Chandrapur Cancer Care Foundation Tender

Supply and Placing in Position of Consulting room table as per attached image below. Product name: Finnesse Table plus ERU LHS Size : Main Table 1800 mm x 600 mm and side storage unit of size 1050mm x 450mm x 750mm Table Top : 25mm thick pre laminated particle board of approved make with approved shade of laminate finished. Edges to be finished with 2mm thick matching PVC edge beading of approved make.. Table Top Support : 25mm thick pre laminated particle board of approved make with approved shade of laminate finished. Edges to be finished with 2mm thick matching PVC edge beading of approved make. Side Storage Unit: made in 18mm thick prelam particle boards, openable shutters, adjustable shelves, approved hardwares, recessed handle all as per drgs. Wire Manager: As per Architect's requirement.

Supply and Placing in position of Medium Mesh Back Consulting room Chair of approved make, foam infill seat finished in approved flame retardant fabric of approved make, 5 Prong metal base, Nylon Casters with Twin wheel, Synchro tilt mechanism with Multi point locking, Pneumatic seat height adjustment (Gas lift), Seat Slider Mechanism, Adjustable Arms in polypropylene with cushion effect and tapering arms for better ergonomics, Adjustable cushioned Lumbar support. The chair fabric and mesh to be of approved shade and colour. Foam made out of molded polyurethane foam with the following properties:  Density: 45 – 55 Kg/m3  Hardness: 15 – 20 Kgf  Compression set: 50% 10 Max  Tensile strength: 1.03  Tear strength (Min) : 2.0 N/cm  Resilience : 50% - 60%  Comfort / Indentation Hardness : 15.4

Supply and Placing in Position of Consulting Room Visitor Chairs as per attached image below. Back & support made up in Pu mould of approved shade. Seat : Fabric finished with PU moulded foam having density of 40 kg/m3. 5 Prong metal base, Nylon Casters with Twin wheel, Synchro tilt mechanism with Multi point locking, Pneumatic seat height adjustment (Gas lift), Seat Slider Mechanism,

Supply and Placing in Position of Consulting Room Stool as per attached image below. M.S. Tubular four legs fitted on PVC stumps and SS TOP. without pneumatic system. only Seat to rotate 180degree. No foot rings.

Supply and Placing in position of High Mesh Back Chairs with Head Rest of approved make, foam infill seat finished in approved flame retardant fabric of approved make, 5 Prong metal base, Nylon Casters with Twin wheel, Synchro tilt mechanism with Multi point locking, Pneumatic seat height adjustment (Gas lift), Seat Slider Mechanism, Adjustable Arms in polypropylene with cushion effect and tapering arms for better ergonomics, Adjustable cushioned Lumbar support. The chair fabric and mesh to be of approved shade and colour. Foam made out of molded polyurethane foam with the following properties:  Density: 45 – 55 Kg/m3  Hardness: 15 – 20 Kgf  Compression set: 50% 10 Max  Tensile strength: 1.03  Tear strength (Min) : 2.0 N/cm  Resilience : 50% - 60%  Comfort / Indentation Hardness : 15.4

Supply and Placing in Position of Cabin table as per attached image below. Product name: Finnesse Table plus ERU LHS Size: Main Table Top of size 1650mm x 600mm and side table with credenza unit of size 1050mm x 450mm Table Top : 25mm thick pre laminated particle board of approved make with approved shade of laminate finished. Edges to be finished with 2mm thick matching PVC edge beading of approved make.. Table Top Support : 25mm thick pre laminated particle board of approved make with approved shade of laminate finished. Edges to be finished with 2mm thick matching PVC edge beading of approved make. Side Storage Unit: made in 18mm thick prelam particle boards, openable shutters, adjustable shelves, approved hardwares, recessed handle all as per drgs. Wire Manager: As per Architect's requirement.

Supply and Placing in Position of Linear workstation Size 1800mm x 600mm Table Top: 25mm thick pre laminated particle board of approved make with approved shade of laminate finisehed. Edges to be finished with 2mm thick matching PVC edge beading of approved make. Top Panel: 1700mm (L) x 150mm (H): Removable type soft board panel in approved shade as per floor scheme. Under Structure: MS powder coated legs 50mm x 50mm of approved design with aluminium diecast connectors, MS powder coated beam for supports Modesty Panels: Below table top: MS powder coated perforated modesty panel (575mm clear Height) with raceways. Wiremanagement: MS powder coated raceway of size 150mm x 50mm below table top and vertical tower in MS Powder coated of size 100mm x 600mm and height upto raceway for carring power and data, separator to be provided both in tower and raceways for data and power cables. Flip box on table top size 450mm x 150mm to access the switch sockets in Aluminium Anodized in approved shade with brush etc all as per detailed drawing. ACCESSORIES: Rate to be inclusive of metal powder coated mobile pedestal- 2D + 1F with numeric lock, 5 wheels support & Soft Lock system. Size 400mm (L) x 450mm (D) x 540mm (HT) Rate to be inclusive of Keyboard drawer below table top, CPU trolley Product Name : - Upbeat Recta Workstation

Supply and Placing in position of Medium Mesh Back Chairs of approved make, foam infill seat finished in approved flame retardant fabric of approved make, 5 Prong metal base, Nylon Casters with Twin wheel, Synchro tilt mechanism with Multi point locking, Pneumatic seat height adjustment (Gas lift), Seat Slider Mechanism, fixed Arms in polypropylene with cushion effect and tapering arms for better ergonomics, Adjustable cushioned Lumbar support. The chair fabric and mesh to be of approved shade and colour. Foam made out of molded polyurethane foam with the following properties:  Density: 45 – 55 Kg/m3  Hardness: 15 – 20 Kgf  Compression set: 50% 10 Max  Tensile strength: 1.03  Tear strength (Min) : 2.0 N/cm  Resilience : 50% - 60%  Comfort / Indentation Hardness : 15.4

Supply and Placing in position Queue Master from euronics as per mentioned specifications and detailed drawings as directed, approved by architect / Employer's representative Body Material: Stainless Steel Steel Finish: Satin & Chrome Pole Thickness: 2.5 Inch Pole Weight: 9 Kgs Pole Height: 910 mm Length : 3030 mm Base Type: Filled with Cast Iron Base Size: 320 mm Belt Length: 7 Feet Belt Directions: 4 Ways Belt Colour: Red & Blue

Supply and Placing in Position of Drawer Pedestal as per attached image below. Ply laminate finished mobile pedestal - 2D + 1F with numeric lock, 5 wheels support & Soft Lock system. Size 400mm (L) x 450mm (D) x 540mm (HT)

Supply and Placing in Position of Lockers as per attached image below. Product Name - PERSONAL LOCKER UNIT 1 Door PLU + Locker (Base) (1830H x 380W x 450D)

Supply and Placing in Position of Planter Box as per attached image below. Size 450mm X 450mm made up in approved marine ply and finished in approved laminate from all sides,

Supply and Placing in Position of Planter Box as per attached image below. Size 1200mm X 600mm X 450 mm made up in approved marine ply and finished in approved laminate from all sides

Supply and Placing in Position Workshop Table as per attached image below Size - 1500mm x 2400mm x 750mm Table top: 25mm thick prelaminated particleboard of approved make, and top finished in approved shade of laminate. Edge to be in matching 2mm thick PVC edge binding. Supports: MS in approved shade of powder coating.

Supply and Placing in Position Corner / Side table as per attached image below Size - 450mm x 450mm x 450mm Supports: MS in approved shade of powder coating .Table top: 10mm thk toughened glass

Supply and Placing in Position Corner / Side table as per attached image below Size - 450mm x 450mm x 450mm Supports: MS in approved shade of powder coating. Table top: 18mm thick Polished Granite Stone with polished edges.

Supply and Placing in Position of Three seater Sofa, as per attached image below. Seat, Back and Armrest - in Leatheritte finished with PU moulded foam having density of 40 kg/m3. Base: SS Brushed finished legs Legs / Base - SS Brushed finished legs

Supply and Placing in Position of Single seater Sofa, as per attached image below. Seat, Back and Armrest - in Leatheritte finished with PU moulded foam having density of 40 kg/m3. Base: SS Brushed finished legs Legs / Base - SS Brushed finished legs

Supply and Placing in Position Corner / Side table as per attached image below Size - 900mm x 600mm x 450mm Supports: MS in approved shade of powder coating .Table top: 10mm thk toughened glass

Supply and Placing in Position of Meeting Table as per attached image below. Size: 2400mm (L) X 1200mm Table top: 25mm thick prelaminated particleboard of approved make, and top finished in approved shade of laminate. Edge to be in matching 2mm thick PVC edge binding. Flip box on table top size as per drgs to access the switch sockets in Aluminium Anodized in approved shade with brush etc all as per detailed drawing. Supports : In Approved Metal powder coated as per detail drgs, Wire manager in fexible cable carrier vertibra of approved make.

Supply and Placing in Position of Meeting Table as per attached image below. Size: 3200mm (L) X 1200mm Table top: 25mm thick prelaminated particleboard of approved make, and top finished in approved shade of laminate. Edge to be in matching 2mm thick PVC edge binding. Flip box on table top size as per drgs to access the switch sockets in Aluminium Anodized in approved shade with brush etc all as per detailed drawing. Supports : In Approved Metal powder coated as per detail drgs, Wire manager in fexible cable carrier vertibra of approved make.

Supply and Placing in Position of Two seater Sofa, as per attached image below. Seat, Back and Armrest - in Leatheritte finished with PU moulded foam having density of 40 kg/m3. Base: SS Brushed finished legs Legs / Base - SS Brushed finished legs

Supply and Installation of 4 Door Personal Locker whose size shall be 380mm (W) x 450mm (D) x 1830mm(H) with One Main and One Addon Stackable units attached via common side panel making a bunch of 4 lockers in each set. Locking to be in 4-digit combination lock for keyless operation • The combination shall be reset to any 4-digit number by turning the dial from 0 to 9 • Shall provide 10000 numeric combinations of choice to the user. • Code setting can be done in 2 ways i.e. Combi Public & Combi Personal. • One recovery key shall be provided to recover the code if forgotten. •  Anti-bacterial plastic key cap for recovery key.. Material shall be CRCA 0.6mm thickness. Construction shall be Rigid Knockdown construction, shelf shall be uniformly distributed load capacity per each shelf level is 35 Kg maximum. Finish shall be epoxy polyester powder coated to the thickness of 50 microns. Handle/Label holder shall be Aesthetically appealing Snap fit ABS  plastic handle. Ventilation shall be attractive punched pattern for ventilation. All the dimensions will be as per the Original Manufacturer's Specifications. MODE OF MEASUREMENT SHALL BE PER SET OF 4 TEIR LOCKER COLUMN.[QRO]

Supply and Placing in Position of Dining Table as per attached image below. Size:1800mm x 900mm x 750mm Table top: 25mm thick prelaminated particleboard of approved make, and top finished in approved shade of laminate. Edge to be in matching 2mm thick PVC edge binding. Supports: SS brushed finished

Supply and Placing in Position of Foldable Dining table as per attached image below. Size 900mm X 1800mm Table top: 25mm thick prelaminated particleboard of approved make, and top finished in approved shade of laminate. Edge to be in matching 2mm thick PVC edge binding. The under structure shall have metal base with top folding mechanism and Supports to be on heavy duty lockable castors.[QRO]

Supply and Placing in Position of Dining Table as per attached image below. Size:1200mm x 900mm x 750mm Table top: 25mm thick prelaminated particleboard of approved make, and top finished in approved shade of laminate. Edge to be in matching 2mm thick PVC edge binding. Supports: SS Brushed finished

Supply and Placing in Position of Foldable Dining table as per attached image below. Size 900mm X 1200mm Table top: 25mm thick prelaminated particleboard of approved make, and top finished in approved shade of laminate. Edge to be in matching 2mm thick PVC edge binding. The under structure shall have metal base with top folding mechanism and Supports to be on heavy duty lockable castors.[QRO]

Supply and Placing in Position of Dining Table as per attached image below. Size:750mm x 750mm x 750mm Table top: 25mm thick prelaminated particleboard of approved make, and top finished in approved shade of laminate. Edge to be in matching 2mm thick PVC edge binding. Supports: SS Brushed finished

Supply and Placing in Position of Foldable Dining table as per attached image below. Size 750mm x 750mm Table top: 25mm thick prelaminated particleboard of approved make, and top finished in approved shade of laminate. Edge to be in matching 2mm thick PVC edge binding. The under structure shall have metal base with top folding mechanism and Supports to be on heavy duty lockable castors.

Supply and Placing in Position of Stackable Dining Chair, as per approved image below Back & Seat - PVC / PU moulded in approved shade Supports and Legs in SS brushed finished

Supply and Placing in Position of Linear workstation Size 1500mm x 600mm Table Top: 25mm thick pre laminated particle board of approved make with approved shade of laminate finished. Edges to be finished with 2mm thick matching PVC edge beading of approved make. Top Panel: 1400mm (L) x 150mm (H): Removable type soft board panel in approved shade as per floor scheme. Under Structure: MS powder coated legs 50mm x 50mm of approved design with aluminium diecast connectors, MS powder coated beam for supports Modesty Panels: Below table top: MS powder coated perforated modesty panel (575mm clear Height) with raceways. Wiremanagement: MS powder coated raceway of size 150mm x 50mm below table top and vertical tower in MS Powder coated of size 100mm x 600mm and height upto raceway for carring power and data, separator to be provided both in tower and raceways for data and power cables. Flip box on table top size 450mm x 150mm to access the switch sockets in Aluminium Anodized in approved shade with brush etc all as per detailed drawing. ACCESSORIES: Rate to be inclusive of metal powder coated mobile pedestal- 2D + 1F with numeric lock, 5 wheels support & Soft Lock system. Size 400mm (L) x 450mm (D) x 540mm (HT) Rate to be inclusive of Keyboard drawer below table top, CPU trolley Product Name : - Upbeat Recta Workstation

Supply and Placing in Position of Planter Box as per attached image below. Size 1200mm X 450mm made up in approved marine ply and finished in approved laminate from all sides

Supply and Placing in Position of Dining Table as per attached image below. Size: 900mm dia x 750mm Table top: 25mm thick prelaminated particleboard of approved make, and top finished in approved shade of laminate. Edge to be in matching 2mm thick PVC edge binding. Supports: SS brushed finished.

Supply and Placing in Position of 15 Seater Tumor board table as per attached image below. Size: 4700 mm (L) X 900mm -2000mm ( W) Table top: 25mm thick prelaminated particleboard of approved make, and top finished in approved shade of laminate. Edge to be in matching 2mm thick PVC edge binding. Flip box on table top size as per drgs to access the switch sockets in Aluminium Anodized in approved shade with brush etc all as per detailed drawing. Supports : In Approved Metal powder coated as per detail drgs, Wire manager in fexible cable carrier vertibra of approved make.

Supply and Placing in Position of Compactor as per attached image below. Product Name - K.D Optimizer Single Static (915 mm W x 381mm D x 1980mm H) Single Last (915 mm W x 381mm D x 1980mm H) Twin Mobile 2 bay (Each bay - 915 mm W x 381mm D x 1980mm H) Rail 9’

Supply and Placing in Position of Rear Storage Unit Product Name –Finnesse HDU Storage Unit : made in 18mm thick prelam particle boards, openable shutters, adjustable shelves, approved hardwares, recessed handle all as per drgs.

Supply and Placing in Position of Recliner Chair as per attached image below. Finished in approved Leatheritte with PU moulded foam having density of 40 kg/m3.

Supply and Placing in Position of Linear workstation Size 1200mm x 600mm Table Top: 25mm thick pre laminated particle board of approved make with approved shade of laminate finished. Edges to be finished with 2mm thick matching PVC edge beading of approved make. Top Panel: 1100mm (L) x 150mm (H): Removable type soft board panel in approved shade as per floor scheme. Under Structure: MS powder coated legs 50mm x 50mm of approved design with aluminium diecast connectors, MS powder coated beam for supports Modesty Panels: Below table top: MS powder coated perforated modesty panel (575mm clear Height) with raceways. Wiremanagement: MS powder coated raceway of size 150mm x 50mm below table top and vertical tower in MS Powder coated of size 100mm x 600mm and height upto raceway for carring power and data, separator to be provided both in tower and raceways for data and power cables. Flip box on table top size 450mm x 150mm to access the switch sockets in Aluminium Anodized in approved shade with brush etc all as per detailed drawing. ACCESSORIES: Rate to be inclusive of metal powder coated mobile pedestal- 2D + 1F with numeric lock, 5 wheels support & Soft Lock system. Size 400mm (L) x 450mm (D) x 540mm (HT) Rate to be inclusive of Keyboard drawer below table top, CPU trolley Product Name : - Upbeat Recta Workstation

Supply and Placing in Position of Z Personal Lockers Unit as per attached image below. Product Name - Z Personal Lockers Unit with Cam Lock 2 Door PLU + Locker (Base) (1830H x 380W x 450D)

Supply and Placing in Position of Day Bed as per attached image below. Finished in approved Leatheritte with PU moulded foam having density of 40 kg/m3. Built with high quality spring in a hard wooden frame. Legs frame made of 304 Stainless steel External diamension - 2000mm(L) X 830mm (W) X 760mm (H) seating height 425mm to 450mm

Supply and Placing in Position of Duty Doctor Bed as per attached image below. Bed with Head board. Made up in approved prelaminated ply, necessary required M.S. Box section support system complete as per detal drgs 6 Inch Single bed Mattress and 1 no.s Pillow Set by Wakefit or equivalent. Size:- 1800mm L x 900mm W x 600mm ht

Supply and Placing in Position of Bed side table as per attached image below. Size:-450mm x 450mm x 450mm made in 18mm thick prelam particle boards, drawer unit, open shelve, approved hardwares, recessed handle all as per drgs.

Supply and Placing in Position of Foldable type Trainer Table as per attached image below Table top: 25mm thick prelaminated particleboard of approved make, and top finished in approved shade of laminate. Edge to be in matching 2mm thick PVC edge binding. Support to be with MS powder coated legs as per detail drgs with heavy duty castors, supporting on MS powder coated beams.

Supply and Placing in Position of Seminar room Lectern as per attached image below Lectern Stand consists of tilted reading top mounted on a metallic structure. A central pillar combined with a square base plate and leveling bolts at the bottom The structure is epoxy powder coated in soothing Black color and the reading top is manufactured from prelaminated wood in Beech color. All pipe ends are properly fitted with molded ABS end caps.

Supply and Placing in Position of Patient relative chair as per attached image below. Product Name – Premium Lounge single seater Size – 60.5W x 70D x 78.5H 1)SIDE FRAME ASSEMBLY: The side frame assembly should be fitted to the two ends of the connecting beam assembly to form the leg-cum-armrest assembly. 2)SEATREST ASSEMBLY: The seat rest assembly consists of a fabricated inner-frame assembly insitu-moulded High Resilience (HR) Polyurethane foam. The complete moulded seat rest assembly should be covered with a replaceable fabric upholstery cover. 3)ADJ. GLIDES: The adj. glide should be injection moulded in black Nylon & fitted to the front end of side frame assembly along with ABS moulded adj. Glide base to take should be or unleveled floor surface.

Supply and Placing in Position of Patient relative chair as per attached image below. Wooden PU finished Base and Hand Rest, PU foam infill leatheritte finished seat and back [QRO]

Supply and Placing in Position of Seminar room Stackable / Foldable Tablet Chairs as per attached image below Fly Tab : (Italian) Fix Chair Chair with PP moulded Seat & back, Foldable seat with cushion & frame in 22mm dia Stainless Steel. Supported by SS Arms with PU Cladding on Both Arms having Half writing pad in one side.

Supply and Placing in Position of Foldable type Pantry Table as per attached image below. Size 900mm dia x 750mm Table top: 25mm thick prelaminated particleboard of approved make, and top finished in approved shade of laminate. Edge to be in matching 2mm thick PVC edge binding. Supports: with Foldable mechenism made up in MS and finished in approved shade of powder coating.