Automotive Research Association Of India Tender
... More
Search from over 12139+ business opportunities that have been announced from the biggest Mahatenders, e tender Maharashtra, Maharashtra government tenders, and the Online Tender Notices posted on Maharashtra e tenders till date. Find opportunities that have come in from the multiple corporations, Maharashtra government departments, State PSUs, and Private companies from the state.
Automotive Research Association Of India - ARAI Tender
Civil And Construction
Eprocure
Opening Date2 Apr 2024
Closing Date6 May 2024
Tender AmountRefer Documents
Costs
EMD
₹ 5,00,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Construction And Other Allied Works For Establishment Of High Energy Impact Test
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_ARAI_802774_1Bid Award Id
ViewTender No
ID-1911-PR-60003267Tender Authority
Automotive Research Association Of India ViewPurchaser Address
-Website
http://https://www.araiindia.com/home
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
All kinds of soil.
-
11670
-
... More
Earth work in Excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto ARAI Premises, disposed earth to be levelled and neatly dressed and compacted etc. complete,
-
-
-
... More
All kinds of Soil & Ordinary rock
-
-
-
... More
a) Depth not exceeding 0 to 1.5 m.
-
449
-
... More
b) for Depth from 1.5m to 3m but not exceeding 3m.
-
449
-
... More
Hard Rock (Blasting Prohibited)
-
-
-
... More
a) Depth not exceeding 0 to 1.5 m.
-
377
-
... More
b) For depth 1.5m to 3m , but not exceeding 3.0m.
-
754
-
... More
c) For depth 3m to 4.5m , but not exceeding 4.5 m.
-
126
-
... More
Excavating in All Kinds of Soil and Ordinary Rock, Trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within ARAI Premises.
-
-
-
... More
All kinds of soil and Ordinary Rock
-
-
-
... More
Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia.
-
145
-
... More
Pipes, cables etc. exceeding 300 mm dia but not exceeding 600 mm.
-
110
-
... More
Excavating in All Kinds of Soil and Ordinary Rock, Trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth exceeding 1.5 m, but not exceeding 3 m. including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within ARAI Premises.
-
-
-
... More
Pipes, cables etc. exceeding 300 mm dia but not exceeding 600 mm.
-
5
-
... More
Excavating Trenches in HARD ROCK of required width for pipes, cables, etc, including excavation for sockets, depth upto 1.5 m including getting out the excavated materials, returning the soil as required in layers not exceeding 20 cm in depth including consolidating each deposited layers by ramming, watering etc. stacking serviceable material for measurements and disposal of unserviceable material as directed, within ARAI Premises.
-
-
-
... More
Hard Rock (Blasting Prohibited)
-
-
-
... More
Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia.
-
10
-
... More
Pipes, cables exceeding 300 mm dia but not exceeding 600mm dia
-
10
-
... More
Excavating Trenches in HARD ROCK of required width for pipes, cables, etc, including excavation for sockets, depth exceeding 1.5m but not exceeding 3 m including getting out the excavated materials, returning the soil as required in layers not exceeding 20 cm in depth including consolidating each deposited layers by ramming, watering etc. stacking serviceable material for measurements and disposal of unserviceable material as directed, within ARAI Premises.
-
-
-
... More
Hard Rock (Blasting Prohibited)
-
-
-
... More
Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia.
-
5
-
... More
Pipes, cables etc. exceeding 300 mm dia but not exceeding 600mm dia.
-
5
-
... More
Filling with Available Approved Excavated Earth for trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, compacting using mechanical means as approved by engineer in-charge in order to achieve 95% of proctor density (for any lead and any lift inside the ARAI Premises ). Maximum size of boulder to be 150mm.
-
233
-
... More
Filling in plinth / space around foundations/ trenches, under floors, etc. with selected and approved Murum made available by Excavating the area assigned by EIC or murum available in dumping area within ARAI Premises, in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering including transporting, loading & unloading, stacking , consolidating using appropriate mechanical device ,as directed , and dressing complete etc. complete as directed by Engineer in Charge in order to achieve 95% of proctor density ( (for any lead and any lift inside the ARAI Premises). Maximum size of boulder to be 150mm.
-
16058
-
... More
Supplying and Filling in plinth / space around foundations/ trenches etc. with selected and approved Murum Brought from outside under floors, in trenches , in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering including, stacking , consolidating using appropriate mechanical device ,as directed , and dressing complete including any lead and any lift etc. complete as directed by Engineer in Charge in order to achieve 95% of proctor density (for any lead and any lift ). The Royalty payment and its documentation is to be included in the rate. Maximum size of boulder to be 150mm.
-
50
-
... More
Providing Excavator (like JCB etc) with Bucket on Hourly basis for the work as directed by Engineer -in-charge. (The rate should include Operator, Helper, Fuel, Maintenance, Transportation & any other statutory requirements etc.)
-
30
-
... More
Providing Dumper with on Hourly basis for the work as directed by Engineer -in-charge. (The rate should include Diver, Helper, Fuel, Maintenance, Transportation & any other statutory requirements etc.)
-
10
-
... More
TOTAL FOR EARTHWORK & EXCAVATION
-
-
-
... More
SOLING AND FLOORING
-
-
-
... More
Providing & applying pre-construction Anti-Termite Treatment, as per IS 6313 latest revision, with minimum 10 years guarantee under foundations, floor including required peripheral area upto 1m/2m width outside plinth for various buildings as specified and directed ,including Work at all Levels, and depths, using latest approved chemicals etc. complete. Measurement Records for treated area together with Photos and warranty papers are Mandatory and measurement will be based only on Plinth Area of each building / structure .
-
327
-
... More
Providing total upto 300mm thk. Hard Core filling over the compacted plinth filling , in compacted layers of 150mm each, including, laying, spreading and compacting mix of Graded crushed Stone aggregate of 63mm to 22.4mm, including spreading, and filling with requisite type of screening / binding material to fill up interstices of coarse aggregates, watering and compacting to required density of minimum, by using appropriate compaction equipment etc. complete.
-
1689
-
... More
Providing & laying 250 micron LDPE sheet over the prepared subgrade above including joining by necessary tape overlapping as directed etc. complete.
-
327
-
... More
Providing and laying in position in M15 grade PCC as per required thickness as specified in floor bedding using graded metal washed sand, including formwork, if necessary and laying in alternate panels, if required, including consolidation, watering, curing etc. complete
-
25
-
... More
Providing & laying 75mm to 200mm. thick of M25 grade Reinforced Concrete in Flooring , including provision of expansion and contraction joints, dowel bars, concreting in panels and strips, junctions with / without columns, compacting with vibrating boom, power floating as specified on drawings / instructions. (Excluding reinforcement), but including form work using steel channels, curing by ponding etc. complete,
-
56
-
... More
Extra over above said item of floor concrete, for Vacuum Dewatering and Towelling treatment such as " Tremix " treatment, including curing etc. complete,
-
277
-
... More
Extra over above said item of floor concrete, for providing and spreading or mixing , Floor Hardener of Sika Make " Chapdur " @ 6kg/Sqm., or any other equivalent hardener approved by Engineer in Charge ,before final trowel finish, as per manufacturer's requirements, etc. complete,
-
277
-
... More
5mm x 20mm deep Groove cutting at 4m. c/c and filling with single component Sika flex pro-3 or Approved Chemical sealant including deep cleaning etc. complete.
-
133
-
... More
Providing & fixing MS Dowel Bars 20mm. dia x 900mm. Long at 300/750mm.c/c, half length of dowel bar in to be covered during concreting by using PVC sleeve & End Plug, etc. complete.
-
1
-
... More
Providing & fixing in position required thk. of Foam Base Board of supreme or equivalent quality at various joints such as isolation, construction joints at wall edge, and column junctions with provision of Baker Rod and sealing with Winsil-20 neutral base sealant manufactured by GE Silicon, Or equivalent make, as per manufacturer's requirements ,etc. complete,
-
-
-
... More
12mm thick
-
5
-
... More
Extra over above said item of floor concrete, for providing and spreading or mixing, Floor Densifyer of Ashford formula @ 5 Sqm/L., or any other equivalent Densifyer approved by Engineer in Charge, as per manufacturer's requirements, etc. complete,
-
5
-
... More
TOTAL FOR SOLING & FLOORING
-
-
-
... More
CONCRETE WORK
-
-
-
... More
Providing and laying in position Cement Concrete of specified grade including the cost of centering and shuttering, propping etc. and removal of formwork for : - All work up to plinth level :
-
-
-
... More
1:2:4 M15 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) for Foundations, Footings, Bases of Columns, etc. for Mass Concrete.
-
102
-
... More
Providing and laying Cement Concrete in steps and the like at or near ground level including cost of centering and shuttering including strutting, propping etc. and removal of formwork.
1: 1 1/2 :3 M20 (1 Cement : 1 1/2 coarse sand : 3 graded stone aggregate 20 mm nominal size).
-
2
-
... More
Making Plinth Protection width of 1m/1.5m, including 50mm thick of cement concrete 1:3:6 including 75mm bed by dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top in broom finish, curing by ponding etc. complete.
-
108
-
... More
TOTAL FOR CONCRETE WORK
-
-
-
... More
REINFORCED CEMENT CONCRETE
-
-
-
... More
Providing and laying in position Concrete for Reinforced Concrete work , manufactured by machine batched, machine mixed and machine vibrated at site and /or Ready mixed concrete manufactured in fully automatic batching plant having continuous agitated mixer, and transported to site of work , in transit mixer, including pumping of concrete to desired location, design mix cement concrete of specified grade, using natural sand and /or crushed sand of approved quality ,including cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability, including use of reactive fly ash / cementitious materials, of approved grade as per the provisions of relevant I.S. Codes and as approved by the Engineer- in- Charge ,including the cost of water tight centering, shuttering propping , staging , keeping provision for cutouts in Slabs & walls as per drawing, finishing at all levels including grinding of joints to achieve level surfaces including ceilings . M-25grade reinforced cement concrete by using cement content as required for Strength , Durability , and workability etc. as required by the relevant codes. Rate to include cost of trial mixes design and required testing etc. complete. Shuttering material should be in New Ply for all Foundations, Slabs, Beams, Columns etc. Placing of Sleeves for services PVC/ MS will be in contractors scope as per drawing, in all levels and at all positions. Contractor should arrange for cover concrete block of same grade of concrete as the structural concrete member.
-
-
-
... More
All work Up to Plinth Level, including Retaining Walls, Pardies of Water Tanks, Foundations, Columns , Machine and Equipment Foundations, Trenches, plinth beams etc. Including hacking , curing etc. complete.
-
242
-
... More
Reinforced Cement Concrete work Above Plinth level in Columns, Beams, Slabs, Walls (any thickness), Walls of water tanks, lift wells, including attached pilasters, parapet walls, buttresses, plinth and string courses, fillets, pillars, piers, abutments, posts and struts, suspended floors, roofs having slope up to 15° landings, balconies, shelves, cantilevered chajjas, lintels, bands, plain window sills, Staircases and spiral stair cases, kerbs, steps, and Machine Foundations, Trenches etc., including hacking, curing, etc. complete,
-
173
-
... More
EXTRA OVER above said basic item of M25 Concrete , For change of Grade from M25 to M30
-
412
-
... More
TOTAL FOR REINFORCED CONCRETE WORK
-
-
-
... More
STEEL REINFORCEMENT
-
-
-
... More
Providing , placing and tying in position , Reinforcement for R.C.C. work including straightening, cutting, bending, binding wire (16g), placing in position and binding, Testing costs , Wastage costs ,etc.all complete, up to plinth level and above plinth level at all heights. Reinforcement used in structure shall be free of rust.
-
-
-
... More
Thermo-Mechanically Treated bars of FE 500/550 D Grade .
-
39
-
... More
TOTAL FOR STEEL REINFORCEMENT
-
-
-
... More
BRICK WORK
-
-
-
... More
FLY ASH BRICK
-
-
-
... More
Brick Work, at all heights, with Non modular sized, Machine made Fly Ash Bricks with minimum 10% Cement , confirming to I.S. 12894-2002 , of class designation 7.5, ( 75 kgf/sq cm ), for any wall thickness from 150 to 450 mm , with fly ash confirming to I.S.3812-1981, in Foundation and upto Plinth in including curing etc. complete.
Cement mortar 1:6 (1 cement : 6 coarse sand)
-
4
-
... More
Brick Work with Non modular sized ,Machine made Fly Ash Bricks with minimum 10% Cement , confirming to I.S. 12894-2002, of class designation 7.5, ( 75 kgf/sq cm ), for wall thickness from 150 to 450 mm, with fly ash confirming to I.S.3812-1981, in Superstructure at all heights , including curing etc. complete.
Cement mortar 1:6 (1 cement : 6 coarse sand)
-
39
-
... More
STONE WORK
-
-
-
... More
Providing and laying in position, Uncoursed Rubble Masonry (UCR) in Cement Mortar with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size)including placing horizontal header stones headers of 150x 150 mm of required length to cover 90% of wall width at every 2.5m cross centres and vertical keys of stones of minimum 300mm length, at every 900 c/c .
Cement mortar 1:6 (1 cement : 6 coarse sand) including placing of pvc pipes as weep holes as required by design ( cost of PVC pipe is paid separately ) , curing etc. complete.
-
223
-
... More
Providing & applying Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand)
Finishing the UCR wall surface with Sunk Pointing
-
370
-
... More
Providing and laying in position , Plum Concrete wall as plinth wall and or retaining wall, along plot boundary, above and or below ground, with height of wall in the approximate range of 0 to 7m, depending upon local ground condition, including fixing and removing formwork ,including required staging , using approximately 60% stones and 40% mortar, including layer wise placing of approved hard stones as rubble of max 200 mm size and placing of mortar of grade M15 concrete with maximum size of aggregates as 12mm, over and in between the stones , by manual ways or through concrete pump to cover all stone faces ,including rodding etc. to achieve compacted homogeneous mass without any pockets or honey combs , including placing horizontal header stones or precast concrete headers of 150x 150 mm M15 grade, of required length to cover 90% of wall width at every 2.5m cross centres and vertical keys of stones of minimum 300mm length, at every 900 c/c , including placing of pvc pipes as weep holes as required by design ( cost of PVC pipe is paid separately ) , curing etc. complete.( cost of all work including form work ,staging , concrete etc. is to be included in the rate )
-
10
-
... More
Plum Concrete wall with all specifications same as above but using Stones Available from excavation including cutting the rock boulders or pieces to required to size and shape , including cost of labour , scaffolds etc. complete. (Size of Rubble between 200mm max)
-
3
-
... More
TOTAL FOR MASONARY WORK
-
-
-
... More
DOORS AND WINDOWS - to be check after finalisation of Architectural Drw.
-
-
-
... More
STEEL DOORS
-
-
-
... More
Providing and fixing in position,Two Hour Fire Rating Steel Doors ( Shakti Hormann- Door make or Equivalent make ) - in Approved Colour, with Dorma / Hormann or Equivalent make Fittings, with Mini. Two Hour Fire Rating, single / double leaf MS galvanized doors of the type size & leafs as mentioned below, with door frame and fixing one layer of intumescent strip 30x2mm thick to shutter & all accessories complete all as per drawing details including and confirming to IS 3614 (PART 2) 1992 BS476 (PART 20 & 22) and ISO834, including mortar fill in main frame.
1: Frame (size 143 x 57mm, (18 g) 1.20mm thick, galvanized steel sheet formed to single Rebate profile, welded type, to be fixed on plastered openings with the help of 8mm Expansion Anchor Fasteners and grout),
2: Shutter : Constructed from 0.80mm Thick Galvanized Steel Sheet formed to provide a 46mm thick fully flush, double skin door shell with Lock Seam joints at stile edges. Infill of Honeycomb Kraft Paper is used to give the required rigidity and effective acoustic and thermal insulation 3: Vision glass : Where specified only, Each shutter should have a vision glass of required size with 5mm thick clear toughened glass to all doors and frosted glass to toilet entrance doors. 4: FINISH : The doorframes and door shutters are finished with Thermosetting Polyurethane paint of Aliphatic Grade providing high levels of scratch resistance and durability. 5: Fittings & Fixtures :- HINGES : Stainless Steel Ball Bearing Butt Hinges 3mm thick fixed flush to the frame and shutter ( Profile 101x89x3mm thick ).
-
-
-
... More
Mortise Sash Locks : Mortise sash lock ( ml 100 a ) with internal thumb turn & external key operation cylinder (external trim) with ss lever handles.
SS 'D' handles : ss 'd' handle 254 mm (with rose)
ss push plate ( 150 x 300 mm ) with sticker of "Pull & Push"
Door Closers : Standard Heavy Duty Self Closing Door Closer - Parelal / Standard arm Concealed Flush Bolt :- 600 mm long ( for doors 2201 - 2500 mm ), including providing and fixing panic bar for fire exits, with sticker Fire exit as per door schedule.
Seals: seal for air tightness(Indian) , etc. complete.
All Fitting of Dorma / Hormann make or equivalent. Providing & filling filing between Frame and wall with liquid foam material in contractors scope.
-
-
-
... More
D-1/1.2mx 2.4m/2.5m, Single Shutter, Door with vision panel 200 wide x 600mm high .
-
9
-
... More
Supplying and fixing Electrically Operated DIRECT DRIVE Motorised Rolling Shutters as per IS 6248 , of approved make, such as Gandhi Automation, Crawford, Hormaan or equivalent , made of laths with size min. 80 mm x 1.20mm. thick including provision of 600 mm grill /perforation if required, Single Skin Galvalume , Colour Coated with approved colour , interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, with rolled formed min. 2mm thick ,side guides and arrangements for inside and outside locking , including EPDM rubber seal at bottom as weather seal , including top cover of 1.20mm. thickness for rolling shutters, including provision of Safety Edge mechanism for reversing motion in case of any obstruction in the path , including Self breaking Worm Gears , Integrated limit switches, Safety Brakes and Overload protection , Push button key selector , Manual over ride option incase of power failure , including IP 54 protection rate , and designed for wind pressure of Min. 150 kgs/sqm , and with operating torque of min. 400 NM etc. complete.
Supplier Drw. to be provided and approved by Engineer In Charge. etc Completed.
-
-
-
... More
Rolling Shutter - Appox - 4.5mX4.5m
-
61
-
... More
ALUMINIUM DOORS & WINDOWS
-
-
-
... More
Providing and fixing Aluminium Work ( 16 gauge 3/4" heavy Jindal section series )with ivory or black or any other approved shade Polyester powder coated aluminium for various items like doors, windows, ventilators and partitions, louvered windows etc. with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, metered and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings, including Aluminium Subframes (0.93 kg per meter ) made from yellow zinc chromotized Section as per drawing details, including Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. This doors to be compulsorily Pivot type.
All Fitting of Dorma or equivalent make
-
-
-
... More
Providing and fixing in position powder coated aluminium section Three Track Sliding window mounted on rectangular frame as per drawing details ( 16 gauge 3/4" heavy Jindal section series ) and handle selected quality 5.5mm thick Plain glass ( Saint Gobain ) to be fixed in shutter with neoprene gasket with approved quality PVC rollers necessary locks, handles, pvc lining, filling joints by sealants and wooden encasement if required wherever necessary etc. Complete as directed by Engineer In charge, Two Glass shutters and one shutter with GI Mosquito Mesh, etc. complete. Powder Coated with colour approved by ARAI.
-
-
-
... More
W -Sliding Windows , approximate size 1500 X 1500 / 1800 / 2100
-
30
-
... More
TOTAL FOR DOOR & WINDOWS
-
-
-
... More
STRUCTURAL STEEL WORK
-
-
-
... More
Fabricating and Erecting in place Structural Steel Work using Rolled or Built up sections or angles, or channels , for Roof trusses , Purlins, Gantry Girders, Monorails , Columns , Cleats , Brackets , etc. all Structural steel works, including Preparing shop drawings, obtaining consultant's approval, supplying, fabricating, delivering at site, hoisting and fixing in position including all temporary staging and supporting work and , in accordance with the design, drawings prepared by the consultants. the rate of steel work shall include assembly, welding, jointing, building up new sections using plates / rolled section, cost of fasteners , nuts, bolts of 8.8 gradeand washers, pre-heating the sections to temperatures up to 250ºC if thickness of the section is equal to or more than 25mm.and fabrication out of the following types of structural steel material with connections using plates, channels and angles, gusset plate, connection bolts, cleats, fasteners etc. as per drawing, steel conforming to IS:226 and IS:2062-Gr.A with minimum yield strength as indicated below , including one coat of primer and two coats of Approved shade of synthetic enamel paint , in all levels and at all positions etc. all complete,(Fasteners, welding electrodes, consumables will not be paid separately. Rates inclusive of necessary tests of materials and welds as per Indian Standards and technical specifications).
-
-
-
... More
For Industrial Shed Rolled Sectionsand Plates of Grade YST 250 Mpa
-
25
-
... More
Other Purpose Using Rolled Sectionsand Plates of Grade YST 250 Mpa
-
2
-
... More
Providing , Fabricating , Erecting, aligning , in required position, Miscellaneous Items of Structural steel using mild steel , and weighing individually not more than 3000 kgs , such as Platforms, Ladders , Angles with hold fasts, various sizes Insert plates with Hold fasts , Railings using M S Tubes , Stools and frames , suspenders for false ceiling and frames for trap doors , Manholes , brackets for cable trays and pipes , etc. as directed by the engineer, including cutting , grinding , welding , painting with primer and two coats synthetic enamel paint ,cleaning etc. complete ,including any shop drawing if so required.
-
1
-
... More
Providing & fixing in position holding down bolts / Foundation Bolts (GRADE 8.8) in concrete or masonry of various diameters ranging from 12mm. to 50mm. including nuts, washers, sleeves, approx. length upto 1.6mtr. etc. as per drawings including supply and fixing templates, supports, setting out etc. complete as specified and directed (templates and supports will not be measured and paid separately).
-
1
-
... More
Providing and fixing in position M.S. Grill to all level windows, as per the working drawing to be given , including fabrication , fixing in position around the window with approved fasteners ,painting with two coats of red oxide primer and two coats of synthetic enamel paint at all heights etc. complete, weight of grill approximately 20 kg per sqm.
-
30
-
... More
TOTAL FOR STRUCTURAL STEEL WORK
-
-
-
... More
FLOORING
-
-
-
... More
Providing and laying approved quality polished Granite Stone 18 mm thick for Staircase Treads/Risers/landing/Flooring Skirting etc.as directed on a bed of 1:4 cement mortar including cement float, filling joints with neat cement slurry curing, polishing cleaning etc. complete with chamfer moulding with three grooves and polishing of edges.
( Basic rate Rs.2000/- per Sqm delivered at site including loading / unloading without GST)
-
20
-
... More
Providing & Fixing Granite 18 mm thick ,mirror polished , in Window Sills with edge Chamfer & edge polishing, laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete, using single length of 1.5m meter. (Basic Rate Rs 2000 / Sqm delivered at site including loading/unloading without GST).
-
26
-
... More
Providing and Fixing Granite 18 mm thick for Granite Cladding, mirror polished for lift wall at entrance with edge rounding and edge polishing, laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete, including Clamps & pins for anchoring with wall including applying rough coat of fine sand and Araldite /Equivalent approved .
(Basic Rate Rs 2000 / Sqm delivered at site including loading/unloading without GST).
-
10
-
... More
TOTAL FOR FLOORING
-
-
-
... More
ROOFING
-
-
-
... More
Providing and fixing Pre Painted GI Roofing & Cladding Sheet : Providing and fixing precoated galvalume profile sheets (size, shape and pitch of corrugation as approved by EIC). 0.50mm +/- 5% total coated thickness (TCT). Zinc coating 120gsm as per IS 277 in 240mpa steel grade, 5-7 micron epoxy primer on both sides of the sheets and polyster top coat 15-18 micron of approved shade. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length of 12mtr or as desired by EIC. The sheets shall be fixed using self drilling of self tapping screws of size 5.5 X 55 mm with EPDM seal or with polymer coated J or L hooks, bolts and nuts 8mm dia. with bitumen and GI limpet washers or with GI limpet washer filled with white lead complete upto any pitch in horizontal or vertical or curved surfaces excluding the cost of purlins, Rafters and trusses and including cutting to size and shape wherever required including overlaps as required as per IS specification including any scaffolding, loading and unloading, leakproofing etc. complete (Material as per approved makes mentioned in tender document).
-
416
-
... More
Providing & Fixing in position Double Skin Roof with Galvalume colour coated TRAPIZOIDAL profile sheet with subtle square fluting factory cut at all heights for roof complete in all respect. TOP SHEET-The end rib shall be designed for anti-capillary action. The feed material should be manufactured out of nominal 0.45 mm Base Metal Thickness (BMT), Histrength steel with min. 550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% Aluminium, 43.5% Zinc &1.5% Si) as per AS 1397 - Zincalume AZ150 (Min. 150 gms/sq.mt total on both sides) with quality paint coat as per AS/NZS 2728 type 3-4. The paint shall have a total coating thickness of nominal 25 μm, comprising of nominal 15 μm exterior RMP coat on top surface and nominal 5 μm reverse backer coat on back surface over nominal 5 μm primer coat on both surfaces of approved colour shade IN RiBZAC 1020 Profile. Total Coated Thickness (TCT) should be 0.50mm. Total Painted Thickness (TPT) should be in addition to 0.50mm. The steel sheet shall be fastened with nominal 40 μm zinc coated or nominal 25 μm zinc-tin alloy coated, Hex head, self-drilling screw as per AS 3566-2002 Class 3 fasteners of HP, CORROSHIELD make with EPDM washer as per the requirement considering the profile shape and design load. The fastener size shall be calculated as per the design or manufacturers recommendations. The profile sheet, fastener size etc. shall be approved by the Engineer. The sheeting should be with up to 100mm lap & waterproof with Silicon sealant nonhardening neutral cure type shall be applied at all end laps, complete as directed Z-Sub Girt - roll formed section 40x50x40x1.50 TCT, 120GSM Galvanized, Rock Wool Insulation with 50mm with 48 kg/m3 density in between 2 sheets. LINER SHEET-bare Galvalume roofing sheet of Panel Rib profile as having micro rib overall in the profile sheet. The feed material is of manufactured out of nominal 0.45 mm Base Metal Thickness (BMT) with 0.50 mm TCT. Color Coated of PPGL, Hi-strength steel with 550 MPa yield strength, metallic hot dip coated with AZ 150 GSM, passivated & resin coated. The feed material should have coil manufacturer’s product details marked at regular interval for confirming genuinity of the material. Complete as per the directions of the engineer. The steel manufacturer's test certificate for the chemical & mechanical properties of steel must be submitted for approval prior to installation.
-
350
-
... More
Providing & Fixing in position Double Skin Cladding with Galvalume colour coated TRAPIZOIDAL profile sheet with subtle square fluting factory cut at all heights for side & Gable cladding complete in all respect. OUTER SHEET-The end rib shall be designed for anti-capillary action. The feed material should be manufactured out of nominal 0.45 mm Base Metal Thickness (BMT), Histrength steel with min. 550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% Aluminium, 43.5% Zinc &1.5% Si) as per AS 1397 - Zincalume AZ150 (Min. 150 gms/sq.mt total on both sides) with quality paint coat as per AS/NZS 2728 type 3-4. The paint shall have a total coating thickness of nominal 25 μm, comprising of nominal 15 μm exterior RMP coat on top surface and nominal 5 μm reverse backer coat on back surface over nominal 5 μm primer coat on both surfaces of approved color shade IN RiBZAC 1020 Profile. Total Coated Thickness (TCT) should be 0.50mm. Total Painted Thickness (TPT) should be in addition to 0.50mm. The steel sheet shall be fastened with nominal 40 μm zinc coated or nominal 25 μm zinc-tin alloy coated, Hex head, self-drilling screw as per AS 3566-2002 Class 3 fasteners of HP, CORROSHIELD make with EPDM washer as per the requirement considering the profile shape and design load. The fastener size shall be calculated as per the design or manufacturers recommendations. The profile sheet, fastener size etc. shall be approved by the Engineer. The sheeting should be with up to 100mm lap & waterproof with Silicon sealant nonhardening neutral cure type shall be applied at all end laps, complete as directed Z-Sub Girt - roll formed section 40x50x40x1.50 TCT, 120GSM Galvanized, Rock Wool Insulation with 50mm with 48 kg/m3 density in between 2 sheets. LINER SHEET-bare Galvalume cladding sheet of Panel Rib profile as having micro rib overall in the profile sheet. The feed material is of manufactured out of nominal 0.45 mm Base Metal Thickness (BMT) with 0.50 mm TCT. Colour Coated of PPGL, Hi-strength steel with 550 MPa yield strength, metallic hot dip coated with AZ 150 GSM, passivated & resin coated. The feed material should have coil manufacturer’s product details marked at regular interval for confirming genuinity of the material. Complete as per the directions of the engineer. The steel manufacturer's test certificate for the chemical & mechanical properties of steel must be submitted for approval prior to installation.
-
288
-
... More
Providing & fixing Flashing in position with 0.50 mm TCT AZ 150 GSM,PPGL with approved shape and size with machine sharing and bending in PPGL with silicon seleants and SDS required etc.complete (Upto 600 mm Girth)
-
98
-
... More
Providing & fixing Flashing in position with 0.50 mm TCT AZ 150 GSM,PPGL with approved shape and size with machine sharing and bending in PPGL with silicon seleants and SDS required etc.complete (Upto 1000 mm Girth)
-
10
-
... More
Providing & Fixing in position with 2 mm thk.GI Gutter along with END cap (GI 2.0mm) butt Jointer(GI2.0 mm),Down spout (0.50 PPGL) Seleant,bytel tape required etc complete.
-
52
-
... More
Providing & Fixing in position single walled Polycarbonate Transperent Roofing or Cladding sheet of min. 2 mm thick with matching to selected profile or roofing/cladding sheets including laps, fixtures like self drilling self tapping screw with EPDM washers, including stitching/sealing using approved seleant as required to make water tight installation etc complete.
-
29
-
... More
Providing and fixing in position Natural Ventilation Exhausts (Turbovent) of approved make , of 600mm dia throat size ,in anodized aluminium casing, fully water proof , with design discharge capacity of min.2000 cub m./hour at wind speed of 8km/hr , over roofing using matching Corrugated aluminium profiled sheet as base, including vortex blades of Industrial grade aluminium 0.5mm thick,with minimum 42 vens , with Turbine shaft, bracings , bearing housing etc. in SS 304, including maintainance free Ball beraings double shielded Deep Grove, with whole assembly micro balanced to avoid viberations ,and designed to sustain wind speeds of 140 kmph ,and able to operate at minimum wind speeds of 3 km/hr, including fixtures like self drilling self tapping screws with EPDM washers including stitching as required in complete line and level , and closing all the gaps using apprpriate sealing material and coving to ensure water tight installation, with minimum 10 years warranty etc. complete
-
8
-
... More
Providing and fixing on wall face Unplasticised Rigid PVC Rain Water Pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.(i) Single socketed pipes, including Synthetic Enamel Painting matching to building theme.etc. complete.. Item including of all PVC Moulded Fittings/ Accessories required as per site condition like Coupler,Scocket, Pain Bend/Plug Bend, Y, Shoe, Plain Tee/Plug Tee, Cowl, with G.I U-Clamp with each 1M etc complete.
-
-
-
... More
165 MM diameter (Pressure 6kg/CM2)
-
60
-
... More
100 MM diameter (Pressure 6kg/CM2)
-
-
-
... More
Providing and fixing to the inlet Mouth of Rain Water Pipe cast iron grating 15 cm diameter and weighing not less than 440 grams. etc. complete.
-
6
-
... More
TOTAL FOR ROOFING
-
-
-
... More
PLASTERING & PAINTING
-
-
-
... More
All Plastering in Natural Sand, Scaffolding, Cleaning, Finishing and Curing, required at all heights and levels.
-
-
-
... More
Providing & applying, in single coat, Internal Cement Plaster,Smooth finished , min.15mm thick, to rough side of wall, or RCC , in cement mortar 1:4, ( 1Cement : 4 fine natural sand) , to concrete, fly ash Block / brick surface, on walls in all levels and at all positions, on joints, and corners rounded off, Fibre Mesh including H Frame/cup lock scaffolding & curing etc. complete, giving smooth finish . The Finished Surface to be approved by Engineer in charge .
-
157
-
... More
Providing & applying ,External Cement Plaster min.18 mm thk, at all heights, in two coats, under layer min. 12 mm thick cement plaster 1:5 (1 cement: 5 natural coarse sand) and a top layer min. 6mm thick cement plaster 1:3 (1 cement: 3 natural fine/coarse sand) finished with uniform grain structure as per approved sample , using mechanical drum type plaster throwing equipment ( Dabba Plaster ) , to concrete, fly ash Block / brick surface, on walls in all levels and at all positions with Fibre Mesh & water proofing compound of KEM PLAST 74 , SIKACIM PINK OR equivalent including H Frame/cup lock ,drip mould as required, including edge strip smoothening at corners,including any coving required over chajjas, including scaffolding, at all levels & curing etc. complete.
-
476
-
... More
Providing & applying , 6 mm Cement Plaster 1:3 (1 cement: 3 coarse natural sand), At all levels, smooth finished over RCC soffit, beams & ceiling etc Completed
-
10
-
... More
PAINTING
-
-
-
... More
All Painting Rates to including Providing, Mixing Supplying, Scaffolding, Cleaning of Surfaces, Finishing and any Curing required, at all heights and levels.
-
-
-
... More
INTERIOR FINISHING
-
-
-
... More
Providing & Applying 1st Quality Acrylic Washable Distemper (ready mixed) of approved manufacturer and of required shade and colour complete. as per manufacturer's specification, using Asian or equivalent make, including base preparation by cleaning, 2 coats putty & filling of cracks with crack sealing compound of approved make , priming etc. as per standard specifications of CPWD, including watering, curing, H Frame/cup lock scaffolding at all height etc. complete. Two or more coats with primer & 2 coats putty on new work.
-
104
-
... More
Providing & Applying Painting with Synthetic Enamel Paint (Internal) Mat Finished of approved brand and manufacture to give an even shade : Two or more coats on new work ,including base preparation by cleaning, 2 coats putty & filling of cracks with crack sealing compound of approved make , priming etc. as per standard specifications of CPWD, , including watering, scaffolding at all levels etc. complete. (internal finishing).
-
54
-
... More
EXTERIOR FINISHING
-
-
-
... More
Finishing walls with Water Proofing Cement Paint of required shade using Asian or equivalent make, including base preparation by cleaning, priming etc. as per standard specifications of CPWD, including watering, curing, H Frame/cup lock scaffolding at all levels etc. complete. New work (Two or more coats) applied at 3.84 kg/10 sqm
-
10
-
... More
Finishing walls with 100% Premium Acrylic Smooth Exterior Paint with Silicone additives of required shade using Asian or equivalent make, of any approved shade ,including base preparation by cleaning, priming with acrylic primer , crack filling with approved material , etc. as per standard specifications of CPWD, including watering, scaffolding at all levels etc. complete. New work (Two or more coats applied min. @ Min. 1.43 ltr/ 10 sqm. over and including base coat acrylic primer applied.@ Min. 2.20 kg/ 10 sqm). To obtain uniform appearance as directed by The Engineer in Charge, etc. complete.
-
476
-
... More
Painting (two or more coats) on rain water, soil, waste and vent Pipes and fittings with Synthetic Enamel paint of approved brand and manufacture and required colour over a priming coat of approved steel primer on new work. - up to 200 mm diameter pipes.
-
60
-
... More
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied min. @0.90 ltr/10 sqm over an under coat of primer applied min. @ 0.80 ltr/ 10 sqm of approved brand or manufacture.
-
100
-
... More
TOTAL FOR PLASTERING & FINISHING
-
-
-
... More
INTERNAL SANITARY, WATER SUPPLY & DRAINAGE WITH EXTERNAL SEWAGE SYSTEM
-
-
-
... More
Providing and constructing masonry Inspection Chamber for depth above 1000 mm & upto 2000 mm in 450 mm thick conventional brick masonry in C.M. 1:6,including excavation up to required depth in all kind of strata, 100 mm thick 1:3:6 P.C.C. bedding, plaster in C.M. 1:4 from inside & outside surfaces with smooth cement plaster rendering on the internal surface, haunches, channels, air tight lid with Composite Resin Manhole Cover with Frame of Fibrocast, KK & Equivalent brand, Extra Heavy Duty - D400 conforming to relevant EN- 124 Specifications. (Inspection shall beas per guidelines of IS Specification) with lifting & placing arrangement fixed in cement Concrete 1:2:4 etc Completed.
-
-
-
... More
600 mm x 450 mm
-
27
-
... More
RCC HUME PIPE
-
-
-
... More
Providing, laying and jointing RCC Hume Pipe with Spigot and rubber ring, of NP 3 class with all specials below ground level at all depths including cutting, jointing with hemp yarn & C.M.1:1 and testing including excavation up to the required level & refilling, cleaning compaction etc. complete excluding excavation in hard rock.
-
-
-
... More
450 mm dia.
-
245
-
... More
INTERNAL SANITARY,WATER SUPPLY & DRAINAGE WITH EXTERNAL SEWAGE SYSTEM
-
-
-
... More
DRAINAGE
-
-
-
... More
TOTAL FOR DRAINAGE
-
-
-
... More
WATERPROOFING
-
-
-
... More
Providing and laying in position Waterproof Plaster min 20mm thk, in C.M:1:3 to vertical and horizontal ,inside faces of overhead or underground Water storage tanks, Rain water Gutters ,reverberation chamber at any level , including proper hacking of concrete /plastered surface ,including approved proofing compound conforming to IS :2645 and approved by the Engineer, including curing ,etc. complete.
-
44
-
... More
TOTAL FOR WATERPROOFING
-
-
-
... More
DISMANTLING & DEMOLISHING
-
-
-
... More
Making Core Cuts in RC members using high speed core cutting machine cleaning disposal of unserviceable material within lead upto ARAI Premises etc completed as per direction of Engineer - in -charge.
-
-
-
... More
Up to 150 dia , and 300mm length
-
10
-
... More
From 160mm to 250mm, 350mm length
-
10
-
... More
Making Core Cuts in wall with Brick work /plaster etc. using high speed core cutting machine cleaning disposal of unserviceable material within lead upto ARAI Premises etc completed as per direction of Engineer - in -charge.
-
-
-
... More
Up to 150 dia , and 300mm length
-
5
-
... More
From 160mm to 250mm, 350mm length
-
5
-
... More
TOTAL FOR DISMANTLING & DEMOLISHING
-
-
-
... More
MISCELLANEOUS WORKS
-
-
-
... More
Providing and laying 300 mm dia.Half Round Concrete pipes in 1:3;6 cement concrete bedding in required line and level including filling the joints with cement, curing etc complete.
-
5
-
... More
Providing & laying at all heights and depths approved Non-Shrink Grout ( Sika) under equipment / column base plates, foundations, etc. including chipping the concrete surface, cleaning, laying, finishing the surfaces smooth, curing, etc. complete as specified and directed.
-
1
-
... More
Providing and fixing,16 g., SS 304 Railing with SS 304 Branded Hand Rail manufactured by D line or Jaguar or equivalent consisting of one top rail 40mm dia. ( S.S. ) and four pipes below of 25mm dia. (S.S.) including closing both end, approximately 1 meter center, including necessary stainless steel fittings such as bends, elbows etc. (if required) all welded to give one piece of appearance without burrs or protuberances, bent to required shape to follow staircase profile, fixed to side of steps with M S insert plate appropriately of size 150mmx125mmx6mm thk painted with one coat primer & two coats of synthetic enamel paint as per design etc. complete.
-
9
-
... More
Supplying and fixing 4 mm thick Aluminium Composite Panel Cladding of make ‘EUROBOND’ in perfect line and plumb, approved Colours and shade with metallic finish. Aluminium Composite Panel shall consist of two Aluminium sheets (Alu. Alloy – 1100 H18) 0.50 mm thickness and 3 mm thick antitoxic Polyethylene core. Aluminium foil PVDF coated (PVDF Coating 30 to 32 micron). Frame made from 38 X 19 X 2 mm thick Aluminium Channel fixed to the beam/slab and wall with aluminium plated screws, fasteners and aluminium brackets whenever required. Fixing over it 4 mm aluminium composite panel bended at edges fixed with powder coated aluminium cleats fixed with proper rivets fixing the tray to the frame with sheet metal cadmium plated screws and filling the joints with Backer rods (Polyethylene 12 mm dia backer rod) and sealing the gaps. Joints with approved silicon weather Sealant (Dow Corning 789/Wacker 305).
-
5
-
... More
Providing and fixing in position Anchor Fasteners of required length and diameter with chemical grout ,Fisher, Hilti or Equivalent make as per manufacturers instructions including drilling , placing the bolt and certifying the strength etc. complete, with adequate anchor length to develop full strength of the bar, and proving the strength by conducting pull out test at site on a random sample etc. complete.
-
-
-
... More
Dia 12mm, min. anchor inside concrete 160mm
-
5
-
... More
Dia 16mm, min. anchor inside concrete 160mm
-
5
-
... More
Providing and fixing in position Rebars with Chemical Grout OF HILTI OR equivalent as per manufacturers instructions including drilling , placing the bolt as chemical anchor , and certifying the strength etc. complete, with anchor length to develop full strength of the bar, and proving the strength by conducting pull out test at site on a random sample etc. complete.
-
-
-
... More
Bar dia 12mm
-
5
-
... More
Bar dia 16mm
-
10
-
... More
Bar dia 20mm
-
5
-
... More
Rates on daily basis for providing Skilled workers,8 hr shift/day per person including required tools and tackles.
-
10
-
... More
Rates on daily basis for providing Unskilled workers ,8 hr shift/day per person, including required tools & tackles.
-
10
-
... More
Providing and fixing in position PVC Pipes, non pressure type, of 65mm dia as weep holes in Masonry and Concrete walls , including cutting , tying , placing in slope etc. complete.
-
848
-
... More
Providing and constructing Rain Water Harvesting System consisting of a collection tank and overflow pipe, with tank size of 4m x 3m x 2.5m.deep, constructed in 450thk. Brickwork in CM 1:6 and having 150 thk. PCC M10 grade at base, and filled with selected granular material of 6mm. to 10mm. gravel in 1000mm. thk. layer having a recharge bore of 150 dia. at base of tank, drilled in rock for 15m. length and bore filled with gravel of 6mm to 10mm. size for full height. Item rate to include cost of drilling and filling the bore with gravel , excavation and construction of collection tank etc. complete.
-
1
-
... More
Providing and applying 3mm Epoxy Polyurethane (EPU) Mat Finish ( application through Authorized Applicators of manufacturers such as Cipy, Sika or equivalent ) on floor after proper surface preparation adhesion promoting solvent free two components ready to use primer on prepared surface, after primer laying three components ready to use. Self-levelling solvent free ceramic filler enhanced self-smoothing joint less high build underlay or levelling screed of average thickness 2 mm after application of levelling screed applying 4 component ( epoxy clear resin + epoxy clear hardener + ceramic filler + concentrated colorant) ready to use solvent free self-levelling joint less, oil proof, waterproof uniform colour flooring of average thickness 1mm with Epoxy Polyurethane (EPU) which will provide total thickness of 3mm as per manufacturers specifications as per direction of Engineer In Charge.
-
260
-
... More
Epoxy for Coving : Epoxy for coving (up to 4'' high) including all material and labour complete as directed by Engineer incharge
-
72
-
... More
Epoxy Yellow Marking Paint: PU Epoxy Yellow or approved shade marking paint with smooth finishing as per approved paint of approved brand and manufacture of required colour to give an even shade: . as per standard specifications of CPWD, including surface preparation, cleaning watering, etc. complete. Two or more coats on new / old work.
Yellow or approved shade Band up to 100mm.
-
72
-
... More
Providing and fixing in position, Openable Frame with GI sheet 3mm thick with 50x 5thick GI Angle Edge frame to cover toilet ducts or openings including cutting necessary holes for exhaust pipes and sealing the edges of the cut outs by using "Kemperol "or equivalent material. Rate to include all the costs to complete the item.
-
5
-
... More
Providing and applying branded Filming on window to reduce glare from sunlight, from brands 3M™ Sun Control Window Films or Garware or approved equivalent etc complete as directed by Engineer-in -charge.
-
30
-
... More
Providing & laying Dry Stone Pitching 22.5 cm thick including line & level, preparing the surface, dressing, joint filling with M10 concrete etc complete as directed by Engineer-In-Charge.
-
20
-
... More
TOTAL FOR MISCELLANEOUS WORKS
-
-
-
... More
ROAD WORK & PARKING
-
-
-
... More
Preparation and consolidation of Sub Grade with power road roller of 8 to 12 tonne capacity, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of excess material,
-
246
-
... More
Construction of Granular Sub-Base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader/ Paver on prepared surface and compacting with vibratory roller to achieve the desired density, complete as per clause 401 -- Plant Mix Method and Grading - I Material
-
74
-
... More
Providing, laying, spreading and compacting graded stone aggregate to Wet Mix Macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. Laying By Grader/Paver.
-
50
-
... More
Proving and laying Dense Bituminous Macadam using crushed aggregates of Grading 1, premixed with bituminous binder of specified grade of Bitumen @ 4.50 per cent by weight of total mix and filler, transported to site with VTS , laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired density for 76-100 mm compacted thickness .USING Batch mix type hot mix plant with SCADA, Sensor Paver, Vibratory roller with Stone Dust filler.(VG-30 bulk bitumen rates to be considered to arrive at rates)
-
15
-
... More
Providing and applying Primer Coat with bitumen emulsion on prepared surface of granular Base including cleaning of road surface and spraying, primer at the rate of 0.60 kg/sqm using mechanical means.
-
246
-
... More
Providing and applying Tack Coat on the prepared surface heating by fames in Boiler and spraying bitumen set footed in bitumen boller on B.T. surface 5 kg/10 sqm.(VG-30 bulk bitumen rates are considered to arrive at rates)
-
246
-
... More
Providing and laying Bituminous Concrete using crushed aggregates of grading 1, premixed with bituminous binder @ 5.20 per cent by weight of total mix and filler, transported to site with VTS , laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired compaction for 50 mm compacted thickness with specified grade of Bitumen,Excluding prime / tack coat. For Bitumen of specified grade -- USING Batch mix type hot mix plant with SCADA, Sensor Paver, Vibratory roller with Stone Dust filler. (VG-30 bulk bitumen rates to be considered to arrive at rates)
-
7
-
... More
Providing bituminous Type A Liquid Seal Coat on bituminous surface including supplying all materials and bitumen of specified grade preparing existing road surface, heating and applying bitumen @ 0.98 KgSqm. by mechanical means, spreading chips and rolling, by static roller having weight 8 to 10 MT. etc. complete. (VG-30 bulk bitumen rates are considered to arrive at rates)
-
246
-
... More
Providing and laying heavy duty Coloured concrete Paving Block using rubber mould mat /glossy finish, of approved shape & loading capacity laid on 50mm thick compacted mix of crushed sand and 10mm grit cushion including required slope, camber compacting with mechanical compactor including skirting joints etc. as directed etc . Complete with Minimum concrete Grade of M 30.
-
-
-
... More
80 mm thick ( 45 MT )
-
210
-
... More
Providing & laying 250 micron LDPE sheet over the prepared subgrade above including joining by necessary overlapping as directed etc. complete.
-
210
-
... More
TOTAL FOR ROAD WORK & PARKING
-
-
-
... More
TOTAL
-
-
-
... More
GST 18%
-
-
-
... More
TOTAL
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements