Central Railway Tender
Search from over 12139+ business opportunities that have been announced from the biggest Mahatenders, e tender Maharashtra, Maharashtra government tenders, and the Online Tender Notices posted on Maharashtra e tenders till date. Find opportunities that have come in from the multiple corporations, Maharashtra government departments, State PSUs, and Private companies from the state.
Central Railway Tender
Civil And Construction
Civil Works Others
Telecommunication Services
Ireps
Opening Date9 Dec 2024
Closing Date20 Jan 2025
Tender Amount₹ 9,63,22,192.78
Costs
EMD
₹ 6,31,600Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
CR-PA-SNT-WKS-S-2024-11-PUNE DIVISION-S AND T/CENTRAL RLYTender No
CR-PA-SNT-WKS-S-2024-11Tender Authority
Central Railway ViewPurchaser Address
-Website
http://ireps.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Supply of Relay Rack Assembly complete with scaffolding, fixtures and accessories including MS Bars for fixing of relay plug board, string rods, fuse strips with bracket, 11 Way Bus Bars 5 with cover and mounting brackets, runway for cable/wires, frame, base assembly etc. Siemens type & as per extant practice on C. Rly. Typical part list as per item no.3.2 of Chapter-III and Rack arrangement as per Sketch no SK-727 and Rack plan as approved by Engineer in charge. (Inspection by Consignee)
6
41655
249931.38
... More
Supply of Tag Blocks 200/160/120 way with polycarbonate cover as per IRS S 77- 2006(Rev.1) RDSO DRG. No. SA 24751, SA 24752 & SA 24753. Requirement of each type shall be specified by Engineer-in-charge.(Inspection by Consignee)
120
1669
200347.2
... More
Supply of Main Cable Termination rack complete with scaffolding, fixtures & 7 accessories including square bars for mounting 8-way terminal blocks, ladder, string rods, frame, base assembly, insulators, J bolt, nut/bolts & fasteners, backelite sheet, etc. Siemens type and as per extant practice on Central Railway. Typical part list as per item no.3.3 of Chapter-III and rack arrangement shall be as per sketch No. SK-727 with latest alterations.(Inspection by Consignee)
4
35876
143506.88
... More
Supply of Data logger for monitoring status of important relays, complete with Processor Module to monitor following inputs as per spec. RDSO/SPN/99/2006 Spec. No.: IRS-S- 99/2006 (Amdt-3) with latest amendments including power supply of adequate capacity, battery and fault diagnostic software for failure analysis. Complete data logger & Processor Module (computer) as per item no.3.4 of Chapter-III shall be placed in President rack of suitable size to be supplied. This also includes supply of one no composite computer & printer table (work station table- Gorej/Durian/Transteel) for keeping Processor module and one no Godrej/Durian/Transteel make operator chair. (i) 2560 digital and 32 analog inputs(Inspection by RDSO) 9
1
1267168
1267168.19
... More
Failure analysis software for 2560 digital inputs(Inspection by Consignee)
1
117987
117987.57
... More
Supply of PVC Indoor Cable 1x60x0.6mm dia Colour coding of insulation of inner core shall be in six colour viz Blue, Red, Grey, Green, Brown & Black conforming to IRS 76/89 (Amd.3) or latest.(Inspection by RDSO)
2
354797
709594.92
... More
Supply of PVC Indoor Cable 1x40x0.6mm dia Colour coding of insulation of inner core shall be in eight colour viz Blue, Red, Grey, Green, Brown, Black, Yellow & White conforming to IRS 76/89 or latest.(Inspection by Consignee)
2
232755
465510.94
... More
Supply of Indoor Jumper Wire of various colour as per Railways standard practice of type ATC 1 x 0.6 mm dia.conforming to IRS 76/89 (Amd.3) or latest.(Inspection by Consignee)
25
10204
255107.5
... More
Supply of Indoor Jumper Wire ATC 1 x 1 mm dia. conforming to IRS 76/89 (Amd.3) or latest.(Inspection by Consignee)
10
15450
154503.8
... More
Supply of PVC flexible copper cable single core multistrand 1 x 2.5 Sq.mm (50 14 conductor each diameter 0.25 +/- 0.01) as per IS 694/2010 with latest amendment if any with insulation thickness of 0.70mm nominal conductor resistance 7.98 ohms/Km and test parameters are as per IRS (S)76/89 (Amd.3).(Inspection by Consignee)
2
52599
105198.54
... More
Supply of PVC flexible copper cable single core multistrand 1 x 6 Sq.mm (84 conductor 15 each diameter 0.30 +/- 0.01) as per IS 694/2010 with latest amendment if any.with insulation thickness of 0.80mm nominal conductor resistance 3.30 ohms/Km and test parameters are as per IRS (S)76/89 (Amd.3).(Inspection by Consignee)
1
108108
108108.43
... More
Supply of PVC flexible copper cable single core multistrand 1 x 10 Sq.mm (80 16 conductor each diameter 0.40 +/- 0.01) as per IS 694/2010 with latest amendment if any.with insulation thickness of 1.0mm nominal conductor resistance 1.91 ohms/Km and test parameters are as per IRS (S)76/89 (Amd.3).(Inspection by Consignee)
2
166449
332899.94
... More
Supply of PVC flexible copper cable single core multistrand 1 x 16 Sq.mm (126 17 conductor each diameter 0.40 +/- 0.01) as per IS 2465/1984 & IS:694/2010 with latest amendment if any with insulation thickness of 1.0mm nominal conductor resistance 1.121 ohms/Km and test parameters are as per IRS (S)76/89 (Amd.3).(Inspection by Consignee)
1
247715
247715.39
... More
Supply of PVC flexible copper cable single core multistrand 1 x 25 Sq.mm (196 18 conductor each diameter 0.40 +/- 0.01) as per IS 2465/1984 & IS:694/2010 with latest amendment if any with insulation thickness of 1.2mm nominal conductor resistance 0.780 ohms/Km and test parameters are as per IRS (S)76/89 (Amd.3).(Inspection by Consignee)
1
384935
384935.43
... More
Supply of wire 16/0.2 (Blue, Red, Grey, yellow, Brown, Black, White as per site engineer instruction) finolex/polycab/delton make. IRS S-76/89 (Amd.3), BS: 4808 Part-2. Wire to be procured from RDSO approved vender.(Inspection by Consignee)
50
7605
380265
... More
Supply of low maintenance Lead Acid Secondary Cells 2V 80 AH as per spec. IRS 88/2004 with latest amendments.(Inspection by RDSO)
130
2356
306364.5
... More
Sealed maintenance free VRLA Battery/Cell 2 Volt, 300AH IRS : S-93/96 (A) (Amd.1) or latest.(Inspection by RDSO)
55
5947
327096
... More
Supply of Transformer 230V/110V-130V Single Phase 2 KVA as per spec. IRS S-72/88 (Amd.2) with latest amendments.(Inspection by Consignee)
2
12834
25669.1
... More
Supply of Track Feed Transformer 230V/110V-130V Single Phase 3 KVA single phase as per spec. IRS S-72/88 (Amd.2) with latest amendments.(Inspection by Consignee)
-
-
23
... More
Supply of Battery Charger self regulating floor mounting type with 230 V AC single phase input and output 60 V DC, 40A as per spec. IRS.S.86/2000(Amd.4) with latest amendments. (Inspection by RDSO)
2
154343
308687.22
... More
Supply of Battery Charger self regulating floor mounting type with 230 V AC single phase input and output 110 V DC, 40A as per spec. IRS.S.86/2000 (Amd.4) with latest amendments. (Inspection by RDSO)
2
110710
221420.36
... More
Supply of Battery Charger self regulating floor mounting type with 230 V AC single phase input and output 24 V DC, 30A as per spec. IRS.S.86/2000 (Amd.4) with latest amendments. (Inspection by RDSO)
10
37869
378693.6
... More
Supply of Rubber Mat 5mm thick for use in signalling installation.(Inspection by Consignee)
100
152
15285
... More
Supply of 100 Amps., 4 pole change over switch with sheet steel enchoser type, 415V operational voltage, 50/60 Hz. Make Siemens/L &T /HAVELLS/LEGRAND make.(Inspection by Consignee)
3
5833
17499.48
... More
Supply of Auto Signal Block Proving Relay Group Siemens make [No. A-RT-RG-A056] or functional equivalent without base plates.(Inspection by RDSO)
6
62848
377092.98
... More
Supply of Metal-To-Metal Universal LED type ECR Siemens make (type A-RT-RG-A064) or functional equivalent without base plate, should be suitable for working with LED based signal lighting unit. IRS:S:46 & STS/E/RELAYS/AC LIT LED SIGNAL/09-2002 Amd.1.(Inspection by RDSO)
20
8169
163385.4
... More
Fail safe Electronic Time delay unit (Plug in type) to operate 24V DC with only one fixed time setting of 30@47<47@120 seconds as per RDSO Specification No. IRS-S-61/2000 with Amendment No.3 or Latest.(Inspection by Consignee)
42
4686
196832.58
... More
Supply of QNA1-K AC immunised relay, 8F-8B, 24VDC along with plug board, retaining clip and connectors conforming to BRS:931A & RDSO letter no.STs/E/Relays/ UEA/PI dated 30.05.97 Annexure-II IRS:S60,IRS:S34 & IRS:S23. (Inspection by RDSO)
20
4837
96759.2
... More
Supply of QNA1-K AC immunised relay, 12F-4B, 24VDC along with plug board, retaining clip and connectors conforming to BRS:931A & RDSO letter no.STs/E/Relays/ UEA/PI dated 30.05.97 Annexure-II IRS:S60,IRS:S34 & IRS:S23. (Inspection by RDSO)
15
4728
70926
... More
Supply of QNA1 AC immunised relay, 8F-8B, 24 VDC along with plug board, retaining clip and connectors confirming to BRS : 931A, IRS:S60, IRS:S34 & IRS:S23(Inspection by RDSO)
45
4545
204559.65
... More
Supply of QSPA1 relay, 24VDC, slow to pick up, 8F-4B, along with plug board, retaining clip and connectors conforming to BRS:933A, IRS : S60, IRS:S34 & IRS:S23(Inspection by RDSO)
42
5209
218804.04
... More
Supply of QTA2 AC immunised track relay, 9 Ohm, 2F.1B, along with plug board, retaining clip and connectors conforming to BRS:939A, 966 & Appendix F2, IRS:S34 & IRS:S23(Inspection by RDSO)
42
4554
191292.78
... More
Supply of QBAT track Relay, AC immunised, 2F-2B contacts, 9 ohms. complete with plug board, retaining clip & connectors as per RDSO / SPN/84 Ver 2.0 or latest.(Inspection by RDSO)
8
7792
62339.76
... More
Supply of Universal LED Lamp proving relay QECX61 relay, 4F-4B,AC conforming to BRS:941A STS/E/RELAYS/AC LIT LED SIGNAL/09-2002, Amdt.-1 (FOR ALL ASPECT ECR FOR AC LED SIGNAL)(Inspection by RDSO)
20
4394
87887.4
... More
Supply of QBCA1 AC immunised relay, 2FHD 4F-4B,24VDC along with plug board, retaining clip and connectors conforming to BRS:943 POINT CONTACTOR RELAY and IRS S46. firms specification.(Inspection by RDSO)
25
5589
139734.5
... More
Supply of QL1 LATCH relay, 11F-4B or 8F-6B along with plug board, retaining clip and connectors conforming to BRB:935A. (Inspection by RDSO)
-
-
40
... More
Supply of Key Lock Relay with different ward combinations (Three extra set of ward 41 plate for Point Machine to be supplied with each relay). Siemens Make working on 60V DC/24V DC or functional equivalent without base plates. RDSO/SPN/219/ 2016 Version 1.0 d 1(Inspection by Consignee)
18
10792
194259.6
... More
Supply of Fail Safe Electronic Flasher Device 24V DC or 60V DC as per RDSO spec No.:RDSO/SPN/173/2002 amendment 2 or latest.(Inspection by Consignee)
1
21198
21198.92
... More
Supply of Desk type Electronic Magneto Telephone as per spec No IRS TC-79/2000 (Amd.4) or with latest amendments.(Inspection by Consignee)
10
3873
38739.8
... More
Supply of Test Board & Circuit progress board for relay room as per Drg No RST/C/105 A&B.(Inspection by Consignee) 45
1
14820
14820.68
... More
Supply of INDICATIVE TYPE OF FUSE INSERTS. IRS S:78-92 (Inspection by Consignee)
-
-
268776
... More
Supply of Resisters, condensers, Diodes, LEDs and lugs alongwith bracket and mounting arrangement as per item no.3.5 of Chapter-III of Central Railway. (Inspection by Consignee)
1
65535
65535.41
... More
Resin cored wire as per specification No. IS:1921-1975 with Alloying element percentage as 63% SN (Tin) and / 37% Pb (Lead) with percentage of various impurities not exceeding 47 the values Sb (Antimony) 0.2% maximum , Cu (Copper) 0.1% maximum, As (Arsenic) 0.05% maximum, Fe (Iron) 0.02% maximum & other impurities mainly Al, Zn & Cd shall be limited. The flux shall be free from corrosive action as per clause 5.2 & flux percentage may be used as per requirement.(Inspection by Consignee) 48
100
1478
147804
... More
Lacing thread rolls, black, wax coated (100 mtrs).(Inspection by Consignee)
200
78
15612
... More
Fabrication and supply of Board made of White sunmica sheet over 12 mm thick particle/laminated/ wooden board covered with 5 mm thick perspex transparent sheet in aluminium/ steel frame and Painting of SWR/Track insulation plan etc.(Inspection by Consignee)
50
8618
430907.5
... More
Design, fabrication and supply of Fuse Auto Changeover System for 32 Nos. of external 50 non-deteriorating type fuses or 'G' type fuses from 0.6A Amp to 4A Amp capacities used in signalling circuits. System shall have 8 cards with monitoring arrangement of 4 fuses in one card. As per RDSO Spec. RDSO/SPN/209/2012 Ver.2.0 or latest amendment if any.(Inspection by RDSO) (Unit may be read as No. of modules)
16
505233
505233.12
... More
Design, fabrication and supply of Fuse Auto Changeover System for 24 Nos. of external 51 non-deteriorating type or 'G' type fuses from 4 A to 10 Amp capacities generally used for point operaton circuits. System shall have 6 cards with monitoring of 4 fuses in one card. As per RDSO Spec. RDSO/SPN/209/2012 Ver.2.0 or latest amendment if any.(Inspection by Consignee) (Unit may be read as No. of modules)
6
286834
286834.74
... More
Supply of Main Signal Post 140 mm outer dia 4.6 Mtr Length as per spec No IRS S 6/81 with latest amendments.(Inspection by Consignee)
4
8199
32796.92
... More
Supply of Main Signal Post 140 mm outer dia 5.6 Mtr Length as per spec No IRS S 6/81 with latest amendments.(Inspection by Consignee)
16
10895
174326.56
... More
Supply of Shunt Signal Post with Base (GI Pipe of 80 mm Dia of min. 1 meter length.). (Inspection by Consignee)
8
3199
25599.84
... More
Supply of Cast Iron Main signal surface base 140mm as per spec No IRS S-10 and Drg 55 No 2011/M with latest amendments, with CLS Ladder assembly complete for CLS signal 5.5/4.5/3.5mtrs long as per RDSO Drg. No. SA-23156(Adv), SA-23153 (Adv) & SA-23150 (Adv) Alt. 1 respectively with Latest Amendment as the case may be for CLS unit & signal back staging as per extent C. Rly practice.(Inspection by Consignee)
20
10660
213205.2
... More
Supply of Cast iron Shunt signal surface base 80 mm as per spec No.IRS S 10 and Drg No.2011/M with latest amendments, as per RDSO Drg No. SA-23156/Drg.No.RST/11413 as per extent C.Rly practice(Inspection by Consignee)
8
2444
19558.16
... More
Supply of Signal No.plates. as per Drg No RST-11393 / SK-842(Inspection by Consignee)
28
615
17236.52
... More
OFF set bracket 5-1/2 " to suit 140 mm dia CLS Post with two no. of "U" Bolts with nut & washer complete as per RDSO Drg.No.SA-23080 for Signals & Routes(Inspection by Consignee)
4
1179
4718.76
... More
OFF set bracket 3-1/2' for signals & routes. Drawing No. SA 23840 (Adv) Alt-2 as per extent C. Rly practice.(Inspection by Consignee)
4
6247
24991.92
... More
Supply of A/AG/C/P/G/IB Board as per Drg. RST-11444/1(A), RDSO Drg No SA 23460(AG), SA-23461©, RST-11445. SA 23456(P), SA 23477(G) & SA 23476-77(IB) as applicable respectively with Latest Amendment.(Inspection by Consignee)
10
662
6628.5
... More
Supply of Stop Board/IB Board as per RST-11791 (STOP BOARD)/ RDSO Drg No.7235/B as per extent C.Rly practice.(Inspection by Consignee)
12
3941
47295.96
... More
Supply of different warning Boards as per Goods Warning Board (SK-784). RDSO Drg N o . SA 2380 (Adv), SA 2370/M, Block section limit Board RDSO Drg.No. SA 2373 Paint and retroreflective arrangement as per Railways drawing.(Inspection by Consignee)
4
3837
15349.76
... More
Supply of Hand Cuff Locks/ Godrej Navtal lock with Three common keys.(Inspection by Consignee)
100
337
33772
... More
Supply of "2 Aspect" Signal Unit in FRP body without lenses and transformers as per 64 RDSO Specification RDSO/SPN/194/2006/Rev.2.0 or latest complete and to suit LED signal Lamps and suitable for 140 mm dia post Saves pigment finish on the back side of the end inside. White Pigment finish inside the 2 aspect unit to avoid any extra paint cost.(Inspection by RITES)
6
36508
219051
... More
Supply of "4 Aspect" Signal Unit in FRP body without lenses and transformers as per 65 RDSO Specification RDSO/SPN/194/2006/Rev.2.0 or latest complete and to suit LED signal Lamps and suitable for 140 mm dia post Saves pigment finish on the back side of the end inside. White Pigment finish inside the 4 aspect unit to avoid any extra paint cost.(Inspection by RITES)
14
48408
677725.72
... More
Supply of Shunt Signal Position Light Type FRP complete as per RDSO Specification 66 No.RDSO/SPN/ 194/2006/Rev.2.0 or latest with Off set bracket 3-1/2" to be fitted on 140 mm post drawing No. SA 23840(Adv) Alt-2 for dependent type complete with signal unit bracket, terminals etc without lenses, lamp, lamp holder, and to suit LED Signal lamps.(Inspection by RITES)
8
16461
131690.56
... More
Supply of 2 way Junction Route Indicator in FRP body without lenses and transformers as per RDSO Specification RDSO/SPN/194/2006/ Rev.2.0 or latest complete and to suit LED signal Lamps.(Inspection by Consignee)
4
52429
209719.04
... More
Supply of "Calling On" Signal Unit in FRP body without lenses and transformers as per RDSO Specification RDSO/SPN/194/2006/Rev.2.0 or latest complete and to suit LED sigal Lamps. (Inspection by Consignee)
3
10230
30690.93
... More
Supply and Fixing of RE Protective Screens of expanded metal 12 SWG of size 1200 x 1500 mm on signals as per extant practice & as per instruction of Rly engineer at site. DRG.No.SK- 844.(Inspection by Consignee)
5
6168
30840.8
... More
Supply of Phenolic 10mm thick sheet, grade P3 in standard size of 1.22X1.22 Mtr as per spec. No IS 2036 of 1995.(Inspection by Consignee)
60
6195
371734.2
... More
Supply of ARA Terminal blocks with links made of PBT Specn No.IRS/75/2006(Rev-2) with latest amendments and RDSO Drg.No.SA-23741A Alt.4, SA-23745 Alt.5, SA-23746, SA-23748 Alt.4 & SA-23756A Alt.3.(Inspection by RDSO)
10000
85
856800
... More
Supply of cartridge fuse block made of PBT as per RDSO Drg No SA-23748 Alt 4, SA- 23749 & Spec No IRS S 75/2006 with latest amendment. Fuse block shall be suitable for round head type voltage fuses.(Inspection by RDSO)
500
192
96135
... More
Supply of round head type non detoriating type low voltage cartridge fuse as per Specn No IRS/S/78/92 with latest amendments 2A/4A/6A capacity(Inspection by RDSO)
500
82
41375
... More
Supply of Tik-tak, piano type switches,5 A (as per IS Specification).(Inspection by Consignee)
60
39
2365.2
... More
Supply of three pole plug and socket 5 Amp (as per IS Specification).(Inspection by Consignee) 76
60
272
16344.6
... More
Supply of Lamp 110V/24W, 2 Pin for Loc. (Inspection by Consignee)
60
26
1609.2
... More
Supply of Apparatus Case with godown locks with detachable handle on both the doors. (i) Single Case as per Drg. No.SK 783-1 & 2 with latest alteration.(Inspection by RITES)
50
18903
945183
... More
Supply of Apparatus Case with godown locks with detachable handle on both the doors. (ii) Half Case as per Drg. No.SK 783-1 & 2 with latest alteration.(Inspection by RITES)
20
15167
303353
... More
Supply of earth electrode assembly as per Drg.No. CR/S&T/SK-815(Inspection by Consignee)
120
1272
152655.6
... More
Maintenance Free Earth as per RDSO/SPN.197/ 2008 or latest consisting of : 1) Copper 80 bond steel electrode 3 Mtr long 17mm dia with copper bonding thickness of min. 250 micron & UL listed & marked-01 No. 2) Earth enhancement compound RDSO Approved in sealed bag of 10 Kgs - 03 No. 3) Copper strip 150 x 25 x 6mm - 02 No. 4) Copper strip 300 x 25 x 6mm - 01 No. 5) 35 Sqmm Copper Cable to connect earth electrode to MEEB - 15 Mtr Approx.(Inspection by RDSO)
38
20987
797539.06
... More
Supply of Microprocessor based universal earth resistance sensing unit 12 channel AC/DC as per RDSO/SPN/256/2002 with latest amendments.(Inspection by Consignee)
2
171839
343678.66
... More
Supply of Track Lead Junction Boxes as per C.Rly Drg. No.RST 11509 made from fiiber glass alongwith terminal blocks.(Inspection by Consignee)
200
1236
247324
... More
Supply of B type choke to specn.No.IRS.S.65/83 (Amd.3) with latest amendments. (Inspection by Consignee)
30
4326
129788.7
... More
Supply of adjustable Track Feed Resistance disc type 7.5/15/30 ohms as per RDSO Drg. No. SA 20161-66/M (Adv) with latest amendments (with Phenolic moulded base).(Inspection by Consignee)
30
1520
45600.3
... More
Supply of Track feed battery chargers, 110V AC input 2, 4 to 6 V DC Output to Specn.No.IRS.89/2013 Ver.1.0 with latest amendments. Charger shall be suitable for charging 80 AH battery.(Inspection by Consignee)
30
2867
86032.5
... More
Supply of Channel Pins single groove, galvanised, 7 mm suitable for 4mm dia bonding wire as per spec No. IRS: S 17-75 Revision 3.(Inspection by Consignee)
7000
2
16590
... More
Supply of PVC jacketed wire rope for Track Lead connections. PVC jacketed wire rope 87 should be of Galvanised steel wire rope 6 mm dia (6x19 stranded wire with steel core of 6 mm dia) sheathed with PVC 2mm wall thickness, overall thickness being 10 mm. PVC sheath should be made of type 6 compound as per IS 5831 of 1984 Reaffirmed 2001 and steel wire rope as per IS: 2266:2019. Reclaimed or recycled material should not be used.(Inspection by Consignee)
6000
61
370200
... More
Supply of 8 SWG GI wire (4mm dia) suitable for track circuit rail bonding. As per IRS Specification S:13@45>46@(Inspection by Consignee)
200
102
20490
... More
Supply of Hydrometer, Exide make or similar for measuring specific gravity of Battery Graded acid with mounting stand in location Boxes.Consignee inspection under manufacturer certificate.(Inspection by Consignee) Per
100
334
33470
... More
Supply of Electronic Timers for DAC reset arrangement 3 sec to 30 sec with 2NO/2NC contact working voltage 24V/60V DC. Siemens/ABB/L&T or SELEC (642XA programmable electronic timer switch) make.(Inspection by Consignee)
45
3326
149703.75
... More
Supply of Pre-wired Crank Handle cum key lock relay box (of metal) alongwith LEDs, with approved type push buttons, 8-way terminal strips, string rod, etc. as per Drawing No.RST.C.114(Inspection by Consignee)
6
12351
74110.56
... More
Supply of William stretcher nylon insulation set suitable for ground connection as per RDSO drg No T-10367, T-10368, T-10384 as applicable and to the spec IRS S 23 & 40/84 with latest amendements .(Inspection by Consignee)
100
627
62761
... More
Supply of Tongue attachment nylon insulation set consisting of one insulating plate as per Drg no: RST-106961 & 3 nos of Ferrules with collars to suite rodding supplied as per RDSO spec & Drg.no: RST-10692(Inspection by Consignee)
100
399
39919
... More
Supply Gauge Tie plate nylon insulation as per RDSO drg No: T- 10372 Alt2, T- 10368, T- 10371 Alt2, T-15083/88/Alt2 & T-11690/Alt2 and to the spec IRS S 23 & 40 with amendement 01 or latest amendements.(Inspection by Consignee)
100
288
28805
... More
Supply of Ground connections, complete set suitable for IRS type/appd. point Machine for ordinary turnout with tounge attachment insulation and other insulation as per RDSO Drg. 96 S/3361@47>47?40@for IRS type point machine) or RDSO Drg No.SA-9151/52 (for Siemens point machine) with latest amendements. However the ground connection shall be procured only after confirmation from Railway engineer as per site condition /type of machine/turnout.(Inspection by Consignee)
30
9642
289264.8
... More
Supply of Ground connections,complete set suitable for IRS type/appd. point Machine 97 for derail switch with tounge attachment insulation as per RDSO Drg. S/3361@47>47?40@for IRS type point machine) or RDSO Drg No. SA 9151/52 with latest amendements. However the ground connection shall be procured only after confirmation from Railway engineer as per latest site condition /type of machine/turnout.(Inspection by Consignee)
4
8428
33712.04
... More
Supply of GI bend pipe, 'B' class, 50mm dia for cable entry in point machines, alongwith required fixing arrangements as per standard practice on Central Railway. As per Drg No. RST.11835.(Inspection by Consignee)
60
298
17896.8
... More
Supply of GI pipe, inner dia. 100mm dia. B-class as per spec. No.IS 1239 PT. 1/2004 or latest with sockets and fittings. TATA/JINDAL/ZENITH BIRLA make.(Inspection by Consignee)
100
1214
121460
... More
Supply of DWC HDPE pipe with one snap fit coupler and 'O' ring fire resistant, anti rodent, in 6 meter length of size 120 mm outer dia as per RDSO/SPN/204/2011 Ver. 1.1 with Amd.1 or latest.(Inspection by Consignee)
300
379
113787
... More
Supply of RCC pipes half round of size 300mm dia outer and 250 mm dia internal 1 mtr long matching to IS No. 458/2003 amendment-1 with Rev.4.(Inspection by Consignee)
400
498
199304
... More
Supply of Modular terminal block of 2.5 sq.mm 2 in 2 out type disconnect type terminal 103 along with as per RDSO/SPN/189/2004 Rev 3.0. The current capacity of 16 Amps and more. The terminal should have marking at centre to view description from front. Material to be procured from RDSO approved firms only.(Inspection by RDSO) 104
8000
138
1105600
... More
Supply of DIN Channel for the terminals 1 Mtrs each.(Inspection by Consignee) 105
133
255
34013.42
... More
Supply of End plates for modular terminal block.(Inspection by Consignee) 106
666
27
18381.6
... More
Supply of End Clamp for modular terminal block.(Inspection by Consignee) 107
1333
19
26446.72
... More
Supply of Marker Card as per customer spec. (10x10)(Inspection by Consignee)
800
98
79120
... More
Fuse terminal block with LED indication upto 2.5 sq.mm screw type one in one out (suitable for (400 mA, 630mA, 1A. 1.6A, 2A, 4A, 6.3A & 10A) as per RDSO/SPN/189/2004.(without fuse) (Inspection by Consignee) 109
1000
214
214580
... More
End plate for through terminal block with LED indication.(Inspection by Consignee) 110
1000
16
16070
... More
Fuse links of (400 mA, 630mA, 1A. 1.6A, 2A, 4A, 6.3A & 10A) (Inspection by Consignee) 111
1000
50
50910
... More
Shorting link isulated Grey in colour.(Inspection by Consignee)
3000
17
52230
... More
Operating tool (operating tool, screw driver & stripper) as per item no.3.7 of Chapter- III. (Inspection by Consignee)
10
10219
102190.4
... More
Tool bag complete with Megger as per item no.3.8 of Chapter-III. ADD AC/DC clamp meter, with Hand Held Tool Bag.(Inspection by Consignee)
2
61611
123223.78
... More
Supply of Adhesive Tapes rolls, PVC (18mmx25Mtr) Steel Grip/SCOTCH/ANCHOR. (Inspection by Consignee)
100
39
3953
... More
Supply of Thermo shrink Cable Jointing kit (Reinforced) TSF-2 type generally 115 conforming to RDSO specification RDSO/SPN/TC/57/2015 Rev 1 with modified kit contents as per CSTE's Specification No.CR/SPN/TC/57(A)/2015 Dt. 06.01.2015(Table-A) to be suitable for jointing both 10/20/50 pair PIJF and 4/6 Quad cables along with sub-kit (Table-B) for armour continuity.(Inspection by Consignee)
20
3530
70610.4
... More
Supply of Trans-receiver hand held 5 Watt Analog VHF Set along with two sets of OEM 116 approved rechargeable battery including one as spare, quick Batter Charger, Helical Antenna and Belt Clip conforming to RDSO specification no. RDSO/SPN/TC/107/2018 Rev 0.0 with amendment no.1 or later.(Inspection by RDSO)
5
15909
79545
... More
Supply of VHF 25W transreceiver (synthesised) set complete consisting of Analog Set as per CR specification.(Inspection by Consignee)
2
28084
56169.4
... More
Supply of 4.5 Kg CO2 type fire extinguisher alog with all accessaries, extinguisher testig certificate has to be supplied along with - Supply of ISI marked Carbon di Oxide type (BC) fire 118 extinguisher of 4.5 Kg capacity confirming to IS 2878:2004 from seamless cylinder, with IS marked control value, high pressure mtr., Long discharge hose and horn complete with initial gas charged with carrying handle and wall mounting braket etc., as required by Site Engineer.(Inspection by Consignee)
6
5922
35535.42
... More
Supply, Installation, Testing & Commissioning of Microprocessor based intelligent, addressable, Fire Alarm Control Panel with LCD display complying to RDSO/SPN/217/2019 Ver 3 or latest modular, 1 loop (minimum 125 detector/devices per loop-expadable to 2 loops) with 320 119 Character with soft keys for displaying alarm, events and operating functions, Day/Night operation function, Remote maintenance service featgure etc. The panel should be multi-protocol i.e. able to support at least 2 different makes of addressable detectors. The pael should have minimum two relay outputs & 1 Monitored Sounder Output. It should have provision to be connected to repeater panels in future. The pael shall capable to operate o 230 volts AC power supply, automatic battery cjarger, 24 volts, sealed lead acid maintenance free batteries sufficient for 24 hours normal working and then be capable of operating the system for 30 minutes during emergecy condition. Panel should be VdS Certified.(Inspection by RDSO)
1
79317
79317.61
... More
Supply, Installation, Testing & Commissioning of Analogue Addressable Multisensor Detector complying to RDSO/SPN/217/2019 Ver 3 or latest. As per latest VDS approved/Listed. (Inspection by RDSO)
30
4008
120253.5
... More
Supply, Installation, Testing & Commissioning of Manual call points, complying to RDSO/SPN/217/2019 Ver 3 or latest. As per latest VDS approved/Listed.(Inspection by RDSO)
3
6167
18502.14
... More
Supply, Installation, Testing & Commissioning of Resettable, Analogue Type Linear Heat Sensing (LHS) Cable complying to RDSO/SPN/217/2019 Ver 3 or latest. As per latest UL or FM or VDS or LPCB approved/Listed.(Inspection by RDSO)
100
1668
166867
... More
Supply, Installation, Testing & Commissioning of LHS Interface Module with all accessories for single stretch, complying to RDSO/SPN/217/2019 Ver 3 or latest. As per latest UL or FM or VDS or LPCB approved/Listed.(Inspection by RDSO)
1
158337
158337.29
... More
Supply, Installation, Testing & Commissioning of Aspiration (Air Sampling Type) Detection Unit complying to RDSO/SPN/217/2019 Ver 3 or latest. As per latest UL or FM or VDS or LPCB approved/Listed.(Inspection by RDSO)
1
328465
328465.24
... More
Supply, Installation, Testing & Commissioning of CPVC Pipe for Aspiration Detection System complying to RDSO/SPN/217/2019 Ver 3 or latest and shall be listed/approved by UL or FM or VDS or LPCB or tested with appropriate equivalent standard.(Inspection by RDSO)
100
1905
190536
... More
Supply, Installation, Testing & Commissioning of Analogue Addressable loop powered Monitor Module with inbuilt isolator complying to RDSO/SPN/217/2019 Ver 3 or latest. (Inspection by RDSO)
3
10320
30960.51
... More
Supply, Installation, Testing & Commissioning of Analogue Addressable loop powered Control Module complying to RDSO/SPN/217/2019 Ver 3 or latest. (Inspection by RDSO)
1
10320
10320.17
... More
Supply,Testing & Commissioning of Hooter cum Strobe complying to the RDSO/SPN/217/2019 Ver 3 or latest. (Inspection by RDSO)
1
9143
9143.04
... More
Supply,Testing & Commissioning of 2C 1.5 sq mm twisted shielded armoured copper cable (Per Meter) with accessories complying to the RDSO/SPN/217/ 2019 Ver 3 or latest. (Inspection by RDSO)
300
133
40140
... More
Supply,Testing & Commissioning of Isolator Device to isolate te circuit in case of short circuit, complying to the RDSO/SPN/217/ 2019 Ver 3 or latest. (Inspection by RDSO)
1
4391
4391.24
... More
Supply of Permanently Lubricated HDPE Telecom duct of size 50/42 mm and 131 accessories as per latest Specification TEC GR No. GR/TX/CDS-008/03/March 11 with latest amendment" for OFC cable of size 24 fibre armoured in length of 1000 mtrs/roll. Duct to be supplied from TEC approved sources.(Inspection by Consignee)
3
86202
258607.89
... More
Supply of 24 fibre straight joint closure (SJC) complete with all accessories as per RDSO 132 specification No. RDSO/SPN//TC/68/2007, Rev.0 amendment No. 1.1 or latest amendments as as per or TEC Spec.G/OJC-01/01 Sept.2003 or latest of Raychgem make model EOSC 400 B4 24F or TVS ICS make model 1500-L:1 83-XX or Birla VXL make model VT-200 or 3M make model 2179 CD.(Inspection by Consignee)
10
4032
40321.2
... More
Supply of various types of Track Magnets complete alongwith 6 pin coupler including fixing clamps Siemens make S 25432 - MI (IND) . Frequency F-1 to F-5 of functional equivallent. (Inspection by RITES)
13
188747
2453715.16
... More
Supply of Wooden Blocks (Rail deflectors) as per drg.No.BB/SK/C/9(Inspection by Consignee)
13
533
6937.06
... More
Supply of Opto coupler box & safety cover of FRP for fixing Siemens type opto coupler cards inside box for installation of AWS with mounting clamps as per C. Rly. Drg. & practice. (Inspection by Consignee)
13
22974
298671.23
... More
Supply of Opto coupler card of suitable type of Siemens make or fuctional equivalent. (Inspection by Consignee)
13
18925
246029.81
... More
Supply of PVC flexible wire size 30/0.25 mm annealled copper conductoer as per IS 137 694:1990 of Finolex make or similar for connecting Opto copler box to signal transformer fixed inside unit/location box as per C. Rly Grg. No. RST-11545 in different colours of Green. Yellow, Red, White, Blue, Black & Grey.(Inspection by Consignee)
1000
34
34800
... More
Supply of GI reducer of size 40 mm/20 mm as per IS 1239 PT. 1/2004 or latest medium class for installation of AWS.(Inspection by Consignee)
13
243
3165.37
... More
Supply of stainless steel clamps of SS-304 type and size B for fixing Neoprene rubber tube on reducer & six pin coupler of track magnet and PVC conduit pipe with glands fixing on signal pots & Optocoupler box as per C.Rly. Drg. No. RDS: 11545.(Inspection by Consignee)
20
98
1960.6
... More
Supply of coupler lugs of various size of Dowell's make or similar for terminating cable conductors inside opto coupler boxes, junction boxes and on signal transformer for installation of AWS as per C.Rly. Drg. No. RDS: 11545.(Inspection by Consignee)
100
56
5689
... More
Supply of Brass Gromet of suitable size for taking out wires from signal post Comet make 2125 & 2118 or similar.(Inspection by Consignee)
20
161
3226.2
... More
Supply of Neoprene Rubber pipe of suitable size for taking 7 core cable from reducer to six pin coupler of track magnet for installation of AWS.(Inspection by RITES)
500
1264
632390
... More
Supply of Dowell's crimping tool of Model make 3D-2 109/108 suitable for crimping lugs from size 0.5 mm to 16 mm.(Inspection by Consignee)
8
17334
138679.52
... More
Supply of reinforced PVC conduit pipe of internal dia of 25 mm for taking able conductor from signal post to opto coupler box as per C.Rly. Drg. No. RST: 11545.(Inspection by Consignee)
600
325
195414
... More
Supply of 7 core PVC insulated cable having each core made up of 30 x .025 mm tinned stranded wires for AWS generally confirming to IRS : S-63/89.(Inspection by RDSO)
600
1351
811086
... More
Supply of six pin couplers and clamps for fixing with rail suitable for both 52 Kg & 60 Kg. for track magnets.(Inspection by Consignee)
8
24332
194661.52
... More
Supply of field testing equipment for Siemens make AWS Track Magnets complete with battery.(Inspection by RITES)
1
733131
733131.42
... More
CENTRALISED EI Installation, testing & commissioning of EI system complying to RDSO Technical Advisory Note No.STS/E/TAN/3012 Ver.2.0 dated 10.08.2016 and Supply, Installation, testing & commissioning of earthing arrangement for EI as per RDSO/SPN/197/2008 at locations/Gumtis/Cabins/EI Huts/Auto Hut of the yard, Earthing of EI equipment, relay racks and Power equipments etc. to be done with Class A Protection, earthing shall be in the form of Perimetric/Ring Earth conforming to RDSO specification RDSO technical advisory Note for earthing and bonding scheme of EI No. STS/E/TAN/3006 Ver. 1 dt. 02.11.2012 or latest, with earth resistance less than 1 ohm.(Inspection by Consignee)
-
-
1
... More
Training of Technician/Engineers/Senior Engineers in installation, for trouble shooting & repairing, commissioning, Testing, Repairs Troubleshooting. (Hard copies of training material/course modules to be given to each participant.).(Inspection by Consignee)
6
105508
633053.34
... More
Installation of Relay Rack Assembly including IDF pillars if any complete with wall 3 supports, scaffolding, ladders, runway for cables, Relay/Relay group base plates, fixing of Tag blocks etc. The work shall be done as per approved plan, extant practice on C. Railways & the instructions of Rly engineer at site.(Inspection by Consignee)
6
1810
10865.88
... More
Installation of Cable Termination Racks Assembly complete including wall supports, 4 scaffolding Disconnecting links/ARA terminal, 96 way tag block cover & other necessary accessories etc. The work shall be done as per approved plan, extant practice on C. Railways & the instruction of Rly engineer at site.(Inspection by Consignee)
4
1541
6167.28
... More
Termination of cable cores on ARA terminal/disconnectiong links in the cable 5 termination rack. This includes all assosiated works of pulling out the cable from under ground, peeling off insulation, dressing of cable core supported on sting rod with contractors own material. The work shall be done as per instructions of Rly engineer at site.(Inspection by Consignee)
12000
13
161760
... More
Installation, wiring, testing and commissioning of Data logger complete along with 6 accessories with Contractors own wiring & fixing material as per following configuration. (It includes loading of NETWORKING software and networking of data logger. The requisite communication cable/channel for networking will be arranged by Railway. (i) 2560 digital & 32 analog inputs(Inspection by Consignee)
1
58627
58627.1
... More
Charging of 2V Lead Acid Batteries with contractors own battery grade sulphuric acid 7 and distilled water with minimum two charge - discharge cycles, installation of charged batteries in groups & their connection & wiring. The work shall be done as per extant practice of C.Rly & instruction of Engineer-in-charge.Detailed measurements of initial charging shall be recorded jointly by contractor & Rly's site-in-charge.(Inspection by Consignee) (Unit may be read as Per 100 VAH)
120
89
10743.6
... More
Installation and wiring of block instrument. The work of wiring from Telecom DP to 8 block Instrument and block instrument to Relay Room and connection with power supply will be done by the Contractor with Contractor's own wiring & protection material as per instructions of Engineer- in-charge . (Inspection by Consignee)
4
11196
44786.96
... More
Wiring and charging of Integrated Power Supply System to signaling installation. This includes connection of MF Earth of 1 ohm earth resistance for IPS and power distribution connection to bus bars and relay racks in the room with contractor's own wiring materials and fabrication and fixing 9 of AC/DC power distribution board made on 10mm thick Phenolic hylam sheets or any standard make with connections suitable for 63 A.Wiring to be done considering site requirement , depending upon the load with suitable wires,lugs & glands as per instructions of Engineer-in-charge. The item also includes supply & fixing of ladder along the wall for carrying power supply wires/cables from IPS room to Relay room/power room and potential free contact wiring at Datalogger IDF, etc.(Inspection by Consignee)
1
36788
36788.6
... More
Wiring, fixing & commissioning of modules of fuse 0.6 to 4 Amp. rating alarm system having change over arrangement and potential free contact wiring at Datalogger IDF. etc. as per instructions of Railway Engineer (Module fo 32 nos. fuses)(Inspection by Consignee) (Unit may be read as No. of modules)
16
12212
12212.96
... More
Wiring, fixing & commissioning of modules of fuse to 4 to 10 Amp. rating alarm system having change over arrangement and potential free contact wiring at Datalogger IDF. etc. as per instructions of Railway Engineer (Module fo 24nos. fuses)(Inspection by Consignee) (Unit may be read as No. of modules)
-
-
11
... More
Lettering & Numbering of detail and description writing of particulars of terminations & 12 equipments on relay rack, relays, cable termination rack, battery & power equipments, IPS, operating panel, axle counter etc constituting entire system with contractor's own paint and writing material ("Asian/Dulux" make enamel paints to be used). The work shall be done as per extant practice on C.Rly & instruction of Rly engineer at site.(Inspection by Consignee)
30
434
13043.7
... More
Preparation of cable route plan, cable coreage plan, location particulars, Cable termination rack particulars, cable meggering report, earth resistance particulars, Traction bonding diagram, 1/2 wire count sheet and any other drawing in Autocad in A3/A4 size.The contractor shall initially supply 3 sets of circuits complete for approval of Railways. Railways will return one set to the 13 contractor duly approved with alterations/corrections if any. The contractor shall incorporate Railways alterations/corrections in the tracings without any deviation and submit all tracings complete in all respects to the Railways . This includes submission of final cable route plan as per laid cable duly measured at every 30m clearly indicating distance of laid cable from fixed point of reference & indicating all track crossings and tail cables. This also include designing of cable coreage plan based upon I.P in consultation with engineer-in-charge. (i) For small/medium yards (<= 100 routes) (Inspection by Consignee)
1
28378
28378.83
... More
Excavation and Casting of Main signal foundation as per Drg No SK 801 with 14 contractor's own materials including cement and anchor bolts of standard size. The required scaffolding Ferma etc for Casting of foundation will have to be brought by the contractor at his own cost.(Inspection by Consignee)
15
10796
161943.3
... More
Excavation and Casting of Shunt signal foundation as per Drg No SK 802 with 15 contractor's own materials including cement and anchor bolts of standard size. The required scaffolding Ferma etc for Casting of foundation will have to be brought by the contractor at his own cost.(Inspection by Consignee)
6
3126
18756.48
... More
Erection of CLS Post with Surface base and signal unit on top or on OFF set Bracket, 16 fixing of front and back staging, ladder and guards, signal name plates/boards if any with contractors own brackets and fixing materials. This also includes erection of auxiliary signals like calling on, shunt signal if any. The work shall be done as per instructions of Rly engineer at site. (Inspection by Consignee)
15
4118
61776.9
... More
Erection of shunt signal with Surface Base, Post, Signal unit and fixing of No.plates. The work shall be done as per instructions of Rly engineer at site. (Inspection by Consignee)
6
568
3408.6
... More
Fixing of Jn.Route Indication 1-Way/2-Way/3-Way on the top of the signal post. (Inspection by Consignee)
6
901
5407.02
... More
Fixing of Stop Board, Block section limit Board, goods warning board with contractors own material. The work shall be done as per instruction of Rly engineer at site.(Inspection by Consignee)
10
652
6528.7
... More
Termination of tail cable on Main signal units and wiring with contractor own material, fixing of lenses etc. The work shall be done as per instruction of Rly engineer at site.(Inspection by Consignee)
28
1293
36220.8
... More
Termination of tail cable on Shunt signal units and wiring with contractor own material, fixing of lenses etc. The work shall be done as per instruction of Rly engineer at site.(Inspection by Consignee)
6
420
2522.1
... More
Supply and fixing of Protective screen of expanded metal 12 SWG of size 1200 x 1500 mm on signals as per standard practice.(Inspection by Consignee)
4
5096
20387.44
... More
Fabrication and fixing of phenolic laminated/Fibre glass sheet in location box by providing all fixtures as per Railway Drawing including fixing of PVC coated/with PVC pipe covered string rods at the back side for cable support with contractor's own materials. The work shall be done as per drg and arrangement similar to SK 783-1&2. with latest alterations & as per instructions of Rly 23 engineer at site. (i) Single Case(Inspection by Consignee)
50
2657
132852
... More
Fabrication and fixing of phenolic laminated/Fibre glass sheet in location box by 24 providing all fixtures as per Railway Drawing including fixing of PVC coated/with PVC pipe covered string rods at the back side for cable support with contractor's own materials. The work shall be done as per drg and arrangement similar to SK 783-1&2. with latest alterations & as per instructions of Rly engineer at site. (ii) Half Case(Inspection by Consignee)
20
2342
46840.8
... More
Fixing of ARA Terminals and fuse blocks on phenolic laminated sheets and fixing by stainless steel/brass nuts & bolts. This includes provision of two additional holes on the board on either side for cable conductor entry. (Inspection by Consignee)
1000
16580
16580
... More
Termination of cable cores on ARA terminal/fuse blocks in the apparatus Cases/ cable termination rack. This includes all associated works of pulling out the cable from underground. The work shall be done as per location plans and instructions of Rly engineer at site.(Inspection by Consignee)
1000
12480
12480
... More
Excavation and Casting of Apparatus Case foundation with contractors Anchor bolts, 27 cement, ballast and other materials. The required scaffolding Ferma etc for Casting of foundation will have to be brought by the contractor at his own cost. (i) Single Case as per Drg No . SK-803(Inspection by Consignee)
50
11666
583334
... More
Excavation and Casting of Apparatus Case foundation with contractors Anchor bolts, 28 cement, ballast and other materials. The required scaffolding Ferma etc for Casting of foundation will have to be brought by the contractor at his own cost. (ii) Half Case as per Drg No . SK-804(Inspection by Consignee)
20
11438
228776.8
... More
Erection of Apparatus Cases. This includes filling of location foundations and plastering. (i) Single Case(Inspection by Consignee)
50
1295
64784.5
... More
Erection of Apparatus Cases. This includes filling of location foundations and plastering. (ii) Half Case(Inspection by Consignee)
20
994
19880.6
... More
Installation of Eqpt. (Relays, resistance, chargers batteries etc.as applicable) & wiring of the same in apparatus Cases as per location diagrams & circuit diagrams, as per Instruction of site incharge and practice. (i) Single Case(Inspection by Consignee)
50
1767
88365.5
... More
Installation of Eqpt. (Relays, resistance, chargers batteries etc.as applicable) & wiring of the same in apparatus Cases as per location diagrams & circuit diagrams, as per Instruction of site incharge and practice. (ii) Half Case(Inspection by Consignee)
20
1200
24019.6
... More
Installation of earth electrode assenbly as per Drg.No.RE/S&T/SIG/Tender/SK726/85 including earth wire connected through GI wire 8 SWG supported on M.S. flat of size 6mm x 40 mm to earth electrode as per drg. No. CR/S&T/SK-815 for sigg. Equipment such as lever frames, apparatus 33 case, signals, relay racks,block insruments, and etc. as per RE manual. The earth value should be less than 10 Ohms including the lead wire. The value should be measured in presence of Rly. supervisor. It should be documented and painted on earth enclosure made of concrete.( only earth electrode will be supplied by Railway). All other material required for provision of earthing will be brought by the contractor.(Inspection by Consignee)
120
2983
357985.2
... More
Installation of unit Earth as per RDSO/SPN/197/Ver.I or latest, to construct earthing of
40
6242
249704
... More
Connecting main earth electrode to BRC using 35 sq.mm copper cable.(Inspection by 35 Consignee)
100
109
10926
... More
Installation of 25 x 6 mm copper tape (bonding ring conductors) mounted on insulated standoffs (1 round)(Inspection by Consignee) 37
100
244
24499
... More
Installation of 300 x 25 x6 mm Cu equipotential Bus Bar.(Inspection by Consignee)
200
520
104160
... More
Installation, wiring, testing & commissioning of Microprocessor baased universal earth leakage detector unit 12 channel AC/DC.(Inspection by Consignee)
2
8745
17490.04
... More
Erection, Fitting and Rail connection of Track Lead Juntion Box on two 39 supports(M.S.angle) with contractor's fixing material and PVC jacketed wire for track lead connection including angles of size 40 x 40 x 5 mm 1200 mm length. This will include drilling of holes for track lead/side connections on rail. The work shall be carried out as per Drg. No. SK-845 or/& instructions of Rly engineer at site.(Inspection by Consignee)
120
1540
184836
... More
Provision of bonding with contractor's PVC jacketed wire rope for Track Lead connection. PVC jacketed wire rope should be of Galvanised steel wire rope 6mm dia (6 x 19 stranded wire with steel core of 6 mm dia ) sheathed with PVC 2mm wall thickness, overall thickness being 40 10mm PVC sheath should be made of type 6 compound as per IS 5831 of 1984 Reaffirmed 2001 and steel wire rope as per IS:2266:2019. Reclaimed or recycled material should not be used. This will include drilling of 7.1mm dia holes in rails (4 Nos) and provision of two jumpers for each bond, clipping of bonds etc. with contractors own materials and tools as per instruction of Rly engineer at site. (Inspection by Consignee)
500
200
100095
... More
Provision of bonding with GI wire 4mm dia ( 8 SWG) for track jumper & fish plate joints 41 bonds. This will include drilling of 7.1mm dia holes in rails (4 Nos) and provision of two jumpers for each bond, clipping of bonds etc. with contractors own tools as per instruction of Rly engineer at site. (Inspection by Consignee) Per
1000
189
189370
... More
Fixing of point machine on newly laid turnout o n Wooden/MBC sleepers , fixing of ground connections, adjustment and testing with crank handle operations,Removal of ground 43 connection & point machines duly numbered. This will include fixing of bend pipes with welded frame for cable entry to machine. This will also includes necessary adjustment and smithy work, drilling of holes to tounge rails, fitting of insulation for tounge attachment, gauge plate & stretcher bars, cable termination & wiring if required. The work shall be done as per extant practice on C. Rly & the instruction of Rly engineer at site.(Inspection by Consignee) (Unit may be read as PER T/O)
22
4161
91555.42
... More
Installation, fixing and wiring of Boxes for Key Lock Relays with contractor's wiring and fixing material.The work shall be done as per extant practice on C. Rly & the instruction of Rly engineer at site.(Inspection by Consignee)
6
3680
22085.28
... More
Excavation of cable trench as per cable route plan,1.0 mt. deep and 300mm wide along side the track in normal soil/strata, conforming to distances as per cable route plan and refilling after cable laying. This work includes covering of cable laid in trench by loose soil for a layer of 50mm 45 thickness after clearing of route,bushes etc. It shall be ensured that top of the cables laid is at a depth of 0.8m or more. It if is less, then the width and depth shall be suitably increased and accordingly proportionate payment shall be made. In case depth of trench is not achievable due to site conditions proportionate payment will be made as per procedure. The work shall be done as per the extant practice on Central Railway and instructions of Railway Engineer at site. Drg. No. SK 805(Inspection by Consignee)
1500
413
619500
... More
Excavation of cable trench as per cable route plan,1.0 mt. deep and 300mm wide along side the track in hard soil, conforming to distances as per cable route plan and refilling after cable laying. This work includes covering of cable laid in trench by loose soil for a layer of 50mm 46 thickness after clearing of route,bushes etc. It shall be ensured that top of the cables laid is at a depth of 0.8m or more. If it is less, then the width and depth shall be suitably increased and accordingly proportionate payment shall be made. In case depth of trench is not achievable due to site conditions proportionate payment will be maden as per procedure. The work shall be done as per the extant practice on Central Railway and instructions of Railway Engineer at site. Drg. No. SK 805(Inspection by Consignee)
600
688
412998
... More
Cutting of all types of Roads/ platforms (ecxcept concrete type) for trenching and 47 excavation to depth of 300mmx300mm wide approx. and refilling after laying of RCC/GI /DWC pipe & to restore them to original condition. The work shall be done as per extant practice on C.Rly & instructions of Rly engineer at site. Drg. No. SK 807(Inspection by Consignee)
72
3441
247800.24
... More
Fixing of GI pipes for crossing the culverts, bridges etc. and concreting of ends with brick masonry at both ends as per the instruction of Rly engineer at site.(Inspection by Consignee)
100
82
8256
... More
Digging of trench 1.0 M deep from rail flange/road level (for LC) and 0.3Mtrs. to 0.6 49 Mtrs wide and back filling after placing of DWC/RCC/GI pipe.(Placing of DWC/RCC/GI pipe coverd separately. The ballast disturbed be screened and dressed as required by Engineer-in-charge or his representatives and road tarred immediately. Drg. No. SK 806(Inspection by Consignee)
72
688
49559.76
... More
Laying of DWC/RCC pipes alongwith collars/RCC Half round pipes in trenches at places of track and road crossings, platform cuttings etc. (Inspection by Consignee)
300
67
20124
... More
Laying of signalling/Power/Telecom cable of various cores/sizes in trenches.(Inspection by Consignee)
140
6132
858614.4
... More
Jointing of 4 / 6 quad cable with Heat Shrinkable straight through Jointing Kit for 4 / 6 quad cable.(Inspection by Consignee)
10
4203
42033.8
... More
Wherever depth of 0.5M cable trench is not feasible, cable shall be protected as 53 under:- Preparation of cement mixture 1:3:6 with contractor's own materials and spreading cement concrete mixture layer of 100 mm thick over the already laid cables in the excavated trench. (Inspection by Consignee)
100
6288
628887
... More
Fixing of modular terminal/fuse blocks alongwith all accessories with provision of fixing 54 holes on hylam sheets/side angles of Loc Box and fixing by galvanised nuts & bolts. This includes fixing of DIN channel alongwith PVC Comb type 'C' channel (size 2 inch x 2 inch) for cable termination on modular terminal. The PVC channel with cover to be supplied by firm as required. The work shall be done as per the instruction of Rly engineer at site.(Inspection by Consignee)
8000
22
179840
... More
Termination of cable cores on ARA terminal / Disconnecting link/fuse blocks, in the 55 Apparatus cases/cable termination rack. This includes all assosiated works of pulling out the cable from under underground. The work shall be done as per location plans and instructions of Rly engineer at site.(Inspection by Consignee)
8000
8
67040
... More
Laying of GI pipes in on bridges/culverts/concrete drawin/mountain ridges etc. with 56 suitable GI bend shall be provided where there is turning of pipe as per the instruction of Site engineer. GI clamps at every 2m as shown in the drawing to be fixed. Suitable holes to be made in the pipe before laying as per the instruction of the site engineer 10mm dia Drg. No. SK 808.(Inspection by Consignee)
500
169
84690
... More
Releasing of cables from old location boxes and taking it into new location boxes. This 57 includes excavating the earth to release the cables from old location box for taking it into new location. This also includes releasing the old location box and bringing it to nearest station / central cabin. Location (old) will be released only after ensuring all working cables have been shifted in New location.(Inspection by Consignee) (Unit may be read as Per location)
15
2450
36750.45
... More
REMOVAL OF PSC/WOODEN SLEEPERS coming in the way of/route of cable trenching, 58 signal/location foundation/Track crossing etc. These obstruction will be removed by contractor for ensuring proper execution of related works.(Inspection by Consignee)
100
166
16621
... More
REMOVAL of Redundant/old rails coming in the way of/route of cable trenching, signal/location foundation/Track crossing etc. These obstruction will be removed by contractor for ensuring proper execution of related works.(Inspection by Consignee)
50
166
8338.5
... More
Making an entrance for new cable in old existing location, Casting concreting and curing of foundation and restoring it to old position by perfect masonry/concreting work. Contractor will ensure that cable entered in Location Box is properly protected.(Inspection by Consignee)
10
544
5449.9
... More
Making of Thermoshrink straighht through/derivation/ transformer /PIJF cable joint for underground jelly filled cable 6 quad/4quad/20 pair 10 pair etc. PIJF cable as per the instruction of Rly engineer at site.(Inspection by Consignee)
20
1789
35795.6
... More
Horizontal boring of cable duct of minimum 2.0 Mtr. depth alongwith laying of 120mm HDPE pipe for track crossing with minimum depth reckoned from the bottom of the rail/road crossing with minimum depth reckoned from ground level. The work shall be done as per extant practice & 62 instructions of site Engineer. Prepration of site for Horizondal boring shall be carried out in presence of Railway Representative. HDPE will be supplied by Railways. Note:- Contractor shall provide all material required for boring and adequate nos. of labours for proper laying of cables into the bore. Cable shall be laid cautiously so that it should not get damage due to rough handling & pressure on cable.(Inspection by Consignee)
1000
3080
3080340
... More
Termination of Tail cable inside the point machine through bend pipe. This includes preparatory works of pulling the cables, and peeling out the insulation, dressing and lacing after 63 termination etc., pulling of tail cable as per circuit requirement inside point machine through bend pipe, termination of cables on terminal blocks as per instruction of site supervisor. The cable shall be entered in such a way that, armouring shall protect the cable near sharp edge of entry point and armouring shall be clamped between pipe fixing bracket and body of point machine. (Inspection by Consignee)
22
455
10015.94
... More
Patching work in old location box consisting 1) Digging of pit, cleaning of earth from all 64 sides, breaking of seal of location boxes removal sand from location, marking of new cable holes 2) insertion of cable from ground 3) making place for cable termination in old location, shifting ARA, fuse etc after removal and termination including fixing of ARA. 4) Termination of cable in old location 5) Filling of sand and plastering to all sides upto 50mm below ground level. (Inspection by Consignee)
10
7410
74102.9
... More
Laying of RCC half round cement pipe of appprox. Size (150/300mm dia X 2 mtr. length) inside the trench after laying of cable. Pipes shall be placed as per directives of site engineer. (Inspection by Consignee)
1000
43
43010
... More
Painting of two coats of synthetic enamel paint over one coat of primer on the following after scraping & cleaning surface wherever necessary with contractor' own supply of 66 paints.Wherever required contractor shall apply coating of epoxy paint also as per instructions of site- in-charge.Epoxy paint will be supplied by Railways. NOTE:- The paint and primer should be from M/s Asian paints Co. Ltd.,. The paints will be primer (IS 5660 of 1970) the Aluminium synthetic black enamel (IS 2932 of 1974) brilliant white and yellow Painting two coats of enamel paint over one coat of primer. (Inspection by Consignee)
-
-
99627.78
... More
Lettering / Numbering of Signals, Point Machine, Track Lead Junction Boxes, Block Joints, Apparatus Cases etc. (each item to be taken as One Unit) This work will be carried out as per the standard practice being followed in Central Railway. (Inspection by Consignee)
416
66
27805.44
... More
Lettering / Numbering Termination particulars, equipments names etc., legibly and neatly inside location boxes. (i) Full Case.(Inspection by Consignee)
50
310
15548.5
... More
Lettering / Numbering Termination particulars, equipments names etc., legibly and neatly inside location boxes. (ii) Half Case.(Inspection by Consignee)
20
177
3540.8
... More
Installation, testing & commissioning of the 25 W VHF system including the erection of Mast, Antenna, charging of the battery with all Contractor's materials.(Inspection by Consignee)
2
10179
20358.3
... More
Installation testing and commissioning of Fire Detection, aspiration including flame 71 sensor, LHS cable flame sensor aspiration type smoke sensor as per RDSO SPN No. RDSO/SPN/217/2018 Version 2.0. This includes Control module for the control unit. monitor module for the Control unit LHS Interface should be a microprocessor based start point device that communication between LHS cable and control unit should be an intelligent device that will monitor LHS cable for continuity and over temperature fire signatures. This also includes Supply, Installation, Testing and commissioning of Integrated Remote Monitoring system Software for complete as per specifications, for integrating, Fire alarm system, VESDA system for monitoring at Division Head Quarter. (Inspection by Consignee)
1
36066
36066.5
... More
Laying of HDPE duct in trench and its protective work as per direction of site engineer. (Inspection by Consignee)
3
7242
21728.4
... More
Blowing/Drawing of OFC cable in HDPE/DWC duct and protective work, as per direction of site engineer.(Inspection by Consignee)
3
15389
46169.28
... More
Splicing (Jointing 2X24 F OFC) and testing of 24 fibre OF Cable and making the splice 74 joint as per direction of site engineer with contractors own splicing machine and tools. Splice loss of each fibre should be less than or equal to 0.05db. Splice reflectence should be better than 60db. (Inspection by Consignee)
20
7435
148703.6
... More
Fixing of Track Magnets as per C.Rly. Drg. No. RST-11545 with anti theft clamp as per Drg. No. RST-11472/4 and C.Rly Drg. No. BB/SK/C-23.(Inspection by Consignee)
13
761
9899.63
... More
Fixing of Wooden Blocks as per instructions of Rly engineer at site.(Inspection by Consignee)
13
200
2601.3
... More
Fixing of Opto-Coupler Junction Box on signal post and providing cable glands (25mm dia) on signal post after drilling holes and tapping threads on signal post as per Drg.No.RST- 11545(Inspection by Consignee)
13
1015
13199.03
... More
Laying of 7 core PVC insulated cable through GI pipes and Neopren rubber pipe 79 between opto coupler box and six pine coupler of A1 type track magnets as per C. Rly. Drg. No. RST : 11545 (1/3) . Termination of cable conductor on opto coupler card with the help of cripping lugs with proper dressing PVC numbering sleeve is to be provided.(Inspection by Consignee)
1
557
557.07
... More
Laying of flexible wires between main / route/ Auxilary signal units and opto coupler 80 box through signal post and reinforced PVC flexible conduit pipe and termination at both ends with appropriate size copper lugs as per C.Rly. Drg. No. RST: 11545. Wires are to be laid only after proper lacing and dressing with lacing threads, PVC flexible pipe is to be properly fixed with glands on signal post and opto copler units.(Inspection by Consignee)
1
290
290.4
... More
Testing of Track Magnets by test jig and commissioning of complete AWS equipments as per standard practices on Central Railway and instruction of site incharge after installation at site. (Testing report is to be submitted before commissioning).(Inspection by Consignee)
1
1109
1109.98
... More
Supply of - [i] SMPS based Integrated Power Supply System without MFVRLA Battery set conforming to RDSO Specifications RDSO/SPN/165/2012 Version 3.0 with later amendment for PI station as per Central Rly. Drg.No.PA/DRG/EI/IPS/03(L)/01 with later correction if any, as mentioned in 1 item no.3.9 of Chapter-III. Scope of Supply, Checking of Installation, testing and commissioning of IPSshall be as per RDSO letter No.STS//E/IPS/Genl Dated 03/04/2008 or Latest if any. [ii] Sealed Maintenance free VRLA battery set of 60 Cells (Stackable), in combination of 55+5 Cells for SMPS based integrated power supply system, each cell of 2 Volt/300 AH Capacity, fully charged conforming to RDSO Specification No.IRS:S:93/96(A) with later amendment, complete with connecting links and suitably numbered in stackable racks along with user manuals.(Inspection by RDSO)
1
1706953
1706953.78
... More
Supply, installation, wiring, testing & commissioning of Bumpless Power Supply 2 Autochangeover device complete along with accessories using Contractor's own wiring & fixing material as per following configuration - (i) Power Supply - AC/DC. (ii) Voltage 24V to 150V. (iii) Current Up to - 45Amp. Note: The work shall be done as per instructions of Railway's Engineer in-charge. (Inspection by RITES)
12
49560
594720
... More
Supply, installation, wiring, testing & commissioning of Automatic Power Source Changeover Device Model PT-R-ML-01, Voltage Range 20 to 150V, Current max - 45A.(Inspection by RITES)
12
49560
594720
... More
Supply of tool kit as given below - (i) Service test panel including meter for test of track equipment, tools for mounting and adjustment of track equipment and standard jig for drilling of holes in rail (as per manufacturer specification, list to be given by manufacture). Each set consists of - Tool 4 kit ETU001 & EDT001: (a) True RMS digital multimeter with probe set-1 no. (b) Extended wired socket to interface with diagnostic plug - 1 no. (c) Selector switch on panel base - 1 no. (d) Adjustable torque wrench with 13 mm & 19 mm inserts - 1 set. (e) 19 mm double ended spanner - 1 no. (f) Dummy wheel - 1 no. (g) Screw driver set with mains tester - 1 no. (h) Drilling template - 1 no. (i) Centre punch - 2 nos. (j) Carrying case for ETU001 - 1 no. (k) Carrying case for EDT001 - 1 no.(Inspection by Consignee)
1
92595
92595.1
... More
Supply of 13 MM rotary drill machine Bosch make model no. GSB 13 RE 600W or Hitachi or Black Decker or Dewault make.(Inspection by Consignee)
4
2474
9899.88
... More
Supply of Autoranging Digital DC/AC Clampmeter, Model KM2725 Kusam-Meco, FLUKE or Similar.(Inspection by Consignee)
4
6079
24319.6
... More
Supply of Steel cupboard (plain storewel) size 4'x2.5'Godrej make for ESM store. (Inspection by Consignee)
3
11146
33440.25
... More
Supply of Local Craft Terminal along with bag as per technical spcn attached with all 8 accessories compatible with EMS. It Should be Possible to plug in the Remote Service Terminal at any of the Station. It should be capable to program any Network element from any location of Network & read the full Status of any element in the Network from remote Service Terminal. Other details as as mentioned in item no.3.10 of Chapter-III. (Inspection by Consignee).
1
45548
45548.93
... More
Supply of the material for maintenance free Ring Earth consisting of looping of 4 earth pits each as per RDSO specification No. RDSO/SPN/197/2008 or latest amendment and RDSO drawing no. SDO / RDSO/ E&B/001 and 002. (Inspection by RDSO)
1
59736
59736.83
... More
Installation, testing and commissioning of the Ring Earth as per RDSO specification No. 10 RDSO/SPN/197/2008 or latest amendment and RDSO drawing no. SDO / RDSO/ E&B/001 and 002. All the consumables for mounting the copper tape/bus bar, copper lugs with stainless steel nut and bolts, copper bus bar etc. will be supplied by the contractor free of cost. (Inspection by Consignee) 11
1
18994
18994.12
... More
Supply of HDPE pipe 110 mm PN6PE100.(Inspection by Consignee)
700
690
483000
... More
Providing Road Breaker/concreate breaker/ boulder or rock breaker with compressor & 12 Jack Hammer for Railway work such as cutting & dismentalling of road concrete/Brick pucca structure(RCC/Steel section) including contractors fuel, driver and all other charges.(Inspection by Consignee)
800
1707
1366368
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%