Airports Authority Of India Tender

3.5 C x 300 Sqmm

Supply of PVC insulated, PVC sheathed unarmoured copper conductor cable of 1.1KV grade confirming to IS 7098 (Part I) 1988 with upto date amendments etc as required for the following sizes.(Make : As per approved list.)

3C X 2.5 Sqmm

Supplying and Laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering. Taking out existing CC interlocking paver block from footpath wherever available and laying same CC interlocking paver block after refilling the trench and making good the same etc., complete as required.

63 mm dia (OD-63 mm & ID-51 mm nominal)

90 mm dia (OD-90 mm & ID-76 mm nominal)

120 mm dia (OD-120 mm & ID-103 mm nominal)

Supplying and fixing of 25 mm of uPVC pipe along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

Supplying and fixing of 25 mm of uPVC pipe along with accessories complete with fitting and cutting, jointing etc.direct in ground (50 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.

Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of following size in the existing RCC/HUME/Metal/HDPE/PVC pipe as required.

Upto 35 sq. mm.

Above 35 sq. mm and upto 95 sq. mm

Above 185 sq. mm and upto 400 sq. mm

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

4 x 16 sqmm (28 mm)

3.5 x 50 Sqmm (35 mm)

3.5 x 300 Sqmm (70mm)

Supplying and making straight through joint with heat shrinkable kit including ferrules and other jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

3.5 x 300 Sqmm

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. With charcoal/coke and salt as required.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.

SITC of Loop in - Loop out SMC boxes made of ABS plastic for street light poles of size 205 mm x 255 mm x 112 mm including provision of suitable size of hole for incoming & outgoing cables, SP-MCB (6A) and pole mounting arrangement complete as required.

SITC of 4 pole MCCB, 630A, 50KA in exisiting panel and supply & fixing of suitable size copper busbar using bimetalic washer at incoming and outgoing of MCCB terminal complete etc as required.

SITC of outdoor type feeder pillar box of size 1 M X 0.7 M X 0.3 M with mounting frame of 50mmX50mmX5mm thick of MS angle and 0.5 m long four legs of same size angles with door weather proof fabricated from 14 SWG MS sheet duly inhibited dust and vermin proof and powder coated complete with rubber gasket, hinged double doors having IP 65 protection, removable gland plate for cable entry and to be mounted in CC base of suitable size etc i/c cement concrete foundation including following switchgears complete as required. 1) 250 A 4 Strip aluminium busbar chamber with DMC/SMC supporting insulators and MS shrouding - 1 set. 2)FP MCCB- 250A, 35KA - (Incoming) 1 No. 3)FP MCB- 63A, 10KA - (outgoing)-4 Nos. 4)Energy Meter (Three Phase ) - 01 No. (with set of suitable size CT's) 5)R,Y,B Pilot indicating lamps (Cluster LED type) with 6 nos. control 6 Amp. SP MCB -1 Set for incomers. 6)(0-24 Hrs) Astronomical timer switch with 63A FP power contactor having coil voltage 230V AC -01 No.

Supplying and Installation of plastic body exhaust fan (i/c louvers/ shutters) of 200 mm sweep, 1300 rpm, operating on 230 V AC, 50 Hz power supply, in the existing opening using suitable size SS double nut & bolt with spring washer & plain washer, including making good the damage, connection, testing, commissioning etc. as required.

Supplying and Installation of plastic body exhaust fan (i/c louvers/ shutters) of 150 mm sweep, 1300 rpm, operating on 230 V AC, 50 Hz power supply, in the existing opening using suitable size SS double nut & bolt with spring washer & plain washer, including making good the damage, connection, testing, commissioning etc. as required.

Supplying and Installation of Aluminum composite panel sheet (ACP) of 5 mm thickness for the exiting opening using metal screws of required size and cutting suitable size opening for installation of exhaust fan 150/200 mm sweep etc. as required.

Supply of pole made out of 50mm 'B' Class G.I. Pipe of 6 mtrs. length with 150 x 150 x 5mm thick bottom M.S. plate in ground, errection of pole with 1:2:4 PCC foundation and pedestal of size 2x2x0.15M thick around the pole, I/T/C of post top light luminaire on top of the existing pole and painting with two coats of silver paint etc. as required.

Supply of 25W LED post-top light luminaire,made of spun aluminium landscape with high power LEDs with lamp Compartment having IP65 suitable for operation on single phase, 230 Volts, 50HZ, AC power supply including LED lamp and all accessories etc., as required (Make: Havells, Model: RUBYPT25WLED830SSYMTOPC or equivalent).