kg
Fork Length in mm (Suitable for liifting pallet of size of 1000 mm X1200 mm X154 mm )
Wheel MOC : Nylon / Polyurethane
Suitable for heavy duty operation and long life, ( )
4
-
-
... More
SITC of RO water plant of capacity 1000 lph complete with raw water pump CRI/kirloskar/ eqvt, sand filter, carbon filter, anti-scaling dosing system, micron cartridge filter (5 micron) ss316 construction, high pressure pump in SS construction, RO product water storge tank, raw water storage TANK, Membranes (imported), solenoid valves, auto flushing system, designed noise less fittings, dosing pump & tank inside cabinet, control panel fro operation, power control cabling, earthing, multi port valve, back wash & service mode MPV, float switch for tank operation, sturdy skid frame in SS construction etc. as may be required. ( )
1
-
-
... More
SITC of portable type, refrigeration based, industrial dehumidier unit suitable for 5m x5m area, ht: 4m. The unit shall work on single phase 230V supply, complete with water collection tank, starter & control panel,RH indicator cum controller,MOC:SS304,castor wheels etc.complete. ( )
1
-
-
... More
Supply,fabrication, fixing of bollards, panel protection gaurds, wheel gurads complete with baseplate & its fixing (if required) in MS pipe of various diameters as per requirement and design as approved by consultants.including two coats of synsthetic enamel paint inclusive of red oxide primer coat. ( )
1200
-
-
... More
Providing fabricationg and erecting in position Structural Steel (channels, angles etc), for insulated roof/wall panel supports, primary supports at roof level for ACUs etc. as per approved drawings and specifications and instructions including straightning, cutting, drilling, bending, welding, reveting, bolting, splicing and provising and casting in position foundation bolts etc. as may be required and including three coats of synsthetic enamel paint inclusive of red oxide primer coat. ( )
1500
-
-
... More
Supply & fabrication of support structure (channels/angles/square pipes) in SS304 mirror finish ( )
200
-
-
... More
SOLID WASTE DISPOSAL : - Dustbin 240 Liter Blue WB-240 Dimensions : 725 x 580 x 1075 mm ( 107 x 72 x 58 cm )
Heavy Duty
Sun proof
Waste Garbage Bins
Wheeled Bins
Easy to maintain & Use
Environment Friendly Long Lasting
Capacity : 240 Litre ( )
5
-
-
... More
Electrical Work - Internal Electrical Installation, Transformer, Diesel Generator, and Area Lighting Work
-
-
-
... More
Supplying and erecting HMS PVC conduit FRLS grade 25 mm dia. with necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC(1-1-9) ( 1-1-9)
182
-
-
... More
Supplying and laying HMS PVC conduit FRLS grade 25 mm dia with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC(1-1-10) ( 1-1-10)
364
-
-
... More
Supplying and erecting HMS PVC conduit FRLS grade 32 mm dia. with necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC(1-1-11) ( 1-1-11)
91
-
-
... More
Supplying and laying HMS PVC conduit FRLS grade 32mm dia. with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC(1-1-12) ( 1-1-12)
182
-
-
... More
Supplying and erecting 25 mm dia. corrugated flexible polypropylene conduit(1-2-2) ( 1-2-2)
48
-
-
... More
Supplying and erecting PVC trunking (PVC casing-n-capping) of size 20 mm with accessories on wall/ceiling as per specification No: WG-MA/CON.(1-2-6) ( 1-2-6)
12
-
-
... More
Supplying and erecting PVC box trunking of size 50x50 mm. with accessories on wall/ceiling as per specification No: WG-MA/BOX(1-2-11) ( 1-2-11)
12
-
-
... More
Supplying and erecting mains with 2x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW(1-3-1) ( 1-3-1)
288
-
-
... More
Supplying and erecting green colour earthing with 1x 1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW(1-3-1) ( 1-3-1)
288
-
-
... More
Supplying and erecting mains with 2x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW(1-3-2) ( 1-3-2)
488
-
-
... More
Supplying and erecting green colour earthing with 1x 2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW(1-3-2) ( 1-3-2)
488
-
-
... More
Supplying and erecting mains with 4x 4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW(1-3-3) ( 1-3-3)
120
-
-
... More
Supplying and erecting green colour earthing with 1x 4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW(1-3-3) ( 1-3-3)
120
-
-
... More
Supplying and erecting mains with 4x 6 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW(1-3-4) ( 1-3-4)
120
-
-
... More
Supplying and erecting mains with 2x6 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW ( 1-3-4)
190
-
-
... More
Supplying and erecting green colour earthing with 1x 6 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW(1-3-4) ( 1-3-4)
310
-
-
... More
Supplying and erecting mains with 4x 10 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW(1-3-5) ( 1-3-5)
72
-
-
... More
Supplying and erecting green colour earthing with 1x 10 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW(1-3-5) ( 1-3-5)
72
-
-
... More
Supplying and erecting modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete.(1-6-1) ( 1-6-1)
22
-
-
... More
Supplying and erecting modular type switch 16A duly erected on provided plate and box with wiring connections complete.(1-6-2) ( 1-6-2)
4
-
-
... More
Supplying and erecting modular type 3 pin 6A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete.(1-6-10) ( 1-6-10)
11
-
-
... More
Supplying and erecting modular type 3 pin 6 / 16A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete.(1-6-11) ( 1-6-11)
4
-
-
... More
Supplying and erecting modular type (two module) electronic step regulator for fan, duly erected on provided plate and box with wiring connections complete.(1-6-23) ( 1-6-23)
2
-
-
... More
Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 3 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.(1-6-36) ( 1-6-36)
2
-
-
... More
Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 6 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.(1-6-38) ( 1-6-38)
4
-
-
... More
Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 12 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.(1-6-40) ( 1-6-40)
4
-
-
... More
Point wiring for light/bell concealed type in min 20 mm FRLS grade HMS PVC conduit with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification No: WG-PW/CW(1-7-5) ( 1-7-5)
62
-
-
... More
Point wiring for light/bell concealed type in min 20 mm FRLS grade HMS PVC conduit with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification No: WG - PW/CW(1-7-5) (For point wiring in stair case with 2 way control point increase rate by 50% of point wiring.) ( 1-7-5 & Note-3)
2
-
-
... More
Point wiring for ceiling fan concealed type in min 20 mm FRLS grade HMS PVC conduit with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification No: WG-PW/CW(1-7-6) ( 1-7-6)
2
-
-
... More
Wiring for plug on board with Switch socket surface/concealed type, copper wiring and earthing and with modular accessories as per specification No: WG-PW/CW(1-7-26) ( 1-7-26)
21
-
-
... More
Supplying and erecting LED square / circular Max. 18 W down lighter/ Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 2000 Lumens, min. efficacy of 110 lumen/W, CRI80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD10%, p.f. 0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty..(2-1-5) ( 2.1.5)
10
-
-
... More
Supplying and erecting bulk head LED fitting max. 10W with high transitivity diffuser with system lumens output of min. 1100 lumens, min. efficacy of 110 lumen/W, CRI80, CCT upto 6500K, Beam Angle of 120 deg., THD10%, p.f. 0.95, operating range of 140-260V, in built surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, IP66, IK09 rated on provided PVC Block / wooden board with 3 years warranty.(2-1-15) ( 2-1-15)
7
-
-
... More
Supplying and erecting anodized aluminium corridor / passage / mirror light LED fitting (2 feet) Max. 12W with high transitivity diffuser with min. system lumens output of 1200 lumens, min. efficacy of 100 lumen/W, CRI80, CCT upto 6000K, Beam Angle of 110 deg., Ripple5%, THD10%, p.f. 0.95, operating range of 200-270V, surge protection of 2 kV, Life class of 50,000 Hrs. at L70B50, including driver with end caps on provided PVC Block / wooden board with 3 years warranty.(2-1-16) ( 2-1-16)
10
-
-
... More
Supplying and erecting inverter LED batten 20W tube light fitting with polycarbonate housing, heat sink, integrated HF electronic driver, Min. 2600 mAh Lithium ion Battery with charging time of 8-10 Hours and backup time of Min. 3 hrs. with minimum 25% of initial Watts having luminous efficacy of 100 lumen/watt, CRI80, CCT of 6500K and THD=20% having useful life of minimum 25000 hrs. with overheating protection with 2 years warranty.(2-1-22) ( 2-1-22)
30
-
-
... More
Supplying and erecting Electronic type cordless call bell erected on T.W. board having portable bell push working on 9V D.C. battery and (effective range upto 45 meter) bell on 250 V A.C. supply.(2-3-15) ( 2-3-15)
1
-
-
... More
Supplying and erecting integrated LED Highbay Fitting 70W IP65 & IK08 class having die cast aluminium housing with polycarbonate diffuser with integrated optics, having system lumens output of Min.10000 Lumens, min. efficacy of 145 lumen/W, CRI70, CCT upto 6500K, THD10%, p.f. 0.90, operating range of 140-240V, inbuilt surge protection of 4 kV, Life class of 50,000 Hrs. at L50B50 , including driver complete with 3 Year warranty as per specification No FG-ODF/FLS2. ( 2-6-1)
96
-
-
... More
Supplying and erecting fresh air cum exhaust fan of light duty 250 V A.C. 50 cycles 300mm. 1400 RPM rust proof body & blades, wire mesh, duly erected, complete.(-10-13) ( 2.10.13)
4
-
-
... More
Supplying and erecting exhaust fan heavy duty 230 V A.C. 50 cycles 450 mm. 1400 RPM complete erected in position as per specification no. FG-FN/EXF ( 2-10-18)
2
-
-
... More
Supplying and erecting Energy Saving BLDC Ceiling fan 230 V A.C. 50 cycles 1200 mm, max. energy consumption of 28W having service ratio (CMM/W) of Min. 8 , PF0.9, THD10% without IR remote control/compatible speed regulator, Temperature Rise of Max. 40 deg. C, having external mounted control PCB completely erected in position as per specification no. FG-FN/CF(2-10-22) ( 2-10-22)
2
-
-
... More
Supplying and erecting fan hook box of 10 mm M.S. round bar bounded to the R.C.C. bars upto 50 mm length each side and pierced through a 16 S.W.G. thick aluminium/M.S. Bowl 100 mm dia. or equivalent square size and having depth upto 75 mm complete erected with duly painted by one coat of red oxide paint and two coats of paint erected in position and without any leakage of slurry of cement concrete on either side of the box and positioned to the bottom level of the slab.(2-11-5) ( 2-11-5)
2
-
-
... More
Supplying and erecting ‘B’ class G.I .pipe / M.S. pipe down rod duly painted for fan complete erected with PVC three core flexible cable 1 sq. mm copper PVC wire.(2-11-6) ( 2-11-6)
1
-
-
... More
Supplying, erecting and marking SPMCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB(5-3-2) ( 5-3-2)
24
-
-
... More
Supplying, erecting and marking SPMCB 6A to 32A, B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB(5-3-3) ( 5-3-3)
24
-
-
... More
Supplying, erecting & marking DPMCB 40A to 63A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB ( 5-3-8)
50
-
-
... More
Supplying, erecting and marking TPMCB 6A to 32A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB(5-3-10) ( 5-3-10)
4
-
-
... More
Supplying, erecting and marking TPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB(5-3-11) ( 5-3-11)
20
-
-
... More
Supplying, erecting & marking FPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB ( 5-3-13)
24
-
-
... More
Supplying and erecting triple pole and neutral distribution board (TPNDB), SPMCB of 4 ways/phase (12 poles), with door, 1.2mm thickness, surface/flush mounted, IP 43 protection on iron/GI frame (horizontal busbar type) as per specification no. SW-SWR/MCBDB(5-4-1) ( 5-4-1)
4
-
-
... More
Supplying & erecting triple pole and neutral distribution board (TPNDB), SP/TP MCBs total 8 ways /24 poles, with door, 1.2mm thickness surface/flush mounted, IP 43 Protection on iron/GI frame (vertical busbar type) as per specification no. SW-SWR/MCBDB ( 5-4-5)
1
-
-
... More
Supplying and erecting CRCA sheet metal one way enclosures of 1.2mm thickness suitable for DP MCB /TP MCB/FP MCB/RCCB/RCBO complete erected on angle iron/GI frame.(5-4-13) ( 5-4-13)
37
-
-
... More
Supplying & erecting triple pole and neutral distribution board (TPNDB), SP/TP MCBs total 8 ways /24 poles, with door, 1.2mm thickness surface/flush mounted, IP 43 Protection on iron/GI frame (vertical busbar type) as per specification no. SW-SWR/MCBDB ( 5-4-5)
1
-
-
... More
Supplying, Erecting and Commissioning of 4 pole RCCB 40A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB(5-6-5) ( 5-6-5)
4
-
-
... More
Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3 core 2.5 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL ( 7-1-7)
610
-
-
... More
Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3 core 4 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL ( 7-1-8)
210
-
-
... More
Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 10 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL ( 7-1-28)
330
-
-
... More
Providing and erecting hot dipped galvanised ladder type cable tray manufactured from 16 SWG (1.6 mm thick) GI sheet of 150 mm width & 75 mm height complete with necessary coupler plates & hardware.(7-11-6) ( 7-11-6)
210
-
-
... More
Providing and erecting hot dipped galvanised ladder type cable tray manufactured from 16 SWG (1.6 mm thick) GI sheet of 300 mm width & 75 mm height complete with necessary coupler plates & hardware.(7-11-8) ( 7-11-8)
210
-
-
... More
Providng earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results as per specification no. EA-EP(9-1-1) ( 9.1.1)
6
-
-
... More
Providing pipe type earthing with 40mm. dia. G.I. pipe or 20 mm dia. G.I. Rod complete with all materials testing and recording the results as per specification no. EA-EP(9-1-4) ( 9-1-4)
14
-
-
... More
Supplying and erecting GI strip of high purity required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint with joints required. As per specification no EA-EP.(9-2-3) ( 9-2-3)
305
-
-
... More
Supplying and erecting conventional spike type air termination suitable to carry lightning stroke made up of heavy gauge 40 mm dia copper pipe of standard length with 5 Nos. copper spikes fixed on copper ball as air terminals duly threaded in copper pipe erected on provided foundation complete.(9-3-1) ( 9-3-1)
7
-
-
... More
CCTV work
-
-
-
... More
Supplying and erecting HMS PVC conduit FRLS grade 25 mm dia. with necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC. ( 1-1-9)
171
-
-
... More
Supplying and laying HMS PVC conduit FRLS grade 25 mm dia with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC. ( 1-1-10)
342
-
-
... More
Supplying and erecting 20mm dia. corrugated flexible polypropylene conduit ( 1-2-1)
6
-
-
... More
Supplying and erecting 10m HDMI cord low voltage grade minimum 4k compliant to be laid in provided conduits with male/female 19 pin HDMI connectors complete.. ( 1-8-23)
2
-
-
... More
Supplying and installing cat-6 cable suitable for networking as per specification no. WG-COC/NC ( 1-10-1)
684
-
-
... More
Supplying and installing cat-6 armoured cable with ECCS tape suitable for networking as per specification No. WG-COC/NC ( 1-10-7)
110
-
-
... More
Supplying, fixing, and configuring 24 ports, POE switch in provided rack as per specification No. WG-NWC/ENS(1-11-3) ( 1-11.3)
2
-
-
... More
Supplying, installing and testing UTP connector (RJ-45) as per specification No. WG-NAS/UTPC. ( 1-12-1)
31
-
-
... More
Supplying and fixing POE adaptor to provide DC supply to ethernet devices as per specification No. WG-NAS/PEA ( 1-12-15)
2
-
-
... More
Supplying and fixing 9U wall mount rack (Dimension-DxWxH – 500x600x500 mm) as per specification No. WG-NAS/RAK ( 1-12-18)
2
-
-
... More
Supplying, installing, testing and commissioning of 2kVA capacity online pure sine wave, with backup time of 03 hrs. PWM & IGBT based UPS with 0.8 to unity output pf, single phase input & 1 phase output complete with all protections as per specification no. AP-UPS(3-7-2) ( 3-7-2)
1
-
-
... More
Supplying and erecting 12V/100Ah SMF battery with battery terminal wire, duly charged with 24 months warranty complete.(3-8-12) ( 3-8-12)
1
-
-
... More
Supplying and erecting iron work, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.(6-1-19) ( 6-1-19)
110
-
-
... More
Supplying and erecting steel tubular swaged pole 139.7 x 114.3 x 88.9 mm dia with 4.5x3.65x3.25 mm thickness (4.5+1.75+1.75 m) length respectively and total 8.0 m long with pole cap, base plate in provided foundation. (weight 101 kg) as per specification no. OH-PL/STP (For PTZ Camera) ( 8-1-1)
1
-
-
... More
Providing pipe type earthing with 40mm. dia. G.I. pipe or 20 mm dia. G.I. Rod complete with all materials testing and recording the results as per specification no. EA-EP(9-1-4) ( 9-1-4)
1
-
-
... More
Supplying & erecting of High definition 4/5 Megapixel IP IR Dome Camera
with following features
Image Sensor : minimum 1/2.8" Progressive Scan CMOS, Video Resolution : minimum 2592 x 1520
Video Compression : H.264, H.265 or higher, at least Three individually
configurable stream, Frame rate : minimum 25 fps at all resolutions, WDR : minimum 120 dB Wide Dynamic Range, ONVIF profile conformant, minimum IR distance : 50m, Lens Type : 2.8/4/6 mm Lens, fixed focal, Field of View :
2.8 mm, horizontal FOV 107°, vertical FOV 57°, diagonal FOV 129°
4 mm, horizontal FOV 86°, vertical FOV 47°, diagonal FOV 102°
6 mm, horizontal FOV 55°, vertical FOV 29°, diagonal FOV 65°
Lux sensitivity - minimum 0.2 Lux at color, minimum 0.05 Lux at Black & White,
0.0 Lux (IR) Night Vision Distance minimum IR - 50m. Camera minimum Adjustment Angles - Pan : 350°, Tilt : 72°, Rotate : 350°. Power Supply : Support 12VDC & PoE, IP67, IK10 - Vandal Resistant. Built in micro SD/SDHC/SDXC card slot of minimum 128 GB, Built in microphone. minimum Input/Output - Audio in × 1, Audio Out × 1, Alarm in × 1, Alarm Out × 1. Image Settings : Rotate mode, saturation, brightness, contrast, sharpness, gain,
white balance. Image Enhancements : Day/Night-Auto (ICR)/Color/Black & White, 3D Digital
Noise Reduction, Automatic White Balance, Automatic Gain Control, Backlight
Compensation, Highlight Compensation.
Events : Privacy Masking, Motion detection, Scene change detection, Face
capture, Video tampering, audio exception detection, Region entrance detection,
Region exiting detection. Operating temperature ( -30 to 60° C ) . Security - User account and password protection, HTTPS, IP filter, IEEE 802.1X,
digest authentication, user access log, TLS1.2, AES - 256, SSH/Telnet closed,
FTP disabled. Protocol - DHCP, UDP, HTTP, HTTPS, NTP, DNS, RTP, RTSP, SMTP,
SSL/TLS, TCP/IP, Secure Real-Time Transport Protocol (SRTP), Bonjour,
SNMP and Secure shell (SSH) supported protocol. RoHS, WEEE, ISO-14001 and REACH compliant, UL/EN OR equivalent
BIS/TECH/STQC or any indian standards as applicable, CE, FCC certified.
duly erected in position on wall/ceiling/false ceiling/provided pole (mounting
height not more than 5 meter) etc with all accessories etc complete as per
specification no. CCTV-CAM. ( Non CSR)
24
-
-
... More
Supplying & erecting of High definition 4/5 Megapixel IP IR Bullet Camera
with following features
Image Sensor : minimum 1/2.8" Progressive Scan CMOS, Video Resolution : minimum 2592 x 1520
Video Compression : H.264, H.265 or higher, at least Three individually
configurable stream, Frame rate : minimum 25 fps at all resolutions, WDR : minimum 120 dB Wide Dynamic Range, ONVIF profile conformant, minimum IR distance : 50m, Lens Type : 2.8/4/6 mm Lens, fixed focal, Field of View :
2.8 mm, horizontal FOV 107°, vertical FOV 57°, diagonal FOV 129°
4 mm, horizontal FOV 86°, vertical FOV 47°, diagonal FOV 102°
6 mm, horizontal FOV 55°, vertical FOV 29°, diagonal FOV 65°
Lux sensitivity - minimum 0.2 Lux at color, minimum 0.05 Lux at Black & White,
0.0 Lux (IR) Night Vision Distance minimum IR - 50m. Camera minimum Adjustment Angles - Pan : 350°, Tilt : 72°, Rotate : 350°. Power Supply : Support 12VDC & PoE, IP67, IK10 - Vandal Resistant. Built in micro SD/SDHC/SDXC card slot of minimum 128 GB, Built in microphone. minimum Input/Output - Audio in × 1, Audio Out × 1, Alarm in × 1, Alarm Out × 1. Image Settings : Rotate mode, saturation, brightness, contrast, sharpness, gain,
white balance. Image Enhancements : Day/Night-Auto (ICR)/Color/Black & White, 3D Digital
Noise Reduction, Automatic White Balance, Automatic Gain Control, Backlight
Compensation, Highlight Compensation.
Events : Privacy Masking, Motion detection, Scene change detection, Face
capture, Video tampering, audio exception detection, Region entrance detection,
Region exiting detection. Operating temperature ( -30 to 60° C ) . Security - User account and password protection, HTTPS, IP filter, IEEE 802.1X,
digest authentication, user access log, TLS1.2, AES - 256, SSH/Telnet closed,
FTP disabled. Protocol - DHCP, UDP, HTTP, HTTPS, NTP, DNS, RTP, RTSP, SMTP,
SSL/TLS, TCP/IP, Secure Real-Time Transport Protocol (SRTP), Bonjour,
SNMP and Secure shell (SSH) supported protocol. RoHS, WEEE, ISO-14001 and REACH compliant, UL/EN OR equivalent
BIS/TECH/STQC or any indian standards as applicable, CE, FCC certified.
duly erected in position on wall/ceiling/false ceiling/provided pole (mounting
height not more than 5 meter) etc with all accessories etc complete as per
specification no. CCTV-CAM ( Non CSR)
6
-
-
... More
Supplying & erecting of High definition 4/5 Megapixel IP IR PTZ Camera with following features
Image Sensor : minimum 1/2.8" Progressive Scan CMOS
Video Resolution: minimum 2880 x 1620
Video Compression : H.264, H.265 or higher, at least Three individually
configurable stream,
Frame Rate : minimum 30 fps at all resolutions,
WDR : minimum 120 dB Wide Dynamic Range,
ONVIF profile conformant.
Auto Tracking, Pre-set Tour Settings, Pan : 360° endless, Tilt : From -15° to 90°
(auto-flip 180°), minimum Pan Speed - from 0.1°/s to 160°/s, minimum Preset
Speed: 240°/s, minimum Tilt Speed - from 0.1°/s to 120°/s, minimum Preset
Speed : 200°/s, Min Presets- 250,
Min IR distance :150m,
Lens Type : minimum 4.3 - 12.5mm Lens min 16 x digital zoom, min 30 x
optical Zoom.
Focus Mode : Auto/Zooming/One Push Manual,
Lux sensitivity- minimum 0.2 Lux at color, minimum 0.05 Lux at Black & White,
0.0 Lux (IR) Night Vision Distance Min IR- 150m,
Power Supply : support 12/24 VDC, 24 VAC & PoE,
IP67/IP66, IK10,
built in micro SD/SDHC/SDXC card slot minimum 256 GB,
built in microphone.
minimum Input/Output : Audio in × 1, Audio Out × 1, Alarm in× 1, Alarm Out
× 1.
Image Settings : Rotate mode, saturation, brightness, contrast, sharpness, gain,
white balance.
Image Enhancements : Day/Night-Auto (ICR)/Color/Black & White, 3D Digital
Noise Reduction, Automatic White Balance, Automatic Gain Control, Backlight
Compensation, Highlight Compensation.
Events : Privacy Masking, Motion detection, Scene change detection, Face
capture, Video tampering, audio exception detection, Region entrance detection,
Region exiting detection.
Operating temperature ( -30 to 60° C ) .
Security : User account and password protection, HTTPS, IP filter, IEEE 802.1X,
digest authentication, user access log, TLS1.2, AES-256, SSH/Telnet closed, FTP
disabled.
Protocol-DHCP, UDP, HTTP, HTTPS, NTP, DNS, RTP, RTSP, SMTP,
SSL/TLS, TCP/IP, Secure Real-Time Transport Protocol (SRTP),Bonjour,
SNMP and Secure shell (SSH) supported protocol.
RoHS, WEEE, ISO-14001 and REACH compliant, UL/EN OR equivalent
BIS/TECH/STQC or any indian standards as applicable, CE, FCC certified.
duly erected in position on wall/ceiling/false ceiling/provided pole (mounting
height not more than 5 meter) etc with all accessories etc complete as per
specification no CCTV-CAM. ( Non CSR)
1
-
-
... More
Supplying, installing, testing & commissioning of 32/40 Ch. Network Video
Recorder (NVR), suitable connect Min. 32 IP Cameras, up to 5 Megapixel
Resolution, with HDMI/VGA outputs, provided HDMI output of 4K
resolution or VGA output with output up to 1920 × 1080.
Support H.265 or higher, H.264, MJPEG,
Incoming Bandwidth 250Mbps with minimum 4 SATA Hard Disks, ANR
Technology,
4 SATA interfaces for 4 HDDs and capacity of each HDD up to 8TB,
minimum 02 USB port, Alarm I/O 16/4, RJ-45 10/100/ 1000 Mbps selfadaptive
Ethernet interface,
ONVIF conformance,
Multiple network monitoring: Web viewer .
support protocol TCP/IP, DHCP, DNS, DDNS, NTP, SADP, SMTP, NFS,
iSCSI, UPnP™, HTTPS.
RoHS, UL, CE, FCC certified.
duly erected in provided U Rack with wiring connections, tagging and
programming etc. complete as per specification no. CCTV-NVR ( Non CSR)
1
-
-
... More
Supplying & erecting 8 TB internal Surveillance HDD suitable for SATA Port
of NVR, interface transfer rate 6 GB/S, maximum sustained transfer rate 210
MB/Sec to 213 MB/S. Drive bay supported 08+, Cameras supported up to 64,
Cache (MB) 256, Load/Unload Cycle -3000000, Work Load Rating per Year
180TB, MTBF 1000000 Hrs. HTTPS. RoHS, UL, CE certified, duly erected in
position in provided NVR as per specification no. CCTV-HDD ( Non CSR)
5
-
-
... More
Supplying & erecting 43" professional LED display with 1920*1080 (Full
HD) Display, suitable for 16/32 channel NVR and following features
Brightness: minimum 500 Cd/m2
Contrast Ratio: minimum 1000:1
Viewing angle: 178/178 deg.
Response time: maximum 8 ms
Inputs: HDMI, VGA, BNC,USB, Audio In, Built-in speakers maximum 10 W, Suitable to operate on 100-240 V 50 Hz AC supply and 24/7 Duty Cycle duly
erected on wall or table top with standard accessories like wall mount stand and
wiring connections etc. complete as per specifications no. CCTV-MON ( Non CSR)
1
-
-
... More
Transformer
-
-
-
... More
Providing and erecting 4 Pole MCCB, 415 V, 100A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact. MCCB with phase barriers on both sides, insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-SWR/MCCB(5-5-1) ( 5-5-1)
3
-
-
... More
Providing & erecting 4 Pole MCCB, 415V, 200A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-SWR/MCCB ( 5-5-2)
3
-
-
... More
Providing and erecting 4 Pole MCCB 415V, 250A, rated short-circuit breaking capacity 36 kA (Ics=100% of Icu) adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-SWR/MCCB(5-5-3) ( 5-5-3)
4
-
-
... More
Providing and erecting 4 Pole MCCB 415V, 400A, rated short-circuit breaking capacity 36 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure /panel as per specification no. SW-SWR/MCCB(5-5-4) ( 5-5-4)
3
-
-
... More
Supplying, installing, testing and commissioning air circuit breaker manual fixed type, non-drawout type, 650V, 630A, rated at 50º C without deration, 12kV Impulse, 4 pole (100% Neutral Protection), 50 kA (Ics=Icu=Icw for 1s), with standard accessories with ready to close, individual fault trip, alarm and trip indications, mechanical and electrical anti pumping, soft/ hard rating plug (including hard rating plug CT) with Micro-processer based LCD display release with LSIG and temperature rise protection & with 4 C/O contacts for On-Off-Trip indication, min. 5 event and trip history on breaker display on provided iron frame as per specification no. SW SWR/ACB(5-8-1) ( 5.8.1)
2
-
-
... More
Supplying and erecting porcelain/epoxy bus bar support complete erected in provided M.S. box for 400A(5-10-28) ( 5-10-28)
12
-
-
... More
Supplying and erecting extended rotary handle for MCCB with adjustable telescopic rod suitable for up to 250A MCCB.(5-11-14) ( 5-11-14)
7
-
-
... More
Supplying and erecting extended rotary handle for MCCB with adjustable telescopic rod suitable for above 250A up to 630A MCCB.(5-11-15) ( 5-11-15)
3
-
-
... More
Supplying and erecting metal work in CRCA sheet including Iron work for supports with fabrication of boxes, panel boards, etc. including cutting, bending, drilling, welding, riveting, treated with anti-rust treatment and duly powder coated or painted with one coat of red lead paint and 2 coats of enamel paint complete.(6-1-1) ( 6-1-1)
500
-
-
... More
Supplying and erecting iron work, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.(6-1-19) ( 6-1-19)
150
-
-
... More
Supplying and erecting self-locking arrangement with keys in duplicate, made of brass of grade 1 compliance to IS 729-1979 duly erected, flush with surface of panel / cupboard(6-1-20) ( 6-1-20)
15
-
-
... More
Supplying and erecting of any size electrolyte aluminium patti or bar in bus bar chamber / in panel or any other purpose, 500 V with require capacity 99.9% aluminium purity with E91E Grade as per IS 5082 & Current Density 0.8 A per sq. mm. with fixing arrangement (like lug or bottle type lug) to both the end with high grade polyolefin insulation sleeve complete as per specification no. BCP-BB ( 6-2-11)
60
-
-
... More
Supplying and erecting panel mounting type digital ammeter having three and half digit LED display, external CT operated, calibrated for suitable to operate on 500V, 0 to 1000A having accuracy class of 0.5, AC supply with necessary PVC wire leads and lugs and mounting hardware on provided panel complete with calibration certificate from manufacturer.(6-3-7) ( 6-3-7)
3
-
-
... More
Supplying and erecting panel mounting type digital voltmeter having three and half digit LED display, calibrated for 0 to 750V AC suitable to operate on 500V having accuracy class of 0.5 ,AC supply with necessary PVC wire leads and lugs and mounting hardware on provided panel complete with calibration certificate from manufacturer.(6-3-8) ( 6-3-8)
3
-
-
... More
Supplying and erecting AC Three Phase Four wire Multifunction Energy Meter of Rating 10 - 60A, Class 1.0 with din rail / Panel mounting to measures and display parameters with RS485 Modbus communication port. mounting whole current operated meter to measures and display V, I, kWh, KVAh, KW, KVA, P.F, THD, RS 485 Communication port. Electrical parameters shall be available on com port with their mapping address open for third party software(6-3-19) ( 6-3-19)
3
-
-
... More
Supplying and erecting LED type indicating pilot lamp with LED colours red / yellow / green, 230 / 250V on provided box / panel with necessary material, wiring & connections etc.(6-5-5) ( 6-5-5)
6
-
-
... More
Supplying and erecting LED type indicating pilot lamp with LED colour blue, 230 / 250 V on provided box / panel with necessary material, wiring & connections etc.(6-5-6) ( 6-5-6)
3
-
-
... More
Supplying, installtion & marking of surge arrestor/ surge protection device at the sub main distribution board after the incoming breaker of type 2 tested for Imax 15 kA for three phase and neutral with compliance to IEC 61643-11 as per specification no. CP-SPD(6-6-8) ( 6-6-8)
3
-
-
... More
Supplying and erecting 125 kVAr, 440 V 3 phase, 50 Hz., Contactor Logic & Intelligent Relay micro APFC passive filter panel, consisting of suitable steps of APP/MPP type capacitor units with Detuned (harmonic filter) reactors of suitable rating , APFC panel shall be compliance to IEC 61439 and power quality IEC 61921 standard as per specification no CP-ED/APFC ( 6-7-6)
1
-
-
... More
Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 150 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL ( 7-1-21)
12
-
-
... More
Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 300 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL(7-1-24) ( 7-1-24)
110
-
-
... More
Supplying , erecting & terminating XLPE insulated, galvanised steel formed wire armoured (strip) cable 11 kV(E), 3 x 240 sq. mm. aluminium conductor laid in provided trench / pipe as per specification no. CB-HT ( 7-3-6)
72
-
-
... More
Providing and erecting Heat shrinkable indoor termination kit for 11 kV ( E ) XLPE HT cable 3x240 to 300 sq. mm. with necessary material as per specification no. CB-JT/HT(7-5-3) ( 7.5.3)
6
-
-
... More
Providing and erecting Heat shrinkable out door termination kit for 11 kV ( E ) XLPE HT cable 3x240 to 300 sq. mm. with necessary material as per specification no. CB-JT/HT(7-5-7) ( 7.5.7)
2
-
-
... More
Supplying and laying (including excavation) of suitable width & depth up to 90 cm) 146 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.(7-6-13) ( 7-6-13)
142
-
-
... More
Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results as per specification no. EA-EP(9-1-1) ( 9-1-1)
14
-
-
... More
Supplying and erecting GI strip of high purity required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint with joints required. As per specification no EA-EP.(9-2-3) ( 9-2-3)
20.02
-
-
... More
Supplying, installing, testing & commissioning compact substation with 3 phase, 11/0.433 kV, 50 Hz., 400 kVA, Mineral oil immersed Copper wound, without gas cushioning , hermetically Sealed transformer having indoor type transformer bushings, with HT side (Incoming side) load break switch of appropriate capacity and LT side (outgoing side) MCCBs (4 pole) of appropriate capacity , with inbuilt metering cubical, using type A winding insulation (kraft paper),standard accessories complete with test certificate with losses below 1225 Watts at 50% load, 3450 Watts at 100% load for transformer, as per IS:1180 (part 1) : 2014, with necessary permissions of Electrical Inspector, as per specification no SS- TR-SL ( 10-4-1 )
1
-
-
... More
Excavating hard murum / stone metal road by chiselling for preparing pit for poles stay or earth plates or for laying cables, pipes & clearing the site by removing debris & making the site as required complete.(16-1-6) ( 16-1-6)
8
-
-
... More
Making cement concrete foundation in 1:3:6 cement concrete, (20 to 25) mm. stone metal duly plastered with necessary curing for complete. (pole muffing or any other purpose).(16-3-7) ( 16-3-7)
10
-
-
... More
Diesel Generator
-
-
-
... More
Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 300 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL ( 7-1-24)
50
-
-
... More
Supplying and laying (including excavation of suitable width & depth up to 90 cm) 200 mm outside dia, double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete. ( 7-6-16)
20
-
-
... More
Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results as per specification no. EA-EP(9- 1-1) ( 36900)
6
-
-
... More
Supplying, erecting, testing and commissioning of diesel generating set with alternator of 250 kVA output continuous rating, 3 Phase, 415 V, 50c/s 0.8 p. f. A.C supply, a totally enclosed air cooled / liquid cooled multi-cylinder diesel engine developing suitable BHP at 1500 rpm with 10% overload for 1 hour in 12 hours, along with standard accessories, self-excited, self-regulated, screen protected alternator with static excitation system running at 1500 RPM as per IS 4722-2001 with voltage regulation +/- 5 %, with performance class G2 and maximum fuel consumption 42.30 Ltr/hr @75% loading. Both the engine and alternator direct coupled on a common fabricated steel base frame and mounted on anti-vibrating pads with standard control panel comprising meters, switchgears, indicators connected with suitable wires/cables, the complete set enclosed in composite Acoustic enclosure as fully assembled integral unit made of 16 SWG CRCA Sheet, sound absorbing material to restrict sound level up to 75 dB at 1.0 m, provided with first filling of oil, diesel not less than 425 Ltr etc. on provided M20 Grade CC Foundation and obtaining necessary approval from Electrical Inspector as per specification no. GEN-DG ( 11-1-18)
1
-
-
... More
Supplying, erecting, testing and commissioning of microprocessor based AMF panel suitable for diesel generating set of above 200 kVA up to 250 kVA capacity Three phase, 415 Volts, 50Hz A.C. with all standard features, safeties etc as per specification no. GEN-AMF. ( 11-2-15)
1
-
-
... More
Excavating hard murum / stone metal road by chiselling for preparing pit for poles stay or earth plates or for laying cables, pipes & clearing the site by removing debris & making the site as required complete.(16-1-6) ( 16-1-6)
8
-
-
... More
Making cement concrete foundation in 1:3:6 cement concrete, (20 to 25) mm. stone metal duly plastered with necessary curing for complete. (pole muffing or any other purpose).(16-3-7) ( 16-3-7)
6
-
-
... More
Area Lighting
-
-
-
... More
Supplying and erecting PVC insulated PVC round sheathed 1.5 sq.mm (30 no. x 0.25 mm dia.) 3 core flexible multi stranded copper Industrial cable for voltage grade up to 1.1 kV (1-3-14) ( 1.3.14)
144
-
-
... More
Supplying and erecting integrated LED street light fitting 70-75W IP65 & IK08 class having single piece pressure die-cast aluminium housing, having system lumens output of Min. 7700 Lumens, min. efficacy of 110 lumen/W, CRI70, CCT upto 6500K,THD10%, p.f. 0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete with 3 Years warranty as per specification No FG-ODF/FLS2. ( 2-4-6)
12
-
-
... More
Supplying and erecting three phase, 415V, street light control panel up to the max load of 6kW, TPN MCB 40A, powder coated CRCA 14 SWG sheet, outdoor type, having IP54,IK10 protection, suitable rating contactor, 24 hrs. astronomical time switch with minimum 5 years battery back up, auto/manual selector switch, ON/OFF push buttons, indicator lamps, control wiring, metering device, etc. for automatic operation, with overcurrent, short circuit, earth fault protection on provided iron frame / CC foundation.(5-2-5) ( 5-2-5)
1
-
-
... More
Supplying, erecting & marking SPMCB 0.5A to 5A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB (5-3-1) ( 5.3.1)
10
-
-
... More
Supplying and erecting GI sheet 1.6mm (16 SWG) caution board of size 250 x 200 mm duly painted with red oxide and enamel paint in Marathi, Hindi and English erected at position for HV/EHV (11000 Volts) installation with compliance to IS 2551-1982(6-1-16) ( 42375)
1
-
-
... More
Supplying and erecting iron work, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.(6-1-19) ( 6-1-19)
50
-
-
... More
Supplying, erecting & terminating XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 16 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL ( 7-1-29)
260
-
-
... More
Supplying and laying (including excavation of suitable width & depth up to 90 cm) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete. ( 7-6-9)
290
-
-
... More
Providing & erecting 9 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 200 mm A/F, top 100 mm A/F on provided foundation as per specification no. OH-PL/OPL ( 8-2-17)
10
-
-
... More
Providing and erecting galvanised 1000mm single arm sword type bracket with FRP dome and ball as per specification no. OH-PL/PBKT(8-2-21) ( 8-2-21)
8
-
-
... More
Providing and erecting galvanised 1000mm double arm sword type bracket with FRP dome and ball as per specification no. OH-PL/PBKT ( 8-2-22)
2
-
-
... More
Providng earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results as per specification no. EA-EP(9-1-1) ( 9.1.1)
1
-
-
... More
Providing pipe type earthing with 40mm. dia. G.I. pipe or 20 mm dia. G.I. Rod complete with all materials testing and recording the results as per specification no. EA-EP(9-1-4) ( 9-1-4)
10
-
-
... More
Supplying and erecting GI strip of high purity required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint with joints required. As per specification no EA-EP.(9-2-3) ( 9-2-3)
40
-
-
... More
Making cement concrete foundation in 1:3:6 cement concrete, (20 to 25) mm. stone metal duly plastered with necessary curing for complete. (pole muffing or any other purpose).(16-3-7) ( 16-3-7)
4
-
-
... More
Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq.m at 1.5 m depth including supply of steel, concrete, excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 9m & 10m high octagonal /conical GI pole). ( 16-3-10)
10
-
-
... More
Water Pump
-
-
-
... More
Supplying, erecting and marking TPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB(5-3-11) ( 5-3-11)
5
-
-
... More
Supplying, erecting & marking FPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB ( 5-3-13)
2
-
-
... More
Supplying, fixing, and commissioning MCB type change over switch 4 pole, 40A with 3 positions (I-O-II) with centre off position as per specification no. SW-SWR / MCBCOS(5-3-25) ( 5-3-25)
1
-
-
... More
Supplying and erecting CRCA sheet metal one way enclosures of 1.2mm thickness suitable for DP MCB /TP MCB/FP MCB/RCCB/RCBO complete erected on angle iron/GI frame.(5-4-13) ( 5-4-13)
7
-
-
... More
Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 6 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL(7-1-27) ( 7-1-27)
40
-
-
... More
Supplying and erecting G.I. pipe ‘A’ class 40 mm dia. erected for enclosing XLPE armoured cable on wall/pole as per specification no. CB-CE(7-6-2) ( 7-6-2)
20
-
-
... More
Supplying and laying (including excavation) of suitable width & depth up to 90 cm) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.(7-6-9) ( 7-6-9)
10
-
-
... More
Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm with funnel with a wire mesh for watering and brick masonry block C.l. cover complete with all materials, testing & recording the results as per specification no. EA-EP(9-1-3) ( 9-1-3)
2
-
-
... More
Providing pipe type earthing with 40mm. dia. G.I. pipe or 20 mm dia. G.I. Rod complete with all materials testing and recording the results as per specification no. EA-EP(9-1-4) ( 9-1-4)
1
-
-
... More
Supplying and erecting minimum Three & above star rated submersible pump set of 2.25 KW/3 HP with 415 V, 50 c/s AC supply suitable for 150 mm dia. borewell suitable for 100 to 450 LPM discharge at 53 to 5 m head & discharge & delivery Pipe Size-50mm diameter with a necessary H type clamps as per specification No. WP-SMP ( 12-2-4)
1
-
-
... More
Supplying and erecting minimum Three & above star rated submersible pump set suitable for erection on open well of 2.25 KW/3 HP with 415 V 50 c/s. A.C. supply, having delivery head from 27 to 9 m and discharge from 300 to 660 litres. per minute & pipe of Suction 65mm /Delivery 50 mm diameter erected with necessary H type clamps as per specification No. WP-OSP ( 12-3-1)
2
-
-
... More
Supplying and erecting flat flexible 3 core 2.5 sq.mm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete.(12-4-8) ( 12-4-8)
786
-
-
... More
Supplying and erecting flat flexible 3 core 4 sq.mm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete.(12-4-9) ( 12-4-9)
110
-
-
... More
Supplying & erecting flat flexible 3 core 6 sq.mm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete. ( 12-4-10)
48
-
-
... More
Supplying and erecting automatic control panel for 3 Phase , 415 volt, A.C, Submersible/centrifugal pump set up to 7.5 HP consisting of DOL starter having relay range 9-14 AMP,S.P.P., Combined ammeter/ voltmeter, phase indicating lamp enclosed in CRCA powder coated Vibration proof enclosure with IP 54 protection. Control Panel should offer single phasing, phase reversal, phase imbalance etc .(12-4-17) ( 12-4-17)
3
-
-
... More
Excavating hard Rock or bituminous road by chiselling for preparing pit for pole / stay/earth plate / for laying cable/ pipe & clearing the site by removing debris & making the site as required complete.(16-1-5) ( 16-1-5)
6
-
-
... More
Making cement concrete foundation in 1:3:6 cement concrete, (20 to 25) mm. stone metal duly plastered with necessary curing for complete. (pole muffing or any other purpose).(16-3-7) ( 16-3-7)
0.6
-
-
... More
Supplying and erecting ISI mark GI pipe 50 mm dia.‘B’ class at position with accessories complete as per specification no. CW-PLB/GP.(16-5-6) ( 16-5-6)
20
-
-
... More
Supplying and erecting high density polythene pipe ISI mark 50 mm. dia. suitable for pressure of 6 kg. / cm2 connected to jet/submersible pump with required material complete.(16-5-18) ( 16-5-18)
40
-
-
... More
Supplying and erecting 50 mm dia. gun metal sluice valve at position with necessary materials complete.(16-6-15) ( 16-6-15)
3
-
-
... More
Supplying and erecting non return valve 50 mm dia in position made of gun metal complete.(16-6-21) ( 16-6-21)
3
-
-
... More
ON-GRID Solar PV Rooftop System
-
-
-
... More
Supplying, installing, testing and commissioning of 10 kWp ON-GRID Solar PV System / Plant consisting Solar PV Poly Crystalline Panel (335 Wp X 30 Nos.) and Solar ON-GRID Inverter of similar capacity (THD3%) with interconnecting wires / cables up to solar ON GRID inverter, proper base plate, canopy box to house Inverter and necessary accessories i.e. ACDB/ DCDB , MCB etc. wiring up to solar Inverter in casing and capping, display board, sign board, two distinct earthing, lightning arrester, liaisoning charges, remote monitoring system with maintaining card/chip for 5 years including net charges for RMS System, complete up to net meter installation and export to the grid with 5 year ON-SITE warranty and fully comprehensive maintenance contract as per Specification no. ESD-RT-ONG ( 4-5-3
(New))
1
-
-
... More
Supplying, erecting and marking TPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB(5-3-11) ( 5-3-11)
1
-
-
... More
Supplying and erecting iron work, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.(6-1-19) ( 6-1-19)
696
-
-
... More
Supplying and erecting static energy meter with 3 x 240V 50 Hz. AC supply 10 to 60 A, ISI mark, accuracy class 1.0 with backlit LCD display, (Measuring and display Trivector, V, I, kW, PF, Hz, Last month history of kWh and MD in kW) with special features like TOD, Tamper logging, Optical Communication Port & Display in absence of Power & with transparent hinge type box complete erected on polished teak wood board duly wired with required size of weather proof PVC wires duly tested by electric supply company.(6-3-3) ( 6-3-3)
1
-
-
... More
Supplying and erecting AC three phase LT CT multifunction net meter DLMS compliance of accuracy class 0.5, 3 x 240V, 50Hz, with backlit LCD display, optical port & RS 232 port (measures import kWh, kVAh, export kWh, kVAh, Net kWh, kVAh, V, I, kW, 6 months history of energy, load survey, TOD, tamper detection & logging, power ON/OFF events, instantaneous parameters of rating 1/5A with display in absence of power) with wiring connections and mounting hardware on provided panels complete with calibration certificate from manufacturer. ( 6-3-14)
1
-
-
... More
Supplying, installtion & marking of surge arrestor/ surge protection device at the sub main distribution board after the incoming breaker of type 2 tested for Imax 40 kA for three phase and neutral with compliance to IEC 61643-11 as per specification no. CP-SPD(6-6-6) ( 6-6-6)
1
-
-
... More
Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results as per specification no. EA-EP(9-1-1) ( 9-1-1)
8
-
-
... More
Providing earthing with copper earth plate size 30 x 30 x 0.315 cm complete with all materials, testing & recording the results as per specification no. EA-EP(9-1-2) ( 9-1-2)
2
-
-
... More
Supplying and erecting aluminium strip of high purity required sizes used for earthing on wall and/or any other purpose with necessary aluminium clamps fixed on wall painted with bituminous paint with joints required as per specification no EA-EP.(9-2-1) ( 9-2-1)
15
-
-
... More
Supplying and erecting GI strip of high purity required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint with joints required. As per specification no EA-EP.(9-2-3) ( 9-2-3)
132
-
-
... More
Supplying and erecting conventional spike type air termination suitable to carry lightning stroke made up of heavy gauge 40 mm dia copper pipe of standard length with 5 Nos. copper spikes fixed on copper ball as air terminals duly threaded in copper pipe erected on provided foundation complete.(9-3-1) ( 9-3-1)
8
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements