Central Railway Tender
... More
Search from over 12139+ business opportunities that have been announced from the biggest Mahatenders, e tender Maharashtra, Maharashtra government tenders, and the Online Tender Notices posted on Maharashtra e tenders till date. Find opportunities that have come in from the multiple corporations, Maharashtra government departments, State PSUs, and Private companies from the state.
Central Railway - CR Tender
Electrical Goods and Equipments
Machinery and Tools
Electrical and Electronics
Ireps
Opening Date21 Feb 2025
Closing Date15 Mar 2025
Tender Amount₹ 9,10,93,133.56
Technical
Technical
Financial
Bid Capacity
... View More
91.093 crores. The formula used to calculate this is V/N or V, whichever is less, where V is the advertised value of the tender in crores of Rupees and N is the number of years prescribed for completion of work. In this case, V = 91.093 and N = 11/12, resulting in V/N = 99.31, making V (91.093) the minimum average annual contractual turnover required as it is less than V/N.
Technical Capacity
... View More
The required prior work experience for the bidder includes successfully completing or substantially completing similar works during the last 07 years. The similar works should have a value of at least 30% of the advertised value of the tender for three similar works, or 40% for two similar works, or 60% for one similar work. In case of composite works, the tenderer must have successfully completed or substantially completed works with a value of at least 30% of the advertised value of each component of the tender for three similar works, or 40% for two similar works, or 60% for one similar work. A component in a composite work can be considered as a separate component if its value is at least Rs. 2 crore.
Costs
EMD
₹ 6,05,500Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Signaling / Telecom Work Related To Utility Shifting In Connection With Provision Of Rob/rub In Lieu Of 09 (nine) Lc Gates In Between Manmad - Igatpuri Section And Trenching, Laying, Jointing, Splicing Testing And Commissioning Of Optical Fiber & 4/6 Quad Cable, Passenger Amenities In Connection With In Entire Section Of Borvihir - New Dhule - Nardana New Line Work In Bhusawal Division Of Central Railway
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
BSL-SnT-C-S-2024-25-04-DSTE-C-BSL-S AND T/CENTRAL RLYTender No
BSL-SnT-C-S-2024-25-04Tender Authority
Central Railway ViewPurchaser Address
-Website
http://ireps.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Remote terminal unit with 64 digital and 16 analog inputs for IBH/Relay huts.SPN No.Spec No:IRS:S-99/2006(Amdt-3) (Inspection by Consignee).
1
272717
321807.2
... More
Supply of Modular Terminal block of 2.5 sqmm 2IN 2 out type disconnect type terminal along with as per RDSO Specn.No.RDSO/SPN/189/2004 rev.3 The current capacity of 16 Amps & more,The terminal should have marking at centre to view description from front.Material to be procured from RDSO approved firm only. (Inspection by RITES). 6
200
117
27640.32
... More
Supply of End plates for modular terminal block (Inspection by Consignee) 7
50
23
1380.01
... More
Supply of End clamp for modular terminal block (Inspection by Consignee) 8
50
16
991.79
... More
Supply of DIN channel for the above terminals 1 Mtr each (Inspection by Consignee). 9
50
216
12787.07
... More
Supply of marker card as per customer spec(10x10) (Inspection by Consignee).
50
83
4944.79
... More
Design,fabrication and supply of fuse Auto changeover system for 32 Nos of external non detorating Type fuses of G type fuses from 0.6 A Amp to 4A Amp capacities used in signalling circuits.System shall have 8 cards with monitoring arrangement of 4 fuses in onee card.As per RDSO spec.RDSO/SPN/209/2012 Ver.2.0 or latest amendment if any.(Inspection by RDSO).
10
267602
315770.71
... More
Design,fabrication and supply of fuse Auto changeover system for 24 Nos of external non detorating Type fuses of G type fuses from 4 A Amp to 10 A Amp capacities used for point operation circuits.System shall have 6 cards with monitoring arrangement of 4 fuses in onee card.As per RDSO spec.RDSO/SPN/209/2012 Ver.2.0 or latest amendment if any. (Inspection by RDSO).
2
81026
95611.58
... More
Supply of PVC Flexible Copper Cable, Single core, multi strand 1x6 sq mm(84 conductor 12 each dia 0.30 + /- 0.01) as per specn IRS 694/2010 with latest amendment. If any with insulation thickness of 0.80 mm nominal conductor resistance 3.30 ohms /km and test parameters are as per (S)76/89 (Amdt .3).(Inspection by RITES).
1
91617
108108.43
... More
Supply of PVC Flexible Copper Cable, Single core, multi strand 1x10 sq mm(80 13 conductor each dia 0.40 + /- 0.01) as per specn IRS 694/2010 with latest amendment. If any with insulation thickness of 1.00 mm nominal conductor resistance 1.91 ohms /km and test parameters are as per (S)76/89 (Amdt .3).(Inspection by RITES )
1
141059
166449.97
... More
Supply of PVC Flexible Copper Cable, Single core, multi strand 1x25 sq mm(196 14 conductor each dia 0.40 + /- 0.01) as per specn IRS 2465/1984 & IS:694/2010 with latest amendment. If any with insulation thickness of 1.2 mm nominal conductor resistance 0.780 ohms /km and test parameters are as per (S)76/89 (Amdt .3).(Inspection by RITES )
1
326216
384935.43
... More
Supply of wire 16/0.2(blue,red,gray,yellow,brown,black,white as per site engineer instruction)finolex/polycab/delton make.IRS:S-76/89(Amd.3),BS:4808 Part-2.Wire to be procured from RDSO approved vendor (Inspection by Consignee).
11
6445
83658.31
... More
Supply of Transformers 230V/110V-130V Single Phase 2 KVA as per spec IRS S-72/88 (Amd.2)with latest amendments.(Inspection by RDSO)
3
10876
38503.66
... More
Supply of Battery Charger self regulating floor mounting type with 230 V AC single phase input and output 24V DC, 10A as per spec. IRS.S.86/2000 with latest amendments. (Inspection by RDSO).
3
40356
142862.05
... More
Supply of Battery Charger self regulating floor mounting type with 230 V AC single phase input and output 110 V DC, 40A to spec. IRS.S.86/2000 with latest amendments (Inspection by RDSO).
1
93822
110710.18
... More
Supply of Program switches, snap action, base mounting type along with cover and mounting bracket 63-A-7 Pole 3 Position Siemens type (3 (LAO-63/7Y). (Inspection by Consignee).
2
9226
21775.22
... More
Supply of Program switches with acrylic cover, snap action, base mounting type along with cover and mounting bracket 25A-7 pole 3 position Siemens type (3 LAO-25/7Y). (Inspection by Consignee). 21 2.00 Numbers 1857.70 3715.40 18.00 4384.17 21
3
7415
26252.32
... More
Supply of Electronic Solid state flasher Unit for Road traffic signal 24V DC. ACES/ Muconny make with operating voltage 110V AC (Inspection by Consignee). 22
-
-
21
... More
Rubber Mat for Power Equipment Room (10 mm thick) (Inspection by Consignee).
50
129
7642.27
... More
Supply of Microprocessor based universal earth resistance sensing unit 12 channel AC/DC. as per RDSO/SPN/256/2002 with latest amendments. (Inspection by RDSO).
1
145626
171839.33
... More
Supply of Time Element Relay (Clock work type) AG timer Siemens Make (No RSSK 30/0052)or equivalent (Inspection by Consignee).
2
7793
18392.94
... More
Supply of Key Lock Relay with different ward combinations (three extra set of ward plate for Point Machine to be supplied with each relay). Siemens Make working on 60V DC/24 DC or functional equivalent without base plates. RDSO/SPN/219/2016 Version 1.0 d 1. (Inspection by RDSO)
2
9145
21584.39
... More
"Supply of Universal LED Lamp proving relay QECX61 relay, 4F-4B,AC conforming to BRS:941A STS/E/RELAYS/AC LIT LED SIGNAL/09-2002 ,Amdt.-1 (FOR ALL ASPECT ECR FOR AC LED SIGNAL) (Inspection by RDSO). "
26
3724
114253.55
... More
Supply of QSPA1relay, 24VDC,Slow to pick up, 8F.4B along with plug board, retaining clip and connectors conforming to BRS:933A,IRS:S60,IRS:S34 & IRS:S23 (Inspection by RDSO).
4
4414
20838.47
... More
Supply of QNA1 AC immunised relay, 8F-8B,24VDC along with plug board,retaining clip and connectors conforming to BRS: 931A, IRS:S60, IRS:S34 & IRS:S23 (Inspection by RDSO).
25
3852
113644.32
... More
Supply of QNN1 twin nutral line relays 24V DC 4F/4B , 5F/3B, 6F/2B contacts complete with plug board retaining clip and connector BRS 960 A (AS applicable) (Inspection by RDSO).
25
6483
191249.39
... More
"Supply of Indication cum operating panel as per RDSO spcn no: RDSO/SPN/186/2004 Rev. 2.0 with tag block completely wired with full complements like operating, emergency push buttons, with sealing arrangement, pulse counters Non Resettable type, various buzzers(24V DC), SM's key and housed in a sheet metal cabinet similar to Siemens make in quality and finish. Each of 30 the working domino should have all 15 terminals components. Different tone 3nos. buzzers and 6 non resettable counters are also wired as specified by Engineer incharge.The panel should have polycarbonated sheet cover on the top. SPARE:10% of working domino with cover plate completely wired and 10% of LEDs of each colour,10% (minimum three) of buttons, 10% of counter, 2 magnets, 1 buzzer & 4 bulb extractors shall be handed over as spare after commissioning of the installation by the contractor. Tag block shall conform to RDSO specn. IRS-S- /2006. Manufaturer's name plate with address to be provided. (Inspection by Consignee). (Unit Numbers = Plates) "
75
508
44970.39
... More
Supply of Desk type Electronic Magneto Telephone as per RDSO spec No IRS TC 79/00 or latest ammendment (Inspection by Consignee).
4
3283
15495.9
... More
"Resin cored wire as per specification No. IS:1921-1975 with Alloying element percentage as 63% SN (Tin) and / 37% Pb (Lead) with percentage of various impurities not exceeding 32 the values Sb (Antimony) 0.2% maximum , Cu (Copper) 0.1% maximum, As (Arsenic) 0.05% maximum, Fe (Iron) 0.02% maximum & other impurities mainly Al, Zn & Cd shall be limited. The flux shall be free from corrosive action as per clause 5.2 & flux percentage may be used as per requirement.(Inspection by Consignee). " 33
1
1252
1478.04
... More
Lacing thread rolls, black, wax coated (100 mtrs). (Inspection by Consignee).
50
66
3902.85
... More
Supply of Test Board & Circuit progress board for relay room as per Drg No RST/C/105 A&B(Inspection by Consignee).
1
12559
14820.68
... More
Supply of round head type non detoriating type low voltage cartridge fuse as per Specn No IRS/S/78/92 with latest amendmends 2/4 A capacity (Inspection by Consignee).
50
70
4137.67
... More
Supply of round head type non detoriating type low voltage cartridge fuse as per Specn No IRS/S/78/92 with latest amendmends 6 A capacity (Inspection by Consignee). 37 1.00 Numbers 3396.99 3396.99 18.00 4008.45 37
10
70
827.53
... More
Suppy,Installation,Testing & Commissioning of Analogue Addressable Multisensor Detector complying to RDSO/SPN/217/2019 Ver 3 or latest As per latest VDS approved/listed. (Inspection by RDSO).
-
-
37
... More
Suppy,Installation,Testing & Commissioning of Manual call points,complying to RDSO/SPN/217/2019 Ver 3 or latest As per latest VDS approved/listed. (Inspection by RDSO)
10
5226
61673.76
... More
Suppy,Installation,Testing & Commissioning of Resettable,Analogue Type Linear Hest Sensing(LHS) Cable complying to RDSO/SPN/217/2019 Ver 3 or latest As per latest UL or FM or VDS or LPCB approved/listed. (Inspection by RDSO)
25
1414
41716.83
... More
Suppy,Installation,Testing & Commissioning of (LHS) Interface Module with all accessories for single stretch complying to RDSO/SPN/217/2019 Ver 3 or latest As per latest UL or FM or VDS or LPCB approved/listed. (Inspection by RDSO)
15
134184
2375059.28
... More
Suppy,Installation,Testing & Commissioning of Aspiration (Air Sampling Type) Detection Unit complying to RDSO/SPN/217/2019 Ver 3 or latest As per latest UL or FM or VDS or LPCB approved/listed. (Inspection by RDSO)
15
278360
4926978.55
... More
Suppy,Installation,Testing & Commissioning of CPVC pipe for Aspiration Detection system complying to RDSO/SPN/217/2019 Ver 3 or latest shall be approved/listed by UL or FM or VDS or LPCB or tested withappropriate equivqlant standard. (Inspection by Consignee)
10
1614
19053.58
... More
Suppy,Installation,Testing & Commissioning of Analogue Addressable loop powered Monitor Module with inbuilt isolator complying to RDSO/SPN/217/2019 Ver 3 or latest (Inspection by RDSO)
10
8745
103201.74
... More
Suppy,Installation,Testing & Commissioning of Analogue Addressable loop powered Control Module complying to RDSO/SPN/217/2019 Ver 3 or latest (Inspection by RDSO)
10
8745
103201.74
... More
Suppy,Installation,Testing & Commissioning of Hooter cum Strobe complying to RDSO/SPN/217/2019 Ver 3 or latest (Inspection by RDSO)
10
7748
91430.41
... More
Suppy,Installation,Testing & Commissioning of 2C 1.5sq mmtwisted shielded armoured copper cable (Per Meter) with accessories complying to RDSO/SPN/217/2019 Ver 3 or latest (Inspection by RDSO)
10
113
1338
... More
Suppy,Installation,Testing & Commissioning of Isolator Device to isolate the circuit in case of short circuit, complying to RDSO/SPN/217/2019 Ver 3 or latest (Inspection by RDSO)
10
3721
43912.4
... More
Suppy,Installation,Testing & Commissioning of Auto Telephone Dialler(GSM) to send the pre-recorded message to multiple mobile number,programmed earlier complying to RDSO/SPN/217/2019 Ver 3 or latest (Inspection by RDSO)
10
9303
109781.18
... More
Supply of 4.5 Kg CO2 type fire extinguisher alog with all accessaries, extinguisher testing certificate has to be supplied along with - Supply of ISI marked Carbon di Oxide type (BC) fire 49 extinguisher of 4.5 Kg capacity confirming to IS 2878:2004 from seamless cylinder, with IS marked control value, high pressure mtr., Long discharge hose and horn complete with initial gas charged with carrying handle and wall mounting braket etc., as required by Site Engineer. (Inspection by Consignee)
5
5019
29612.87
... More
"Operating tool (operating tool, screw driver & stripper) as per Annexure, (Inspection by Consignee)"
1
8660
10219.04
... More
Tool bag complete with Megger as per Annexure. ADD AC /DC clamp meter , with Hand Held Tool Bag. (Inspection by Consignee)
1
52213
61611.89
... More
Supply of Main Signal Post 140 mm outer dia 3.6 Mtr Length as per spec No IRS S 6/81 with latest amendments.. (Inspection by RITES)
17
6832
137054.33
... More
Supply of Main Signal Post 140 mm outer dia 4.6 Mtr Length as per spec No IRS S 6/81 with latest amendments (Inspection by RITES)
9
6948
73793.07
... More
Supply of Main Signal Post 140 mm outer dia 5.6 Mtr Length as per spec No IRS S 6/81 with latest amendments. (Inspection by RITES)
2
9233
21790.82
... More
Supply of Cast Iron Main signal 140 mm surface base as per spec No IRS S-10 and Drg 55 No 2011/M with latest amendments, with CLS ladder assembly complete for CLS signal 5.5/4.5/3.5 mtrs long as per RDSO drg.No SA-23156(Adv),SA 23153(Adv) & SA 23150 (Adv) Alt. 1 respectively with latest amdt. as the case may be & signal front staging complete assembly for CLS unit & signal back staging as per extant C.Rly practice . (Inspection by RITES) 56
28
9034
298487.32
... More
Supply of Signal No.plates. as per Drg No RST-11393/SK 842 (Inspection by Consignee)
28
521
17236.64
... More
Supply of A/AG/C/P/G/IB Board as per Drg RST-11444/1(A), RDSO Drg No SA 23460(AG), SA 23461( c ) , RST-11445 , SA 23476(P), SA 23477(G) & SA 234476-77(IB) as applicable respectively with latest amdt.. (Inspection by Consignee)
28
561
18559.89
... More
Supply of different warning Boards as per Goods warning board(SK-784) RDSO Drg No. SA 2380 (Adv),SA 2370/M-,Block section limit board RDSO Drg No SA 2373- Paint and retroreflective arrangement as per railway drawing.. (Inspection by Consignee)
3
3252
11512.33
... More
Supply of Hand Cuff Locks / Godrej Navtal Locks with common key. (Inspection by Consignee)
90
286
30394.44
... More
Supply of 2 aspect signal unit in FRP body without lenses and transformers as per 60 RDSO Specification RDSO/SPN/194/2006/Rev 2.0 or latest complete to suit LED signals lamps and suitable for 140 mm dia post saves pigment finish on the back side of the and inside . White pigment finish inside the 2 aspect unit to avoid any extra paint cost. (Inspection by RITES)
17
30939
620644.56
... More
Supply of 3 aspect signal unit in FRP body without lenses and transformers as per 61 RDSO Specification RDSO/SPN/194/2006/Rev 2.0 or latest complete to suit LED signals lamps and suitable for 140 mm dia post saves pigment finish on the back side of the and inside . White pigment finish inside the 4 aspect unit to avoid any extra paint cost. (Inspection by RITES)
11
31708
411582.69
... More
Supply of Phenolic 10mm thick sheet, grade P3 in standard size of 1.22X1.22 Mtr as per spec. No IS 2036 of 1995. (Inspection by RITES)
70
5250
433689.65
... More
Supply of cartridge fuse block made of PBT as per RDSO Drg No SA-23748 Alt 4,SA- 23749 & Spec No IRS S 75/2006 with latest amendment. Fuse block shall be suitable for round head type voltage fuses. (Inspection by Consignee)
210
162
40376.53
... More
Supply of ARA Terminal blocks with links made of PBT Specn No.IRS/75/2006(Rev - 2) with latest amendments and RDSO Drg.No.SA-23741 Alt.4., SA-23745 Alt 5, SA-23746, SA-23748 Alt - 4 & SA-23756 Alt-3. (Inspection by RITES) 65
1400
72
119951.72
... More
Supply of Three pole plug & socket 5 A ( ISI make ). (Inspection by Consignee)
70
230
19069.04
... More
Supply of Apparatus Case with godown locks with deatachable handle on both the doors. Single case as per Drg No SK 783-1/2 with latest alteration. (Inspection by RITES)
30
16020
567109.77
... More
Supply of Apparatus Case with godown locks with deatachable handle on both the doors. Half Case as per Drg No SK 783-1/2 with latest alteration. (Inspection by RITES)
18
12853
273017.69
... More
Supply of Lamp Holders, two pin, Bakelite type for apparatus case (Inspection by Consignee)
140
30
5023.73
... More
Supply of Electrically Operated LIFTING BARRIER complete set without Hand Generator, Operating on 110V AC, with Boom length 9.76M along with one spare boom confirming to RDSO/SPN/208/2012 Ver.2.0 with amendment 1 or latest amendment.. (Inspection by RDSO)
1
307115
362396.54
... More
Supply of Sliding Boom complete as per Central Railway practice Drg. No-SK-860. (Inspection by RDSO)
1
222832
262942.89
... More
Supply of GI pipe, inner dia. 100mm dia. B-class as per spec. No.IS 1239 PT. 1/2004 or latest with sockets and fittings. TATA/JINDAL/ZENITH BIRLA Make. (Inspection by RITES)
504
1029
612157.19
... More
Supply of DWC HDPE Pipe with one snap fit coupler and 'O' ring fire resistant, anti rodent,in 6mtr length of size 120 mm outer dia as per RDSO /SPN /204/2011/Ver 1.1 with Amdt 1 or latest. (Inspection by RITES)
840
321
318601.42
... More
Supply of earth electrode assembly as per Drg.No.CR/S&T/SK/815 (Inspection by RDSO)
33
1078
41980.44
... More
Supply of RCC pipe half round of size 300mm dia outer and 250 mm dia internal 1 mtr long. matching to IS No.458/2003 amendment-1 with Rev.4. (Inspection by Consignee)
3500
422
1743892.5
... More
CABLE ROUTE TRACER for tracing existing cable route and depth make:Stanley/MEGGER/Rycom (Inspection by Consignee)
7
154000
1272040
... More
Maintenance Free Earth As per RDSO/SPN/197/2008 or latest consisting of :1) Copper 76 bond steel electrod 3 Mtr long 17 mm dia with copper bonding thickness of min.250 micron & UL listed & marked -01 No 2) Earth enhancement compound RDSO Approved in sealed bag of 10Kgs-03 No 3) Copper strip 150x25x6 mm -02 No 4) Copper strip 300x25x6 mm -01 mm 5)35 Sqmm Copper Cable to connect earth electrod to MEEB-15 Mtr Approx. (Inspection by RDSO)
2
17786
41975.74
... More
Supply of cable route marker FRP type as per C.Rly.drg.no.RST/C/203-RDSO /SPN/151/1997 (Inspection by Consignee)
700
202
167595.4
... More
Supply of RCC Trunking with capping.Size 250mmx200mm.Drg.No.RST/C/291/A (Inspection by RITES)
9450
873
9742851.72
... More
"Fixing of Q series relay base plate/metal to metal relay mini group and major group base plate, laying, bunching, lacing, dressing & packeting of 60/40 core PVC indoor cable/flexible wire 1 and termination of 60/40 core cable/flexible wire on tagblock/base plate & base plates & soldering. This includes fuse wiring, bus bar looping etc. required for keeping installation ready for circuit wiring work & panel throughing work. The work shall be done as per approved plan, extant practice on C.Rly. & the instruction of Rly. Engineer at site.(Unit Number = TAG BLOCK ) "
10
626
7387.86
... More
"Circuit wiring/jumpering as per circuit diagrams in the relay racks/IDF rack tagblocks.This includes preparation of Jumper sheets by wire man duly checked by firm's site 2 supervisor & wire to wire testing as per circuit diagram. Any wrong jumper done by wireman will not be paid & correction shall be done free of cost. Jumper wires will be issued by Railways. Good quality solder rosin core to be supplied by contractor for soldering of Jumper wires. Soldering of jumper wires (Unit Number = PER JUMPER) "
100
12
1436.06
... More
"Functional testing of PI/RRI/IBS/Autosignal etc. as per Selection table, control table , 3 sqare sheet etc. Contractor shall depute one Engineer, one Supervisor & wiremen technically qualified to carryout functional testing as per approved design. Technical knowledge of contractor's staff will be judged by Railways Engineer incharge before permitting them to do the testing. "
12
342
4852.49
... More
Wiring,Fixing & commissionig of modular of fuse 0.6 to 4 Amp rating alarm system having change over arrangement and potential free contact witing at Datalogger IDF Etc as per instruction of Railway Engineer (Module of 32 nos fuses) 5 2.00 Module Each645.83 1291.66 18.00 1524.16
4
2587
3053.23
... More
Wiring,Fixing & commissionig of modular of fuse 4 to 10 Amp rating alarm system having change over arrangement and potential free contact witing at Datalogger IDF Etc as per instruction of Railway Engineer (Module of 24 nos fuses)
-
-
5
... More
Preparation of cable route plan, cable coreage plan, location particulars, Cable termination rack particulars, cable meggering repost, earth resistance particulars, Traction bonding diagram, 1/2 wire count sheet and any other drawing in Autocad in A3/A4 size .The contractor shall initially supply 3 sets of circuits complete for approval of Railways. Railways will return one set to the 6 contractor duly approved withalrerations/corrections if any. The contractor shall incorporate Railways atrerations/corrections in the tracings without any deviation and submit all tracings complete in all respects to the Railways. This includs submission of final cable route plan as per laid cable duly measured at every 30 m clearly indication distance of laid cable from fixed point of reference & indicating all trak crossings and tail cables. This also include designing of cable coreage plan based upon I.P. in consultation with engineer -in- charge. For small/ medium yards
1
24049
28378.83
... More
Design and supply of Detailed Signalling Circuits including Panel diagram(if required) , Route section Plan , Selection Table , Fuse & Negative Tag. Analysis ,Contact analysis , Relay Rack Arrangement and wirecount sheets etc. in A3 size.Completion circuit shall be plotted in AutoCAD. The contractor shall initially supply 2 sets of circuits duly signed by the circuit designer having substantial experience on design side for making such circuits, complete for approval of Railways. Railways will 7 return one set of circuit to the contractor\ duly approved with alterations /corrections, if any. The contractor shall incorporate Railway's alterations/corrections in the original tracings & CD without any deviation and submit two copies of the modified circuits. Original tracings so modified & final CD complete in all respects alongwith 6 sets of final approved circuits (out of which one set shall be supplied in transparent bags. Only two sheets of circuits shall be placed in one bag each) shall be submitted to the Railways in case there are no further alteration suggested by Railways. This also includes modifcation in yard. for IBS/ABS/LC Gate
1
48176
56848.45
... More
Excavation of cable trench as per cable route plan,1.0 mt. deep and 300mm wide along side the track in normal soil/strata, conforming to distances as per cable route plan and refilling after cable laying. This work includes covering of cable laid in trench by loose soil for a layer of 50mm 8 thickness after clearing of route,bushes etc.It shall be ensured that top of the cables laid is at a depth of 0.8 m or more If it is less,then the width and depth shall be suitably increased and accordingly proportuonate payment shall be made .In case depth of trench is not achievable due to site conditions,Proportionate payment will be made as per procedure.The work shall be done as per the extant practice on Central Railway and instructions of Railway Engineer at site.Drg No.SK 805
7000
350
2891000
... More
Excavation of cable trench as per cable route plan,1.0 mt. deep and 300mm wide along side the track in hard soil, conforming to distances as per cable route plan and refilling after cable laying. This work includes covering of cable laid in trench by loose soil for a layer of 50mm 9 thickness after clearing of route,bushes etc.It shall be ensured that top of the cables laid is at a depth of 0.8 m or more If it is less,then the width and depth shall be suitably increased and accordingly proportuonate payment shall be made .In case depth of trench is not achievable due to site conditions,Proportionate payment will be made as per procedure.The work shall be done as per the extant practice on Central Railway and instructions of Railway Engineer at site.Drg No.SK 805
700
583
481830.58
... More
Digging of trench 1.0M deep from rail flange/road level (for LC) and 0.3 mtrs to 0.6 10 Mtrs wide and back filling after placing of DWC/RCC/GI pipe (Placing of DWC/RCC/GI pipe coverd separately) The ballast disturted be screened and dressed as required by Engineerin-charge or his representatives and road tarred immediately.Drg No.SK 806
420
583
289098.35
... More
Cutting of all types of Roads/ platforms (except concrete type ) for trenching and 11 excavation to depth of 300mmx300mm wide approx. and refilling after laying of RCC/GI/DWC pipe & to restore them to original condition. The work shall be done as per extant practice on C.Rly & instructions of Rly engineer at site.SK-807
84
2916
289100.33
... More
Laying of DWC/RCC pipes alongwith ollars/RCCHalf round pipe in trenches at places of track and road crossings, platform cuttings etc.
840
56
56349.72
... More
Fixing of the GI Pipes for crossing of Culverts, bridges etc and concreting of ends with brick masonry at both ends as per the instructions of Railway Engineers at site.
504
69
41612.56
... More
Laying of signalling/Power/Tele cable of various cores/sizes in trenches and through pipes. 15 700.00 Numbers 12.53 8771.00 18.00 10349.78
280
5197
1717227.57
... More
Placing and securing of cable route markers in trenches at the specified interval and at diversions, joints etc along the cable route. The work shall be done as per extant practice on C Railways & the instruction of Rly engineer at site.
-
-
15
... More
Jointing of 4 / 6 quad cable with Heat Shrinkable straight through Jointing Kit for 4 / 6 quad cable.
14
3562
58847.38
... More
Whereever depth of 0.5 m cable trench is not feasible cable shall be protected as under :- Preparation of cement mixture 1:3:6 with contractor's own materials and spreading cement concrete mixture layer of 100 mm thick over the already laid cables in the excavated trench.
35
5329
220110.42
... More
Excavation and Casting of Apparatus Case foundation with contractors Anchor bolts, cement, ballast and other materials. The required Scaffolding Ferma etc for Casting of foundation will have to be brought by the contractor at his own cost Single Case as per Drg No SK 803
30
9887
350000.51
... More
Excavation and Casting of Apparatus Case foundation with contractors Anchor bolts, cement, ballast and other materials.The required Scaffolding Ferma etc for Casting of foundation will have to be brought by the contractor at his own cost Half Case as per Drg No SK 804
18
9693
205899.07
... More
Erection of Apparatus Cases. This includes filling of location foundations and plastering Single Case
30
1098
38870.62
... More
Erection of Apparatus Cases. This includes filling of location foundations and plastering Half Case
18
842
17892.58
... More
Fabrication and fixing of phenolic laminated sheet in location box by providing all 22 fixtures as per Railway Drawing including fixing of PVC coated string rods at the back side for cable support with contractor's own materials. The work shall be done as per drg. and arrangement similar to SK 783-1/2.with latest alterations and as per the instruction of Rly engineer at site. SINGLE CASE
30
2251
79711.24
... More
Fabrication and fixing of phenolic laminated sheet in location box by providing all 23 fixtures as per Railway Drawing including fixing of PVC coated string rods at the back side for cable support with contractor's own materials. The work shall be done as per drg. and arrangement similar to SK 783-1/2.with latest alterations and as per the instruction of Rly engineer at site. HALF CASE
18
1984
42156.73
... More
Fixing of ARA/WAGO Terminal and fuse blocks on phenolic laminated sheets and fixing by stainless steel/brass nuts & bolts. This includes provision of two additional holes on the board on either side for cable conductor entry.
1610
22620
26692.19
... More
Termination of cable cores on ARA terminal/ fuse blocks,in the apparatus Cases/ cable termination rack.This includes all associated works of pulling out the cable from underground. The work shall be done as per location plans and instructions of Rly engineer at site.
2100
22218
26217.24
... More
Installation of Eqpt. (Relays, resistance, chargers batteries etc.) & wiring of the same in apparatus cases as per location diagrams&circuit diagrams. as per Instruction of site incharge and practice - Single case
30
1497
53019.29
... More
Installation of Eqpt. (Relays, resistance, chargers batteries etc.) & wiring of the same in apparatus cases as per location diagrams&circuit diagrams. as per Instruction of site incharge and practice - Half case
18
1017
21617.65
... More
Fixing of cutting in relay bases & wiring of relays with Contractors own materialobtained from approved sources in location box as per the instuctions of Engineer in charge.
18
566
12026.94
... More
Excavation and Casting of main signal foundation as per Drg No SK 801 with 29 contractor's own materials including cement and anchor bolts of standard size. The required scaffolding Ferma etc for Casting of foundation will have to be brought by the contractor at his own cost. 30 18.00 Numbers 3490.22 62823.96 18.00 74132.27
18
9149
194331.98
... More
Erection of CLS Post with Surface base and signal unit on top or on OFF set Bracket, fixing of front and back staging, ladder and guards, signal name plates/boards if any with contractors own brackets and fixing materials. This also includes erection of auxiliary signals like calling on, shunt signal if any. The work shall be doen as per instructions of Rly. engineer at site.
-
-
30
... More
Termination of tail cable on Main signal units and wiring with contractor own material, fixing of lenses etc. The ork shall be done as per instruction of Rly engineer at site.
18
1096
23284.77
... More
Fixing of Stop Board, Block section limit Board, goods warning board with contractors own material. The work shall be done as per instruction of Rly engineer at site.
2
553
1305.74
... More
Supply and Fixing of Protective Screens of expanded metal 12 SWG of size 1200 SWG of size 1200 x 1500 mm on signals as per standard practice.
1
4319
5096.86
... More
"Installation of ON/OFF aspect LED's in signal including termination of tail cable on signal , wiring fixing of LED units and testing. The work shall be done as per instruction of Railway engineer at site. "
80
545
51508.42
... More
Releasing of Existing Panel, Power Equipments,relays and relay racks, CT racks, 35 Batteries, Block Instts., Ground frame/s, Location Boxes, TLJBs, Signal Posts, Signal Units, Equipment inside the location boxes, Lifting Barrier , rodding runs,etc as applicable including the breaking of foundation etc. as per the instructions of Rly Engineer at site & their transportation to nominated depot.
1
40945
48315.54
... More
Laying of RCC Trunking and capping and sealing after cable laying as per std practice on C.Rly & the instruction of site engineer.
9450
70
789379.29
... More
"Patching work in old location box consisting 1) Digging of pit , cleaning of earth from 37 all sides ,breaking of seal of location boxes removal of sand from location , marking of new cable holes 2) insertion cable from ground 3)making place for cable termination in old location ,shifting ARA , fuse etc after removal and termination including fixing of ARA. 4)Termination of cable in old location. 5) Filling of sand and plastering to all sides upto 50 mm below ground level."
5
6279
37051.47
... More
Installation of unit earth as per RDSO/SPN/ 197/VER 1 or latest to construct earthing of less than 1 ohm consisting of digging earth to required depth, insertion of electrode/ filling of earth 38 enhansing compound and construction of chamber, measurment of earth value and all other works of earthing as per code of practice. All the consumables for mounting the Copper tape inside the Relay room. Exothermic weld materials and tools and fixtures for the welding copper tapes and electodes etc shall be arranged by the contractor.
18
5290
112366.82
... More
Shifting of existing Full Location Boxes coming in the alignment of doubling. The work includes losing & removal of soil around location boxes by excavating soil around foundation, making of pit for shifting of location box horizontally opposite to railway track up to 0.5 to 1.0 mtr. This 39 includes loosing of existing cable coils without any damage. The excavated soil shall be back filled after shifting of Locaion Boxes. Location box along with its foundation shall be shifted by push method with the help of jacks or by crane by contractors own expenditure under instructions of engineer in- charge at site. Any minor repairs in foundation due to patching shall also be carried out by contractor as per instruction of Engineer incharge.The work may affect train working hence the work shall be done as per margin only or during traffic block only.
10
5447
64282.51
... More
Shifting of existing Half Location Boxes coming in the alignment of doubling. The work includes losing & removal of soil around location boxes by excavating soil around foundation, making of pit for shifting of location box horizontally opposite to railway track up to 0.5 to 1.0 mtr. This 40 includes loosing of existing cable coils without any damage. The excavated soil shall be back filled after shifting of Locaion Boxes. Location box along with its foundation shall be shifted by push method with the help of jacks or by crane by contractors own expenditure under instructions of engineer in- charge at site. Any minor repairs in foundation due to patching shall also be carried out by contractor as per instruction of Engineer incharge. The work may affect train working hence the work shall be done as per margin only or during traffic block only.
10
4387
51772.85
... More
Transferring of signalling/Telecom cables from existing Location box to New location box. The work include breaking/dismantling of existing foundation of locations, excavating and 41 removing /segregating coils of this cables which may be of about 10 mtr in length .These cables are then to be disconnected and removed from the existing locations one by one as per the instructions and under the supervision of railway staff present at site. The cable is then to be inserted and terminated in new location box. The item includes neatly dressing of cables marking wiring tree etc. The material required for dressing /lacing will be arranged by contractor at its won cost. The work is required to be done systematically and with due precaution during the night block of 2.00-2.30 hrs each or within the time that may be allowed. The excavation work to be done carefully without damaging the cables to avoid undue failures. (Termination charges will be given separately) Note: Proportionate payment will be made if cable is of other length. 2/6/12/19/24/30 core signalling cable/4 or 6 Quad/PIJF/Any Signalling/Telecom Cable(One no. unit= One cable of 10 m length)
145
472
80776.31
... More
"Location strenthening of full case with wiremesh and concrete mixture as per drawing of full location "
14
7522
124264.76
... More
"Location strenthening of Half case with wiremesh and concrete mixture as per drawing of Half location "
14
7221
119294.06
... More
Supply, checking of installation, commissioning and testing of SMPS based integrated power supply conforming to RDSO Specification RDSO/SPN/165/2012 Version 3.0 with latest 1 amendments for LC gate as per Central Rly.Drg.no.SK-791/C with latest corrections if any, attached as Annexure-2. Scope of Supply, Installation and Commissioning of IPS shall be as per RDSO guidelines & letter No.STS/E/IPS/Genl. Dated 03/04/2008 or latest if any attached as Annexure-B (Inspection by RDSO)
1
1012566
1012566.6
... More
Removal of wire circuit as per Jumper Sheet in RRI Relay Room on IDF Tag Block. This 2 includes indentification of terminal numbers, de-soldering at both ends and complete removal of wire. (If two jumpers are wired on One Terminal then identification of proper jumper and re-soldering of other jumper.) (Unit Number = PER JUMPER)
300
9
2844
... More
Alteration in indication panel. This will includes removal of existing Domino during NI 3 and replacing New Domino / addition of New domino as per requirement. (These Dominos shall be kept ready duly wire between tag block and Domino for fixing them during NI at proper place). This includes laying of cable from relay room to indication panel fixing of tag block termination, soldering and lasing of cable on tag block with contractors soldering materials and lacing thread. 4
20
473
9473.2
... More
Steel Cupboard (plain storwel) size 6' X 3' Godrej Make (Inspection by Consignee) 5
1
13127
13127.95
... More
Supply of Panel operator Chair model PCH - 7001 (Godrej) (Inspection by Consignee)
1
12518
12518.76
... More
Supply of Panel operator record Table. Model T102 (Godrej) or equivalent. (Inspection by Consignee) 7
1
14757
14757.48
... More
Supply of Chair model PCH - 7003 (Godrej) (Inspection by Consignee)
1
8977
8977.97
... More
Supply of 2 W Push Button Telephones with tone/puse/mix mode dailing & compitable for connecting the way side telephone with way side equipment matching with above specifications. (Inspection by Consignee)
-
-
1
... More
Supply and Installation of GPS Based Synchronous Double Sided Digital Clock as per RDSO /SPN /TC /62 /2008 Rev. 3.0, with White LED and all required fixing arrangements. (Inspection by Consignee).
10
38463
384634.1
... More
Maintenance Free Earth As per RDSO/SPN/197/2008 or latest consisting of :1) Copper 3 bond steel electrod 3 Mtr long 17 mm dia with copper bonding thickness of min.250 micron & UL listed & marked -01 No 2) Earth enhancement compound RDSO Approved in sealed bag of 10Kgs-03 No 3) Copper strip 150x25x6 mm -02 No 4) Copper strip 300x25x6 mm -01 mm 5)35 Sqmm Copper Cable to connect earth electrode to MEEB-15 Mtr Approx. (Inspection by RDSO)
25
20987
524696.75
... More
Installation of unit earth as per RDSO/SPN/197/ver I or latest, to construct earthing of
25
6242
156065
... More
Supply of earth electrode assembly as per Drg.No.CR/S&T/SK/815 (Inspection by Consignee)
10
1272
12721.3
... More
Installation of earth electrode assenbly as per Drg.No.RE/S&T/S IG/Tender/SK726/85 including earth wire connected through GI wire 8 SWG supported on M.S. flat of size 6mm x 40 mm to earth electrode as per drg. No.CR/S&T/SK-815 for sigg. Equipment such as lever frames, apparatus 6 case, signals, relay racks,block insruments, and etc. as per RE manual. The earth value should be less than 10 Ohms including the lead wire. The value should be measured in presence of Rly. supervisor. It should be documented and painted on earth enclosure made of concrete.( only earth electrode will be supplied by Railway). All other material required for provision of earthing will be brought by the contractor.
10
2983
29832.1
... More
Supply of Telecommination maintenance tools kit one set as per Annexure (Inspection by Consignee)
2
13909
27818
... More
Supply of Trans-receiver handheld 5 Watt Analog VHF Set along with two sets OEM 8 approved rechargeable battery including one as apare,quick Battery Charger,Helical Antenna and Belt Clip Conforming to RDSO Specn.no.RDSO /SPN/TC/107/2018 Rev.0.0 with and No.1 or later. (Inspection by RITES)
40
15909
636360
... More
Supply of VHF 25W transreceiver (synthesised) set complete consisting of Aanalog set as per CR specification.(Inspection by RITES)
5
28084
140423.5
... More
Installation testing & commissioning of the 25 W VHF system including the erection of mast, antenna,chargring of the battery with all contractor's materials.
5
10179
50895.75
... More
Supply of 2 wire DTMF Type HQ Control Room Eqpt conforming to RDSO specification . TC/66/2007-Amendment-I with latest amendments this include supply of end patching Equipments for all control sections (Inspection by Consignee)
2
147892
295784.02
... More
Supply of cable termination Panel as per Drg no- SK/CSTE(C)\97\26, fitted with 12 No of 32 way U link feed Panel along with U links complete and mounting arrangement for isolation transformers. (Inspection by Consignee)
7
29870
209091.75
... More
"Installation of cable termiaation paael as per Drg no- SK/CSTE(C)\97\26, mounting of Isolation transformer, termination of U/G cable on U Link panel, supply of wiring material and wiring of circuitry as instruction of engineer in charg"
7
6177
43242.99
... More
Supply of Thermo Shrink jointing kit (RSTF-4) for jointing underground quad cable (0.9mm conductor dia) Quad cable as per RDSO Spec. No. IRTC 77/2012 (Rev.3.0) Amdt.3 or latest. Firm's Offer Make-Trendbull. (Inspection by RDSO)
75
3180
238500
... More
Making of thermoshrink straight through/derivation/ transformer /PIJF cable joint for underground jelly filled cable 6 quad/4 quad/20 pair 10 pair etc. PIF cable as per the instruction of Rly engineer at site.
75
1789
134233.5
... More
Excavation for cable trenches in normal soil, depth up to 1.2 Mtr and width 0.3 Mtr 16 including dressing of sides lift upto1.5 m, including getting out the excavated soil and after laying of cable/ duct / pipe etc, ordinary back filling (no ramming & watering required the trench with or without protection with the excavated soil and dressing the left over soil in a heap over the trench. The work shall be done as per proportionate payment will be made.
55
95071
5228950.1
... More
Digging of trench 1.0M deep from rail flange/road level (for LC) and 0.3 mtrs to 0.6 17 Mtrs wide and back filling after placing of DWC/RCC/GI pipe (Placing of DWC/RCC/GI pipe coverd separately) The ballast disturted be screened and dressed as required by Engineerin-charge or his representatives and road tarred immediately.Drg No.SK 806
500
688
344165
... More
Excavation of cable trench as per cable route plan,1.0 mt. deep and 300mm wide along side the track in hard soil, conforming to distances as per cable route plan and refilling after cable laying. This work includes covering of cable laid in trench by loose soil for a layer of 50mm 18 thickness after clearing of route,bushes etc.It shall be ensured that top of the cables laid is at a depth of 0.8 m or more If it is less,then the width and depth shall be suitably increased and accordingly proportuonate payment shall be made .In case depth of trench is not achievable due to site conditions,Proportionate payment will be made as per procedure.The work shall be done as per the extant practice on Central Railway and instructions of Railway Engineer at site.Drg No.SK 805
500
688
344165
... More
Whereever depth of 0.5 m cable trench is not feasible cable shall be protected as under :- Preparation of cement mixture 1:3:6 with contractor's own materials and spreading cement concrete mixture layer of 100 mm thick over the already laid cables in the excavated trench.
250
6288
1572217.5
... More
Excavation of cable trench 300 mm wide at the bottom and 1.2 metre deep across 20 road, laying of DWC Pipe 120 mm OD, Refilling of cable trench by excavated soil & ramming after laying of cables and restoring the road surface to its original condition including necessary earth work and asphating with contractor's own material.as per instructions of Railway site Engineer In charge. (ROAD CROSSING) Drg. No. S&T /C/SK/168.
500
1311
655500
... More
Laying of 6 Quad cable & Jelly filled U/G tele cable/Power cable as per approved cable route plan in the excavated trench, taking due care while transporting and laying of the cable also 21 includes pulling of 0+0+6 Quad cable inside existing station building and making suitable loop without cutting of cables at the entry/exit of the cable and inside the station building where ever required. Cable to be protected with DWC pipe and suitable clamping arrangement as per instructions of Rly. engineer at site.
57
3052
173981.67
... More
Supply of thermo shrink Jointing kit (Reinforced) TSF-2 type generally conforming to 22 R D S O Specification No.RDSO/SPN/TC/57/2015 Rev 1 with modified kit contents as per CSTE Specification No.CR/SPN/TC/57 (A)/2015 dtd 06.01.2015(Table -A) to be suitable for jointing both 10/20/50 pair PIJF and 4/6 Quad cables alongwith sub-kit(Table-B) for armour continuity. (Inspection by RDSO)
50
3530
176526
... More
Supply of 1T VF Transformers as per Specn. No. TC - 22/76 (1T Transformer : 470:1120 Ohms) (Inspection by Consginee)
20
839
16783.4
... More
Supply of Krone DP 2O Pair in metal box with locking arrangement & Krone module for 2O oatr ( Spec. No G/CTN-10/03 June 2005) (Inspection by Consignee)
12
1230
14770.44
... More
Supply & fixing of PVC channel with cover, 25 mm width & running PVC switch board cable through PVC channel. (inspection by Consginee) 26
1500
34
51810
... More
Supply & installation of Cable Route Markers.(Concrete). Inspection by Consignee)
1000
359
359000
... More
Supply of 6 pin Emergency Socket Box made of FRP material as per RDSO Specification No. RDSO/SPN/TC/44/2002 version - 2 with latest amendments. (Inspection by RDSO)
45
4976
223955.55
... More
Supply of 6 pin Emergency socket Flat type as per specn - TC 42/87. (Inspection by Consignee)
45
424
19101.6
... More
Supply of MS Plate of 300 mm x 300 mm x 8 mm complete with nut bolts.(Inspection by Consignee)
45
363
16373.25
... More
Fabrication of EC Socket asembly & erection of fabricated assembly at location indicated in the cable route chart and as directed by Engineer-in-charge. This includes cutting of Rail 30 post of required size supply & welding of GI pipe & base plate, fixing of socket box, transportation of material to site, digging of pit & erection of whole assembly Termination of derivation cable on strip inside emergency socket box. Rail post will be supplied by Rly. free of cost at nominated place SSE (Tele/C)
45
5970
268677.45
... More
Supply of paint & painting of Emergency Socket assembly by applying one coat of Red 31 Oxide as base colour, painting the assembly as per Zebra painting in white & Black colour. The width of each strip shall be 4" (100 mm). The paint shall be either from Asian/ Shalimar/ Apcolite paint having ISI mark (Inspection by Consignee)
45
615
27681.75
... More
Arrow marking for EC Pole as per practice of Central Railway and instructions of site Engineer.
600
127
76458
... More
Supply of VF isolation transformer of various type 1120:600, 1120:470, 1120:1120) Exact requirement will be advised by Engineer in charge. (Inspection by Consignee) 34
50
923
46199.5
... More
Supply and fixing of 20 Pair Krone SMC (Fibre) DP Box. (inspection by Consignee)
6
1529
9179.52
... More
Making of 2T VF Transformer joint between U/G PIJF Cable & Quad cable suitable for emergency/derivation joint and construction of brick chamber for protection of joint with contractor's own material.(IRS:TC:22/76)
50
850
42500.5
... More
Supply of Emergency portable Control Telephone as per RDSO specn. No. ( TC / 34/ 97 ) TC /78 / 2000 with amend 3 or latest.
15
1897
28461.45
... More
Fixing of the EC Socket complete with termination of derivation cable on strip inside the EC box duly mounted on good quality board at SM's building /cabin & wherever necessary as per of Engineer - in - charge.
50
896
44820
... More
Installation, Testing and commissioning of complete 6 Quad system/equipments end to end with matching transformer for main control/Emergency control/Scada as per instruction of site 38 engineer. This includes section wise complete testing of Quad cable communication standard parameters i.e. Attenuation, FEXT, NEXT, Insulation etc.Testing results of all parameters to be provided in five copies duly printed in good quality on A4 size papers and has to be arranged in good quality folders. All measuring and testing equipments required for this activity should be arranged by contractor.
6
7463
44779.5
... More
Supply of Cable Route Locator along with all required accessories make Stanlay model MXL4 DBG or similar as per annexure. (Inspection by Consignee) 40
1
263884
263884.64
... More
Supply and fixing of 50 Pair Krone SMC (Fibre) DP Box. (inspection by Consignee) 41
20
2588
51761
... More
Switch Board Cable 5 Pair, 0.63 mm dia. (Inspection by Consignee) 42
1000
27
27690
... More
Switch Board Cable 10 Pair, 0.63 mm dia. (Inspection by Consignee) 43
1000
51
51900
... More
Switch Board Cable 20 Pair, 0.63 MM mm dia. (Inspection by Consignee)
1000
103
103800
... More
Supply Way side control communication Instruments (Telephone) used for connecting the way side telephone with way side equipment matching with above system confirming to Spen.No.TEC GR/TEL-02/04 Sept 02 with latest amendment, if any. (Inspection by Consignee)
40
678
27143.2
... More
Supply of Plan 1+1 phone Beetel Make model No. M-78 or similar.(Inspection by Consignee)
6
3582
21492
... More
Supply of push button telephones of two lines of Panasonic make Model No.KX/TS/27 MX-W or similar with all feature with all accessories or latest. (Inspection by Consignee)
6
4067
24402.18
... More
Hand free two line telephone having facility or remotely speaking through base station & dialling from both base & hand set.
20
4988
99779.4
... More
Supply of cable fault locator kit comprising of cable avoidance tool SVG DIGITAL SIGNAL generator signal clamp necessary 25 k.m range. (Inspection by Consignee)
5
318929
1594649.4
... More
Supply of GI Pipe 80 mm bore size, medium grade along with sockets and material 49 required for fixing on Girders, Bridges i.e. suitable MS Bars and clamps at the interval of 2 mtrs including bend pipes at the ends and brick masonary work at both ends with contractors own material. The design of the clamp shall have prior approval of Rly Engineer. Suitable anti thefft holes to be provided in the pipe before laying as per instruction of site In-Enggineer. (Inspection by RITES)
1000
735
735370
... More
Installation of GI Pipe 80 mm bore size, medium grade along with sockets and material 50 required for fixing on Girders, Bridges i.e. suitable MS Bars and clamps at the interval of 2 mtrs including bend pipes at the ends and brick masonary work at both ends with contractors own material. The design of the clamp shall have prior approval of Rly Engineer. Suitable anti thefft holes to be provided in the pipe before laying as per instruction of site In-Enggineer.
1000
72
72560
... More
Supply and fixing of Transformer Bay rack to accommodate isolation transformer at ASM office SS/SP/SSP and wiring of isolation transformers as per instructions of Site Engineer & as per drg.No.SK/CSTE/C/97/27. (Inspection by Consignee)
6
1581
9491.94
... More
Supply of Cross Talk Meter as per IRC/TC 45/88 with latest amendments. (Inspection by Consignee)
2
84475
168951.52
... More
Supply of Transmission Measuring Set as per IRS /TC- 43/87 or latest, APLAB make Model No. 2031 or similar with Tone Generator & DB Meter. (Inspection by Consignee)
2
48191
96382.66
... More
Supply of Digital Earth Resistance Tester with RSR technology 0.01 to 1999 Ohms with complete testing kit , earth voltage measurement up to 200 V AC Model DET-20 or Motwani or FLUKE , MEGGER make.(Inspection by Consignee)
3
55264
165792.21
... More
Preparation of final built up cable laid plan on auto cad for the section after completion 1 of all cable laying and termination done. This includes supply of necessary documents on tracing paper along with five prints of cable route plan,jointing schedule,cable hut wiring diagram,emergency sockets, man holes etc. as per directions by Engineer.
5
1664
8320.3
... More
Supply of HDPE Telecom duct 50mm dia solid permanently lubricted inner dia 42mm. & wall thickness 4mm. with end plugs, coupplers cable sealing plugs and duct coller etc. to be supplied from TEC approved sources with all accessaries. (Inspection by RITES)
50
86202
4310131.5
... More
Supply of patch cords,15 Mtrs.Long with FCBC connectors. As per TEC spcfn no G/OFJ- 01/03 June-99 GR/OFJ/01/04 AUG 04 with latest ammendments (Inspection by Consignee)
20
1457
29148
... More
Laying of OFC with blowing technology in HDPE duct as per approved cable route plan 4 in the excavated trench,taking due care while transporting This work includes laying of OFC cable inside the trenches, pulling through GI pipes in rocky area, existing station building and making suitable loop without cutting of cable at the entry/exit.
50
15389
769488
... More
Splicing of 24*2 fibre OFC and making the splice joint with contractor's own splicing machine & tools. Splice loss of each fibre should be less than/equal to 0.05 db splice reflectance should be bettter than 60 db.
25
7435
185879.5
... More
Supply, Transportation & Installation of RCC chamber (Jointing Chamber) as per drawing with cover & required trenching to ease out cable/duct. (The joint chember should be of the 6 size of outer dia. 1100 mm., Height 600mm (2 pieces of 300 mm each). The thickness of the wall should be 50 mm & each piece of the chamber should have suitable groves to fit each other). This also includes digging a pit for RCC chamber. The pit shall be of suitable diamention for fixing the chamber in the pit. The chamber shall be 30 Cms. below the ground level. The chamber shall be filled with the sand after keeping the OFC straight joint. (Inspection by Consignee)
30
5428
162856.8
... More
Supply AND INSTALLATION of Fibre management system Birla 3 M/TVS R&M make 7 suitable for 48 fibres with 48 pig tails, FCPC connectors splicing tray etc. This includes provision of termination of two no of optic fibre cable along with rack with mounting arrangement. (Inspection by Consignee)
6
38965
233790.78
... More
Supply of main frame OTDR suitable for operating at 1310nm. and having dynamic range of 40/30 Db. with inbuilt printer 4L sampling resolution, single mode light source and power 8 meter with talk back set, Visual fault locator option for OTDR module, colour screen, carrying case, spare battery pack, power chord, AC-DC adaptor, user's guide etc., conforming to TEC specn. no. G/OTD/01/02 Nov 98 with latest amendment similar to ACTERNA model MTS 5200e or similar. (Inspection by Consignee)
2
335393
670787.08
... More
Supply of Optical Power Meter as per specification, SPECIFICATION:- ATM 100 Optical Power Meter or similar model with (1) 270,1000,2000 Hz tone detection (2) Wide measurement 9 range:-Max. 78 dB, High resolution:0.01 dB, Good accuracy: 0.2 dB (3) Insertion loss in dB, (4) Sm or MM applications (5) FP/PC and 2.5 mm universal connector (6) 850/1300/1310/1490/1550nm calibrated wavelengths (7) ATM 100 is for Telecom testing (8) Energy save mode; about 10 minutes no operation will cause the device automatic power off (can be cancelled) (9) Reference value storage (10) Full energy can support above 100hrs operation. (Inspection by Consignee)
2
7536
15072.66
... More
Supply of Telecommunication tools se t 50 pieces at least including various screw drivers and sloding iron. (Inspection by Consignee)
1
13909
13909
... More
Supply of DWC HDPE Pipe with one snap fit coupler and 'O' ring fire resistant, anti rodent,in 6mtr length of size 120 mm outer dia as per RDSO /SPN /204/2011/Ver 1.1 with Amdt 1 or latest. (Inspection by RITES) 12
500
379
189645
... More
Laying of HDPE duct in trench and its protective work as per direction of site engineer.
50
7242
362140
... More
Supply & Installation of Desktype electronic magneto telephone as per spec IRS TC 79/2000 or with any latest amendments. (Inpsection by Consignee)
6
3873
23243.88
... More
Training of Railway officials in optical fibre communication system and handling of test and measuring instruments
10
12390
123900
... More
Supply of lightening current arrestors for single phase Class B type as per VDE 15 classification, housed in a suitable impact resistance box, consisting of (a) one module connected between phase & neutral (b) one modeule to be connected between neutral & earth as per technical specifications. (Inspection by RDSO)
30
13638
409141.5
... More
Supply of lightening current arrestors for single phase Class C type as pr VDE 16 classification, housing in a suitable impact resistance box, consisting of (a) one module connected between phase & neutral (b) one module to be connected between neutral & earth with failure indicaton & addl. No.NC contract for remote signalling unit as per technical specifications mentioned in Annexure . (Inspection by RDSO)
30
10228
306856.2
... More
Installation, wiring, testing & commissioning of lightening current arrestor & surge arrestor supplied as mentioned above, as per instructions of Railway Engineer. Inspection by consignee.
60
1843
110623.8
... More
Supply of Sealed Maintenance free SMF (VRLA) Battery 12 Volts - 75 AH as per IS- 15549 make Exide Power Safe EP-75-12V Panasonic AMCO or Amaraja Make. (Inspection by Consignee)
6
5732
34392.48
... More
Supply of SMPS 12 Volts 15 Amps Battery Charger for 25 Watt VHF equipment trans receiver. Make Kenwood or Motorola or Rexon similar to work with Kenwood make model No. Model TK-7160 Model No. Nodm BM-100. (Inspection by Consignee)
6
1993
11963.7
... More
Supply of RCC pipe half round of size 150 mm dia outer and 100 mm dia internal 1 Mtr long matching to IS No. 458/2003 amendment-1 with Rev 4. (Inspection by RITES)
12500
243
3040625
... More
Horizontal boring of cable duct of minimum 2.0 Mtr depth along with laying of 120 mm HDPE pipe for track crossing with minimum depth reckoned from bottom of the rail/Road crossing with 4 minimum depth reckoned from ground level. The work shall be done as per extant practice & instruction of site engineer. Preparation of site or Horizontal Boring shall be caried out in presence of Railway Representative. HDPE will be suplied by Railways. Note: Contractor shall provide all material required for boaring and adequate nos. of laboures for proper laying f cables nto the bore. Cable shall be laid cautiously so that t should not get damage due to rogh handling & pressure on cable.
1000
3080
3080340
... More
Laying of DWC/RCC pipes alongwith collars / RCC half round pipes in trenches at places of track and road crossings, platform cuttings etc.
1000
67
67080
... More
Supply of Apparatus Case with godown locks with deatachable handle on both the doors. Half Case as per Drg No SK 783-1/2. with latest alteration. (Inspection by RITES)
75
15167
1137573.75
... More
Excavation and Casting of Apparatus Case foundation with contractors Anchor bolts, cement, ballast and other materials.The required Scaffolding Ferma etc for Casting of foundation will have to be brought by the contractor ar his own cost Half Case as per Drg No SK 804
75
11438
857913
... More
Erection of Apparatus Cases. This includes filling of location foundations and plastering Half Case
75
994
74552.25
... More
Supply of Standard 19" Rack Mountable LER(Label Edge Router) , IP- MPLS Router with Redundant DC power feed -48V DC nominal, equipped with interfaces: 2 x 10G (optical) SFP+ Ports along with 2 Nos of 40 Kms 10G SFP+ LC Modules, 4 x 1GbE (Optical) interface along with 4 Nos of 1 1GbE Single Mode Bi-directional SFP (10KMs) Modules and 4 x 1GbE (Copper) interfaces & Modules and slot for 16 x E1 (G.703), Mounting kit with all necessary accessories & Software, Perpetual Licenses. With options of either upgrading to have a total of 32xE1 (G.703) ports by way of adding / replacing interface cards or should be possible to add 2xSTM-1 (channelized, optical) ports. As Per RDSO Document No. STT/TAN/IP-MPLS/2020 Version 01 or latest. (Inspection by RDSO)
2
394787
789575.04
... More
Supply of 2 x 10G Adapter Interface without 10G SFP + Modules for LER Routers. (Inspection by RDSO)
2
60440
120881.08
... More
"Supply of 8 x 1G Adapter Interface (any combination: one nos of 8 x 1G or two nos of 4 x 1G) without SFP for LER Routers. (Inspection by RDSO)"
2
63462
126925.14
... More
1G SFP Module with 10 Km range for above Routers. (Inspection by RDSO)
12
1259
15110.16
... More
"Supply and installation of 16 port E1 Card along with Patch panel/Krone Module and wiring for Routers with all accessories etc. (Inspection by RDSO)" 6
6
108289
649735.86
... More
"10G SFP+ Module with 40 Km range for above Routers. (Inspection by RDSO)"
2
104564
209129.32
... More
Supply and installation of NMS as per RDSO specification no. STT/TAN/IP-MPLS/2020 7 ver. 10 or latest for zonal/divisional HQ NOC with active, stanby system hardware and 5KVA online UPS with 1 Hours backup(min 42AH battery). (APC/Numeric/TATA Libert make). This includes supply of 5 nos portable monitoring teminal loaded with NMS for client for the sectional maintenance (Inspection by RDSO)
1
1323700
1323700
... More
Supply of Standard 19" Rack Mountable Modular Chassis LSR (Label Switch Router) IP- MPLS Router with Redundant DC power feed -48V DC nominal Redundant Controller Card, equipped with interfaces: 8 x 10G (optical) SFP+ Ports along with 8 Nos of 40 Kms 10 G SFP+ Modules, 8 Mounting Kit with all necessary accessories & Software, Perpetual Licenses. The system should have all the functional & technical requirements of LSR including General specification arctiure protocol supported, quality of service, security, performnace, certificates & enviorment of standards of RDSO TAN document No. STT/TAN/IPMPLS/2020. As Per RDSO Document No. STT/TAN/IP-MPLS/2020 Version 01 or latest. (Inspection by RDSO)
3
1788750
5366252.76
... More
Supply of fiber optic patch cord with FCPC to SCPC/LCPC connectors (10 Mtrs long) as per RDSO Specification No.RDSO/SPN/TC/69 /2007 Rev 0 or latest, so as to suit the OFC termination and the IPMPLS equipments supplied. (Inspection by Consignee)
30
198
5946.3
... More
Supply of DDF (120 Ohms)for terminating 16 E1 s of wrapping type and mountable on 19" rack. (Maximum width 2U size) (Inspection by Consignee)
4
2528
10113.08
... More
Installation of IP MPLS Router and swithes with power distribution panel and all accessories in the Rack (19" 42 U), DDF, aluminium runway ladder, patchcord etc and their testing and commissioning . This includes termination of all E1's on DDF, connection of pigtails, optical patch 11 cords and 48V bus to the IP-MPLS equipment including supply of wires and connectors. It also include propermounting of rack, provision of Aluminium runway ladder, casing and capping and conduit pipe as per requirement at each station, other materials from stores supplied by railways for installation. ( Conduit pipe/casing and capping, aluminium runway ladder and all other miscelleneous materials should be supplied by the contractor.
5
22313
111569
... More
Installation, wiring and testing of battery sets and battery chargers for optic fiber circuits. This includes installation of AC and DC power supply distribution board with MCB's of suitable rating, cable ladder, wiring of external alarm contacts, fixing arrangements for battery and charger in the equipment room with 25 sq. mm multistarnd core copper cable PVC insulated from battery charger to battery with suitable copper lugs crimped /soldered to it, 16 sq. mm multistarnd single core 12 copper cable PVC insulated from battery cahrger to power distribution panelin the rack with suitable copper lugs crimped /soldered to it. Connection from battery charger body and battery +ve terminal to earth terminal by 16 sq. mm multistrand single core copper cable PVC insulated seperately with suitable copper lugs crimped /soldered to it and extension of AC 230 V power supply wiring through PVC pipe with 6 sq mm cu.wire for phase & neutral and 1 sqmm cu. wire for earth to the 19" rack (Copper cables , 20A metal clad with MCB for AC supply to fix in the wall, conduits and other miscellaneous materials required for the work should be supplied by the contractor. This work alsoincludes transportation of materials from stores/supplied by railways for installation.
5
15160
75800.75
... More
Laying of STP/OFC/Power Cable/Switch Board (10pair/20 pair/50 pair) cables in 1" PVC 13 conduit/case capping and clamping on the wall /roof tops/Shelters with suitable clamping and hose to be provided where ever bends/curves (PVC conduit/case capping and other accessories to be suppliied by the contractor).
1000
35
35930
... More
Integration, testing and Final commissioning of equipments at each station for all the 14 equipments conforming with approved system design including end to end testing for realization optical fiber system. This also includes supply of all as made documents for the entiresection(six copies) plus technical , maintenance and installation manuals for IPMPLS, NMS, charger and power suply unit with OEM certificate. Station=per staion.
6
153609
921658.26
... More
Training of Railway staff and officer at the factory premises/ railway site of 15 manufacturer of IPMPLS equipment (or) at a reputed training institution as approved by railway executive incharge. (Travel expenses will be borne by the railways).
10
16735
167353.5
... More
"Supply of Communication Server as per clause 5 and 6 of RDSO Specification no. RDSO/SPN/TC/99/2012 Rev.2 or Latest , Communication server block Shall be provided with (1+1) redundancy. (Inspection by RDSO) "
1
2419000
2419000
... More
"Supply of Network Management Server as per clause 5 and 8 of RDSO Specification no. RDSO/SPN/TC/99/2012 Rev.2 or Latest. (Inspection by RDSO) "
1
575230
575230
... More
"Supply of Voice Recording Server as per clause 5 and 7 of RDSO Specification no. RDSO/SPN/TC/99/2012 Rev.2 or Latest. (Inspection by RDSO) "
1
617050
617050
... More
"Supply of The Portable Maintenance Terminal as per clause 8.9 of RDSO Specification no. RDSO/SPN/TC/99/2012 Rev.2 or Latest .Inspection by RDSO."
1
61500
61500
... More
"Supply of Event Notification Gateway as per clause 12.3 of RDSO Specification no. RDSO/SPN/TC/99/2012 Rev.2 or Latest . (Inspection by RDSO) "
1
338660
338660
... More
Supply of Desktop Client PC as Per Clause 8.7 and 8.8 of RDSO/SPN/TC/99/2012 Rev.2 or latest. (Inspection by RDSO)
1
69700
69700
... More
"Supply of Client PC for Voice Recorded Server as Per Clause 8.8 of RDSO/SPN/TC/99/2012 Rev.2 or latest along with UPS .Inspection by RDSO. "
1
69700
69700
... More
"Supply of controller Console as per cause 9 of RDSO/SPN/TC/99/2012 Rev.2 or Latest. (Inspection by RDSO) "
2
420906
841812
... More
"Supply of Test room Console as per clause 10 of RDSO/SPN/TC/99/2012 Rev.2 or Latest. (Inspection by RDSO) "
1
416953
416953
... More
Supply of Gateway for Emergency communication at HQ/way station as per Clause 13 of RDSO/SPN/TC/99/2012 Rev.2 or Latest. (Inspection by RDSO)
5
121245
606225
... More
Supply of control IP telephones without hands free and gooseneck operation for way side station as per clause 11of RDSO/SPN/TC/99/2012 Rev.2 or Latest . (Inspection by RDSO)
5
27576
137883
... More
Supply of FXO Gateway 16 Port as per clause 12 of RDSO/SPN/TC/99/2012 Rev.2 or Latest. (Inspection by RDSO)
1
77408
77408
... More
"Supply of DTMF Gateway 4 Port as per clause 12 of RDSO/SPN/TC/99/2012 Rev.2 or Latest. (Inspection by RDSO)"
1
121245
121245
... More
"Supply of Gateways to be provided at Way Station (WSGW) for analog telephones as per RDSO/SPN/TC /99/2012 Rev.2 or latest - 4 Port. (Inspection by RDSO)"
20
8224
164492
... More
"Supply of Mobile Application for event Notification Gateway as per clause 12.3 of RDSO/SPN/TC/99/2012 Rev.2 or Latest. (Inspection by Consignee)"
6
11611
69667.2
... More
i) Supply of IP Communication Server System with PSU & CPU Duplicated in Hot stand 1 by Mode as per technical specifications given. It shall have 1 x 30 party one touch key group conferencing (minimum 30 party. Each System should be supplied & equipped with minimum: (Inspection by Consignee)
1
256480
256480
... More
Supply of Analog extensions with CLI and massage waiting indication support. (Inspection by Consignee) (Unit Numbers = Ports) 3
-
-
2
... More
Supply of Digital extensions. (Inspection by Consignee) (Unit Numbers = Ports) 4
10
1870
18704
... More
Supply of ISDN PRI / E1 trunks. (Inspection by Consignee) (Unit Numbers = Ports)
15
1870
28056
... More
"Supply of 24 Ports IPDSLAM ADSL 2+ZYXEL OR PLANNET MAKE. (Inspection by Consignee) "
2
100464
200928
... More
Supply of ADSL2+ Wi-FiModem Router withfollowing minimumspecifications 2x 5dBi 6 Omnidirectional antennas,802.11n, 802.11b, 802.11gcompatible, Interface 4numbers of 10/100MbpsRJ45 Ports and 1 RJ11 Port.Make airpro, Dlink, tplinkwith Latest Model with 2 X9dbi Antenna. Conformingto Tender DocumentChapter VI. (Inspection by Consignee)
5
1174
5870
... More
Supply, Installation, Testing and commissioning of On- Line 5 KVA UPS (Inspection by Consignee)
5
199500
997500
... More
Supply of covered 19'' racks of size 2200mm X 600mm X600mm (WQ/VERO President /RITTAL/APC make.) compleate with all fittings including DC fans (48V) -2Nos. , Seperator sheet /Plate 8 to keep testing equipments-1 no and AC power distribution pannel (horizontal fitting) with power socket with fuse/MCB protection (minimum 6 nos. of 230V-15A/5A combined) and compatibility with all equipment conforming to Din-41494 or equivalent EIA/ISO/EN standard manufacturer must certify that products are complied with DIN-41494 or equivalent EIA/ISO/EN/CEA/UL standards. (Inspection by Consignee)
2
48256
96512
... More
Supply and Installaltion of 150 LINE KRONE MDF for System side cable termination and 150 line field side termination. (Inspection by Consignee)
2
22679
45358.04
... More
Supply of E-1 to Ethernet convertor of RAD or loop or similar reputed make. (Inspection by Consignee) 11
5
8096
40480
... More
Supply of Handheld Digital Multi meter. (Inspection by Consignee)
2
4472
8944
... More
Supply of 8 port FXS gateway (AC based) including mounting kit including all other accessories. (Inspection by Consignee)
5
23647
118235.5
... More
Supply and Installation of layer 2 switch as per RDSO/SPN/TC/65/2021. Rev. 6.0 or 13 latest. Minimum 8+2 Port Manageable with 8 Nos. 10/100/1000 Mbps. Ethernet Port POE+& Single Fiber 2 Nos. 1G SFP Port with BX SM SFP Optical Modules loaded including mounting kit and all the accessories. (Inspection by Consignee)
5
34510
172550.4
... More
"Supply of STP CAT-6E Networking Cable, having identification marks at regular interval, confirming to clause No.3.33 of Chapter III of Tender Document. (Inspection by Consignee) "
5000
19
99750
... More
Supply and insttalation of I/O box (D-Link/DG Sole/I ball make)with connector for termination of UTP cable. (Inspection by Consignee)
15
199
2994
... More
Supply of OFC patch cord 15 Mtrs. long with FC PC/Euro 2000 or latest connector as per site requirement.
25
1457
36435
... More
Supply of four port LAN Extenders, 2 Mbps GSHDSL with Line Protection Module and 17 Dual Mode Power Supply i.e. 230 V AC & 48 V DC confirming to CSTE Central Railway, Specification No. CR/SPN/T/80/2015 Rev. 0.0 or latest make Cygnus or ATIRE 5300 or Dax or similar. (Inspection by Consignee)
15
18000
270000
... More
Supply of 2MBPS/64 Kbps Modem in Pair (V.35 & G.703) capable work up to 6 kms on 18 0.5mm dia copper cable, speed 2.048 Mbps HDSL (High bit rate digital subscriber lines) Dual mode power supply i.e. 230V AC and 48 V DC for G.703 and 230 V AC for V.35 and network management support as per RDSO Spec. No. RDSO/SPN/TC/80/2013 Rev.1 for latest make Cygnus Model 850 or Team link Model 3002HA OR RAD Model ASMI 52. (Inspection by Consignee)
6
20610
123660
... More
Supply and installation of 24 port Gigabit L2 POE Switch with 2 Nos. SFP Modules. (Inspection by Consignee)
-
-
19
... More
Supply installation and commissioning of versatile PA horn speaker 30W with 100V LMT Taps 15, 10 and 5W complete with fixture of make Philips/Ahuja/AKG. (Inspection by Consignee) 21
50
1397
69875
... More
Supply of Wall Mounted Column Speaker. (Inspection by Consignee) 22
25
1795
44895
... More
Supply of Column Speaker. (Inspection by Consignee)
30
2910
87318
... More
Fixing of column type speakers with all types of hardware required as approved by Railways.
30
824
24740.1
... More
Supply of PF Announcement amplifier with all accessories Ahuja make modal OR Studio Master OR NX- Audio OR Shure, Similar to Ahuja Make modal No TZA 7000-Dp. (Inspection by Consignee)
10
43659
436590
... More
Supply of steel Almirah with 4 similar to Godraj Shmiline Storewell. (Inspection by Consignee)
6
23838
143032.68
... More
Supply of Executive sitting Revoling chair with cushion ( High / Low back depending upon personal choice Goderej Modal No PCH-7201R or Higer Modal. (Inspection by Consignee)
4
9394
37579.12
... More
Supply of visitor Chair similar to Godrej PCH-7112 or higher model (Inpection by Consignee)
4
6375
25501.48
... More
Supply of Executive Office Table of Size 1800mm(L)X900mm (w)X750mm(H) having metal frame & square legs with one side 3 drwers & 1 cupboard on the other side and opposite site closed Top pre Lamited Board.(Inspection by Consignee)
4
13611
54446.44
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%