Automotive Research Association Of India Tender
... More
Search from over 12139+ business opportunities that have been announced from the biggest Mahatenders, e tender Maharashtra, Maharashtra government tenders, and the Online Tender Notices posted on Maharashtra e tenders till date. Find opportunities that have come in from the multiple corporations, Maharashtra government departments, State PSUs, and Private companies from the state.
Automotive Research Association Of India - ARAI Tender
Laboratory Equipment and Services
Eprocure
Opening Date22 Apr 2022
Closing Date18 May 2022
Tender AmountRefer Documents
Costs
EMD
₹ 14,62,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2022_ARAI_685223_1Bid Award Id
ViewTender No
ID-1186-PR-60002091Tender Authority
Automotive Research Association Of India ViewPurchaser Address
-Website
http://https://www.araiindia.com/home
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
All kinds of Soil & Ordinary rock
-
-
-
... More
Depth not exceeding 0 to 1.5 m.
600
-
-
... More
Depth from 1.5m to 3m but not exceeding 3m.
70
-
-
... More
Filling with available Approved excavated earth in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, compacting using mechanical means as approved by engineer in-charge in order to achieve 95% of proctor density (for any lead and any lift ). Maximum size of boulder to be 150mm .
770
-
-
... More
Disposing off excess or unwanted material from excavation out side the plot area at a location pre approved by MIDC or of contractors choice out side MIDC, at any lead ,as directed by the Engineer from time to time, including stacking ,spreading or levelling etc. complete ,including obtaining written approval of the respective land owner for such disposal and indemnifying Owner , including payment of Royalty to Government and producing the receipt for record of the Owner ,and indemnifying Owner for any claim in future for short payment of Royalty etc. Measurement to be based upon Loose volume carted away by mechanical means such as Truck /Dumper.
12
-
-
... More
Providing Excavator (like JCB etc) with Bucket on Hourly basis for the work as directed by Engineer -in-charge. (The rate should include Operator, Helper, Fuel, Maintenance, Transportation & any other statutory requirements etc.)
5
-
-
... More
TOTAL FOR EXCAVATION - EARTHWORK
-
-
-
... More
SOLING AND FLOORING
-
-
-
... More
Providing total 300mm thk. Hard Core filling over the compacted plinth filling , in compacted layers of 150mm each ,including , laying ,spreading and compacting mix of Graded crushed Stone aggregate of 63mm to 22.4mm , including spreading , and filling with requisite type of screening / binding material to fill up interstices of coarse aggregates ,watering and compacting to required density of minimum 94%, by using appropriate compaction equipment etc. complete.
30
-
-
... More
Providing & laying 250 micron LDPE sheet over the prepared subgrade above including joining by necessary overlapping as directed etc. complete.
1175
-
-
... More
Providing and laying in position in M15 grade PCC 75mm. thk. as specified in floor, bedding using graded metal washed sand, including formwork, if necessary and laying in alternate panels, if required, including consolidation, watering, curing etc. complete.
21
-
-
... More
Providing & laying 75mm to 200mm .thick of M25 grade reinforced concrete in Flooring , including provision of expansion and contraction joints, dowel bars, concreting in panels and strips, junctions with / without columns, compacting with vibrating boom, power floating as specified on drawings / instructions. (Excluding reinforcement), but including form work using steel channels, curing by ponding etc. complete,
130
-
-
... More
Extra over above said item of floor concrete , for Vacuum dewatering and towelling treatment such as " Tremix " treatment, including curing etc. complete.
1175
-
-
... More
Extra over above said item of floor concrete, for providing and spreading or mixing , Floor Hardener of Sika Make " Chapdur " @ 6kg/Sqm., or any other equivalent hardener approved by Engineer in Charge ,before final trowel finish, as per manufacturer's requirements, etc. complete.
1175
-
-
... More
5mm.x 20mm. deep Groove cutting at 4m. c/c and filling with single component Sika flex pro-3 or Approved Chemical sealant , etc. complete.
825
-
-
... More
Providing & fixing MS dowel bars 20mm.dia x 900mm. Long at 300/750mm.c/c, half length of dowel bar in to be covered during concreting by using PVC sleeve & End Plug.
0.2
-
-
... More
Providing & fixing in position required thk. Of Foam Base Board of supreme or equivalent quality at various joints such as isolation joints at wall edge, and column junctions with provision of Baker Rod and sealing with Winsil-20 neutral base sealant manufactured by GE Silicon ,Or equivalent make, as per manufacturer's requirements ,etc. complete.
-
-
-
... More
16mm thick
5
-
-
... More
12mm thick
40
-
-
... More
Extra over above said item of floor concrete, for providing and spreading or mixing , Floor Densifyer of Ashford formula @ 5 Sqm/L., or any other equivalent Densifyer approved by Engineer in Charge , as per manufacturer's requirements, etc. complete.
550
-
-
... More
TOTAL FOR SOLING & FLOORING
-
-
-
... More
CONCRETE WORK
-
-
-
... More
Providing and laying in position Cement Concrete of specified grade including the cost of centering and shuttering including strutting, propping etc. and removal of formwork for : - All work up to plinth level :
-
-
-
... More
1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) for Foundations, footings, bases of columns, etc. for mass concrete.
21
-
-
... More
Extra for providing and mixing Water Proofing Material in cement concrete work in liquid or powder form as required by approved manufacturer's specification. Approved manufacturer are Sunanda Chemicals, Dr. Beck , Nina Water Proofing , Sika, Fosroc or approved equivalent.
350
-
-
... More
TOTAL FOR CONCRETE WORK
-
-
-
... More
REINFORCED CEMENT CONCRETE
-
-
-
... More
Providing and laying in position Concrete for Reinforced Concrete work , manufactured by machine batched, machine mixed and machine vibrated at site and /or Ready mixed concrete manufactured in fully automatic batching plant having continuous agitated mixer, and transported to site of work , in transit mixer, including pumping of concrete to desired location, design mix cement concrete of specified grade, using natural sand and /or crushed sand of approved quality ,including cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability, including use of reactive fly ash / cementitious materials, of approved grade as per the provisions of relevant I.S. Codes and as approved by the Engineer- in- Charge ,including the cost of water tight centering, shuttering propping , staging , keeping provision for cutouts in Slabs & walls as per drawing, finishing at all levels including grinding of joints to achieve level surfaces including ceilings . M-25grade reinforced cement concrete by using cement content as required for Strength , Durability , and workability etc. as required by the relevant codes. Rate to include cost of trial mixes design and required testing etc. complete. Shuttering material should be in new ply for all Slabs, beams, columns etc. Placing of Sleeves for services PVC/ MS will be in contractors scope as per drawing, in all levels and at all positions. Contractor should arrange for cover concrete block of same grade of concrete as the structural concrete member.
-
-
-
... More
All work Up to Plinth Level, including Retaining Walls , Pardies of Water Tanks , Foundations , Columns , Machine and equipment foundations, Trenches, etc. Including hacking , curing etc. complete.
21
-
-
... More
Reinforced cement concrete work above Plinth level in Columns, Beams , Slabs, walls (any thickness), Walls of water tanks , lift wells, including attached pilasters, parapet walls ,buttresses, plinth and string courses, fillets, pillars, piers, abutments, posts and struts, suspended floors, roofs having slope up to 15° landings, balconies, shelves, cantilevered chajjas, lintels, bands, plain window sills, staircases and spiral stair cases, kerbs ,steps ,and the like, Machine foundations , Trenches etc. . ,including hacking, curing, etc. complete.
800
-
-
... More
Reinforced cement concrete work in Vertical and Horizontal Fins, Pardies, Boxes, projections, individually or forming box louvers, facias and eaves boards, at all height above plinth, including Hacking , Curing etc. complete.
5
-
-
... More
EXTRA OVER above said basic item of M25 Concrete , For change of Grade from M25 to M30
500
-
-
... More
EXTRA OVER above said basic item of M25 Concrete , For change of Grade from M25 to M35
5
-
-
... More
EXTRA OVER above said basic item of M25 Concrete , For change of Grade from M25 to M40
5
-
-
... More
TOTAL FOR REINFORCED CONCRETE WORK
-
-
-
... More
STEEL REINFORCEMENT
-
-
-
... More
Providing , placing and tying in position , Reinforcement for R.C.C. work including straightening, cutting, bending, binding wire (16g), placing in position and binding, Testing costs , Wastage costs ,etc.all complete, up to plinth level and above plinth level at all heights. Reinforcement used in structure shall be free of rust.
-
-
-
... More
Thermo-Mechanically Treated bars of FE 500 grade .
135
-
-
... More
TOTAL FOR STEEL REINFORCEMENT
-
-
-
... More
MASONARY WORK
-
-
-
... More
BRICK WORK
-
-
-
... More
Fly Ash Bricks
-
-
-
... More
Brick work with Non modular sized ,Machine made Fly ash Bricks with minimum 10% Cement , confirming to I.S. 12894-2002 , of class designation 7.5, ( 75 kgf/sq cm ), for wall thickness 100 mm , with fly ash confirming to I.S.3812-1981, in superstructure at all floors and heights , etc. complete
-
-
-
... More
Cement mortar 1:6 (1 cement :4 coarse sand)
10
-
-
... More
Fly Ash Bricks
-
-
-
... More
Brick work with Non modular sized ,Machine made Fly ash Bricks with minimum 10% Cement , confirming to I.S. 12894-2002 , of class designation 7.5, ( 75 Kgf/sq cm ), for wall thickness from 150 to 450 mm, with fly ash confirming to I.S.3812-1981, in superstructure at all heights , including curing etc. complete,
-
-
-
... More
Cement mortar 1:6 (1 cement : 6 coarse sand)
400
-
-
... More
Cement mortar 1:4 (1 cement :4 coarse sand)
5
-
-
... More
Extra for providing and placing in position 2 Nos. 8mm dia. M.S. bars at 0.9m intervals in height ,for half brick masonry (100mm to 150 mm) (with F.P.S. bricks), including cost of steel etc. including covering the bars with M10 grade concrete band of 100mm.thk. including formwork, curing etc. at all heights complete.
50
-
-
... More
STONE WORK
-
-
-
... More
Providing and laying in position, Uncoursed Rubble Masonry (UCR) in Cement Mortar with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size)including placing horizontal header stones headers of 150x 150 mm of required length to cover 90% of wall width at every 2.5m cross centres and vertical keys of stones of minimum 300mm length, at every 900 c/c .
-
-
-
... More
Cement mortar 1:6 (1 cement : 6 coarse sand)
10
-
-
... More
Providing & Doing sunk Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand)
-
-
-
... More
Finishing the UCR wall surface with Sunk Pointing
50
-
-
... More
Providing and laying in position , Plum Concrete wall as plinth wall and or retaining wall , along plot boundary, above and or below ground , with height of wall in the approximate range of 0 to 7m, depending upon local ground condition , including fixing and removing formwork ,including required staging , using approximately 70% stones and 30% mortar, including layer wise placing of approved hard stones as rubble of max 200 mm size and placing of mortar of grade M15 concrete with maximum size of aggregates as 12mm, over and in between the stones , by manual ways or through concrete pump to cover all stone faces ,including rodding etc. to achieve compacted homogeneous mass without any pockets or honey combs , including placing horizontal header stones or precast concrete headers of 150x 150 mm M15 grade, of required length to cover 90% of wall width at every 2.5m cross centres and vertical keys of stones of minimum 300mm length, at every 900 c/c , including placing of pvc pipes as weep holes as required by design ( cost of PVC pipe is paid separately ) , curing etc. complete.( cost of all work including form work ,staging , concrete etc. is to be included in the rate )
5
-
-
... More
TOTAL FOR MASONARY WORK
-
-
-
... More
DOORS AND WINDOWS
-
-
-
... More
STEEL DOORS
-
-
-
... More
Providing and fixing in position, Steel Doors ( Shakti Met- Door make or Equivalent make ) - in Approved Colour, with Dorma Fittings, with Mini. Two Hour Fire Rating, single / double leaf MS galvanized doors of the type size & leafs as mentioned below, with door frame and fixing one layer of intumescent strip 30x2mm thick to shutter & all accessories complete all as per drawing details including and confirming to IS 3614 (PART 2) 1992 BS476 (PART 20 & 22) and ISO834, including mortar fill in main frame.
1: Frame (size 143 x 57mm, (18 g) 1.20mm thick, galvanized steel sheet formed to single Rebate profile, welded type, to be fixed on plastered openings with the help of 8mm Expansion Anchor Fasteners and grout),
2: Shutter : Constructed from 0.80mm Thick Galvanized Steel Sheet formed to provide a 46mm thick fully flush, double skin door shell with Lock Seam joints at stile edges. Infill of Honeycomb Kraft Paper is used to give the required rigidity and effective acoustic and thermal insulation 3: Vision glass : Where specified only, Each shutter should have a vision glass of required size with 5mm thick clear toughened glass to all doors and frosted glass to toilet entrance doors. 4: FINISH : The doorframes and door shutters are finished with Thermosetting Polyurethane paint of Aliphatic Grade providing high levels of scratch resistance and durability. 5: Fittings & Fixtures :- HINGES : Stainless Steel Ball Bearing Butt Hinges 3 mm thick fixed flush to the frame and shutter ( Profile 101x89x3mm thick ).
-
-
-
... More
Mortise Sash Locks : mortise sash lock ( ml 100 a ) with internal thumb turn & external key operation cylinder with ss lever handles.
SS 'D' handles : ss 'd' handle 254 mm (with rose)
ss push plate ( 150 x 300 mm ) with sticker of "Pull & Push"
Door Closers : Ryobi 8853 - standard arm ( with cover ) Concealed Flush Bolt :- 600 mm long ( for doors 2201 - 2500 mm ) , including providing and fixing panic bar for fire exits, with sticker Fire exit.
Seals: seal for air tightness(Indian) , etc. complete.
All Fitting of Dorma make or equivalent. Providing & filling filing between Frame and wall with liquid foam material in contractors scope.
Supplier Drw. to be provided and approved by Engineer In Charge.
-
-
-
... More
D-1.2m x 2.4m, single Shutter, Door with vision panel 200 wide x 400mm high .
34.56
-
-
... More
Providing and fixing in position, General purpose Steel Doors ( Shakti Met- Door make or Equivalent make ) - in Approved Colour, with Dorma Fittings single / double leaf MS galvanised doors of the type size.
1: Frame (size 100 x 57mm, 0.80mm thick, galvanised steel sheet formed to single Rebate profile, welded type, to be fixed on plastered openings with the help of 8mm Expansion Anchor Fasteners and grout) ,The frames of shutter shall be finished with primer coating stoved zinc phosphate primer and thermo setting synthetic enamel paint(fire proof paint) of approved colour.
2: Shutter : Constructed from 0.80mm Thick Galvanized Steel Sheet with provision of view panel formed to provide a 40mm thick fully flush, double skin door shell with Lock Seam joints at stile edges. Infill of Honeycomb Kraft Paper is used to give the required rigidity and effective acoustic and thermal insulation 3: Vision glass : Where specified only, Each shutter should have a vision glass of required size with 5mm thick clear toughened glass to all doors and frosted glass to toilet entrance doors. 4: FINISH : The doorframes and door shutters are finished with Thermosetting Polyurethane paint of Aliphatic Grade providing high levels of scratch resistance and durability. 5: Fittings & Fixtures :- HINGES : Stainless Steel Ball Bearing Butt Hinges 3 mm thick fixed flush to the frame and shutter ( Profile 101x89x3mm thick ).
-
-
-
... More
Mortise Sash Locks : mortise sash lock ( ml 100 a ) with internal thumb turn & external key operation cylinder with ss lever handles.
SS 'D' handles : ss 'd' handle 254 mm (with rose)
ss push plate ( 150 x 300 mm )
Door Closers : Ryobi 8853 - standard arm ( with cover ) Concealed Flush Bolt :- 600 mm long ( for doors 2201 - 2500 mm ) , Seals: seal for airtightness(Indian) , etc. complete,
All Fitting of Dorma make or equivalent. Providing & filling filing between Frame and wall with liquid foam material in contractors scope.
Supplier Drw. to be provided and approved by Engineer In Charge.
-
-
-
... More
D-2.4 m x 2.4 m- Double Shutter,Fire Door,with vision panel,200 mm wide x 400 mm Height
40.32
-
-
... More
Supplying and fixing Electrically operated DIRECT DRIVE Motorised Rolling shutters as per IS 6248 , of approved make, such as Gandhi Automation , Crawford , Or equivalent , made of laths with size min. 80 mm x 1.20mm. thick , Single Skin Galvalume , Colour Coated with approved colour , interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, with rolled formed min. 2mm thick ,side guides and arrangements for inside and outside locking , including EPDM rubber seal at bottom as weather seal , including top cover of 1.20mm. thickness for rolling shutters, including provision of Safety Edge mechanism for reversing motion in case of any obstruction in the path , including Self breaking Worm Gears , Integrated limit switches, Safety Brakes and Overload protection , Push button key selector , Manual over ride option incase of power failure , including IP 54 protection rate , and designed for wind pressure of Min. 150 kgs/sqm , and with operating torque of min. 400 NM etc. complete.
-
-
-
... More
RS - 3 m height x 4m wide
48
-
-
... More
ALUMINIUM DOORS & WINDOWS
-
-
-
... More
Providing and fixing Aluminium work with ivory or black/Ivory Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) for various items like doors, windows, ventilators and partitions, louvered windows etc. with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, metered and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings, including Aluminium Subframes (0.93 kg per meter ) made from yellow zinc chromotized Section as per drawing details, including Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. This doors to be compulsorily Pivot type.
-
-
-
... More
With same specifications as above ,for partly glazed Single shutter doors with 50% , 5.5mm NON toughened clear glass ( saint Gobain or Equivalent ), and 50% , 12mm thick prelaminated particle board with decorative lamination on both sides, flat pressed three layer or graded wood particle board Pivot type with all accessories conforming to IS: 12823 Grade l Type ll, etc.,. complete as per directions of engineer-in-charge. For Wall opening size of 1.5m x 2.4m
85
-
-
... More
with same specification as above for partly glazed double shutter door with 50% 5.5 mmm NON toughened clear glass(saint Gobain or Equivalent) and 50% 12 mm thick prelaminated particle board with decorative lamination n on both side
-
-
-
... More
Providing and fixing in position Fixed Glazed windows at all heights, including 5.5mm Tinted Non - toughened glass ( Saint Gobain or equivalent ) fixed in Aluminium frame using appropriate Z or T section etc. complete, Size of frame. 1500X1950mm high /1000 MM X 1500 mm /750mm x 1500 mm.
1.08
-
-
... More
For Fixed partitions with 50% Glazing with 5.5mm clear Glass ( saint Gobain or equivalent ) and 50% 12mm thick prelaminated particle board with decorative laminate on both sides, flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed with C.P. brass / stainless steel screws etc. complete as per directions of engineer-in-charge , for partitions with aluminium members at average 1.2m horizontal spacing with approximate height as 4m.
365
-
-
... More
For Fixed partitions with 12mm thick Prelaminated Particle Board with decorative laminate on both sides, flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge , for partitions with aluminium members at average 1.2m spacing with approximate height of partition as 4 to 5m.
5
-
-
... More
Providing and fixing in position powder coated aluminium section Three Track Sliding window mounted on rectangular frame as per drawing details ( 16 gauge 3/4" heavy Jindal section series ) and handle selected quality 5.5mm thick Plain glass ( Saint Gobain ) to be fixed in shutter with neoprene gasket with approved quality PVC rollers necessary locks, handles, pvc lining, filling joints by sealants and wooden encasement if required wherever necessary etc. Complete as directed by Engineer In charge, Two Glass shutters and one shutter with G.I mosquito mesh, etc. complete. Powder Coated with colour approved by ARAI.
-
-
-
... More
W- Sliding Windows , approximate size 1500/1200 x 1500/1200
100
-
-
... More
Providing and Fixing in position Aluminium fixed Glass windows for toilets including sub frames, with Gap provision for Exhaust fan ,sealing the gap around etc. complete, size 600 x 750/900/1200. Powder Coated with colour approved by ARAI.
2.16
-
-
... More
TOTAL FOR DOOR & WINDOWS
-
-
-
... More
STRUACTURAL STEEL WORKS
-
-
-
... More
Fabricating and Erecting in place Structural Steel Work using Rolled or Built up sections or angles, or channels , for Roof trusses , Purlins, Gantry Girders, Monorails , Columns , Cleats , Brackets , etc. all Structural steel works, including Preparing shop drawings, obtaining consultant's approval, supplying, fabricating, delivering at site, hoisting and fixing in position including all temporary staging and supporting work and , in accordance with the design, drawings prepared by the consultants. the rate of steel work shall include assembly, welding, jointing, building up new sections using plates / rolled section, cost of fasteners , nuts, bolts of 8.8 grade and washers, pre-heating the sections to temperatures up to 250ºC if thickness of the section is equal to or more than 25mm.and fabrication out of the following types of structural steel material with connections using plates, channels and angles, gusset plate, connection bolts, cleats, fasteners etc. as per drawing, steel conforming to IS:226 and IS:2062-Gr.A with minimum yield strength as indicated below , including one coat of primer and two coats of Approved shade of synthetic enamel paint , in all levels and at all positions etc. all complete,(Fasteners, welding electrodes, consumables will not be paid separately. Rates inclusive of necessary tests of materials and welds as per Indian Standards and technical specifications).
-
-
-
... More
Using Rolled Sections and Plates of Grade YST 250 Mpa
1
-
-
... More
Using M.S. Tubes produced by high frequency induction welding such as TATA Structural with YST 310, using RHS / SHS as per the design given by Consultant
0.5
-
-
... More
Supply ,Fabrication and Erection of Chequered Plate 6mm or 8mm or 10 mm thick, as per the design drawing including fixing with counter sunk bolts of 8mm dia , painting etc. similar to the specifications given for general fabrication item etc. All complete.
100
-
-
... More
Providing , Fabricating , Erecting , aligning , in required position , Miscellaneous items of Structural Steel using mild steel , and weighing individually not more than 3000 kgs , such as Platforms, Ladders , Nosing Angles with hold fasts, Insert plates with Hold fasts , Railings using M S Tubes , Stools and frames , suspenders for false ceiling and frames for trap doors , Manholes , brackets for cable trays and pipes , etc. as directed by the engineer, including cutting , grinding , welding , painting with primer and two coats synthetic enamel paint ,cleaning etc. complete ,including any shop drawing if so required.
5
-
-
... More
Providing, fabricating and erecting, Miscellaneous Structural Steel Work using Mild Steel, such as M.S. insert plates of various sizes with welded hold fasts drilling of plate & any kind of fabricated works etc. including Anti Rust one coat of primer and two coats of PU based Anti-Rust Epoxy Paint at all heights etc. complete.
1
-
-
... More
Providing , cutting ,bending, welding and fixing in position, in required line and level, Nosing Angles ,of various Shapes and thicknesses and sizes at all locations and all levels, including welding of reinforcement or hold fasts, drilling of angle, painting with primer and two coats of synthetic enamel at all heights etc.as shown on the drawing etc. complete,
100
-
-
... More
Providing and Fixing in Position miscellaneous items of Fabrication using Galvanized sections such as Galvanised Toe Guard,Angle , GI Frames , etc. complete as per the drawing.
500
-
-
... More
TOTAL FOR STRUCTURAL STEEL WORK
-
-
-
... More
FLOORING
-
-
-
... More
Kota Stone Slab Flooring including 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :Basic rate Rs.400/- per Sqm delivered at site without GST, including providing temporary Protection by using PVC Sheet , POP as approved by Engineer In Charge.
-
-
-
... More
20 mm to 25mm thick.
30
-
-
... More
Kota stone slabs 20 mm thick and upto a length of 1600 mm in Risers & Tread of Steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. Basic rate Rs.400/- per Sqm delivered at site without GST. Including providing temporary Protection by using PVC Sheet , POP as approved by Engineer In Charge.
100
-
-
... More
Extra for pre finished Half rounded nosing in Treads of steps of Kota stone slab with 2nos grooves at edge etc completed.
210
-
-
... More
Granite 18 mm thick ,mirror polished , in Window Sills with edge rounding and edge polishing, laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete, using single length of 1.5m meter. (Basic Rate Rs 2000 / Sqm delivered at site without GST).
10
-
-
... More
Providing and fixing Ist quality Ceramic Glazed wall tiles of size 300 x 450 conforming to IS : 15622 (thickness to be specified by the manufacturer) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete upto height of 2.1m .(Basic Rate delivered at site Rs 500 / Sqm without GST)
60
-
-
... More
Providing and laying Anti Skid Ceramic floor tiles 300x300 mm of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand) including cutting the tiles and fixing SS anti cockroach trap, finishing pointing the joints with white cement and matching pigment, cleaning the tiles if required with acid wash ,etc., complete, including providing temporary Protection by using PVC Sheet,POP as approved by Engineer In Charge. (Basic Rate Rs 550 / Sqm without GST).
55
-
-
... More
Providing and laying double charged Vitrified floor tiles, for flooring and skirting, in different sizes (thickness to be specified by the manufacturer) with water absorption's less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc., complete, including providing temporary Protection by using PVC Sheet,POP as approved by Engineer In Charge.
-
-
-
... More
Size of Tile 60x60 cm (Basic Rate Rs 650 / Sqm without GST)
375
-
-
... More
Skirting of 100mm height , 600 long ,
25
-
-
... More
Providing and applying 3mm Epoxy Polyurethane (EPU) Mat Finish ( application through Authorized Applicators of manufacturers such as Cipy, Sika or equivalent ) on floor after proper surface preparation adhesion promoting solvent free two components ready to use primer on prepared surface, after primer laying three components ready to use. Self-levelling solvent free ceramic filler enhanced self-smoothing joint less high build underlay or levelling screed of average thickness 2 mm after application of levelling screed applying 4 component ( epoxy clear resin + epoxy clear hardener + ceramic filler + concentrated colorant) ready to use solvent free self-levelling joint less, oil proof, waterproof uniform colour flooring of average thickness 1mm with Epoxy Polyurethane (EPU) which will provide total thickness of 3mm as per manufacturers specifications as per direction of Engineer In Charge.
475
-
-
... More
Epoxy for Coving
138
-
-
... More
Epoxy yellow marking paint
154
-
-
... More
TOTAL FOR FLOORING
-
-
-
... More
ROOFING
-
-
-
... More
Providing and fixing on wall face unplasticised Rigid PVC Rain Water Pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.(i) Single socketed pipes. etc. complete.
-
-
-
... More
165 MM diameter (Pressure 6kg/CM2)
130
-
-
... More
100 MM diameter (Pressure 6kg/CM2)
12
-
-
... More
Providing and fixing on wall face unplasticised - PVC moulded Fittings/ Accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion, including making leak proof joints and testing the same etc. complete.
-
-
-
... More
Coupler 110 mm
2
-
-
... More
Single push fit Coupler 110 mm
2
-
-
... More
Bend ( PLAIN ) 110 mm
2
-
-
... More
Shoe (plain) 110 mm
2
-
-
... More
Coupler 165 mm
10
-
-
... More
Single push fit Coupler 165 mm
5
-
-
... More
Bend ( PLAIN ) 165 mm
10
-
-
... More
Shoe (plain) 165 mm
5
-
-
... More
Tee for 165 mm diameter
10
-
-
... More
Tee for 110 mm diameter
2
-
-
... More
cowl
5
-
-
... More
Bend ( Cap ) 165 mm
10
-
-
... More
Providing and fixing unplasticised G.I U-Clamps of approved design to unplasticised PVC rain water pipes by means of approved bracket, etc complete.
-
-
-
... More
110 mm
10
-
-
... More
165 mm
90
-
-
... More
Providing and fixing to the inlet Mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams. etc. complete.
16
-
-
... More
Providing & fixing UPVC single equal tee with door of size 110mm x 110mm x 110 mm for water pipes of diameter 110 mm. etc. complete.
5
-
-
... More
Providing & Fixing in position single walled with 0.50 mm TCT AZ 150 GSM roofing or cladding sheet ,fixtures like self drilling self tapping screw with EPDM washers,including stitching/sealing using approved seleant as required to make water tight installation etc complete.
155
-
-
... More
Providing & fixing in position with 0.50 mm TCT AZ 150 GSM,PPGL with approved shape and size with machine sharing and bending in PPGL with silicon sealants and SDS required etc.complete (Upto 600 mm Girth)
40
-
-
... More
TOTAL FOR ROOFING
-
-
-
... More
PLASTERING & PAINTING
-
-
-
... More
Providing & applying, in single coat, Rough Coat Internal Cement Plaster ,min.12mm thick , in cement mortar 1:4, ( 1Cement : 4 fine natural sand) for dado , to concrete, fly ash Block / brick surface, on walls in all levels and at all positions, on joints, and corners rounded off, Fibre Mesh including H Frame/cup lock scaffolding & curing etc. complete.
100
-
-
... More
Providing & applying, in single coat, Internal Cement Plaster, smooth finished , min.15mm thick , to rough side of wall, or RCC , in cement mortar 1:4, ( 1Cement : 4 fine natural sand) , to concrete, fly ash Block / brick surface, on walls in all levels and at all positions, on joints, and corners rounded off, Fibre Mesh including H Frame/cup lock scaffolding & curing etc. complete, giving smooth finish . The Finished Surface to be approved by Engineer in charge .
4250
-
-
... More
Providing & applying ,External cement Plaster min.18 mm thk, at all heights, in two coats, under layer min. 12 mm thick cement plaster 1:5 (1 cement: 5 natural coarse sand) and a top layer min. 6mm thick cement plaster 1:3 (1 cement: 3 natural coarse sand) finished with uniform grain structure as per approved sample , using mechanical drum type plaster throwing equipment ( Dabba Plaster ) , to concrete, fly ash Block / brick surface, on walls in all levels and at all positions with Fibre Mesh & water proofing compound of KEM PLAST 74 , SIKACIM PINK OR equivalent including H Frame/cup lock ,drip mould as required, including edge strip smoothening at corners,including any coving required over chajjas, including scaffolding, at all levels & curing etc. complete.
2825
-
-
... More
6 mm Cement Plaster 1:3 (1 cement: 3 coarse natural sand), At all levels, smooth finished over RCC slabs and beams & Staircase Waist slab bottom.
196
-
-
... More
PAINTING
-
-
-
... More
All painting rates to including Providing , mixing supplying , scaffolding , cleaning of surfaces ,finishing and any curing required, at all heights and levels.
-
-
-
... More
INTERIOR FINISHING
-
-
-
... More
Distempering with Dry Distemper of approved brand such Asian / ICI Dulux or equivalent (Two or More coats) and of required shed on new work, over and including priming coat of whiting to give even shade including H Frame/cup lock scaffolding at all height complete.
200
-
-
... More
Distempering with 1st quality Acrylic Washable Distemper (ready mixed) of approved manufacturer and of required shade and colour complete. as per manufacturer's specification, using Asian or equivalent make, including base preparation by cleaning, priming with acrylic primer etc. as per standard specifications of CPWD, including watering, curing, H Frame/cup lock scaffolding at all height etc. complete.
-
-
-
... More
Two or more coats with primer & 2 coats putty.
4450
-
-
... More
Applying Single finishing coat with same paint specification as mentioned in item 85 as required, including cleaning of surface etc. Completed as instructed by engineer in charge.
500
-
-
... More
Painting with Synthetic Enamel Paint (Internal)of approved brand and manufacture to give an even shade : Two or more coats on new work ,including base preparation on walls by cleaning, priming with appropriate primer , crack filling with approved material , etc. as per standard specifications of CPWD, including watering, scaffolding at all levels etc. complete. (internal finishing).
2100
-
-
... More
EXTERIOR FINISHING
-
-
-
... More
Finishing walls with 100% Premium Acrylic Smooth Exterior Paint with Silicone additives of required shade using Asian or equivalent make, of any approved shade ,including base preparation by cleaning, priming with acrylic primer , crack filling with approved material , etc. as per standard specifications of CPWD, including watering, scaffolding at all levels etc. complete.
-
-
-
... More
Two or more coats applied min. @ Min. 1.43 ltr/ 10 sqm. over and including base coat acrylic primer applied.@ Min. 2.20 kg/ 10 sqm. To obtain uniform appearance as directed by The Engineer in Charge, etc. complete.
2825
-
-
... More
Applying Single finishing coat with same paint specification as mentioned in item 88 as required and instructed by engineer in charge.
500
-
-
... More
Painting with Synthetic Enamel Paint (External )of approved brand and manufacture to give an even shade : Two or more coats on new work ,including base preparation on walls by cleaning, priming with appropriate external primer , crack filling with approved material , etc. as per standard specifications of CPWD, including watering, scaffolding at all levels etc. complete.
50
-
-
... More
TOTAL FOR PLASTERING & FINISHING
-
-
-
... More
INTERNAL SANITARY,WATER SUPPLY & DRAINAGE WITH EXTERNAL SEWAGE SYSTEM
-
-
-
... More
PART - A : SANITARY FITTINGS
-
-
-
... More
Supplying & fixing approved colour glazed Wall mounting European water closet with heavy duty plastic seat and cover in matching colour with non-corrosive hinges, bolts, washers, cast iron chair bracket, grouting the bracket in C.C.1: 2:4 mix, fixing the Water Closet to a perfect level over bracket using required fixing materials, making holes on existing surfaces, restoring the damaged portion to their original condition, including c.p. health faucet with wall bracket , etc. c.p .tap , c.p. cock , c.p. tissue paper holder , etc., complete .All fixtures and fittings shall be of approved make excluding cost of C.P. items which will be paid as per respective item given below.
(Basic Price - 16000/per No.)
-
-
-
... More
Hindware Make or equivalent
2
-
-
... More
Supplying & fixing approved colour glazed Undercut Oval Washbasin with pre fabricated brackets using Mild Steel members fixing to Wall dado with required materials like teak wood plugs, packing pieces, screw nails, testing including applying two coats of anticorrosive paint over one coat of primer for bracket, including providing & fixing base kadappa and 25 mm mortar over the same before fixing granite ,including Fascia Patti with mirror polish in granite of required height, including all required accessories such as , drain arrangement ,including 18mm thick, Jet Black mirror finished Granite Counter with Jet Black mirror finished fascia patii , rounding edges, filling silicone sealant at all corners & gaps between granite & wash basin etc complete.
(Basic Price - 6000/per No.)
-
-
-
... More
Hindware Make or equivalent
3
-
-
... More
Supplying and fixing of approved colour Sensor Glazed Urinal including all accessories such as c.p. spreader etc., with one pair of cast iron brackets, installing the urinal to plumb testing etc. complete, All fixtures and fittings shall be of approved make. excluding cost of C.P. items which will be paid as per respective item given below.
(Basic Price - 18000/per No.)
-
-
-
... More
Hindware Make or equivalent
3
-
-
... More
Supplying & fixing Auto Flush for Urinals, connecting to existing pipe work using required fixing materials, testing etc. complete. (Basic Price - 5000/per No.)
-
-
-
... More
Jaguar make or equivalent
3
-
-
... More
Supplying Chromium Plated Towel Rod of 20 mm dia, 60 CM Long with aluminium anodized brackets fixing to wall dado using suitable size non corrosive screws, teak wood plugs etc complete etc. (Basic Price - 1000/per No.)
MAKE- Jaguar or equivalent
2
-
-
... More
Supplying Jaguar or equivalent Make Chromium plated Coat Hook, fixing to wall dado using suitable size non corrosive screws, teak wood plugs, etc. complete:- (Basic Price - 200/per No.)
2
-
-
... More
Providing and fixing stone table rubbed and polished of size 105 cm X 60 cm deep and 1.8 cm thick fixed in Urinal Partitions with cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 stone aggregate 6 mm nominal size) and both side finished mirror smooth.
-
-
-
... More
Jet Black Granite Stone with full round moulded edges.
2.5
-
-
... More
Supplying & Fixing following chromium plated bath room fixtures of Jaguar Make, connecting to water Pipe using required jointing material over threaded portions testing etc complete.
-
-
-
... More
Health Faucet (Basic Price - 1800/per No.)
2
-
-
... More
TWO WAY - Bib cock (Basic Price - 1800/per No.)
2
-
-
... More
Angular Stop Cock - (Basic Price - 1800/per No.)
7
-
-
... More
Supplying & Fixing following chromium plated Bath Room fixtures of Jaguar Make or equivalent connecting to water Pipe using required jointing material over threaded portions testing etc complete.
-
-
-
... More
Jaguar SENSOR Faucet (pillar) (Basic Price - 15000/per No.)
3
-
-
... More
Supplying 32 MM dia, Chromium Plated Bottle Trap of approved brand with extension piece, wall flange, fixing to wash basin or urinals, making water tight joints etc complete:
5
-
-
... More
Supplying 32 MM dia chromium plated Waste Coupling with Dome grating fixing to urinals and wash basins, making watertight joints etc complete. To produce sample on best available in the market for approval.
5
-
-
... More
Providing and supplying, & fixing, Anti Cockroach trap in SS 304 as per approved sample.
5
-
-
... More
Supplying & Fixing Toilet Roll Holder of Jaguar Make, etc complete.
2
-
-
... More
PART - B : WATER SUPPLY:
-
-
-
... More
Providing and laying in position , TATA MAKE Class B Galvanized Iron Pipes for water supply lines ,including, Supplying TATA MAKE Class ‘B’ G.I. Pipes, ‘R’ Brand or equivalent Make G.I. Pipe specials, applying 3 coats of anti corrosive paint wherever pipes are laid below ground level or concealed in wall or floors, applying 3 coats of Enamel Paint of any shade using best quality paint, wrapping with Hessian cloth dipped in hot bitumen for pipe portions when laid in trench, making earth excavation to required length, width, depth upto 1.5 M below ground level in all kinds of soil other than rock requiring blasting, cutting pipes to required lengths, making threaded ends, fixing to G.I. Pipe specials, installing pipes to a perfect level, alignment, including chasing in masonry to conceal the pipes, making holes, restoring the damaged portions to their original condition, fixing the exposed pipe work with clamps fixed to M.S. Brackets conducting hydraulic test to a pressure of 7 KG/CM2 etc. complete.
-
-
-
... More
Using 15 mm dia G.I.Pipe work
5
-
-
... More
Using 20 mm dia. GI pipe work
5
-
-
... More
Using 25 mm dia GI pipe work
5
-
-
... More
Using 32 mm dia. GI pipe work
5
-
-
... More
Using 40 mm dia. GI pipe work
5
-
-
... More
Using 50 mm dia. GI pipe work
5
-
-
... More
Using 75 mm dia. GI pipe work - For internal works
5
-
-
... More
INTERNAL WATER SUPPY
-
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including allCPVC plain & brass threaded fittings, i/c fixing the pipe with clampsat 1.00 m spacing. This includes jointing of pipes & fittings with onestep CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.
Concealed work, including cutting chases and making good the walls etc.
-
-
-
... More
Using 15 mm dia
25
-
-
... More
Using 20 mm dia.
5
-
-
... More
Using 25 mm dia
25
-
-
... More
Using 32 mm dia.
5
-
-
... More
Using 40 mm dia.
40
-
-
... More
Using 50 mm dia.
5
-
-
... More
EXTERNAL WATER SUPPY
-
-
-
... More
Providing and fixing Unplastisized Chlorinated Polyvinyl Chloride (UPVC WHITE ) pipes, including all UPVC plain & brass threaded fittings, including fixing the pipe with
GI U clamps at 1.00 m spacing on GI Z bracket. This includes jointing of pipes & fittings with one step UPVC solvent cement and testing of joints complete
as per direction of Engineer in Charge.
-
-
-
... More
25 mm nominal outer dia Pipes OF Grade SCH - 80
5
-
-
... More
40 mm nominal outer dia Pipes metre of grade SCH-80
5
-
-
... More
32 mm nominal outer dia Pipes metre of grade SCH-80
5
-
-
... More
50 mm nominal outer dia Pipes OF Grade SCH - 80
5
-
-
... More
Supplying and fixing in position , UPVC ball Valve of approved Make with I.S.I.Mark joining ends of pipe using joining material, etc complete.
-
-
-
... More
25 mm dia ball valve
1
-
-
... More
32 mm dia ball valve
2
-
-
... More
40 mm dia ball valve
2
-
-
... More
50 mm dia ball valve
1
-
-
... More
S. S flexible Connector pipe between pillar cock to angular cock in wash basin & between Flush tank to WC.
5
-
-
... More
Supply, installation of Double walled SINTEX, or Plasto or equivalent Water storage tanks, with cover including all the nozzles like Air vent, inlet , out let drain as per the locations to be indicated during execution.
-
-
-
... More
5000 Lit
1
-
-
... More
Providing and fixing UPVC Non- Return Valve of approved quality (screwed end) :
-
-
-
... More
40 mm nominal bore
-
-
-
... More
Horizontal each
2
-
-
... More
Vertical each
2
-
-
... More
PART - C : SOIL & WASTE PIPES
-
-
-
... More
Supplying SWR U.P.V.C pipes , grey coloured Pipe conforming to IS 13592 and pipe specials conforming to IS 5382, cutting to required length, fixing pipe specials along with SWR U. P.V.C. Pipe, Making ring seal couplers to join the pipe and pipe specials for 110 mm dia and 90 mm dia, using solvent cement solution to pipes of 75 mm dia to 40 mm dia laying the pipes to a gradient for works below floor level, fixing the pipe and pipe specials in vertical locations using GI U clamps AT 1 M C/C connecting to GI Z brackets, making holes in masonry, cutting grooves to conceal the pipes, restoring damaged portion to their original condition using cement, river sand, bricks, jelly etc conducting water test for leak proof joints Fixing & removing scaffolding for pipe work in all locations etc. complete.
-
-
-
... More
110 mm dia pipe work
40
-
-
... More
80 mm dia pipe work
30
-
-
... More
Supplying Nahani traps with 75 mm or 90 mm dia outlet Made of UPVC of ‘Supreme’ or ‘Lakshmi’ or ‘Infra’ Make making holes, cutting the surfaces, laying cement concrete in 1:3:6 Mix with 20 mm stone jelly, restoring the damaged portions to their original condition, providing and fixing square shape P.V.C. grating at floor level, grating with frame etc. complete etc.
5
-
-
... More
Supplying white glazed ‘S’ trap, 100 MM size, with water seal of 50 MM, fixing in perfect position, laying cement concrete in 1:3:6 Mix using 20 MM stone jelly all-round the trap, providing and fixing grating in UPVC, providing 110 MM dia UPVC Pipe over glazed trap to make up the level of platform for urinal portion, cutting concrete or making holes, restoring damaged portion to their original condition etc complete etc.
2
-
-
... More
Providing, laying and jointing SWR UPVC Pipes with all specials such as bends ,sockets ,back nuts ,elbows ,tees ,reducers ,clamps etc. including fixing in walls or under floor or ground with necessary excavation and back filling, chasing & making holes in walls and floors ,sealing the joints with appropriate chemicals, making them good after the work., laying to proper slope in vertical & horizontal direction, pressure testing the entire line before concealing and testing the line and joints, after completion etc. complete.
-
-
-
... More
40 mm dia. Open
10
-
-
... More
50 mm dia. open
5
-
-
... More
80 mm dia. Open
5
-
-
... More
110 mm dia. Open
5
-
-
... More
150 mm dia.
5
-
-
... More
Providing and constructing masonry INSPECTION CHAMBERS up to 1000 mm depth in 230 mm thick conventional brick masonry in C.M. 1:6,including excavation up to required depth in all kind of strata, 100 mm thick 1:3:6 P.C.C. bedding, plaster in C.M. 1:4 from inside & outside surfaces with smooth cement plaster rendering on the internal surface, haunches, channels including pre cast concrete (M25 ) heavy duty frame and perforated/plain cover fixed in cement Concrete 1:2:4 and three coats of bituminous paint to the frame and cover.
-
-
-
... More
600 mm x 450 mm
1
-
-
... More
600 mm x 900 mm
9
-
-
... More
450 mm x 450 mm
9
-
-
... More
300 mm x 300 mm
1
-
-
... More
INTERNAL SANITARY,WATER SUPPLY & DRAINAGE WITH EXTERNAL SEWAGE SYSTEM
-
-
-
... More
DRAINAGE
-
-
-
... More
Providing & Placing Heavy Duty Readymade FRP Cover of brand like Fibrocast or equivalent with lifting & placing arrangement.
-
-
-
... More
450 X 450
1
-
-
... More
450 X 600
2
-
-
... More
600 X 900
1
-
-
... More
TOTAL FOR DRAINAGE
-
-
-
... More
WATERPROOFING
-
-
-
... More
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of Toilets, Sunk Portions, roofs, balconies, terraces etc consisting of following operations:
-
-
-
... More
a) Applying a slurry coat of neat cement using 2.75 kg/sqm. of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 450mm height including cleaning the surface before treatment and laying min.20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 450 mm height including rounding of junctions of walls and slabs, etc. complete.
-
-
-
... More
b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse river sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse river sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs.
-
-
-
... More
c) After two days of proper curing applying a second coat of cement slurry using 2.75kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge.
-
-
-
... More
d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3mm deep.
-
-
-
... More
e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-Charge :
-
-
-
... More
With average thickness of 150mm and minimum thickness at lowest point as 75 mm.
1720
-
-
... More
Providing and laying in position Waterproof Plaster min 20mm thk, in C.M:1:3 to vertical and horizontal ,inside faces of overhead or underground Water storage tanks, Rain water Gutters ,reverberation chamber at any level , including proper hacking of concrete /plastered surface ,including approved proofing compound conforming to IS :2645 and approved by the Engineer, including curing ,etc. complete.
75
-
-
... More
Laying brick bats with mortar using Broken Bricks/brick bats 25 mm to 115mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse river sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to be used for increased thickness or extra filling areas , including curing etc. complete.
10
-
-
... More
TOTAL FOR WATERPROOFING
-
-
-
... More
DISMANTLING & DEMOLISHING
-
-
-
... More
Demolishing R.C.C. Work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material outside ARAI plot area, at a location pre approved by MIDC or of contractors choice out side MIDC, at any lead at contractor's own risk , including stacking ,spreading or levelling etc. complete
48
-
-
... More
Extra for cutting Reinforcement Bars manually/ by mechanical means in R.C.C. or R.B. work (Payment shall be made on the cross sectional area of R.C.C. or R.B. work) as per direction of Engineer - in -charge.
100
-
-
... More
Demolishing Brick Masonry Work manually/ by mechanical means including stacking and disposal of unserviceable material outside ARAI plot area, at a location pre approved by MIDC or of contractors choice out side MIDC, at any lead at contractor's own risk , including stacking ,spreading or levelling etc. complete. In cement mortar
245
-
-
... More
Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 500 meters lead: cleaning etc completed as per direction of Engineer - in -charge. Of area beyond 3 sq. meters
6
-
-
... More
Dismantling Steel work in single sections including dismembering and stacking within 500 meters lead in: cleaning etc completed as per direction of Engineer - in -charge. R.S. Joists
100
-
-
... More
Channels, angles, tees and flats
100
-
-
... More
Dismantling Steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 500 meters lead. cleaning etc completed as per direction of Engineer - in -charge.
100
-
-
... More
Making Core Cuts in RC members using high speed core cutting machine cleaning etc completed as per direction of Engineer - in -charge.
-
-
-
... More
Up to 150 dia , and 300mm length
10
-
-
... More
From 160mm to 250mm, 350mm length
10
-
-
... More
Making Core Cuts in wall with Brick work /plaster etc. using high speed core cutting machine cleaning etc completed as per direction of Engineer - in -charge.
-
-
-
... More
Up to 150 dia , and 300mm length
40
-
-
... More
From 160mm to 250mm, 350mm length
40
-
-
... More
Removing and stacking existing Paving Blocks from road area, within 100 m etc completed as per direction of Engineer - in -charge.
375
-
-
... More
Removing and stacking existing Kerb stones, including any excavation required , from road area within 100 m etc completed as per direction of Engineer - in -charge.
20
-
-
... More
Dismantling , removing , and stacking material from Breaking UCR wall cleaning etc completed as per direction of Engineer - in -charge.
14.5
-
-
... More
TOTAL FOR DISMANTLING & DEMOLISHING
-
-
-
... More
MISCELLANEOUS WORKS
-
-
-
... More
Providing , and laying and jointing in position and required slope, RCC Hume Pipe with Spigot, NP 4 grade of various diameters ,below Roads or Plinth for cable crossings, including providing bed concrete of average 100mm thk , M10 grade , over a compacted bed , including construction of Brick masonry chambers in C.M.1:4 ,plaster to chamber , Precast chamber with Frame & Heavy duty cover ,excluding cost of Chamber ,chamber cover , and Cement bed to be paid under respective items.
-
-
-
... More
150mm Dia pipe
5
-
-
... More
300mm dia pipe
5
-
-
... More
450mm dia pipe
90
-
-
... More
600mm dia pipe
90
-
-
... More
Providing and laying concrete Paving Block using rubber mould ,of approved shape & loading capacity laid on 50mm thick compacted mix of crushed sand and 12mm grit cushion including required slope, camber compacting with mechanical compactor etc. as directed etc . Complete with Minimum concrete Grade of M30.
-
-
-
... More
60 TO 65mm thick ( 30 MT )
165
-
-
... More
80 mm thick ( 45 MT )
190
-
-
... More
Fixing only Paving blocks stacked at site from old work , laid on 50mm thick compacted mix of crushed sand and 10mm grit cushion including required slope, camber compacting with mechanical compactor etc. as directed etc . Complete.
10
-
-
... More
Providing & laying at all heights and depths approved Non-Shrink Grout ( Sika) under equipment / column base plates, etc. including chipping the concrete surface, cleaning, laying, finishing the surfaces smooth, curing etc. complete as specified and directed.
0.5
-
-
... More
Providing and fixing,16 g., SS 304 Railing with SS 304 Branded Hand Rail manufactured by D line or Jaguar or equivalent consisting of one top rail 40mm dia. ( S.S. ) and Three pipes below of 25mm dia. (S.S.) including closing both end, approximately 1 meter center, including necessary stainless steel fittings such as bends, elbows etc. (if required) all welded to give one piece of appearance without burrs or protuberances, bent to required shape to follow staircase profile, fixed to side of steps with M S insert plate appropriately of size 150mmx125mmx6mm thk painted with one coat primer & two coats of synthetic enamel paint as per design etc. complete. Height of Railing above staircase paradi - 600 mm to 750 mm.
63
-
-
... More
Providing and fixing, REMOVABLE 16 g., SS 304 Railing with SS 304 branded Hand Rail manufactured by D line or Jaguar or equivalent consisting of one top rail 40mm dia. ( S.S. ) and four pipes below of 25mm dia. (S.S.) including closing both end, approximately 1 meter center, including necessary stainless steel fittings such as bends, elbows etc. (if required) all welded to give one piece of appearance without burrs or protuberances, bent to required shape profile, fixed to side of steps with appropriate M S inserts appropriately of size 150mmx125mmx6mm thk painted with one coat primer & two coats of synthetic enamel paint as per design etc. complete.
20
-
-
... More
Supplying and fixing 4 mm thick Aluminium Composite Panel Cladding of make ‘EUROBOND’ in perfect line and plumb, approved Colours and shade with metallic finish. Aluminium Composite Panel shall consist of two Aluminium sheets (Alu. Alloy – 1100 H18) 0.50 mm thickness and 3 mm thick antitoxic Polyethylene core. Aluminium foil PVDF coated (PVDF Coating 30 to 32 micron). Frame made from 38 X 19 X 2 mm thick Aluminium Channel fixed to the beam/slab and wall with aluminium plated screws, fasteners and aluminium brackets whenever required. Fixing over it 4 mm aluminium composite panel bended at edges fixed with powder coated aluminium cleats fixed with proper rivets fixing the tray to the frame with sheet metal cadmium plated screws and filling the joints with Backer rods (Polyethylene 12 mm dia backer rod) and sealing the gaps. Joints with approved silicon weather Sealant (Dow Corning 789/Wacker 305).
68
-
-
... More
Providing & fixing Single Glass Glazing Unit for staircase as per architectural drawing ,using aluminium section (16g) with 6mm thick tinted toughened glass with required size of frame as per supplier design, with 0.5sqm openable window per staircase flight, providing and applying appropriate sealant etc complete. (The Contractor shall have to get the shop drawings approved from the Architects before fabrication) (Rate should be including with Openable windows (including fittings) in glazing with 0.5 Sqm opening area per staircase flight).
250
-
-
... More
Providing and fixing in position Anchor Fasteners of required length and diameter with chemical grout ,Fisher, Hilti or Equivalent make as per manufacturers instructions including drilling , placing the bolt and certifying the strength etc. complete, with adequate anchor length to develop full strength of the bar, and proving the strength by conducting pull out test at site on a random sample etc. complete.
-
-
-
... More
Dia 12mm, min. anchor inside concrete 160mm
25
-
-
... More
Dia 16mm, min. anchor inside concrete 160mm
25
-
-
... More
Dia 20mm min anchorage inside concrete 180mm
5
-
-
... More
Providing and fixing in position Rebars with Chemical Grout OF HILTI OR equivalent as per manufacturers instructions including drilling , placing the bolt as chemical anchor , and certifying the strength etc. complete, with anchor length to develop full strength of the bar, and proving the strength by conducting pull out test at site on a random sample etc. complete.
-
-
-
... More
Bar dia 10mm
50
-
-
... More
Bar dia 12mm
100
-
-
... More
Bar dia 16mm
100
-
-
... More
Bar dia 20mm
100
-
-
... More
Bar dia 25mm
50
-
-
... More
Bar dia 8mm
100
-
-
... More
Rates on daily basis for providing Skilled workers,8 hr shift/day per person including required tools and tackles.
100
-
-
... More
Rates on daily basis for providing Unskilled workers ,8 hr shift/day per person, including required tools & tackles.
100
-
-
... More
Providing and fixing tiled False Ceiling of approved materials of size 595x595 mm in true horizontal level suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 gsm/Sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25mm made of 0.30mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross T of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, rawings and as directed by Engineer-in-charge. For Goniometer 1,2,3- Black colour( Mat Finish) for Aluminium Grid & Sheet required.
800
-
-
... More
Providing & fixing Hot dip Galvanised Steel/Aluminium Metal false Ceiling panels , Double frame - DP12 carrier with C channel or U-profile manufactured from high quality pre coated GI / powder quoted alloy , Fireproof, Moisture-Proof, Mould-Proof, Smoke-Proof, Sound-Absorbing, easy to install, clean, & remove. With Plain and Perforated surface Light weight panels. Specification: Lay in Panel Size: 600 x 600 mm , Smooth surface treatment, Pre- Coated GI Powder coated Fireproof, Moisture-Proof, Mould-Proof, Smoke-Proof, Sound-Absorbing, Thickness: 0.5 mm Light reflection (%): 85 Humidity resistance; (% RH): 100 , Perforation diameter: 1.7 mm - 2.5 mm Noise Reduction Co-efficient (NRC): 0.5 – 0.8 with Ten (10) years warranty.etc with all complete.
30
-
-
... More
Providing and applying " Kemperol V210 " treatment or equivalent treatment to glued to Metal and or concrete Surfaces , Horizontal or Vertical Joints of any shape to act as a Waterproofing membrane with guarantee and application of the system by authorised applicator as per the specifications of manufacturer etc. complete.
75
-
-
... More
Providing & laying Bricks over pipes/cables in trenches Single layers 75mm thk. Brunt Bricks etc. Completed as directed by Engineer-In-Charge.
20
-
-
... More
Providing & Filling trenches with Crushed sand or Grit Compacted around pipes & cables directed By Engineer In Charge.
60
-
-
... More
Providing and fixing bevelled edge Mirror of superior glass (of approved quality) complete with 6 mm thick Cementious hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
4
-
-
... More
Providing and applying branded Sun Control Films on window to reduce glare from sunlight, from brands 3M™ Sun Control Window Films or Garware or approved equivalent etc complete as directed by Engineer-in -charge.
100
-
-
... More
Providing & fixing 2hrs Fire Resistant Drywall comprised of GI framing which will be anchored in the floor and will be anchored at the top to the RCC Beam or RCC slab & Double Layer of 12.5 mm Fire Resistant gypsum plasterboard (Conforming to IS 2095 Part 1:2011) on either sides of GI framing with horizontal & vertical joints of the boards are staggered by 600 mm is then screw fixed to the framing by self tapping drywall screws at 300 mm c/c. Jointing between two boards is achieved by applying glass fibre tape & compound to make it flush finish etc. complete. The wall should withstand lateral pressure of 20 kg/ sq. mtr designed as Medium Duty wall & should not exceed deflection L/240. The perimeter of the wall will have necessary backer rod & fire rated sealant. Generic fire certificate as per latest standard codes will be accepted as the authentic document.
245
-
-
... More
Providing & Applying one coat primer+Two coats of Heat Reflective paint of approved brand and as per manufactures instructions SRI index 170 to be maintained.( Sunace premium Acrylic heat insulating anti carbonation coating from Sunanda Chemicals) .
1350
-
-
... More
Laying at or near ground level , available KERB stones of ,in position , to required line and level and curvature, joined with C.M.: 1:3 ,,including making joints , with or without grooves, ( thickness of joints ,except at curves will Not be more than 5mm.) ,including making drainage openings where ever required complete etc. as per direction of Engineer-In -Charge, ( Length of finished kerb edging shall be measured for payment ) , including required excavation, including fixing in the concrete bed of M10 grade of 100mm thk, curing , etc. complete, Using Stocked / available at site Kerb Stone
20
-
-
... More
Providing & fixing 2mm Vinyl Flooring ( Black Colour mat finish) pasting with required chemicals in line, level, etc completed as per direction of Engineer - in- charge.
615
-
-
... More
TOTAL FOR MISCELLANEOUS WORKS
-
-
-
... More
TOTAL COST
-
-
-
... More
TOTAL GST
-
-
-
... More
TOTAL COST INCLUDING GST
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements