Bridge And Roof Company India Limited Tender

Supplying and applying COATING (Post-erection/ Field) of approved quality and shade as per Sl. No. 9.2.1 of Table 9.2 of EIL Specification No. B378-000-02-42-PCS-0001, Rev.2 (or as per Job Specifications, wherever applicable) for painting over the coat of shop primer & galvanisation already applied, including storage, surface preparation, degreasing, cleaning, drying, providing necessary arrangement for access, testing etc. including touching up of shop primer coat, for LADDERS, SPIRAL STAIRWAYS & HAND RAILS at all location & levels, all complete as specified. SUPPLY OF ALL MATERIAL IN CONTRACTOR'S SCOPE. (Unit rate based on weight of steel).

Painting of MS Chequered Plates

PAINTING (STRUCTURAL STEEL) :- Supply of paints/primers, preparing the surface for painting (SSPC-SP-10) and applying pre-erection/shop primer (1 coat of F-9 @ 65-75 micron DFT) as per EIL Specification No. B378-000-02-42-PCS-0001, Rev.2 (or as per Job Specification, wherever applicable) on fabricated structural steel (at fabrication shop/yard located outside plant boundary), providing labour, material, equipment, machineries, tools and tackles, consumables supervision etc. to complete the work in all respects as per EIL painting spec, drawings and direction of Engineer-in-Charge. SUPPLY OF ALL MATERIAL IN CONTRACTOR'S SCOPE.

Painting of Hand Railing 1000mm

Supply of paints/primers, surface preparation and applying shop primer (1 coat of P6 of 40 micron) as per Sl. No. 9.2.1 of Table 9.2 of EIL Specification No. B378-000-02-42-PCS-0001, Rev.2 (or as per Job Specifications, wherever applicable), etc. all complete as specified, shown and directed. (SUPPLY OF ALL MATERIALS IN CONTRACTOR'S SCOPE). (Complete handrail work shall be measured as length of top rail only and not length of each element fixed).

Painting of Hand Railing 500mm

Supply of paints/primers, surface preparation and applying shop primer (1 coat of P6 of 40 micron) as per Sl. No. 9.2.1 of Table 9.2 of EIL Specification No. B378-000-02-42-PCS-0001, Rev.2 (or as per Job Specifications, wherever applicable), etc. all complete as specified, shown and directed. (SUPPLY OF ALL MATERIALS IN CONTRACTOR'S SCOPE). (Complete handrail work shall be measured as length of top rail only and not length of each element fixed).

PAINTING :- Supply of paints and primers, preparation of surfaces and application of primer and finish paints, identification (Line numbering), lettering, colour bands, colour coding etc. as specified including rubdown and touch up of shop primer wherever required, providing scaffolding for all heights, labour, material, tools and tackles, consumables supervision etc. to complete the work in all respects as per EIL Std spec. B378-000-02-42-PCS-0001, Rev.2 (6-79-0020), drawings and direction of Engineer-in-Charge for all types of un insulated piping and insulated piping as specified including all pipes, fittings, flanges, supports, valves etc.Surface preparation by blast cleaning and application of first coat of primer (inorganic zinc silicate, F9) shall be done in fabrication yard prior to erection. The identification marks of the piping and joints shall be noted before blasting and the same shall be transferred on primed surface with Polyurethane paint (F2) or as per the instructions of Engineer-in-Charge. Notes: 1. All joints (fabrication as well as erection joints) shall be left unpainted till hydro testing. 2. No extra payment shall be made for identification (line numbering etc.) of insulated and uninsulated lines.

Painting of uninsulated surfaces for ' Highly Corrosive ' environment as per EIL Spec No. B378-000-02-42-PCS-0001, Rev.2 (6-79-0020) for CS piping for design temp group: -14 to 80 (Deg C) including surface preparation. For following pipe sizes

Dia 4 Inch

Dia 6 Inch

Painting of uninsulated surfaces for ' Highly Corrosive ' environment as per EIL Spec No.B378-000-02-42-PCS-0001, Rev.2 (6-79-0020) for CS piping for design temp group: -14 to 80 (Deg C) including surface preparation. For following valve sizes

Dia 4 Inch

Dia 6 Inch

"NOTE:- THE ABOVE RATE SHALL BE INCLUSIVE OF ALL TAXES & DUTIES, ROYALTIES, CESS, FEE, ENVIORMENTAL & POLLUTION, FITNESS & SAFETY CLEARANCE CHARGES (IF ANY), OR ANY OTHER INCIDENTAL CHARGES ETC BUT EXCLUDING GST."