Urban Administration And Development Tender

SkyWalker/StraightTrainer/Cross trainerPRODUCTAREA:-LxWxH1778mmx610mmx1828mmSAFEPLAYAREA:-2134mmx915mm • StraightTrainer/SkyWalkerequipmentmadeupof4inch “B” class GI pipe; Prime Stand duly bend,Foundationcenterpipe. • Thepedalframeismadeof3"x1"rectangularG.I. pipe. • Thehandleframeismadeof32mmODG.I.pipe. • Footrestframesupportofdimension250x100x2mm isweldedforsupportingtheAluminiumfootrest. • AluminiumFootrestofsize300mmx150mmx5mmis usedforsupportingthefoot. • ϕ60mmseamlesspipebushes. • PermanentlubricatedBallbearings6205zz/6205-2rs. • Foundationplateofdiaϕ225mmand10mmthickness isweldedatbottom. • Allweldedjointareofgoodquality. • Hightensilesteelwithgalvanizednut&boltstobe used. • TheCirclipstobeusedareof25mm. • AllenBoltsarealsousedtotightentheclosingcap. • ClosingcapofHDPE/PPCPPlasticisused. • Highqualityrubbergriparealsousedforfirmhandling

DoubleAirWalker equipment made up of 4inch “B”classGIpipe; PRODUCTAREA:-2130mmx785mmx1390mmSAFEPLAYAREA:-2590mmx1024mm • Double Air Walker PrimeStanddulybend,Foundationcenterpipe. • Thepedalframeismadeof42mmODG.I.pipe. • Thehandleframeismadeof32mmODG.I.pipe. • Footrestframesupportofdimension250x100x2mmisweldedforsupportingtheAluminiumfootrest. • AluminiumFootrestofsize300mmx150mmx5mmis usedforsupportingthefoot. • ϕ60mmseamlesspipebushes. • PermanentlubricatedBallbearings6205zz/6205-2rs. • Foundationplateofdiaϕ175mmand10mmthicknessisweldedatbottom. • Allweldedjointareofgoodquality. • Hightensilesteelwithgalvanizednut&boltstobe used. • TheCirclipstobeusedareof25mm. • AllenBoltsarealsousedtotightentheclosingcap. • ClosingcapofHDPE/PPCPPlasticisused. • ThepowdercoatingdonewithPurepolyesterpowder with60to70micronthickness.

TaichiSpinner/DoubleWheelShoulderBuilderPRODUCTAREA:-1220mmx762mmx1676mmSAFEPLAYAREA:-1828mmx1220mm • DoubleWheelShoulderBuilderequipmentmadeupof3inch“B” class GI pipe; Prime Stand duly bend,Foundationcenterpipe. • Thewheelframeismadeof42mmODG.I.pipeandthesupportingismadeof32mmODG.I.pipe. • ϕ60mmseamlesspipebushes. • PermanentlubricatedBallbearings6205zz/6205-2rs. • Foundationplateofdiaϕ175mmand10mmthickness isweldedatbottom. • Allweldedjointareofgoodquality. • Hightensilesteelwithgalvanizednut&boltstobe used. • TheCirclipstobeusedareof25mm. • AllenBoltsarealsousedtotightentheclosingcap. • ClosingcapofHDPE/PPCPPlasticisused. • ThepowdercoatingdonewithPurepolyesterpowder

TripleStandingTwisterPRODUCTAREA:-1460mmx1460mmx1370mmSAFEPLAYAREA:-1828mmx1828mm • StandingTwisterequipmentmadeupof3inch“B”classGIpipe;PrimeStandduly,Foundationcenterpipe. • Thehandleframeismadeof32mmODG.I.pipe. • Thelegframeismadeof42mmODG.I.pipe. • RoundPlateofdiaϕ300mmand10mmthicknessis joinedforstandingandtwisting. • ϕ60mmseamlesspipebushes. • PermanentlubricatedBallbearings6205zz/6205-2rs. • Foundationplateofdiaϕ175mmand10mmthicknessisweldedatbottom. • Allweldedjointareofgoodquality. • Hightensilesteelwithgalvanizednut&boltstobe used. • TheCirclipstobeusedareof25mm. • AllenBoltsarealsousedtotightentheclosingcap. • ClosingcapofHDPE/PPCPPlasticisused. • ThepowdercoatingdonewithPurepolyesterpowder

ABBTrainer/SingleSitUpBoardPRODUCTAREA:-1524mmx762mmx1220mmSAFEPLAYAREA:-2134mmx1220mm • SitUpBoardequipmentmadeupof42mmOD“B” classGIpipe;PrimeStanddulybend. • Theremainingframeismadeof32mmODG.I.pipe. • Therestingframeismadeof50mmx10mmMSFlat. • Allweldedjointareofgoodquality. • Hightensilesteelwithgalvanizednut&boltstobe used. • ThepowdercoatingdonewithPurepolyesterpowder with60to70micronthickness.

Cycle equipmentPRODUCT AREA: 915mm x 610mm x 1220mm SAFE PLAY AREA:- 1524mm x 1220mm • Cycle equipment made up of 3inch "B" class Gl pipe; Prime Stand dulv bend. Foundation center pine • The remaining frame is made of 42mm OD G.I. pipe. • MS Seat of size 380mm x 300mm x 5mm is used for seating arrangement. • c bUmm seamless pipe bushes. • Permanent lubricated Ball bearings 6205zz/6205-2rs. • Foundation plate of dia ∞200mm and 8mm thickness Is welded at bottom. • All welded joint are or good quality. • High Quality rubber grip are also used for tirm handing • High tensile steel with galvanized nut & bolts to be lused • The circlips to be used are of 2mm. • Allen Bolts are also used to tienten the closine can • Closing cap of HDPE PPCP Plastic is used. • The powder coating done with Pure polyester powder with 60 to 70 micron thickness.

Rower equipmentPRODUCT AREA: 915mm x 610mm x 1220mm SAFE PLAY AREA:- 1524mm x 1220mm • rower equipment made up of 3inch "B" class Gl pipe; Prime Stand dulv bend. Foundation center pine • The remaining frame is made of 42mm OD G.I. pipe. • MS Seat of size 380mm x 300mm x 5mm is used for seating arrangement. • c bUmm seamless pipe bushes. • Permanent lubricated Ball bearings 6205zz/6205-2rs. • Foundation plate of dia ∞200mm and 8mm thickness Is welded at bottom. • All welded joint are or good quality. • High Quality rubber grip are also used for tirm handing • High tensile steel with galvanized nut & bolts to be lused • The circlips to be used are of 2mm. • Allen Bolts are also used to tienten the closine can • Closing cap of HDPE PPCP Plastic is used. • The powder coating done with Pure polyester powder with 60 to 70 micron thickness.

CROSS TRAINERPRODUCT AREA :-L x W x H 1220mmx 762mmx 1524mm SAFE PLAY AREA:- 1828mm x 1220mm • Cross Trainer equipment made up of 3inch “A” class MS pipe; Prime Stand duly bend, Foundation center pipe. • The pedal frame is made of 40 x 40mm square MS pipe. • The handle frame is made of 32mm OD MS pipe. • Footrest frame support of dimension 250 x 100 x 2mm is welded for supporting the Aluminium footrest. •Aluminium Footrest of size 300mm x 150mm x 5mm is used for supporting the foot. • ϕ 60mm seamless pipe bushes. • Permanent lubricated Ball bearings 6205zz/6205-2rs. • Foundation plate of dia ϕ175mm and 10 mm thickness is welded at bottom. • All welded joint are of good quality. • High tensile steel with galvanized nut & bolts to be used. • The Circlips to be used are of 25mm. • Allen Bolts are also used to tighten the closing cap. • Closing cap of HDPE / PPCP Plastic is used. • High quality rubber grip are also used for firm handling. • The powder coating done with Pure polyester powder with 60 to 70 micron thickness.

SURF BOARDPRODUCT AREA :-L x W x H 915mm x 762mm x 1372mm SAFE PLAY AREA:- 1524mm x 1220mm • Surf Board equipment made up of 4inch “A” class MS pipe; Prime Stand duly bend, Foundation center pipe. • The pedal frame is made of 42mm OD MS. pipe. • The handle frame is made of 32mm OD MS. pipe. • Footrest frame support of dimension 250 x 150 x 5mm is welded for supporting the seat. • MS seat of size 380mm x 300mm x 5mm is used for supporting the foot pipe. • ϕ 60mm seamless pipe bushes. • Permanent lubricated Ball bearings 6205zz/6205-2rs. • Foundation plate of dia ϕ225mm and 10 mm thickness is welded at bottom. • All welded joint are of good quality. • High tensile steel with galvanized nut & bolts to be used. • The Circlips to be used are of 25mm. • Allen Bolts are also used to tighten the closing cap. • Closing cap of HDPE / PPCP Plastic is used. • The powder coating done with Pure polyester powder with 60 to 70 micron thickness.

Luxury SwingProductArea:9.2'Ftx6.3'Ft SafeArea:13.2'Ftx10.3'Ft AgeGroup:NA Specification: • Thisluxuryswingcaneasilyaccommodate3adultsatatime. • Itstoppipeisof50NB,whilethelegsupportsareof40mmNBB-ClassG.Ipipes. • It isprovidedwith acorrugatedPVCroof. • The seat frameisfabricatedoutof20mmNBB-ClassG.Ipipes whiletheseat ismadeup of7FRPstrips. Theswingissuspendedwiththehelpofelectro-galvanizedchain8mmthick,whichisassembledwithheavydutyballbearinghousedinspecialcasting