Centre For Materials For Electronics Technology Tender

CATEGORY: Roll to Roll Coating machine (For Anode)

CATEGORY: Calendaring Machine (For Anode)

CATEGORY: Winding Machine for Jelly Roll

CATEGORY: DEVELOPMENT COST OF O RING MS29513-234 , PROTOTYPE COST OF O RING MS29513-234 , IOQ COST OF ORING MS29513-234 , DEVELOPMENT COST OF O RING MS29513- 227 , PROTOTYPE COST OF O RING MS29513-227 , IOQ COST OF O RING MS29513-227 , DEVELOPMENT COST OF O RING MS29513-211 , PROTOTYPE COST OF O RING MS29513-211 , IOQ COST OF O RING MS29513-211 , DEVELOPMENT COST OF O RING MS 29513-215 , PROTOTYPE COST OF O RING MS29513-215 , IOQ COST OF O RING MS29513-215 , DEVELOPMENT COST OF O RING MS29513-230 , PROTOTYPE COST OF O RING MS29513-230 , IOQ COST OF O RING MS29513-230

CATEGORY: INSERT CNMG 12 04 04 PM 4025 HMAKE: SANDVIK/CERATIZ/WIDIA ORSUBSTANTIALY EQUIVALENT OF OTHER MAKES.

CATEGORY: Automatic and Semi Automatic Welding Equipment with Self Adjusting Arcs MIG / MAG as per IS 7931 (Part 1, Part 2 and Part 3) (Q2) , Tungsten Inert Gas (TIG) Welding Equipment as per IS 9604:1994 (Q2) , Portable Single Operated Rectifier Type DC Arc Welding Set Suitable for Manual Arc Welding Process as per IS 4559 (Q2)

CATEGORY: Custom Bid for Services - LOMA SAW MACHINE SWARF DUCT AND ALUMINIUM CHIPS COLLECTION STRUCTURE REPAIRING AND MODIFICATION WORK FOR OJ4440 IN FOUNDRY SECTION DETAIL SCOPE OF WORK AS PER ANNEXURE ATTACHED MM FDY PV 06 24

CATEGORY: PESO Approved combo valves with integrated actuators, EFCV and OPD device

Seal Part No Eea0015404 Snr 1 Ug,seal Part No Eea0015404 Snr 2 Ug,seal Part No Eea0015404 Snr 3 Ug,

CATEGORY: Repair and Overhauling Service - FIREMAIN PUMP NO 3; JYOTI PUMP; Yes; Buyer Premises, Service Provider Premises

CATEGORY: compression springs for sm hydra make stud tensioner part no-30 as per dwg no p 617-0-0 , high pressure steel wire braided rubber hose flexible and reinforced for oil supply pump to stud tensioner both side end fitting with three eight inch hose length 80 feet , high pressure steel wire braided rubber hose flexible and reinforced for oil supply pump to stud tensioner both side end fitting with three eight inch hose length 70 feet , high pressure steel wire braided rubber hose flexible and reinforced for oil supply pump to stud tensioner both side end fitting with three eight inch hose length 10 feet , high pressure steel wire braided rubber hose flexible and reinforced for oil supply pump to stud tensioner both side end fitting with three eight inch hose length 18 feet , high pressure steel wire braided rubber hose flexible and reinforced for oil supply pump to stud tensioner both side end fitting with one fourth inch hose length 10 feet , high pressure steel wire braided rubber hose flexible and reinforced for oil supply pump to stud tensioner both side end fitting with one fourth inch hose length 18 feet

CATEGORY: Custom Bid for Services - Rate Contract for Repair or Refurbishment of Main Dewatering Pump Motor of Dry Dock for a Period of One Year for Yard Services Department at Naval Dockyard Mumbai

CATEGORY: LV1/R72 172.45. 018.3 SHAFT

CATEGORY: ARM DK-30 AUTOMATED WORKING PLACE

CATEGORY: COLD REPAIR MACHINE , COLD REPAIR MACHINE INSTALLATION COMMISSIONING

CATEGORY: Single Row Deep Groove Ball Bearing (Without Flange Outer Ring) as per IS 6455 (Q3)

CATEGORY: WATER MANIFOLD-1 AS PER DRAWING , WATER MANIFOLD 2 AS PER DRAWING , LH LIMIT SWITCH PLATE AS PER DRAWING , RH LIMIT SWITCH PLATE AS PER DRAWING , TOP LIMIT SWITCH PLATE AS PER DRAWING , BOTTOM LIMIT SWITCH PLATE AS PER DRAWING , HOSE CONNECTOR 1 ET L238 M3 BY 8 F1 BY 4 AS PER DRAWING , HOSE CONNECTOR 2 ET L195 M3 BY 8 F1 BY 4 AS PER DRAWING , HOSE CONNECTOR 3 ET L138 M3 BY 8 F1 BY 4 AS PER DRAWING , HOSE CONNECTOR 4 AS PER DRAWING , HOSE CONNECTOR 5 AS PER DRAWING , BAFFLE AS PER DRAWING , COOLANT HOUSING ASSY ET K152 N153 A3 , COOLANT HOUSING ASSY ET K152 N203 A3 , COOLANT HOUSING ASSY ET K152 N204 A2 , COOLANT HOUSING ASSY ET K228 N213 A2 , COOLANT HOUSING ASSY ET K234 N225 A3 , COOLANT HOUSING ASSY ET K191 N240 A3 , COOLANT HOUSING ASSY ET K191 N230 A3 , COOLANT HOUSING ASSY ET K191 N220 A3 , COOLANT HOUSING ASSY ET K191 N212 A3 , COOLANT HOUSING ASSY ET K191 N204 A3 , COOLANT HOUSING ASSY AS PER DRAWING

CATEGORY: Manual Suction Unit (V2) (Q2)

High Density Graphite Rod Diameter 60 mm X 12 inch , High Density Graphite Rod Diameter 4 inch X Length 12 inch ,

CATEGORY: Siemens CNC System package 808D advanced or equivalent with electrical material. , Ball screw assembly with end fitting. , Electrical and Mechanical refurbishing of machine.