Chandrapur Cancer Care Foundation Tender

SUPPLY OF GROWTH MEDIA Vermi compost: Providing Vermi compost on site well decayed, well dried , well powdered, without clods and free from stones, dried grass, weed seeds and other rubbish material, including transport, loading-unloading, carriage and stacking at location and manner suggested by the Engineer-in-charge, with all leads and lift Complete.

MIXING, FILLING & SPREADING OF GRWOTH MEDIA Mixing of Growth media i.e. Garden soil and Vermicompost in 8:1 proportion thoroughly,Filling the same in the planter bed flooding with water, Refilling with growth media if necessary, watering and finally fine dressing, levelling etc. as directed by the Engineer-in-charge, including stacking and disposal of materials declared unserviceable, within a lead of 10 km, lift complete.

SUPPLY ,PLANTING AND MAINTAINACE OF PLANT SPECIMEN TREES Supply of healthy sapling, vigorous specimen, well shaped, healthy fronds and well established and Planting of plant specimen including, loading, unloading of plant from project area to desired locations,support stacking guying, basin preparation for irrigation,watering and removal of unserviceable material’s as per direction of Engineer-in-charge Including lifting, loading, unloading of plant to Project site and maintaince of plants in healthy conditions till plantation. (excluding cost of plant & water)etc. Maintaining till handover by cleaning, watering, weeding, pruning ,stirring of soil, staking, replacing casualties etc. Complete. Note: 1. Plantation included SIX months casuality replacement (Free of cost). 2. Water source shall be provide by client. TREE SPECIMEN Height-2000-3000 Canopy-900-1200 Stem dia- 50-75 mm DBH Clear Stem ht-1200

SHRUBS Supply of healthy sapling, vigorous specimen, well shaped, properly branched and well established and Planting of shrub specimen including, loading, unloading of shrub from project area to desired locations, support stacking guying, basin preparation for irrigation, watering and removal of unserviceable material’s as per direction of Engineer-in-charge Including lifting, loading, unloading of plant to Project site and maintaince of plants in healthy conditions till plantation. (excluding cost of plant & water)etc. Maintaining till handover by cleaning, watering, weeding, pruning ,stirring of soil, staking, replacing casualties etc. Complete. Note: 1. Plantation included SIX months casuality replacement(Free of cost). 2. Water source shall be provide by client. TALL HEIGHT SHRUB PLANTATION Height:750-900 Canopy:450-600

SHRUBS Supply of healthy sapling, vigorous specimen, well shaped, properly branched and well established and Planting of shrub specimen including, loading, unloading of shrub from project area to desired locations, support stacking guying, basin preparation for irrigation, watering and removal of unserviceable material’s as per direction of Engineer-in-charge Including lifting, loading, unloading of plant to Project site and maintaince of plants in healthy conditions till plantation. (excluding cost of plant & water)etc. Maintaining till handover by cleaning, watering, weeding, pruning ,stirring of soil, staking, replacing casualties etc. Complete. Note: 1. Plantation included SIX months casuality replacement(Free of cost). 2. Water source shall be provide by client. MEDIUM PLANTATION IN POT Height:450-750 Canopy:200-450

SHRUBS Supply of healthy sapling, vigorous specimen, well shaped, properly branched and well established and Planting of shrub specimen including, loading, unloading of shrub from project area to desired locations, support stacking guying, basin preparation for irrigation, watering and removal of unserviceable material’s as per direction of Engineer-in-charge Including lifting, loading, unloading of plant to Project site and maintaince of plants in healthy conditions till plantation. (excluding cost of plant & water)etc. Maintaining till handover by cleaning, watering, weeding, pruning ,stirring of soil, staking, replacing casualties etc. Complete. Note: 1. Plantation included SIX months casuality replacement(Free of cost). 2. Water source shall be provide by client. SMALL PLANTATION IN POT Height:200-450 Canopy:100-200

SUPPLY AND LAYING OF LAWN Providing and laying of Selection no. 1 grass turf in ready slab form with earth 50mm to 60mm thickness on plantation bed and maintained by moving,weeding,watering etc.complete up to six month including casuality replacement. Korean carpet ready slab

LIGHT FIXTURE WORK [PFS] PATH FINDERS Type: Path Finders HSN Code : 9405 Aluminium dia Cast black finished,10W,,Epistar Led/IP 66,10W,CCT 5700K,IK10

[UWL] UNDER WATER LIGHT HSN Code : 9405 IP 68,9W,3000K 12v dc with Osram/Philips driver

[FLI] FLOOD LIGHT HSN Code : 9405 Osram make 50w 3000k with GI Pole 4000mm

[UDL] UP DOWN LIGHTER HSN Code : 9405 SS fixture,SS finished,5Wx2,Osram Led

LIGHT FIXTURE WORK [SLI] SPIKE UP LIGHTER HSN Code : 9405 Philips make IP 65,7W,3000K

[LPL] LAMP POST LIGHT HSN Code : 9405 Aluminum Dia cast body 45w 3000k osram led phillips driver 400mm dia with GI Pole 4000mm

M.S RAILLING Size:Height 950mm

WATER FEATURE Size:Dia 2400mm

EARTH WORK Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness.

EARTH WORK Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means

Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc.

Filling in plinth and floors with approved excavated material in 15cm. to 20cm. layers including watering and compacting etc. complete.

RANDOM RUBBLE SOLING Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete.

PLAIN CEMENT CONCRETE Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

BLOCK WORK Providing fly ash brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete

ROUGH CEMENT PLASTER Providing rough cast cement plaster externally in two coats to concrete, brick or stone masonry surfaces in all positions with base coat of 12 to 15 mm thick in C.M. 1:4 and rough cast treatment 12mm thick in proportion 1:1 1/2:3 including scaffolding and fourteen days curing complete.

R.C.C WITH WATER PROOFING Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting , curing , finishing and rougheningthem if special finish is to be provided and curing complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing and laying damp proof course 50 mm thick in M20 cement concrete layer and bitumen /using cement with waterproofing compound curing, formwork etc. complete.

Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1Kilogramper bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300mm x 300 mm. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/- including ponding test etc. complete.

Providing and Laying factory made coloured chamfered edge Cement concrete grass paver blocks of required strength,thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of fine fine aggregate (natural sand/crushed sand VSI grade finely washed etc.), compacting and proper embedding/laying of inter locking paver blocks into the fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) and cutting of paver blocks as per required size and pattern, finishing and sweeping extra fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) and complete as per manufacturer spsecifications & direction of Engineer-in-Charge. 60mm thick CC paver block of M-35 grade concrete with approved colour and design & pattern.

POLISH KOTA STONE Providing and laying machine cut machine polished machine cut Kota stone slabs 20 to 25 mm thick for treads and risers of steps and staircases, with rounded nosing for the treads on a bed of 1:4 cement mortar including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete.

PAINT Providing and applying two coats of textured synthetic paint of approved shade and quality and one coat of primer before applying textured paint including scaffolding if necessary preparing surface by thoroughly cleaning oil, grease, dirt and other materials as required, etc. complete.

Providing and applying two coats of exterior acraylic emulsion paint confirming to corresponding I.S. of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface, applying primer coat ,scaffolding if necessary , and watering the surface for two days etc complete.

SITE PRELIMENARIES SITE CLEARING Clearing grass and removal of rubbish up to a distance of 50 metres outside the periphery of the area .

EXCAVATION Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 3.00 m.) By Manual Means

KERB STONE Providing and casting in situ or precast tapering R.C.C. M-20 Barrier type Kerb without gutter ( as per IRC 86 1983) embedded 125mm below ground level over M-10 PCC finished neatly with C.M. 1:2, setting the same in C.M. 1:2, including the required excavation in any strata and removing the excavated stuff any where in city and redoing the surface as specified and directed by Engineering In-charge. Using Concrete Batching and Mixing Plant

Providing and laying vitrified rustic matt stone finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm to 8 to 10mm thickness and confirming to IS. 15622-2006 (Group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and cleaning. etc. complete.

Providing and laying machine cut machine Polished Kota stone flooring 25mm to 30mm thick and required width in plain/ diamond pattern on bed of 1:6 C. M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete.

Providing and fixing 900mm high S.S.304 Grade Stainless steel railing with 40mm diameter and 1.5mm thick at top,40mm diameter and 1.5mm thick vertical supports spaced at 1.5m center to center and 8mm thick toughened glass including fabricating ,fixtures, errecting , necessary welding , grinding , finishing, buffing to stainless steel pipe etc. complete

Providing and laying in situ / ready mix 1:4:8 cement concrete of trap /granite /quartzite /gneiss metal for haunch filling including compacting, curing, mixing etc. complete. (with fully automatic micro processor based PLC with SCADA enabled with reversible drum type mixer/ concrete batch mix plant (pan mixer) with fine agreegates of required specifications ( VSI sand finely washed etc )

Providing and filling sand in foundation trenches / below Raft as per drawing and technical specifications etc. complete. (Coarse Sand and Gravel )