Central Railway Tender
Search from over 12139+ business opportunities that have been announced from the biggest Mahatenders, e tender Maharashtra, Maharashtra government tenders, and the Online Tender Notices posted on Maharashtra e tenders till date. Find opportunities that have come in from the multiple corporations, Maharashtra government departments, State PSUs, and Private companies from the state.
Central Railway - CR Tender
Electrical Cables And Wires
Electrical and Electronics
Ireps
Opening Date26 Dec 2024
Closing Date27 Jan 2025
Tender Amount₹ 18,68,89,852.74
Costs
EMD
₹ 10,84,500Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Supply, Installation, Testing & Commissioning Of Outdoor Signaling Equipment In Kalyan-asangaon Section In Connection With Work Of Kalyan-asangaon 4th Line In Mumbai Division Of Central Railway.
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
DR-2024-10-DYCSTE-C-DR-S AND T/CENTRAL RLYTender No
DR-2024-10Tender Authority
Central Railway ViewPurchaser Address
-Website
http://ireps.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Supply of QTA2 AC immunised track relay, 9 Ohm, 2F.1B, along with plug board, retaining clip and connectors conforming to BRS:939A, 966 & Appendix F2, IRS:S34 & IRS:S23 (Inspection RITES) 5
150
4323
648450
... More
Supply of INDICATIVE TYPE OF FUSE INSERTS. IRS S:78-92
-
-
92445.5
... More
Supply of PPTC Fuse GP 60-185 UL-94 certification (1.6 Amps) for internal/external current. Make: LITTLEFUSE, FUZETEC, TYCO, BOURN, RAYCHEM etc.(Inspection Consignee)
150
11
1704
... More
Supply of PPTC Fuse GP 60-400 UL-94 certification (12V/4A) TF, TR Circuit. Make: LITTLEFUSE, FUZETEC, TYCO, BOURN, RAYCHEM etc. (Inspection Consignee)
1510
9
14480.9
... More
Supply of PPTC Fuse GP 30-100 (24V/1.4A) TPR, Circuit. Make: LITTLEFUSE, FUZETEC, TYCO, BOURN, RAYCHEM etc. (Inspection Consignee)
150
9
1438.5
... More
Supply of PPTC Fuse GP 250-185UL-94 certification (24V/4A) 110V AC for track chargers. Make: LITTLEFUSE, FUZETEC, TYCO, BOURN, RAYCHEM etc. (Inspection Consignee)
150
9
1438.5
... More
Supply of Resisters, condensers, Diodes, LEDs and lugs alongwith bracket and mounting arrangement as per standard Annexure-V of Central Railway. (Inspection Consignee)
5
62203
311015.5
... More
Resin cored wire as per specification No. IS:1921-1975 with Alloying element percentage as 63% SN (Tin) and / 37% Pb (Lead) with percentage of various impurities not exceeding 11 the values Sb (Antimony) 0.2% maximum , Cu (Copper) 0.1% maximum, As (Arsenic) 0.05% maximum, Fe (Iron) 0.02% maximum & other impurities mainly Al, Zn & Cd shall be limited. The flux shall be free from corrosive action as per clause 5.2 & flux percentage may be used as per requirement. (Inspection Consignee) 12
25
1402
35072.25
... More
Lacing thread rolls, black, wax coated (100 mtrs). (Inspection Consignee)
100
74
7409
... More
Supply of Main Signal Post 140 mm outer dia 4.6 Mtr Length as per spec No IRS S 6/81 with latest amendments. (Inspection Consignee)
50
7782
389116
... More
Supply of Main Signal Post 140 mm outer dia 5.6 Mtr Length as per spec No IRS S 6/81 with latest amendments. (Inspection Consignee)
25
10341
258535.25
... More
Supply of Shunt Signal Post with Base (GI Pipe of 80 mm Dia of min. 1 meter length.). (Inspection Consignee)
40
3037
121490.8
... More
Supply of Cast Iron Main signal surface base 140mm as per spec No IRS S-10 and Drg 16 No 2011/M with latest amendments, with CLS Ladder assembly complete for CLS signal 5.5/4.5/3.5 mtrs long as per RDSO Drg. No. SA-23156(Adv), SA-23153 (Adv) & SA-23150 (Adv) Alt. 1 respectively with Latest Amendment as the case may be for CLS unit & signal back staging as per extent C. Rly practice (Inspection RITES)
75
10118
758865.75
... More
Supply of Signal No.plates. as per IRSEM July 2021- Drg No.19-D10 (Sheet No. 6, 7 & 9) (Inspection Consignee)
115
584
67193.35
... More
OFF set bracket 5-1/2 " to suit 140 mm dia CLS Post with two no. of "U" Bolts with nut & washer complete as per RDSO Drg.No.SA-23080 for Signals & Routes (Inspection Consignee)
10
1119
11197.1
... More
Supply of A/AG/C/P/G/IB Board as per IRSEM July 2021- Drg. No. 19-D10 (Sheet No. 1, 2, 3, 4, 5 & 9). (Inspection Consignee)
30
629
18874.5
... More
Supply of Stop Board/IB Board as per RST-11791 (STOP BOARD)/ RDSO Drg No.7235/B as per extent C.Rly practice. (Inspection Consignee)
15
3740
56113.8
... More
Supply of different warning Boards as per Goods Warning Board (SK-784). RDSO Drg N o . SA 2380 (Adv), SA 2370/M, Block section limit Board RDSO Drg.No. SA 2373 Paint and retroreflective arrangement as per Railways drawing. (Inspection Consignee)
15
3642
54634.8
... More
Supply of Hand Cuff Locks/ Godrej Navtal lock with Three common keys. (Inspection Consignee)
400
320
128216
... More
Supply of "2 Aspect" Signal Unit in FRP body without lenses and transformers as per 23 RDSO Specification RDSO/SPN/194/2006/Rev.2.0 or latest complete and to suit LED signal Lamps and suitable for 140 mm dia post Saves pigment finish on the back side of the and inside. White Pigment finish inside the 2 aspect unit to avoid any extra paint cost. (Inspection RDSO)
20
34652
693042.8
... More
Supply of "3 Aspect" Signal Unit in FRP body without lenses and transformers as per 24 RDSO Specification RDSO/SPN/194/2006/Rev.2.0 or latest complete and to suit LED signal Lamps and suitable for 140 mm dia post Saves pigment finish on the back side of the and inside. White Pigment finish inside the 4 aspect unit to avoid any extra paint cost. (Inspection RDSO)
40
35514
1420562.8
... More
Supply of "4 Aspect" Signal Unit in FRP body without lenses and transformers as per RDSO Specification RDSO/SPN/194/2006/Rev.2.0 or latest complete and to suit LED signal Lamps and suitable for 140 mm dia post Saves pigment finish on the back side of the and inside. White Pigment finish inside the 4 aspect unit to avoid any extra paint cost. (Inspection RDSO)
-
-
25
... More
Supply of Shunt Signal Position Light Type FRP complete as per RDSO Specification 26 No.RDSO/SPN/ 194/2006/Rev.2.0 or latest with Off set bracket 3-1/2" to be fitted on 140 mm post drawing No. SA 23840(Adv) Alt-2 for dependent type complete with signal unit bracket, terminals etc without lenses, lamp, lamp holder, and to suit LED Signal lamps. (Inspection RDSO)
40
15624
624972
... More
Supply of 1 way Junction Route Indicator in FRP body without lenses and transformers as per RDSO Specification RDSO/SPN/194/2006/Rev.2.0 or latest complete and to suit LED signal Lamps. (Inspection Consignee)
10
39237
392373
... More
Supply of 2 way Junction Route Indicator in FRP body without lenses and transformers as per RDSO Specification RDSO/SPN/194/2006/Rev.2.0 or latest complete and to suit LED signal Lamps. (Inspection Consignee)
10
49763
497638.4
... More
Supply of 3 way Junction Route Indicator in FRP body without lenses and transformers as per RDSO Specification RDSO/SPN/194/2006/Rev.2.0 or latest complete and to suit LED signal Lamps. (Inspection Consignee)
5
50617
253089.85
... More
Supply of "Calling On" Signal Unit in FRP body without lenses and transformers as per RDSO Specification RDSO/SPN/194/2006/Rev.2.0 or latest complete and to suit LED sigal Lamps. (Inspection Consignee)
15
9710
145651.8
... More
Supply and Fixing of RE Protective Screens of expanded metal 12 SWG of size 1200 x 1500 mm on signals as per extant practice & as per instruction of Rly engineer at site. DRG.No.SK-844. (Inspection Consignee)
10
5751
57518
... More
Supply of Phenolic 10mm thick sheet, grade P3 in standard size of 1.22X1.22 Mtr as per spec. No IS 2036 of 1995. (Inspection Consignee)
250
5880
1470135
... More
Supply of ARA Terminal blocks with links made of PBT Specn No.IRS/75/2006(Rev-2) with latest amendments and RDSO Drg.No.SA-23741A Alt.4, SA-23745 Alt.5, SA-23746, SA-23748 Alt.4 & SA-23756A Alt.3. (Inspection RDSO)
80000
81
6505600
... More
Supply of cartridge fuse block made of PBT as per RDSO Drg No SA-23748 Alt 4, SA- 23749 & Spec No IRS S 75/2006 with latest amendment. Fuse block shall be suitable for round head type voltage fuses. (Inspection Consignee)
800
182
145992
... More
Supply of round head type non detoriating type low voltage cartridge fuse as per Specn No IRS/S/78/92 with latest amendments 2A/4A/6A capacity (Inspection Consignee)
400
77
30868
... More
Supply of Tik-tak, piano type switches,5 A (as per IS Specification). (Inspection Consignee)
250
37
9355
... More
Supply of three pole plug and socket 5 Amp (as per IS Specification). (Inspection Consignee) 38
250
258
64640
... More
Supply of Lamp 110V/24W, 2 Pin for Loc. (Inspection Consignee)
250
25
6365
... More
Supply of Apparatus Case with godown locks with detachable handle on both the doors. { Note: Separate Locking arrangement from outside alongwith handle to be provided}
-
-
4308312.5
... More
Supply of earth electrode assembly as per Drg.No. CR/S&T/SK-815 (Inspection Consignee)
300
1207
362235
... More
Supply of Microprocessor based universal earth resistance sensing unit 12 channel AC/DC as per RDSO/SPN/256/2002 with latest amendments. (Inspection RDSO)
20
163101
3262034.8
... More
Supply of Track Lead Juction Boxes as per C.Rly Drg. No.RST 11509 made from fiiber glass alongwith terminal blocks. (Inspection RITES)
-
-
42
... More
Supply of B type choke to specn.No.IRS.S.65/83 (Amd.3) with latest amendments. (Inspection Consignee)
150
4106
615946.5
... More
Supply of adjustable Track Feed Resistance disc type 7.5/15/30 ohms as per RDSO Drg. No. SA 20161-66/M (Adv) with latest amendments (with Phenolic moulded base). (Inspection RDSO)
150
1442
216408
... More
Supply of Track feed battery chargers, 110V AC input 2, 4 to 6 V DC Output to Specn.No.IRS.89/2013 Ver.1.0 with latest amendments. Charger shall be suitable for charging 80 AH battery. (Inspection RDSO)
150
2721
408291
... More
Supply of Channel Pins single groove, galvanised, 7 mm suitable for 4mm dia bonding wire as per spec No. IRS: S 17-75 Revision 3. (Inspection Consignee)
7000
2
15750
... More
Supply of PVC jacketed wire rope for Track Lead connections. PVC jacketed wire rope 47 should be of Galvanised steel wire rope 6 mm dia (6x19 stranded wire with steel core of 6 mm dia) sheathed with PVC 2mm wall thickness, overall thickness being 10 mm. PVC sheath should be made of type 6 compound as per IS 5831 of 1984 Reaffirmed 2001 and steel wire rope as per IS: 2266:2019. Reclaimed or recycled material should not be used. (Inspection Consignee)
15000
58
878400
... More
Supply of 8 SWG GI wire (4mm dia) suitable for track circuit rail bonding. As per IRS Specification S:13@ 45>46@ (Inspection Consignee)
40
97
3889.6
... More
Supply of Hydrometer, Exide make or similar for measuring specific gravity of Battery Graded acid with mounting stand in location Boxes.Consignee inspection under manufacturer certificate. (Inspection Consignee)
20
317
6353.6
... More
Supply of Electronic Timers for DAC reset arrangement 3 sec to 30 sec with 2NO/2NC contact working voltage 24V/60V DC. Siemens/ABB/L&T or SELEC (642XA programmable electronic timer switch) make. (Inspection Consignee)
150
3157
473638.5
... More
Supply of Multi strand twin twisted core shielded cable of 28-30/0.2 mm for Axle counter as per IRS spec. 76/89 with latest amedments, if any.Unit: Number = Per 100 meters (Inspection Consignee)
5
16758
83794.35
... More
Supply of Pre-wired Crank Handle cum key lock relay box (of metal) alongwith LEDs, with approved type push buttons, 8-way terminal strips, string rod, etc. as per Drawing No.RST.C.114 (Inspection Consignee)
6
11518
69108.06
... More
Supply of GI bend pipe, 'B' class, 50mm dia for cable entry in point machines, alongwith required fixing arrangements as per standard practice on Central Railway. As per Drg No. RST.11835. (Inspection Consignee)
100
283
28311
... More
Supply of William stretcher nylon insulation set suitable for ground connection as per RDSO drg No T-10367, T-10368, T-10384 as applicable and to the spec IRS S 23 & 40/84 with latest amendements . (Inspection Consignee)
100
595
59569
... More
Supply of Tongue attachment nylon insulation set consisting of one insulating plate as per Drg no: RST-106961 & 3 nos of Ferrules with collars to suite rodding supplied as per RDSO spec & Drg.no: RST-10692 (Inspection Consignee)
100
378
37890
... More
Supply Gauge Tie plate nylon insulation as per RDSO drg No: T- 10372 Alt2, T- 10368, T- 10371 Alt2, T-15083/88/Alt2 & T-11690/Alt2 and to the spec IRS S 23 & 40 with amendement 01 or latest amendements. (Inspection Consignee)
100
273
27340
... More
Supply of Ground connections, complete set suitable for IRS type/appd. point Machine for ordinary turnout with tounge attachment insulation and other insulation as per RDSO Drg. 57 S/3361@47>47?40@for IRS type point machine) or RDSO Drg No.SA-9151/52 (for Siemens point machine) with latest amendements. However the ground connection shall be procured only after confirmation from Railway engineer as per site condition /type of machine/turnout. (Inspection RDSO)
70
9151
640631.6
... More
Supply of Ground connections,complete set suitable for IRS type/appd. point Machine 58 for derail switch with tounge attachment insulation as per RDSO Drg. S/3361@47>47?40@for IRS type point machine) or RDSO Drg No. SA 9151/52 with latest amendements. However the ground connection shall be procured only after confirmation from Railway engineer as per latest site condition /type ofmachine/turnout. (Inspection Consignee)
30
7999
239984.1
... More
Supply of Point Machine Raised Bracket FRP make with cover as per Drg No.SK-846. (Inspection Consignee)
100
984
98422
... More
Supply of GI pipe, inner dia. 100mm dia. B-class as per spec. No.IS 1239 PT. 1/2004 or latest with sockets and fittings. TATA/JINDAL/ZENITH BIRLA make. (Inspection RITES)
2000
1152
2305680
... More
Supply of DWC HDPE pipe with one snap fit coupler and 'O' ring fire resistant, anti rodent, in 6 meter length of size 120 mm outer dia as per RDSO/SPN/204/2011 Ver. 1.1 with Amd.1 or latest. (Inspection Consignee)
1000
353
353690
... More
Supply of RCC pipes half round of size 150mm dia outer and 100 mm dia internal 1 mtr long matching to IS No. 458/2003 amendment-1 with Rev.4. (Inspection RITES)
5000
238
1190850
... More
Supply of RCC pipes half round of size 300mm dia outer and 250 mm dia internal 1 mtr long matching to IS No. 458/2003 amendment-1 with Rev.4. (Inspection RITES)
15000
487
7317900
... More
Supply of "C" Channel Clamps with nut bolts, washers and all type fixtures for 6 inch dia pipe to be fixed on GIRDERS, on rock cuttings etc., as per DRG No.SK-900. (Inspection Consignee)
200
2485
497074
... More
Supply of Modular terminal block of 2.5 sq.mm 2 IN 2 OUT type disconnect type 65 terminal along with as per RDSO/SPN/189/2004 Rev 3.0. The current capacity of 16 Amps and more. The terminal should have marking at centre to view description from front. Material to be procured from RDSO approved firms only. (Inspection RDSO) 66
5000
128
644350
... More
Supply of DIN Channel for the terminals 1 Mtrs each. (Inspection Consignee) 67
500
238
119240
... More
Supply of End plates for modular terminal block. (Inspection Consignee) 68
500
25
12870
... More
Supply of End Clamp for modular terminal block. (Inspection Consignee) 69
500
18
9250
... More
Supply of Marker Card as per customer spec. (10x10) (Inspection Consignee)
500
92
46110
... More
Fuse terminal block with LED indication upto 2.5 sq.mm screw type one in one out (suitable for (400 mA, 630mA, 1A. 1.6A, 2A, 4A, 6.3A & 10A) as per RDSO/SPN/189/2004.(without fuse) (Inspection Consignee) 71
500
200
100050
... More
End plate for through terminal block with LED indication. (Inspection Consignee) 72
50
14
749.5
... More
Fuse links of (400 mA, 630mA, 1A. 1.6A, 2A, 4A, 6.3A & 10A) (Inspection Consignee) 73
500
47
23735
... More
Shorting link insulated Grey in colour. (Inspection Consignee)
500
16
8115
... More
Operating tool (operating tool, screw driver & stripper) as per Annexure-VII. (Inspection Consignee)
5
9529
47646.25
... More
Tool bag complete with Megger as per Annexure-VIII. ADD AC/DC clamp meter, with Hand Held Tool Bag. (Inspection Consignee)
5
57453
287265.45
... More
Supply of Digital measuring wheel for measuring cable trench/route make: Stanley or Freemens make or similar reputed make. (Inspection Consignee)
2
5132
10265.28
... More
Supply of Adhesive Tapes rolls, PVC (18mmx25Mtr) Steel Grip/SCOTCH/ANCHOR. (Inspection Consignee)
6
36
221.16
... More
Supply of Thermo shrink Cable Jointing kit (Reinforced) TSF-2 type generally conforming 78 to RDSO specification RDSO/SPN/TC/57/2015 Rev 1 with modified kit contents as per CSTE's Specification No.CR/SPN/TC/57(A)/2015 Dt. 06.01.2015(Table-A) to be suitable for jointing both 10/20/50 pair PIJF and 4/6 Quad cables along with sub-kit (Table-B) for armour continuity. (Inspection Consignee)
50
3292
164610.5
... More
Supply of various types of Track Magnets complete alongwith 6 pin coupler including fixing clamps Siemens make S 25432 - MI (IND) . Frequency F-1 to F-5 of functional equivallent. (Inspection RDSO)
50
184807
9240361
... More
Supply of Wooden Blocks (Rail deflectors) as per drg.No.BB/SK/C/9 (Inspection Consignee)
50
522
26124
... More
Supply of Opto coupler box & safety cover of FRP for fixing Siemens type opto coupler cards inside box for installation of AWS with mounting clamps as per C. Rly. Drg. & practice. (Inspection RDSO)
50
22495
1124755.5
... More
Supply of Opto coupler card of suitable type of Siemens make or fuctional equivalent. (Inspection RDSO)
50
18530
926515
... More
Supply of PVC flexible wire size 30/0.25 mm annealled copper conductoer as per IS 83 694:1990 of Finolex make or similar for connecting Opto copler box to signal transformer fixed inside unit/location box as per C. Rly Grg. No. RST-11545 in different colours of Green. Yellow, Red, White, Blue, Black & Grey. (Inspection Consignee)
1000
34
34070
... More
Supply of GI reducer of size 40 mm/20 mm as per IS 1239 PT.1/2004 or latest medium class for installation of AWS. (Inspection Consignee)
100
238
23841
... More
Supply of stainless steel clamps of SS-304 type and size B for fixing Neoprene rubber tube on reducer & six pin coupler of track magnet and PVC conduit pipe with glands fixing on signal pots & Optocoupler box as per C.Rly. Drg. No. RDS: 11545. (Inspection Consignee)
250
95
23995
... More
Supply of coupler lugs of various size of Dowell's make or similar for terminating cable conductors inside opto coupler boxes, junction boxes and on signal transformer for installation of AWS as per C.Rly. Drg. No. RDS: 11545. (Inspection Consignee)
1500
55
83550
... More
Supply of Brass Gromet of suitable size for taking out wires from signal post Comet make 2125 & 2118 or similar. (Inspection Consignee)
100
157
15794
... More
Supply of Neoprene Rubber pipe of suitable size for taking 7 core cable from reducer to six pin coupler of track magnet for installation of AWS. (Inspection Consignee)
250
1238
309595
... More
Supply of Dowell;s crimping tool of Model make 3D-2 109/108 suitable for crimping lugs from size 0.5 mm to 16 mm. (Inspection Consignee)
6
16973
101838.42
... More
Supply of reinforced PVC conduit pipe of internal dia of 25 mm for taking able conductor from signal post to opto coupler box as per C.Rly. Drg. No. RST: 11545. (Inspection Consignee)
250
318
79722.5
... More
Supply of 7 core PVC insulated cable having each core made up of 30 x .025 mm tinned stranded wires for AWS generally confirming to IRS : S-63/89. (Inspection RITES)
650
1323
860333.5
... More
Supply of six pin couplers and clamps for fixing with rail suitable for both 52 Kg & 60 Kg. for track magnets. (Inspection RITES)
200
22738
4547780
... More
Supply of 40mm dia GI pipe confirming to No. IS 1239 PT.1/2004 or latest with sockets and fitting. TATA/JINDAL/ZENITH BIRLA make. (Inspection Consignee)
650
389
252850
... More
Supply of field testing equipment for Siemens make AWS Track Magnets complete with battery. (Inspection RITES)
1
685111
685111.31
... More
Supply of Portable work station for Data input & configuration with necessary 95 software/Autocad latest version programmes/Accessories, simulation and functional testing, diagonostics and trouble shooting and commissioning of EI system. Suitable Table & chair of reputed make shall be supplied by the Contractor. The specifications of teh PC/Laptop should be got approved from the Engineer In-charge before supply. Note : Portable work station should strictly adhre to specification as per Annexure-I. (Inspection by Consignee)
2
210399
420798.8
... More
Supply of Paints as per relevant IS specification preferably Asian/ Apcolite/Dulux make in different colours in 1 Kg/2 Kg pack (Inspection by Consignee)
200
388
77700
... More
Supply of Electrically operated LIFTING BARRIER complete set without Hand Generator, Operating on 110V AC with Boom length 9.76M along with one spare boom confirming to RDSO/SPN/208/2012 Ver.2.0 with amendment 1 or latest amendment. 98
6
416756
2500536.12
... More
Supply of Sliding Boom complete as per Central Railways practice Drg.No.SK-860(1-3/3)
6
302384
1814305.98
... More
Electronic LC gate Telephone System as per Specification RDSO/SPN/TC-51/2011 Revision-3.0 (With Vooice logging facility)
-
-
337331.63
... More
Supply of Electronic Solid State Flasher Unit for Road Traffic Signal 24V DC. ACES/Muconny make with operating voltage 110V AC.
6
2520
15125.4
... More
Supply of Dual Tone Warning Bell with 20W horn and 15W Amplifier ACES/Muconny make with operating voltage 110V AC.
3
8816
26448.36
... More
Supply of LED type Boom Light suiutable for 110V AC color Red flashing body enclosure MS, CRC with mesh.
6
1171
7029.24
... More
Supply of Electronic Magneto Group Phone 2 wire (EMAG) DTMF signalling 3V operated Specification IRS TC-79-2000 amendment no.4 or latest. TUMALA/ACES make.
3
3744
11233.92
... More
Supply of Signal unit including post & unit (2 aspect) without LED Lamps to provide indication to the road user. The signal unit shall be of FRP type. RDSO/SPN/194/2006/Rev.2.0. The complete arrangement shall be got approved by engineer incharge before supply and erection.
6
24740
148445.82
... More
Supply of Automatic changeover for individual supply. Automatic changeover unit of 105 signal/Track/ DC circuit supply of 32A, AC/DC consisting of 3TC44 contractors, LED Lamp, Push Button, terminals, VSR, polarity switches. As per Rly. Drg.-SK-841/1-5 for IPS supply to mannual discrete equipments with P/switch. (Inspection RITES)
100
32399
3239936
... More
Installation of Cable Termination Racks Assembly complete including wall supports, 1 scaffolding, Disconnecting links/ARA terminal, 96 way tag block with tag cover & other necessary accessories etc. The work shall be done as per approved plan, extant practice on C. Railways & the instruction of Rly engineer at site.
20
1205
24117.4
... More
Charging of 2V Lead Acid Batteries with contractors own battery grade sulphuric acid 2 and distilled water with minimum two charge - discharge cycles, installation of charged batteries in groups & their connection & wiring. The work shall be done as per extant practice of C.Rly & instruction of Engineer-in-charge.Detailed measurements of initial charging shall be recorded jointly by contractor & Rly's site-in-charge.
500
81
40505
... More
Preparation of cable route plan, cable coreage plan, location particulars, Cable termination rack particulars, cable meggering report, earth resistance particulars, Traction bonding diagram, 1/2 wire count sheet and any other drawing in Autocad in A3/A4 size.The contractor shall initially supply 3 sets of circuits complete for approval of Railways. Railways will return one set to the contractor duly approved with alterations/corrections if any. The contractor shall incorporate Railways alterations/corrections in the tracings without any deviation and submit all tracings complete in all respects to the Railways . This includes submission of final cable route plan as per laid cable duly measured at every 30m clearly indicating distance of laid cable from fixed point of reference & indicating all track crossings and tail cables. This also include designing of cable coreage plan based upon I.P in consultation with engineer-in-charge. For small/medium yards (<= 100 routes)
-
-
3
... More
Excavation and Casting of Main signal foundation as per Drg No SK 801 with 4 contractor's own materials including cement and anchor bolts of standard size. The required scaffolding Ferma etc for Casting of foundation will have to be brought by the contractor at his own cost.
75
8443
633280.5
... More
Excavation and Casting of Shunt signal foundation as per Drg No SK 802 with 5 contractor's own materials including cement and anchor bolts of standard size. The required scaffolding Ferma etc for Casting of foundation will have to be brought by the contractor at his own cost.
40
2444
97796.8
... More
Erection of CLS Post with Surface base and signal unit on top or on OFF set Bracket, 6 fixing of front and back staging, ladder and guards, signal name plates/boards if any with contractors own brackets and fixing materials. This also includes erection of auxiliary signals like calling on, shunt signal if any. The work shall be done as per instructions of Rly engineer at site.
75
3221
241579.5
... More
Erection of shunt signal with Surface Base, Post, Signal unit and fixing of No.plates. The work shall be done as per instructions of Rly engineer at site. 8
40
444
17772.4
... More
Fixing of Jn.Route Indication 1-Way/2-Way/3-Way on the top of the signal post.
25
704
17620
... More
Fixing of Stop Board, Block section limit Board, goods warning board with contractors own material. The work shall be done as per instruction of Rly engineer at site.
30
510
15318.3
... More
Termination of tail cable on Main signal units and wiring with contractor own material etc. The work shall be done as per instruction of Rly engineer at site.
75
1011
75879
... More
Termination of tail cable on Shunt signal units and wiring with contractor own material etc. The work shall be done as per instruction of Rly engineer at site.
40
328
13150.4
... More
Fabrication and fixing of phenolic laminated/Fibre glass sheet in location box by 12 providing all fixtures as per Railway Drawing including fixing of PVC coated/with PVC pipe covered string rods at the back side for cable support with contractor's own materials. The work shall be done as per drg and arrangement similar to SK 783-1&2. with latest alterations & as per instructions of Rly engineer at site.
-
-
507201.5
... More
Fixing of cutting in relay bases & wiring of relays with Contractors own material obtained from approved sources in location box as per the instuctions of Engineer in charge.
150
522
78385.5
... More
Fixing of ARA Terminals and fuse blocks on phenolic laminated sheets and fixing by stainless steel/brass nuts & bolts.This includes provision of two additional holes on the board on either side for cable conductor entry. Unit: Number = Per 100 conductor
80000
12
1037600
... More
Termination of cable cores on ARA terminal/fuse blocks in the apparatus Cases/ cable 15 termination rack.This includes all associated works of pulling out the cable from underground. The work shall be done as per location plans and instructions of Rly engineer at site.Unit: Number = Per 100 conductor
80000
9
780800
... More
Excavation and Casting of Apparatus Case foundation with contractors Anchor bolts, cement, ballast and other materials. The required scaffolding Ferma etc for Casting of foundation will have to be brought by the contractor at his own cost.
-
-
2272222.5
... More
Erection of Apparatus Cases. This includes filling of location foundations and plastering
-
-
241544
... More
Installation of Eqpt. (Relays, resistance, chargers batteries etc.as applicable) & wiring of the same in apparatus Cases as per location diagrams & circuit diagrams, as per Instruction of site incharge and practice.
-
-
323408.5
... More
Installation of earth electrode assenbly as per Drg.No.RE/S&T/SIG/Tender/SK726/85 including earth wire connected through GI wire 8 SWG supported on M.S. flat of size 6mm x 40 mm to earth electrode as per drg. No. CR/S&T/SK-815 for sigg. Equipment such as lever frames, apparatus 19 case, signals, relay racks,block insruments, and etc. as per RE manual. The earth value should be less than 10 Ohms including the lead wire. The value should be measured in presence of Rly. supervisor. It should be documented and painted on earth enclosure made of concrete.( only earth electrode will be supplied by Railway). All other material required for provision of earthing will be brought by the contractor.
320
2333
746614.4
... More
Fabrication, supply and fixing of various types of MS flat clamps on girder bridges/rocky area on GI pipes/ its coupler as per drawing with requisite no. of nut and bolts as per site requirement and as per instructions of Railway engineer at site. 21
100
198
19810
... More
Connecting main earth electrode to BRC using 35 sq.mm copper cable.
150
85
12817.5
... More
Installation of 25 x 6 mm copper tape (bonding ring conductors) mounted on insulated standoffs (1 round)
150
191
28740
... More
Installation, wiring, testing & commissioning of Microprocessor based universal earth leakage detector unit 12 channel AC/DC.
20
8172
163444.4
... More
Erection, Fitting and Rail connection of Track Lead Juntion Box on two 24 supports(M.S.angle) with contractor's fixing material and PVC jacketed wire for track lead connection including angles of size 40 x 40 x 5 mm 1200 mm length. This will include drilling of holes for track lead/side connections on rail. The work shall be carried out as per Drg. No. SK-845 or/& instructions of Rly engineer at site.
500
1204
602335
... More
"Provision of bonding with contractor's PVC jacketed wire rope for Track Lead connections. PVC jacketed wire rope should be of Galvanised steel wire rope 6mm dia (6 x 19 stranded 25 wire with steel core of 6 mm dia ) sheathed with PVC 2mm wall thickness, overall thickness being 10mm . PVC sheath should be made of type 6 compound as per IS 5831 of 1984 Reaffirmed 2001 and steel wire rope as per IS:2266:2019. Reclaimed or recycled material should not be used. This will include drilling of 7.1mm dia holes in rails (4 Nos) and provision of two jumpers for each bond, clipping of bonds etc. with contractors own materials and tools as per instruction of Rly engineer at site."
700
187
130956
... More
Provision of bonding with GI wire 4mm dia ( 8 SWG) for track jumper & fish plate joints bonds. This will include drilling of 7.1mm dia holes in rails (4 Nos) and provision of two jumpers for each bond, clipping of bonds etc. with contractors own tools as per instruction of Rly engineer at site.
700
148
103677
... More
Installation, wiring & testing / commissioning of Multi Section Digital Axle Counter's Central Unit/Evaluator/Processor for the section /at station including its associated all indoor equipments, indication panel, monitoring console/interface computer and wiring the same to integrate 27 with the relay circuits including supply of required power cable of multi -strand 10 Sq mm or more from power room to Central Evaluator, 2 core shielded cable of required size copper conductor as per IRS (S) 76/89(Amd.3) or IS 694/2010 with latest amendment as applicable with other accessories as per the instructions of Railway Engineer at site and earthing as per OEM's technical requirement and specifications. This also includes laying & termination of cable if any from Panel Room to Axle Counter room /Relay room in DWC pipe with contractor's material / existing ladder. Unit: Number = Per dp
200
2667
533460
... More
Installation, wiring & testing / commissioning of Axle Counter's Reset Box of all types in 28 Cabin/Panel room and wiring the same to integrate with the Axle counter as per the instructions of Railway Engineer at site . This includes laying & termination of cable if any form Panel Room/Axle Counter room /Relay room to Reset Box in DWC pipe / existing ladder.
6
7064
42389.88
... More
Installation of complete assembly of track device/double rail contact unit for entry or exist with conductors all material including drilling of required sizes holes on rails for fixing these, taking the cable lead through anti-rodent, anti-oxidnat & non-flame propagating type Double walled corrugated (DWC) pipe as pr RDSO/SPN/204/2011 Ver.1.1 with Amd.1 or latest from track device to location box and terminating it on terminals including digging of trench under track and upto location/Track side unit and all other accessories as per site requirement for laying of transmitter and receiver cable with suitable wire embeded rubber pipe with clamp for protecting these cables at DP end. Unit - Number = Per track device/double rail contact
-
-
29
... More
Installation of complete assembly of deflectors on either side of track device/double rail contact unit including drilling of required sizes holes on rails for fixing these. Unit Number = per Dp
200
883
176624
... More
Supply, fixing & wiring of mismatch panel depcting Indication Panel/VDU layout with 31 contractors own material like LEDs for each track section, flexible wire, connecting terminals, buzzer etc. The work shall be done as per extant practice on C.Rly. & instruction of Rly. Enginer at site. Unit Number = per station
6
46255
277535.76
... More
Refixing of electrical point machine, ground connection during phase working (Non 32 interlocked working) after removing the existing fitting if any, adjustment if necessary, cable termination,wiring , testing and commissioning of electrically operated point, fixing and connecting point indicator on derail switch if necessary. The work shall be done as per extant practice on C. Rly & the instruction of Rly engineer at site. unit Number = Per T/O
10
4779
47792.2
... More
Fixing of point machine on newly laid turnout o n Wooden/MBC sleepers , fixing of ground connections, adjustment and testing with crank handle operations,Removal of ground 33 connection & point machines duly numbered. This will include fixing of bend pipes with welded frame for cable entry to machine. This will also includes necessary adjustment and smithy work, drilling of holes to tounge rails, fitting of insulation for tounge attachment, gauge plate & stretcher bars, cable termination & wiring if required. The work shall be done as per extant practice on C. Rly & the instruction of Rly engineer at site. Unit Number = per T/O
60
3254
195288
... More
Installation, fixing and wiring of Boxes for Key Lock Relays with contractor's wiring & fixing material. The work shall be done as per extant practice on C. Rly & the instruction of site engineer.
100
2878
287883
... More
"Excavation of cable trench as per cable route plan,1.0 mt. deep and 300mm wide along side the track in normal soil/strata, conforming to distances as per cable route plan and refilling after cable laying. This work includes covering of cable laid in trench by loose soil for a layer of 50mm 35 thickness after clearing of route,bushes etc. It shall be ensured that top of the cables laid is at a depth of 0.8m or more. It if is less, then the width and depth shall be suitably increased and accordingly proportionate payment shall be made. In case depth of trench is not achievable due to site conditions proportionate payment will be made as per procedure. The work shall be done as per the extant practice on Central Railway and instructions of Railway Engineer at site. Drg. No. SK 805" Unit Number = Cu.Mtr.
4500
323
1453545
... More
"Excavation of cable trench as per cable route plan,1 mt. deep and 300mm wide along side the track in hard soil, conforming to distances as per cable route plan and refilling after cable laying. This work includes covering of cable laid in trench by loose soil for a layer of 50mm thickness 36 after clearing of route,bushes etc. It shall be ensured that top of the cables laid is at a depth of 0.8m or more. If it is less, then the width and depth shall be suitably increased and accordingly proportionate payment shall be made. In case depth of trench is not achievable due to site conditions proportionate payment will be made as per procedure. The work shall be done as per the extant practice on Central Railway and instructions of Railway Engineer at site. Drg. No. SK 805" Unit Number = Cu Mtr
5400
538
2907036
... More
"Cutting of all types of Roads/ platforms (ecxcept concrete type) for trenching and 37 excavation to depth of 300mmx300mm wide approx. and refilling after laying of RCC/GI /DWC pipe & to restore them to original condition. The work shall be done as per extant practice on C.Rly & instructions of Rly engineer at site. Drg. No. SK 807" Unit Number = Cu Mtr
480
2691
1292035.2
... More
Fixing of GI pipes for crossing the culverts, bridges etc. and concreting of ends with brick masonry at both ends as per the instruction of Rly engineer at site.
400
64
25832
... More
Digging of trench1.0 M. deep from rail flange/road level (for LC) and 0.3Mtrs. to .6 Mtrs wide and back filling after placing of DWC/RCC/GI pipe.(placing of DWC/RCC/GI pipe covered separately). The ballast disturbed be screened and dressed as required by Engineer-in-charge or his representatives and road tarred immediately. Drg. No. SK 806 Unit NUmber = Cu. Mtr
-
-
39
... More
Laying of DWC/RCC pipes alongwith collars/RCC Half round pipes in trenches at places of track and road crossings, platform cuttings etc. 41
1000
52
52460
... More
Laying of signalling/Power/Telecom cable of various cores/sizes in trenches.
900
4796
4316931
... More
Placing and securing of cable route markers in trenches at the specified interval and at diversions, joints etc along the cable route. The work shall be done as per extant practice on C Railways & the instruction of Rly engineer at site.
2600
11
30056
... More
Jointing of 4 / 6 quad cable with Heat Shrinkable straight through Jointing Kit for 4 / 6 quad cable.
50
3287
164373.5
... More
"Wherever depth of 0.5M cable trench is not feasible, cable shall be protected as 44 under:- Preparation of cement mixture 1:3:6 with contractor's own materials and spreading cement concrete mixture layer of 100 mm thick over the already laid cables in the excavated trench." Unit Number = Cu Mtr
900
4918
4426686
... More
Fixing of modular terminal/fuse blocks alongwith all accessories with provision of fixing 45 holes on hylam sheets/side angles of Loc Box and fixing by galvanised nuts & bolts. This includes fixing of DIN channel alongwith PVC Comb type 'C' channel (size 2 inch x 2 inch) for cable termination on modular terminal. The PVC channel with cover to be supplied by firm as required. The work shall be done as per the instruction of Rly engineer at site.
4
17
70.32
... More
Laying of GI pipes in on bridges/culverts/concrete drain/mountain ridges etc. with 46 suitable GI bend shall be provided where there is turning of pipe as per the instruction of Site engineer. GI clamps at every 2m as shown in the drawing to be fixed. Suitable holes to be made in the pipe before laying as per the instruction of the site engineer 10mm dia Drg. No. SK 808.
500
132
66235
... More
Laying of GI pipes inside the excavated trench in rocky area /less depth area as per 47 instructioin of Site engineer. GI clamps at every 2m as shown in the drawing to be fixed. Suitable GI Bend/Coupling and holes to be made in the pipe before laying as per the instruction of the site engineer
3000
67
202710
... More
Releasing of cables from old location boxes and taking it into new location boxes. This 48 includes excavating the earth to release the cables from old location box for taking it into new location. This also includes releasing the old location box and bringing it to nearest station / central cabin. Location (old) will be released only after ensuring all working cables have been shifted in New location. Unit Number = Per Location
35
1916
67066.3
... More
REMOVAL OF PSC/Wooden SLEEPERS coming in the way of/route of cable trenching, signal/location foundation/Track crossing etc. These obstruction will be removed by contractor for ensuring proper execution of related works. Unit Number = Nos
200
129
25998
... More
REMOVAL of Redundant/old railscoming in the way of/route of cable trenching, signal/location foundation/Track crossing etc. These obstruction will be removed by contractor for ensuring proper execution of related works. Unit Number = Nos
200
130
26086
... More
Fixing of "C" Channel Clamps on Girders. Along with proper coupling of GI/DWC pipes. 51 The work will be executed as per instruction of site incharge and site incharge may take decisioin as per site condition. All the fixtures, nut bolts, tolls required to fix the channel will be provided by contractor. Proper safety equipment like Helmet, Retereflective Jacket and whistle, flag is to be made available during execution of work. Unit Number = Nos
150
325
48856.5
... More
Termination of Tail cable inside the point machine through bend pipe. This includes preparatory works of pulling the cables, and peeling out the insulation, dressing and lacing after 52 termination etc., pulling of tail cable as per circuit requirement inside point machine through bend pipe, termination of cables on terminal blocks as per instruction of site supervisor. The cable shall be entered in such a way that, armouring shall protect the cable near sharp edge of entry point and armouring shall be clamped between pipe fixing bracket and body of point machine.
100
356
35607
... More
Shifting of existing Full Location Boxes coming in the alignment of doubling. The work includes loosing & removal of soil around location boxes by excavating soil around foundation, making of pit for shifting of location box horizontally opposite to railway track up to 0.5 to 1.0 mtr. This 53 includes loosing of existing cable coils without any damage. The excavated soil shall be back filled after shifting of Locaion Boxes. Location box along with its foundation shall be shifted by push method with the help of jacks or by crane by contractors own expenditure under instructions of engineer in- charge at site. Any minor repairs in foundation due to patching shall also be carried out by contracor as per instruction of Engineer incharge. The work may affect train working hence the work shall be done as per margin only or during traffic block only.
40
5027
201102
... More
Shifting of existing Half Location Boxes coming in the alignment of doubling. The work includes losing & removal of soil around location boxes by excavating soil around foundation, making of pit for shifting of location box horizontally opposite to railway track up to 0.5 to 1.0 mtr. This 54 includes loosing of existing cable coils without any damage. The excavated soil shall be back filled after shifting of Locaion Boxes. Location box along with its foundation shall be shifted by push method with the help of jacks or by crane by contractors own expenditure under instructions of engineer in- charge at site. Any minor repairs in foundation due to patching shall also be carried out by contracor as per instruction of Engineer incharge. The work may affect train working hence the work shall be done as per margin only or during traffic block only.
10
4049
40491.6
... More
Transferring of signalling/Telecom cables from existing location box to New location box. The work include breaking/dismantling of existing foundation of locations, excavating and removing /segregating coils of this cables which may be of about 10 mtr in length .These cables are then to be disconnected and removed from the existing locations one by one as per the instructions and under the supervision of railway staff present at site. The cable is then to be inserted and 55 terminated in new location box. The item includes neatly dressing of cables marking wiring tree etc. The material required for dressing /lacing will be arranged by contractor at its won cost. The work is required to be done systematically and with due precaution during the night block of 2.00-2.30 hrs each or within the time that may be allowed. The excavation work to be done carefully without damaging the cables to avoid undue failures. (Termination charges will be given separately) Note: Proportionate payment will be made if cable is of other length. 2/6/12/19/24/30 core signalling cable/4 or 6 Quad/PIJF/Any Signalling/Telecom Cable(One no. unit= One cable of 10 m length).
10
435
4356.9
... More
Laying of RCC half round cement pipe of appprox. Size (150/300mm dia X 2 mtr. length) inside the trench after laying of cable. Pipes shall be placed as per directives of site engineer.
20000
33
672800
... More
"Painting of two coats of synthetic enamel paint over one coat of primer on the following after scraping & cleaning surface wherever necessary with contractor' own supply of 57 paints.Wherever required contractor shall apply coating of epoxy paint also as per instructions of site- in-charge.Epoxy paint will be supplied by Railways. NOTE:- The paint and primer should be from M/s Asian paints Co. Ltd.,. The paints will be primer (IS 5660 of 1970) the Aluminium synthetic black enamel (IS 2932 of 1974) brilliant white and yellow Painting two coats of enamel paint over one coat of primer."
-
-
229976.45
... More
Lettering / Numbering of Signals, Point Machine, Track Lead Junction Boxes, Block Joints, Apparatus Cases etc. (each item to be taken as One Unit) This work will be carried out as per the standard practice being followed in Central Railway.
1000
52
52270
... More
Lettering / Numbering Termination particulars, equipments names etc., legibly and neatly inside location boxes.
-
-
55563
... More
Releasing of Existing Panel, Power Equipments,relays and relay racks, CT racks, 60 Batteries, Block Instts., Ground frame/s, Location Boxes, TLJBs, Signal Posts, Signal Units, Equipment inside the location boxes, Lifting Barrier , rodding runs,etc as applicable including the breaking of foundation etc. as per the instructions of Rly Engineer at site & their transportation to nominated depot.
6
37787
226725.96
... More
Fixing of Track Magnets as per C.Rly. Drg. No. RST-11545 with anti theft clamp as per Drg. No. RST-11472/4 and C.Rly Drg. No. BB/SK/C-23. 62
50
711
35581.5
... More
Fixing of Wooden Blocks as per instructions of Rly engineer at site.
50
186
9349.5
... More
Fixing of Opto-Coupler Junction Box on signal post and providing cable glands (25mm dia) on signal post after drilling holes and tapping threads on signal post as per Drg.No.RST-11545
50
948
47440.5
... More
Laying & fixing of GI pipe of 40 mm dia in trench & along signal post from track magnet 64 to opto coupler box and connecting to opto coupler box on the signal post with proper clamps , elbow bends etc. as per C. Rly. Drg. No. RST : 11545 (1/3) . [ Clamps for fixing materials including GI nut - bolts of suitable size are to be supplied by contractor.] Unit Numbers = Per track magnet
50
542
27139.5
... More
Laying of 7 core PVC insulated cable through GI pipes and Neopren rubber pipe 65 between opto coupler box and six pine coupler of A1 type track magnets as per C. Rly. Drg. No. RST : 11545 (1/3) . Termination of cable conductor on opto coupler card with the help of cripping lugs with proper dressing PVC numbering sleeve is to be provided.
50
520
26029
... More
Laying of flexible wires between main / route/ Auxilary signal units and opto coupler box 66 through signal post and reinforced PVC flexible conduit pipe and termination at both ends with appropriate size copper lugs as per C.Rly. Drg. No. RST: 11545. Wires are to be laid only after proper lacing and dressing with lacing threads, PVC flexible pipe is to be properly fixed with glands on signal post and opto copler units.
50
271
13569
... More
Installation ,testing and commissioning of electrically operated lifting barrier, complete 67 with Casting of cement concrete foundation for pedestal and boom rest post, cabling power supply connection & wiring with complete outdoor work. All the materials, tools required for commissioning of LC Gate will be arranged by the contractor. (as per Central Railway standard practice)
6
16510
99064.38
... More
Excavation and casting of foundation for sliding Boom with Contractor 's own materials 68 including Cement and Anchor Bolts of Standard Size. The required scaffolding, Ferma etc for Casting of foundation will have to be brought by the Contractor at his own cost. The work shall be done as per instructions of Rly engineer at site.
6
75509
453058.68
... More
Erection of sliding boom assembly right hand, left hand with fixtures. All the materials, tools required for erection of sliding boom will be arranged by the contractor. (as per Central Railway standard practice)
6
10056
60336.54
... More
Installation & commissioning of sliding boom with E-type lock and HKT, this include wiring of HKT, running of cables, necessary painting and transportation of material from store to site. All the materials required for commissioning of sliding boom will be supplied by the contractor.
6
9519
57115.32
... More
Erection of road signal with all accessories incluidng fixing of road siren in Road signal unit as per as per instructions of Rly engineer at site-in-charge.
6
5979
35874.9
... More
Testing of Track Magnets by test jig and commissioning of complete AWS equipments as per standard practices on Central Railway and instruction of site incharge after installation at site. (Testing report is to be submitted before commissioning).
50
1037
51864
... More
Supply of Lamp Holders, two pin, Bakelite type for apparatus case. (Inspection Consignee) 2
250
46
11685
... More
Supply of cable route marker as per RST/C/203A of FRP. (Inspection RITES)
2500
311
779525
... More
Supply of Tool kit for Digital Axle Counter as per Annexure DAC toolkit . (Inspection RITES)
6
142621
855728.7
... More
Supply & installation of Deminineralisation Plant (Distilled Water Plant) with design & engineering. (Inspection Consignee)
1
348598
348598.47
... More
Fabrication, supply and installation of wiring tree set for use in point machine (both for point operation and NKR/RKR) as per drawing approved by railways. (Inspection Consignee)
100
655
65509
... More
Supply of President rack with minimum 19" width for accomodating "Crank Handle Relay arrangment" with two nos. of doors, accessories and mounting arrangement for Crank Handle arrangenent. (Inspection Consignee)
-
-
6
... More
Supply of GPS tagging featured cable route locator / tracer set suitable for detecting 7 underground armoured optic fiber cable (OFC) and signaling cables with LCD Graphic Display active / passive modes and depth range 3. M - 10 M. Model STLOC 10 GPS make Stanley or equivalent. (Inspection RITES)
3
498197
1494591.69
... More
Supply and commissioning of Thermovision imager alongwith drive & power tools & equipment spares as per RDSO specn. No. TI/SPC/OHE/TIPS/1030 (6/2005) Rev-1 or latest. (Inspection RDSO)
2
371400
742801.6
... More
Supply of Digital Ground Tester model DTE3TD part No.DTE3D 2 & 3 Terminal Earth Tester, Digtal display with case & kit. (Inspection RITES)
8
80389
643118.24
... More
Supply and installation of PC Workstation for viewing, monitoring and system 10 management including all required license software (like OS, MS Office, 3 year Antivirus, Video Management software etc.), as per RDSO specification RDSO/SPN/TC /65/2019 (Rev 5.0) or latest with all accessories, including Monitor, Keyboard, mouse, spike buster, minimum 500 VA UPS, mounting rack etc.. (Inspection by Consignee)
5
145693
728469.45
... More
Chair with arm Godrej make model no PCH- 7002 or similar for Announcer room. (Inspection by Consignee)
30
5999
179991.6
... More
Steel Cupboard (plain storwel) size 6' X 3' Godrej Make or similar. (Inspection by Consignee) 13
15
12203
183051.9
... More
Godrej make - Versa Neo Visitor Chair, Annexure-B (Inspection by Consignee)
50
10591
529553.5
... More
Godrej make - Executive Chair - Motion Ergonomic High back Chair in carbon Black Colour, Annexure-C (Inspection by Consignee)
5
13310
66551.65
... More
Godrej make- Ace Full Back Chair with black headrest, in black ink. Annexure-D (Inspection by Consignee)
5
23619
118097.1
... More
Godrej 2 Door LFC lateral Filing cabinet (2 Drawers) - Dimensions (L) minimum 90cm , Annexure-E (Inspection by Consignee)
10
33079
330796.1
... More
Wood Rectangular T9 Godrej office table Type-Modular, Annexure-F (Inspection by Consignee)
5
17254
86270.65
... More
Space Planners Movable File Storage System (Compactor ) 5-Bay Mechnized Drive Type as per attached Annexure-G (Inspection by Consignee) 19
2
744392
1488784.5
... More
Round hat with Indian Railway logo with strip (Inspection by Consignee)
50
205
10260
... More
Supply and installation of RO water Purifier having Ultra Violet lamp, Input water TDS 20 1000 Ltr and Output water capacity 10 ltr/per hour, Output water of RO system confirming to IS 10500 (latest), number of candles 04 Nos. wall mounted type confirming to IS 14724 (latest) with 2 year warranty of make KENT (Grand plus), aquaguard, Eureka Forbes. (Inspection by Consignee)
1
15363
15363.65
... More
Supply of BIS listed semi-automatic stainless steel preventive device with UL approved clean gas with auto manual reverse stainless steel vlve 'NASA 400 MAR' having capacity of 04 kgs and made of stainless steel 304 grade as per Technical Specification. (Inspection by Consignee)
30
38586
1157580
... More
Canon Multifunction Machines Mfm, On Site OEM Warranty 1 Year. iR ADV DX 4925 with DADF, Wireless Lan and Toner. (Inspection by Consignee) 23
1
245590
245590
... More
Supply of design set for circuits as per the annexure provided (Inspection Consignee)
5
134565
672829.8
... More
Supply of HP Laser Colour Computer Printer for A-4 size, similar to Model HP Colour Laser Jet Pro M255dw with 3 years warranty. (Inspection Consignee)
-
-
24
... More
"Supply of Digital Axle Counter Multi section type complete sysem including the Central Evaluator and final track clearance relay for each secton, Reset boxes, LV boxes, All track side units with detection point complete assembly & fixing arrangement for each detection point, clamps deflector for either side of each detection points, monitoring console for monitoring all the DPs at a time installed at a station/ RH/IBH etc. with all other accessories fully wired and fully equipped as per RDSO specification No.RDSO/ SPN/176/2013 (ver.3) or latest and manufacturers specification. The 1 equipment must also include the following : a) System must have remote monitoring and health diagnostics feature as per RDSO specification. b) Surge protection device. c) 20% spare slots for the both detection heads and track section in the evaluator for future and emergenc provision. Each set also consisting of a) Double rail contact of standard length of cable as per site requirement and mounting accessories - Equal to no. of DP. b) Deflectors to safeguard Rail Contact will be TWICE the no. of DPs. c) Protecting tube from DP to railhead as per requirement. d) Diagnostic PC as per specification and other accessories (as per Annexure-VI) e) Pre-wired cabinet/rack no. as per site requirement. f) 6 Nos. Electrostatic Discharge Wrist Band for cards/ modules protection. (Inspection by RDSO) " Unit Number = per Dp
200
370528
74105640
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements