Chandrapur Cancer Care Foundation Tender

Supply and Insatllation of ceramic finish Planter boxes as per attached image.

Providing and constructing low height storage of width 600mm and size as per drawings, with top, sides made up in 18 mm thick Pre-Polished Granite Stone stuck on 19mm thick commercial ply and bottom and intermediates in 19mm thick commercial ply, back in 8mm thick commercial ply, shutter in 19mm thick MDF with post formed edges. All external surfaces to be finished in approved laminate, with balancing laminate on the interior surface. Rate to include hardware such as approved locks, auto closing hinges for shutters, approved handles, door stop, tower bolt, etc. complete. MODE OF MEASUREMENT TO BE ELEVATIONAL AREA.

Providing and constructing Factory Finished Open Shelfing Storage of 450mm deep and size as per drawings, with top, sides, bottom, all vertical and horizontal intermediates in approved 710 grade marine ply of approved make as per detail drgs. with Laminate panelling in middle area .All external surfaces to be finished in approved 1.5mm thick laminate. All exposed edges to be in PVC edge binding. Rate to include all approved hardwares etc. complete. MODE OF MEASUREMENT TO BE ELEVATIONAL AREA.

Providing and fixing 600mm wide Counter with top finished in minimum 18mm thick approved shade and sample pre-polished granite slab stuck on 19mm thick marine 710 grade ply of approved make, ply shall be properly anchored and grouted into walls. Complete as per detail drgs. All exposed surfaces of platform to be finished in same granite slab. Necessary cut-outs for sink to be provided and all cutouts, exposed edges to be half round bull nosed / chamfered with mirror polished. Cost to also include making necessary cut-outs for taking pipes through counter top Cost to also include of making 100mm high raised platefrom as shown in drgs. Cost to also include making necessary cutouts for taking drainage pipes and Nahni traps in raised platform, all completed and finished to satisfactory conditions. Skirting in 1.5mm thick SS brushed sheet as per detail drgs. Cost to be inclusive of below storage unit, consisting of Openable Shutters / Drawers with necessary intermidiates per counter. Entire storage unit to be constructed with marine ply of approved make. All internal surfaces to be finished with balancing laminate and all exposed surfaces to be finished in 1.5mm thick laminate of approved shade and make, all edges in wooden beading finished in approved 2mm thick PVC edge banding as per detail drgs. Rate to be inclusive for necessary salwood frame, all required approved hardwares like dead locks with SS finished keyhole, handles, magnetic ball catches etc, complete..

Providing and fixing 600mm wide Handwash Counter with top finished in minimum 18mm thick approved shade and sample pre-polished granite slab stuck on 19mm thick marine ply of approved make, ply shall be properly anchored and grouted into walls. Supported on MS brackets @ 600mm c/c or as directed with vertical stiffeners as directed. Providing and fixing 200mm high front facia and 150mm high band above the counter top of same shade granite. All exposed surfaces of platform to be finished in same granite slab. Necessary cut-outs for wash basin to be provided and all cut-outs, all exposed edges to be half round bull nosed with mirror polished. Cost to also include making necessary cut-outs for taking pipes through counter top. Granite to be stuck on ply with approved adhesive from Ardex Endura or Latecrete or Pidlite or Saint Gobain Weber. All MS brackets will be painted with one coat of approved Zinc chromate primer and two coats of approved Enamel paint.

Providing and fixing Lift Architraves in 19mm thick Granite Stone Slab of approved shade fixed along the doors on a bed of average 25mm thick cement mortar 1:4 (1 cement : 4 coarse sand), as per detailed design and as directed, with all exposed edges Chamfered with machine mirror polishing. Stone to be secured to the backing by means of cramps/fasteners. (Exposed surface to be measured)

Supply and installation of 200mm dia Stainless Steel 304 grade Flap Lid Recessed for Counter Top Swing Garbage Can Lid of approved make and installation as per the instruction of Engineer in charge.

Manufacture, supply and installation of 10mm x 10mm "T" Sections, Matt Anodized in approved colour finished, by means of approved screws / double sided tapes or as directed.

Manufacture, supply and installation of 5mm x 15mm "D" Sections, Matt Anodized in approved colour finished, by means of approved screws / double sided tapes or as directed.

Providing and constructing overhead storage of width 450mm and size as per drawings, with top, sides and bottom in 19mm thick OSL MDF, back in 8mm thick DSL MDF, intermediate in 19mm thick DSL MDF, shutter in 10mm thick frosted toughened glass with Aluminium anodised Profile Handle of 88x22mm frame of approved make. All external surfaces to be finished in approved laminate, with balancing laminate on the interior surface. All exposed edges for intermediates to be finished in approved PVC edge binding. Rate to be include hardware such as approved locks, auto closing hinges for shutters, door stop, tower bolt, etc. complete. MODE OF MEASUREMENT TO BE SURFACE AREA OF SHUTTERS ONLY. Refer Drg No

Providing & fixing of Bed Head Panels with Metal powder coated Carcase fixed on the wall and laminate finished openable shutters. Complete as per detail drgs. Refer Drg Nos IEL-2004.1L2

Providing and constructing 600mm wide running counters with table top in 25mm thick MDF with 3mm thick PVC edge binding. The table top to be finished in approved shade 1.5mm thick laminate with 0.8mm thick balancing laminate. The table to be supported on MS brackets fixed on to walls/Partitions. The MS brackets to be painted with two coats of Enamel paint over a coat of approved Zinc chromate primer etc. The rate to include grommet for wire management etc. complete

Providing and fixing 500mm deep Vanity Counter of size as per drawing with top and Sides finished in minimum 18mm thick approved shade and sample pre-polished granite slab stuck on 19mm thick marine ply of approved make, ply shall be properly anchored and grouted into walls. Supported on MS brackets as directed with vertical stiffeners as directed. Granite to be stuck on ply with approved make adhesive . All MS brackets will be painted with one coat of approved Zinc chromate primer and two coats of approved Enamel paint.Cost to be inclusive of storage unit below handwash counter. Cost of pre-polished Granite to be Rs. per Sqm exclusive of all taxes, loading - unloading, transportation and delivered at site. Rate to be inclusive of below counter cabinate unit upto the flooring level in marine 710 grade ply and finished in approved 1.5mm thick laminate. Rate to be inclusive of necessary Metal legs 150mm at the floor level Refer detail drgs.

Providing and constructing Nurse Station of 750mm wide inclusive of table top, apron, sides, ledge, supports, drawer pedestal, finishes, skirting all as per detail drgs. Table to be finished in approved 1.5mm thick laminate.and approved Granite make Size as per Drgs

Providing and fixing Bainmarie Counter with top ledge 300mm - 350mm wide finished in approved 19mm thick polished granite stone of approved shade inclusive for all exposed edges bottom of ledge as per detail drgs. Ledge to be made up of twin 12mm thick marine of approved make. Front Apron in Masonry and Tile Finished shall be paid separately. MODE OF MEASUREMENT SHALL BE TOP LEDGE RUNNING LENGTH ONLY.

Design, fabricate, test, certify, supply, installation, field test, protection, cleaning and handover of Aluminium framed double leaf door designed to with stand a wind pressure not less than as mentioned in the technical specification. The quote includes fixtures, connectors & interface details such as watertight seals, EPDM microwave cured gaskets, fixtures, sealants, pivots, hardwares, ss floor springs, door closers, lock and any sub frame as required. Handle & finish to architects selection. All products coatings, gaskets, seals and sealants are to be asbestos free and compliance to Leed, VOC requirements. All hardware accessories, closure and fittings are to be concealed unless otherwise specified. All design shall be done to meet the performance requirement mentioned in the technical specification. 12mm thick clear fully tempered glass with 100% heat soaking Glass (Performance values to technical specification, glass as per Architect selection) Door all accessories, fittings & hardwaresas per technical specification and to architect selection. Door Size: 1) 2200 x 2450- 2 Nos

Providing and applying two coats pigmented surface Texture Paint of desired shade at all heights to give an even and uniform shade as per manufacturers specification from approved make or its equivalent. Rate shall include preparation of base surface, watering before and after application, scaffolding, tools and plants etc., complete as directed.

Providing and constructing Semi Glazed Partition consisting of Opaque Partition up to 1200mm from FFL, Glass Partition above that up to 2400mm from FFL and again Opaque Partition right up to the false ceiling consisting of the following. Rate to also include necessary gaskets at all edges of glass. Rate to be inclusive of installation of Safety film on glass at factory and removal of the film at time of handover. All measurements to be confirmed at site before execution. MODE OF MEASUREMENT TO BE PARTITION UP TO FALSE CEILING. Forsted Film on Glass to be Paid seperately.

Providing and fixing Wooden Batten of Size 50mm x 50mm Thermally treated wooden battens of required length to be fixed on the framework as directed.with necessary support from floor and ceiling level. All exposed surfaces of wood to be finished in melamine polish. Rate also to include applying one coat of fire retardant paint of approved make as per manufacturer's specifications on wooden framework.

Providing and fixing Smile board panelling with Aluminium framework of Size 50mm x 38mm section as per detail drgs. Smile Board of required size to be fixed on the 19mm thick 710grade ply on framework as directed. Rate also to include all necessary hardwares required for fixing arrangement as per manufacturer's specifications. MODE OF MEASUREMENT SHALL BE ELEVATIONAL AREA.

Providing and fixing Readymade Magnetic white board with metal beading all round of approved make of size as specified in the drawings. The rate to include chalk trays in MS powder coated as per approved sample etc. complete.

Providing and constructing low height storage of width 600mm and size as per drawings, with top, sides made up in 18 mm thick Pre-Polished Granite Stone stuck on 19mm thick commercial ply and bottom and intermediates in 19mm thick commercial ply, back in 8mm thick commercial ply, shutter in 19mm thick MDF with post formed edges. All external surfaces to be finished in approved laminate, with balancing laminate on the interior surface. Rate to include hardware such as approved locks, auto closing hinges for shutters, approved handles, door stop, tower bolt, etc. complete.

Providing and fixing 600mm wide Counter with top finished in minimum 18mm thick approved shade and sample pre-polished granite slab stuck on 19mm thick marine 710 grade ply of approved make, ply shall be properly anchored and grouted into walls. Complete as per detail drgs. All exposed surfaces of platform to be finished in same granite slab. Necessary cut-outs for sink to be provided and all cutouts, exposed edges to be half round bull nosed / chamfered with mirror polished. Cost to also include making necessary cut-outs for taking pipes through counter top

Providing and fixing Aluminum powder coated section of size 20x20mm and profile as per drawings for sides and top of partitiion. The thickness of the section to be 2mm. The channel to be kept ready to take on Glass. The powder coating to be at least 50 microns..

Providing and fixing Beachwood beading of size and profile as per drawings finished in approved melamine polish with/without architrave as shown in the drawings.

Providing and fixing 12mm thick clear toughened glass of approved make fixed on to the existing Channel sections as per drgs. Joints between Glass to be filled with clear acoustic sealant of approved make. Rate to also include necessary gaskets at all edges of glass. Rate to be inclusive of installation of Safety film on glass at factory and removal of the film at time of handover.

Providing and fixing wooden ceiling with framework in 50mm x 35mm approved seasoned hardwood section @ 600mm c/c both ways suspended from RCC slab. Panels consisting of 12mm thick plywood finished with 1mm thick laminate of approved shade and sample as per drawings. Top of the panel to be treated with anti-termite treatment and finished with 1 coat of approved colour polish. Rate to be inclusive of all kinds of profiles and cut outs required for light fixtures, Speakers, Smoke detector, trap doors and AC grill in the ceiling. Trap doors as per detailed drawings in laminate finish to be included in the rate. Rate also to include applying one coat of fire retardant paint of approved make as per manufacturer's specifications on wooden framework. Plan area to be considered for measurement, verticals will not be paid separately.