West Central Railway Tender

Supply and laying/connecting of 8/10/12 SWG GI wire as per requirement at site. This is to be connected with theearth pit to the installation.

Laying of cable on wall/pipe/pole. Cable shall be supplied by Railways free of cost which shall be transported by contractor from depot to site at his cost.

Cable laying DOUBLE in earth: This involves Excavation of 1000mm deep trench in 6 soil/hard murrum/tar road/below Railway track. After this the cable shall be laid and then both sides are to be covered with bricks. The rest of the trench to be refilled by sheaved earth. The cable shall be supplied free of cost by Rly's which shall have to be transported by the contractor from Rly. depot,JBP to the site 7

Excavation of cable trench in cement concrete and laying of single cable

Supply & erection of HDPE pipe 2""/ dia for crossing rly. track/platform

Cable laying single in earth etc.(LT, HT both type)This involves Excavation of 9 1000mm deep trench in soil/hard murrum/tar road/below Railway track. After this the cable shall be laid and then both sides are to be covered with bricks. The rest of the trench to be refilled by sheaved earth. The cable shall be supplied free of cost by Rly's which shall have to be transported by the contractor from Rly. depot,JBP to the site 10

Supply and erection of 50 mm dia GI pipe B class.

Circuit wiring with 2x4 sqmm copper multistranded wires (SDB panel to SB) and copper wire 1.5 sqmm green in clour for earth(2x4 Sq mm +1x1.5 Sq mm) Make- KEI, RR Cable, Finolex , Polycabe or simillar make

Circuit wiring with 2x2.5 sqmm copper multistranded wires (SDB panel to SB) and copper wire 1.5 sqmm green in clour for earth(2x2.5 Sq mm +1x1.5 Sq mm) Make- KEI, RR Cable, Finolex , Polycabe or simillar make

Point Wiring : This includes provision of wiring with 1.5 sqmm copper starnded PVC insulated wire [ L & N and earth ]from MDB/SDB/ Board to light & fan control board and provision of 13 control switch on common light and fan control board , together with wiring from control board to ceiling rose and provision of ceiling rose on board ; with earth continuity wire; independent for each fitting. Cost of this item is inclusive of distributed cost of common board & wiring from MDB/SDB/Board to common board in addition to items specifically mentioned Make- Legrand, L&T, ABB, Greatwhite or equivailent

Supply erection and commissioning of 6A 5 pin socket point on fan and light control board make- ABB, Legrand, L&T, Schnider .Greatwhite or equivalent

16A & 6 pin socket point on separate circuit and board. make- ABB, Legrand, L&T, Schnider or equivalent

Cutting of wall for insertion of 1" dia UPVC conduit, fixing hardwares for fixing the 16 conduit along with its supply and then replaster it with cement and sand mixture and then painting with matching colour as per existing colour of the wall. Proper joints in pipes, bends/elbows/ junctions are to be provided as per site requirement.

Supply Exhaust Fan 380 mm Metal Number of pole (in Nos.) 6Number of blades 3 , Power factor 0.9 ,and Erection of E/Fan 380mm sweep including Nut ,bolts, fastner etc Make- Usha, Anchor, Bajaj or equivailent Sample will be approved comptent authorty before supply

Supply and Erection of T-5 fittings/Batten type 4 feet T-8 LED / 4feet led retrofit fitting with LED tube lamp 20 W Make- Havells, bajaj, CG, or Simillar Sample will be approved comptent authorty before supply

Concealed metal box boards Supply, fixing of concealed metal box boards + modular 19 sheet platesuitable for modular switches/sockets/regulator/AC point/Geyser etc. front open type (for concealedwiring). This includes masonry work happened at the time of execution of the work and its associatedrepairs. All material required for this job will be supplied by contractor. : Four module box of HPL,legrand, indoasian, or equivalent

Concealed metal box boards Supply, fixing of concealed metal box boards + modular 20 sheet platesuitable for modular switches/sockets/regulator/AC point/Geyser etc. front open type (for concealedwiring). This includes masonry work happened at the time of execution of the work and its associatedrepairs. All material required for this job will be supplied by contractor. : Six module box of HPL,legrand, indoasian, or equivalent

Concealed metal box boards Supply, fixing of concealed metal box boards + modular 21 sheet platesuitable for modular switches/sockets/regulator/AC point/Geyser etc. front open type (for concealedwiring). This includes masonry work happened at the time of execution of the work and its associatedrepairs. All material required for this job will be supplied by contractor. : Eight module box of HPL,legrand, indoasian, or equivalent

Cable route marker; Supply &providing cable route markersmarked with L.T./H.T. cable asrequired

"Design, manufacture, display of wall / hanging / floor mounting type LED illuminated sign / direction boards in half elliptical shape. The display sheet shall be of unbreakable 040 translucent polycarbonate sheet of 2 mm thickness. The text / graphics matter visibility shall not be less than 160 deg. The approved colour text and graphics shall be printed / router cut on monomeric 24 calendered vinyl of 70 um thickness and shall be firmly pasted on display sheets. The mounting arrangement shall be hanging, wall mounting, eiling mounting, pole mounting or floor mounting and as per site requirement. The signage shall have the integral mounting arrangements with sturdy structural frame and ACP cladding on the back side of the signage to avoid rusting and entry of dust. The LED board shall have uniform illumination with 4-8 W / sq. ft and with brightness more than ambient light. Suitable size end cap of 1.5 mm thick SS 304 should be provided." 25

Erection and installation of above said boards as per Railway's specification