Urban Administration And Development Tender

Shoulder Press / Double Chest Cum -PRODUCT AREA :-1372mm x 762mm x 2134mm SAFE PLAY AREA:- 1828mm x 1220mm • Double Chest Presser equipment made up of 4inch “B” class GI pipe; Prime Stand duly bend, Foundation center pipe. • The handle frame is made of 42mm OD G.I. pipe. • The remaining frame is made of 32mm OD G.I. pipe. • Seating frame support of dimension 250 x 150 x 5mm is welded for supporting the pedal seat. • MS Seat of size 380mm x 300mm x 5mm is used for supporting the foot. • ϕ 60mm seamless pipe bushes. • Permanent lubricated Ball bearings 9506 1 450 00 45`0 00 6205zz/6205-2rs. • Foundation plate of dia ϕ225mm and 10mm thickness is welded at bottom. • All welded joint are of good quality. • High quality rubber grip are also used for firm handling. • High tensile steel with galvanized nut & bolts to be used. • The Circlips to be used are of 25mm. • Allen Bolts are also used to tighten the closing cap. • Closing cap of HDPE / PPCP Plastic is used. • The powder coating done with Pure polyester powder with 60 to 70 micron thickness. Seating Puller

Sky Walker / Straight Trainer/Cross trainer -PRODUCT AREA :-L x W x H 1778mm x 610mm x 1828mm SAFE PLAY AREA:- 2134mm x 915mm • Straight Trainer/Sky Walker equipment made up of 4inch “B” class GI pipe; Prime Stand duly bend, Foundation center pipe. • The pedal frame is made of 3" x 1" rectangular G.I. pipe. • The handle frame is made of 32mm OD G.I. pipe. • Footrest frame support of dimension 250 x 100 x 2mm is welded for supporting the Aluminium footrest. • Aluminium Footrest of size 300mm x 150mm x 5mm is used for supporting the foot. • ϕ 60mm seamless pipe bushes. • Permanent lubricated Ball bearings 6205zz/6205-2rs. • Foundation plate of dia ϕ225mm and 10mm thickness is welded at bottom. • All welded joint are of good quality. • High tensile steel with galvanized nut & bolts to be used. • The Circlips to be used are of 25mm. • Allen Bolts are also used to tighten 9506 1 400 00 4000 0 the closing cap. • Closing cap of HDPE / PPCP Plastic is used. • High quality rubber grip are also used for firm handling.

Double Air Walker - PRODUCT AREA :-2130mm x 785mm x 1390mm SAFE PLAY AREA:- 2590mm x 1024mm • Double Air Walker equipment made up of 4inch “B” class GI pipe; Prime Stand duly bend, Foundation center pipe. • The pedal frame is made of 42mm OD G.I. pipe. • The handle frame is made of 32mm OD G.I. pipe. • Footrest frame support of dimension 250 x 100 x 2mm is welded for supporting the Aluminium footrest. • Aluminium Footrest of size 300mm x 150mm x 5mm is used for supporting the foot. • ϕ 60mm seamless pipe bushes. • Permanent lubricated Ball bearings 6205zz/6205-2rs. • Foundation plate of dia ϕ175mm and 10 mm thickness is welded at bottom. • All welded joint are of good quality. • High tensile steel with galvanized nut & bolts to be used. • The Circlips to be used are of 25mm. • Allen Bolts are also used to tighten the closing cap. • Closing cap of HDPE / PPCP Plastic is used. • The powder coating done with Pure polyester powder with 60 to 70 micron thickness.

Taichi Spinner / Double Wheel Shoulder Builder -PRODUCT AREA :-1220mm x 762mm x 1676mm SAFE PLAY AREA:- 1828mm x 1220mm • Double Wheel Shoulder Builder equipment made up of 3inch“B” class GI pipe; Prime Stand duly bend, Foundation center pipe. • The wheel frame is made of 42mm OD G.I. pipe and thesupporting is made of 32mm OD G.I. pipe. • ϕ 60mm seamless pipe bushes. • Permanent lubricated Ball bearings 6205zz/6205-2rs. • Foundation plate of dia ϕ175mm and 10mm thickness is welded at bottom. • All welded joint are of good quality. • High tensile steel with galvanized nut & bolts to be used. • The Circlips to be used are of 25mm. • Allen Bolts are also used to tighten the closing cap. • Closing cap of HDPE / PPCP Plastic is used. • The powder coating done

Triple Standing Twister - PRODUCT AREA :-1460mm x 1460mm x 1370mm SAFE PLAY AREA:- 1828mm x 1828mm • Standing Twister equipment made up of 3inch “B” class GI pipe; Prime Stand duly, Foundation center pipe. • The handle frame is made of 32mm OD G.I. pipe. • The leg frame is made of 42mm OD G.I. pipe. • Round Plate of dia ϕ300mm and 10mm thickness is joined for standing and twisting. • ϕ 60mm seamless pipe bushes. • Permanent lubricated Ball bearings 6205zz/6205-2rs. • Foundation plate of dia ϕ175mm and 10mm thickness is welded at bottom. • All welded joint are of good quality. • High tensile steel with galvanized nut & bolts to be used.The Circlips to be used are of 25mm. • Allen Bolts are also used to tighten the closing cap. • Closing cap of HDPE / PPCP Plastic is used. • The powder coating

ABB Trainer / Single Sit Up Board -PRODUCT AREA :-1524mm x 762mm x 1220mm SAFE PLAY AREA:- 2134mm x 1220mm • Sit Up Board equipment made up of 42mm OD “B” class GI pipe; Prime Stand duly bend. • The remaining frame is made of 32mm OD G.I. pipe. • The resting frame is made of 50mm x 10mm MS Flat. • All welded joint are of good quality. • High tensile steel with galvanized nut & bolts to be used. • The powder coating done with Pure polyester powder with 60 to 70 micron thickness.

Cycle equipment - PRODUCT AREA: 915mm x 610mm x 1220mm SAFE PLAY AREA:- 1524mm x 1220mm • Cycle equipment made up of 3inch "B" class Gl pipe; Prime Stand dulv bend. Foundation center pine • The remaining frame is made of 42mm OD G.I. pipe. • MS Seat of size 380mm x 300mm x 5mm is used for seating arrangement. • c bUmm seamless pipe bushes. • Permanent lubricated Ball bearings 6205zz/6205-2rs. • Foundation plate of dia ∞200mm and 8mm thickness Is welded at bottom.All welded joint are or good quality. • High Quality rubber grip are also used for tirm handing • High tensile steel with galvanized nut & bolts to be lused • The circlips to be used are of 2mm. • Allen Bolts are also used to tienten the closine can • Closing cap of HDPE PPCP Plastic is used. • The powder coating done with Pure polyester powder with 60 to 70 micron thickness.

Rower equipment- PRODUCT AREA: 915mm x 610mm x 1220mm SAFE PLAY AREA:- 1524mm x 1220mm • rower equipment made up of 3inch "B" class Gl pipe; Prime Stand dulv bend. Foundation center pine • The remaining frame is made of 42mm OD G.I. pipe. • MS Seat of size 380mm x 300mm x 5mm is used for seating arrangement. • c bUmm seamless pipe bushes. • Permanent lubricated Ball bearings 6205zz/6205-2rs. • Foundation plate of dia ∞200mm and 8mm thickness Is welded at bottom. • All welded joint are or good quality. • High Quality rubber grip are also used for tirm handing • High tensile steel with galvanized nut & bolts to be lusedThe circlips to be used are of 2mm. • Allen Bolts are also used to tienten the closine can • Closing cap of HDPE PPCP Plastic is used. • The powder coating done with Pure polyester powder with 60 to 70 micron thickness.

CROSS TRAINER- PRODUCT AREA :-L x W x H 1220mmx 762mmx 1524mm SAFE PLAY AREA:- 1828mm x 1220mm • Cross Trainer equipment made up of 3inch “A” class MS pipe; Prime Stand duly bend, Foundation center pipe. • The pedal frame is made of 40 x 40mm square MS pipe. • The handle frame is made of 32mm OD MS pipe. • Footrest frame support of dimension 250 x 100 x 2mm is welded for supporting the Aluminium footrest. •Aluminium Footrest of size 300mm x 150mm x 5mm is used for supporting the foot. • ϕ 60mm seamless pipe bushes. • Permanent lubricated Ball bearings 6205zz/6205-2rs. • Foundation plate of dia ϕ175mm and 10 mm thickness is welded at bottom. • All welded joint are of good quality. • High tensile steel with galvanized nut & bolts to be used. • The Circlips to be used are of 25mm. • Allen Bolts are also used totighten the closing cap. • Closing cap of HDPE / PPCP Plastic is used. • High quality rubber grip are also used for firm handling. • The powder coating done with Pure polyester powder with 60 to 70 micron thickness.

SURF BOARD -PRODUCT AREA :-L x W x H 915mm x 762mm x 1372mm SAFE PLAY AREA:- 1524mm x 1220mm • Surf Board equipment made up of 4inch “A” class MS pipe; Prime Stand duly bend, Foundation center pipe. • The pedal frame is made of 42mm OD MS. pipe. • The handle frame is made of 32mm OD MS. pipe. • Footrest frame support of dimension 250 x 150 x 5mm is welded for supporting the seat. • MS seat of size 380mm x 300mm x 5mm is used for supporting the foot pipe. • ϕ 60mm seamless pipe bushes. • Permanent lubricated Ball bearings 6205zz/6205-2rs. • Foundation plate of dia ϕ225mm and 10 mm thickness is welded at bottom. • All welded joint are of good quality. • High tensile steel with galvanized nut & bolts to be used. • The Circlips to be used are of 25mm. • Allen Bolts are also used to tighten the closing cap.Closing cap of HDPE / PPCP Plastic is used. • The powder coating done with Pure polyester powder with 60 to 70 micron thickness.