City And Industrial Development Corporation Of Maharashtra Limited Tender

Supplying, Erecting, Testing and Commissioning of Corrocoating of Bowl Assembly and impeller of Vertical Turbine Pumps @single stage suitable for Head @58 Mtr. (2 years manufacturer performance guarantee after commissioning and onsite maintenance assistance)

Supplying, Erecting, Testing and Commissioning of FCMA H.T. Line Side Soft Starter for 3.3 kV, 50 Hz, 750 HP / 560 KW V.T. Pump Motor complete with Vaccuum By Pass device (VC), CT, Surge Supressor, Ammeter, Timer, Indication & control circuitry in a self standing panel connected at Line Side of H.T. motor excl. VCB Panel & motor Protection the enclousure shall be SS403. (2 years manufacturer performance guarantee after commissioning and onsite maintenance assistance)

Supplying and Erecting 1200 KVAR 3.3KV 3 Phase APFC Panel : 1) Vaccum Circuit breaker 3.6KV,400/ 630A,25/3 Sec, VCB Panel, Tripping & closing coil 110/230VAC, Spring Charging Motor 230VAC, Draw out & isolation horizontal Aux contact 4 no + 4 Nc C.T.P.T. Relay & Metering Complete. - 1 no. 2) Load breaker switch,400/630 AMP 3.6 KV, 3 phase, 25KA/1 sec. - 4 Nos. enclousure shall be SS403. 3) 3.6KV H.T. Fuse link 125 Amps for 300 KVAR - 12 Nos. 4) Vaccum contactor, 3.6KV, 3 pole, 400 Amps fixed type - 4 nos. 5) Series reactor,0.2%, Resin cast, copper wound naturally cooled, iron cored indoor, 3 phase 50 C/S. AC suitable for 300 KVAR, 3.3 KV, 3 phase Capacitor - 4 nos. 6) HT capacitor 300 KVAR (150 KVAR x 2 nos.) x 4 nos, 3.3KV, 3 phase, 50 C/S. AC - 1200 KVAR 7) Aluminium main bus bar 100 x 5 mm, stage bus bar 50 x 5 mm, & earth bus GI 50 x 5 mm 8) APFC relay Microprocessor based relay, digital, 4 stages - 1 no. 9) On-Off Push button set - 4 Nos. 10) On delay meter - 4 nos. 11) Indicating lamp set - 4 nos. 12) Auto manual switch - 4 nos. 13) Control MCb, 2 pole 10 Amp - 1 no., 6Amp- 2 nos. & 4 pole, 6 Amp-1 no. - 4 Nos. 14) Illuminating lamp with plug & On Off switch - 4 Nos. 15) Space heater & Thermos at with On-Off switch - 1 No. (2 years manufacturer performance guarantee after commissioning and onsite maintenance assistance) 16) HD exaust fan (AC AXIAL)230 VAC 8" with filter - 4 nos.

Providing and erecting Indoor type 3.3 KV HT Panel 3.3KV, 630A, 25KA/1 sec, 13 panel switchboard [02I/C + 01B/C+06 M/F O/G (560KW) + 02 Emergency motor feeder +02 C/F+2 Bus Pot] 1) Vaccum Circuit Breaker - 3.3KV, 630A, 25KA/ 1 SEC, VCB SPRING CHARGING MOTOR 110V DC, DRAW OUT & ISOLATION Horizontal WITH 4NO+4NC CONTACTS - 13 Nos. 2) CURRENT TRANSFORMER - CT-1 - 3.3KV, CT CORE-1:- CL 1.0, 7.5VA CORE-2:- CL-5P10, 7.5 VA ECS/PRECISE CT RATIO : 630/1-1A - 6 Nos. CT-2 - CORE-1:- CL 1.0, 7.5VA, CORE-2:- CL-5P10, 7.5 VA, CT RATIO : 630 /1-1 A - 03 Nos. CT-3 - CORE-1:- CL 1.0, 7.5VA CORE-2:- CLPS, 7.5 VA, CT RATIO : ** /1-1 A - 30 Nos. 3) POTENTIAL TRANSFORMER - LINE PT - PT, EPOXY RESIN CAST, FIXED TYPE CORE 1:- 50VA, CL1.0, CORE 2:- 50VA, CL3P3.3KV / 110V / 110V√3 / √3 / √3 WITH PT FUSES 3.15 A - 12 Nos. 4) PROTECTION RELAY (Numerical) - TRIPLE POLE IDMTL RELAY, WITH TRIP CKT SUP. 3 O / C + 1 E / F WITH HIGH SET O / C SETTING : - 50 % - 200 % OF 1A E / F SETTING : - 10 % - 40% OF 1A WITH HIGH SET FOR BOTH O/C & E/F AUX. VOLTAGE -110V DC., TYPE REJ601/P154 - 5 Nos., MOTOR PROTECTION RELAY AUX.VOLTAGE 110 VDC TYPE- P241 - 8 Nos. MASTER TRIP RELAY, TYPE - PQ8N COIL VOLTAGE 110 V DC, - 13 Nos., ANTIPUMPING RELAY AUX. VOLTAGE 110 V DC, TYPE :- CRM - 13 Nos. 5) METERING - MULTIFUNCTION METER METER DIGITAL TYPE WITH RS- 485 comm. CL 1.0 C.T.SEC.1 A , PT 110VAC - 13 Nos., AMMETER ,96 X 96 mm, MI TYPE AS PER C.T.RATIO -13 Nos., M.I. TYPE, VOLTMETER RANGE : - 0 - 4KV, P.T. RATIO : 3300/110 V AC - 2nos. 6) TEMP.SCANNER & LA - 12 CHANNEL TEMPERETURE SCANNER AUX. SUPPLY 110V DC - 8 Nos., METAL OXIDE 6KV, 10KA SURGE ARRESTOR - 24 Nos. 7) SELECTOR SWITCHES - BREAKER CONTROL SWITCH, PISTOL GRIP SPRING RETURN TYPE , T-N-C, & PUSH BUTTON - 13 Nos, LOCAL REMOTE SELECTOR SWITCH LOCKABLE WITH 02 NO + 2 NC ELEMENT - 13 nos, AMMETER SELECTOR SWITCH 4 POSITION OFF - R - Y - B - 13 nos., VOLTMETER SELECTOR SWITCH 4 POSITION OFF - RY - YB - BR - 4 nos. 8) ANNAUNCIATOR & HOOTER: - 8 WINDOW ALARM ANNUNCIATOR, WITH ACCEPT / RESET / TEST P B - 13 nos., HOOTER , 96X96MM FLUSH MOUNTED TYPE AUX. SUPPLY 110V DC - 2Nos., 9) INDICATING LAMPS:- IND LAMPS, DIA 22.5 ,LED TYPE 110V DC R VCB ON - 13 Nos. G VCB OFF - 13 Nos. A VCB AUTO TRIP - 13 Nos. W TRIP CIRCUIT HEALTHY - 13 Nos. B VCB SPRING CHARGED - 13 Nos. T VCB TEST POSITION - 13 Nos. S VCB SERVICE POSITION - 13 Nos. 10) Common Material:- AUX. RELAY FOR VCB CONTACT MULTIPLICATION - 26 Nos. AUX. RELAY FOR PLC - 26 Nos. 11 KV EPOXY INSULATORS - 90 Nos. MCB MCB, DP, 16 A - 16 Nos. MCB, DP, 10 A - 13 Nos. MCB, SP, 06 A - 65 Nos. MCB 4P - 2 Nos. TERMINAL, ELMEX FOR CT / PT DISCONNECTED TYPE - 21 Nos. END PLATES FOR ABOVE - 14 - Nos. FOR CONTROL CIRCUIT CST - 33 Nos. END PLATES FOR ABOVE - 14 Nos. PL PANEL LAMP WITH SWITCH PHILLIPS - 15 Nos. SPH SPACE HEATER, 60 W, 230 V AC WITH SWITCH GIRISH EGO - 15 Nos. TH THERMOSTAT SAI EGO 1 1 1 6 2 2 13 10.9 -------- 3 PIN WITH SWITCH ANCHOR 1 1 1 6 2 2 13 10.10 -------- WIRING , PVC COPPER FLEXIBLE WIRE POLYCAB 1 1 1 6 2 - 11 CONTROL 1.5 SQ.MM. GREY FOR D.C CONTROL 1.5 SQ.MM. BLACK FOR A.C CT - PT 2.5 SQ. MM COLOUR CODE R/Y/B GREEN FOR EARTHING GRADE 1.1 KV 10.11 -------- AL BUSBAR 630A MAIN SUDAL 1 1 1 6 2 2 13 WITH HBT SLEEVED 10.12 -------- EARTH BUS : - 50 X 06 mm AL SUDAL 1 1 1 6 2 2 13 10.13 -------- INDOOR TYPE, M.S. CUBICLE : HTS 1 1 1 6 2 2 13 CRCA, 2 mm thickness non load bearing parts & 2mm for load bearing parts, PROTECTION CLASS IP 4X SPACE HEATER, 60 W, 230 V AC WITH SWITCH - 15 Nos. TH THERMOSTAT SAI EGO - 15 Nos. 3 PIN WITH SWITCH - 15 Nos. WIRING, PVC COPPER FLEXIBLE WIRE - 13 Nos. CONTROL 1.5 SQ.MM. GREY FOR D.C CONTROL 1.5 SQ.MM. BLACK FOR A.C CT - PT 2.5 SQ. MM COLOUR CODE R/Y/B GREEN FOR EARTHING GRADE 1.1 KV AL BUSBAR 630A MAIN WITH HBT SLEEVED - 15 Nos. EARTH BUS : - 50 X 06 mm AL- 15 Nos. INDOOR TYPE, S.S. 403 CUBICLE powder coated, 2 mm thickness non load bearing parts & 2mm for load bearing parts, PROTECTION CLASS IP 4X - 15 Nos. (2 years manufacturer performance guarantee after commissioning and onsite maintenance assistance)

Supplying and erecting iron, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.

Providing earthing with galvanized iron earth plate size 60 x 60 x0.6 cm with funnel with a wire mesh for watering and brick masonry block C.l. cover complete with all materials, testing & recording the results as per specification no. EA-EP

Supplying and erecting GI strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint in an approved manner with joints required. As per specification no EA-EP.

Making cement concrete foundation in 1:2:4 cement concrete with foundation bolts and nuts complete. (cost of wooden box is included) (for pumps).

Supplying, Erecting, Testing and Commissioning of Instrumentation, PLC Scada Automation System and Vibration monitoring system for Clear Water Pumping Station. Instrumentation, PLC SCADA Automation for CWP 1) Level Transmitter 0 to 20 mtr. - 1 No. 2) Pressure transmitter 0 to 10 kg/cm2 - 7 No. 3) PLC, HMI and panel - 1 No. 4) SCADA - 1 No. 5) Work Station -1 No. 6) Energy Meter - 6 No. 7) A 4 Printer - 1 No. 8) Cable - 1 Lot 9) Tray -1 Lot 10) GPRS/ GSM Modem - 1 No. 11) 2 KVA UPS 1 hrs back up -1 No. 12) Earthing - 2 no. Vibration Monitoring System for Pumps 1) Vibration monitoring system with Velocity sensor, Key phaser transducer set for 6 pumps - 1 Lot 2) RTD for Winding Temperature - 18 No +18 Nos. standby. 3) RTD for Bearing Temperature - 12 No. Cost is inclusive of data management system & service provider charges including computers at WTP Jite & office and inclusive of acoustic enclosure with air conditioning (2 years manufacturer performance guarantee after commissioning and on site maintenance assistance. The cost is inclusive of lincensed software and service provider fees & Data management)

Supplying, erecting & terminating 3 x 300 sq. mm. aluminium 22 kV(E), XLPE armoured cable on wall/ceiling or laid in provided trench / pipe in an approved manner as per specification no. CBHT. The price should be inclusive considering rebate against replaced or old material

Providing and erecting Heat shrinkable outdoor termination kit for 11 kV (UE)/ 22 kV (E) XLPE HT cable 3x240 to 400 sq. mm. with necessary material as per specification no. CB-JT/HT

Providing and erecting Heat shrinkable straight through joint kit for 11 kV (UE)/22 kV ( E ) XLPE HT cable 3x240 to 300 sq. mm. with necessary material as per specification no. CBJT/HT

Supplying and erecting Aluminium conductor, XLPE / PVC - 3.3 kV, armoured cable complete erected in provided trench or on provided trays in an approved manner as per direction of Engineer In Charge 3 Core 240 sq mm. The price should be inclusive considering rebate against replaced or old material

Providing cable jointing Kit with cable jointing compound and material for various size of submersible cable up to 35 sq mm etc complete. OUT DOOR TERMINATION KIT for 3.3 / 6.6 kV XLPE 3 Core cable. 240-400 sq.mm

Supplying and laying (including excavation of suitable width & depth up to 90 cm) 200 mm outside dia, double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete

Supplying, erecting, testing & commissioning SF 6 Insulated 22kV, 630A, 16kA/3sec, 3 way outdoor, extensible motorised SCADA compatible RMU as per electric supply company specification consisting of 2 nos. feeder with load break switch and 1 no. feeder with VCB as per specification no. SW-HTS / RMU SCADA (2LBS +1VCB) alongwith earthing

Supplying, Erecting, Testing & Commissioning of outdoor type 22KV 630 Amp, 16KA/3sec extensible, motorized operated SF6 Gas insulated (I/C - 1 isolator, O/G - 4 VCB), Ring main unit. alongwith earthing

Supplying & laying (including excavation) 15 cm dia RCC NP2 class spigot pipe of standard thickness at required depth up to 90 cm below road / ground surface, for enclosing provided cable & necessary back filling with light ramming to make the road/ground surface as it was (Except bitumen carpet).

Providing & Construction of B.B. Masonry chanber with 10 cm thick 1:3:6 proportion PCC bedding, including excavation, B.B. masonry C.M. 1:5 proportion, 20 MM thick Cement plaster in CM 1:4 proprtion on both side precast RCC frame and cover etc. complete as directed by Engineer in charge of 2.5 X 2 M internal size and depth upto 1.5 M with precast RCC slab cover.

Complete job of liasion with MSEDCL & other statutory authority for scheme sanction & necessary permission & preparation of shop drawing & as built drawings for complete pumping installation complete with location of along with single line diagram The drawing shall be prepared as per directions of Engineer in charge.

Providing, Erecting, Testing and commissioning. Ductile Iron (SG - Iron), Electrically Actuator Operated D/F Butterfly Valves with manual overide and with Body, Disc in minimum Grade of GGG 50/SGI-500/7. Double eccentric disc, with renewable soft seal on the disc and body seat face of Nickel Weld Overlay. With liquid epoxy coating with minimum thickness of 250 microns applied on both body and disc inside and outside. Face to face dimensions as per BS: 5155/ IS: 13095. The valve shall have non- drive end disc locking arrangement as well as integral cast feet for proper resting on the surface. The gear box shall be heavy duty and of (IP - 68) or Equivalent. PN 1.6: SHORT BODY. (600 mm). The valve motor shall be protected against over torque and overheating alongwith SS304 packing plate (2 years manufacturer performance guarantee after commissioning and onsite maintenance assistance).

Providing, Erecting, Testing and commissioning Ductile Iron, D/F Swing Check Valves (NRV) slanted/straight seated with metallic, corrosion proof and wear resistant seat faces, body and disc of ductile cast iron GGG 50/SG Iron 500/7 or equivalent grade as per IS: 3896 (Part 2)-1985 and subsequent revisions. All the inside and outside of the body is to be coated with double coating of epoxy liquid. Drilled as per IS: 1538. PN 1.6.(600 mm) (2 years manufacturer performance guarantee after commissioning and onsite maintenance assistance).

Providing, Erecting, Testing and commissioning Ductile Iron High Performance, Triple function Tamper Proof SINGLE CHAMBER AIR RELEASE VALVES Generally confirming to AWWA C-512 and our design & drawing with tamper proof air vent. SS floats, Perforated Air Vent and Cage. Flanges drilled as per IS: 1538. DI Grade will be GGG50/SGI 500/7. Float, Cage, Sealing Arc in SS: 304. Valves will be electrostatically powder coated inside and outside. PN 1.6. With DI Resilient seated Isolating Sluice Valve (100 mm).

Providing, Erecting, Testing and commissioning Manually Wheel Operated Ductile Iron, D/F, Resilient seated, Pocket less, Glandless Gate Valve. Body of Ductile Iron of grade GGG 50/SGI-500/7 or equivalent grade as per IS 3896-part - 2 1985. The Wedge will be fully lined with EPDM. The Valves will be 100% leak proof. The face to face dimensions will confirm as per IS 14846/2000. Valves will be electro statically powder coated inside and outside. PN 1.6. Without By-Pass. Actuator will be E-Pack type. (With Integral Starter) (With Inbuilt Forward - Reverse Starter) ON-OFF DUTY. (600 mm) The valve motor shall be protected against over torque and overheating alongwith SS304 packing plate (2 years manufacturer performance guarantee after commissioning and onsite maintenance assistance).

Providing, Erecting, Testing and Commissioning of Pump Performance monitoring system for 6 Nos. 750 HP VT Pumps comprising of Thermowells (upto 35 bar), compatible temperature sensors, Pressure sensors and cabling and 1 no. Microprocessor enclosure (DIN rail mounting) and 115/230V AC to 12 V DC supply DIN module. (2 years manufacturer performance guarantee after commissioning and onsite maintenance assistance. The cost is inclusive of lincensed software and service provider fees & Data management)

Providing skilled Instrumentation technician for monitoring entire Pure Water pumping system automations and data management and corrective actions in coordination with Water Supply department for a period of 2 years after completion of Defect liability period