Urban Administration And Development Tender

Shoulder Press / Double Chest Cum -PRODUCT AREA :-1372mm x 762mm x 2134mm SAFE PLAY AREA:- 1828mm x 1220mm • Double Chest Presser equipment made up of 4inch “B” class GI pipe; Prime Stand duly bend, Foundation center pipe. • The handle frame is made of 42mm OD G.I. pipe. • The remaining frame is made of 32mm OD G.I. pipe. • Seating frame support of dimension 250 x 150 x 5mm is welded for supporting the pedal seat. • MS Seat of size 380mm x 300mm x 5mm is used for supporting the foot. • ϕ 60mm seamless pipe bushes. • Permanent lubricated Ball bearings 9506 1 450 00 45`0 00 6205zz/6205-2rs. • Foundation plate of dia ϕ225mm and 10mm thickness is welded at bottom. • All welded joint are of good quality. • High quality rubber grip are also used for firm handling. • High tensile steel with galvanized nut & bolts to be used. • The Circlips to be used are of 25mm. • Allen Bolts are also used to tighten the closing cap. • Closing cap of HDPE / PPCP Plastic is used. • The powder coating done with Pure polyester powder with 60 to 70 micron thickness. Seating Puller

Triple Standing Twister - PRODUCT AREA :-1460mm x 1460mm x 1370mm SAFE PLAY AREA:- 1828mm x 1828mm • Standing Twister equipment made up of 3inch “B” class GI pipe; Prime Stand duly, Foundation center pipe. • The handle frame is made of 32mm OD G.I. pipe. • The leg frame is made of 42mm OD G.I. pipe. • Round Plate of dia ϕ300mm and 10mm thickness is joined for standing and twisting. • ϕ 60mm seamless pipe bushes. • Permanent lubricated Ball bearings 6205zz/6205-2rs. • Foundation plate of dia ϕ175mm and 10mm thickness is welded at bottom. • All welded joint are of good quality. • High tensile steel with galvanized nut & bolts to be used.The Circlips to be used are of 25mm. • Allen Bolts are also used to tighten the closing cap. • Closing cap of HDPE / PPCP Plastic is used. • The powder coating

Cycle equipment - PRODUCT AREA: 915mm x 610mm x 1220mm SAFE PLAY AREA:- 1524mm x 1220mm • Cycle equipment made up of 3inch "B" class Gl pipe; Prime Stand dulv bend. Foundation center pine • The remaining frame is made of 42mm OD G.I. pipe. • MS Seat of size 380mm x 300mm x 5mm is used for seating arrangement. • c bUmm seamless pipe bushes. • Permanent lubricated Ball bearings 6205zz/6205-2rs. • Foundation plate of dia ∞200mm and 8mm thickness Is welded at bottom.All welded joint are or good quality. • High Quality rubber grip are also used for tirm handing • High tensile steel with galvanized nut & bolts to be lused • The circlips to be used are of 2mm. • Allen Bolts are also used to tienten the closine can • Closing cap of HDPE PPCP Plastic is used. • The powder coating done with Pure polyester powder with 60 to 70 micron thickness.