Central Mine Planning And Design Institute Limited Tender
Search from over 12139+ business opportunities that have been announced from the biggest Mahatenders, e tender Maharashtra, Maharashtra government tenders, and the Online Tender Notices posted on Maharashtra e tenders till date. Find opportunities that have come in from the multiple corporations, Maharashtra government departments, State PSUs, and Private companies from the state.
Central Mine Planning And Design Institute Limited - CMPDI Tender
Eprocure
Opening Date11 Dec 2024
Closing Soon27 Dec 2024
Tender Amount₹ 3,52,69,680
Costs
EMD
₹ 4,40,900Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Comprehensive Maintenance Contract Of Upkeeping, Horticulture, Stp, Mosquito Rodent Control, Plumbing Repair Works And Electrical Works Of Complete Residential Colony, Township And Office At Cmpdil, Ri-iv , Kasturba Nagar Jaripatka Nagpur For 2
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_CMPDI_323065_1Tender No
CMPDI/RIN/CE-465(N)/2024/11Tender Authority
Central Mine Planning And Design Institute Limited ViewPurchaser Address
-Website
http://https://www.cmpdi.co.in/Hindi/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Filling available excavated earth (excluding rock) in trenches, plinth. sides of foundations etc. in layers not exceeding 20cm in depth, consolidating Each deposited layer by ramming and watering, lead up to 50 m and for all lift
10
153
1534
... More
Supplying and filling in plinth with sand under floors including, watering, ramming consolidating and dressing complete.
2.5
2191
5477.88
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering-All work upto plinth level: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
30
6937
208129.5
... More
Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement – All work upto plinth level: 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
30
7480
224400
... More
Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete
60
306
18414
... More
Centering and shuttering including strutting, propping etc. and removal of form for Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
100
650
65000
... More
Providing, hoisting and fixing upto floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like including the cost of required centring, shuttering, finishing smooth sills and the like including the cost of required centring, shuttering, but excluding cost of reinforcement with 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size).
2
9220
18440
... More
Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Cold twisted bars
2500
95
238125
... More
Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters : 25mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws.
38
1668
63412.5
... More
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to steel windows by welding
350
180
63315
... More
Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : 100X58X1.90 mm
25
83
2083.75
... More
Structural steel work in single section fixed with or without connecting plate including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
30
103
3094.5
... More
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete. - 40 mm thick with 20 mm nominal size stone aggregate
20
513
10278
... More
Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per Sqm including pointing in white cement mixed with pigment of matching shade complete.
400
1064
425820
... More
Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red, Brown laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigment etc., complete
150
949
142485
... More
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08%and conforming to IS : 15622 , of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) jointing with grey cement slurry @ 3.3kg/Sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm
50
1332
66627.5
... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.(i)Single socketed pipes. 110 mm diameter
15
291
4375.5
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion. Coupler 110mm
5
111
559.25
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion. Bend 87.5° 110 mm bend
5
124
623.5
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion. Shoe (Plain) 110 mm Shoe
3
112
337.65
... More
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110mm
10
285
2857
... More
12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand)
300
290
87045
... More
Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete
500
211
105650
... More
Applying priming coats with primer of approved brand and manufacture having low VOC (volatile Organic Compound) content , content with Water thinnable cement primer on wall surface having VOC content less than 50 gram/ litre.
500
58
29175
... More
Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Two coats.
1250
107
134750
... More
Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. meters and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50metres lead : With cement mortar 1:4 (1 cement : 4 fine sand).
50
451
22572.5
... More
Distempering with 1st quality acrylic distemper(ready mix) having VOC less than 50gms/litre of approved brand and manufacture to give an even shade. Old work (one or more coats)
5000
47
238750
... More
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade. One or more coats on old work.
350
80
28070
... More
Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (One or more coat applied @ 0.90 ltr/10 Sqm).
300
64
19440
... More
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of EIC. 1:3:6 or richer mix
15
1914
28715.25
... More
Demolishing brick work manually/ by mechanical means including In cement mortar
25
1620
40505
... More
Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead: Of area 3 sq. metres and below
20
110
2215
... More
Dismantling steel work in single sections including dismembering and stacking w ithin 50 metres lead in: Channels, angles, tees and flats
100
1
175
... More
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm
450
56
25425
... More
Dismantling of C.I. sluice valve including stacking of useful materials within a lead of 50 metres Up to 150 mm diameter
2
245
491.8
... More
Dismantling of C.I. sluice valve including stacking of useful materials within a lead of 50 metres Above 150 mm diameter
2
909
1819.2
... More
Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.
200
871
174340
... More
Providing and fixing white vitreous china water closet squatting pan (Indian Type). Orissa pattern W.C. pan of size 580 x 440mm
10
2343
23439.5
... More
Providing and fixing white vitreous china pedestal type (European type/wash down type) water closet
10
2111
21116.5
... More
Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 10 litre capacity - White
5
1056
5281.25
... More
Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete :White solid plastic seat with lid
15
541
8116.5
... More
Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings. Flat back wash basin of size 630x450mm
8
1013
8108.4
... More
Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings : Flat back wash basin of size 450x300mm.
5
675
3378
... More
Providing and fixing PVC waste pipe for sink or wash basin including P.V.C. waste fittings complete Semi rigid pipe 32mm dia
12
87
1048.8
... More
Providing and fixing PVC waste pipe for sink or wash basin including P.V.C. waste fittings complete Flexible pipe 32mm dia
50
101
5070
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall .25mm nominal outer dia. Pipes.
30
356
10680
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall .40 mm nominal outer dia. Pipes.
100
606
60675
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall .50 mm nominal outer dia. Pipes.
100
861
86195
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work including cutting chases and making good the walls etc.15 mm nominal outer dia .Pipes.
50
403
20185
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work including cutting chases and making good the walls etc.20 mm nominal outer dia .Pipes.
100
458
45800
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge.External work 25 mm nominal outer dia .Pipes
100
325
32510
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge.External work 40 mm nominal outer dia .Pipes
100
503
50320
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge.External work 50 mm nominal outer dia .Pipes
100
758
75845
... More
Providing and fixing uplasticised PVC connection pipe with brass unions : - 45 cm length 15 mm nominal bore
30
85
2568
... More
Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately): 100 mm diameter Class I
1
4496
4496.95
... More
Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately): 150 mm diameter Class I
1
6920
6920.6
... More
Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : 200 mm diameter Class I
1
11756
11756.25
... More
Providing and fixing G.I.Union in G.I. Pipe including cutting and threading the pipe and making long screws etc. complete (new work) 15 mm nominal bore
2
245
491.3
... More
Providing and fixing G.I.Union in G.I. Pipe including cutting and threading the pipe and making long screws etc. complete (new work)25 mm nominal bore
5
357
1789.5
... More
Providing and fixing G.I.Union in G.I. Pipe including cutting and threading the pipe and making long screws etc. complete (new work) 50 mm nominal bore
2
669
1339.9
... More
Providing and fixing G.I.Union in existing G.I.Pipe line, cutting and threading the pipe and making long screws including excavation,refilling the earth or cutting of wall and making good the same complete wherever required. 15 mm nominal bore
2
633
1266.9
... More
Providing and fixing G.I.Union in existing G.I.Pipe line, cutting and threading the pipe and making long screws including excavation,refilling the earth or cutting of wall and making good the same complete wherever required. 25 mm nominal bore
2
745
1491.4
... More
Providing and fixing G.I.Union in existing G.I.Pipe line, cutting and threading the pipe and making long screws including excavation,refilling the earth or cutting of wall and making good the same complete wherever required. 50 mm nominal bore
2
1198
2397.5
... More
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 15 mm nominal bore.
30
418
12553.5
... More
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.15 mm nominal bore.
10
572
5721
... More
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 a) 15 mm nominal bore
15
520
7812.75
... More
Labour for cutting C.I. Pipe with steel saw 80mm diametre C.I. Pipe
5
110
552
... More
Labour for cutting C.I. Pipe with steel saw 100 mm diametre C.I. Pipe
20
148
2960
... More
Labour for cutting C.I. Pipe with steel saw 150 mm diametre C.I. Pipe
5
278
1390.25
... More
Labour for cutting C.I. Pipe with steel saw 200 mm diametre C.I. Pipe
5
370
1854
... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron)
25
447
11175
... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). Powder coated aluminium (minimum thickness of powder coating 50 micron)
50
527
26380
... More
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5.50 mm thickness (weight not less than 12.50kg/Sqm)
5
1254
6270.25
... More
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/Sqm mixed with water proofing cement compound @ 0.253 kg/Sqm. This layer will be allowed to air cure for 4 hours (b) Second layer of slurry of cement @ 0.242 kg/Sqm mixed with water proofing cement compound @ 0.126 kg/Sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
100
472
47260
... More
Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge.
20
105
2110
... More
Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. All kinds of soil
125
26
3356.25
... More
Brick work with non modular fly ash bricks conforming to IS:12894, class designation 10 average compressive strength in super structure above plinth level up to floor V level in : Cement mortar 1:6 (1 cement : 6 Coarse sand)
5
7528
37640
... More
Half brick masonry with non modular fly ash bricks of class designation 10, conformingio IS :12894, in super structure above plinth and upto floor V level. Cement mortar 1 : 4 (1 cement : 4 coarse sand)
10
951
9510
... More
Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50m outside the periphery of the area cleared.
25000
13
346250
... More
Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared.
120000
7
846000
... More
Providing and fixing aluminum U beading of required size to Pre-laminated /flush door shutter including fixing etc. complete as per direction of Engineer-in-charge.
50
467
23380
... More
Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: G.S. sheet
30
127
3829.5
... More
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per Sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
30
591
17757
... More
Providing and fixing ISI marked oxidised M.S. handles conforming toIS:4992 with necessary screws etc. complete as per instruction of engineer in charge.(copper oxidized as per IS:1378) 100mm
30
32
969
... More
Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge.
50
103
5180
... More
Laying old cement concrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineerin- charge. (Old CC paver blocks shall be supplied by the department free of cost).
50
352
17647.5
... More
Extra for providing frosted glass panes 4 mm thick (weight not less than 10 kg per Sqm) instead of ordinary float glass panes 4 mm thick (weight not less than 10 kg per Sqm) in doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured).
50
170
8522.5
... More
Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with blEaching powder @ 0.5gm per litre capacity of tank, including disposing of malba, all complete as per direction of Engineer-in-Charge. (during the cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account) (B ,C, D type quarters. 129000ltrs)
8
28380
227040
... More
Cleaning of under ground sump, Over Head R.C.C. Tank (independent staging) including disposal of slit and rubbish, all as per direction of Engineer-in-Charge. The cleaning shall consist following operations:- (i) Tank shall be emptied of water by pumping & bottom shall be cleaned of slit and other deposits.(ii) Entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water. (iii) Chlorination of RCC internal surface by liquid chlorine. (3.75 lakhs ltr)
8
3769
30152
... More
Brick work with Flyash local cement bricks in foundation and plinth in: Cement mortar 1:4 ( cement : 4 coarse sand)
2
8636
17272
... More
Hiring Charges for JCB/Loader/ Excavator including cost of operator diesel etc for using the machine for excavating, levelling, trenching, loading and etc complete as per instruction of EIC
100
1173
117300
... More
Half brick masonry with Flyash local cement bricks in foundation and plinth in cement mortar 1:4 (1 cement : 4 coarse sand)
10
981
9819.1
... More
Renewing glass panes with putty and nails wherever necessary - Pin headed glass 3.5mm thick
40
861
34440
... More
Repairing of flush, aluminium door by easy adjusting doors of residential quarters as required and as per instruction of EIC
160
182
29120
... More
Removing damaged and replacing fly proof powder coated aluminium wire guage -0.35mm dia wire and aperture 1.4 mm in both directions for doors, windows etc and as per direction of EIC.
200
618
123600
... More
Providing and fixing M.S. butt hinges heavy duty with necessary welding work including removal and fitting of window shutter as per instruction of EIC Ground floor quarters
10
265
2650
... More
Providing and fixing M.S. butt hinges heavy duty with necessary welding work including removal and fitting of window shutter as per instruction of EIC upto First floor quarters
10
383
3830
... More
Providing and fixing M.S. butt hinges heavy duty with necessary welding work including removal and fitting of window shutter as per instruction of EIC Above First Floor and upto floor V level quarters
25
559
13975
... More
Providing and fixing 18mm thick laminated plywood shelf on wooden brackets in cupboards and other area as per direction of EIC
25
1539
38475
... More
Providing and fixing cast iron steel window fastener with necessary screws.Complete.
20
69
1380
... More
Providing and fixing steel Waste Coupling for washbasin and sink, of approved quality and colour as per direction of EIC
15
346
5190
... More
Providing and fixing C.P.pillar cock (ISI) jaquar make continental or equivalent as per direction of EIC
20
1050
21000
... More
Providing and fixing C.P.Towel rail 24" jaquar make continental or equivalent as per direction of EIC
20
1506
30120
... More
Providing and fixing 10 cm Rigid PVC Nahani Trap of SLR quality incuding S.S grating of required diameter and making good the holes and repairs, testing etc. complete as directed by Engineer In charge .
10
1329
13290
... More
Cleaning of chokes/Jams in wash basins, kitchen sinks nahni traps by choke remover/hand pump or by manually including cost of all tools & plants required to clear the choke including removing the debris at places as directed by Engineer-Incharge
100
101
10100
... More
Opening traps, water pipes and refitting for cleaning chokes/blockages in wash basins, kitchen sink, waste lines, trap door etc. The rate shall be inclusive of tools & plants required to open and refixing in position etc. complete
20
173
3460
... More
Cleaning blockages etc. in WC pans, traps and connected soil waste pipe etc. complete to the satisfaction of Engineer Incharge
30
196
5880
... More
Cleaning blockages in gully trap chambers of waste water from kitchen etc using poking rods, bamboo laths etc.
30
101
3030
... More
Cleaning blockages chokes in sewer lines, chamber etc. (Chamber with sewer line upto 15m on either sides)
60
1003
60180
... More
Repairing leakages/drippings in water taps, stop cocks, bib cocks, pillar cocks, showers, overflow & discharge pipe of flushing cisterns, waste pipes of wash basins/kitchen sinks etc.Replacing Washers
150
64
9600
... More
Repairing leakages/drippings in water taps, stop cocks, bib cocks, pillar cocks, showers, overflow & discharge pipe of flushing cisterns, waste pipes of wash basins/kitchen sinks etc.Replacing spindles with washers
150
155
23250
... More
Repairing leakages/drippings in water taps, stop cocks, bib cocks, pillar cocks, showers, overflow & discharge pipe of flushing cisterns, waste pipes of wash basins/kitchen sinks etc.Without using any material. Only by opening, cleaning and refixing.
50
50
2500
... More
Providing & fixing G.I. fitting after removing damaged fitting and stacking at places as directed by Engineer-In-Charge G.I. Fittings like elbow, Bend, socket, Tee,back nuts, reducers, enlargers, plugs etc 15 mm dia
20
77
1540
... More
Providing & fixing G.I. fitting after removing damaged fitting and stacking at places as directed by Engineer-In-Charge G.I. Fittings like elbow, Bend, socket, Tee,back nuts, reducers, enlargers, plugs etc 25 mm dia
20
138
2760
... More
Providing & fixing G.I. fitting after removing damaged fitting and stacking at places as directed by Engineer-In-Charge G.I. Fittings like elbow, Bend, socket, Tee,back nuts, reducers, enlargers, plugs etc 50 mm dia
10
302
3020
... More
Providing & fixing G.I. fitting after removing damaged fitting and stacking at places as directed by Engineer-In-Charge G.I. Nipples 15 mm dia up to 50 mm to 150 mm long
10
91
910
... More
Providing & fixing G.I. fitting after removing damaged fitting and stacking at places as directed by Engineer-In-Charge G.I. Nipples 15 mm dia - 230mm to 300 mm
10
167
1670
... More
Providing & fixing G.I. fitting after removing damaged fitting and stacking at places as directed by Engineer-In-Charge G.I. Nipples 25 mm dia - 50mm to 150 mm long
10
150
1500
... More
Providing & fixing G.I. fitting after removing damaged fitting and stacking at places as directed by Engineer-In-Charge G.I. Nipples 25 mm dia - 230mm to 300 mm long
10
226
2260
... More
Providing & fixing G.I. fitting after removing damaged fitting and stacking at places as directed by Engineer-In-Charge G.I. Nipples 50 mm dia - 150mm to 300 mm long
10
361
3610
... More
Repair of sluice valve 4" to 8" dia (100mm to 200mm) by replacing gland packing, gasket including cost of all material & labour complete.
4
1396
5584
... More
Repair of flushing cistern by replacing worn out parts( full kit) including taking out & refitting ball valve with plastic float, washers, etc.including cost of all material and labour complete as per the instructions of Engineer In charge
15
501
7515
... More
Repair of flushing cistern by Replacing rubber Washers including taking out & refitting ball valve with plastic float, washers, etc.complete as per the instructions of Engineer In charge
60
116
6960
... More
Greasing of all running pumps and installations once in a month providing grease with grease guns complete job as per instruction of Engineer In charge.
4
317
1268
... More
Replacement of worn out bush in pumps/motor including cost of opening of pump & refixing in position
4
1133
4532
... More
Opening & closing wheel valves and supplying water to colony , office building and 2 No.s of fountain ponds as and when required in morning or evening including operation of pumps, 2 nos. main valves and about 40 nos. rising main valves in buildings without wastage of water through overflows
730
822
600060
... More
Removing of C.I. nanhi trap and adjoining concrete and disposal of serviceable and unserviceable material at places as directed by Engineer In charge
10
203
2030
... More
Cleaning sanitary pipes at different floor levels by opening inspection door, re-fixing the same by changing of washers, screws, etc. as per requirement including cost ofwasher, screws, etc. complete
15
219
3285
... More
Labour for removing existing G.I. Pipe/CPVC fittings etc as per instruction of Engineer Incharge height upto Vth Floor 15mm to 50mm
150
33
4950
... More
Labour for removing existing C.I Pipe& fittings etc as per instruction of Engineer Incharge height upto Vth Floor Above 50 upto 150mm
100
294
29400
... More
Providing and fixing leather flaps of 125mm dia after removing damaged leather washer from the foot valve, refixing etc. complete
4
384
1536
... More
Providing and fixing UPVC soil/ vent waste SWR pipe fittings of required diameter confirming to IS 13592 and IS 4985 to withstand continuous hydraulic pressure of 4 kg/cm2 including necessary fixtures and jointing with rubber rings and lubricants on wall by means of clip etc complete as per instruction of Engineer In charge 110 mm elbow/bend with plug
30
258
7740
... More
Providing and fixing UPVC soil/ vent waste SWR pipe fittings of required diameter confirming to IS 13592 and IS 4985 to withstand continuous hydraulic pressure of 4 kg/cm2 including necessary fixtures and jointing with rubber rings and lubricants on wall by means of clip etc complete as per instruction of Engineer In charge 110 mm Tee with plugs
60
310
18600
... More
Providing and fixing UPVC soil/ vent waste SWR pipe of required diameter confirming tp IS 13592 and IS 4985 to withstand continuous hydraulic pressure of 4 kg/cm2 including necessary fixtures and jointing with rubber rings and lubricants on wall by means of clip etc complete as per instruction of Engineer In charge 110 mm dia pipe
250
486
121500
... More
Providing and fixing UPVC soil/ vent waste SWR pipe of required diameter confirming tp IS 13592 and IS 4985 to withstand continuous hydraulic pressure of 4 kg/cm2 including necessary fixtures and jointing with rubber rings and lubricants on wall by means of clip etc complete as per instruction of Engineer In charge 75 mm dia pipe
130
318
41340
... More
Providing and fixing PVC Soil pipe of SWR quality to withstand continuous hydraulic pressure of 6 kg/cm2 joiniting with rubber rings and lubricants on wall / floor by means of clips etc. complete as per instruction of Engineer Incharge.32mm nominal dia
80
174
13920
... More
Providing and fixing 100 mm C P grating for nahni trap
30
40
1200
... More
Providing and laying brick bats in sunk portion of WC as per instruction of EIC
25
1534
38350
... More
Replacing gland packing of centrifugal pump including cost of all material & labour complete.
2
214
428
... More
Providing 25 mm to 30 mm thick partition of polished black kadappa stone slab of approved quality including giving required size and shape etc. Fixing in cement mortar 1:3 curing and cement etc. complete. a) One side polish (Bd.M.35 B/P One Number393)
30
1037
31122
... More
Providing and fixing fibre mesh fly proof net gauze of minimum 110 GSM and 1.4 mm aperture on both sides (Sain Gobain or equivalent brand as approved by EIC) by hook and loop (Velcrow) of 25 mm width by stitching including making arrangement for removing of net by provding zip on two vetical sides including cost of all accessories, fittings and fxing etc complete as per instruction of EIC.
150
584
87600
... More
Providing and fixing hook and loop (Velcrow) of 25 mm width for removing of PVC mosquito net including cost of all accessories, fittings and fixing etc complete as per instruction of EIC.
100
52
5200
... More
Providing and fixing bevelled edge Mirror 40x50cm. With plastic frame of superior glass fixed to cleats with C.P. brass screws and washers complete
40
983
39320
... More
Providing and fixing ABS Plastic Unbreakable 18 Inches x 5 inch Bathroom Wall Mount Rack Shelves (Transparent) for bathroom complete fixed with C.P. brass screws, rawl plugs etc. complete.
30
642
19260
... More
Providing & fixing CPVC fitting after removing damaged fitting and stacking at places as directed by Engineer-In-Charge CPVC Fittings like elbow, Bend, socket, Tee,back nuts, reducers, enlargers, plugs etc 15 mm dia
50
39
1950
... More
Providing & fixing CPVC fitting after removing damaged fitting and stacking at places as directed by Engineer-In-Charge CPVC Fittings like elbow, Bend, socket, Tee,back nuts, reducers, enlargers, plugs etc 25 mm dia
150
62
9300
... More
Providing & fixing CPVC. fitting after removing damaged fitting and stacking at places as directed by Engineer-In-Charge CPVC Fittings like elbow, Bend, socket, Tee,back nuts, reducers, enlargers, plugs etc 40 mm dia
50
181
9050
... More
Providing & fixing CPVC. fitting after removing damaged fitting and stacking at places as directed by Engineer-In-Charge CPVC Fittings like elbow, Bend, socket, Tee,back nuts, reducers, enlargers, plugs etc 50 mm dia
30
323
9690
... More
Supplying and filling in plinth with locally available moorum under floors including, watering, ramming consolidating and dressing complete.
10
1492
14920
... More
Providing and fixing C.P. brass Handshower (healthfaucet) (Jaguar (Cat. No. ALD-CHR-563 ) or equivalent make with 8mm dia.1m long flexible tube having wall hook with approved make including necessary sockets/union nut etc.complete as directed by Engineer in Charge.
25
1073
26825
... More
Providing and fixing aluminium kicking plate 1.00 mm thickness with necessary screws etc. complete.
45
1259
56655
... More
Providing and fixing ISI marked Stainless steel tower bolt with necessary screws etc. complete as per direction of EIC : 250x10 mm
25
266
6650
... More
Providing and fixing ISI marked stainless steel door latches with screws etc. complete as per direction of EIC : 250x20x6 mm
50
219
10950
... More
Providing and fixing ISI marked stainless steel handles with necessary screws etc.complete as per direction of EIC : 125mm
50
83
4150
... More
Providing and fixing half turn CPVC ball valve of approved quality : 25 mm dia nominal bore
10
368
3680
... More
Providing and fixing half turn CPVC ball valve of approved quality : 40 mm dia nominal bore
10
908
9080
... More
Providing and fixing half turn CPVC ball valve of approved quality : 50 mm dia nominal bore
10
1612
16120
... More
Providing and fixing stainless steel pipe curtain rods of 1.0 MM thick with stainless steel plated brackets:25 mm dia (medium type)
150
280
42000
... More
Providing and fixing stainless steel hanging floor door stopper ISI marked with necessary screws etc. complete.Twin rubber stopper
5
52
260
... More
Raking and cleaning the existing floor tile joint, jointing with cement slurry and water proofing material including pointing the joints with white cement and matching pigment etc., complete as per instruction of EIC.
200
97
19400
... More
Complete maintenance of the entire garden features having as per yard stick in the garden area i.e. lawn trees, shrubs, herbs, hedges, flower beds, foliages, creepers etc. including hoeing,weeding, pruning,cutting,trimming, replacement of plants, gap filling, watering, mowing of lawn, grass cutting by lawn mover and brush cutter, removal of garden waste, applying insecticide, pesticide & fertilizers(whenever required) top dressing of lawn with good earth and manure and maintenance of other garden related works as directed by office-in-charge (Cost of Good Earth, Manure, Fertilizer, Insecticide, Pesticide will be provided by the Department & lawn mover and brush cutter with fuel and other T & P material/articles shall be provided by the contractor.) and as per direction of officer in charge.For items from Sr.No. 75 to 77, minimum manpower of 1 no.s ( mali ) needs to be engaged. In the absence the minimum required manpower, the amount will be deducted as per prevailing minimum wages.
(Garden Areas of about 3500 Sqm approx)
610
313
190930
... More
Complete maintenance of shrubs (outside garden features), jobs like making of basin at regular interval,application of fertilizer etc, (excluding the cost of material which shall be paid separately) and as per direction of officer in charge.
(Shrubs of 288 Nos approx).For items from Sr.No. 75 to 77, minimum manpower of 1 no. ( mali ) needs to be engaged. In the absence the minimum required manpower, the amount will be deducted as per prevailing minimum wages.
610
548
334280
... More
Complete maintenance of trees, jobs like making of basin at regular interval,application of fertilizer ,cutting,trimmingetc, (excluding the cost of material required which shall be paid separately) as per direction of officer in charge.(167 trees approx)For items from Sr.No. 75 to 77, minimum manpower of 1 no. ( mali ) needs to be engaged. In the absence the minimum required manpower, the amount will be deducted as per prevailing minimum wages.
610
132
80520
... More
Supplying and stacking of good earth at site including royalty and carriage upto 5 k m lead complete (earth measured in stacks will be reduced by 20% for payment).
30
761
22830
... More
Supply of Insecticides
50
367
18350
... More
Supply of Pesticide
20
367
7340
... More
Supply of Chlorpyriphos 10% GR
40
284
11360
... More
Supply of urea
500
7
3500
... More
Supply of vermicompost
50
415
20750
... More
Supply of saplings of flowering/Fruit/shady trees like Gulmohar, Neem, Mango,Guava, Pomogranate, Orange, Lemon,Banana, Chiku, Coconut, Palm, Papita, Pine or similar type of plants etc., of 1m height as instructed by Engineer in charge.
50
59
2950
... More
Supply of saplings of seasonal/ flowering plants like pitunia , dentus, Zenia, salvia, sevanti,astar,gazania,dehlia, varieties of marigold etc or similar type of plant as instructed by Engineer in charge.
2000
7
14000
... More
Supply of seasonal/ flowering plants like kochia, pitunia , dentus, Zenia, salvia, geranium, mogra,dehlia, varieties of marigold etc or similar type of plant as instructed by Engineer in charge.
1200
30
36000
... More
Supply of permanent plants like Ficus, jaswant, pentas, Ixora,Rose, TMC Mini Tagar, Musanda, Parijaat or similar type of plant and etc as instructed by Engineer in charge.
250
47
11750
... More
Supply of croton plants like Golden Cypress, petra croton, palm,starlight, rubber palnt,christmas tree, Dracena darasingh, micro carpa ficus, chloropytum comosium, Spathiphyllum, Golden dust ,Euphorbia or similar type of plant and etc as instructed by Engineer in charge.
250
95
23750
... More
Supply of hedge plants like Golden/red duranta or similar type of plant and etc as instructed by Engineer in charge.
5000
2
11850
... More
Brooming of entire black top roads including side berms of the complex from main gate to all residential building approaches (B, C & D Type) main gate to pump house, guest house internal roads and RD Bungalow internal roads ,& parking area etc. including disposal of rubbish , waste at places as directed by engineer incharge. (Approx 10735 Sqm)
156
2145
334727.64
... More
Washing and moping of all stair cases and parking spaces of all Residential blocks with approved detergent as instructed by Engineer-In-Charge.
156
151
23601.24
... More
Door to door collection and seggregation of dry and wet grabage from residential quarters (From Ground floor to third floor All type quarters including RD,s bunglow) and dumping dry garbage at NMC pit and wet garbage in bio fertilizer pit as per instruction of Engineer-in-charge. (B type-5x 11 units,C type-4 x 11 units, D type- 2 x 6 units)
365
558
203728.4
... More
Cleaning, sweeping and moping of health club in D-1 block, clearing cob web including cleaning of windows etc complete., as per instruction of Engineer-in-charge
156
79
12394.2
... More
Cleaning, sweeping and moping of Yoga center and TT room & clearing cob web,including cleaning of windows, doors etc., as per instruction of Engineer-in-charge (Green Room occasionally)
208
187
38983.36
... More
Cleaning, sweeping and moping of tensile shed dining area and kitchen 2 No's alongwith cleaning of wall tiles ,granite counters ,cob web etc.,complete as per instruction of Engineer-in-charge.
164
130
21382.32
... More
Cleaning, sweeping and moping of badminton hall & mazanine floor, , toilet block, clearing cob web, including cleaning of windows etc., as per instruction of Engineer-in-charge
610
168
102730.1
... More
Cleaning ,removing and seggregation of food waste, party waste materials and washing of club building/yoga centre/tensile shed includes kitchen 2 No's, etc. with detergent and cleaning surrounding area up to 10 m length from the club building and dumping the waste as per instruction of Engineer-in-charge.
60
738
44326.8
... More
Cleaning, sweeping and moping of substation including cleaning of cob web as per instruction of Engineer-in-charge.
610
88
54009.4
... More
Brooming & cleaning with suitable material of roof & mumty of office building and parking including disposal of dry leaves & waste materials as instructed by Engineer-in-charge. (40 terrace blocks )Part payment shall be made for uncompleted / Unsatisfactory work in the ratio of bolcks)
24
3486
83665.92
... More
Brooming & cleaning of entire complex with disposal of leaves/plastic/ carry bags/waste paper/wrapers/waste materials/branches of trees etc outside complex confirming to the rules of Municipal Corporation complete job as per instruction of Engineer-in-charge. (All area excluding area covered in roads , garden area ,pump house, RD bungalow, School premises) (Area 15,000 Sqm) Part payment shall be made for uncompleted / Unsatisfactory work in the ref of area )
24
7944
190667.76
... More
Cleaning of storm water drains of the entire complex including removing RCC covers where ever required and resetting the same and disposal of debris, dry leaves & rubbish etc. outside complex confirming to the rules of NMC complete job as per instruction of Engineer-in-charge.
8
7533
60264.08
... More
Cleaning of school building and its premises including moping, cleaning the toilets, removing cob webs,including cleaning of windows etc. as per instruction of Engineer-Incharge
514
291
150082.86
... More
Cleaning of all type quarters at the time of shifting / other occasions including moping, cleaning the toilets, dusting of doors, windows,fans,tubelights aned removing cob web etc. complete as per instruction of Engineer-Incharge
40
377
15102
... More
Cleaning, sweeping& moping of dispensary room , DRC Room near D4 block with detergent or chemical as per instruction of Engineer-Incharge
312
42
13394.16
... More
Cleaning of premises of RD's Bunglow, brooming and disposal of rubbish as directed, including cleaning & disinfecting of toilets as per instruction of Engineer-Incharge (Excluding garden area)
730
263
192340.4
... More
Cleaning & disinfecting toilets of residential units with acid scented phenyle etc. as per instructions of Engineer-Incharge `B' type , 'C' type , 'D' type residential ( once in a week) excluding Guest house.
25480
37
948365.6
... More
Cleaning, sweeping ,moping and clearing of cob web of pump house building including brooming of entire premises of pump house as per instruction of Engineer-in-charge. (500 Sqm approx)
104
272
28388.88
... More
Cleaning of tensile shed roof at RD bungalow and near Recreation Club hall with high pressure water spray and detergent without damaging the structure as per instruction of Engineer-Incharge. High pressure water spray machine etc will be arranged by the contractor.
48
652
31333.44
... More
Brooming, Washing and deep cleaning of fountain park and open Gym along with complete cleaning and removing all stains and dust on floor tiles, wall tiles and railings with approved detergent as instructed by Engineer-In-Charge.
24
1002
24053.52
... More
Washing and cleaning of Fountain at RD Bungalow,fountain pond and fish pond at entrance along with cleaning all pumps and fittings ,sump, fountains etc completely with approved detergent as instructed by Engineer-In-Charge.
48
526
25292.64
... More
Supplying and filling in plinth with locally available sand for sludge drying beds and dressing complete.
30
2252
67560
... More
Operation & Maintenance of STP such as operation of pumps, valves of all functional units, pumping out of waste or treated water during break down of STP, cleaning of tanks, maintaining register for break down of pumps/STP, results of tests of inlet and outlet water samples, Removal, drying and spreading of sludge from drying beds to plants in the premises, entire cleaning & upkeeping of premises, chlorine dozing, Cleaning of entire STP premises daily and etc., as per the direction of EIC. (Operator should have knowledge of STP operation and Maintenance)
730
3457
2523610
... More
Supply of sodium hypochoride (10% concentration) in liquid form on monthly basis cost shall be inclusive of all jerry can, delivery at CMPDI RI-IV office, Nagpur as per instruction of EIC
730
71
51830
... More
Motor rewinding of 2 HP Kriloskar make mono block pump as per instruction of EIC
4
3293
13172
... More
Supply of bearing of 2 HP Kriloskar make mono block pump as per instruction of EIC
4
361
1444
... More
Supply of Oil seal of 2 HP Kriloskar make mono block pump as per instruction of EIC
4
202
808
... More
Lathe work of 2 HP Kriloskar make mono block pump as per instruction of EIC
2
595
1190
... More
Motor rewinding of 1 HP 3 ph submersible pump of Crompton make as per instruction of EIC
4
3763
15052
... More
Supply of Motar bush (top/bottom) of 1 HP 3 ph submersible pump of Crompton make as per instruction of EIC
4
337
1348
... More
Supply of Bearing set of 1 HP 3 ph submersible pump of Crompton make as per instruction of EIC
2
853
1706
... More
Supply of oil seal of 1 HP 3 ph submersible pump of Crompton make as per instruction of EIC
4
67
268
... More
Lathe work of 1 HP 3 ph submersible pump of Crompton make as per instruction of EIC
2
713
1426
... More
Supply of Bearing for replacement in STP blowers as per instruction of EIC
8
5288
42304
... More
Supply of oil seal in STP blowers as per instruction of EIC
2
71
142
... More
Supply and erection of fine diffuser in STP as per instruction of EIC.
5
1240
6200
... More
Motor rewinding of 5 HP blower of Crompton make as per instruction of EIC
2
5315
10630
... More
Adult mosquito control by supplying & applying K-Otherine (Deltamethrin 2.5% flow) chemical in residential B, C, D Type & non-residential buildings @ 100 ml per Quarter (average) and 200 ml per Community building unit in a dilution ratio of 10 ml per litre, 6 operations per year (As when instructed ) as per the instruction of Engineer in charge (145Unit x6 operations per year).
1740
69
120060
... More
Larva control treatment for entire complex by spreading of antilarva chemicals i.e. Temephos @ 20 ml per 10 litre water (104 operations per year, two operations per week) as per instruction of Engineer in Charge.
208
1695
352560
... More
Street fogging with heavy duty machine trolley mounted (104 operations per year, two operations per week) by spraying a mixture of Delta methrine 1.25% ULV or King Fog and diesel in the ratio of 1/2 litre chemical and 10 litres diesel for 1operation including the cost of chemical, petrol, diesel, hiring charges of vehicle for carrying the fogging machine as per instruction of the Engineer in Charge.
208
3873
805584
... More
Snake control operation to keep the snakes out from the residential & non-residential unit by way of spreading Titatox @ 1/2 kg. per block or carbolic acid in required dilution. Total 12 operation in a year (4 close interval operations during rainy season).
10
4591
45910
... More
Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters and laminated with sunmica ( 1mm to 1.5 mm thick, waterproof and termite proof)on both sides of desired colour as per instruction of Engineer in charge :30mm thick flush door.
30
2912
87379.5
... More
Removing of bee hive at CMPDI RI-IV Premisses including Materials and Labour and disposal of rubbish at places as directed etc complete as per instruction of engineer in charge.
10
2011
20118.9
... More
Labour for fixing mirror including screw etc. complete as per instruction of engineer in charge.
10
171
1716.4
... More
Labour for fixing glass/plastic shelf including screw etc. complete as per instruction of engineer in charge.
5
54
270.75
... More
Fixing of existing MS/ stainless steel curtain rods including screw etc. complete as per instruction of engineer in charge.
150
19
2968.5
... More
Removing and refixing of existing mosquito net of B,C, & D type quarters after washing and minor repairing (Without Material) if required . complete as per instruction of engineer in charge.
50
33
1651
... More
Repairing of MS windows and easy adjusting through oiling hinges/ pivots ,rubbing, straighting etc of residential quarters as required and as per instruction of EIC complete
25
74
1869.5
... More
Providing and fixing 8mm thick commercial plywood as pannel in existing wooden door including nails , screws etc. complete as per instruction of engineer in charge.
5
973
4867.45
... More
Providing and Fixing for FRP Sheet of 2.5mm thick with nut bolts, washers or self taping screws etc complete as per instruction of engineer incharge
10
645
6451.59
... More
Providing and fixing for 32mm PVC Fitting like elbow, socket , etc. complete as per instruction of engineer incharge.
30
34
1020.6
... More
Providing and Fixing CP brass shower rose of approved brand and manufacture etc. complete as per instruction of engineer incharge(150MM square/ circular)
15
1067
16011.6
... More
Providing and fixing stainless steel jet spray of Jaguar or approved equivalent brand and manufacture etc. complete as per instruction of engineer incharge.
15
765
11486.25
... More
Providing and fixing 12 mm dia bright finished anchor bolt for fixing existing wash basin etc including drilling etc. complete as per instruction of engineer incharge.
10
89
896.2
... More
Labour for removing existing washbasin and refixing at same place including making connection etc. complete as per instruction of engineer incharge.
10
95
954
... More
Providing and fixing stainless steel curtain rod bracket of approved brand including cost of nut bolts etc complete as per instruction of engineer incharge.
40
54
2186.8
... More
Repair of fully glazed door by opening of locks , alignment of hinges , fittings ,universal floor spring , etc complete as per instruction of EIC.
20
379
7588.2
... More
Providing and fixing spindle for water taps , stop cock etc of jaguar make aur equivalent including opening of taps etc . Complete as per instruction of EIC.
25
471
11784
... More
Supplying of fresh water in underground sump and as per instructed by EIC by Watertanker of Capacity 14000 ltr . (cost for per tanker of 14000ltr.)
15
2208
33134.55
... More
Providing and fixing CP brass flush cock of 25mm dia of approved quality and make including replacing of old flush cock etc . Complete as per instruction of EIC.
10
660
6606.9
... More
Repairing and realignment of rolling shutter by oiling , greasing of moving parts, springs , channels , etc. of all sizes complete as per instruction of EIC .
10
629
6294.9
... More
Repair of air / sluice valve by opening and replacing damaged parts like washers , etc & refixing the same complete without removing from pipe line as per instruction of EIC .
3
380
1142.91
... More
Dismantling existing UPVC/CPVC pipe of 15-50 mm dia and refixing after opening of the pipe on external surface including cost of damaged fittings etc. complete as per instruction of EIC.
100
115
11546
... More
Preperation of ground for outdoor sports including surface dressing upto 300mm , removing grass , debris , spreading good soil with saw dust , levelling, dressing to the required slope compaction with roller , including fabrication of supporting MS pipes for net and electric light pole watering etc. complete as per instruction of EIC. ( Rate for good soil will be paid seperately .
1000
35
35600
... More
Labour for fabrication of structural steel , MS pipes, MS angles , Tees , MS bars etc. including cost of welding ,cutting etc. complete as per instruction of EIC.
200
23
4636
... More
Labour for fixing corrugated G.S. sheet roofing including vertical surfaces fixed complete upto any pitch in horizontal/ vertical surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape and cost of nut bolts wherever required complete as per instruction of EIC.
50
124
6234.5
... More
Labour for removing existing curtains of any sizes over windows / doors for washing/cleaning with detergents/ dry cleaning etc. , ironing and refixing at the same location etc complete as per instruction of EIC.
25
49
1241
... More
Cleaning of playground by removing plastics, papers , dry leaves, waste branches of trees , pebbles , stones , broomung , levelling of small undulations etc . Complete as per instruction of EIC. (approximately 5000Sqm area)
12
976
11717.04
... More
Providing & laying Selection no. 1 doob grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with required tools wooden and than rolling the surface with light roller make the surface smoothen and light watering the same and maintenance for 30 days or more till the grass establish properly, as per direction of the officer in charge
150
94
14211
... More
Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately).
150
67
10180.5
... More
Supplying and stacking at site dump manure from approved source, including carriage upto 5 km lead complete (manure measured in stacks will be reduced by 8% for payment) :Screened through sieve of I.S. designation 20 mm
50
7019
350989
... More
Repair integrated white vitreous china cistern of capacity 10 litres with dual flushing system by replacing worn out parts including taking out & refitting ball valve with plastic float, washers, button etc.including cost of all material and labour complete of floor mounted, white vitreous china single piece, double traps syphonic water closet as per the instructions of Engineer Incharge.
10
747
7470
... More
Providing and fixing C.P. wall mixer with provision for over head shower with 115mm long bend pipe and wall flange of approved make including necessary sockets/union nut etc.complete. ( jaquar make continental (Cat.No. CON-CHR-273KNUPR)
3
5304
15912
... More
Providing and fixing Swan neck C.P Brass tap of Jaguar make or equivalent etc complete as per the instruction of EIC.
5
2195
10975
... More
Providing and fixing Fiber Reinforced Polymer (FRP) 2.5 Tons Capacity Manhole Cover of approved brand of size (900x600) complete as per instruction of EIC
10
2234
22340
... More
Providing and fixing Ready / factory made Modular FRP Shed/chhaja for windows and doors in required size and shape with required frame and filling gaps by suitable materials complete as per instruction of EIC
15
2894
43410
... More
Cleaning, sweeping and moping of Yoga center including dusting of chairs and arranging available chairs for official functions and assembling them after function complete as when required , as per instruction of Engineer-in-charge.
30
234
7048.2
... More
Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.
Group A
COST FOR 1 POINT
150
982
147300
... More
Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
125
311
38907.37
... More
Wiring for circuit/ submain wiring alongwith earth wire with the 2x2.5 sq. mm+1x2.5 sq. mm earth wire sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.
250
259
64882.14
... More
Wiring for circuit/ submain wiring alongwith earth wire with the 2x4 sq. mm+1x4 sq. mm earth wire sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.
125
311
38907.37
... More
Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 3 x 2.5 sq. mm
120
123
14835.21
... More
Supplying and drawing following sizes of FRLS PVC insulated copper conductor,single core cable in the existing surface/ recessed steel/ PVC conduit as required. 3 x 1.5 sq. mm
75
86
6510.13
... More
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
20 mm
200
125
25076.07
... More
Supply and fixing 5/6 A switch piano type switch/socket on the existing switch box/cover including connections etc. as required
50
49
2498.84
... More
Supply and fixing 15/16 A switch piano type switch/socket on the existing switch box/cover including connections etc. as required
25
113
2827.63
... More
Supply and fixing 3pin 5/6 A socket outlet piano type on the existing switch box/cover including connections etc. as required
50
64
3244.11
... More
Supply and fixing 6pin 15/16 A socket outlet piano type on the existing switch box/cover including connections etc. as required
25
127
3178.35
... More
Supply and fixing Bell push, piano type on the existing switch box/cover including connections etc. as required
25
79
1994.69
... More
Supply and fixing 5/6A switch modular switch on the existing ,modular plate & switch box including connections but excluding modular plate etc. as required.
50
97
4866.16
... More
Supply and fixing 15/16A, switch modular switch on the existing ,modular plate & switch box including connections but excluding modular plate etc. as required.
20
143
2875.86
... More
Supply and fixing 3pin 5/6A, modular socket outlet on the existing ,modular plate & switch box including connections but excluding modular plate etc. as required.
50
111
5567.59
... More
Supply and fixing 6 pin 15/16A, modular socket outlet on the existing ,modular plate & switch box including connections but excluding modular plate etc. as required.
70
179
12581.88
... More
Supply and fixing Bell push, modular on the existing ,modular plate & switch box including connections but excluding modular plate etc. as required.
15
129
1946.46
... More
Supplyong and fixing two module stepped type electrronic fan regulator on the existing modulor plate switch box including connectiond but excludi9ng modulor plate etc, as required
75
332
24922.63
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modulor socket outlet and 5/6 A modulor switych, connections etc. as required
10
407
4077.05
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 A modulor socket outlet and 15/16 A modular socket outlet and 15/16A modulor switch, connections etc. as required
50
503
25163.75
... More
Supplying and fixing 3 pin 5 A ceiling rose on the existing junction box/wooden block including connections etc as required
20
83
1665.89
... More
Supplying and fixing brass batten/angle holder including connection etc. as required.
20
124
2490.07
... More
Supply asnd fixing call bell/ buzzer suitable for single phase, 230V, compolete as required
20
92
1841.25
... More
Provbiding and fixing 100A, 30KA 4 Pole rating and braking capacity and the pole MCCB with tharmomagnetic release and terminal spreaders in existing cubical panel board including drilling holes in cubical panel, making connection etc as required
2
6802
13604.21
... More
Provbiding and fixing 200A, 36KA 4 Pole rating and braking capacity and the pole MCCB with tharmomagnetic release and terminal spreaders in existing cubical panel board including drilling holes in cubical panel, making connection etc as required
1
13367
13367.48
... More
Supply and fixing 5A to 32A rating, 240/415V, 10kA, "C" curve miniature circuit breaker suitable for inducting load of single poles iun the existying MCB DB complete with connections, testing and commissioning etc. as required.
15
234
3511.53
... More
Supply and fixing 5A to 32A rating, 240/415V, 10kA, "C" curve miniature circuit breaker suitable for inducting load of double poles iun the existying MCB DB complete with connections, testing and commissioning etc. as required.
5
584
2924.08
... More
Supply and fixing 5A to 32A rating, 240/415V, 10kA, "C" curve miniature circuit breaker suitable for inducting load of Triple pole and neutral in the existying MCB DB complete with connections, testing and commissioning etc. as required.
5
1086
5431.69
... More
Supply and fixing 25A rating, Double pole(single phase and neutral), 240V residual current circuit breaker(RCCB), having a sensitivity current 30mA in the existing MCB DB complete with connections testing and commisioni9ng etc. as required
10
1789
17895.2
... More
Supply and fixing 40A rating, Double pole(single phase and neutral), 240V residual current circuit breaker(RCCB), having a sensitivity current 30mA in the existing MCB DB complete with connections testing and commisioni9ng etc. as required
15
2328
34931.14
... More
Supplying and fixing DP sheet steel enclosure on surface/recess along with 25/32 A 240V "C" curve DP MCB complete with connections testing and commisioning etc as required.
20
1048
20972.71
... More
Supplying and fixing 20A, 240V, SPN industrial type socket outlet with 2 Pole and earth, metal enclosed plug top along with 20A "C" curve SP, MCB, in sheet steel encloser, on surafce or in recess, with chained metal cover for the socket outlet and complete with connections, testing commisioning etc. as required.
5
1530
7654.34
... More
Supply and making straight through joint with heat shrinkable kit including ferrules and other joint material for 3½ X 95 sq.mm size of PVC insulated and PVC sheathed/XLPE aluminium conductor cable of 1.1kV grade as required.
2
3193
6386.51
... More
Supply and making straight through joint with heat shrinkable kit including ferrules and other joint material for 4 X 25 sq.mm size of PVC insulated and PVC sheathed/XLPE aluminium conductor cable of 1.1kV grade as required.
3
2255
6767.91
... More
Rewinding the motor of table / pedestal / wall bracket / cabin fans of all type and makes including minor repairs lubricating of ball bearings & bush bearing, replacing condenser, screws etc. & testing for original speed and consumption with guarantee for 1 year including transportation from site and back.
5
507
2535
... More
Rewinding the motor of the ceiling fan 1200 mm / 1400 mm of all types and makes and overhauling including minor repairs lubricating of ball bearings & bush bearing, replacing condenser, screws etc. & testing for original speed and consumption with guarantee for one year.
50
552
27600
... More
Rewinding the motor of the exhaust fan 900/1400 RPM 450 mm of all types and makes and overhauling including minor repairs, lubricating of ball bearings & bush bearing, replacing condenser, screws etc. & testing for original speed and consumption with guarantee for one year
10
940
9400
... More
Rewinding of electric motor above 1 HP and upto 2 HP three phase upto 1400 RPM of all types and makes with copper wire conforming to IS 13730 : 2012, overhauling with minor repairs, lubricating of ball bearings & bush bearing, replacing screws etc. testing for the original speed and no load consumption with guarantee for one year
2
1899
3798
... More
Rewinding of electric motor above 3 HP upto 5 HP three phase upto 1400 RPM of all types and makes with copper wire confirming to IS 13730 : 2012, overhauling with minor repairs, lubricating of ball bearings & bush bearing, replacing screws etc. testing for the original speed and no load consumption with guarantee for one year
2
3674
7348
... More
Rewinding of electric motor above 15 HP upto 20 HP three phase upto 1400 RPM of all types and makes with copper wire confirming to IS 13730 : 2012, overhauling with minor repairs, lubricating of ball bearings & bush bearing, replacing screws etc. testing for the original speed and no load consumption with guarantee for one year
2
8215
16430
... More
Rewinding of submersible pump motor in borewell of all types and makes up to and including 5 HP with coated copper wire conforming to IS 13730 : 2012, overhauling with minor repairs, lubricating of ball bearings & bush bearing, replacing screws etc. testing for the original speed, H.P. and no load consumption & guarantee for one year.
3
1850
5550
... More
Rewinding of submersible pump motor in borewell of all types and makes above 5 HP up to 25 HP with coated copper wire conforming to IS 13730: 2012, overhauling with minor repairs, lubricating of ball bearings & bush bearing, replacing screws etc. testing for the original speed, H.P. and no load consumption & guarantee for one year.
1
2067
2067
... More
Replacing the existing driving end bearing of original make for electric motor AC single phase / three phase 12.5 HP to 20 HP of all types with required alignment of the shaft and testing the same.
4
1483
5932
... More
Replacing the existing driving end bearing of original make for electric motor AC single phase / three phase 3 HP to 7.5 HP of all types with required alignment of the shaft and testing the same..
2
589
1178
... More
Replacing the existing non driving end bearing of original make for electric motor AC single phase / three phase 12.5 HP to 20 HP of all types with required alignment of the shaft and testing the same.
4
988
3952
... More
Replacing the existing non driving end bearing of original make for electric motor AC single phase / three phase 3 HP to 7.5 HP of all types with required alignment of the shaft and testing the same.
2
492
984
... More
Filtration of transformer oil conforming to IS 1886 : 2000 on site till satisfactory test results.
350
36
12600
... More
Supplying and topping up new insulating oil for transformer conforming to IS 335 :1993 of approved make with test certificate.
250
144
36000
... More
Supplying and replacing thermal overload relay for motor starter suitable for up to 12.5 HP.
4
1127
4508
... More
Supplying and replacing thermal overload relay for motor starter 20 HP to 25 HP
2
1453
2906
... More
Supplying & replacing contactor for DOL motor starter from 7.5 HP to 10 HP.
2
1323
2646
... More
Supplying & replacing contactor for star-delta motor starter from 15 HP to 25 HP.
1
2631
2631
... More
Supplying and erecting integrated LED flood light fitting Max. 155W IP65 & IK07 class having pressure die-cast aluminium housing, having system lumens output of Min. 18600 Lumens, min. efficacy of 120 lumen/W, CRI70, CCT upto 6500K, THD0.90, operating range of 140-270V, inbuilt surge protection of 4 kV, Life class of 50,000 Hrs at L70B50 including driver with U shaped bracke
16
10357
165712
... More
Supplying and erecting integrated LED street light fitting 100-110W IP65 & IK08 class having single piece pressure die-cast aluminium housing, having system lumens output of Min. 11000 Lumens, min. efficacy of 110 lumen/W, CRI70, CCT upto 6500K, THD0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs at L70B50 including driver complete with minimum 2 Years warranty as per specification No. FG
30
7315
219450
... More
Supplying and erecting integrated LED street light fitting 40 to 50W IP65 & IK08 class having single piece pressure die-cast aluminium housing, having system lumens output of Min. 4400 Lumens, min. efficacy of 110 lumen/W, CRI70, CCT upto 6500K,THD0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs at L70B50 including driver complete with minimum 2 Years warranty as per specification No. FG
15
4223
63345
... More
Supplying and erecting LED square / circular Max. 7W down lighter / Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 770 Lumens, min. efficacy of 110 lumen/W, CRI80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs at L70B50 including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with minimum 2 years warranty as per specification No. FG-IDF/LED.
20
664
13280
... More
Supplying and erecting LED square / circular Max. 11 W down lighter/Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 1200 Lumens, min. efficacy of 110 lumen/W, CRI80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs at L70B50 including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with minimum 2 years warranty as per specification No. FG-IDF/LED.
15
807
12105
... More
Supplying & erecting ready to use Retrofit T8 LED, 18 / 20 watt tube light with polycarbonate body, heat sink, integrated HF electronic driver complete & compatible to T8 / T12 LED luminaire by disconnecting starter & ballast if necessary as per specification No. FG-LP/RET.
75
663
49725
... More
Supplying & erecting 5W-7W, 230V integral type LED Lamp suitable for B22/E-27 base as per specif
20
147
2940
... More
Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable, 1100 V 3½ core 50 sq. mm. aluminium conductor complete erected with glands & lugs on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL
100
386
38600
... More
Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable, 1100 V 3½ core 70 sq. mm. aluminium conductor complete erected with glands & lugs on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL
100
499
49900
... More
Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable, 1100 V 4 core 16 sq. mm. aluminium conductor complete erected with glands & lugs on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL
150
215
32250
... More
Work for Up-keeping & Maintenance of Electrical Installation (HT<) at CMPDI RI-IV, Nagpur Office cum residential complex ( workrs to be engaged for up-keep of residence and township One Skilled and Two Semi-skilled workers) As per direction of Engineer incharge.
730
3103
2265576.9
... More
Office Work ITC Available:Carriage of material by mechanical transport including loading, unloading and stacking upto 5 kms. Lime, moorum, building rubbish
30
252
7566.6
... More
Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth, lead upto 50m and for all lift , as directed by engineer in charge . All kinds of soil
10
136
1369.5
... More
Filling available excavated earth (excluding rock) in trenches, plinth sides of foundations etc. in layers not exceeding 20 cm in depth; consolidating Each deposited layer by ramming and watering lead upto 50m and for all lift
10
153
1534
... More
Structural steel work in single section fixed with or without connecting plate including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
300
103
30945
... More
Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
40
1064
42582
... More
Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red, Brown laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigment etc., complete
40
949
37996
... More
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08%and conforming to IS : 15622 , of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete.
40
1332
53302
... More
Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete
100
211
21130
... More
Applying priming coats with primer of approved brand and manufacture having low VOC (volatile Organic Compound) content , content with Water thinnable cement primer on wall surface having VOC content less than 50 gram/ litre.
100
58
5835
... More
Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Two coats.
100
107
10780
... More
Distempering with 1st quality acrylic distemper(ready mix) having VOC less than 50gms/litre of approved brand and manufacture to give an even shade. Old work (one or more coats)
100
47
4775
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge.External work 25 mm nominal outer dia .Pipes
50
325
16255
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge.External work 40 mm nominal outer dia .Pipes
30
503
15096
... More
Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. All kinds of soil
100
26
2685
... More
Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.
15
869
13035.75
... More
Providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, upto 25metre height, above ground level, including additional rows of scaffolding in stepped manner as per requirement of site,made with 40mm dia M.S. tube, placed 1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock system with M.S. Tubes, M.S. tube challis, M.S. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and/ or pointing and/ or applying chemical and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of Engineer-in-charge. Note:- (1) The elevational area of thescaffolding shall be measured for payment purpose. (2) The payment will be made once only for execution of all items for such works.
90
265
23859
... More
Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross “T” of size 24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main ’T’ at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross ‘T’ of length 600 mm and size 24 x28 mm made of 0.33 mm thick 600 mm panel to from grid of size 600x600 mm, resting on periphery walls /partitions on a Perimeter wall angle pre coated steel of size(24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges caliCum silicate ceiling tiles of approved texture in the grid, including, cutting/ making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. Main ‘T’ runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm centre to centre along main ‘T’, bottom exposed with 24 mm of all Tsections shall be pre-painted with polyster baked paint, for all heights, as per specifications, drawings and as directed by Engineer-in-Charge. Note :- Only calcium silicate false ceiling area will be measured from wall to wall. No deduction shall be made for exposed frames/opening (cut outs) having area less than 0.30 sqm.The calcium silicate ceiling tile shall have NRC value of 0.50 (Minimum), light reflection 85%, non- combustible as per B.S. 476 part IV, 100% humidity resistance and also having thermal conductivity 0.043 w/mK.
20
1645
32912
... More
Cleaning of under ground sump, Over Head R.C.C. Tank (independent staging) including disposal of slit and rubbish, all as per direction of Engineer-in-Charge. The cleaning shall consist following operations:- (i) Tank shall be emptied of water by pumping & bottom shall be cleaned of slit and other deposits.(ii) Entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water. (iii) Chlorination of RCC internal surface by liquid chlorine. (280 sqm approx)
8
5645
45160
... More
Hiring Charges for JCB/Loader/ Excavator including cost of operator diesel etc for using the machine for excavating, levelling, trenching, loading and etc complete as per instruction of EIC
20
1173
23460
... More
Providing and fixing 18 mm thick plywood shelf on wooden brackets in cupboards and other area as per direction of EIC
10
1325
13250
... More
Cleaning of chokes/Jams in wash basins, nahni traps by choke remover/hand pump or by manually including cost of all tools & plants required to clear the choke including removing the debris at places as directed by Engineer-Incharge
40
100
4000
... More
Opening traps, water pipes and refitting for cleaning chokes/blockages in wash basins,metropole, waste lines, trap door etc. The rate shall be inclusive of tools & plants required to open and refixing in position etc. complete
50
173
8650
... More
Cleaning blockages etc. in WC pans, traps and connected soil waste pipe etc. complete to the satisfaction of Engineer Incharge
20
196
3920
... More
Cleaning blockages in gully trap chambers of waste water from washroom using poking rods, bamboo laths etc.
10
100
1000
... More
Cleaning blockages chokes in sewer lines, chamber etc. (Chamber with sewer line upto 15m on either sides)
10
1003
10030
... More
Repairing leakages/drippings in water taps, stop cocks, bib cocks, pillar cocks, waste pipes of wash basins etc.Replacing Washers
30
64
1920
... More
Repairing leakages/drippings in water taps, stop cocks, bib cocks, pillar cocks, and waste pipes of wash basins etc.Replacing spindles with washers
20
155
3100
... More
Repairing leakages/drippings in water taps, stop cocks, bib cocks, pillar cocks, metropole, waste pipes of wash basins etc.Without using any material. Only by opening, cleaning and refixing.
20
50
1000
... More
Providing and fixing half turn CPVC ball valve of approved quality : 25 mm dia nominal bore
4
368
1472
... More
Providing and fixing half turn CPVC ball valve of approved quality : 40 mm dia nominal bore
4
908
3632
... More
Complete maintenance of the entire garden features having as per yard stick in the garden area i.e. lawn trees, shrubs, herbs, hedges, flower beds, foliages, creepers etc. including hoeing,weeding, pruning,cutting,trimming, replacement of plants, gap filling, watering, mowing of lawn, grass cutting by lawn mover and brush cutter, removal of garden waste, applying insecticide, pesticide & fertilizers (whenever required) top dressing of lawn with good earth and manure and maintenance of other garden related works as directed by office-in-charge (Cost of Good Earth, Manure, Fertilizer, Insecticide, Pesticide will be provided by the Department & lawn mover and brush cutter with fuel and other T & P material/articles shall be provided by the contractor.) and as per direction of officer in charge.For items from Sr.No. 16 to 19, minimum manpower of 6 no.s ( mali ) needs to be engaged. In the absence the minimum required manpower, the amount will be deducted as per prevailing minimum wages.
(Garden Areas of about 10500 sqm approx)
610
1123
685030
... More
Complete maintenance of shrubs (outside garden features), jobs like making of basin at regular interval,application of fertilizer etc, (excluding the cost of material which shall be paid separately) and as per direction of officer in charge.
(Shrubs of 1687 Nos approx).For items from Sr.No. 16 to 19, minimum manpower of 6 no.s ( mali ) needs to be engaged. In the absence the minimum required manpower, the amount will be deducted as per prevailing minimum wages.
610
3208
1956880
... More
Complete maintenance of trees, jobs like making of basin at regular interval,application of fertilizer ,cutting,trimmingetc, (excluding the cost of material required which shall be paid separately) as per direction of officer in charge.(60 trees approx)For items from Sr.No. 16 to 19, minimum manpower of 6 no.s ( mali ) needs to be engaged. In the absence the minimum required manpower, the amount will be deducted as per prevailing minimum wages.
610
228
139080
... More
Maintenance of earthen potted plants in displayed at multi storied office buildings,flats and ground floor bungalow,office complex including application of good earth, manure, insecticide, pesticide and fertilizer, removing of dry
parts by pruning, cleaning dry leaves and displaying in appropriate place and replacement of broken pots coloring of pots and change of location of pots and replacing with fresh plants as and when required ( Materials provided by the department) as per direction of officer in charge (For Earthen pot 342 nos)For items from Sr.No. 16 to 19, minimum manpower of 6 no.s ( mali ) needs to be engaged. In the absence the minimum required manpower, the amount will be deducted as per prevailing minimum wages.
610
1301
793610
... More
Supplying and stacking of good earth at site including royalty and carriage upto 5 k m lead complete (earth measured in stacks will be reduced by 20% for payment).
100
761
76100
... More
Supply of Insecticides
50
367
18350
... More
Supply of Pesticide
20
367
7340
... More
Supply of Chlorpyriphos 10% GR
40
284
11360
... More
Supply of urea
500
7
3500
... More
Supply of vermicompost
10
415
4150
... More
Supply of saplings of flowering/Fruit/shady trees like Gulmohar, Neem, Mango,Guava, Pomogranate, Orange, Lemon,Banana, Chiku, Coconut, Palm, Papita, Pine or similar type of plants etc., of 1m height as instructed by Engineer in charge.
50
59
2950
... More
Supply of saplings of seasonal/ flowering plants like pitunia , dentus, Zenia, salvia, sevanti,astar,gazania,dehlia, varieties of marigold etc or similar type of plant as instructed by Engineer in charge.
2000
7
14000
... More
Supply of seasonal/ flowering plants like kochia, pitunia , dentus, Zenia, salvia, geranium, mogra,dehlia, varieties of marigold etc or similar type of plant as instructed by Engineer in charge.
2000
30
60000
... More
Supply of permanent plants like Ficus, jaswant, pentas, Ixora,Rose, TMC Mini Tagar, Musanda, Parijaat or similar type of plant and etc as instructed by Engineer in charge.
80
47
3760
... More
Supply of croton plants like Golden Cypress, petra croton, palm,starlight, rubber palnt,christmas tree, Dracena darasingh, micro carpa ficus, chloropytum comosium, Spathiphyllum, Golden dust, Euphorbia or similar type of plant and etc as instructed by Engineer in charge.
50
95
4750
... More
Supply of hedge plants like Golden/red duranta or similar type of plant and etc as instructed by Engineer in charge.
6000
2
14220
... More
Brooming of entire cement roads around the new office building including parking area etc. including disposal of rubbish , waste at places as directed by engineer incharge. (Approx 2500 sqm))
312
441
137592
... More
Brooming & cleaning by approved material of roof & mumty of office building and parking including disposal of dry leaves & waste materials as instructed by Engineer-in-charge.
24
938
22521.6
... More
Daily cleaning & disinfecting toilets of office building with harpic or equivalent bathroom cleaner, scented phenyle etc. as per instructions of Engineer-Incharge.(28 No. of toilets)
610
713
434930
... More
Deep cleaning of toilets of office building including cleaning of wall tiles ,floor tiles, fittings and fixtures completely, removing all stains with harpic or equivalent toilet cleaner,removing cob webs, refilling handwash(500ml approx), naphtalene balls, toilet paper etc. whenever required as per instructions of Engineer-Incharge .(28 No. of toiltes)
24
5787
138888
... More
Cleaning, sweeping & moping all office rooms, common area,terrace area & balconies in Each floor, table, chairs, lift, stairs & entrance of new office building, Security post, Driver's Room etc. as per instruction of Engineer-in-charge. (4100 approx sqm)
610
2545
1552450
... More
Cleaning, sweeping and moping of Transformer House, Pump House near office & DRC Room Near D-4 residential Block building etc. including cleaning of cob web as per instruction of Engineer-in-charge.
104
278
28982.72
... More
Cleaning of glass/ laminated partitions and doors on both sides with approved cleaning material and removing all cob webs as per instruction of Engineer-Incharge CMPDIL office complex partitions(2500 sqm approx)
24
2667
64008
... More
Cleaning of all ceiling fans and tubelights in all office rooms etc. complete as per instruction of Engineer-Incharge (180 fans,112 tubelights)
8
3964
31712
... More
Cleaning of all glass windows in 5 storey office building from inside and outside etc. complete as per instruction of Engineer-Incharge (1132 sqm approx)
8
21304
170432
... More
Supplying and filling in plinth with locally available sand for sludge drying beds and dressing complete.
20
2252
45040
... More
Operation & Maintenance of STP such as operation of pumps, valves of all functional units, pumping out of waste or treated water during break down of STP, backwashing,cleaning of tanks, maintaining register for break down of pumps/STP, results of tests of inlet and outlet water samples, Removal, drying and spreading of sludge from drying beds to plants in the premises, entire cleaning & upkeeping of premises, chlorine dozing, Cleaning of entire STP premises daily and etc., as per the direction of EIC. (Operator should have knowledge of STP operation and Maintenance)
730
1185
865050
... More
Supply of sodium hypochoride (99% concentration) in liquid form on monthly basis cost shall be inclusive of all jerry can, delivery at CMPDI RI-IV office, Nagpur as per instruction of EIC
150
71
10650
... More
Supply of Hydrochloric acid (HCl, pH 2-3, 33% concentration) on monthly basis cost shall be inclusive of all jerry can, delivery at CMPDI RI-IV office, Nagpur as per instruction of EIC
300
26
7800
... More
Supply of caustic soda(pH 11-12) on monthly basis cost shall be inclusive of all jerry can, delivery at CMPDI RI-IV office, Nagpur as per instruction of EIC
150
101
15150
... More
Adult mosquito control by supplying & applying K-Otherine (Deltamethrin 2.5% flow) chemical in non-residential buildings @ 2 ltr for complete office building in a dilution ratio of 10 ml per litre, 6 operations per year as per the instruction of Engineer in charge.(total 11 Unit)
12
6876
82512
... More
Street fogging with heavy duty machine trolley mounted by spraying a mixture of Delta methrine 1.25% ULV or King Fog and diesel in the ratio of 1/2 litre chemical and 10 litres diesel for 1operation including the cost of chemical, petrol, diesel, hiring charges of vehicle for carrying the fogging machine as per instruction of the Engineer in Charge.
208
938
195104
... More
Cleaning of all chairs and sofas available in office premises with vacuum cleaner, removing all stains and dust by approved material etc complete as per instruction of Engineer-Incharge CMPDIL.(Twice a year)
4
7226
28904
... More
Providing and Replacing of 9 volt urinal sensor of ultra-life lithium battery in Sensor based urinal Complete as per instruction of EIC.
88
1527
134410.32
... More
Providing and installing urinal censor of approved quality and Jaguar make (code SNR-STL-51083) with mini concealed type flushing valve complete set with installation box , battery operated ultra life 9 volt lithium based, after removing damaged censor . The censor shall carry the warranty as per manufacturers terms and conditions etc complete as per instructions of engineer incharge.
3
10831
32494.08
... More
Supplying and stacking at site dump manure from approved source,including carriage upto 5 km lead complete (manure measured in stackswill be reduced by 8% for payment) : Screened through sieve of I.S. designation 20 mm
50
294
14700
... More
Providing & laying Selection no. 1 doob grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with required tools wooden and than rolling the surface with light roller make the surface smoothen and light watering the same maintenance for
30 days or more till the grass establish properly,as per direction of officer in charge
500
94
47370
... More
Cleaning, sweeping and moping of Murpar sub camp office, including clearing cob web , cleaning of windows etc complete., as per instruction of Engineer-in-charge
610
79
48464.5
... More
Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
50
311
15562.95
... More
Wiring for circuit/ submain wiring alongwith earth wire with the 2x2.5 sq. mm+1x2.5 sq. mm earth wire sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.
75
259
19464.64
... More
Wiring for circuit/ submain wiring alongwith earth wire with the 2x4 sq. mm+1x4 sq. mm earth wire sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.
50
311
15562.95
... More
Supplying and drawing following sizes of FRLS PVC insulated copper conductor,
single core cable in the existing surface/ recessed steel/ PVC conduit as required.
3 x 2.5 sq. mm
75
123
9272.01
... More
Supplying and drawing following sizes of FRLS PVC insulated copper conductor,
single core cable in the existing surface/ recessed steel/ PVC conduit as required.
3 x 1.5 sq. mm
50
86
4340.09
... More
Supplying and fixing of following sizes of medium class PVC conduit along with
accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
20 mm
100
125
12538.04
... More
Supply and fixing 5/6A switch modular switch on the existing ,modular plate & switch box including connections but excluding modular plate etc. as required.
50
97
4866.16
... More
Supply and fixing 15/16A, switch modular switch on the existing ,modular plate & switch box including connections but excluding modular plate etc. as required.
20
143
2875.86
... More
Supply and fixing 3pin 5/6A, modular socket outlet on the existing ,modular plate & switch box including connections but excluding modular plate etc. as required.
50
111
5567.59
... More
Supply and fixing 6 pin 15/16A, modular socket outlet on the existing ,modular plate & switch box including connections but excluding modular plate etc. as required.
50
179
8987.05
... More
Supply and fixing Bell push, modular on the existing ,modular plate & switch box including connections but excluding modular plate etc. as required.
15
129
1946.46
... More
Supplyong and fixing two module stepped type electrronic fan regulator on the existing modulor plate switch box including connectiond but excludi9ng modulor plate etc, as required
75
332
24922.63
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modulor socket outlet and 5/6 A modulor switych, connections etc. as required
10
407
4077.05
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 A modulor socket outlet and 15/16 A modular socket outlet and 15/16A modulor switch, connections etc. as required
10
503
5032.75
... More
Supplying and fixing 3 pin 5 A ceiling rose on the existing junction box/wooden block including connections etc as required
20
83
1665.89
... More
Supplying and fixing brass batten/angle holder including connection etc. as required.
20
124
2490.07
... More
Supply asnd fixing call bell/ buzzer suitable for single phase, 230V, compolete as required
20
92
1841.25
... More
Provbiding and fixing 100A, 30KA 4 Pole rating and braking capacity and the pole MCCB with tharmomagnetic release and terminal spreaders in existing cubical panel board including drilling holes in cubical panel, making connection etc as required
2
6802
13604.21
... More
Provbiding and fixing 200A, 36KA 4 Pole rating and braking capacity and the pole MCCB with tharmomagnetic release and terminal spreaders in existing cubical panel board including drilling holes in cubical panel, making connection etc as required
1
13367
13367.48
... More
Supply and fixing 5A to 32A rating, 240/415V, 10kA, "C" curve miniature circuit breaker suitable for inducting load of single poles iun the existying MCB DB complete with connections, testing and commissioning etc. as required.
15
234
3511.53
... More
Supply and fixing 5A to 32A rating, 240/415V, 10kA, "C" curve miniature circuit breaker suitable for inducting load of double poles iun the existying MCB DB complete with connections, testing and commissioning etc. as required.
5
584
2924.08
... More
Supply and fixing 5A to 32A rating, 240/415V, 10kA, "C" curve miniature circuit breaker suitable for inducting load of Triple pole and neutral in the existying MCB DB complete with connections, testing and commissioning etc. as required.
5
1086
5431.69
... More
Supply and fixing 40A rating, four pole(three phase and neutral), 415V residual current circuit breaker(RCCB), having a sensitivity current 30mA in the existing MCB DB complete with connections testing and commisioning etc. as required
10
2813
28136.05
... More
Supplying and fixing DP sheet steel enclosure on surface/recess along with 25/32 A 240V "C" curve DP MCB complete with connections testing and commisioning etc as required.
5
1048
5243.18
... More
Supplying and fixing 20A, 240V, SPN industrial type socket outlet with 2 Pole and earth, metal enclosed plug top along with 20A "C" curve SP, MCB, in sheet steel encloser, on surafce or in recess, with chained metal cover for the socket outlet and complete with connections, testing commisioning etc. as required.
5
1530
7654.34
... More
Supply and making straight through joint with heat shrinkable kit including ferrules and other joint material for 3½ X 95 sq.mm size of PVC insulated and PVC sheathed/XLPE aluminium conductor cable of 1.1kV grade as required.
2
3193
6386.51
... More
Rewinding the motor of the ceiling fan 1200 mm / 1400 mm of all types and makes and overhauling including minor repairs lubricating of ball bearings & bush bearing, replacing condenser, screws etc. & testing for original speed and consumption with guarantee for one year.
50
552
27600
... More
Rewinding the motor of the exhaust fan 900/1400 RPM 450 mm of all types and makes and overhauling including minor repairs, lubricating of ball bearings & bush bearing, replacing condenser, screws etc. & testing for original speed and consumption with guarantee for one year
15
940
14100
... More
Rewinding of electric motor above 1 HP and upto 2 HP three phase upto 1400 RPM of all types and makes with copper wire conforming to IS 13730 : 2012, overhauling with minor repairs, lubricating of ball bearings & bush bearing, replacing screws etc. testing for the original speed and no load consumption with guarantee for one year
2
1899
3798
... More
Rewinding of electric motor above 3 HP upto 5 HP three phase upto 1400 RPM of all types and makes with copper wire confirming to IS 13730 : 2012, overhauling with minor repairs, lubricating of ball bearings & bush bearing, replacing screws etc. testing for the original speed and no load consumption with guarantee for one year
2
3674
7348
... More
Rewinding of electric motor above 15 HP upto 20 HP three phase upto 1400 RPM of all types and makes with copper wire confirming to IS 13730 : 2012, overhauling with minor repairs, lubricating of ball bearings & bush bearing, replacing screws etc. testing for the original speed and no load consumption with guarantee for one year
2
8215
16430
... More
Rewinding of submersible pump motor in borewell of all types and makes up to and including 5 HP with coated copper wire conforming to IS 13730 : 2012, overhauling with minor repairs, lubricating of ball bearings & bush bearing, replacing screws etc. testing for the original speed, H.P. and no load consumption & guarantee for one year.
2
1850
3700
... More
Rewinding of submersible pump motor in borewell of all types and makes above 5 HP up to 25 HP with coated copper wire conforming to IS 13730: 2012, overhauling with minor repairs, lubricating of ball bearings & bush bearing, replacing screws etc. testing for the original speed, H.P. and no load consumption & guarantee for one year.
1
2067
2067
... More
Replacing the existing driving end bearing of original make for electric motor AC single phase / three phase 12.5 HP to 20 HP of all types with required alignment of the shaft and testing the same.
4
1483
5932
... More
Replacing the existing non driving end bearing of original make for electric motor AC single phase / three phase 12.5 HP to 20 HP of all types with required alignment of the shaft and testing the same.
2
988
1976
... More
Filtration of transformer oil conforming to IS 1886 : 2000 on site till satisfactory test results.
600
36
21600
... More
Supplying and topping up new insulating oil for transformer conforming to IS 335 :1993 of approved make with test certificate.
500
144
72000
... More
Supplying and replacing thermal overload relay for motor starter suitable for up to 12.5 HP.
4
1127
4508
... More
Supplying and replacing thermal overload relay for motor starter 20 HP to 25 HP
2
1453
2906
... More
Supplying & replacing contactor for DOL motor starter from 7.5 HP to 10 HP.
2
1323
2646
... More
Supplying & replacing contactor for star-delta motor starter from 15 HP to 25 HP.
1
2631
2631
... More
Supplying and erecting integrated LED flood light fitting Max. 155W IP65 & IK07 class having pressure die-cast aluminium housing, having system lumens output of Min. 18600 Lumens, min. efficacy of 120 lumen/W, CRI70, CCT upto 6500K, THD0.90, operating range of 140-270V, inbuilt surge protection of 4 kV, Life class of 50,000 Hrs at L70B50 including driver with U shaped bracke
8
10357
82856
... More
Supplying and erecting integrated LED street light fitting 100-110W IP65 & IK08 class having single piece pressure die-cast aluminium housing, having system lumens output of Min. 11000 Lumens, min. efficacy of 110 lumen/W, CRI70, CCT upto 6500K, THD0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs at L70B50 including driver complete with minimum 2 Years warranty as per specification No. FG
10
7315
73150
... More
Supplying and erecting LED square / circular Max. 7W down lighter / Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 770 Lumens, min. efficacy of 110 lumen/W, CRI80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs at L70B50 including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with minimum 2 years warranty as per specification No. FG-IDF/LED.
40
664
26560
... More
Supplying and erecting LED square / circular Max. 11 W down lighter/Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 1200 Lumens, min. efficacy of 110 lumen/W, CRI80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs at L70B50 including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with minimum 2 years warranty as per specification No. FG-IDF/LED.
25
807
20175
... More
Supplying & erecting ready to use Retrofit T8 LED, 18 / 20 watt tube light with polycarbonate body, heat sink, integrated HF electronic driver complete & compatible to T8 / T12 LED luminaire by disconnecting starter & ballast if necessary as per specification No. FG-LP/RET.
20
663
13260
... More
Supplying & erecting 5W-7W, 230V integral type LED Lamp suitable for B22/E-27 base as per specif
20
147
2940
... More
Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable, 1100 V 3½ core 70 sq. mm. aluminium conductor complete erected with glands & lugs on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL
50
499
24950
... More
Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable, 1100 V 4 core 16 sq. mm. aluminium conductor complete erected with glands & lugs on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL
150
215
32250
... More
Work for Up-keeping & Maintenance of Electrical Installation (HT<) at CMPDI RI-IV, Nagpur Office cum residential complex ( workrs to be engaged for up-keep of residence and township One Skilled and Two Semi-skilled workers) As per direction of Engineer incharge.
730
3103
2265576.9
... More
Total impact of GST for the purpose of CTC
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%