Agharkar Research Institute Tender

Sofa side table , Provision of customised Sofa side table 2inch 0inch X 2inch 0inch

Main Desk , Providing and fixing L shaped Main desk with storage for in charge office.

Roller Blinds , Provision of roller blinds with pelmets for windows

Sofa Set , Premium quality 3plus2 seater sofa set

Executive Chairs , Provision of Executive visitor chairs Revolving

Boss Chair , Provision of premium boss chair Revolving

Wash Basin , Providing and fixing wash basin with C.I. brackets 15 mm C.P. brass pillar taps 32 mm C.P. brass waste of standard pattern including painting of fittings and brackets cutting and making good the walls wherever require White Vitreous China Wash basin size 630 x 450 mm with a pair of 15 mm C.P. brass pillar taps

Brick and Masonary , Constructing brick masonry road gully chamber 50 x 45 x 60 cm with bricks in cement mortar 1.4 1 cement 4 coarse sand including 500 x 450 mm pre cast R.C.C. horizontal grating with frame complete as per standard design With common burnt clay F.P.S. non modular bricks of class designation 7.5

Provision of Plaster , provision of plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground all complete as per direction of Engineer in Charge

Dismantling , Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead For thickness of tiles above 25 mm and up to 40 mm

Lustre Paint , Providing and applying interior wall finish lustre of approved make on internal wall surface as detailed below Scrapping the surface with emery paper and wipe clean wall primer with brush with mineral turpentine with brush 8 to 10per and oil 15 to 20 per with roller and allowing to dry for a period 6 to 8 hours. Wall putty with appropriate proportion of water allowing to dry for period 4 to 6 hours. Scrapping with Emery paper 180 and wipe clean. Applying wall primer with brush with mineral turpentine 8 to 10per and oil 15 to 20per with roller Scrapping Emery paper 320 and wipe clean interior wall finish lustre 1st coat with brush rubber spray with mineral turpentine 7 to 9per and Oil with roller 19 to 21per After 8 hours of activity Applying 2nd coat or wall finish Lustre with mineral turpentine 7 to 9per with brush and Oil with roller 19 to 21per after allowing dry for the period of 6 to 8 hours activity.

False Ceiling framework , Providing and fixing framework of galvanised iron for suspended false ceiling which includes galvanised iron perimeter channels of size 27mm and 0.5mm thick having one flange of 20mm and another of 30mm along with perimeter of the ceiling, fixing in brick wall partition with the help of Rawal plugs and screws suspending galvanised iron intermediate channels of size 45mm and 0.9mm thick with two flanges of 15mm each from the soffit at 1200mm centres with steel galvanised iron hanger of width 25mm x 0.5mm fasteners ceiling section of 0.5mm thickness having curved wedge of 51.5mm and two flanges of 26mm each with lips of 10.5mm fixed to the intermediate channel with the help of connecting clips and in direction perpendicular to the intermediate channel at 450 mm centres 12.5mm dry walls screws at 230mm centres fixing screws mechanically either with screw driver or drilling machine with suitable attachment etc. complete.

False ceiling boards , Providing and fixing false ceiling of 10 to 12mm thick decorative boards of fibrous plaster of Paris including scaffolding if necessary all architectural work like mouldings cornices coves domes cups as per detailed drawings and three coats of spray painting to boards etc. complete. excluding framework runners and mild steel suspenders

Electrical Light ponts , wiring for light point fan point exhaust fan point call bell point with 15. sqmm. FRLS PVC insulated copper conmductor single core cable in surface recessed steel conduit with modular switch modular plate suitable size M.S. Box and earthing the point with 1.5 sqmm FRLS PVC insulated copper conmductor single core cable etc. as required. Type A

Modular base and cover plate , Supplying and fixing following modular base and cover plate and cover plate on existing modular metal boxes etc . as required. 8 modules

base and cover plate , 12 modules

5 6 AMP Socket , Supplying and fixing suitable size G.I. box with modular plate and cover in front on surface or in recess including providing and fixing 3pin 5.6 Amp modular outlet and 5.6 Amp modular switch, connections etc. as required.

15 16 Amp Socket , Supplying and fixing fsuitable size G.I. box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 5.6 and 15.16 Amp modular outlet and 15.16 Amp modular switch connections etc. as required.

Wiring , Wiring for light power plug with 2X4 sqmm. FRLS PVC insulated copper conductor single core cable in surface or recessed steel conduit along with 1 no. 4 sqmm FRLS PVC insulated copper conductor single core cable for loop earthing as required